cifs: fix use-after-free bug in find_writable_file

commit e1e9bda22d7ddf88515e8fe401887e313922823e upstream.

Under intermittent network outages, find_writable_file() is susceptible
to the following race condition, which results in a user-after-free in
the cifs_writepages code-path:

Thread 1                                        Thread 2
========                                        ========

inv_file = NULL
refind = 0
spin_lock(&cifs_file_list_lock)

// invalidHandle found on openFileList

inv_file = open_file
// inv_file->count currently 1

cifsFileInfo_get(inv_file)
// inv_file->count = 2

spin_unlock(&cifs_file_list_lock);

cifs_reopen_file()                            cifs_close()
// fails (rc != 0)                            ->cifsFileInfo_put()
                                       spin_lock(&cifs_file_list_lock)
                                       // inv_file->count = 1
                                       spin_unlock(&cifs_file_list_lock)

spin_lock(&cifs_file_list_lock);
list_move_tail(&inv_file->flist,
      &cifs_inode->openFileList);
spin_unlock(&cifs_file_list_lock);

cifsFileInfo_put(inv_file);
->spin_lock(&cifs_file_list_lock)

  // inv_file->count = 0
  list_del(&cifs_file->flist);
  // cleanup!!
  kfree(cifs_file);

  spin_unlock(&cifs_file_list_lock);

spin_lock(&cifs_file_list_lock);
++refind;
// refind = 1
goto refind_writable;

At this point we loop back through with an invalid inv_file pointer
and a refind value of 1. On second pass, inv_file is not overwritten on
openFileList traversal, and is subsequently dereferenced.

Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Jeff Layton <jlayton@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: xhci: apply XHCI_AVOID_BEI quirk to all Intel xHCI controllers

commit 227a4fd801c8a9fa2c4700ab98ec1aec06e3b44d upstream.

When a device with an isochronous endpoint is plugged into the Intel
xHCI host controller, and the driver submits multiple frames per URB,
the xHCI driver will set the Block Event Interrupt (BEI) flag on all
but the last TD for the URB. This causes the host controller to place
an event on the event ring, but not send an interrupt. When the last
TD for the URB completes, BEI is cleared, and we get an interrupt for
the whole URB.

However, under Intel xHCI host controllers, if the event ring is full
of events from transfers with BEI set,  an "Event Ring is Full" event
will be posted to the last entry of the event ring,  but no interrupt
is generated. Host will cease all transfer and command executions and
wait until software completes handling the pending events in the event
ring.  That means xHC stops, but event of "event ring is full" is not
notified. As the result, the xHC looks like dead to user.

This patch is to apply XHCI_AVOID_BEI quirk to Intel xHC devices. And
it should be backported to kernels as old as 3.0, that contains the
commit 69e848c2090a ("Intel xhci: Support EHCI/xHCI port switching.").

Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Alistair Grant <akgrant0710@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpuidle: ACPI: do not overwrite name and description of C0

commit c7e8bdf5872c5a8f5a6494e16fe839c38a0d3d3d upstream.

Fix a bug that leads to showing the name and description of C-state C0
as "<null>" in sysfs after the ACPI C-states changed (e.g. after AC->DC
or DC->AC
transition).

The function poll_idle_init() in drivers/cpuidle/driver.c initializes the
state 0 during cpuidle_register_driver(), so we better do not overwrite it
again with '\0' during acpi_processor_cst_has_changed().

Signed-off-by: Thomas Schlichter <thomas.schlichter@web.de>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dmaengine: omap-dma: Fix memory leak when terminating running transfer

commit 02d88b735f5a60f04dbf6d051b76e1877a0d0844 upstream.

In omap_dma_start_desc the vdesc->node is removed from the virt-dma
framework managed lists (to be precise from the desc_issued list).
If a terminate_all comes before the transfer finishes the omap_desc will
not be freed up because it is not in any of the lists and we stopped the
DMA channel so the transfer will not going to complete.
There is no special sequence for leaking memory when using cyclic (audio)
transfer: with every start and stop of a cyclic transfer the driver leaks
struct omap_desc worth of memory.

Free up the allocated memory directly in omap_dma_terminate_all() since the
framework will not going to do that for us.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
CC: <linux-omap@vger.kernel.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: imu: Use iio_trigger_get for indio_dev->trig assignment

commit 4ce7ca89d6e8eae9e201cd0e972ba323f33e2fb4 upstream.

This patch uses iio_trigger_get to increment the reference
count of trigger device, to avoid incorrect assignment.
Can result in a null pointer dereference during removal if the
trigger has been changed before removal.

This patch refers to a similar situation encountered through the
following discussion:
http://www.spinics.net/lists/linux-iio/msg13669.html

Signed-off-by: Darshana Padmadas <darshanapadmadas@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: inv_mpu6050: Clear timestamps fifo while resetting hardware fifo

commit 4dac0a8eefd55bb1f157d1a5a084531334a2d74c upstream.

A hardware fifo reset always imply an invalidation of the
existing timestamps, so we'll clear timestamps fifo on
successfull hardware fifo reset.

Signed-off-by: Viorel Suman <viorel.suman@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Defer processing of REQ_PREEMPT requests for blocked devices

commit bba0bdd7ad4713d82338bcd9b72d57e9335a664b upstream.

SCSI transport drivers and SCSI LLDs block a SCSI device if the
transport layer is not operational. This means that in this state
no requests should be processed, even if the REQ_PREEMPT flag has
been set. This patch avoids that a rescan shortly after a cable
pull sporadically triggers the following kernel oops:

BUG: unable to handle kernel paging request at ffffc9001a6bc084
IP: [<ffffffffa04e08f2>] mlx4_ib_post_send+0xd2/0xb30 [mlx4_ib]
Process rescan-scsi-bus (pid: 9241, threadinfo ffff88053484a000, task ffff880534aae100)
Call Trace:
 [<ffffffffa0718135>] srp_post_send+0x65/0x70 [ib_srp]
 [<ffffffffa071b9df>] srp_queuecommand+0x1cf/0x3e0 [ib_srp]
 [<ffffffffa0001ff1>] scsi_dispatch_cmd+0x101/0x280 [scsi_mod]
 [<ffffffffa0009ad1>] scsi_request_fn+0x411/0x4d0 [scsi_mod]
 [<ffffffff81223b37>] __blk_run_queue+0x27/0x30
 [<ffffffff8122a8d2>] blk_execute_rq_nowait+0x82/0x110
 [<ffffffff8122a9c2>] blk_execute_rq+0x62/0xf0
 [<ffffffffa000b0e8>] scsi_execute+0xe8/0x190 [scsi_mod]
 [<ffffffffa000b2f3>] scsi_execute_req+0xa3/0x130 [scsi_mod]
 [<ffffffffa000c1aa>] scsi_probe_lun+0x17a/0x450 [scsi_mod]
 [<ffffffffa000ce86>] scsi_probe_and_add_lun+0x156/0x480 [scsi_mod]
 [<ffffffffa000dc2f>] __scsi_scan_target+0xdf/0x1f0 [scsi_mod]
 [<ffffffffa000dfa3>] scsi_scan_host_selected+0x183/0x1c0 [scsi_mod]
 [<ffffffffa000edfb>] scsi_scan+0xdb/0xe0 [scsi_mod]
 [<ffffffffa000ee13>] store_scan+0x13/0x20 [scsi_mod]
 [<ffffffff811c8d9b>] sysfs_write_file+0xcb/0x160
 [<ffffffff811589de>] vfs_write+0xce/0x140
 [<ffffffff81158b53>] sys_write+0x53/0xa0
 [<ffffffff81464592>] system_call_fastpath+0x16/0x1b
 [<00007f611c9d9300>] 0x7f611c9d92ff

Reported-by: Max Gurtuvoy <maxg@mellanox.com>
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: ftdi_sio: Use jtag quirk for SNAP Connect E10

commit b229a0f840f774d29d8fedbf5deb344ca36b7f1a upstream.

This patch uses the existing CALAO Systems ftdi_8u2232c_probe in order
to avoid attaching a TTY to the JTAG port as this board is based on the
CALAO Systems reference design and needs the same fix up.

Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
[johan: clean up probe logic ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: ftdi_sio: Added custom PID for Synapse Wireless product

commit 4899c054a90439477b24da8977db8d738376fe90 upstream.

Synapse Wireless uses the FTDI VID with a custom PID of 0x9090 for their
SNAP Stick 200 product.

Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

radeon: Do not directly dereference pointers to BIOS area.

commit f2c9e560b406f2f6b14b345c7da33467dee9cdf2 upstream.

Use readb() and memcpy_fromio() accessors instead.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

writeback: fix possible underflow in write bandwidth calculation

commit c72efb658f7c8b27ca3d0efb5cfd5ded9fcac89e upstream.

From 1ebf33901ecc75d9496862dceb1ef0377980587c Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Mon, 23 Mar 2015 00:08:19 -0400

2f800fbd777b ("writeback: fix dirtied pages accounting on redirty")
introduced account_page_redirty() which reverts stat updates for a
redirtied page, making BDI_DIRTIED no longer monotonically increasing.

bdi_update_write_bandwidth() uses the delta in BDI_DIRTIED as the
basis for bandwidth calculation.  While unlikely, since the above
patch, the newer value may be lower than the recorded past value and
underflow the bandwidth calculation leading to a wild result.

Fix it by subtracing min of the old and new values when calculating
delta.  AFAIK, there hasn't been any report of it happening but the
resulting erratic behavior would be non-critical and temporary, so
it's possible that the issue is happening without being reported.  The
risk of the fix is very low, so tagged for -stable.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Greg Thelen <gthelen@google.com>
Fixes: 2f800fbd777b ("writeback: fix dirtied pages accounting on redirty")
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

writeback: add missing INITIAL_JIFFIES init in global_update_bandwidth()

commit 7d70e15480c0450d2bfafaad338a32e884fc215e upstream.

global_update_bandwidth() uses static variable update_time as the
timestamp for the last update but forgets to initialize it to
INITIALIZE_JIFFIES.

This means that global_dirty_limit will be 5 mins into the future on
32bit and some large amount jiffies into the past on 64bit.  This
isn't critical as the only effect is that global_dirty_limit won't be
updated for the first 5 mins after booting on 32bit machines,
especially given the auxiliary nature of global_dirty_limit's role -
protecting against global dirty threshold's sudden dips; however, it
does lead to unintended suboptimal behavior.  Fix it.

