VERSION = 3
PATCHLEVEL = 10
-SUBLEVEL = 55
+SUBLEVEL = 56
EXTRAVERSION =
NAME = TOSSUG Baby Fish
CONFIG_SERIAL_SIRFSOC_CONSOLE=y
CONFIG_SERIAL_VT8500=y
CONFIG_SERIAL_VT8500_CONSOLE=y
+CONFIG_SERIAL_XILINX_PS_UART=y
+CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
CONFIG_IPMI_HANDLER=y
CONFIG_IPMI_SI=y
CONFIG_I2C=y
str r0, [sp, #S_OLD_R0] @ Save OLD_R0
zero_fp
+#ifdef CONFIG_ALIGNMENT_TRAP
+ ldr ip, __cr_alignment
+ ldr ip, [ip]
+ mcr p15, 0, ip, c1, c0 @ update control register
+#endif
+
+ enable_irq
+ ct_user_exit
+ get_thread_info tsk
+
/*
* Get the system call number.
*/
#ifdef CONFIG_ARM_THUMB
tst r8, #PSR_T_BIT
movne r10, #0 @ no thumb OABI emulation
- ldreq r10, [lr, #-4] @ get SWI instruction
+ USER( ldreq r10, [lr, #-4] ) @ get SWI instruction
#else
- ldr r10, [lr, #-4] @ get SWI instruction
+ USER( ldr r10, [lr, #-4] ) @ get SWI instruction
#endif
#ifdef CONFIG_CPU_ENDIAN_BE8
rev r10, r10 @ little endian instruction
/* Legacy ABI only, possibly thumb mode. */
tst r8, #PSR_T_BIT @ this is SPSR from save_user_regs
addne scno, r7, #__NR_SYSCALL_BASE @ put OS number in
- ldreq scno, [lr, #-4]
+ USER( ldreq scno, [lr, #-4] )
#else
/* Legacy ABI only. */
- ldr scno, [lr, #-4] @ get SWI instruction
+ USER( ldr scno, [lr, #-4] ) @ get SWI instruction
#endif
-#ifdef CONFIG_ALIGNMENT_TRAP
- ldr ip, __cr_alignment
- ldr ip, [ip]
- mcr p15, 0, ip, c1, c0 @ update control register
-#endif
- enable_irq
- ct_user_exit
-
- get_thread_info tsk
adr tbl, sys_call_table @ load syscall table pointer
#if defined(CONFIG_OABI_COMPAT)
eor r0, scno, #__NR_SYSCALL_BASE @ put OS number back
bcs arm_syscall
b sys_ni_syscall @ not private func
+
+#if defined(CONFIG_OABI_COMPAT) || !defined(CONFIG_AEABI)
+ /*
+ * We failed to handle a fault trying to access the page
+ * containing the swi instruction, but we're not really in a
+ * position to return -EFAULT. Instead, return back to the
+ * instruction and re-enter the user fault handling path trying
+ * to page it in. This will likely result in sending SEGV to the
+ * current task.
+ */
+9001:
+ sub lr, lr, #4
+ str lr, [sp, #S_PC]
+ b ret_fast_syscall
+#endif
ENDPROC(vector_swi)
/*
c = irq_data_get_irq_chip(d);
if (!c->irq_set_affinity)
pr_debug("IRQ%u: unable to set affinity\n", d->irq);
- else if (c->irq_set_affinity(d, affinity, true) == IRQ_SET_MASK_OK && ret)
+ else if (c->irq_set_affinity(d, affinity, false) == IRQ_SET_MASK_OK && ret)
cpumask_copy(d->affinity, affinity);
return ret;
#include <asm/pgalloc.h>
#include <asm/mmu_context.h>
#include <asm/cacheflush.h>
+#include <asm/fncpy.h>
#include <asm/mach-types.h>
#include <asm/system_misc.h>
-extern const unsigned char relocate_new_kernel[];
+extern void relocate_new_kernel(void);
extern const unsigned int relocate_new_kernel_size;
extern unsigned long kexec_start_address;
{
unsigned long page_list;
unsigned long reboot_code_buffer_phys;
+ unsigned long reboot_entry = (unsigned long)relocate_new_kernel;
+ unsigned long reboot_entry_phys;
void *reboot_code_buffer;
if (num_online_cpus() > 1) {
/* copy our kernel relocation code to the control code page */
- memcpy(reboot_code_buffer,
- relocate_new_kernel, relocate_new_kernel_size);
+ reboot_entry = fncpy(reboot_code_buffer,
+ reboot_entry,
+ relocate_new_kernel_size);
+ reboot_entry_phys = (unsigned long)reboot_entry +
+ (reboot_code_buffer_phys - (unsigned long)reboot_code_buffer);
-
- flush_icache_range((unsigned long) reboot_code_buffer,
- (unsigned long) reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE);
