uapi: fix linux/packet_diag.h userspace compilation error

commit 745cb7f8a5de0805cade3de3991b7a95317c7c73 upstream.

Replace MAX_ADDR_LEN with its numeric value to fix the following
linux/packet_diag.h userspace compilation error:

/usr/include/linux/packet_diag.h:67:17: error: 'MAX_ADDR_LEN' undeclared here (not in a function)
  __u8 pdmc_addr[MAX_ADDR_LEN];

This is not the first case in the UAPI where the numeric value
of MAX_ADDR_LEN is used instead of symbolic one, uapi/linux/if_link.h
already does the same:

$ grep MAX_ADDR_LEN include/uapi/linux/if_link.h
__u8 mac[32]; /* MAX_ADDR_LEN */

There are no UAPI headers besides these two that use MAX_ADDR_LEN.

Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Acked-by: Pavel Emelyanov <xemul@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>

tcp: fix various issues for sockets morphing to listen state

commit 02b2faaf0af1d85585f6d6980e286d53612acfc2 upstream.

Dmitry Vyukov reported a divide by 0 triggered by syzkaller, exploiting
tcp_disconnect() path that was never really considered and/or used
before syzkaller ;)

I was not able to reproduce the bug, but it seems issues here are the
three possible actions that assumed they would never trigger on a
listener.

1) tcp_write_timer_handler
2) tcp_delack_timer_handler
3) MTU reduction

Only IPv6 MTU reduction was properly testing TCP_CLOSE and TCP_LISTEN
 states from tcp_v6_mtu_reduced()

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>

dccp: Unlock sock before calling sk_free()

commit d5afb6f9b6bb2c57bd0c05e76e12489dc0d037d9 upstream.

The code where sk_clone() came from created a new socket and locked it,
but then, on the error path didn't unlock it.

This problem stayed there for a long while, till b0691c8ee7c2 ("net:
Unlock sock before calling sk_free()") fixed it, but unfortunately the
callers of sk_clone() (now sk_clone_locked()) were not audited and the
one in dccp_create_openreq_child() remained.

Now in the age of the syskaller fuzzer, this was finally uncovered, as
reported by Dmitry:

 ---- 8< ----

I've got the following report while running syzkaller fuzzer on
86292b33d4b7 ("Merge branch 'akpm' (patches from Andrew)")

  [ BUG: held lock freed! ]
  4.10.0+ #234 Not tainted
  -------------------------
  syz-executor6/6898 is freeing memory
  ffff88006286cac0-ffff88006286d3b7, with a lock still held there!
   (slock-AF_INET6){+.-...}, at: [<ffffffff8362c2c9>] spin_lock
  include/linux/spinlock.h:299 [inline]
   (slock-AF_INET6){+.-...}, at: [<ffffffff8362c2c9>]
  sk_clone_lock+0x3d9/0x12c0 net/core/sock.c:1504
  5 locks held by syz-executor6/6898:
   #0:  (sk_lock-AF_INET6){+.+.+.}, at: [<ffffffff839a34b4>] lock_sock
  include/net/sock.h:1460 [inline]
   #0:  (sk_lock-AF_INET6){+.+.+.}, at: [<ffffffff839a34b4>]
  inet_stream_connect+0x44/0xa0 net/ipv4/af_inet.c:681
   #1:  (rcu_read_lock){......}, at: [<ffffffff83bc1c2a>]
  inet6_csk_xmit+0x12a/0x5d0 net/ipv6/inet6_connection_sock.c:126
   #2:  (rcu_read_lock){......}, at: [<ffffffff8369b424>] __skb_unlink
  include/linux/skbuff.h:1767 [inline]
   #2:  (rcu_read_lock){......}, at: [<ffffffff8369b424>] __skb_dequeue
  include/linux/skbuff.h:1783 [inline]
   #2:  (rcu_read_lock){......}, at: [<ffffffff8369b424>]
  process_backlog+0x264/0x730 net/core/dev.c:4835
   #3:  (rcu_read_lock){......}, at: [<ffffffff83aeb5c0>]
  ip6_input_finish+0x0/0x1700 net/ipv6/ip6_input.c:59
   #4:  (slock-AF_INET6){+.-...}, at: [<ffffffff8362c2c9>] spin_lock
  include/linux/spinlock.h:299 [inline]
   #4:  (slock-AF_INET6){+.-...}, at: [<ffffffff8362c2c9>]
  sk_clone_lock+0x3d9/0x12c0 net/core/sock.c:1504

Fix it just like was done by b0691c8ee7c2 ("net: Unlock sock before calling
sk_free()").

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170301153510.GE15145@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>

net: don't call strlen() on the user buffer in packet_bind_spkt()

commit 540e2894f7905538740aaf122bd8e0548e1c34a4 upstream.

KMSAN (KernelMemorySanitizer, a new error detection tool) reports use of
uninitialized memory in packet_bind_spkt():
Acked-by: Eric Dumazet <edumazet@google.com>
==================================================================
BUG: KMSAN: use of unitialized memory
CPU: 0 PID: 1074 Comm: packet Not tainted 4.8.0-rc6+ #1891
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs
01/01/2011
 0000000000000000 ffff88006b6dfc08 ffffffff82559ae8 ffff88006b6dfb48
 ffffffff818a7c91 ffffffff85b9c870 0000000000000092 ffffffff85b9c550
 0000000000000000 0000000000000092 00000000ec400911 0000000000000002
Call Trace:
 [<     inline     >] __dump_stack lib/dump_stack.c:15
 [<ffffffff82559ae8>] dump_stack+0x238/0x290 lib/dump_stack.c:51
 [<ffffffff818a6626>] kmsan_report+0x276/0x2e0 mm/kmsan/kmsan.c:1003
 [<ffffffff818a783b>] __msan_warning+0x5b/0xb0
mm/kmsan/kmsan_instr.c:424
 [<     inline     >] strlen lib/string.c:484
 [<ffffffff8259b58d>] strlcpy+0x9d/0x200 lib/string.c:144
 [<ffffffff84b2eca4>] packet_bind_spkt+0x144/0x230
net/packet/af_packet.c:3132
 [<ffffffff84242e4d>] SYSC_bind+0x40d/0x5f0 net/socket.c:1370
 [<ffffffff84242a22>] SyS_bind+0x82/0xa0 net/socket.c:1356
 [<ffffffff8515991b>] entry_SYSCALL_64_fastpath+0x13/0x8f
arch/x86/entry/entry_64.o:?
chained origin: 00000000eba00911
 [<ffffffff810bb787>] save_stack_trace+0x27/0x50
arch/x86/kernel/stacktrace.c:67
 [<     inline     >] kmsan_save_stack_with_flags mm/kmsan/kmsan.c:322
 [<     inline     >] kmsan_save_stack mm/kmsan/kmsan.c:334
 [<ffffffff818a59f8>] kmsan_internal_chain_origin+0x118/0x1e0
mm/kmsan/kmsan.c:527
 [<ffffffff818a7773>] __msan_set_alloca_origin4+0xc3/0x130
mm/kmsan/kmsan_instr.c:380
 [<ffffffff84242b69>] SYSC_bind+0x129/0x5f0 net/socket.c:1356
 [<ffffffff84242a22>] SyS_bind+0x82/0xa0 net/socket.c:1356
 [<ffffffff8515991b>] entry_SYSCALL_64_fastpath+0x13/0x8f
arch/x86/entry/entry_64.o:?
origin description: ----address@SYSC_bind (origin=00000000eb400911)
==================================================================
(the line numbers are relative to 4.8-rc6, but the bug persists
upstream)

, when I run the following program as root:

=====================================
 #include <string.h>
 #include <sys/socket.h>
 #include <netpacket/packet.h>
 #include <net/ethernet.h>

 int main() {
   struct sockaddr addr;
   memset(&addr, 0xff, sizeof(addr));
   addr.sa_family = AF_PACKET;
   int fd = socket(PF_PACKET, SOCK_PACKET, htons(ETH_P_ALL));
   bind(fd, &addr, sizeof(addr));
   return 0;
 }
=====================================

This happens because addr.sa_data copied from the userspace is not
zero-terminated, and copying it with strlcpy() in packet_bind_spkt()
results in calling strlen() on the kernel copy of that non-terminated
buffer.

Signed-off-by: Alexander Potapenko <glider@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>

l2tp: avoid use-after-free caused by l2tp_ip_backlog_recv

commit 51fb60eb162ab84c5edf2ae9c63cf0b878e5547e upstream.

l2tp_ip_backlog_recv may not return -1 if the packet gets dropped.
The return value is passed up to ip_local_deliver_finish, which treats
negative values as an IP protocol number for resubmission.

Signed-off-by: Paul Hüber <phueber@kernsp.in>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>

mvsas: fix misleading indentation

commit 7789cd39274c51bf475411fe22a8ee7255082809 upstream.

Fix a smatch warning:
drivers/scsi/mvsas/mv_sas.c:740 mvs_task_prep() warn: curly braces intended?

The code is correct, the indention is misleading. When the device is not
ready we want to return SAS_PHY_DOWN. But current indentation makes it
look like we only do so in the else branch of if (mvi_dev).

Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

cpmac: remove hopeless #warning

commit d43e6fb4ac4abfe4ef7c102833ed02330ad701e0 upstream.

