overlay/frameworks/base/core/res/res/values/config.xml

   1 <?xml version="1.0" encoding="utf-8"?>
   2 <!--
   3 /*
   4 ** Copyright 2013, The CyanogenMod Project
   5 ** Copyright 2018, The LineageOS Project
   6 **
   7 ** Licensed under the Apache License, Version 2.0 (the "License");
   8 ** you may not use this file except in compliance with the License.
   9 ** You may obtain a copy of the License at
  10 **
  11 **     http://www.apache.org/licenses/LICENSE-2.0
  12 **
  13 ** Unless required by applicable law or agreed to in writing, software
  14 ** distributed under the License is distributed on an "AS IS" BASIS,
  15 ** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  16 ** See the License for the specific language governing permissions and
  17 ** limitations under the License.
  18 */
  19 -->
  20
  21 <!-- These resources are around just to allow their values to be customized
  22      for different hardware and product builds. -->
  23 <resources>
  24
  25     <!-- This string array should be overridden by the device to present a list of radio
  26          attributes.  This is used by the connectivity manager to decide which networks can coexist
  27          based on the hardware -->
  28     <!-- An Array of "[ConnectivityManager connectionType],
  29                       [# simultaneous connection types]"  -->
  30     <string-array translatable="false" name="radioAttributes">
  31         <!-- DEFAULT -->
  32         <item>"1,1"</item>
  33         <!-- MOBILE -->
  34         <item>"0,1"</item>
  35         <!-- BLUETOOTH -->
  36         <item>"7,1"</item>
  37     </string-array>
  38
  39     <!-- Power Management: Specifies whether to decouple the interactive state of the
  40          device from the display on/off state. -->
  41     <bool name="config_powerDecoupleInteractiveModeFromDisplay">false</bool>
  42
  43     <!-- Screen brightness used to dim the screen while dozing in a very low power state.
  44          May be less than the minimum allowed brightness setting
  45          that can be set by the user. -->
  46     <integer name="config_screenBrightnessDoze">1</integer>
  47
  48         <!-- If true, the doze component is not started until after the screen has been
  49          turned off and the screen off animation has been performed. -->
  50     <bool name="config_dozeAfterScreenOffByDefault">true</bool>
  51
  52     <!-- ComponentName of a dream to show whenever the system would otherwise have
  53          gone to sleep.  When the PowerManager is asked to go to sleep, it will instead
  54          try to start this dream if possible.  The dream should typically call startDozing()
  55          to put the display into a low power state and allow the application processor
  56          to be suspended.  When the dream ends, the system will go to sleep as usual.
  57          Specify the component name or an empty string if none.
  58          Note that doze dreams are not subject to the same start conditions as ordinary dreams.
  59          Doze dreams will run whenever the power manager is in a dozing state. -->
  60     <string name="config_dozeComponent">com.android.systemui/com.android.systemui.doze.DozeService</string>
  61
  62     <!-- Boolean indicating if restoring network selection should be skipped -->
  63     <!-- The restoring is handled by modem if it is true -->
  64     <bool translatable="false" name="skip_restoring_network_selection">true</bool>
  65
  66     <!-- Indicate whether closing the lid causes the device to go to sleep and opening
  67          it causes the device to wake up.
  68          The default is false. -->
  69     <bool name="config_lidControlsSleep">true</bool>
  70
  71     <!-- Flag specifying whether VoLTE TTY is supported -->
  72     <bool name="config_carrier_volte_tty_supported">true</bool>
  73
  74     <!-- Configure mobile tcp buffer sizes in the form:
  75          rat-name:rmem_min,rmem_def,rmem_max,wmem_min,wmem_def,wmem_max
  76          If no value is found for the rat-name in use, the system default will be applied.
  77     -->
  78     <string-array name="config_mobile_tcp_buffers">
  79         <item>lte:1048576,3145728,4194304,1048576,3145728,4194304</item>
  80         <item>umts:4094,87380,1220608,4096,16384,1220608</item>
  81         <item>hspa:4094,87380,1220608,4096,16384,1220608</item>
  82         <item>hsupa:4094,87380,1220608,4096,16384,1220608</item>
  83         <item>hsdpa:4094,87380,1220608,4096,16384,1220608</item>
  84         <item>hspap:4094,87380,1220608,4096,16384,1220608</item>
  85     </string-array>
  86
  87     <!-- Configure wifi tcp buffersizes in the form:
  88          rmem_min,rmem_def,rmem_max,wmem_min,wmem_def,wmem_max -->
  89     <string name="config_wifi_tcp_buffers" translatable="false">524288,1048576,2097152,262144,524288,1048576</string>
  90
  91     <!-- Flag indicating which package name can access the persistent data partition -->
  92     <string name="config_persistentDataPackageName" translatable="false">com.google.android.gms</string>
  93
  94     <!-- This string array should be overridden by the device to present a list of network
  95          attributes.  This is used by the connectivity manager to decide which networks can coexist
  96          based on the hardware -->
  97     <!-- An Array of "[Connection name],[ConnectivityManager.TYPE_xxxx],
  98          [associated radio-type],[priority],[restoral-timer(ms)],[dependencyMet]  -->
  99     <!-- the 5th element "resore-time" indicates the number of milliseconds to delay
 100          before automatically restore the default connection.  Set -1 if the connection
 101          does not require auto-restore. -->
 102     <!-- the 6th element indicates boot-time dependency-met value. -->
 103     <string-array translatable="false" name="networkAttributes">
 104         <item>wifi,1,1,1,-1,true</item>
 105         <item>mobile,0,0,0,-1,true</item>
 106         <item>mobile_mms,2,0,2,240000,true</item>
 107         <item>mobile_supl,3,0,2,60000,true</item>
 108         <item>mobile_dun,4,0,2,60000,true</item>
 109         <item>mobile_hipri,5,0,3,60000,true</item>
 110         <item>bluetooth,7,7,0,-1,true</item>
 111         <item>ethernet,9,9,2,-1,true</item>
 112         <item>mobile_fota,10,0,2,60000,true</item>
 113         <item>mobile_ims,11,0,1,-1,true</item>
 114         <item>mobile_cbs,12,0,2,60000,true</item>
 115         <item>wifi_p2p,13,1,0,-1,true</item>
 116         <item>mobile_ia,14,0,2,-1,true</item>
 117         <item>mobile_emergency,15,0,2,-1,true</item>
 118         <item>mobile_bip,23,0,2,60000,true</item>
 119         <item>mobile_cas,24,0,3,60000,true</item>
 120         <item>mobile_xcap,27,0,2,60000,true</item>
 121         <item>mobile_ent1,28,0,2,-1,true</item>
 122     </string-array>
 123
 124     <!-- Flag indicating whether we should enable the automatic brightness in Settings.
 125          Software implementation will be used if config_hardware_auto_brightness_available is not set -->
 126     <bool name="config_automatic_brightness_available">true</bool>
 127
 128     <!-- The default iface on which to monitor data use -->
 129     <string name="config_datause_iface" translatable="false">rmnet0</string>
 130
 131     <!-- Stability requirements in milliseconds for accepting a new brightness level.  This is used
 132          for debouncing the light sensor.  Different constants are used to debounce the light sensor
 133          when adapting to brighter or darker environments.  This parameter controls how quickly
 134          brightness changes occur in response to an observed change in light level that exceeds the
 135          hysteresis threshold. -->
 136     <integer name="config_autoBrightnessBrighteningLightDebounce">2000</integer>
 137     <integer name="config_autoBrightnessDarkeningLightDebounce">4000</integer>
 138
 139     <!-- Array of light sensor LUX values to define our levels for auto backlight brightness support.
 140          The N entries of this array define N  1 zones as follows:
 141          Zone 0:        0 <= LUX < array[0]
 142          Zone 1:        array[0] <= LUX < array[1]
 143          ...