printk(KERN_INFO "Bye!\n");
if (kexec_reinit)
kexec_reinit();
- soft_restart(reboot_code_buffer_phys);
+ soft_restart(reboot_entry_phys);
}
void arch_crash_save_vmcoreinfo(void)
* relocate_kernel.S - put the kernel image in place to boot
*/
+#include <linux/linkage.h>
#include <asm/kexec.h>
- .globl relocate_new_kernel
-relocate_new_kernel:
+ .align 3 /* not needed for this code, but keeps fncpy() happy */
+
+ENTRY(relocate_new_kernel)
ldr r0,kexec_indirection_page
ldr r1,kexec_start_address
kexec_boot_atags:
.long 0x0
+ENDPROC(relocate_new_kernel)
+
relocate_new_kernel_end:
.globl relocate_new_kernel_size
*/
.align 5
ENTRY(v6_early_abort)
-#ifdef CONFIG_CPU_V6
- sub r1, sp, #4 @ Get unused stack location
- strex r0, r1, [r1] @ Clear the exclusive monitor
-#elif defined(CONFIG_CPU_32v6K)
- clrex
-#endif
mrc p15, 0, r1, c5, c0, 0 @ get FSR
mrc p15, 0, r0, c6, c0, 0 @ get FAR
/*
*/
.align 5
ENTRY(v7_early_abort)
- /*
- * The effect of data aborts on on the exclusive access monitor are
- * UNPREDICTABLE. Do a CLREX to clear the state
- */
- clrex
-
mrc p15, 0, r1, c5, c0, 0 @ get FSR
mrc p15, 0, r0, c6, c0, 0 @ get FAR
* This code is not portable to processors with late data abort handling.
*/
#define CODING_BITS(i) (i & 0x0e000000)
+#define COND_BITS(i) (i & 0xf0000000)
#define LDST_I_BIT(i) (i & (1 << 26)) /* Immediate constant */
#define LDST_P_BIT(i) (i & (1 << 24)) /* Preindex */
break;
case 0x04000000: /* ldr or str immediate */
+ if (COND_BITS(instr) == 0xf0000000) /* NEON VLDn, VSTn */
+ goto bad;
offset.un = OFFSET_BITS(instr);
handler = do_alignment_ldrstr;
break;
*/
#define ARM_MAX_BRP 16
#define ARM_MAX_WRP 16
-#define ARM_MAX_HBP_SLOTS (ARM_MAX_BRP + ARM_MAX_WRP)
/* Virtual debug register bases. */
#define AARCH64_DBG_REG_BVR 0
{
}
+static void tls_thread_flush(void)
+{
+ asm ("msr tpidr_el0, xzr");
+
+ if (is_compat_task()) {
+ current->thread.tp_value = 0;
+
+ /*
+ * We need to ensure ordering between the shadow state and the
+ * hardware state, so that we don't corrupt the hardware state
+ * with a stale shadow state during context switch.
+ */
+ barrier();
+ asm ("msr tpidrro_el0, xzr");
+ }
+}
+
void flush_thread(void)
{
fpsimd_flush_thread();
+ tls_thread_flush();
flush_ptrace_hw_breakpoint(current);
}
break;
}
}
- for (i = ARM_MAX_BRP; i < ARM_MAX_HBP_SLOTS && !bp; ++i) {
+
+ for (i = 0; i < ARM_MAX_WRP; ++i) {
if (current->thread.debug.hbp_watch[i] == bp) {
info.si_errno = -((i << 1) + 1);
break;
case __ARM_NR_compat_set_tls:
current->thread.tp_value = regs->regs[0];
+
+ /*
+ * Protect against register corruption from context switch.
+ * See comment in tls_thread_flush.
+ */
+ barrier();
asm ("msr tpidrro_el0, %0" : : "r" (regs->regs[0]));
return 0;
#include <linux/types.h>
#include <linux/kernel.h>
+#include <linux/string.h>
#include <asm/addrspace.h>
nop
#endif
b ftrace_stub
+#ifdef CONFIG_32BIT
+ addiu sp, sp, 8
+#else
nop
+#endif
static_trace:
MCOUNT_SAVE_REGS
move a1, AT /* arg2: parent's return address */
MCOUNT_RESTORE_REGS
+#ifdef CONFIG_32BIT
+ addiu sp, sp, 8
+#endif
.globl ftrace_stub
ftrace_stub:
RETURN_BACK
jal prepare_ftrace_return
nop
MCOUNT_RESTORE_REGS
+#ifndef CONFIG_DYNAMIC_FTRACE
+#ifdef CONFIG_32BIT
+ addiu sp, sp, 8
+#endif
+#endif
RETURN_BACK
END(ftrace_graph_caller)
# These flags should be implied by an hppa-linux configuration, but they
# are not in gcc 3.2.
-cflags-y += -mno-space-regs -mfast-indirect-calls
+cflags-y += -mno-space-regs
+
+# -mfast-indirect-calls is only relevant for 32-bit kernels.
