From: Kirill A. Shutemov Date: Thu, 8 Mar 2012 16:12:28 +0000 (+0000) Subject: gma500: oaktrail_hdmi: drop dead code X-Git-Url: https://git.stricted.de/?p=GitHub%2Fmt8127%2Fandroid_kernel_alcatel_ttab.git;a=commitdiff_plain;h=e1bb07cbe18b28d112122deb6a7f2ef67ebd95a6 gma500: oaktrail_hdmi: drop dead code Signed-off-by: Kirill A. Shutemov Signed-off-by: Alan Cox Signed-off-by: Dave Airlie --- diff --git a/drivers/gpu/drm/gma500/oaktrail_hdmi.c b/drivers/gpu/drm/gma500/oaktrail_hdmi.c index e4c73c680c99..f3fc6939cfb3 100644 --- a/drivers/gpu/drm/gma500/oaktrail_hdmi.c +++ b/drivers/gpu/drm/gma500/oaktrail_hdmi.c @@ -125,59 +125,6 @@ static const struct oaktrail_hdmi_limit oaktrail_hdmi_limit = { .nf = { .min = NF_MIN, .max = NF_MAX }, }; -static void wait_for_vblank(struct drm_device *dev) -{ - /* FIXME: Can we do this as a sleep ? */ - /* Wait for 20ms, i.e. one cycle at 50hz. */ - mdelay(20); -} - -static void scu_busy_loop(void *scu_base) -{ - u32 status = 0; - u32 loop_count = 0; - - status = readl(scu_base + 0x04); - while (status & 1) { - udelay(1); /* scu processing time is in few u secods */ - status = readl(scu_base + 0x04); - loop_count++; - /* break if scu doesn't reset busy bit after huge retry */ - if (loop_count > 1000) { - DRM_DEBUG_KMS("SCU IPC timed out"); - return; - } - } -} - -static void oaktrail_hdmi_reset(struct drm_device *dev) -{ - void *base; - /* FIXME: at least make these defines */ - unsigned int scu_ipc_mmio = 0xff11c000; - int scu_len = 1024; - - base = ioremap((resource_size_t)scu_ipc_mmio, scu_len); - if (base == NULL) { - DRM_ERROR("failed to map SCU mmio\n"); - return; - } - - /* scu ipc: assert hdmi controller reset */ - writel(0xff11d118, base + 0x0c); - writel(0x7fffffdf, base + 0x80); - writel(0x42005, base + 0x0); - scu_busy_loop(base); - - /* scu ipc: de-assert hdmi controller reset */ - writel(0xff11d118, base + 0x0c); - writel(0x7fffffff, base + 0x80); - writel(0x42005, base + 0x0); - scu_busy_loop(base); - - iounmap(base); -} - static void oaktrail_hdmi_audio_enable(struct drm_device *dev) { struct drm_psb_private *dev_priv = dev->dev_private; @@ -208,104 +155,6 @@ static void oaktrail_hdmi_audio_disable(struct drm_device *dev) HDMI_READ(HDMI_HCR); } -void oaktrail_crtc_hdmi_dpms(struct drm_crtc *crtc, int mode) -{ - struct drm_device *dev = crtc->dev; - u32 temp; - - switch (mode) { - case DRM_MODE_DPMS_OFF: - /* Disable VGACNTRL */ - REG_WRITE(VGACNTRL, 0x80000000); - - /* Disable plane */ - temp = REG_READ(DSPBCNTR); - if ((temp & DISPLAY_PLANE_ENABLE) != 0) { - REG_WRITE(DSPBCNTR, temp & ~DISPLAY_PLANE_ENABLE); - REG_READ(DSPBCNTR); - /* Flush the plane changes */ - REG_WRITE(DSPBSURF, REG_READ(DSPBSURF)); - REG_READ(DSPBSURF); - } - - /* Disable pipe B */ - temp = REG_READ(PIPEBCONF); - if ((temp & PIPEACONF_ENABLE) != 0) { - REG_WRITE(PIPEBCONF, temp & ~PIPEACONF_ENABLE); - REG_READ(PIPEBCONF); - } - - /* Disable