Fixes: c42843f2f0bb ("writeback: introduce smoothed global dirty limit")
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Jan Kara <jack@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/memory hotplug: postpone the reset of obsolete pgdat

commit b0dc3a342af36f95a68fe229b8f0f73552c5ca08 upstream.

Qiu Xishi reported the following BUG when testing hot-add/hot-remove node under
stress condition:

  BUG: unable to handle kernel paging request at 0000000000025f60
  IP: next_online_pgdat+0x1/0x50
  PGD 0
  Oops: 0000 [#1] SMP
  ACPI: Device does not support D3cold
  Modules linked in: fuse nls_iso8859_1 nls_cp437 vfat fat loop dm_mod coretemp mperf crc32c_intel ghash_clmulni_intel aesni_intel ablk_helper cryptd lrw gf128mul glue_helper aes_x86_64 pcspkr microcode igb dca i2c_algo_bit ipv6 megaraid_sas iTCO_wdt i2c_i801 i2c_core iTCO_vendor_support tg3 sg hwmon ptp lpc_ich pps_core mfd_core acpi_pad rtc_cmos button ext3 jbd mbcache sd_mod crc_t10dif scsi_dh_alua scsi_dh_rdac scsi_dh_hp_sw scsi_dh_emc scsi_dh ahci libahci libata scsi_mod [last unloaded: rasf]
  CPU: 23 PID: 238 Comm: kworker/23:1 Tainted: G           O 3.10.15-5885-euler0302 #1
  Hardware name: HUAWEI TECHNOLOGIES CO.,LTD. Huawei N1/Huawei N1, BIOS V100R001 03/02/2015
  Workqueue: events vmstat_update
  task: ffffa800d32c0000 ti: ffffa800d32ae000 task.ti: ffffa800d32ae000
  RIP: 0010: next_online_pgdat+0x1/0x50
  RSP: 0018:ffffa800d32afce8  EFLAGS: 00010286
  RAX: 0000000000001440 RBX: ffffffff81da53b8 RCX: 0000000000000082
  RDX: 0000000000000000 RSI: 0000000000000082 RDI: 0000000000000000
  RBP: ffffa800d32afd28 R08: ffffffff81c93bfc R09: ffffffff81cbdc96
  R10: 00000000000040ec R11: 00000000000000a0 R12: ffffa800fffb3440
  R13: ffffa800d32afd38 R14: 0000000000000017 R15: ffffa800e6616800
  FS:  0000000000000000(0000) GS:ffffa800e6600000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000025f60 CR3: 0000000001a0b000 CR4: 00000000001407e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
    refresh_cpu_vm_stats+0xd0/0x140
    vmstat_update+0x11/0x50
    process_one_work+0x194/0x3d0
    worker_thread+0x12b/0x410
    kthread+0xc6/0xd0
    ret_from_fork+0x7c/0xb0

The cause is the "memset(pgdat, 0, sizeof(*pgdat))" at the end of
try_offline_node, which will reset all the content of pgdat to 0, as the
pgdat is accessed lock-free, so that the users still using the pgdat
will panic, such as the vmstat_update routine.

process A: offline node XX:

vmstat_updat()
   refresh_cpu_vm_stats()
     for_each_populated_zone()
       find online node XX
     cond_resched()
offline cpu and memory, then try_offline_node()
node_set_offline(nid), and memset(pgdat, 0, sizeof(*pgdat))
       zone = next_zone(zone)
         pg_data_t *pgdat = zone->zone_pgdat;  // here pgdat is NULL now
           next_online_pgdat(pgdat)
             next_online_node(pgdat->node_id);  // NULL pointer access

So the solution here is postponing the reset of obsolete pgdat from
try_offline_node() to hotadd_new_pgdat(), and just resetting
pgdat->nr_zones and pgdat->classzone_idx to be 0 rather than the memset
0 to avoid breaking pointer information in pgdat.

Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Reported-by: Xishi Qiu <qiuxishi@huawei.com>
Suggested-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Taku Izumi <izumi.taku@jp.fujitsu.com>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Xie XiuQi <xiexiuqi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nbd: fix possible memory leak

commit ff6b8090e26ef7649ef0cc6b42389141ef48b0cf upstream.

we have already allocated memory for nbd_dev, but we were not
releasing that memory and just returning the error value.

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Acked-by: Paul Clements <Paul.Clements@SteelEye.com>
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: dvm: run INIT firmware again upon .start()

commit 9c8928f5176766bec79f272bd47b7124e11cccbd upstream.

The assumption before this patch was that we don't need to
run again the INIT firmware after the system booted. The
INIT firmware runs calibrations which impact the physical
layer's behavior.
Users reported that it may be helpful to run these
calibrations again every time the interface is brought up.
The penatly is minimal, since the calibrations run fast.
This fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=94341

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/uverbs: Prevent integer overflow in ib_umem_get address arithmetic

commit 8494057ab5e40df590ef6ef7d66324d3ae33356b upstream.

Properly verify that the resulting page aligned end address is larger
than both the start address and the length of the memory area requested.

Both the start and length arguments for ib_umem_get are controlled by
the user. A misbehaving user can provide values which will cause an
integer overflow when calculating the page aligned end address.

This overflow can cause also miscalculation of the number of pages
mapped, and additional logic issues.

Addresses: CVE-2014-8159
Signed-off-by: Shachar Raindel <raindel@mellanox.com>
Signed-off-by: Jack Morgenstein <jackm@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/core: Avoid leakage from kernel to user space

commit 377b513485fd885dea1083a9a5430df65b35e048 upstream.

Clear the reserved field of struct ib_uverbs_async_event_desc which is
copied to user space.

Signed-off-by: Eli Cohen <eli@mellanox.com>
Reviewed-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: Fix crash in TCP Fast Open

Commit 355a901e6cf1 ("tcp: make connect() mem charging friendly")
changed tcp_send_syn_data() to perform an open-coded copy of the 'syn'
skb rather than using skb_copy_expand().

The open-coded copy does not cover the skb_shared_info::gso_segs
field, so in the new skb it is left set to 0.  When this commit was
backported into stable branches between 3.10.y and 3.16.7-ckty
inclusive, it triggered the BUG() in tcp_transmit_skb().

Since Linux 3.18 the GSO segment count is kept in the
tcp_skb_cb::tcp_gso_segs field and tcp_send_syn_data() does copy the
tcp_skb_cb structure to the new skb, so mainline and newer stable
branches are not affected.

Set skb_shared_info::gso_segs to the correct value of 1.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selinux: fix sel_write_enforce broken return value

commit 6436a123a147db51a0b06024a8350f4c230e73ff upstream.

Return a negative error value like the rest of the entries in this function.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
[PM: tweaked subject line]
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Fix headphone pin config for Lifebook T731

commit cc7016ab1a22fb26f388c2fb2b692b89897cbc3e upstream.

Some BIOS version of Fujitsu Lifebook T731 seems to set up the
headphone pin (0x21) without the assoc number 0x0f while it's set only
to the output on the docking port (0x1a).  With the recent commit
[03ad6a8c93b6: ALSA: hda - Fix "PCM" name being used on one DAC when
 there are two DACs], this resulted in the weird mixer element
mapping where the headphone on the laptop is assigned as a shared
volume with the speaker and the docking port is assigned as an
individual headphone.

This patch improves the situation by correcting the headphone pin
config to the more appropriate value.

Reported-and-tested-by: Taylor Smock <smocktaylor@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb - Creative USB X-Fi Pro SB1095 volume knob support

commit 3dc8523fa7412e731441c01fb33f003eb3cfece1 upstream.

Adds an entry for Creative USB X-Fi to the rc_config array in
mixer_quirks.c to allow use of volume knob on the device.
Adds support for newer X-Fi Pro card, known as "Model No. SB1095"
with USB ID "041e:3237"

Signed-off-by: Dmitry M. Fedin <dmitry.fedin@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Add one more node in the EAPD supporting candidate list

commit af95b41426e0b58279f8ff0ebe420df49a4e96b8 upstream.

We have a HP machine which use the codec node 0x17 connecting the
internal speaker, and from the node capability, we saw the EAPD,
if we don't set the EAPD on for this node, the internal speaker
can't output any sound.

BugLink: https://bugs.launchpad.net/bugs/1436745
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 3.10.74

net: ethernet: pcnet32: Setup the SRAM and NOUFLO on Am79C97{3, 5}

commit 87f966d97b89774162df04d2106c6350c8fe4cb3 upstream.

On a MIPS Malta board, tons of fifo underflow errors have been observed
when using u-boot as bootloader instead of YAMON. The reason for that
is that YAMON used to set the pcnet device to SRAM mode but u-boot does
not. As a result, the default Tx threshold (64 bytes) is now too small to
keep the fifo relatively used and it can result to Tx fifo underflow errors.
As a result of which, it's best to setup the SRAM on supported controllers
so we can always use the NOUFLO bit.

Cc: <netdev@vger.kernel.org>
Cc: <linux-kernel@vger.kernel.org>
Cc: Don Fry <pcnet32@frontier.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/mpc85xx: Add ranges to etsec2 nodes

commit bb344ca5b90df62b1a3b7a35c6a9d00b306a170d upstream.

Commit 746c9e9f92dd "of/base: Fix PowerPC address parsing hack" limited
the applicability of the workaround whereby a missing ranges is treated
as an empty ranges.  This workaround was hiding a bug in the etsec2
device tree nodes, which have children with reg, but did not have
ranges.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Reported-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hfsplus: fix B-tree corruption after insertion at position 0

commit 98cf21c61a7f5419d82f847c4d77bf6e96a76f5f upstream.

Fix B-tree corruption when a new record is inserted at position 0 in the
node in hfs_brec_insert().  In this case a hfs_brec_update_parent() is
called to update the parent index node (if exists) and it is passed
hfs_find_data with a search_key containing a newly inserted key instead
of the key to be updated.  This results in an inconsistent index node.
The bug reproduces on my machine after an extents overflow record for
the catalog file (CNID=4) is inserted into the extents overflow B-tree.
Because of a low (reserved) value of CNID=4, it has to become the first
record in the first leaf node.