+ifndef CONFIG_64BIT
+cflags-y += -mfast-indirect-calls
+endif
# Currently we save and restore fpregs on all kernel entry/interruption paths.
# If that gets optimized, we might need to disable the use of fpregs in the
STACK_FRAME_OVERHEAD + 288)
#define STACK_FRAME_MARKER 12
+#if defined(_CALL_ELF) && _CALL_ELF == 2
+#define STACK_FRAME_MIN_SIZE 32
+#else
+#define STACK_FRAME_MIN_SIZE STACK_FRAME_OVERHEAD
+#endif
+
/* Size of dummy stack frame allocated when calling signal handler. */
#define __SIGNAL_FRAMESIZE 128
#define __SIGNAL_FRAMESIZE32 64
#define STACK_FRAME_REGS_MARKER ASM_CONST(0x72656773)
#define STACK_INT_FRAME_SIZE (sizeof(struct pt_regs) + STACK_FRAME_OVERHEAD)
#define STACK_FRAME_MARKER 2
+#define STACK_FRAME_MIN_SIZE STACK_FRAME_OVERHEAD
/* Size of stack frame allocated when calling signal handler. */
#define __SIGNAL_FRAMESIZE 64
return 0; /* must be 16-byte aligned */
if (!validate_sp(sp, current, STACK_FRAME_OVERHEAD))
return 0;
- if (sp >= prev_sp + STACK_FRAME_OVERHEAD)
+ if (sp >= prev_sp + STACK_FRAME_MIN_SIZE)
return 1;
/*
* sp could decrease when we jump off an interrupt stack
__end_of_permanent_fixed_addresses,
/*
- * 256 temporary boot-time mappings, used by early_ioremap(),
+ * 512 temporary boot-time mappings, used by early_ioremap(),
* before ioremap() is functional.
*
- * If necessary we round it up to the next 256 pages boundary so
+ * If necessary we round it up to the next 512 pages boundary so
* that we can have a single pgd entry and a single pte table:
*/
#define NR_FIX_BTMAPS 64
-#define FIX_BTMAPS_SLOTS 4
+#define FIX_BTMAPS_SLOTS 8
#define TOTAL_FIX_BTMAPS (NR_FIX_BTMAPS * FIX_BTMAPS_SLOTS)
FIX_BTMAP_END =
(__end_of_permanent_fixed_addresses ^
for_each_cpu(sibling, cpu_sibling_mask(cpu))
cpumask_clear_cpu(cpu, cpu_sibling_mask(sibling));
+ for_each_cpu(sibling, cpu_llc_shared_mask(cpu))
+ cpumask_clear_cpu(cpu, cpu_llc_shared_mask(sibling));
+ cpumask_clear(cpu_llc_shared_mask(cpu));
cpumask_clear(cpu_sibling_mask(cpu));
cpumask_clear(cpu_core_mask(cpu));
c->phys_proc_id = 0;
elapsed = ns - kvm->arch.last_tsc_nsec;
if (vcpu->arch.virtual_tsc_khz) {
+ int faulted = 0;
+
/* n.b - signed multiplication and division required */
usdiff = data - kvm->arch.last_tsc_write;
#ifdef CONFIG_X86_64
usdiff = (usdiff * 1000) / vcpu->arch.virtual_tsc_khz;
#else
/* do_div() only does unsigned */
- asm("idivl %2; xor %%edx, %%edx"
- : "=A"(usdiff)
- : "A"(usdiff * 1000), "rm"(vcpu->arch.virtual_tsc_khz));
+ asm("1: idivl %[divisor]\n"
+ "2: xor %%edx, %%edx\n"
+ " movl $0, %[faulted]\n"
+ "3:\n"
+ ".section .fixup,\"ax\"\n"
+ "4: movl $1, %[faulted]\n"
+ " jmp 3b\n"
+ ".previous\n"
+
+ _ASM_EXTABLE(1b, 4b)
+
+ : "=A"(usdiff), [faulted] "=r" (faulted)
+ : "A"(usdiff * 1000), [divisor] "rm"(vcpu->arch.virtual_tsc_khz));
+
#endif
do_div(elapsed, 1000);
usdiff -= elapsed;
if (usdiff < 0)
usdiff = -usdiff;
+
+ /* idivl overflow => difference is larger than USEC_PER_SEC */
+ if (faulted)
+ usdiff = USEC_PER_SEC;
} else
usdiff = USEC_PER_SEC; /* disable TSC match window below */
#define VMALLOC_START 0xC0000000
#define VMALLOC_END 0xC7FEFFFF
#define TLBTEMP_BASE_1 0xC7FF0000
-#define TLBTEMP_BASE_2 0xC7FF8000
+#define TLBTEMP_BASE_2 (TLBTEMP_BASE_1 + DCACHE_WAY_SIZE)