The #warning was present 10 years ago when the driver first got merged.
As the platform is rather obsolete by now, it seems very unlikely that
the warning will cause anyone to fix the code properly.

kernelci.org reports the warning for every build in the meantime, so
I think it's better to just turn it into a code comment to reduce
noise.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>

mtd: pmcmsp: use kstrndup instead of kmalloc+strncpy

commit 906b268477bc03daaa04f739844c120fe4dbc991 upstream.

kernelci.org reports a warning for this driver, as it copies a local
variable into a 'const char *' string:

    drivers/mtd/maps/pmcmsp-flash.c:149:30: warning: passing argument 1 of 'strncpy' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers]

Using kstrndup() simplifies the code and avoids the warning.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

crypto: improve gcc optimization flags for serpent and wp512

commit 7d6e9105026788c497f0ab32fa16c82f4ab5ff61 upstream.

An ancient gcc bug (first reported in 2003) has apparently resurfaced
on MIPS, where kernelci.org reports an overly large stack frame in the
whirlpool hash algorithm:

crypto/wp512.c:987:1: warning: the frame size of 1112 bytes is larger than 1024 bytes [-Wframe-larger-than=]

With some testing in different configurations, I'm seeing large
variations in stack frames size up to 1500 bytes for what should have
around 300 bytes at most. I also checked the reference implementation,
which is essentially the same code but also comes with some test and
benchmarking infrastructure.

It seems that recent compiler versions on at least arm, arm64 and powerpc
have a partial fix for this problem, but enabling "-fsched-pressure", but
even with that fix they suffer from the issue to a certain degree. Some
testing on arm64 shows that the time needed to hash a given amount of
data is roughly proportional to the stack frame size here, which makes
sense given that the wp512 implementation is doing lots of loads for
table lookups, and the problem with the overly large stack is a result
of doing a lot more loads and stores for spilled registers (as seen from
inspecting the object code).

Disabling -fschedule-insns consistently fixes the problem for wp512,
in my collection of cross-compilers, the results are consistently better
or identical when comparing the stack sizes in this function, though
some architectures (notable x86) have schedule-insns disabled by
default.

The four columns are:
default: -O2
press:  -O2 -fsched-pressure
nopress: -O2 -fschedule-insns -fno-sched-pressure
nosched: -O2 -no-schedule-insns (disables sched-pressure)

default press nopress nosched
alpha-linux-gcc-4.9.3 1136 848 1136 176
am33_2.0-linux-gcc-4.9.3 2100 2076 2100 2104
arm-linux-gnueabi-gcc-4.9.3 848 848 1048 352
cris-linux-gcc-4.9.3 272 272 272 272
frv-linux-gcc-4.9.3 1128 1000 1128 280
hppa64-linux-gcc-4.9.3 1128 336 1128 184
hppa-linux-gcc-4.9.3 644 308 644 276
i386-linux-gcc-4.9.3 352 352 352 352
m32r-linux-gcc-4.9.3 720 656 720 268
microblaze-linux-gcc-4.9.3 1108 604 1108 256
mips64-linux-gcc-4.9.3 1328 592 1328 208
mips-linux-gcc-4.9.3 1096 624 1096 240
powerpc64-linux-gcc-4.9.3 1088 432 1088 160
powerpc-linux-gcc-4.9.3 1080 584 1080 224
s390-linux-gcc-4.9.3 456 456 624 360
sh3-linux-gcc-4.9.3 292 292 292 292
sparc64-linux-gcc-4.9.3 992 240 992 208
sparc-linux-gcc-4.9.3 680 592 680 312
x86_64-linux-gcc-4.9.3 224 240 272 224
xtensa-linux-gcc-4.9.3 1152 704 1152 304

aarch64-linux-gcc-7.0.0 224 224 1104 208
arm-linux-gnueabi-gcc-7.0.1 824 824 1048 352
mips-linux-gcc-7.0.0 1120 648 1120 272
x86_64-linux-gcc-7.0.1 240 240 304 240

arm-linux-gnueabi-gcc-4.4.7 840 392
arm-linux-gnueabi-gcc-4.5.4 784 728 784 320
arm-linux-gnueabi-gcc-4.6.4 736 728 736 304
arm-linux-gnueabi-gcc-4.7.4 944 784 944 352
arm-linux-gnueabi-gcc-4.8.5 464 464 760 352
arm-linux-gnueabi-gcc-4.9.3 848 848 1048 352
arm-linux-gnueabi-gcc-5.3.1 824 824 1064 336
arm-linux-gnueabi-gcc-6.1.1 808 808 1056 344
arm-linux-gnueabi-gcc-7.0.1 824 824 1048 352

Trying the same test for serpent-generic, the picture is a bit different,
and while -fno-schedule-insns is generally better here than the default,
-fsched-pressure wins overall, so I picked that instead.

default press nopress nosched
alpha-linux-gcc-4.9.3 1392 864 1392 960
am33_2.0-linux-gcc-4.9.3 536 524 536 528
arm-linux-gnueabi-gcc-4.9.3 552 552 776 536
cris-linux-gcc-4.9.3 528 528 528 528
frv-linux-gcc-4.9.3 536 400 536 504
hppa64-linux-gcc-4.9.3 524 208 524 480
hppa-linux-gcc-4.9.3 768 472 768 508
i386-linux-gcc-4.9.3 564 564 564 564
m32r-linux-gcc-4.9.3 712 576 712 532
microblaze-linux-gcc-4.9.3 724 392 724 512
mips64-linux-gcc-4.9.3 720 384 720 496
mips-linux-gcc-4.9.3 728 384 728 496
powerpc64-linux-gcc-4.9.3 704 304 704 480
powerpc-linux-gcc-4.9.3 704 296 704 480
s390-linux-gcc-4.9.3 560 560 592 536
sh3-linux-gcc-4.9.3 540 540 540 540
sparc64-linux-gcc-4.9.3 544 352 544 496
sparc-linux-gcc-4.9.3 544 344 544 496
x86_64-linux-gcc-4.9.3 528 536 576 528
xtensa-linux-gcc-4.9.3 752 544 752 544

aarch64-linux-gcc-7.0.0 432 432 656 480
arm-linux-gnueabi-gcc-7.0.1 616 616 808 536
mips-linux-gcc-7.0.0 720 464 720 488
x86_64-linux-gcc-7.0.1 536 528 600 536

arm-linux-gnueabi-gcc-4.4.7 592 440
arm-linux-gnueabi-gcc-4.5.4 776 448 776 544
arm-linux-gnueabi-gcc-4.6.4 776 448 776 544
arm-linux-gnueabi-gcc-4.7.4 768 448 768 544
arm-linux-gnueabi-gcc-4.8.5 488 488 776 544
arm-linux-gnueabi-gcc-4.9.3 552 552 776 536
arm-linux-gnueabi-gcc-5.3.1 552 552 776 536
arm-linux-gnueabi-gcc-6.1.1 560 560 776 536
arm-linux-gnueabi-gcc-7.0.1 616 616 808 536

I did not do any runtime tests with serpent, so it is possible that stack
frame size does not directly correlate with runtime performance here and
it actually makes things worse, but it's more likely to help here, and
the reduced stack frame size is probably enough reason to apply the patch,
especially given that the crypto code is often used in deep call chains.

Link: https://kernelci.org/build/id/58797d7559b5149efdf6c3a9/logs/
Link: http://www.larc.usp.br/~pbarreto/WhirlpoolPage.html
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=11488
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=79149
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Willy Tarreau <w@1wt.eu>

xhci: fix 10 second timeout on removal of PCI hotpluggable xhci controllers

commit 98d74f9ceaefc2b6c4a6440050163a83be0abede upstream.

PCI hotpluggable xhci controllers such as some Alpine Ridge solutions will
remove the xhci controller from the PCI bus when the last USB device is
disconnected.

Add a flag to indicate that the host is being removed to avoid queueing
configure_endpoint commands for the dropped endpoints.
For PCI hotplugged controllers this will prevent 5 second command timeouts
For static xhci controllers the configure_endpoint command is not needed
in the removal case as everything will be returned, freed, and the
controller is reset.

For now the flag is only set for PCI connected host controllers.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

drivers: hv: Turn off write permission on the hypercall page

commit 372b1e91343e657a7cc5e2e2bcecd5140ac28119 upstream.

The hypercall page only needs to be executable but currently it is setup to
be writable as well. Fix the issue.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Acked-by: Kees Cook <keescook@chromium.org>
Reported-by: Stephen Hemminger <stephen@networkplumber.org>
Tested-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Willy Tarreau <w@1wt.eu>

fat: fix using uninitialized fields of fat_inode/fsinfo_inode

commit c0d0e351285161a515396b7b1ee53ec9ffd97e3c upstream.

Recently fallocate patch was merged and it uses
MSDOS_I(inode)->mmu_private at fat_evict_inode().  However,
fat_inode/fsinfo_inode that was introduced in past didn't initialize
MSDOS_I(inode) properly.

With those combinations, it became the cause of accessing random entry
in FAT area.

Link: http://lkml.kernel.org/r/87pohrj4i8.fsf@mail.parknet.co.jp
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Reported-by: Moreno Bartalucci <moreno.bartalucci@tecnorama.it>
Tested-by: Moreno Bartalucci <moreno.bartalucci@tecnorama.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

drm/ttm: Make sure BOs being swapped out are cacheable

commit 239ac65fa5ffab71adf66e642750f940e7241d99 upstream.

