arch/arm/mach-mt8127/kr076_nand/power/cust_charging.h

   1 #ifndef _CUST_BAT_H_
   2 #define _CUST_BAT_H_
   3
   4 /* stop charging while in talking mode */
   5 #define STOP_CHARGING_IN_TAKLING
   6 #define TALKING_RECHARGE_VOLTAGE 3800
   7 #define TALKING_SYNC_TIME                  60
   8
   9 /* Battery Temperature Protection */
  10 #define MTK_TEMPERATURE_RECHARGE_SUPPORT
  11 #define MAX_CHARGE_TEMPERATURE  55
  12 #define MAX_CHARGE_TEMPERATURE_MINUS_X_DEGREE   50 //47 Fixed to 50 degree for according to  standard
  13 #define MIN_CHARGE_TEMPERATURE  2
  14 #define MIN_CHARGE_TEMPERATURE_PLUS_X_DEGREE    4  //6 Fixed to 2 degree accoding to TCL standard
  15 #define MAX_LIMIT_CHARGE_TEMPERATURE    45
  16 #define MIN_LIMIT_CHARGE_TEMPERATURE    43
  17 /* [PLATFORM]-ADD-BEGIN by TCTSZ huichen@tcl.com, 05/21/2015,  BATTERY Notify PR-1007717*/
  18 #define MAX_RAISING_CHARGE_TEMPERATURE    58
  19 #define MIN_DROPPING_CHARGE_TEMPERATURE    -18
  20 /* [PLATFORM]-ADD-END by TCTSZ huichen@tcl.com*/
  21 #define ERR_CHARGE_TEMPERATURE  0xFF
  22
  23 /* Linear Charging Threshold */
  24 #define V_PRE2CC_THRES                  3400    //mV
  25 #define V_CC2TOPOFF_THRES               4050
  26 #define RECHARGING_VOLTAGE      4110
  27 #define CHARGING_FULL_CURRENT    230    //mA
  28
  29 /* Charging Current Setting */
  30 //#define CONFIG_USB_IF
  31 #define USB_CHARGER_CURRENT_SUSPEND                     0               // def CONFIG_USB_IF
  32 #define USB_CHARGER_CURRENT_UNCONFIGURED        CHARGE_CURRENT_70_00_MA // 70mA
  33 #define USB_CHARGER_CURRENT_CONFIGURED          CHARGE_CURRENT_500_00_MA        // 500mA
  34
  35 #define USB_CHARGER_CURRENT                                     CHARGE_CURRENT_500_00_MA        //500mA
  36 #define AC_CHARGER_CURRENT                                  CHARGE_CURRENT_1000_00_MA
  37 #define NON_STD_AC_CHARGER_CURRENT                      CHARGE_CURRENT_1000_00_MA
  38 #define CHARGING_HOST_CHARGER_CURRENT       CHARGE_CURRENT_650_00_MA
  39 #define APPLE_0_5A_CHARGER_CURRENT          CHARGE_CURRENT_500_00_MA
  40 #define APPLE_1_0A_CHARGER_CURRENT          CHARGE_CURRENT_650_00_MA
  41 #define APPLE_2_1A_CHARGER_CURRENT          CHARGE_CURRENT_800_00_MA
  42
  43
  44 /* Precise Tunning */
  45 #define BATTERY_AVERAGE_DATA_NUMBER     3
  46 #define BATTERY_AVERAGE_SIZE    30
  47
  48 /* charger error check */
  49 /* [PLATFORM]-Add-BEGIN by TCTSZ.leo.guo, 04/15/2015,  modify ntc temperature function */
  50 #define BAT_LOW_TEMP_PROTECT_ENABLE         // stop charging if temp < MIN_CHARGE_TEMPERATURE
  51 /* [PLATFORM]-Add-END by TCTSZ.leo.guo */
  52 #define V_CHARGER_ENABLE 0                              // 1:ON , 0:OFF
  53 /* [PLATFORM]-MOD-BEGIN by TCTSZ huichen@tcl.com, 05/18/2015,  modify OVP function FR-1005346*/
  54 //#define V_CHARGER_MAX 6500                            // 6.5 V
  55 #define V_CHARGER_MAX 6900                              // 6.9 V
  56 /* [PLATFORM]-MOD-END by TCTSZ huichen@tcl.com, 05/18/2015*/
  57 #define V_CHARGER_MIN 4400                              // 4.4 V
  58
  59 /* Tracking TIME */
  60 #define ONEHUNDRED_PERCENT_TRACKING_TIME        10      // 10 second