+#if 2 * DCACHE_WAY_SIZE > ICACHE_WAY_SIZE
+#define TLBTEMP_SIZE (2 * DCACHE_WAY_SIZE)
+#else
+#define TLBTEMP_SIZE ICACHE_WAY_SIZE
+#endif
/*
* Xtensa Linux config PTE layout (when present):
*/
.macro get_fs ad, sp
GET_CURRENT(\ad,\sp)
+#if THREAD_CURRENT_DS > 1020
+ addi \ad, \ad, TASK_THREAD
+ l32i \ad, \ad, THREAD_CURRENT_DS - TASK_THREAD
+#else
l32i \ad, \ad, THREAD_CURRENT_DS
+#endif
.endm
/*
#define TCSETSW 0x5403
#define TCSETSF 0x5404
-#define TCGETA _IOR('t', 23, struct termio)
-#define TCSETA _IOW('t', 24, struct termio)
-#define TCSETAW _IOW('t', 25, struct termio)
-#define TCSETAF _IOW('t', 28, struct termio)
+#define TCGETA 0x80127417 /* _IOR('t', 23, struct termio) */
+#define TCSETA 0x40127418 /* _IOW('t', 24, struct termio) */
+#define TCSETAW 0x40127419 /* _IOW('t', 25, struct termio) */
+#define TCSETAF 0x4012741C /* _IOW('t', 28, struct termio) */
#define TCSBRK _IO('t', 29)
#define TCXONC _IO('t', 30)
#define TCFLSH _IO('t', 31)
-#define TIOCSWINSZ _IOW('t', 103, struct winsize)
-#define TIOCGWINSZ _IOR('t', 104, struct winsize)
+#define TIOCSWINSZ 0x40087467 /* _IOW('t', 103, struct winsize) */
+#define TIOCGWINSZ 0x80087468 /* _IOR('t', 104, struct winsize) */
#define TIOCSTART _IO('t', 110) /* start output, like ^Q */
#define TIOCSTOP _IO('t', 111) /* stop output, like ^S */
#define TIOCOUTQ _IOR('t', 115, int) /* output queue size */
#define TIOCSETD _IOW('T', 35, int)
#define TIOCGETD _IOR('T', 36, int)
#define TCSBRKP _IOW('T', 37, int) /* Needed for POSIX tcsendbreak()*/
-#define TIOCTTYGSTRUCT _IOR('T', 38, struct tty_struct) /* For debugging only*/
#define TIOCSBRK _IO('T', 39) /* BSD compatibility */
#define TIOCCBRK _IO('T', 40) /* BSD compatibility */
#define TIOCGSID _IOR('T', 41, pid_t) /* Return the session ID of FD*/
#define TIOCSERGETLSR _IOR('T', 89, unsigned int) /* Get line status reg. */
/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
# define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
-#define TIOCSERGETMULTI _IOR('T', 90, struct serial_multiport_struct) /* Get multiport config */
-#define TIOCSERSETMULTI _IOW('T', 91, struct serial_multiport_struct) /* Set multiport config */
+#define TIOCSERGETMULTI 0x80a8545a /* Get multiport config */
+ /* _IOR('T', 90, struct serial_multiport_struct) */
+#define TIOCSERSETMULTI 0x40a8545b /* Set multiport config */
+ /* _IOW('T', 91, struct serial_multiport_struct) */
#define TIOCMIWAIT _IO('T', 92) /* wait for a change on serial input line(s) */
#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
movi a7, 4 # sizeof(unsigned int)
access_ok a3, a7, a0, a2, .Leac # a0: scratch reg, a2: sp
- addi a6, a6, -1 # assuming SYS_XTENSA_ATOMIC_SET = 1
- _bgeui a6, SYS_XTENSA_COUNT - 1, .Lill
- _bnei a6, SYS_XTENSA_ATOMIC_CMP_SWP - 1, .Lnswp
+ _bgeui a6, SYS_XTENSA_COUNT, .Lill
+ _bnei a6, SYS_XTENSA_ATOMIC_CMP_SWP, .Lnswp
/* Fall through for ATOMIC_CMP_SWP. */
l32i a7, a2, PT_AREG7 # restore a7
l32i a0, a2, PT_AREG0 # restore a0
movi a2, 1 # and return 1
- addi a6, a6, 1 # restore a6 (really necessary?)
rfe
1: l32i a7, a2, PT_AREG7 # restore a7
l32i a0, a2, PT_AREG0 # restore a0
movi a2, 0 # return 0 (note that we cannot set
- addi a6, a6, 1 # restore a6 (really necessary?)