The current caching state may not be tt_cached, even though the
placement contains TTM_PL_FLAG_CACHED, because placement can contain
multiple caching flags. Trying to swap out such a BO would trip up the

BUG_ON(ttm->caching_state != tt_cached);

in ttm_tt_swapout.

Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Christian König <christian.koenig@amd.com>.
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

drm/ast: Fix test for VGA enabled

commit 905f21a49d388de3e99438235f3301cabf0c0ef4 upstream.

The test to see if VGA was already enabled is doing an unnecessary
second test from a register that may or may not have been initialized
to a valid value. Remove it.

Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Joel Stanley <joel@jms.id.au>
Tested-by: Y.C. Chen <yc_chen@aspeedtech.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

mac80211: flush delayed work when entering suspend

commit a9e9200d8661c1a0be8c39f93deb383dc940de35 upstream.

The issue was found when entering suspend and resume.
It triggers a warning in:
mac80211/key.c: ieee80211_enable_keys()
...
WARN_ON_ONCE(sdata->crypto_tx_tailroom_needed_cnt ||
             sdata->crypto_tx_tailroom_pending_dec);
...

It points out sdata->crypto_tx_tailroom_pending_dec isn't cleaned up successfully
in a delayed_work during suspend. Add a flush_delayed_work to fix it.

Signed-off-by: Matt Chen <matt.chen@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

xtensa: move parse_tag_fdt out of #ifdef CONFIG_BLK_DEV_INITRD

commit 4ab18701c66552944188dbcd0ce0012729baab84 upstream.

FDT tag parsing is not related to whether BLK_DEV_INITRD is configured
or not, move it out of the corresponding #ifdef/#endif block.
This fixes passing external FDT to the kernel configured w/o
BLK_DEV_INITRD support.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

s390: TASK_SIZE for kernel threads

commit fb94a687d96c570d46332a4a890f1dcb7310e643 upstream.

Return a sensible value if TASK_SIZE if called from a kernel thread.

This gets us around an issue with copy_mount_options that does a magic
size calculation "TASK_SIZE - (unsigned long)data" while in a kernel
thread and data pointing to kernel space.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

KVM: s390: fix task size check

The gmap_map_segment function uses PGDIR_SIZE in the check for the
maximum address in the tasks address space. This incorrectly limits
the amount of memory usable for a kvm guest to 4TB. The correct limit
is (1UL << 53). As the TASK_SIZE has different values (4TB vs 8PB)
dependent on the existance of the fourth page table level, create
a new define 'TASK_MAX_SIZE' for (1UL << 53).

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

KVM: PPC: Book3S PR: Fix illegal opcode emulation

commit 708e75a3ee750dce1072134e630d66c4e6eaf63c upstream.

If kvmppc_handle_exit_pr() calls kvmppc_emulate_instruction() to emulate
one instruction (in the BOOK3S_INTERRUPT_H_EMUL_ASSIST case), it calls
kvmppc_core_queue_program() afterwards if kvmppc_emulate_instruction()
returned EMULATE_FAIL, so the guest gets an program interrupt for the
illegal opcode.
However, the kvmppc_emulate_instruction() also tried to inject a
program exception for this already, so the program interrupt gets
injected twice and the return address in srr0 gets destroyed.
All other callers of kvmppc_emulate_instruction() are also injecting
a program interrupt, and since the callers have the right knowledge
about the srr1 flags that should be used, it is the function
kvmppc_emulate_instruction() that should _not_ inject program
interrupts, so remove the kvmppc_core_queue_program() here.

This fixes the issue discovered by Laurent Vivier with kvm-unit-tests
where the logs are filled with these messages when the test tries
to execute an illegal instruction:

     Couldn't emulate instruction 0x00000000 (op 0 xop 0)
     kvmppc_handle_exit_pr: emulation at 700 failed (00000000)

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Willy Tarreau <w@1wt.eu>

KVM: VMX: use correct vmcs_read/write for guest segment selector/base

commit 96794e4ed4d758272c486e1529e431efb7045265 upstream.

Guest segment selector is 16 bit field and guest segment base is natural
width field. Fix two incorrect invocations accordingly.

Without this patch, build fails when aggressive inlining is used with ICC.

[js] no vmx_dump_sel in 3.12

Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Willy Tarreau <w@1wt.eu>

powerpc/xmon: Fix data-breakpoint

commit c21a493a2b44650707d06741601894329486f2ad upstream.

Currently xmon data-breakpoint feature is broken.

Whenever there is a watchpoint match occurs, hw_breakpoint_handler will
be called by do_break via notifier chains mechanism. If watchpoint is
registered by xmon, hw_breakpoint_handler won't find any associated
perf_event and returns immediately with NOTIFY_STOP. Similarly, do_break
also returns without notifying to xmon.

Solve this by returning NOTIFY_DONE when hw_breakpoint_handler does not
find any perf_event associated with matched watchpoint, rather than
NOTIFY_STOP, which tells the core code to continue calling the other
breakpoint handlers including the xmon one.

Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Willy Tarreau <w@1wt.eu>

bcma: use (get|put)_device when probing/removing device driver

commit a971df0b9d04674e325346c17de9a895425ca5e1 upstream.

This allows tracking device state and e.g. makes devm work as expected.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

NFSv4: fix getacl ERANGE for some ACL buffer sizes

commit ed92d8c137b7794c2c2aa14479298b9885967607 upstream.

We're not taking into account that the space needed for the (variable
length) attr bitmap, with the result that we'd sometimes get a spurious
ERANGE when the ACL data got close to the end of a page.

Just add in an extra page to make sure.

Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

rdma_cm: fail iwarp accepts w/o connection params

commit f2625f7db4dd0bbd16a9c7d2950e7621f9aa57ad upstream.

cma_accept_iw() needs to return an error if conn_params is NULL.
Since this is coming from user space, we can crash.

Reported-by: Shaobo He <shaobo@cs.utah.edu>
Acked-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

ath5k: drop bogus warning on drv_set_key with unsupported cipher

commit a70e1d6fd6b5e1a81fa6171600942bee34f5128f upstream.

Simply return -EOPNOTSUPP instead.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

samples/seccomp: fix 64-bit comparison macros

commit 916cafdc95843fb9af5fd5f83ca499d75473d107 upstream.

There were some bugs in the JNE64 and JLT64 comparision macros. This fixes
them, improves comments, and cleans up the file while we are at it.

Reported-by: Stephen Röttger <sroettger@google.com>
Signed-off-by: Mathias Svensson <idolf@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

sd: get disk reference in sd_check_events()

commit eb72d0bb84eee5d0dc3044fd17b75e7101dabb57 upstream.

sd_check_events() is called asynchronously, and might race
with device removal. So always take a disk reference when
processing the event to avoid the device being removed while
the event is processed.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Jinpu Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Willy Tarreau <w@1wt.eu>

ipc/shm: Fix shmat mmap nil-page protection

commit 95e91b831f87ac8e1f8ed50c14d709089b4e01b8 upstream.

The issue is described here, with a nice testcase:

    https://bugzilla.kernel.org/show_bug.cgi?id=192931

The problem is that shmat() calls do_mmap_pgoff() with MAP_FIXED, and
the address rounded down to 0.  For the regular mmap case, the
protection mentioned above is that the kernel gets to generate the
address -- arch_get_unmapped_area() will always check for MAP_FIXED and
return that address.  So by the time we do security_mmap_addr(0) things
get funky for shmat().

The testcase itself shows that while a regular user crashes, root will
not have a problem attaching a nil-page.  There are two possible fixes
to this.  The first, and which this patch does, is to simply allow root
to crash as well -- this is also regular mmap behavior, ie when hacking
up the testcase and adding mmap(...  |MAP_FIXED).  While this approach
is the safer option, the second alternative is to ignore SHM_RND if the
rounded address is 0, thus only having MAP_SHARED flags.  This makes the
behavior of shmat() identical to the mmap() case.  The downside of this
is obviously user visible, but does make sense in that it maintains
semantics after the round-down wrt 0 address and mmap.

Passes shm related ltp tests.

Link: http://lkml.kernel.org/r/1486050195-18629-1-git-send-email-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Reported-by: Gareth Evans <gareth.evans@contextis.co.uk>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

mm: vmpressure: fix sending wrong events on underflow

commit e1587a4945408faa58d0485002c110eb2454740c upstream.

At the end of a window period, if the reclaimed pages is greater than
scanned, an unsigned underflow can result in a huge pressure value and
thus a critical event.  Reclaimed pages is found to go higher than
scanned because of the addition of reclaimed slab pages to reclaimed in
shrink_node without a corresponding increment to scanned pages.

Minchan Kim mentioned that this can also happen in the case of a THP
page where the scanned is 1 and reclaimed could be 512.

Link: http://lkml.kernel.org/r/1486641577-11685-1-git-send-email-vinmenon@codeaurora.org
Signed-off-by: Vinayak Menon <vinmenon@codeaurora.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Anton Vorontsov <anton.vorontsov@linaro.org>
Cc: Shiraz Hashim <shashim@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

MIPS: Fix special case in 64 bit IP checksumming.

commit 66fd848cadaa6be974a8c780fbeb328f0af4d3bd upstream.

For certain arguments such as saddr = 0xc0a8fd60, daddr = 0xc0a8fda1,
len = 80, proto = 17, sum = 0x7eae049d there will be a carry when
folding the intermediate 64 bit checksum to 32 bit but the code doesn't
add the carry back to the one's complement sum, thus an incorrect result
will be generated.