The resulting first leaf node is correct:

  ----------------------------------------------------
  | key0.CNID=4 | key1.CNID=123 | key2.CNID=456, ... |
  ----------------------------------------------------

But the parent index key0 still contains the previous key CNID=123:

  -----------------------
  | key0.CNID=123 | ... |
  -----------------------

A change in hfs_brec_insert() makes hfs_brec_update_parent() work
correctly by preventing it from getting fd->record=-1 value from
__hfs_brec_find().

Along the way, I removed duplicate code with unification of the if
condition.  The resulting code is equivalent to the original code
because node is never 0.

Also hfs_brec_update_parent() will now return an error after getting a
negative fd->record value.  However, the return value of
hfs_brec_update_parent() is not checked anywhere in the file and I'm
leaving it unchanged by this patch.  brec.c lacks error checking after
some other calls too, but this issue is of less importance than the one
being fixed by this patch.

Signed-off-by: Sergei Antonov <saproj@gmail.com>
Cc: Joe Perches <joe@perches.com>
Reviewed-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Acked-by: Hin-Tak Leung <htl10@users.sourceforge.net>
Cc: Anton Altaparmakov <aia21@cam.ac.uk>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm: hold suspend_lock while suspending device during device deletion

commit ab7c7bb6f4ab95dbca96fcfc4463cd69843e3e24 upstream.

__dm_destroy() must take the suspend_lock so that its presuspend and
postsuspend calls do not race with an internal suspend.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vt6655: RFbSetPower fix missing rate RATE_12M

commit 40c8790bcb7ac74f3038153cd09310e220c6a1df upstream.

When the driver sets this rate a power of zero value is set causing
data flow stoppage until another rate is tried.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf: Fix irq_work 'tail' recursion

commit d525211f9d1be8b523ec7633f080f2116f5ea536 upstream.

Vince reported a watchdog lockup like:

[<ffffffff8115e114>] perf_tp_event+0xc4/0x210
[<ffffffff810b4f8a>] perf_trace_lock+0x12a/0x160
[<ffffffff810b7f10>] lock_release+0x130/0x260
[<ffffffff816c7474>] _raw_spin_unlock_irqrestore+0x24/0x40
[<ffffffff8107bb4d>] do_send_sig_info+0x5d/0x80
[<ffffffff811f69df>] send_sigio_to_task+0x12f/0x1a0
[<ffffffff811f71ce>] send_sigio+0xae/0x100
[<ffffffff811f72b7>] kill_fasync+0x97/0xf0
[<ffffffff8115d0b4>] perf_event_wakeup+0xd4/0xf0
[<ffffffff8115d103>] perf_pending_event+0x33/0x60
[<ffffffff8114e3fc>] irq_work_run_list+0x4c/0x80
[<ffffffff8114e448>] irq_work_run+0x18/0x40
[<ffffffff810196af>] smp_trace_irq_work_interrupt+0x3f/0xc0
[<ffffffff816c99bd>] trace_irq_work_interrupt+0x6d/0x80

Which is caused by an irq_work generating new irq_work and therefore
not allowing forward progress.

This happens because processing the perf irq_work triggers another
perf event (tracepoint stuff) which in turn generates an irq_work ad
infinitum.

Avoid this by raising the recursion counter in the irq_work -- which
effectively disables all software events (including tracepoints) from
actually triggering again.

Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Tested-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20150219170311.GH21418@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "iwlwifi: mvm: fix failure path when power_update fails in add_interface"

This reverts commit fce2d025479af5e1fa6717480c7853cdfb8b71aa

It was incorrectly applied, as it merged with fuzz.

Reported-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

mac80211: drop unencrypted frames in mesh fwding

commit d0c22119f574b851e63360c6b8660fe9593bbc3c upstream.

The mesh forwarding path was not checking that data
frames were protected when running an encrypted network;
add the necessary check.

Reported-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: disable u-APSD queues by default

commit aa75ebc275b2a91b193654a177daf900ad6703f0 upstream.

Some APs experience problems when working with
U-APSD. Decreasing the probability of that
happening by using legacy mode for all ACs but VO
isn't enough.

Cisco 4410N originally forced us to enable VO by
default only because it treated non-VO ACs as
legacy.

However some APs (notably Netgear R7000) silently
reclassify packets to different ACs. Since u-APSD
ACs require trigger frames for frame retrieval
clients would never see some frames (e.g. ARP
responses) or would fetch them accidentally after
a long time.

It makes little sense to enable u-APSD queues by
default because it needs userspace applications to
be aware of it to actually take advantage of the
possible additional powersavings. Implicitly
depending on driver autotrigger frame support
doesn't make much sense.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nl80211: ignore HT/VHT capabilities without QoS/WMM

commit 496fcc294daab18799e190c0264863d653588d1f upstream.

As HT/VHT depend heavily on QoS/WMM, it's not a good idea to
let userspace add clients that have HT/VHT but not QoS/WMM.
Since it does so in certain cases we've observed (client is
using HT IEs but not QoS/WMM) just ignore the HT/VHT info at
this point and don't pass it down to the drivers which might
unconditionally use it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcm_qla2xxx: Fix incorrect use of __transport_register_session

commit 75c3d0bf9caebb502e96683b2bc37f9692437e68 upstream.

This patch fixes the incorrect use of __transport_register_session()
in tcm_qla2xxx_check_initiator_node_acl() code, that does not perform
explicit se_tpg->session_lock when accessing se_tpg->tpg_sess_list
to add new se_sess nodes.

Given that tcm_qla2xxx_check_initiator_node_acl() is not called with
qla_hw->hardware_lock held for all accesses of ->tpg_sess_list, the
code should be using transport_register_session() instead.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Giridhar Malavali <giridhar.malavali@qlogic.com>
Cc: Quinn Tran <quinn.tran@qlogic.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcm_fc: missing curly braces in ft_invl_hw_context()

commit d556546e7ecd9fca199df4698943024d40044f8e upstream.

This patch adds a missing set of conditional check braces in
ft_invl_hw_context() originally introduced by commit dcd998ccd
when handling DDP failures in ft_recv_write_data() code.

 commit dcd998ccdbf74a7d8fe0f0a44e85da1ed5975946
 Author: Kiran Patil <kiran.patil@intel.com>
 Date:   Wed Aug 3 09:20:01 2011 +0000

    tcm_fc: Handle DDP/SW fc_frame_payload_get failures in ft_recv_write_data

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Kiran Patil <kiran.patil@intel.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: wm8955: Fix wrong value references for boolean kctl

commit 07892b10356f17717abdc578acbef72db86c880e upstream.

The correct values referred by a boolean control are
value.integer.value[], not value.enumerated.item[].
The former is long while the latter is int, so it's even incompatible
on 64bit architectures.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: adav80x: Fix wrong value references for boolean kctl

commit 2bf4c1d483d911cda5dd385527194d23e5cea73d upstream.

The correct values referred by a boolean control are
value.integer.value[], not value.enumerated.item[].
The former is long while the latter is int, so it's even incompatible
on 64bit architectures.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: ak4641: Fix wrong value references for boolean kctl

commit 08641d9b7bf915144a57a736b42642e13eb1167f upstream.

The correct values referred by a boolean control are
value.integer.value[], not value.enumerated.item[].
The former is long while the latter is int, so it's even incompatible
on 64bit architectures.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: wm8904: Fix wrong value references for boolean kctl

commit eaddf6fd959074f6a6e71deffe079c71eef35da6 upstream.

The correct values referred by a boolean control are
value.integer.value[], not value.enumerated.item[].
The former is long while the latter is int, so it's even incompatible
on 64bit architectures.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: wm8903: Fix wrong value references for boolean kctl

commit 24cc883c1fd16df34211ae41624aa6d3cd906693 upstream.

The correct values referred by a boolean control are
value.integer.value[], not value.enumerated.item[].
The former is long while the latter is int, so it's even incompatible
on 64bit architectures.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: wm2000: Fix wrong value references for boolean kctl

commit 00a14c2968e3d55817e0fa35c78106ca840537bf upstream.

The correct values referred by a boolean control are
value.integer.value[], not value.enumerated.item[].
The former is long while the latter is int, so it's even incompatible
on 64bit architectures.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: wm8731: Fix wrong value references for boolean kctl

commit bd14016fbf31aa199026f1e2358eab695f374eb1 upstream.

The correct values referred by a boolean control are
value.integer.value[], not value.enumerated.item[].
The former is long while the latter is int, so it's even incompatible
on 64bit architectures.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: tas5086: Fix wrong value references for boolean kctl

commit 4c523ef61160b7d478371ddc9f48c8ce0a00d675 upstream.

The correct values referred by a boolean control are
value.integer.value[], not value.enumerated.item[].
The former is long while the latter is int, so it's even incompatible
on 64bit architectures.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: wm8960: Fix wrong value references for boolean kctl

commit b4a18c8b1af15ebfa9054a3d2aef7b0a7e6f2a05 upstream.

The correct values referred by a boolean control are
value.integer.value[], not value.enumerated.item[].
The former is long while the latter is int, so it's even incompatible
on 64bit architectures.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: cs4271: Fix wrong value references for boolean kctl

commit e8371aa0fecb73fb8a4b2e0296b025b11e7d6229 upstream.

The correct values referred by a boolean control are
value.integer.value[], not value.enumerated.item[].
The former is long while the latter is int, so it's even incompatible
on 64bit architectures.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Paul Handrigan <Paul.Handrigan@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: sgtl5000: remove useless register write clearing CHRGPUMP_POWERUP

commit c7d910b87d3c8e9fcf4077089ca4327c12eee099 upstream.

The SGTL5000_CHIP_ANA_POWER register is cached. Update the cached
value instead of writing it directly.

Patch inspired by Russell King's more colorful remarks in this
patch:
https://github.com/SolidRun/linux-imx6-3.14/commit/dd4bf6a

Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 3.10.73

target: Allow Write Exclusive non-reservation holders to READ

commit 1ecc7586922662e3ca2f3f0c3f17fec8749fc621 upstream.

For PGR reservation of type Write Exclusive Access, allow all non
reservation holding I_T nexuses with active registrations to READ
from the device.

This addresses a bug where active registrations that attempted
to READ would result in an reservation conflict.

Signed-off-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

target: Allow AllRegistrants to re-RESERVE existing reservation

commit ae450e246e8540300699480a3780a420a028b73f upstream.