rfe
.Lnswp: /* Atomic set, add, and exg_add. */
TRY l32i a7, a3, 0 # orig
+ addi a6, a6, -SYS_XTENSA_ATOMIC_SET
add a0, a4, a7 # + arg
moveqz a0, a4, a6 # set
+ addi a6, a6, SYS_XTENSA_ATOMIC_SET
TRY s32i a0, a3, 0 # write new value
mov a0, a2
mov a2, a7
l32i a7, a0, PT_AREG7 # restore a7
l32i a0, a0, PT_AREG0 # restore a0
- addi a6, a6, 1 # restore a6 (really necessary?)
rfe
CATCH
movi a2, -EFAULT
rfe
-.Lill: l32i a7, a2, PT_AREG0 # restore a7
+.Lill: l32i a7, a2, PT_AREG7 # restore a7
l32i a0, a2, PT_AREG0 # restore a0
movi a2, -EINVAL
rfe
rsr a0, excvaddr
bltu a0, a3, 2f
- addi a1, a0, -(2 << (DCACHE_ALIAS_ORDER + PAGE_SHIFT))
+ addi a1, a0, -TLBTEMP_SIZE
bgeu a1, a3, 2f
/* Check if we have to restore an ITLB mapping. */
entry a1, 16
- mov a10, a2 # preserve 'prev' (a2)
mov a11, a3 # and 'next' (a3)
l32i a4, a2, TASK_THREAD_INFO
save_xtregs_user a4 a6 a8 a9 a12 a13 THREAD_XTREGS_USER
- s32i a0, a10, THREAD_RA # save return address
- s32i a1, a10, THREAD_SP # save stack pointer
+#if THREAD_RA > 1020 || THREAD_SP > 1020
+ addi a10, a2, TASK_THREAD
+ s32i a0, a10, THREAD_RA - TASK_THREAD # save return address
+ s32i a1, a10, THREAD_SP - TASK_THREAD # save stack pointer
+#else
+ s32i a0, a2, THREAD_RA # save return address
+ s32i a1, a2, THREAD_SP # save stack pointer
+#endif
/* Disable ints while we manipulate the stack pointer. */
load_xtregs_user a5 a6 a8 a9 a12 a13 THREAD_XTREGS_USER
wsr a14, ps
- mov a2, a10 # return 'prev'
rsync
retw
/* We currently don't support coherent memory outside KSEG */
- if (ret < XCHAL_KSEG_CACHED_VADDR
- || ret >= XCHAL_KSEG_CACHED_VADDR + XCHAL_KSEG_SIZE)
- BUG();
+ BUG_ON(ret < XCHAL_KSEG_CACHED_VADDR ||
+ ret > XCHAL_KSEG_CACHED_VADDR + XCHAL_KSEG_SIZE - 1);
if (ret != 0) {
void dma_free_coherent(struct device *hwdev, size_t size,
void *vaddr, dma_addr_t dma_handle)
{
- long addr=(long)vaddr+XCHAL_KSEG_CACHED_VADDR-XCHAL_KSEG_BYPASS_VADDR;
+ unsigned long addr = (unsigned long)vaddr +
+ XCHAL_KSEG_CACHED_VADDR - XCHAL_KSEG_BYPASS_VADDR;
- if (addr < 0 || addr >= XCHAL_KSEG_SIZE)
- BUG();
+ BUG_ON(addr < XCHAL_KSEG_CACHED_VADDR ||
+ addr > XCHAL_KSEG_CACHED_VADDR + XCHAL_KSEG_SIZE - 1);
free_pages(addr, get_order(size));
}
static void
cfq_update_group_weight(struct cfq_group *cfqg)
{
- BUG_ON(!RB_EMPTY_NODE(&cfqg->rb_node));
-
if (cfqg->new_weight) {
cfqg->weight = cfqg->new_weight;
cfqg->new_weight = 0;
}
+}
+
+static void
+cfq_update_group_leaf_weight(struct cfq_group *cfqg)
+{
+ BUG_ON(!RB_EMPTY_NODE(&cfqg->rb_node));
if (cfqg->new_leaf_weight) {
cfqg->leaf_weight = cfqg->new_leaf_weight;
/* add to the service tree */
BUG_ON(!RB_EMPTY_NODE(&cfqg->rb_node));
- cfq_update_group_weight(cfqg);
+ cfq_update_group_leaf_weight(cfqg);
__cfq_group_service_tree_add(st, cfqg);
/*
*/
while ((parent = cfqg_parent(pos))) {
if (propagate) {
+ cfq_update_group_weight(pos);
propagate = !parent->nr_active++;
parent->children_weight += pos->weight;
}
/* for extended dynamic devt allocation, currently only one major is used */
#define NR_EXT_DEVT (1 << MINORBITS)
-/* For extended devt allocation. ext_devt_mutex prevents look up
+/* For extended devt allocation. ext_devt_lock prevents look up
* results from going away underneath its user.
