Documentation/scsi/scsi-parameters.txt

   1                           SCSI Kernel Parameters
   2                           ~~~~~~~~~~~~~~~~~~~~~~
   3
   4 See Documentation/admin-guide/kernel-parameters.rst for general information on
   5 specifying module parameters.
   6
   7 This document may not be entirely up to date and comprehensive. The command
   8 "modinfo -p ${modulename}" shows a current list of all parameters of a loadable
   9 module. Loadable modules, after being loaded into the running kernel, also
  10 reveal their parameters in /sys/module/${modulename}/parameters/. Some of these
  11 parameters may be changed at runtime by the command
  12 "echo -n ${value} > /sys/module/${modulename}/parameters/${parm}".
  13
  14
  15         advansys=       [HW,SCSI]
  16                         See header of drivers/scsi/advansys.c.
  17
  18         aha152x=        [HW,SCSI]
  19                         See Documentation/scsi/aha152x.txt.
  20
  21         aha1542=        [HW,SCSI]
  22                         Format: <portbase>[,<buson>,<busoff>[,<dmaspeed>]]
  23
  24         aic7xxx=        [HW,SCSI]
  25                         See Documentation/scsi/aic7xxx.txt.
  26
  27         aic79xx=        [HW,SCSI]
  28                         See Documentation/scsi/aic79xx.txt.
  29
  30         atascsi=        [HW,SCSI]
  31                         See drivers/scsi/atari_scsi.c.
  32
  33         BusLogic=       [HW,SCSI]
  34                         See drivers/scsi/BusLogic.c, comment before function
  35                         BusLogic_ParseDriverOptions().
  36
  37         eata=           [HW,SCSI]
  38
  39         fdomain=        [HW,SCSI]
  40                         See header of drivers/scsi/fdomain.c.
  41
  42         gdth=           [HW,SCSI]
  43                         See header of drivers/scsi/gdth.c.
  44
  45         gvp11=          [HW,SCSI]
  46
  47         ips=            [HW,SCSI] Adaptec / IBM ServeRAID controller
  48                         See header of drivers/scsi/ips.c.
  49
  50         mac5380=        [HW,SCSI]
  51                         See drivers/scsi/mac_scsi.c.
  52
  53         max_luns=       [SCSI] Maximum number of LUNs to probe.
  54                         Should be between 1 and 2^32-1.
  55
  56         max_report_luns=
  57                         [SCSI] Maximum number of LUNs received.
  58                         Should be between 1 and 16384.
  59
  60         NCR_D700=       [HW,SCSI]
  61                         See header of drivers/scsi/NCR_D700.c.
  62
  63         ncr5380=        [HW,SCSI]
  64                         See Documentation/scsi/g_NCR5380.txt.
  65
  66         ncr53c400=      [HW,SCSI]
  67                         See Documentation/scsi/g_NCR5380.txt.
  68
  69         ncr53c400a=     [HW,SCSI]
  70                         See Documentation/scsi/g_NCR5380.txt.
  71
  72         ncr53c406a=     [HW,SCSI]
  73
  74         ncr53c8xx=      [HW,SCSI]
  75
  76         osst=           [HW,SCSI] SCSI Tape Driver
  77                         Format: <buffer_size>,<write_threshold>
  78                         See also Documentation/scsi/st.txt.
  79
  80         scsi_debug_*=   [SCSI]
  81                         See drivers/scsi/scsi_debug.c.
  82
  83         scsi_default_dev_flags=
  84                         [SCSI] SCSI default device flags
  85                         Format: <integer>
  86
  87         scsi_dev_flags= [SCSI] Black/white list entry for vendor and model
  88                         Format: <vendor>:<model>:<flags>
  89                         (flags are integer value)
  90
  91         scsi_logging_level=     [SCSI] a bit mask of logging levels
  92                         See drivers/scsi/scsi_logging.h for bits.  Also
  93                         settable via sysctl at dev.scsi.logging_level
  94                         (/proc/sys/dev/scsi/logging_level).
  95                         There is also a nice 'scsi_logging_level' script in the
  96                         S390-tools package, available for download at
  97                         http://www-128.ibm.com/developerworks/linux/linux390/s390-tools-1.5.4.html
  98
  99         scsi_mod.scan=  [SCSI] sync (default) scans SCSI busses as they are
 100                         discovered.  async scans them in kernel threads,
 101                         allowing boot to proceed.  none ignores them, expecting
 102                         user space to do the scan.
 103
 104         sim710=         [SCSI,HW]
 105                         See header of drivers/scsi/sim710.c.
 106
 107         st=             [HW,SCSI] SCSI tape parameters (buffers, etc.)
 108                         See Documentation/scsi/st.txt.
 109
 110         sym53c416=      [HW,SCSI]
 111                         See header of drivers/scsi/sym53c416.c.
 112
 113         tmscsim=        [HW,SCSI]
 114                         See comment before function dc390_setup() in
 115                         drivers/scsi/tmscsim.c.
 116
 117         wd33c93=        [HW,SCSI]
 118                         See header of drivers/scsi/wd33c93.c.