LNW Pipes, etc */ - temp = REG_READ(PCH_PIPEBCONF); - if ((temp & PIPEACONF_ENABLE) != 0) { - REG_WRITE(PCH_PIPEBCONF, temp & ~PIPEACONF_ENABLE); - REG_READ(PCH_PIPEBCONF); - } - /* wait for pipe off */ - udelay(150); - /* Disable dpll */ - temp = REG_READ(DPLL_CTRL); - if ((temp & DPLL_PWRDN) == 0) { - REG_WRITE(DPLL_CTRL, temp | (DPLL_PWRDN | DPLL_RESET)); - REG_WRITE(DPLL_STATUS, 0x1); - } - /* wait for dpll off */ - udelay(150); - break; - case DRM_MODE_DPMS_ON: - case DRM_MODE_DPMS_STANDBY: - case DRM_MODE_DPMS_SUSPEND: - /* Enable dpll */ - temp = REG_READ(DPLL_CTRL); - if ((temp & DPLL_PWRDN) != 0) { - REG_WRITE(DPLL_CTRL, temp & ~(DPLL_PWRDN | DPLL_RESET)); - temp = REG_READ(DPLL_CLK_ENABLE); - REG_WRITE(DPLL_CLK_ENABLE, temp | DPLL_EN_DISP | DPLL_SEL_HDMI | DPLL_EN_HDMI); - REG_READ(DPLL_CLK_ENABLE); - } - /* wait for dpll warm up */ - udelay(150); - - /* Enable pipe B */ - temp = REG_READ(PIPEBCONF); - if ((temp & PIPEACONF_ENABLE) == 0) { - REG_WRITE(PIPEBCONF, temp | PIPEACONF_ENABLE); - REG_READ(PIPEBCONF); - } - - /* Enable LNW Pipe B */ - temp = REG_READ(PCH_PIPEBCONF); - if ((temp & PIPEACONF_ENABLE) == 0) { - REG_WRITE(PCH_PIPEBCONF, temp | PIPEACONF_ENABLE); - REG_READ(PCH_PIPEBCONF); - } - wait_for_vblank(dev); - - /* Enable plane */ - temp = REG_READ(DSPBCNTR); - if ((temp & DISPLAY_PLANE_ENABLE) == 0) { - REG_WRITE(DSPBCNTR, temp | DISPLAY_PLANE_ENABLE); - /* Flush the plane changes */ - REG_WRITE(DSPBSURF, REG_READ(DSPBSURF)); - REG_READ(DSPBSURF); - } - psb_intel_crtc_load_lut(crtc); - } - /* DSPARB */ - REG_WRITE(DSPARB, 0x00003fbf); - /* FW1 */ - REG_WRITE(0x70034, 0x3f880a0a); - /* FW2 */ - REG_WRITE(0x70038, 0x0b060808); - /* FW4 */ - REG_WRITE(0x70050, 0x08030404); - /* FW5 */ - REG_WRITE(0x70054, 0x04040404); - /* LNC Chicken Bits */ - REG_WRITE(0x70400, 0x4000); -} - - static void oaktrail_hdmi_dpms(struct drm_encoder *encoder, int mode) { static int dpms_mode = -1; @@ -327,182 +176,6 @@ static void oaktrail_hdmi_dpms(struct drm_encoder *encoder, int mode) HDMI_WRITE(HDMI_VIDEO_REG, temp); } -static unsigned int htotal_calculate(struct drm_display_mode *mode) -{ - u32 htotal, new_crtc_htotal; - - htotal = (mode->crtc_hdisplay - 1) | ((mode->crtc_htotal - 1) << 16); - - /* - * 1024 x 768 new_crtc_htotal = 0x1024; - * 1280 x 1024 new_crtc_htotal = 0x0c34; - */ - new_crtc_htotal = (mode->crtc_htotal - 1) * 200 * 1000 / mode->clock; - - return (mode->crtc_hdisplay - 1) | (new_crtc_htotal << 16); -} - -static void oaktrail_hdmi_find_dpll(struct drm_crtc *crtc, int target, - int refclk, struct oaktrail_hdmi_clock *best_clock) -{ - int np_min, np_max, nr_min, nr_max; - int np, nr, nf; - - np_min = DIV_ROUND_UP(oaktrail_hdmi_limit.vco.min, target * 10); - np_max = oaktrail_hdmi_limit.vco.max / (target * 10); - if (np_min < oaktrail_hdmi_limit.np.min) - np_min = oaktrail_hdmi_limit.np.min; - if (np_max > oaktrail_hdmi_limit.np.max) - np_max = oaktrail_hdmi_limit.np.max; - - nr_min = DIV_ROUND_UP((refclk * 1000), (target * 10 * np_max)); - nr_max = DIV_ROUND_UP((refclk * 1000), (target * 10 * np_min)); - if (nr_min < oaktrail_hdmi_limit.nr.min) - nr_min = oaktrail_hdmi_limit.nr.min; - if (nr_max > oaktrail_hdmi_limit.nr.max) - nr_max = oaktrail_hdmi_limit.nr.max; - - np = DIV_ROUND_UP((refclk * 1000), (target * 10 * nr_max)); - nr = DIV_ROUND_UP((refclk * 1000), (target * 10 * np)); - nf = DIV_ROUND_CLOSEST((target * 10 * np * nr), refclk); - DRM_DEBUG_KMS("np, nr, nf %d %d %d\n", np, nr, nf); - - /* - * 1024 x 768 np = 1; nr = 0x26; nf = 0x0fd8000; - * 1280 x 1024 np = 1; nr = 0x17; nf = 0x1034000; - */ - best_clock->np = np; - best_clock->nr = nr - 1; - best_clock->nf = (nf << 14); -} - -int oaktrail_crtc_hdmi_mode_set(struct drm_crtc *crtc, - struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode, - int x, int y, - struct drm_framebuffer *old_fb) -{ - struct drm_device *dev = crtc->dev; - struct drm_psb_private *dev_priv = dev->dev_private; - struct oaktrail_hdmi_dev *hdmi_dev = dev_priv->hdmi_priv; - int pipe = 1; - int htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B; - int hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B; - int hsync_reg = (pipe == 0) ? HSYNC_A : HSYNC_B; - int vtot_reg = (pipe == 0) ? VTOTAL_A : VTOTAL_B; - int vblank_reg = (pipe == 0) ? VBLANK_A : VBLANK_B; - int vsync_reg = (pipe == 0) ? VSYNC_A : VSYNC_B; - int dspsize_reg = (pipe == 0) ? DSPASIZE : DSPBSIZE; - int dsppos_reg = (pipe == 0) ? DSPAPOS : DSPBPOS; - int pipesrc_reg = (pipe == 0) ? PIPEASRC : PIPEBSRC; - int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF; - int refclk; - struct oaktrail_hdmi_clock clock; - u32 dspcntr, pipeconf, dpll, temp; - int dspcntr_reg = DSPBCNTR; - - /* Disable the VGA plane that we never use */ - REG_WRITE(VGACNTRL, VGA_DISP_DISABLE); - - /* XXX: Disable the panel fitter if it was on our pipe */ - - /* Disable dpll if necessary */ - dpll = REG_READ(DPLL_CTRL); - if ((dpll & DPLL_PWRDN) == 0) { - REG_WRITE(DPLL_CTRL, dpll | (DPLL_PWRDN | DPLL_RESET)); - REG_WRITE(DPLL_DIV_CTRL, 0x00000000); - REG_WRITE(DPLL_STATUS, 0x1); - } - udelay(150); - - /* reset controller: FIXME - can we sort out the ioremap mess ? */ - iounmap(hdmi_dev->regs); - oaktrail_hdmi_reset(dev); - - /* program and enable dpll */ - refclk = 25000; - oaktrail_hdmi_find_dpll(crtc, adjusted_mode->clock, refclk, &clock); - - /* Setting DPLL */ - dpll = REG_READ(DPLL_CTRL); - dpll &= ~DPLL_PDIV_MASK; - dpll &= ~(DPLL_PWRDN | DPLL_RESET); - REG_WRITE(DPLL_CTRL, 0x00000008); - REG_WRITE(DPLL_DIV_CTRL, ((clock.nf << 6) | clock.nr)); - REG_WRITE(DPLL_ADJUST, ((clock.nf >> 14) - 1)); - REG_WRITE(DPLL_CTRL, (dpll | (clock.np << DPLL_PDIV_SHIFT) | DPLL_ENSTAT | DPLL_DITHEN)); - REG_WRITE(DPLL_UPDATE, 0x80000000); - REG_WRITE(DPLL_CLK_ENABLE, 