Reported-by: Mark Zhang <bomb.zhang@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

af_packet: remove a stray tab in packet_set_ring()

commit d7cf0c34af067555737193b6c1aa7abaa677f29c upstream.

At first glance it looks like there is a missing curly brace but
actually the code works the same either way.  I have adjusted the
indenting but left the code the same.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>

rtlwifi: rtl_usb: Fix for URB leaking when doing ifconfig up/down

commit 575ddce0507789bf9830d089557d2199d2f91865 upstream.

In the function rtl_usb_start we pre-allocate a certain number of urbs
for RX path but they will not be freed when calling rtl_usb_stop. This
results in leaking urbs when doing ifconfig up and down. Eventually,
the system has no available urbs.

Signed-off-by: Michael Schenk <michael.schenk@albis-elcon.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

tty: serial: msm: Fix module autoload

commit abe81f3b8ed2996e1712d26d38ff6b73f582c616 upstream.

If the driver is built as a module, autoload won't work because the module
alias information is not filled. So user-space can't match the registered
device with the corresponding module.

Export the module alias information using the MODULE_DEVICE_TABLE() macro.

Before this patch:

$ modinfo drivers/tty/serial/msm_serial.ko | grep alias
$

After this patch:

$ modinfo drivers/tty/serial/msm_serial.ko | grep alias
alias:          of:N*T*Cqcom,msm-uartdmC*
alias:          of:N*T*Cqcom,msm-uartdm
alias:          of:N*T*Cqcom,msm-uartC*
alias:          of:N*T*Cqcom,msm-uart

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Willy Tarreau <w@1wt.eu>

irda: Fix lockdep annotations in hashbin_delete().

commit 4c03b862b12f980456f9de92db6d508a4999b788 upstream.

A nested lock depth was added to the hasbin_delete() code but it
doesn't actually work some well and results in tons of lockdep splats.

Fix the code instead to properly drop the lock around the operation
and just keep peeking the head of the hashbin queue.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>

rtc: interface: ignore expired timers when enqueuing new timers

commit 2b2f5ff00f63847d95adad6289bd8b05f5983dd5 upstream.

This patch fixes a RTC wakealarm issue, namely, the event fires during
hibernate and is not cleared from the list, causing hwclock to block.

The current enqueuing does not trigger an alarm if any expired timers
already exist on the timerqueue. This can occur when a RTC wake alarm
is used to wake a machine out of hibernate and the resumed state has
old expired timers that have not been removed from the timer queue.
This fix skips over any expired timers and triggers an alarm if there
are no pending timers on the timerqueue. Note that the skipped expired
timer will get reaped later on, so there is no need to clean it up
immediately.

The issue can be reproduced by putting a machine into hibernate and
waking it with the RTC wakealarm.  Running the example RTC test program
from tools/testing/selftests/timers/rtctest.c after the hibernate will
block indefinitely.  With the fix, it no longer blocks after the
hibernate resume.

BugLink: http://bugs.launchpad.net/bugs/1333569
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Willy Tarreau <w@1wt.eu>

futex: Move futex_init() to core_initcall

commit 25f71d1c3e98ef0e52371746220d66458eac75bc upstream.

The UEVENT user mode helper is enabled before the initcalls are executed
and is available when the root filesystem has been mounted.

The user mode helper is triggered by device init calls and the executable
might use the futex syscall.

futex_init() is marked __initcall which maps to device_initcall, but there
is no guarantee that futex_init() is invoked _before_ the first device init
call which triggers the UEVENT user mode helper.

If the user mode helper uses the futex syscall before futex_init() then the
syscall crashes with a NULL pointer dereference because the futex subsystem
has not been initialized yet.

Move futex_init() to core_initcall so futexes are initialized before the
root filesystem is mounted and the usermode helper becomes available.

[ tglx: Rewrote changelog ]

Signed-off-by: Yang Yang <yang.yang29@zte.com.cn>
Cc: jiang.biao2@zte.com.cn
Cc: jiang.zhengxiong@zte.com.cn
Cc: zhong.weidong@zte.com.cn
Cc: deng.huali@zte.com.cn
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1483085875-6130-1-git-send-email-yang.yang29@zte.com.cn
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Willy Tarreau <w@1wt.eu>

siano: make it work again with CONFIG_VMAP_STACK

commit f9c85ee67164b37f9296eab3b754e543e4e96a1c upstream.

Reported as a Kaffeine bug:
https://bugs.kde.org/show_bug.cgi?id=375811

The USB control messages require DMA to work. We cannot pass
a stack-allocated buffer, as it is not warranted that the
stack would be into a DMA enabled area.

On Kernel 4.9, the default is to not accept DMA on stack anymore
on x86 architecture. On other architectures, this has been a
requirement since Kernel 2.2. So, after this patch, this driver
should likely work fine on all archs.

Tested with USB ID 2040:5510: Hauppauge Windham

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

vfs: fix uninitialized flags in splice_to_pipe()

commit 5a81e6a171cdbd1fa8bc1fdd80c23d3d71816fac upstream.

Flags (PIPE_BUF_FLAG_PACKET, PIPE_BUF_FLAG_GIFT) could remain on the
unused part of the pipe ring buffer.  Previously splice_to_pipe() left
the flags value alone, which could result in incorrect behavior.

Uninitialized flags appears to have been there from the introduction of
the splice syscall.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

packet: round up linear to header len

commit 57031eb794906eea4e1c7b31dc1e2429c0af0c66 upstream.

Link layer protocols may unconditionally pull headers, as Ethernet
does in eth_type_trans. Ensure that the entire link layer header
always lies in the skb linear segment. tpacket_snd has such a check.
Extend this to packet_snd.

Variable length link layer headers complicate the computation
somewhat. Here skb->len may be smaller than dev->hard_header_len.

Round up the linear length to be at least as long as the smallest of
the two.

[js] no virtio helpers in 3.12

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Willy Tarreau <w@1wt.eu>

macvtap: read vnet_hdr_size once

commit 837585a5375c38d40361cfe64e6fd11e1addb936 upstream.

When IFF_VNET_HDR is enabled, a virtio_net header must precede data.
Data length is verified to be greater than or equal to expected header
length tun->vnet_hdr_sz before copying.

Macvtap functions read the value once, but unless READ_ONCE is used,
the compiler may ignore this and read multiple times. Enforce a single
read and locally cached value to avoid updates between test and use.

Signed-off-by: Willem de Bruijn <willemb@google.com>
Suggested-by: Eric Dumazet <edumazet@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[wt: s/READ_ONCE/ACCESS_ONCE]

Signed-off-by: Willy Tarreau <w@1wt.eu>

tcp: fix 0 divide in __tcp_select_window()

commit 06425c308b92eaf60767bc71d359f4cbc7a561f8 upstream.

syszkaller fuzzer was able to trigger a divide by zero, when
TCP window scaling is not enabled.

SO_RCVBUF can be used not only to increase sk_rcvbuf, also
to decrease it below current receive buffers utilization.

If mss is negative or 0, just return a zero TCP window.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>

sched/debug: Don't dump sched debug info in SysRq-W

commit fb90a6e93c0684ab2629a42462400603aa829b9c upstream.

sysrq_sched_debug_show() can dump a lot of information.  Don't print out
all that if we're just trying to get a list of blocked tasks (SysRq-W).
The information is still accessible with SysRq-T.

Signed-off-by: Rabin Vincent <rabinv@axis.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1459777322-30902-1-git-send-email-rabin.vincent@axis.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Nikolay Borisov <n.borisov.lkml@gmail.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Willy Tarreau <w@1wt.eu>

ARC: [arcompact] brown paper bag bug in unaligned access delay slot fixup

commit a524c218bc94c705886a0e0fedeee45d1931da32 upstream.

Reported-by: Jo-Philipp Wich <jo@mein.io>
Fixes: 9aed02feae57bf7 ("ARC: [arcompact] handle unaligned access delay slot")
Cc: linux-kernel@vger.kernel.org
Cc: linux-snps-arc@lists.infradead.org
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

mm, fs: check for fatal signals in do_generic_file_read()

commit 5abf186a30a89d5b9c18a6bf93a2c192c9fd52f6 upstream.

do_generic_file_read() can be told to perform a large request from
userspace.  If the system is under OOM and the reading task is the OOM
victim then it has an access to memory reserves and finishing the full
request can lead to the full memory depletion which is dangerous.  Make
sure we rather go with a short read and allow the killed task to
terminate.

Link: http://lkml.kernel.org/r/20170201092706.9966-3-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

mm/memory_hotplug.c: check start_pfn in test_pages_in_a_zone()

commit deb88a2a19e85842d79ba96b05031739ec327ff4 upstream.

Patch series "fix a kernel oops when reading sysfs valid_zones", v2.

A sysfs memory file is created for each 2GiB memory block on x86-64 when
the system has 64GiB or more memory.  [1] When the start address of a
memory block is not backed by struct page, i.e.  a memory range is not
aligned by 2GiB, reading its 'valid_zones' attribute file leads to a
kernel oops.  This issue was observed on multiple x86-64 systems with
more than 64GiB of memory.  This patch-set fixes this issue.

Patch 1 first fixes an issue in test_pages_in_a_zone(), which does not
test the start section.

Patch 2 then fixes the kernel oops by extending test_pages_in_a_zone()
to return valid [start, end).