This patch changes core_scsi3_pro_release() logic to allow an
existing AllRegistrants type reservation to be re-reserved by
any registered I_T nexus.

This addresses a issue where AllRegistrants type RESERVE was
receiving RESERVATION_CONFLICT status if dev_pr_res_holder did
not match the same I_T nexus, instead of just returning GOOD
status following spc4r34 Section 5.9.9:

"If the device server receives a PERSISTENT RESERVE OUT command
 with RESERVE service action where the TYPE field and the SCOPE
 field contain the same values as the existing type and scope
 from a persistent reservation holder, it shall not make any
 change to the existing persistent reservation and shall complete
 the command with GOOD status."

Reported-by: Ilias Tsitsimpis <i.tsitsimpis@gmail.com>
Cc: Ilias Tsitsimpis <i.tsitsimpis@gmail.com>
Cc: Lee Duncan <lduncan@suse.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

target: Fix R_HOLDER bit usage for AllRegistrants

commit d16ca7c5198fd668db10d2c7b048ed3359c12c54 upstream.

This patch fixes the usage of R_HOLDER bit for an All Registrants
reservation in READ_FULL_STATUS, where only the registration who
issued RESERVE was being reported as having an active reservation.

It changes core_scsi3_pri_read_full_status() to check ahead of the
list walk of active registrations to see if All Registrants is active,
and if so set R_HOLDER bit and scope/type fields for all active
registrations.

Reported-by: Ilias Tsitsimpis <i.tsitsimpis@gmail.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

target/pscsi: Fix NULL pointer dereference in get_device_type

commit 215a8fe4198f607f34ecdbc9969dae783d8b5a61 upstream.

This patch fixes a NULL pointer dereference OOPs with pSCSI backends
within target_core_stat.c code.  The bug is caused by a configfs attr
read if no pscsi_dev_virt->pdv_sd has been configured.

Reported-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iscsi-target: Avoid early conn_logout_comp for iser connections

commit f068fbc82e7696d67b1bb8189306865bedf368b6 upstream.

This patch fixes a iser specific logout bug where early complete()
of conn->conn_logout_comp in iscsit_close_connection() was causing
isert_wait4logout() to complete too soon, triggering a use after
free NULL pointer dereference of iscsi_conn memory.

The complete() was originally added for traditional iscsi-target
when a ISCSI_LOGOUT_OP failed in iscsi_target_rx_opcode(), but given
iser-target does not wait in logout failure, this special case needs
to be avoided.

Reported-by: Sagi Grimberg <sagig@mellanox.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Slava Shwartsman <valyushash@gmail.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

target: Fix reference leak in target_get_sess_cmd() error path

commit 7544e597343e2166daba3f32e4708533aa53c233 upstream.

This patch fixes a se_cmd->cmd_kref leak buf when se_sess->sess_tearing_down
is true within target_get_sess_cmd() submission path code.

This se_cmd reference leak can occur during active session shutdown when
ack_kref=1 is passed by target_submit_cmd_[map_sgls,tmr]() callers.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: at91: pm: fix at91rm9200 standby

commit 84e871660bebfddb9a62ebd6f19d02536e782f0a upstream.

at91rm9200 standby and suspend to ram has been broken since
00482a4078f4. It is wrongly using AT91_BASE_SYS which is a physical address
and actually doesn't correspond to any register on at91rm9200.

Use the correct at91_ramc_base[0] instead.

Fixes: 00482a4078f4 (ARM: at91: implement the standby function for pm/cpuidle)

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipvs: rerouting to local clients is not needed anymore

commit 579eb62ac35845686a7c4286c0a820b4eb1f96aa upstream.

commit f5a41847acc5 ("ipvs: move ip_route_me_harder for ICMP")
from 2.6.37 introduced ip_route_me_harder() call for responses to
local clients, so that we can provide valid rt_src after SNAT.
It was used by TCP to provide valid daddr for ip_send_reply().
After commit 0a5ebb8000c5 ("ipv4: Pass explicit daddr arg to
ip_send_reply()." from 3.0 this rerouting is not needed anymore
and should be avoided, especially in LOCAL_IN.

Fixes 3.12.33 crash in xfrm reported by Florian Wiessner:
"3.12.33 - BUG xfrm_selector_match+0x25/0x2f6"

Reported-by: Smart Weblications GmbH - Florian Wiessner <f.wiessner@smart-weblications.de>
Tested-by: Smart Weblications GmbH - Florian Wiessner <f.wiessner@smart-weblications.de>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipvs: add missing ip_vs_pe_put in sync code

commit 528c943f3bb919aef75ab2fff4f00176f09a4019 upstream.

ip_vs_conn_fill_param_sync() gets in param.pe a module
reference for persistence engine from __ip_vs_pe_getbyname()
but forgets to put it. Problem occurs in backup for
sync protocol v1 (2.6.39).

Also, pe_data usually comes in sync messages for
connection templates and ip_vs_conn_new() copies
the pointer only in this case. Make sure pe_data
is not leaked if it comes unexpectedly for normal
connections. Leak can happen only if bogus messages
are sent to backup server.

Fixes: fe5e7a1efb66 ("IPVS: Backup, Adding Version 1 receive capability")
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/smp: Wait until secondaries are active & online

commit 875ebe940d77a41682c367ad799b4f39f128d3fa upstream.

Anton has a busy ppc64le KVM box where guests sometimes hit the infamous
"kernel BUG at kernel/smpboot.c:134!" issue during boot:

  BUG_ON(td->cpu != smp_processor_id());

Basically a per CPU hotplug thread scheduled on the wrong CPU. The oops
output confirms it:

  CPU: 0
  Comm: watchdog/130

The problem is that we aren't ensuring the CPU active bit is set for the
secondary before allowing the master to continue on. The master unparks
the secondary CPU's kthreads and the scheduler looks for a CPU to run
on. It calls select_task_rq() and realises the suggested CPU is not in
the cpus_allowed mask. It then ends up in select_fallback_rq(), and
since the active bit isnt't set we choose some other CPU to run on.

This seems to have been introduced by 6acbfb96976f "sched: Fix hotplug
vs. set_cpus_allowed_ptr()", which changed from setting active before
online to setting active after online. However that was in turn fixing a
bug where other code assumed an active CPU was also online, so we can't
just revert that fix.

The simplest fix is just to spin waiting for both active & online to be
set. We already have a barrier prior to set_cpu_online() (which also
sets active), to ensure all other setup is completed before online &
active are set.

Fixes: 6acbfb96976f ("sched: Fix hotplug vs. set_cpus_allowed_ptr()")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/vdso: Fix the build on GCC5

commit e893286918d2cde3a94850d8f7101cd1039e0c62 upstream.

On gcc5 the kernel does not link:

  ld: .eh_frame_hdr table[4] FDE at 0000000000000648 overlaps table[5] FDE at 0000000000000670.

Because prior GCC versions always emitted NOPs on ALIGN directives, but
gcc5 started omitting them.

.LSTARTFDEDLSI1 says:

        /* HACK: The dwarf2 unwind routines will subtract 1 from the
           return address to get an address in the middle of the
           presumed call instruction.  Since we didn't get here via
           a call, we need to include the nop before the real start
           to make up for it.  */
        .long .LSTART_sigreturn-1-.     /* PC-relative start address */

But commit 69d0627a7f6e ("x86 vDSO: reorder vdso32 code") from 2.6.25
replaced .org __kernel_vsyscall+32,0x90 by ALIGN right before
__kernel_sigreturn.

Of course, ALIGN need not generate any NOP in there. Esp. gcc5 collapses
vclock_gettime.o and int80.o together with no generated NOPs as "ALIGN".

So fix this by adding to that point at least a single NOP and make the
function ALIGN possibly with more NOPs then.

Kudos for reporting and diagnosing should go to Richard.

Reported-by: Richard Biener <rguenther@suse.de>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1425543211-12542-1-git-send-email-jslaby@suse.cz
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/fpu: Drop_fpu() should not assume that tsk equals current

commit f4c3686386393c120710dd34df2a74183ab805fd upstream.

drop_fpu() does clear_used_math() and usually this is correct
because tsk == current.

However switch_fpu_finish()->restore_fpu_checking() is called before
__switch_to() updates the "current_task" variable. If it fails,
we will wrongly clear the PF_USED_MATH flag of the previous task.

So use clear_stopped_child_used_math() instead.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pekka Riikonen <priikone@iki.fi>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Suresh Siddha <sbsiddha@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20150309171041.GB11388@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/fpu: Avoid math_state_restore() without used_math() in __restore_xstate_sig()

commit a7c80ebcac3068b1c3cb27d538d29558c30010c8 upstream.

math_state_restore() assumes it is called with irqs disabled,
but this is not true if the caller is __restore_xstate_sig().

This means that if ia32_fxstate == T and __copy_from_user()
fails, __restore_xstate_sig() returns with irqs disabled too.

This triggers:

  BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:41
   dump_stack
   ___might_sleep
   ? _raw_spin_unlock_irqrestore
   __might_sleep
   down_read
   ? _raw_spin_unlock_irqrestore
   print_vma_addr
   signal_fault
   sys32_rt_sigreturn

Change __restore_xstate_sig() to call set_used_math()
unconditionally. This avoids enabling and disabling interrupts
in math_state_restore(). If copy_from_user() fails, we can
simply do fpu_finit() by hand.

[ Note: this is only the first step. math_state_restore() should
        not check used_math(), it should set this flag. While
init_fpu() should simply die. ]

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pekka Riikonen <priikone@iki.fi>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Suresh Siddha <sbsiddha@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20150307153844.GB25954@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: aesni - fix memory usage in GCM decryption

commit ccfe8c3f7e52ae83155cb038753f4c75b774ca8a upstream.

The kernel crypto API logic requires the caller to provide the
length of (ciphertext || authentication tag) as cryptlen for the
AEAD decryption operation. Thus, the cipher implementation must
calculate the size of the plaintext output itself and cannot simply use
cryptlen.

The RFC4106 GCM decryption operation tries to overwrite cryptlen memory
in req->dst. As the destination buffer for decryption only needs to hold
the plaintext memory but cryptlen references the input buffer holding
(ciphertext || authentication tag), the assumption of the destination
buffer length in RFC4106 GCM operation leads to a too large size. This
patch simply uses the already calculated plaintext size.