*/
-static DEFINE_MUTEX(ext_devt_mutex);
+static DEFINE_SPINLOCK(ext_devt_lock);
static DEFINE_IDR(ext_devt_idr);
static struct device_type disk_type;
}
/* allocate ext devt */
- mutex_lock(&ext_devt_mutex);
- idx = idr_alloc(&ext_devt_idr, part, 0, NR_EXT_DEVT, GFP_KERNEL);
- mutex_unlock(&ext_devt_mutex);
+ idr_preload(GFP_KERNEL);
+
+ spin_lock(&ext_devt_lock);
+ idx = idr_alloc(&ext_devt_idr, part, 0, NR_EXT_DEVT, GFP_NOWAIT);
+ spin_unlock(&ext_devt_lock);
+
+ idr_preload_end();
if (idx < 0)
return idx == -ENOSPC ? -EBUSY : idx;
*/
void blk_free_devt(dev_t devt)
{
- might_sleep();
-
if (devt == MKDEV(0, 0))
return;
if (MAJOR(devt) == BLOCK_EXT_MAJOR) {
- mutex_lock(&ext_devt_mutex);
+ spin_lock(&ext_devt_lock);
idr_remove(&ext_devt_idr, blk_mangle_minor(MINOR(devt)));
- mutex_unlock(&ext_devt_mutex);
+ spin_unlock(&ext_devt_lock);
}
}
sysfs_remove_link(block_depr, dev_name(disk_to_dev(disk)));
pm_runtime_set_memalloc_noio(disk_to_dev(disk), false);
device_del(disk_to_dev(disk));
- blk_free_devt(disk_to_dev(disk)->devt);
}
EXPORT_SYMBOL(del_gendisk);
} else {
struct hd_struct *part;
- mutex_lock(&ext_devt_mutex);
+ spin_lock(&ext_devt_lock);
part = idr_find(&ext_devt_idr, blk_mangle_minor(MINOR(devt)));
if (part && get_disk(part_to_disk(part))) {
*partno = part->partno;
disk = part_to_disk(part);
}
- mutex_unlock(&ext_devt_mutex);
+ spin_unlock(&ext_devt_lock);
}
return disk;
{
struct gendisk *disk = dev_to_disk(dev);
+ blk_free_devt(dev->devt);
disk_release_events(disk);
kfree(disk->random);
disk_replace_part_tbl(disk, NULL);
static void part_release(struct device *dev)
{
struct hd_struct *p = dev_to_part(dev);
+ blk_free_devt(dev->devt);
free_part_stats(p);
free_part_info(p);
kfree(p);
rcu_assign_pointer(ptbl->last_lookup, NULL);
kobject_put(part->holder_dir);
device_del(part_to_dev(part));
- blk_free_devt(part_devt(part));
hd_struct_put(part);
}
u32 field_bit_position;
u32 field_bit_length;
u16 resource_length;
+ u16 pin_number_index;
u8 field_flags;
u8 attribute;
u8 field_type;
ACPI_OBJECT_COMMON_HEADER ACPI_COMMON_FIELD_INFO u16 resource_length;
union acpi_operand_object *region_obj; /* Containing op_region object */
u8 *resource_buffer; /* resource_template for serial regions/fields */
+ u16 pin_number_index; /* Index relative to previous Connection/Template */
};
struct acpi_object_bank_field {
*/
info->resource_buffer = NULL;
info->connection_node = NULL;
+ info->pin_number_index = 0;
/*
* A Connection() is either an actual resource descriptor (buffer)
}
info->field_bit_position += info->field_bit_length;
+ info->pin_number_index++; /* Index relative to previous Connection() */
break;
default:
union acpi_operand_object *region_obj2;
void *region_context = NULL;
struct acpi_connection_info *context;
+ acpi_physical_address address;
ACPI_FUNCTION_TRACE(ev_address_space_dispatch);
/* We have everything we need, we can invoke the address space handler */
handler = handler_desc->address_space.handler;
-
- ACPI_DEBUG_PRINT((ACPI_DB_OPREGION,
- "Handler %p (@%p) Address %8.8X%8.8X [%s]\n",
- ®ion_obj->region.handler->address_space, handler,
- ACPI_FORMAT_NATIVE_UINT(region_obj->region.address +
- region_offset),
- acpi_ut_get_region_name(region_obj->region.
- space_id)));
+ address = (region_obj->region.address + region_offset);
/*
* Special handling for generic_serial_bus and general_purpose_io:
* There are three extra parameters that must be passed to the
* handler via the context:
- * 1) Connection buffer, a resource template from Connection() op.
- * 2) Length of the above buffer.
- * 3) Actual access length from the access_as() op.