Note for stable kernels: The memory block size change was made by commit
bdee237c0343 ("x86: mm: Use 2GB memory block size on large-memory x86-64
systems"), which was accepted to 3.9.  However, this patch-set depends
on (and fixes) the change to test_pages_in_a_zone() made by commit
5f0f2887f4de ("mm/memory_hotplug.c: check for missing sections in
test_pages_in_a_zone()"), which was accepted to 4.4.

So, I recommend that we backport it up to 4.4.

[1] 'Commit bdee237c0343 ("x86: mm: Use 2GB memory block size on
    large-memory x86-64 systems")'

This patch (of 2):

test_pages_in_a_zone() does not check 'start_pfn' when it is aligned by
section since 'sec_end_pfn' is set equal to 'pfn'.  Since this function
is called for testing the range of a sysfs memory file, 'start_pfn' is
always aligned by section.

Fix it by properly setting 'sec_end_pfn' to the next section pfn.

Also make sure that this function returns 1 only when the range belongs
to a zone.

Link: http://lkml.kernel.org/r/20170127222149.30893-2-toshi.kani@hpe.com
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Andrew Banman <abanman@sgi.com>
Cc: Reza Arbab <arbab@linux.vnet.ibm.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

ata: sata_mv:- Handle return value of devm_ioremap.

commit 064c3db9c564cc5be514ac21fb4aa26cc33db746 upstream.

Here, If devm_ioremap will fail. It will return NULL.
Then hpriv->base = NULL - 0x20000; Kernel can run into
a NULL-pointer dereference. This error check will avoid
NULL pointer dereference.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Willy Tarreau <w@1wt.eu>

crypto: api - Clear CRYPTO_ALG_DEAD bit before registering an alg

commit d6040764adcb5cb6de1489422411d701c158bb69 upstream.

Make sure CRYPTO_ALG_DEAD bit is cleared before proceeding with
the algorithm registration. This fixes qat-dh registration when
driver is restarted

Signed-off-by: Salvatore Benedetto <salvatore.benedetto@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Willy Tarreau <w@1wt.eu>

drm/nouveau/nv1a,nv1f/disp: fix memory clock rate retrieval

commit 24bf7ae359b8cca165bb30742d2b1c03a1eb23af upstream.

Based on the xf86-video-nv code, NFORCE (NV1A) and NFORCE2 (NV1F) have a
different way of retrieving clocks. See the
nv_hw.c:nForceUpdateArbitrationSettings function in the original code
for how these clocks were accessed.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54587
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

af_unix: move unix_mknod() out of bindlock

commit 0fb44559ffd67de8517098b81f675fa0210f13f0 upstream.

Dmitry reported a deadlock scenario:

unix_bind() path:
u->bindlock ==> sb_writer

do_splice() path:
sb_writer ==> pipe->mutex ==> u->bindlock

In the unix_bind() code path, unix_mknod() does not have to
be done with u->bindlock held, since it is a pure fs operation,
so we can just move unix_mknod() out.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Rainer Weikusat <rweikusat@mobileactivedefense.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>

ipv6: addrconf: Avoid addrconf_disable_change() using RCU read-side lock

commit 03e4deff4987f79c34112c5ba4eb195d4f9382b0 upstream.

Just like commit 4acd4945cd1e ("ipv6: addrconf: Avoid calling
netdevice notifiers with RCU read-side lock"), it is unnecessary
to make addrconf_disable_change() use RCU iteration over the
netdev list, since it already holds the RTNL lock, or we may meet
Illegal context switch in RCU read-side critical section.

Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>

nfs: Don't increment lock sequence ID after NFS4ERR_MOVED

commit 059aa734824165507c65fd30a55ff000afd14983 upstream.

Xuan Qi reports that the Linux NFSv4 client failed to lock a file
that was migrated. The steps he observed on the wire:

1. The client sent a LOCK request to the source server
2. The source server replied NFS4ERR_MOVED
3. The client switched to the destination server
4. The client sent the same LOCK request to the destination
   server with a bumped lock sequence ID
5. The destination server rejected the LOCK request with
   NFS4ERR_BAD_SEQID

RFC 3530 section 8.1.5 provides a list of NFS errors which do not
bump a lock sequence ID.

However, RFC 3530 is now obsoleted by RFC 7530. In RFC 7530 section
9.1.7, this list has been updated by the addition of NFS4ERR_MOVED.

Reported-by: Xuan Qi <xuan.qi@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

parisc: Don't use BITS_PER_LONG in userspace-exported swab.h header

commit 2ad5d52d42810bed95100a3d912679d8864421ec upstream.

In swab.h the "#if BITS_PER_LONG > 32" breaks compiling userspace programs if
BITS_PER_LONG is #defined by userspace with the sizeof() compiler builtin.

Solve this problem by using __BITS_PER_LONG instead.  Since we now
#include asm/bitsperlong.h avoid further potential userspace pollution
by moving the #define of SHIFT_PER_LONG to bitops.h which is not
exported to userspace.

This patch unbreaks compiling qemu on hppa/parisc.

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Willy Tarreau <w@1wt.eu>

ARC: [arcompact] handle unaligned access delay slot corner case

commit 9aed02feae57bf7a40cb04ea0e3017cb7a998db4 upstream.

After emulating an unaligned access in delay slot of a branch, we
pretend as the delay slot never happened - so return back to actual
branch target (or next PC if branch was not taken).

Curently we did this by handling STATUS32.DE, we also need to clear the
BTA.T bit, which is disregarded when returning from original misaligned
exception, but could cause weirdness if it took the interrupt return
path (in case interrupt was acive too)

One ARC700 customer ran into this when enabling unaligned access fixup
for kernel mode accesses as well

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

ISDN: eicon: silence misleading array-bounds warning

commit 950eabbd6ddedc1b08350b9169a6a51b130ebaaf upstream.

With some gcc versions, we get a warning about the eicon driver,
and that currently shows up as the only remaining warning in one
of the build bots:

In file included from ../drivers/isdn/hardware/eicon/message.c:30:0:
eicon/message.c: In function 'mixer_notify_update':
eicon/platform.h:333:18: warning: array subscript is above array bounds [-Warray-bounds]

The code is easily changed to open-code the unusual PUT_WORD() line
causing this to avoid the warning.

Link: http://arm-soc.lixom.net/buildlogs/stable-rc/v4.4.45/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>

sysctl: fix proc_doulongvec_ms_jiffies_minmax()

commit ff9f8a7cf935468a94d9927c68b00daae701667e upstream.

We perform the conversion between kernel jiffies and ms only when
exporting kernel value to user space.

We need to do the opposite operation when value is written by user.

Only matters when HZ != 1000

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

tile/ptrace: Preserve previous registers for short regset write

commit fd7c99142d77dc4a851879a66715abf12a3193fb upstream.

Ensure that if userspace supplies insufficient data to
PTRACE_SETREGSET to fill all the registers, the thread's old
registers are preserved.

Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Chris Metcalf <cmetcalf@mellanox.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

bnx2x: Correct ringparam estimate when DOWN

commit 65870fa77fd7f83d7be4ed924d47ed9e3831f434 upstream.

Until interface is up [and assuming ringparams weren't explicitly
configured] when queried for the size of its rings bnx2x would
claim they're the maximal size by default.
That is incorrect as by default the maximal number of buffers would
be equally divided between the various rx rings.

This prevents the user from actually setting the number of elements
on each rx ring to be of maximal size prior to transitioning the
interface into up state.

To fix this, make a rough estimation about the number of buffers.
It wouldn't always be accurate, but it would be much better than
current estimation and would allow users to increase number of
buffers during early initialization of the interface.

Reported-by: Seymour, Shane <shane.seymour@hpe.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>

serial: 8250_pci: Detach low-level driver during PCI error recovery

commit f209fa03fc9d131b3108c2e4936181eabab87416 upstream.

During a PCI error recovery, like the ones provoked by EEH in the ppc64
platform, all IO to the device must be blocked while the recovery is
completed.  Current 8250_pci implementation only suspends the port
instead of detaching it, which doesn't prevent incoming accesses like
TIOCMGET and TIOCMSET calls from reaching the device.  Those end up
racing with the EEH recovery, crashing it.  Similar races were also
observed when opening the device and when shutting it down during
recovery.

This patch implements a more robust IO blockage for the 8250_pci
recovery by unregistering the port at the beginning of the procedure and
re-adding it afterwards.  Since the port is detached from the uart
layer, we can be sure that no request will make through to the device
during recovery.  This is similar to the solution used by the JSM serial
driver.

I thank Peter Hurley <peter@hurleysoftware.com> for valuable input on
this one over one year ago.

Signed-off-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

move the call of __d_drop(anon) into __d_materialise_unique(dentry, anon)

commit 6f18493e541c690169c3b1479d47d95f624161cf upstream.

and lock the right list there

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Willy Tarreau <w@1wt.eu>

sg: Fix double-free when drives detach during SG_IO

commit f3951a3709ff50990bf3e188c27d346792103432 upstream.

In sg_common_write(), we free the block request and return -ENODEV if
the device is detached in the middle of the SG_IO ioctl().

Unfortunately, sg_finish_rem_req() also tries to free srp->rq, so we
end up freeing rq->cmd in the already free rq object, and then free
the object itself out from under the current user.