In addition, this patch fixes the offset calculation of the AAD buffer
pointer: as mentioned before, cryptlen already includes the size of the
tag. Thus, the tag does not need to be added. With the addition, the AAD
will be written beyond the already allocated buffer.

Note, this fixes a kernel crash that can be triggered from user space
via AF_ALG(aead) -- simply use the libkcapi test application
from [1] and update it to use rfc4106-gcm-aes.

Using [1], the changes were tested using CAVS vectors to demonstrate
that the crypto operation still delivers the right results.

[1] http://www.chronox.de/libkcapi.html

CC: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libsas: Fix Kernel Crash in smp_execute_task

commit 6302ce4d80aa82b3fdb5c5cd68e7268037091b47 upstream.

This crash was reported:

[  366.947370] sd 3:0:1:0: [sdb] Spinning up disk....
[  368.804046] BUG: unable to handle kernel NULL pointer dereference at           (null)
[  368.804072] IP: [<ffffffff81358457>] __mutex_lock_common.isra.7+0x9c/0x15b
[  368.804098] PGD 0
[  368.804114] Oops: 0002 [#1] SMP
[  368.804143] CPU 1
[  368.804151] Modules linked in: sg netconsole s3g(PO) uinput joydev hid_multitouch usbhid hid snd_hda_codec_via cpufreq_userspace cpufreq_powersave cpufreq_stats uhci_hcd cpufreq_conservative snd_hda_intel snd_hda_codec snd_hwdep snd_pcm sdhci_pci snd_page_alloc sdhci snd_timer snd psmouse evdev serio_raw pcspkr soundcore xhci_hcd shpchp s3g_drm(O) mvsas mmc_core ahci libahci drm i2c_core acpi_cpufreq mperf video processor button thermal_sys dm_dmirror exfat_fs exfat_core dm_zcache dm_mod padlock_aes aes_generic padlock_sha iscsi_target_mod target_core_mod configfs sswipe libsas libata scsi_transport_sas picdev via_cputemp hwmon_vid fuse parport_pc ppdev lp parport autofs4 ext4 crc16 mbcache jbd2 sd_mod crc_t10dif usb_storage scsi_mod ehci_hcd usbcore usb_common
[  368.804749]
[  368.804764] Pid: 392, comm: kworker/u:3 Tainted: P        W  O 3.4.87-logicube-ng.22 #1 To be filled by O.E.M. To be filled by O.E.M./EPIA-M920
[  368.804802] RIP: 0010:[<ffffffff81358457>]  [<ffffffff81358457>] __mutex_lock_common.isra.7+0x9c/0x15b
[  368.804827] RSP: 0018:ffff880117001cc0  EFLAGS: 00010246
[  368.804842] RAX: 0000000000000000 RBX: ffff8801185030d0 RCX: ffff88008edcb420
[  368.804857] RDX: 0000000000000000 RSI: 0000000000000002 RDI: ffff8801185030d4
[  368.804873] RBP: ffff8801181531c0 R08: 0000000000000020 R09: 00000000fffffffe
[  368.804885] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801185030d4
[  368.804899] R13: 0000000000000002 R14: ffff880117001fd8 R15: ffff8801185030d8
[  368.804916] FS:  0000000000000000(0000) GS:ffff88011fc80000(0000) knlGS:0000000000000000
[  368.804931] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[  368.804946] CR2: 0000000000000000 CR3: 000000000160b000 CR4: 00000000000006e0
[  368.804962] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  368.804978] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[  368.804995] Process kworker/u:3 (pid: 392, threadinfo ffff880117000000, task ffff8801181531c0)
[  368.805009] Stack:
[  368.805017]  ffff8801185030d8 0000000000000000 ffffffff8161ddf0 ffffffff81056f7c
[  368.805062]  000000000000b503 ffff8801185030d0 ffff880118503000 0000000000000000
[  368.805100]  ffff8801185030d0 ffff8801188b8000 ffff88008edcb420 ffffffff813583ac
[  368.805135] Call Trace:
[  368.805153]  [<ffffffff81056f7c>] ? up+0xb/0x33
[  368.805168]  [<ffffffff813583ac>] ? mutex_lock+0x16/0x25
[  368.805194]  [<ffffffffa018c414>] ? smp_execute_task+0x4e/0x222 [libsas]
[  368.805217]  [<ffffffffa018ce1c>] ? sas_find_bcast_dev+0x3c/0x15d [libsas]
[  368.805240]  [<ffffffffa018ce4f>] ? sas_find_bcast_dev+0x6f/0x15d [libsas]
[  368.805264]  [<ffffffffa018e989>] ? sas_ex_revalidate_domain+0x37/0x2ec [libsas]
[  368.805280]  [<ffffffff81355a2a>] ? printk+0x43/0x48
[  368.805296]  [<ffffffff81359a65>] ? _raw_spin_unlock_irqrestore+0xc/0xd
[  368.805318]  [<ffffffffa018b767>] ? sas_revalidate_domain+0x85/0xb6 [libsas]
[  368.805336]  [<ffffffff8104e5d9>] ? process_one_work+0x151/0x27c
[  368.805351]  [<ffffffff8104f6cd>] ? worker_thread+0xbb/0x152
[  368.805366]  [<ffffffff8104f612>] ? manage_workers.isra.29+0x163/0x163
[  368.805382]  [<ffffffff81052c4e>] ? kthread+0x79/0x81
[  368.805399]  [<ffffffff8135fea4>] ? kernel_thread_helper+0x4/0x10
[  368.805416]  [<ffffffff81052bd5>] ? kthread_flush_work_fn+0x9/0x9
[  368.805431]  [<ffffffff8135fea0>] ? gs_change+0x13/0x13
[  368.805442] Code: 83 7d 30 63 7e 04 f3 90 eb ab 4c 8d 63 04 4c 8d 7b 08 4c 89 e7 e8 fa 15 00 00 48 8b 43 10 4c 89 3c 24 48 89 63 10 48 89 44 24 08 <48> 89 20 83 c8 ff 48 89 6c 24 10 87 03 ff c8 74 35 4d 89 ee 41
[  368.805851] RIP  [<ffffffff81358457>] __mutex_lock_common.isra.7+0x9c/0x15b
[  368.805877]  RSP <ffff880117001cc0>
[  368.805886] CR2: 0000000000000000
[  368.805899] ---[ end trace b720682065d8f4cc ]---

It's directly caused by 89d3cf6 [SCSI] libsas: add mutex for SMP task
execution, but shows a deeper cause: expander functions expect to be able to
cast to and treat domain devices as expanders.  The correct fix is to only do
expander discover when we know we've got an expander device to avoid wrongly
casting a non-expander device.

Reported-by: Praveen Murali <pmurali@logicube.com>
Tested-by: Praveen Murali <pmurali@logicube.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen-pciback: limit guest control of command register

commit af6fc858a35b90e89ea7a7ee58e66628c55c776b upstream.

Otherwise the guest can abuse that control to cause e.g. PCIe
Unsupported Request responses by disabling memory and/or I/O decoding
and subsequently causing (CPU side) accesses to the respective address
ranges, which (depending on system configuration) may be fatal to the
host.

Note that to alter any of the bits collected together as
PCI_COMMAND_GUEST permissive mode is now required to be enabled
globally or on the specific device.

This is CVE-2015-2150 / XSA-120.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nilfs2: fix deadlock of segment constructor during recovery

commit 283ee1482f349d6c0c09dfb725db5880afc56813 upstream.

According to a report from Yuxuan Shui, nilfs2 in kernel 3.19 got stuck
during recovery at mount time.  The code path that caused the deadlock was
as follows:

  nilfs_fill_super()
    load_nilfs()
      nilfs_salvage_orphan_logs()
        * Do roll-forwarding, attach segment constructor for recovery,
          and kick it.

        nilfs_segctor_thread()
          nilfs_segctor_thread_construct()
           * A lock is held with nilfs_transaction_lock()
             nilfs_segctor_do_construct()
               nilfs_segctor_drop_written_files()
                 iput()
                   iput_final()
                     write_inode_now()
                       writeback_single_inode()
                         __writeback_single_inode()
                           do_writepages()
                             nilfs_writepage()
                               nilfs_construct_dsync_segment()
                                 nilfs_transaction_lock() --> deadlock

This can happen if commit 7ef3ff2fea8b ("nilfs2: fix deadlock of segment
constructor over I_SYNC flag") is applied and roll-forward recovery was
performed at mount time.  The roll-forward recovery can happen if datasync
write is done and the file system crashes immediately after that.  For
instance, we can reproduce the issue with the following steps:

 < nilfs2 is mounted on /nilfs (device: /dev/sdb1) >
 # dd if=/dev/zero of=/nilfs/test bs=4k count=1 && sync
 # dd if=/dev/zero of=/nilfs/test conv=notrunc oflag=dsync bs=4k
 count=1 && reboot -nfh
 < the system will immediately reboot >
 # mount -t nilfs2 /dev/sdb1 /nilfs

The deadlock occurs because iput() can run segment constructor through
writeback_single_inode() if MS_ACTIVE flag is not set on sb->s_flags.  The
above commit changed segment constructor so that it calls iput()
asynchronously for inodes with i_nlink == 0, but that change was
imperfect.

This fixes the another deadlock by deferring iput() in segment constructor
even for the case that mount is not finished, that is, for the case that
MS_ACTIVE flag is not set.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Reported-by: Yuxuan Shui <yshuiv7@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

regulator: core: Fix enable GPIO reference counting

commit 29d62ec5f87fbeec8413e2215ddad12e7f972e4c upstream.

Normally _regulator_do_enable() isn't called on an already-enabled
rdev.  That's because the main caller, _regulator_enable() always
calls _regulator_is_enabled() and only calls _regulator_do_enable() if
the rdev was not already enabled.

However, there is one caller of _regulator_do_enable() that doesn't
check: regulator_suspend_finish().  While we might want to make
regulator_suspend_finish() behave more like _regulator_enable(), it's
probably also a good idea to make _regulator_do_enable() robust if it
is called on an already enabled rdev.

At the moment, _regulator_do_enable() is _not_ robust for already
enabled rdevs if we're using an ena_pin.  Each time
_regulator_do_enable() is called for an rdev using an ena_pin the
reference count of the ena_pin is incremented even if the rdev was
already enabled.  This is not as intended because the ena_pin is for
something else: for keeping track of how many active rdevs there are
sharing the same ena_pin.