0x80050102); - udelay(150); - - hdmi_dev->regs = ioremap(hdmi_dev->mmio, hdmi_dev->mmio_len); - if (hdmi_dev->regs == NULL) { - DRM_ERROR("failed to do hdmi mmio mapping\n"); - return -ENOMEM; - } - - /* configure HDMI */ - HDMI_WRITE(0x1004, 0x1fd); - HDMI_WRITE(0x2000, 0x1); - HDMI_WRITE(0x2008, 0x0); - HDMI_WRITE(0x3130, 0x8); - HDMI_WRITE(0x101c, 0x1800810); - - temp = htotal_calculate(adjusted_mode); - REG_WRITE(htot_reg, temp); - REG_WRITE(hblank_reg, (adjusted_mode->crtc_hblank_start - 1) | ((adjusted_mode->crtc_hblank_end - 1) << 16)); - REG_WRITE(hsync_reg, (adjusted_mode->crtc_hsync_start - 1) | ((adjusted_mode->crtc_hsync_end - 1) << 16)); - REG_WRITE(vtot_reg, (adjusted_mode->crtc_vdisplay - 1) | ((adjusted_mode->crtc_vtotal - 1) << 16)); - REG_WRITE(vblank_reg, (adjusted_mode->crtc_vblank_start - 1) | ((adjusted_mode->crtc_vblank_end - 1) << 16)); - REG_WRITE(vsync_reg, (adjusted_mode->crtc_vsync_start - 1) | ((adjusted_mode->crtc_vsync_end - 1) << 16)); - REG_WRITE(pipesrc_reg, - ((mode->crtc_hdisplay - 1) << 16) | (mode->crtc_vdisplay - 1)); - - REG_WRITE(PCH_HTOTAL_B, (adjusted_mode->crtc_hdisplay - 1) | ((adjusted_mode->crtc_htotal - 1) << 16)); - REG_WRITE(PCH_HBLANK_B, (adjusted_mode->crtc_hblank_start - 1) | ((adjusted_mode->crtc_hblank_end - 1) << 16)); - REG_WRITE(PCH_HSYNC_B, (adjusted_mode->crtc_hsync_start - 1) | ((adjusted_mode->crtc_hsync_end - 1) << 16)); - REG_WRITE(PCH_VTOTAL_B, (adjusted_mode->crtc_vdisplay - 1) | ((adjusted_mode->crtc_vtotal - 1) << 16)); - REG_WRITE(PCH_VBLANK_B, (adjusted_mode->crtc_vblank_start - 1) | ((adjusted_mode->crtc_vblank_end - 1) << 16)); - REG_WRITE(PCH_VSYNC_B, (adjusted_mode->crtc_vsync_start - 1) | ((adjusted_mode->crtc_vsync_end - 1) << 16)); - REG_WRITE(PCH_PIPEBSRC, - ((mode->crtc_hdisplay - 1) << 16) | (mode->crtc_vdisplay - 1)); - - temp = adjusted_mode->crtc_hblank_end - adjusted_mode->crtc_hblank_start; - HDMI_WRITE(HDMI_HBLANK_A, ((adjusted_mode->crtc_hdisplay - 1) << 16) | temp); - - REG_WRITE(dspsize_reg, - ((mode->vdisplay - 1) << 16) | (mode->hdisplay - 1)); - REG_WRITE(dsppos_reg, 0); - - /* Flush the plane changes */ - { - struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; - crtc_funcs->mode_set_base(crtc, x, y, old_fb); - } - - /* Set up the display plane register */ - dspcntr = REG_READ(dspcntr_reg); - dspcntr |= DISPPLANE_GAMMA_ENABLE; - dspcntr |= DISPPLANE_SEL_PIPE_B; - dspcntr |= DISPLAY_PLANE_ENABLE; - - /* setup pipeconf */ - pipeconf = REG_READ(pipeconf_reg); - pipeconf |= PIPEACONF_ENABLE; - - REG_WRITE(pipeconf_reg, pipeconf); - REG_READ(pipeconf_reg); - - REG_WRITE(PCH_PIPEBCONF, pipeconf); - REG_READ(PCH_PIPEBCONF); - wait_for_vblank(dev); - - REG_WRITE(dspcntr_reg, dspcntr); - wait_for_vblank(dev); - - return 0; -} - static int oaktrail_hdmi_mode_valid(struct drm_connector *connector, struct drm_display_mode *mode) {