This ends up corrupting random memory via the list_head on the rq
object. The most common crash trace I saw is this:

  ------------[ cut here ]------------
  kernel BUG at block/blk-core.c:1420!
  Call Trace:
  [<ffffffff81281eab>] blk_put_request+0x5b/0x80
  [<ffffffffa0069e5b>] sg_finish_rem_req+0x6b/0x120 [sg]
  [<ffffffffa006bcb9>] sg_common_write.isra.14+0x459/0x5a0 [sg]
  [<ffffffff8125b328>] ? selinux_file_alloc_security+0x48/0x70
  [<ffffffffa006bf95>] sg_new_write.isra.17+0x195/0x2d0 [sg]
  [<ffffffffa006cef4>] sg_ioctl+0x644/0xdb0 [sg]
  [<ffffffff81170f80>] do_vfs_ioctl+0x90/0x520
  [<ffffffff81258967>] ? file_has_perm+0x97/0xb0
  [<ffffffff811714a1>] SyS_ioctl+0x91/0xb0
  [<ffffffff81602afb>] tracesys+0xdd/0xe2
    RIP [<ffffffff81281e04>] __blk_put_request+0x154/0x1a0

The solution is straightforward: just set srp->rq to NULL in the
failure branch so that sg_finish_rem_req() doesn't attempt to re-free
it.

Additionally, since sg_rq_end_io() will never be called on the object
when this happens, we need to free memory backing ->cmd if it isn't
embedded in the object itself.

KASAN was extremely helpful in finding the root cause of this bug.

Signed-off-by: Calvin Owens <calvinowens@fb.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Willy Tarreau <w@1wt.eu>

bna: Add synchronization for tx ring.

commit d667f78514c656a6a8bf0b3d6134a7fe5cd4d317 upstream.

We received two reports of BUG_ON in bnad_txcmpl_process() where
hw_consumer_index appeared to be ahead of producer_index. Out of order
write/read of these variables could explain these reports.

bnad_start_xmit(), as a producer of tx descriptors, has a few memory
barriers sprinkled around writes to producer_index and the device's
doorbell but they're not paired with anything in bnad_txcmpl_process(), a
consumer.

Since we are synchronizing with a device, we must use mandatory barriers,
not smp_*. Also, I didn't see the purpose of the last smp_mb() in
bnad_start_xmit().

Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>

vfio/pci: Fix integer overflows, bitmask check

commit 05692d7005a364add85c6e25a6c4447ce08f913a upstream.

The VFIO_DEVICE_SET_IRQS ioctl did not sufficiently sanitize
user-supplied integers, potentially allowing memory corruption. This
patch adds appropriate integer overflow checks, checks the range bounds
for VFIO_IRQ_SET_DATA_NONE, and also verifies that only single element
in the VFIO_IRQ_SET_DATA_TYPE_MASK bitmask is set.
VFIO_IRQ_SET_ACTION_TYPE_MASK is already correctly checked later in
vfio_pci_set_irqs_ioctl().

Furthermore, a kzalloc is changed to a kcalloc because the use of a
kzalloc with an integer multiplication allowed an integer overflow
condition to be reached without this patch. kcalloc checks for overflow
and should prevent a similar occurrence.

Signed-off-by: Vlad Tsyrklevich <vlad@tsyrklevich.net>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

apparmor: do not expose kernel stack

commit f4ee2def2d70692ccff0d55353df4ee594fd0017 upstream.

Do not copy uninitalized fields th.td_hilen, th.td_data.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Willy Tarreau <w@1wt.eu>

apparmor: fix module parameters can be changed after policy is locked

commit 58acf9d911c8831156634a44d0b022d683e1e50c upstream.

the policy_lock parameter is a one way switch that prevents policy
from being further modified. Unfortunately some of the module parameters
can effectively modify policy by turning off enforcement.

split policy_admin_capable into a view check and a full admin check,
and update the admin check to test the policy_lock parameter.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

apparmor: fix oops in profile_unpack() when policy_db is not present

commit 5f20fdfed16bc599a325a145bf0123a8e1c9beea upstream.

BugLink: http://bugs.launchpad.net/bugs/1592547
If unpack_dfa() returns NULL due to the dfa not being present,
profile_unpack() is not checking if the dfa is not present (NULL).

Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

apparmor: don't check for vmalloc_addr if kvzalloc() failed

commit 3197f5adf539a3ee6331f433a51483f8c842f890 upstream.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

apparmor: add missing id bounds check on dfa verification

commit 15756178c6a65b261a080e21af4766f59cafc112 upstream.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

apparmor: check that xindex is in trans_table bounds

commit 23ca7b640b4a55f8747301b6bd984dd05545f6a7 upstream.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Seth Arnold <seth.arnold@canonical.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Willy Tarreau <w@1wt.eu>

apparmor: internal paths should be treated as disconnected

commit bd35db8b8ca6e27fc17a9057ef78e1ddfc0de351 upstream.

Internal mounts are not mounted anywhere and as such should be treated
as disconnected paths.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Seth Arnold <seth.arnold@canonical.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Willy Tarreau <w@1wt.eu>

apparmor: fix disconnected bind mnts reconnection

commit f2e561d190da7ff5ee265fa460e2d7f753dddfda upstream.

Bind mounts can fail to be properly reconnected when PATH_CONNECT is
specified. Ensure that when PATH_CONNECT is specified the path has
a root.

BugLink: http://bugs.launchpad.net/bugs/1319984
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Seth Arnold <seth.arnold@canonical.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Willy Tarreau <w@1wt.eu>

apparmor: exec should not be returning ENOENT when it denies

commit 9049a7922124d843a2cd26a02b1d00a17596ec0c upstream.

The current behavior is confusing as it causes exec failures to report
the executable is missing instead of identifying that apparmor
caused the failure.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Seth Arnold <seth.arnold@canonical.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Willy Tarreau <w@1wt.eu>

apparmor: fix uninitialized lsm_audit member

commit b6b1b81b3afba922505b57f4c812bba022f7c4a9 upstream.

BugLink: http://bugs.launchpad.net/bugs/1268727
The task field in the lsm_audit struct needs to be initialized if
a change_hat fails, otherwise the following oops will occur

BUG: unable to handle kernel paging request at 0000002fbead7d08
IP: [<ffffffff8171153e>] _raw_spin_lock+0xe/0x50
PGD 1e3f35067 PUD 0
Oops: 0002 [#1] SMP
Modules linked in: pppox crc_ccitt p8023 p8022 psnap llc ax25 btrfs raid6_pq xor xfs libcrc32c dm_multipath scsi_dh kvm_amd dcdbas kvm microcode amd64_edac_mod joydev edac_core psmouse edac_mce_amd serio_raw k10temp sp5100_tco i2c_piix4 ipmi_si ipmi_msghandler acpi_power_meter mac_hid lp parport hid_generic usbhid hid pata_acpi mpt2sas ahci raid_class pata_atiixp bnx2 libahci scsi_transport_sas [last unloaded: tipc]
CPU: 2 PID: 699 Comm: changehat_twice Tainted: GF          O 3.13.0-7-generic #25-Ubuntu
Hardware name: Dell Inc. PowerEdge R415/08WNM9, BIOS 1.8.6 12/06/2011
task: ffff8802135c6000 ti: ffff880212986000 task.ti: ffff880212986000
RIP: 0010:[<ffffffff8171153e>]  [<ffffffff8171153e>] _raw_spin_lock+0xe/0x50
RSP: 0018:ffff880212987b68  EFLAGS: 00010006
RAX: 0000000000020000 RBX: 0000002fbead7500 RCX: 0000000000000000
RDX: 0000000000000292 RSI: ffff880212987ba8 RDI: 0000002fbead7d08
RBP: ffff880212987b68 R08: 0000000000000246 R09: ffff880216e572a0
R10: ffffffff815fd677 R11: ffffea0008469580 R12: ffffffff8130966f
R13: ffff880212987ba8 R14: 0000002fbead7d08 R15: ffff8800d8c6b830
FS:  00002b5e6c84e7c0(0000) GS:ffff880216e40000(0000) knlGS:0000000055731700
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000002fbead7d08 CR3: 000000021270f000 CR4: 00000000000006e0
Stack:
 ffff880212987b98 ffffffff81075f17 ffffffff8130966f 0000000000000009
 0000000000000000 0000000000000000 ffff880212987bd0 ffffffff81075f7c
 0000000000000292 ffff880212987c08 ffff8800d8c6b800 0000000000000026
Call Trace:
 [<ffffffff81075f17>] __lock_task_sighand+0x47/0x80
 [<ffffffff8130966f>] ? apparmor_cred_prepare+0x2f/0x50
 [<ffffffff81075f7c>] do_send_sig_info+0x2c/0x80
 [<ffffffff81075fee>] send_sig_info+0x1e/0x30
 [<ffffffff8130242d>] aa_audit+0x13d/0x190
 [<ffffffff8130c1dc>] aa_audit_file+0xbc/0x130
 [<ffffffff8130966f>] ? apparmor_cred_prepare+0x2f/0x50
 [<ffffffff81304cc2>] aa_change_hat+0x202/0x530
 [<ffffffff81308fc6>] aa_setprocattr_changehat+0x116/0x1d0
 [<ffffffff8130a11d>] apparmor_setprocattr+0x25d/0x300
 [<ffffffff812cee56>] security_setprocattr+0x16/0x20
 [<ffffffff8121fc87>] proc_pid_attr_write+0x107/0x130
 [<ffffffff811b7604>] vfs_write+0xb4/0x1f0
 [<ffffffff811b8039>] SyS_write+0x49/0xa0
 [<ffffffff8171a1bf>] tracesys+0xe1/0xe6

Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Seth Arnold <seth.arnold@canonical.com>
Acked-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Willy Tarreau <w@1wt.eu>

Fix regression which breaks DFS mounting

commit d171356ff11ab1825e456dfb979755e01b3c54a1 upstream.