Here's how the reference counting works here:

* Each time _regulator_enable() is called we increment
  rdev->use_count, so _regulator_enable() calls need to be balanced
  with _regulator_disable() calls.

* There is no explicit reference counting in _regulator_do_enable()
  which is normally just a warapper around rdev->desc->ops->enable()
  with code for supporting delays.  It's not expected that the
  "ops->enable()" call do reference counting.

* Since regulator_ena_gpio_ctrl() does have reference counting
  (handling the sharing of the pin amongst multiple rdevs), we
  shouldn't call it if the current rdev is already enabled.

Note that as part of this we cleanup (remove) the initting of
ena_gpio_state in regulator_register().  In _regulator_do_enable(),
_regulator_do_disable() and _regulator_is_enabled() is is clear that
ena_gpio_state should be the state of whether this particular rdev has
requested the GPIO be enabled.  regulator_register() was initting it
as the actual state of the pin.

Fixes: 967cfb18c0e3 ("regulator: core: manage enable GPIO list")
Signed-off-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

regulator: Only enable disabled regulators on resume

commit 0548bf4f5ad6fc3bd93c4940fa48078b34609682 upstream.

The _regulator_do_enable() call ought to be a no-op when called on an
already-enabled regulator.  However, as an optimization
_regulator_enable() doesn't call _regulator_do_enable() on an already
enabled regulator.  That means we never test the case of calling
_regulator_do_enable() during normal usage and there may be hidden
bugs or warnings.  We have seen warnings issued by the tps65090 driver
and bugs when using the GPIO enable pin.

Let's match the same optimization that _regulator_enable() in
regulator_suspend_finish().  That may speed up suspend/resume and also
avoids exposing hidden bugs.

[Use much clearer commit message from Doug Anderson]

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Treat stereo-to-mono mix properly

commit cc261738add93947d138d2fabad9f4dbed4e5c00 upstream.

The commit [ef403edb7558: ALSA: hda - Don't access stereo amps for
mono channel widgets] fixed the handling of mono widgets in general,
but it still misses an exceptional case: namely, a mono mixer widget
taking a single stereo input.  In this case, it has stereo volumes
although it's a mono widget, and thus we have to take care of both
left and right input channels, as stated in HD-audio spec ("7.1.3
Widget Interconnection Rules").

This patch covers this missing piece by adding proper checks of stereo
amps in both the generic parser and the proc output codes.

Reported-by: Raymond Yau <superquad.vortex2@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Add workaround for MacBook Air 5,2 built-in mic

commit 2ddee91abe9cc34ddb6294ee14702b46ae07d460 upstream.

MacBook Air 5,2 has the same problem as MacBook Pro 8,1 where the
built-in mic records only the right channel.  Apply the same
workaround as MBP8,1 to spread the mono channel via a Cirrus codec
vendor-specific COEF setup.

Reported-and-tested-by: Vasil Zlatanov <vasil.zlatanov@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Set single_adc_amp flag for CS420x codecs

commit bad994f5b4ab57eec8d56c180edca00505c3eeb2 upstream.

CS420x codecs seem to deal only the single amps of ADC nodes even
though the nodes receive multiple inputs.  This leads to the
inconsistent amp value after S3/S4 resume, for example.

The fix is just to set codec->single_adc_amp flag.  Then the driver
handles these ADC amps as if single connections.

Reported-and-tested-by: Vasil Zlatanov <vasil.zlatanov@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Don't access stereo amps for mono channel widgets

commit ef403edb75580a3ec5d155f5de82155f0419c621 upstream.

The current HDA generic parser initializes / modifies the amp values
always in stereo, but this seems causing the problem on ALC3229 codec
that has a few mono channel widgets: namely, these mono widgets react
to actions for both channels equally.

In the driver code, we do care the mono channel and create a control
only for the left channel (as defined in HD-audio spec) for such a
node.  When the control is updated, only the left channel value is
changed.  However, in the resume, the right channel value is also
restored from the initial value we took as stereo, and this overwrites
the left channel value.  This ends up being the silent output as the
right channel has been never touched and remains muted.

This patch covers the places where unconditional stereo amp accesses
are done and converts to the conditional accesses.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=94581
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Fix built-in mic on Compaq Presario CQ60

commit ddb6ca75b5671b8fbf1909bc588c449ee74b34f9 upstream.

Compaq Presario CQ60 laptop with CX20561 gives a wrong pin for the
built-in mic NID 0x17 instead of NID 0x1d, and it results in the
non-working mic.  This patch just remaps the pin correctly via fixup.

Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=920604
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: control: Add sanity checks for user ctl id name string

commit be3bb8236db2d0fcd705062ae2e2a9d75131222f upstream.

There was no check about the id string of user control elements, so we
accepted even a control element with an empty string, which is
obviously bogus.  This patch adds more sanity checks of id strings.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi: pl022: Fix race in giveback() leading to driver lock-up

commit cd6fa8d2ca53cac3226fdcffcf763be390abae32 upstream.

Commit fd316941c ("spi/pl022: disable port when unused") introduced a race,
which leads to possible driver lock up (easily reproducible on SMP).

The problem happens in giveback() function where the completion of the transfer
is signalled to SPI subsystem and then the HW SPI controller is disabled. Another
transfer might be setup in between, which brings driver in locked-up state.

Exact event sequence on SMP:

core0                                   core1

                                        => pump_transfers()
                                        /* message->state == STATE_DONE */
                                          => giveback()
                                            => spi_finalize_current_message()

=> pl022_unprepare_transfer_hardware()
=> pl022_transfer_one_message
  => flush()
  => do_interrupt_dma_transfer()
    => set_up_next_transfer()
    /* Enable SSP, turn on interrupts */
    writew((readw(SSP_CR1(pl022->virtbase)) |
           SSP_CR1_MASK_SSE), SSP_CR1(pl022->virtbase));

...

=> pl022_interrupt_handler()
  => readwriter()

                                        /* disable the SPI/SSP operation */
                                        => writew((readw(SSP_CR1(pl022->virtbase)) &
                                                  (~SSP_CR1_MASK_SSE)), SSP_CR1(pl022->virtbase));

Lockup! SPI controller is disabled and the data will never be received. Whole
SPI subsystem is waiting for transfer ACK and blocked.

So, only signal transfer completion after disabling the controller.

Fixes: fd316941c (spi/pl022: disable port when unused)
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tpm/ibmvtpm: Additional LE support for tpm_ibmvtpm_send

commit 62dfd912ab3b5405b6fe72d0135c37e9648071f1 upstream.

Problem: When IMA and VTPM are both enabled in kernel config,
kernel hangs during bootup on LE OS.

Why?: IMA calls tpm_pcr_read() which results in tpm_ibmvtpm_send
and tpm_ibmtpm_recv getting called. A trace showed that
tpm_ibmtpm_recv was hanging.

Resolution: tpm_ibmtpm_recv was hanging because tpm_ibmvtpm_send
was sending CRQ message that probably did not make much sense
to phype because of Endianness. The fix below sends correctly
converted CRQ for LE. This was not caught before because it
seems IMA is not enabled by default in kernel config and
IMA exercises this particular code path in vtpm.

Tested with IMA and VTPM enabled in kernel config and VTPM
enabled on both a BE OS and a LE OS ppc64 lpar. This exercised
CRQ and TPM command code paths in vtpm.
Patch is against Peter's tpmdd tree on github which included
Vicky's previous vtpm le patches.

Signed-off-by: Joy Latten <jmlatten@linux.vnet.ibm.com>
Reviewed-by: Ashley Lai <ashley@ahsleylai.com>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

workqueue: fix hang involving racing cancel[_delayed]_work_sync()'s for PREEMPT_NONE

commit 8603e1b30027f943cc9c1eef2b291d42c3347af1 upstream.

cancel[_delayed]_work_sync() are implemented using
__cancel_work_timer() which grabs the PENDING bit using
try_to_grab_pending() and then flushes the work item with PENDING set
to prevent the on-going execution of the work item from requeueing
itself.

try_to_grab_pending() can always grab PENDING bit without blocking
except when someone else is doing the above flushing during
cancelation.  In that case, try_to_grab_pending() returns -ENOENT.  In
this case, __cancel_work_timer() currently invokes flush_work().  The
assumption is that the completion of the work item is what the other
canceling task would be waiting for too and thus waiting for the same
condition and retrying should allow forward progress without excessive
busy looping

Unfortunately, this doesn't work if preemption is disabled or the
latter task has real time priority.  Let's say task A just got woken
up from flush_work() by the completion of the target work item.  If,
before task A starts executing, task B gets scheduled and invokes
__cancel_work_timer() on the same work item, its try_to_grab_pending()
will return -ENOENT as the work item is still being canceled by task A
and flush_work() will also immediately return false as the work item
is no longer executing.  This puts task B in a busy loop possibly
preventing task A from executing and clearing the canceling state on
the work item leading to a hang.

task A task B worker

executing work
__cancel_work_timer()
  try_to_grab_pending()
  set work CANCELING
  flush_work()
    block for work completion
completion, wakes up A
__cancel_work_timer()
while (forever) {
  try_to_grab_pending()
    -ENOENT as work is being canceled
  flush_work()
    false as work is no longer executing
}

This patch removes the possible hang by updating __cancel_work_timer()
to explicitly wait for clearing of CANCELING rather than invoking
flush_work() after try_to_grab_pending() fails with -ENOENT.

Link: http://lkml.kernel.org/g/20150206171156.GA8942@axis.com
v3: bit_waitqueue() can't be used for work items defined in vmalloc
    area.  Switched to custom wake function which matches the target
    work item and exclusive wait and wakeup.

v2: v1 used wake_up() on bit_waitqueue() which leads to NULL deref if
    the target bit waitqueue has wait_bit_queue's on it.  Use
    DEFINE_WAIT_BIT() and __wake_up_bit() instead.  Reported by Tomeu
    Vizoso.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Rabin Vincent <rabin.vincent@axis.com>
Cc: Tomeu Vizoso <tomeu.vizoso@gmail.com>
Tested-by: Jesper Nilsson <jesper.nilsson@axis.com>
Tested-by: Rabin Vincent <rabin.vincent@axis.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: add missing initialisations in CAN related skbuffs

commit 969439016d2cf61fef53a973d7e6d2061c3793b1 upstream.