 144          Zone N:        array[N - 1] <= LUX < array[N]
 145          Zone N + 1     array[N] <= LUX < infinity
 146          Must be overridden in platform specific overlays -->
 147     <integer-array name="config_autoBrightnessLevels">
 148         <item>9</item>
 149         <item>30</item>
 150         <item>100</item>
 151         <item>325</item>
 152         <item>1250</item>
 153         <item>3500</item>
 154         <item>10000</item>
 155         <item>20000</item>
 156     </integer-array>
 157
 158     <!-- Array of output values for LCD backlight corresponding to the LUX values
 159          in the config_autoBrightnessLevels array.  This array should have size one greater
 160          than the size of the config_autoBrightnessLevels array.
 161          This must be overridden in platform specific overlays -->
 162     <integer-array name="config_autoBrightnessLcdBacklightValues">
 163         <!--     9 --> <item>18</item>
 164         <!--    30 --> <item>30</item>
 165         <!--   100 --> <item>59</item>
 166         <!--   325 --> <item>74</item>
 167         <!--  1250 --> <item>92</item>
 168         <!--  3500 --> <item>118</item>
 169         <!-- 10000 --> <item>155</item>
 170         <!-- 20000 --> <item>222</item>
 171                        <item>255</item>
 172     </integer-array>
 173
 174     <!-- Minimum screen brightness setting allowed by the power manager.
 175          The user is forbidden from setting the brightness below this level. -->
 176     <integer name="config_screenBrightnessSettingMinimum">0</integer>
 177
 178     <!-- Default screen brightness setting.
 179          Must be in the range specified by minimum and maximum. -->
 180     <integer name="config_screenBrightnessSettingDefault">134</integer>
 181
 182     <!-- Screen brightness used to dim the screen when the user activity
 183          timeout expires.  May be less than the minimum allowed brightness setting
 184          that can be set by the user. -->
 185     <integer name="config_screenBrightnessDim">19</integer>
 186
 187     <!-- Control the behavior when the user long presses the home button.
 188             0 - Nothing
 189             1 - Menu key
 190             2 - Recent apps view in SystemUI
 191             3 - Launch assist intent
 192             4 - Voice Search
 193             5 - In-app Search
 194          This needs to match the constants in
 195          policy/src/com/android/internal/policy/impl/PhoneWindowManager.java
 196     -->
 197     <integer name="config_longPressOnHomeBehavior">3</integer>
 198
 199     <!-- Control the behavior when the user double-taps the home button.
 200             0 - Nothing
 201             1 - Menu
 202             2 - Recent apps view in SystemUI
 203             3 - Launch assist intent
 204             4 - Voice Search
 205             5 - In-app Search
 206          This needs to match the constants in
 207          policy/src/com/android/internal/policy/impl/PhoneWindowManager.java
 208     -->
 209     <integer name="config_doubleTapOnHomeBehavior">2</integer>
 210
 211     <!-- These resources are around just to allow their values to be customized
 212      for different hardware and product builds. -->
 213     <string name="config_radio_access_family">GSM | WCDMA | LTE</string>
 214
 215      <!-- Values for GPS configuration -->
 216      <string-array translatable="false" name="config_gpsParameters">
 217         <item>XTRA_SERVER_1=https://glltos1.glpals.com/4day/v3/latest/lto2.dat</item>
 218         <item>XTRA_SERVER_2=https://glltos2.glpals.com/4day/v3/latest/lto2.dat</item>
 219      </string-array>
 220
 221     <!-- Boolean indicating whether the wifi chipset has dual frequency band support -->
 222     <bool translatable="false" name="config_wifi_dual_band_support">false</bool>
 223
 224     <!-- Boolean indicating whether the wifi chipset has background scan support -->
 225     <bool translatable="false" name="config_wifi_background_scan_support">true</bool>
 226
 227     <!-- Wifi driver supports batched scan -->
 228     <bool translatable="false" name="config_wifi_batched_scan_supported">false</bool>
 229
 230     <!-- Indicate whether the SD card is accessible without removing the battery. -->
 231     <bool name="config_batterySdCardAccessibility">true</bool>
 232
 233     <!-- Display low battery warning when battery level dips to this value.