Patch a6b5058 results in -EREMOTE returned by is_path_accessible() in
cifs_mount() to be ignored which breaks DFS mounting.

Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

Move check for prefix path to within cifs_get_root()

commit 348c1bfa84dfc47da1f1234b7f2bf09fa798edea upstream.

Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Tested-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Acked-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Willy Tarreau <w@1wt.eu>

Compare prepaths when comparing superblocks

commit c1d8b24d18192764fe82067ec6aa8d4c3bf094e0 upstream.

The patch
Fs/cifs: make share unaccessible at root level mountable
makes use of prepaths when any component of the underlying path is
inaccessible.

When mounting 2 separate shares having different prepaths but are other
wise similar in other respects, we end up sharing superblocks when we
shouldn't be doing so.

Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Tested-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Acked-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Willy Tarreau <w@1wt.eu>

Fix memory leaks in cifs_do_mount()

commit 4214ebf4654798309364d0c678b799e402f38288 upstream.

Fix memory leaks introduced by the patch
Fs/cifs: make share unaccessible at root level mountable

Also move allocation of cifs_sb->prepath to cifs_setup_cifs_sb().

Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Tested-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Acked-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Willy Tarreau <w@1wt.eu>

vmxnet3: Wake queue from reset work

commit 277964e19e1416ca31301e113edb2580c81a8b66 upstream.

vmxnet3_reset_work() expects tx queues to be stopped (via
vmxnet3_quiesce_dev -> netif_tx_disable). However, this races with the
netif_wake_queue() call in netif_tx_timeout() such that the driver's
start_xmit routine may be called unexpectedly, triggering one of the BUG_ON
in vmxnet3_map_pkt with a stack trace like this:

RIP: 0010:[<ffffffffa00cf4bc>] vmxnet3_map_pkt+0x3ac/0x4c0 [vmxnet3]
 [<ffffffffa00cf7e0>] vmxnet3_tq_xmit+0x210/0x4e0 [vmxnet3]
 [<ffffffff813ab144>] dev_hard_start_xmit+0x2e4/0x4c0
 [<ffffffff813c956e>] sch_direct_xmit+0x17e/0x1e0
 [<ffffffff813c96a7>] __qdisc_run+0xd7/0x130
 [<ffffffff813a6a7a>] net_tx_action+0x10a/0x200
 [<ffffffff810691df>] __do_softirq+0x11f/0x260
 [<ffffffff81472fdc>] call_softirq+0x1c/0x30
 [<ffffffff81004695>] do_softirq+0x65/0xa0
 [<ffffffff81069b89>] local_bh_enable_ip+0x99/0xa0
 [<ffffffffa031ff36>] destroy_conntrack+0x96/0x110 [nf_conntrack]
 [<ffffffff813d65e2>] nf_conntrack_destroy+0x12/0x20
 [<ffffffff8139c6d5>] skb_release_head_state+0xb5/0xf0
 [<ffffffff8139d299>] skb_release_all+0x9/0x20
 [<ffffffff8139cfe9>] __kfree_skb+0x9/0x90
 [<ffffffffa00d0069>] vmxnet3_quiesce_dev+0x209/0x340 [vmxnet3]
 [<ffffffffa00d020a>] vmxnet3_reset_work+0x6a/0xa0 [vmxnet3]
 [<ffffffff8107d7cc>] process_one_work+0x16c/0x350
 [<ffffffff810804fa>] worker_thread+0x17a/0x410
 [<ffffffff810848c6>] kthread+0x96/0xa0
 [<ffffffff81472ee4>] kernel_thread_helper+0x4/0x10

Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>

NFSv4: Ensure nfs_atomic_open set the dentry verifier on ENOENT

commit 809fd143de8805970eec02c27c0bc2622a6ecbda upstream.

If the OPEN rpc call to the server fails with an ENOENT call, nfs_atomic_open
will create a negative dentry for that file, however it currently fails
to call nfs_set_verifier(), thus causing the dentry to be immediately
revalidated on the next call to nfs_lookup_revalidate() instead of following
the usual lookup caching rules.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

ARM: dts: da850-evm: fix read access to SPI flash

commit 43849785e1079f6606a31cb7fda92d1200849728 upstream.

Read access to the SPI flash are broken on da850-evm, i.e. the data
read is not what is actually programmed on the flash.
According to the datasheet for the M25P64 part present on the da850-evm,
if the SPI frequency is higher than 20MHz then the READ command is not
usable anymore and only the FAST_READ command can be used to read data.

This commit specifies in the DTS that we should use FAST_READ command
instead of the READ command.

Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Fabien Parent <fparent@baylibre.com>
[nsekhar@ti.com: subject line adjustment]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>

ARM: 8634/1: hw_breakpoint: blacklist Scorpion CPUs

commit ddc37832a1349f474c4532de381498020ed71d31 upstream.

On APQ8060, the kernel crashes in arch_hw_breakpoint_init, taking an
undefined instruction trap within write_wb_reg. This is because Scorpion
CPUs erroneously appear to set DBGPRSR.SPD when WFI is issued, even if
the core is not powered down. When DBGPRSR.SPD is set, breakpoint and
watchpoint registers are treated as undefined.

It's possible to trigger similar crashes later on from userspace, by
requesting the kernel to install a breakpoint or watchpoint, as we can
go idle at any point between the reset of the debug registers and their
later use. This has always been the case.

Given that this has always been broken, no-one has complained until now,
and there is no clear workaround, disable hardware breakpoints and
watchpoints on Scorpion to avoid these issues.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Willy Tarreau <w@1wt.eu>

qla2xxx: Fix crash due to null pointer access

commit fc1ffd6cb38a1c1af625b9833c41928039e733f5 upstream.

During code inspection, while investigating following stack trace
seen on one of the test setup, we found out there was possibility
of memory leak becuase driver was not unwinding the stack properly.

This issue has not been reproduced in a test environment or on a
customer setup.

Here's stack trace that was seen.

[1469877.797315] Call Trace:
[1469877.799940]  [<ffffffffa03ab6e9>] qla2x00_mem_alloc+0xb09/0x10c0 [qla2xxx]
[1469877.806980]  [<ffffffffa03ac50a>] qla2x00_probe_one+0x86a/0x1b50 [qla2xxx]
[1469877.814013]  [<ffffffff813b6d01>] ? __pm_runtime_resume+0x51/0xa0
[1469877.820265]  [<ffffffff8157c1f5>] ? _raw_spin_lock_irqsave+0x25/0x90
[1469877.826776]  [<ffffffff8157cd2d>] ? _raw_spin_unlock_irqrestore+0x6d/0x80
[1469877.833720]  [<ffffffff810741d1>] ? preempt_count_sub+0xb1/0x100
[1469877.839885]  [<ffffffff8157cd0c>] ? _raw_spin_unlock_irqrestore+0x4c/0x80
[1469877.846830]  [<ffffffff81319b9c>] local_pci_probe+0x4c/0xb0
[1469877.852562]  [<ffffffff810741d1>] ? preempt_count_sub+0xb1/0x100
[1469877.858727]  [<ffffffff81319c89>] pci_call_probe+0x89/0xb0

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
[ bvanassche: Fixed spelling in patch description ]
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

x86/PCI: Ignore _CRS on Supermicro X8DTH-i/6/iF/6F

commit 89e9f7bcd8744ea25fcf0ac671b8d72c10d7d790 upstream.

Martin reported that the Supermicro X8DTH-i/6/iF/6F advertises incorrect
host bridge windows via _CRS:

  pci_root PNP0A08:00: host bridge window [io  0xf000-0xffff]
  pci_root PNP0A08:01: host bridge window [io  0xf000-0xffff]

Both bridges advertise the 0xf000-0xffff window, which cannot be correct.

Work around this by ignoring _CRS on this system.  The downside is that we
may not assign resources correctly to hot-added PCI devices (if they are
possible on this system).

Link: https://bugzilla.kernel.org/show_bug.cgi?id=42606
Reported-by: Martin Burnicki <martin.burnicki@meinberg.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

pinctrl: sh-pfc: Do not unconditionally support PIN_CONFIG_BIAS_DISABLE

commit 5d7400c4acbf7fe633a976a89ee845f7333de3e4 upstream.

Always stating PIN_CONFIG_BIAS_DISABLE is supported gives untrue output
when examining /sys/kernel/debug/pinctrl/e6060000.pfc/pinconf-pins if
the operation get_bias() is implemented but the pin is not handled by
the get_bias() implementation. In that case the output will state that
"input bias disabled" indicating that this pin has bias control
support.

Make support for PIN_CONFIG_BIAS_DISABLE depend on that the pin either
supports SH_PFC_PIN_CFG_PULL_UP or SH_PFC_PIN_CFG_PULL_DOWN. This also
solves the issue where SoC specific implementations print error messages
if their particular implementation of {set,get}_bias() is called with a
pin it does not know about.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Willy Tarreau <w@1wt.eu>

sysrq: attach sysrq handler correctly for 32-bit kernel

commit 802c03881f29844af0252b6e22be5d2f65f93fd0 upstream.