When accessing CAN network interfaces with AF_PACKET sockets e.g. by dhclient
this can lead to a skb_under_panic due to missing skb initialisations.

Add the missing initialisations at the CAN skbuff creation times on driver
level (rx path) and in the network layer (tx path).

Reported-by: Austin Schuh <austin@peloton-tech.com>
Reported-by: Daniel Steer <daniel.steer@mclaren.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change email address for 8250_pci

commit f2e0ea861117bda073d1d7ffbd3120c07c0d5d34 upstream.

I'm still receiving reports to my email address, so let's point this
at the linux-serial mailing list instead.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

virtio_console: init work unconditionally

commit 4f6e24ed9de8634d6471ef86b382cba6d4e57ca8 upstream.

when multiport is off, we don't initialize config work,
but we then cancel uninitialized control_work on freeze.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: notify: don't move pages

commit 0d2783626a53d4c922f82d51fa675cb5d13f0d36 upstream.

fuse_try_move_page() is not prepared for replacing pages that have already
been read.

Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: set stolen page uptodate

commit aa991b3b267e24f578bac7b09cc57579b660304b upstream.

Regular pipe buffers' ->steal method (generic_pipe_buf_steal()) doesn't set
PG_uptodate.

Don't warn on this condition, just set the uptodate flag.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon: drop setting UPLL to sleep mode

commit a17d4996e051e78d164989b894608cf37cd5110b upstream.

Just keep it working, seems to fix some PLL problems.

Bug: https://bugs.freedesktop.org/show_bug.cgi?id=73378

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon: do a posting read in rs600_set_irq

commit 54acf107e4e66d1f4a697e08a7f60dba9fcf07c3 upstream.

To make sure the writes go through the pci bridge.

bug:
https://bugzilla.kernel.org/show_bug.cgi?id=90741

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon: do a posting read in si_set_irq

commit 0586915ec10d0ae60de5cd3381ad25a704760402 upstream.

To make sure the writes go through the pci bridge.

bug:
https://bugzilla.kernel.org/show_bug.cgi?id=90741

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon: do a posting read in r600_set_irq

commit 9d1393f23d5656cdd5f368efd60694d4aeed81d3 upstream.

To make sure the writes go through the pci bridge.

bug:
https://bugzilla.kernel.org/show_bug.cgi?id=90741

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon: do a posting read in r100_set_irq

commit f957063fee6392bb9365370db6db74dc0b2dce0a upstream.

To make sure the writes go through the pci bridge.

bug:
https://bugzilla.kernel.org/show_bug.cgi?id=90741

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon: do a posting read in evergreen_set_irq

commit c320bb5f6dc0cb88a811cbaf839303e0a3916a92 upstream.

To make sure the writes go through the pci bridge.

bug:
https://bugzilla.kernel.org/show_bug.cgi?id=90741

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon: fix DRM_IOCTL_RADEON_CS oops

commit a28b2a47edcd0cb7c051b445f71a426000394606 upstream.

Passing zeroed drm_radeon_cs struct to DRM_IOCTL_RADEON_CS produces the
following oops.

Fix by always calling INIT_LIST_HEAD() to avoid the crash in list_sort().

----------------------------------

 #include <stdint.h>
 #include <fcntl.h>
 #include <unistd.h>
 #include <sys/ioctl.h>
 #include <drm/radeon_drm.h>

 static const struct drm_radeon_cs cs;

 int main(int argc, char **argv)
 {
         return ioctl(open(argv[1], O_RDWR), DRM_IOCTL_RADEON_CS, &cs);
 }

----------------------------------

[ttrantal@test2 ~]$ ./main /dev/dri/card0
[   46.904650] BUG: unable to handle kernel NULL pointer dereference at           (null)
[   46.905022] IP: [<ffffffff814d6df2>] list_sort+0x42/0x240
[   46.905022] PGD 68f29067 PUD 688b5067 PMD 0
[   46.905022] Oops: 0002 [#1] SMP
[   46.905022] CPU: 0 PID: 2413 Comm: main Not tainted 4.0.0-rc1+ #58
[   46.905022] Hardware name: Hewlett-Packard HP Compaq dc5750 Small Form Factor/0A64h, BIOS 786E3 v02.10 01/25/2007
[   46.905022] task: ffff880058e2bcc0 ti: ffff880058e64000 task.ti: ffff880058e64000
[   46.905022] RIP: 0010:[<ffffffff814d6df2>]  [<ffffffff814d6df2>] list_sort+0x42/0x240
[   46.905022] RSP: 0018:ffff880058e67998  EFLAGS: 00010246
[   46.905022] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[   46.905022] RDX: ffffffff81644410 RSI: ffff880058e67b40 RDI: ffff880058e67a58
[   46.905022] RBP: ffff880058e67a88 R08: 0000000000000000 R09: 0000000000000000
[   46.905022] R10: ffff880058e2bcc0 R11: ffffffff828e6ca0 R12: ffffffff81644410
[   46.905022] R13: ffff8800694b8018 R14: 0000000000000000 R15: ffff880058e679b0
[   46.905022] FS:  00007fdc65a65700(0000) GS:ffff88006d600000(0000) knlGS:0000000000000000
[   46.905022] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   46.905022] CR2: 0000000000000000 CR3: 0000000058dd9000 CR4: 00000000000006f0
[   46.905022] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   46.905022] DR3: 0000000000000000 DR6: 00000000ffff4ff0 DR7: 0000000000000400
[   46.905022] Stack:
[   46.905022]  ffff880058e67b40 ffff880058e2bcc0 ffff880058e67a78 0000000000000000
[   46.905022]  0000000000000000 0000000000000000 0000000000000000 0000000000000000
[   46.905022]  0000000000000000 0000000000000000 0000000000000000 0000000000000000
[   46.905022] Call Trace:
[   46.905022]  [<ffffffff81644a65>] radeon_cs_parser_fini+0x195/0x220
[   46.905022]  [<ffffffff81645069>] radeon_cs_ioctl+0xa9/0x960
[   46.905022]  [<ffffffff815e1f7c>] drm_ioctl+0x19c/0x640
[   46.905022]  [<ffffffff810f8fdd>] ? trace_hardirqs_on_caller+0xfd/0x1c0
[   46.905022]  [<ffffffff810f90ad>] ? trace_hardirqs_on+0xd/0x10
[   46.905022]  [<ffffffff8160c066>] radeon_drm_ioctl+0x46/0x80
[   46.905022]  [<ffffffff81211868>] do_vfs_ioctl+0x318/0x570
[   46.905022]  [<ffffffff81462ef6>] ? selinux_file_ioctl+0x56/0x110
[   46.905022]  [<ffffffff81211b41>] SyS_ioctl+0x81/0xa0
[   46.905022]  [<ffffffff81dc6312>] system_call_fastpath+0x12/0x17
[   46.905022] Code: 48 89 b5 10 ff ff ff 0f 84 03 01 00 00 4c 8d bd 28 ff ff
ff 31 c0 48 89 fb b9 15 00 00 00 49 89 d4 4c 89 ff f3 48 ab 48 8b 46 08 <48> c7
00 00 00 00 00 48 8b 0e 48 85 c9 0f 84 7d 00 00 00 c7 85
[   46.905022] RIP  [<ffffffff814d6df2>] list_sort+0x42/0x240
[   46.905022]  RSP <ffff880058e67998>
[   46.905022] CR2: 0000000000000000
[   47.149253] ---[ end trace 09576b4e8b2c20b8 ]---

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tommi Rantala <tt.rantala@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: make connect() mem charging friendly

[ Upstream commit 355a901e6cf1b2b763ec85caa2a9f04fbcc4ab4a ]

While working on sk_forward_alloc problems reported by Denys
Fedoryshchenko, we found that tcp connect() (and fastopen) do not call
sk_wmem_schedule() for SYN packet (and/or SYN/DATA packet), so
sk_forward_alloc is negative while connect is in progress.

We can fix this by calling regular sk_stream_alloc_skb() both for the
SYN packet (in tcp_connect()) and the syn_data packet in
tcp_send_syn_data()

Then, tcp_send_syn_data() can avoid copying syn_data as we simply
can manipulate syn_data->cb[] to remove SYN flag (and increment seq)

Instead of open coding memcpy_fromiovecend(), simply use this helper.

This leaves in socket write queue clean fast clone skbs.

This was tested against our fastopen packetdrill tests.

Reported-by: Denys Fedoryshchenko <nuclearcat@nuclearcat.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: compat: Update get_compat_msghdr() to match copy_msghdr_from_user() behaviour

[ Upstream commit 91edd096e224941131f896b86838b1e59553696a ]

Commit db31c55a6fb2 (net: clamp ->msg_namelen instead of returning an
error) introduced the clamping of msg_namelen when the unsigned value
was larger than sizeof(struct sockaddr_storage). This caused a
msg_namelen of -1 to be valid. The native code was subsequently fixed by
commit dbb490b96584 (net: socket: error on a negative msg_namelen).

In addition, the native code sets msg_namelen to 0 when msg_name is
NULL. This was done in commit (6a2a2b3ae075 net:socket: set msg_namelen
to 0 if msg_name is passed as NULL in msghdr struct from userland) and
subsequently updated by 08adb7dabd48 (fold verify_iovec() into
copy_msghdr_from_user()).

This patch brings the get_compat_msghdr() in line with
copy_msghdr_from_user().

Fixes: db31c55a6fb2 (net: clamp ->msg_namelen instead of returning an error)
Cc: David S. Miller <davem@davemloft.net>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: fix tcp fin memory accounting

[ Upstream commit d22e1537181188e5dc8cbc51451832625035bdc2 ]

tcp_send_fin() does not account for the memory it allocates properly, so
sk_forward_alloc can be negative in cases where we've sent a FIN:

ss example output (ss -amn | grep -B1 f4294):
tcp    FIN-WAIT-1 0      1            192.168.0.1:45520         192.0.2.1:8080
skmem:(r0,rb87380,t0,tb87380,f4294966016,w1280,o0,bl0)
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "net: cx82310_eth: use common match macro"

[ Upstream commit 8d006e0105978619fb472e150c88b0d49337fe2b ]

This reverts commit 11ad714b98f6d9ca0067568442afe3e70eb94845 because
it breaks cx82310_eth.