+ * 1) Connection buffer, a resource template from Connection() op
+ * 2) Length of the above buffer
+ * 3) Actual access length from the access_as() op
+ *
+ * In addition, for general_purpose_io, the Address and bit_width fields
+ * are defined as follows:
+ * 1) Address is the pin number index of the field (bit offset from
+ * the previous Connection)
+ * 2) bit_width is the actual bit length of the field (number of pins)
*/
- if (((region_obj->region.space_id == ACPI_ADR_SPACE_GSBUS) ||
- (region_obj->region.space_id == ACPI_ADR_SPACE_GPIO)) &&
+ if ((region_obj->region.space_id == ACPI_ADR_SPACE_GSBUS) &&
context && field_obj) {
/* Get the Connection (resource_template) buffer */
context->length = field_obj->field.resource_length;
context->access_length = field_obj->field.access_length;
}
+ if ((region_obj->region.space_id == ACPI_ADR_SPACE_GPIO) &&
+ context && field_obj) {
+
+ /* Get the Connection (resource_template) buffer */
+
+ context->connection = field_obj->field.resource_buffer;
+ context->length = field_obj->field.resource_length;
+ context->access_length = field_obj->field.access_length;
+ address = field_obj->field.pin_number_index;
+ bit_width = field_obj->field.bit_length;
+ }
+
+ ACPI_DEBUG_PRINT((ACPI_DB_OPREGION,
+ "Handler %p (@%p) Address %8.8X%8.8X [%s]\n",
+ ®ion_obj->region.handler->address_space, handler,
+ ACPI_FORMAT_NATIVE_UINT(address),
+ acpi_ut_get_region_name(region_obj->region.
+ space_id)));
if (!(handler_desc->address_space.handler_flags &
ACPI_ADDR_HANDLER_DEFAULT_INSTALLED)) {
/* Call the handler */
- status = handler(function,
- (region_obj->region.address + region_offset),
- bit_width, value, context,
+ status = handler(function, address, bit_width, value, context,
region_obj2->extra.region_context);
if (ACPI_FAILURE(status)) {
buffer = &buffer_desc->integer.value;
}
+ if ((obj_desc->common.type == ACPI_TYPE_LOCAL_REGION_FIELD) &&
+ (obj_desc->field.region_obj->region.space_id ==
+ ACPI_ADR_SPACE_GPIO)) {
+ /*
+ * For GPIO (general_purpose_io), the Address will be the bit offset
+ * from the previous Connection() operator, making it effectively a
+ * pin number index. The bit_length is the length of the field, which
+ * is thus the number of pins.
+ */
+ ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
+ "GPIO FieldRead [FROM]: Pin %u Bits %u\n",
+ obj_desc->field.pin_number_index,
+ obj_desc->field.bit_length));
+
+ /* Lock entire transaction if requested */
+
+ acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags);
+
+ /* Perform the write */
+
+ status = acpi_ex_access_region(obj_desc, 0,
+ (u64 *)buffer, ACPI_READ);
+ acpi_ex_release_global_lock(obj_desc->common_field.field_flags);
+ if (ACPI_FAILURE(status)) {
+ acpi_ut_remove_reference(buffer_desc);
+ } else {
+ *ret_buffer_desc = buffer_desc;
+ }
+ return_ACPI_STATUS(status);
+ }
+
ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
"FieldRead [TO]: Obj %p, Type %X, Buf %p, ByteLen %X\n",
obj_desc, obj_desc->common.type, buffer,
*result_desc = buffer_desc;
return_ACPI_STATUS(status);
+ } else if ((obj_desc->common.type == ACPI_TYPE_LOCAL_REGION_FIELD) &&
+ (obj_desc->field.region_obj->region.space_id ==
+ ACPI_ADR_SPACE_GPIO)) {
+ /*
+ * For GPIO (general_purpose_io), we will bypass the entire field
+ * mechanism and handoff the bit address and bit width directly to
+ * the handler. The Address will be the bit offset
+ * from the previous Connection() operator, making it effectively a
+ * pin number index. The bit_length is the length of the field, which
+ * is thus the number of pins.
+ */
+ if (source_desc->common.type != ACPI_TYPE_INTEGER) {
+ return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
+ }
+
+ ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
+ "GPIO FieldWrite [FROM]: (%s:%X), Val %.8X [TO]: Pin %u Bits %u\n",
+ acpi_ut_get_type_name(source_desc->common.