The sysrq input handler should be attached to the input device which has
a left alt key.

On 32-bit kernels, some input devices which has a left alt key cannot
attach sysrq handler.  Because the keybit bitmap in struct input_device_id
for sysrq is not correctly initialized.  KEY_LEFTALT is 56 which is
greater than BITS_PER_LONG on 32-bit kernels.

I found this problem when using a matrix keypad device which defines
a KEY_LEFTALT (56) but doesn't have a KEY_O (24 == 56%32).

Cc: Jiri Slaby <jslaby@suse.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>

vme: Fix wrong pointer utilization in ca91cx42_slave_get

commit c8a6a09c1c617402cc9254b2bc8da359a0347d75 upstream.

In ca91cx42_slave_get function, the value pointed by vme_base pointer is
set through:

*vme_base = ioread32(bridge->base + CA91CX42_VSI_BS[i]);

So it must be dereferenced to be used in calculation of pci_base:

*pci_base = (dma_addr_t)*vme_base + pci_offset;

This bug was caught thanks to the following gcc warning:

drivers/vme/bridges/vme_ca91cx42.c: In function ‘ca91cx42_slave_get’:
drivers/vme/bridges/vme_ca91cx42.c:467:14: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
*pci_base = (dma_addr_t)vme_base + pci_offset;

Signed-off-by: Augusto Mecking Caringi <augustocaringi@gmail.com>
Acked-By: Martyn Welch <martyn@welchs.me.uk>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Willy Tarreau <w@1wt.eu>

i2c: fix kernel memory disclosure in dev interface

commit 30f939feaeee23e21391cfc7b484f012eb189c3c upstream.

i2c_smbus_xfer() does not always fill an entire block, allowing
kernel stack memory disclosure through the temp variable. Clear
it before it's read to.

Signed-off-by: Vlad Tsyrklevich <vlad@tsyrklevich.net>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Willy Tarreau <w@1wt.eu>

Input: i8042 - add Clevo P650RS to the i8042 reset list

commit 7c5bb4ac2b76d2a09256aec8a7d584bf3e2b0466 upstream.

Clevo P650RS and other similar devices require i8042 to be reset in order
to detect Synaptics touchpad.

Reported-by: Paweł Bylica <chfast@gmail.com>
Tested-by: Ed Bordin <edbordin@gmail.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=190301
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

Input: mpr121 - set missing event capability

commit 9723ddc8fe0d76ce41fe0dc16afb241ec7d0a29d upstream.

This driver reports misc scan input events on the sensor's status
register changes.  But the event capability for them was not set in the
device initialization, so these events were ignored.

This change adds the missing event capability.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Oliver Neukum <ONeukum@suse.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Willy Tarreau <w@1wt.eu>

Input: mpr121 - handle multiple bits change of status register

commit 08fea55e37f58371bffc5336a59e55d1f155955a upstream.

This driver reports input events on their interrupts which are triggered
by the sensor's status register changes.  But only single bit change is
reported in the interrupt handler.  So if there are multiple bits are
changed at almost the same time, other press or release events are ignored.

This fixes it by detecting all changed bits in the status register.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Oliver Neukum <ONeukum@suse.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Willy Tarreau <w@1wt.eu>

Input: tca8418 - use the interrupt trigger from the device tree

commit 259b77ef853cc375a5c9198cf81f9b79fc19413c upstream.

The TCA8418 might be used using different interrupt triggers on various
boards. This is not working so far because the current code forces a
falling edge trigger.

The device tree already provides a trigger type, so let's use whatever it
sets up, and since we can be loaded without DT, keep the old behaviour for
the non-DT case.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Oliver Neukum <ONeukum@suse.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Willy Tarreau <w@1wt.eu>

Input: joydev - do not report stale values on first open

commit 45536d373a21d441bd488f618b6e3e9bfae839f3 upstream.

Postpone axis initialization to the first open instead of doing it
in joydev_connect. This is to make sure the generated startup events
are representative of the current joystick state rather than what
it was when joydev_connect() was called, potentially much earlier.
Once the first user is connected to joydev node we'll be updating
joydev->abs[] values and subsequent clients will be getting correct
initial states as well.

This solves issues with joystick driven menus that start scrolling
up each time they are started, until the user moves the joystick to
generate events. In emulator menu setups where the menu program is
restarted every time the game exits, the repeated need to move the
joystick to stop the unintended scrolling gets old rather quickly...

Signed-off-by: Raphael Assenat <raph@raphnet.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Oliver Neukum <ONeukum@suse.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Willy Tarreau <w@1wt.eu>

Input: kbtab - validate number of endpoints before using them

commit cb1b494663e037253337623bf1ef2df727883cb7 upstream.

Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer should a malicious device lack endpoints.

Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

Input: iforce - validate number of endpoints before using them

commit 59cf8bed44a79ec42303151dd014fdb6434254bb upstream.

Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer or accessing memory that lie beyond the end of the endpoint
array should a malicious device lack the expected endpoints.

Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

Input: i8042 - add noloop quirk for Dell Embedded Box PC 3000

commit 45838660e34d90db8d4f7cbc8fd66e8aff79f4fe upstream.

The aux port does not get detected without noloop quirk, so external PS/2
mouse cannot work as result.

The PS/2 mouse can work with this quirk.

BugLink: https://bugs.launchpad.net/bugs/1591053
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

Input: xpad - use correct product id for x360w controllers

commit b6fc513da50c5dbc457a8ad6b58b046a6a68fd9d upstream.

currently the controllers get the same product id as the wireless
receiver. However the controllers actually have their own product id.

The patch makes the driver expose the same product id as the windows
driver.

This improves compatibility when running applications with WINE.

see https://github.com/paroj/xpad/issues/54

Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>

HID: hid-cypress: validate length of report

commit 1ebb71143758f45dc0fa76e2f48429e13b16d110 upstream.

Make sure we have enough of a report structure to validate before
looking at it.

Reported-by: Benoit Camredon <benoit.camredon@airbus.com>
Tested-by: Benoit Camredon <benoit.camredon@airbus.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Willy Tarreau <w@1wt.eu>

igmp: Make igmp group member RFC 3376 compliant

commit 7ababb782690e03b78657e27bd051e20163af2d6 upstream.

5.2. Action on Reception of a Query

 When a system receives a Query, it does not respond immediately.
 Instead, it delays its response by a random amount of time, bounded
 by the Max Resp Time value derived from the Max Resp Code in the
 received Query message.  A system may receive a variety of Queries on
 different interfaces and of different kinds (e.g., General Queries,
 Group-Specific Queries, and Group-and-Source-Specific Queries), each
 of which may require its own delayed response.

 Before scheduling a response to a Query, the system must first
 consider previously scheduled pending responses and in many cases
 schedule a combined response.  Therefore, the system must be able to
 maintain the following state:

 o A timer per interface for scheduling responses to General Queries.

 o A per-group and interface timer for scheduling responses to Group-
   Specific and Group-and-Source-Specific Queries.

 o A per-group and interface list of sources to be reported in the
   response to a Group-and-Source-Specific Query.

 When a new Query with the Router-Alert option arrives on an
 interface, provided the system has state to report, a delay for a
 response is randomly selected in the range (0, [Max Resp Time]) where
 Max Resp Time is derived from Max Resp Code in the received Query
 message.  The following rules are then used to determine if a Report
 needs to be scheduled and the type of Report to schedule.  The rules
 are considered in order and only the first matching rule is applied.

 1. If there is a pending response to a previous General Query
    scheduled sooner than the selected delay, no additional response
    needs to be scheduled.

 2. If the received Query is a General Query, the interface timer is
    used to schedule a response to the General Query after the
    selected delay.  Any previously pending response to a General
    Query is canceled.
--8<--

Currently the timer is rearmed with new random expiration time for
every incoming query regardless of possibly already pending report.
Which is not aligned with the above RFE.
It also might happen that higher rate of incoming queries can
postpone the report after the expiration time of the first query
causing group membership loss.

Now the per interface general query timer is rearmed only
when there is no pending report already scheduled on that interface or
the newly selected expiration time is before the already pending
scheduled report.

Signed-off-by: Michal Tesar <mtesar@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>

drop_monitor: consider inserted data in genlmsg_end

commit 3b48ab2248e61408910e792fe84d6ec466084c1a upstream.

Final nlmsg_len field update must reflect inserted net_dm_drop_point
data.

This patch depends on previous patch:
"drop_monitor: add missing call to genlmsg_end"

Signed-off-by: Reiter Wolfgang <wr0112358@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>

drop_monitor: add missing call to genlmsg_end

commit 4200462d88f47f3759bdf4705f87e207b0f5b2e4 upstream.

Update nlmsg_len field with genlmsg_end to enable userspace processing
using nlmsg_next helper. Also adds error handling.

Signed-off-by: Reiter Wolfgang <wr0112358@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>

netvsc: reduce maximum GSO size

commit a50af86dd49ee1851d1ccf06dd0019c05b95e297 upstream.

Hyper-V (and Azure) support using NVGRE which requires some extra space
for encapsulation headers. Because of this the largest allowed TSO
packet is reduced.

For older releases, hard code a fixed reduced value.  For next release,
there is a better solution which uses result of host offload
negotiation.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>