The custom USB_DEVICE_CLASS macro matches
bDeviceClass, bDeviceSubClass and bDeviceProtocol
but the common USB_DEVICE_AND_INTERFACE_INFO matches
bInterfaceClass, bInterfaceSubClass and bInterfaceProtocol instead, which are
not specified.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rxrpc: bogus MSG_PEEK test in rxrpc_recvmsg()

[ Upstream commit 7d985ed1dca5c90535d67ce92ef6ca520302340a ]

[I would really like an ACK on that one from dhowells; it appears to be
quite straightforward, but...]

MSG_PEEK isn't passed to ->recvmsg() via msg->msg_flags; as the matter of
fact, neither the kernel users of rxrpc, nor the syscalls ever set that bit
in there.  It gets passed via flags; in fact, another such check in the same
function is done correctly - as flags & MSG_PEEK.

It had been that way (effectively disabled) for 8 years, though, so the patch
needs beating up - that case had never been tested.  If it is correct, it's
-stable fodder.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

caif: fix MSG_OOB test in caif_seqpkt_recvmsg()

[ Upstream commit 3eeff778e00c956875c70b145c52638c313dfb23 ]

It should be checking flags, not msg->msg_flags.  It's ->sendmsg()
instances that need to look for that in ->msg_flags, ->recvmsg() ones
(including the other ->recvmsg() instance in that file, as well as
unix_dgram_recvmsg() this one claims to be imitating) check in flags.
Braino had been introduced in commit dcda13 ("caif: Bugfix - use MSG_TRUNC
in receive") back in 2010, so it goes quite a while back.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

inet_diag: fix possible overflow in inet_diag_dump_one_icsk()

[ Upstream commit c8e2c80d7ec00d020320f905822bf49c5ad85250 ]

inet_diag_dump_one_icsk() allocates too small skb.

Add inet_sk_attr_size() helper right before inet_sk_diag_fill()
so that it can be updated if/when new attributes are added.

iproute2/ss currently does not use this dump_one() interface,
this might explain nobody noticed this problem yet.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rds: avoid potential stack overflow

[ Upstream commit f862e07cf95d5b62a5fc5e981dd7d0dbaf33a501 ]

The rds_iw_update_cm_id function stores a large 'struct rds_sock' object
on the stack in order to pass a pair of addresses. This happens to just
fit withint the 1024 byte stack size warning limit on x86, but just
exceed that limit on ARM, which gives us this warning:

net/rds/iw_rdma.c:200:1: warning: the frame size of 1056 bytes is larger than 1024 bytes [-Wframe-larger-than=]

As the use of this large variable is basically bogus, we can rearrange
the code to not do that. Instead of passing an rds socket into
rds_iw_get_device, we now just pass the two addresses that we have
available in rds_iw_update_cm_id, and we change rds_iw_get_mr accordingly,
to create two address structures on the stack there.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: sysctl_net_core: check SNDBUF and RCVBUF for min length

[ Upstream commit b1cb59cf2efe7971d3d72a7b963d09a512d994c9 ]

sysctl has sysctl.net.core.rmem_*/wmem_* parameters which can be
set to incorrect values. Given that 'struct sk_buff' allocates from
rcvbuf, incorrectly set buffer length could result to memory
allocation failures. For example, set them as follows:

    # sysctl net.core.rmem_default=64
      net.core.wmem_default = 64
    # sysctl net.core.wmem_default=64
      net.core.wmem_default = 64
    # ping localhost -s 1024 -i 0 > /dev/null

This could result to the following failure:

skbuff: skb_over_panic: text:ffffffff81628db4 len:-32 put:-32
head:ffff88003a1cc200 data:ffff88003a1cc200 tail:0xffffffe0 end:0xc0 dev:<NULL>
kernel BUG at net/core/skbuff.c:102!
invalid opcode: 0000 [#1] SMP
...
task: ffff88003b7f5550 ti: ffff88003ae88000 task.ti: ffff88003ae88000
RIP: 0010:[<ffffffff8155fbd1>]  [<ffffffff8155fbd1>] skb_put+0xa1/0xb0
RSP: 0018:ffff88003ae8bc68  EFLAGS: 00010296
RAX: 000000000000008d RBX: 00000000ffffffe0 RCX: 0000000000000000
RDX: ffff88003fdcf598 RSI: ffff88003fdcd9c8 RDI: ffff88003fdcd9c8
RBP: ffff88003ae8bc88 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000001 R11: 00000000000002b2 R12: 0000000000000000
R13: 0000000000000000 R14: ffff88003d3f7300 R15: ffff88000012a900
FS:  00007fa0e2b4a840(0000) GS:ffff88003fc00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000d0f7e0 CR3: 000000003b8fb000 CR4: 00000000000006f0
Stack:
 ffff88003a1cc200 00000000ffffffe0 00000000000000c0 ffffffff818cab1d
 ffff88003ae8bd68 ffffffff81628db4 ffff88003ae8bd48 ffff88003b7f5550
 ffff880031a09408 ffff88003b7f5550 ffff88000012aa48 ffff88000012ab00
Call Trace:
 [<ffffffff81628db4>] unix_stream_sendmsg+0x2c4/0x470
 [<ffffffff81556f56>] sock_write_iter+0x146/0x160
 [<ffffffff811d9612>] new_sync_write+0x92/0xd0
 [<ffffffff811d9cd6>] vfs_write+0xd6/0x180
 [<ffffffff811da499>] SyS_write+0x59/0xd0
 [<ffffffff81651532>] system_call_fastpath+0x12/0x17
Code: 00 00 48 89 44 24 10 8b 87 c8 00 00 00 48 89 44 24 08 48 8b 87 d8 00
      00 00 48 c7 c7 30 db 91 81 48 89 04 24 31 c0 e8 4f a8 0e 00 <0f> 0b
      eb fe 66 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 48 83
RIP  [<ffffffff8155fbd1>] skb_put+0xa1/0xb0
RSP <ffff88003ae8bc68>
Kernel panic - not syncing: Fatal exception

Moreover, the possible minimum is 1, so we can get another kernel panic:
...
BUG: unable to handle kernel paging request at ffff88013caee5c0
IP: [<ffffffff815604cf>] __alloc_skb+0x12f/0x1f0
...

Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sparc64: Fix several bugs in memmove().

[ Upstream commit 2077cef4d5c29cf886192ec32066f783d6a80db8 ]

Firstly, handle zero length calls properly.  Believe it or not there
are a few of these happening during early boot.

Next, we can't just drop to a memcpy() call in the forward copy case
where dst <= src.  The reason is that the cache initializing stores
used in the Niagara memcpy() implementations can end up clearing out
cache lines before we've sourced their original contents completely.

For example, considering NG4memcpy, the main unrolled loop begins like
this:

     load   src + 0x00
     load   src + 0x08
     load   src + 0x10
     load   src + 0x18
     load   src + 0x20
     store  dst + 0x00

Assume dst is 64 byte aligned and let's say that dst is src - 8 for
this memcpy() call.  That store at the end there is the one to the
first line in the cache line, thus clearing the whole line, which thus
clobbers "src + 0x28" before it even gets loaded.

To avoid this, just fall through to a simple copy only mildly
optimized for the case where src and dst are 8 byte aligned and the
length is a multiple of 8 as well.  We could get fancy and call
GENmemcpy() but this is good enough for how this thing is actually
used.

Reported-by: David Ahern <david.ahern@oracle.com>
Reported-by: Bob Picco <bpicco@meloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sparc: Touch NMI watchdog when walking cpus and calling printk

[ Upstream commit 31aaa98c248da766ece922bbbe8cc78cfd0bc920 ]

With the increase in number of CPUs calls to functions that dump
output to console (e.g., arch_trigger_all_cpu_backtrace) can take
a long time to complete. If IRQs are disabled eventually the NMI
watchdog kicks in and creates more havoc. Avoid by telling the NMI
watchdog everything is ok.

Signed-off-by: David Ahern <david.ahern@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sparc: perf: Make counting mode actually work

[ Upstream commit d51291cb8f32bfae6b331e1838651f3ddefa73a5 ]

Currently perf-stat (aka, counting mode) does not work:

$ perf stat ls
...
 Performance counter stats for 'ls':

          1.585665      task-clock (msec)         #    0.580 CPUs utilized
                24      context-switches          #    0.015 M/sec
                 0      cpu-migrations            #    0.000 K/sec
                86      page-faults               #    0.054 M/sec
   <not supported>      cycles
   <not supported>      stalled-cycles-frontend
   <not supported>      stalled-cycles-backend
   <not supported>      instructions
   <not supported>      branches
   <not supported>      branch-misses

       0.002735100 seconds time elapsed

The reason is that state is never reset (stays with PERF_HES_UPTODATE set).
Add a call to sparc_pmu_enable_event during the added_event handling.
Clean up the encoding since pmu_start calls sparc_pmu_enable_event which
does the same. Passing PERF_EF_RELOAD to sparc_pmu_start means the call
to sparc_perf_event_set_period can be removed as well.

With this patch:

$ perf stat ls
...
 Performance counter stats for 'ls':

          1.552890      task-clock (msec)         #    0.552 CPUs utilized
                24      context-switches          #    0.015 M/sec
                 0      cpu-migrations            #    0.000 K/sec
                86      page-faults               #    0.055 M/sec
         5,748,997      cycles                    #    3.702 GHz
   <not supported>      stalled-cycles-frontend:HG
   <not supported>      stalled-cycles-backend:HG
         1,684,362      instructions:HG           #    0.29  insns per cycle
           295,133      branches:HG               #  190.054 M/sec
            28,007      branch-misses:HG          #    9.49% of all branches

       0.002815665 seconds time elapsed

Signed-off-by: David Ahern <david.ahern@oracle.com>
Acked-by: Bob Picco <bob.picco@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sparc: perf: Remove redundant perf_pmu_{en|dis}able calls

[ Upstream commit 5b0d4b5514bbcce69b516d0742f2cfc84ebd6db3 ]

perf_pmu_disable is called by core perf code before pmu->del and the
enable function is called by core perf code afterwards. No need to
call again within sparc_pmu_del.

Ditto for pmu->add and sparc_pmu_add.

Signed-off-by: David Ahern <david.ahern@oracle.com>
Acked-by: Bob Picco <bob.picco@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>