  61 #define NPERCENT_TRACKING_TIME                          20      // 20 second
  62 #define SYNC_TO_REAL_TRACKING_TIME              60      // 60 second
  63 #define V_0PERCENT_TRACKING                                                     3400 //3400mV
  64
  65 /* Battery Notify */
  66 #define BATTERY_NOTIFY_CASE_0001_VCHARGER
  67 #define BATTERY_NOTIFY_CASE_0002_VBATTEMP
  68 //#define BATTERY_NOTIFY_CASE_0003_ICHARGING
  69 //#define BATTERY_NOTIFY_CASE_0004_VBAT
  70 //#define BATTERY_NOTIFY_CASE_0005_TOTAL_CHARGINGTIME
  71
  72 /* JEITA parameter */
  73 //#define MTK_JEITA_STANDARD_SUPPORT
  74 #define CUST_SOC_JEITA_SYNC_TIME 30
  75 #define JEITA_RECHARGE_VOLTAGE  4110    // for linear charging
  76 #define JEITA_TEMP_ABOVE_POS_60_CV_VOLTAGE              BATTERY_VOLT_04_100000_V
  77 #define JEITA_TEMP_POS_45_TO_POS_60_CV_VOLTAGE  BATTERY_VOLT_04_100000_V
  78 #define JEITA_TEMP_POS_10_TO_POS_45_CV_VOLTAGE  BATTERY_VOLT_04_200000_V
  79 #define JEITA_TEMP_POS_0_TO_POS_10_CV_VOLTAGE   BATTERY_VOLT_04_100000_V
  80 #define JEITA_TEMP_NEG_10_TO_POS_0_CV_VOLTAGE   BATTERY_VOLT_03_900000_V
  81 #define JEITA_TEMP_BELOW_NEG_10_CV_VOLTAGE              BATTERY_VOLT_03_900000_V
  82
  83 /* For JEITA Linear Charging only */
  84 #define JEITA_NEG_10_TO_POS_0_FULL_CURRENT  120 //mA
  85 #define JEITA_TEMP_POS_45_TO_POS_60_RECHARGE_VOLTAGE  4000
  86 #define JEITA_TEMP_POS_10_TO_POS_45_RECHARGE_VOLTAGE  4100
  87 #define JEITA_TEMP_POS_0_TO_POS_10_RECHARGE_VOLTAGE   4000
  88 #define JEITA_TEMP_NEG_10_TO_POS_0_RECHARGE_VOLTAGE   3800
  89 #define JEITA_TEMP_POS_45_TO_POS_60_CC2TOPOFF_THRESHOLD 4050
  90 #define JEITA_TEMP_POS_10_TO_POS_45_CC2TOPOFF_THRESHOLD 4050
  91 #define JEITA_TEMP_POS_0_TO_POS_10_CC2TOPOFF_THRESHOLD  4050
  92 #define JEITA_TEMP_NEG_10_TO_POS_0_CC2TOPOFF_THRESHOLD  3850
  93
  94
  95 #ifdef CONFIG_MTK_FAN5405_SUPPORT
  96 #define FAN5405_BUSNUM 1
  97 #endif
  98
  99 #ifdef CONFIG_MTK_BQ24158_SUPPORT
 100 #define BQ24158_BUSNUM 1
 101 #endif
 102
 103 #ifdef CONFIG_MTK_BQ24296_SUPPORT
 104 #define BQ24296_BUSNUM 1
 105 #endif
 106
 107 #ifdef CONFIG_MTK_BQ24297_SUPPORT
 108 #define BQ24297_BUSNUM 1
 109 #endif
 110
 111 /* High battery support */
 112 //#define HIGH_BATTERY_VOLTAGE_SUPPORT
 113
 114 /* Disable Battery check for HQA */
 115 #ifdef MTK_DISABLE_POWER_ON_OFF_VOLTAGE_LIMITATION
 116 #define CONFIG_DIS_CHECK_BATTERY
 117 #endif
 118
 119
 120 //#define MTK_WIRELESS_CHARGER_SUPPORT 1
 121 /* [PLATFORM]-Add-BEGIN by TCTSZ.leo.guo, 04/15/2015,  modify ntc temperature function */
 122 #define MTK_BATTERY_PROTECT_FEATURE
 123 /* [PLATFORM]-Add-END by TCTSZ.leo.guo */
 124 /* Pump Express support (fast charging) */
 125 #ifdef CONFIG_MTK_PUMP_EXPRESS_SUPPORT
 126 #define TA_START_VCHR_TUNUNG_VOLTAGE    3400
 127 #define TA_CHARGING_CURRENT                         CHARGE_CURRENT_1500_00_MA
 128 #undef V_CHARGER_MAX
 129 #ifdef TA_9V_SUPPORT
 130 #define V_CHARGER_MAX 9500                              // 9.5 V
 131 #else
 132 #define V_CHARGER_MAX 6000                              // 6.0 V
 133 #endif
 134 #endif
 135
 136 #endif /* _CUST_BAT_H_ */