 234          Also, the battery stats are flushed to disk when we hit this level.  -->
 235     <integer name="config_criticalBatteryWarningLevel">10</integer>
 236
 237     <!-- Display low battery warning when battery level dips to this value -->
 238     <integer name="config_lowBatteryWarningLevel">20</integer>
 239
 240     <!-- Shutdown if the battery temperature exceeds (this value * 0.1) Celsius. -->
 241     <integer name="config_shutdownBatteryTemperature">600</integer>
 242
 243     <!-- Minimum allowable screen brightness to use in a very dark room.
 244          This value sets the floor for the darkest possible auto-brightness
 245          adjustment.  It is expected to be somewhat less than the first entry in
 246          config_autoBrightnessLcdBacklightValues so as to allow the user to have
 247          some range of adjustment to dim the screen further than usual in very
 248          dark rooms. The contents of the screen must still be clearly visible
 249          in darkness (although they may not be visible in a bright room). -->
 250     <integer name="config_screenBrightnessDark">1</integer>
 251
 252     <!-- Slow brightness animation ramp rate in brightness units per second-->
 253     <integer translatable="false" name="config_brightness_ramp_rate_slow">80</integer>
 254
 255     <!-- Light sensor event rate in milliseconds for automatic brightness control. -->
 256     <integer name="config_autoBrightnessLightSensorRate">250</integer>
 257
 258     <!-- Initial light sensor event rate in milliseconds for automatic brightness control. This is
 259          used for obtaining the first light sample when the device stops dozing.
 260          Set this to 0 to disable this feature. -->
 261     <integer name="config_autoBrightnessInitialLightSensorRate">250</integer>
 262
 263     <!-- Period of time in which to consider light samples in milliseconds. -->
 264     <integer name="config_autoBrightnessAmbientLightHorizon">5000</integer>
 265
 266     <!-- Amount of time it takes for the light sensor to warm up in milliseconds.
 267          For this time after the screen turns on, the Power Manager
 268          will not debounce light sensor readings -->
 269     <integer name="config_lightSensorWarmupTime">0</integer>
 270
 271     <!-- Allow automatic adjusting of the screen brightness while dozing in low power state. -->
 272     <bool name="config_allowAutoBrightnessWhileDozing">true</bool>
 273
 274     <!-- If we allow automatic adjustment of screen brightness while dozing, how many times we want
 275          to reduce it to preserve the battery. Value of 100% means no scaling. -->
 276     <fraction name="config_screenAutoBrightnessDozeScaleFactor">50%</fraction>
 277
 278     <!-- Enable OLED burn-in protection -->
 279     <bool name="config_enableBurnInProtection">true</bool>
 280
 281     <!-- Boolean indicating if current platform supports BLE peripheral mode -->
 282     <bool name="config_bluetooth_le_peripheral_mode_supported">true</bool>
 283
 284     <!-- reference volume index for music stream to limit headphone volume and display warning -->
 285     <integer name="config_safe_media_volume_index">10</integer>
 286
 287     <!-- Whether WiFi display is supported by this device.
 288          There are many prerequisites for this feature to work correctly.
 289          Here are a few of them:
 290          * The WiFi radio must support WiFi P2P.
 291          * The WiFi radio must support concurrent connections to the WiFi display and
 292            to an access point.
 293          * The Audio Flinger audio_policy.conf file must specify a rule for the "r_submix"
 294            remote submix module.  This module is used to record and stream system
 295            audio output to the WiFi display encoder in the media server.
 296          * The remote submix module "audio.r_submix.default" must be installed on the device.
 297          * The device must be provisioned with HDCP keys (for protected content).
 298     -->
 299     <bool name="config_enableWifiDisplay">true</bool>
 300
 301     <!-- Whether to post reset runnable for all clients. Needed for some older
 302         vendor fingerprint HAL implementations. -->
 303     <bool name="config_fingerprintPostResetRunnableForAllClients">true</bool>
 304 </resources>