+ type),
+ source_desc->common.type,
+ (u32)source_desc->integer.value,
+ obj_desc->field.pin_number_index,
+ obj_desc->field.bit_length));
+
+ buffer = &source_desc->integer.value;
+
+ /* Lock entire transaction if requested */
+
+ acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags);
+
+ /* Perform the write */
+
+ status = acpi_ex_access_region(obj_desc, 0,
+ (u64 *)buffer, ACPI_WRITE);
+ acpi_ex_release_global_lock(obj_desc->common_field.field_flags);
+ return_ACPI_STATUS(status);
}
/* Get a pointer to the data to be written */
obj_desc->field.resource_length = info->resource_length;
}
+ obj_desc->field.pin_number_index = info->pin_number_index;
+
/* Allow full data read from EC address space */
if ((obj_desc->field.region_obj->region.space_id ==
{ PCI_VDEVICE(INTEL, 0x9c85), board_ahci }, /* Wildcat Point-LP RAID */
{ PCI_VDEVICE(INTEL, 0x9c87), board_ahci }, /* Wildcat Point-LP RAID */
{ PCI_VDEVICE(INTEL, 0x9c8f), board_ahci }, /* Wildcat Point-LP RAID */
+ { PCI_VDEVICE(INTEL, 0x8c82), board_ahci }, /* 9 Series AHCI */
+ { PCI_VDEVICE(INTEL, 0x8c83), board_ahci }, /* 9 Series AHCI */
+ { PCI_VDEVICE(INTEL, 0x8c84), board_ahci }, /* 9 Series RAID */
+ { PCI_VDEVICE(INTEL, 0x8c85), board_ahci }, /* 9 Series RAID */
+ { PCI_VDEVICE(INTEL, 0x8c86), board_ahci }, /* 9 Series RAID */
+ { PCI_VDEVICE(INTEL, 0x8c87), board_ahci }, /* 9 Series RAID */
+ { PCI_VDEVICE(INTEL, 0x8c8e), board_ahci }, /* 9 Series RAID */
+ { PCI_VDEVICE(INTEL, 0x8c8f), board_ahci }, /* 9 Series RAID */
/* JMicron 360/1/3/5/6, match class to avoid IDE function */
{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x917a),
.driver_data = board_ahci_yes_fbs }, /* 88se9172 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x9172),
+ .driver_data = board_ahci_yes_fbs }, /* 88se9182 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x9182),
.driver_data = board_ahci_yes_fbs }, /* 88se9172 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x9192),
.driver_data = board_ahci_yes_fbs }, /* 88se9172 on some Gigabyte */
{ 0x8086, 0x0F21, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata_byt },
/* SATA Controller IDE (Coleto Creek) */
{ 0x8086, 0x23a6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+ /* SATA Controller IDE (9 Series) */
+ { 0x8086, 0x8c88, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata_snb },
+ /* SATA Controller IDE (9 Series) */
+ { 0x8086, 0x8c89, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata_snb },
+ /* SATA Controller IDE (9 Series) */
+ { 0x8086, 0x8c80, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
+ /* SATA Controller IDE (9 Series) */
+ { 0x8086, 0x8c81, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
{ } /* terminate list */
};
* Note: Original code is ata_bus_softreset().
*/
-static unsigned int scc_bus_softreset(struct ata_port *ap, unsigned int devmask,
+static int scc_bus_softreset(struct ata_port *ap, unsigned int devmask,
unsigned long deadline)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
udelay(20);
out_be32(ioaddr->ctl_addr, ap->ctl);
- scc_wait_after_reset(&ap->link, devmask, deadline);
-
- return 0;
+ return scc_wait_after_reset(&ap->link, devmask, deadline);
}
/**
{
struct ata_port *ap = link->ap;
unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS;
- unsigned int devmask = 0, err_mask;
+ unsigned int devmask = 0;
+ int rc;
u8 err;
DPRINTK("ENTER\n");
/* issue bus reset */
DPRINTK("about to softreset, devmask=%x\n", devmask);
- err_mask = scc_bus_softreset(ap, devmask, deadline);
- if (err_mask) {
- ata_port_err(ap, "SRST failed (err_mask=0x%x)\n", err_mask);
+ rc = scc_bus_softreset(ap, devmask, deadline);
+ if (rc) {
+ ata_port_err(ap, "SRST failed (err_mask=0x%x)\n", rc);
return -EIO;
}
bool regmap_volatile(struct regmap *map, unsigned int reg)
{
- if (!regmap_readable(map, reg))
+ if (!map->format.format_write && !regmap_readable(map, reg))
return false;
if (map->volatile_reg)
}
ast->vga2_clone = false;
} else {
- ast->chip = 2000;
+ ast->chip = AST2000;
DRM_INFO("AST 2000 detected\n");
}
}
DRM_DEBUG_KMS("Set default to SSC at %dMHz\n", dev_priv->lvds_ssc_freq);
}
-static int __init intel_no_opregion_vbt_callback(const struct dmi_system_id *id)
+static int intel_no_opregion_vbt_callback(const struct dmi_system_id *id)
{
DRM_DEBUG_KMS("Falling back to manually reading VBT from "
"VBIOS ROM for %s\n",
.destroy = intel_encoder_destroy,
};
-static int __init intel_no_crt_dmi_callback(const struct dmi_system_id *id)
+static int intel_no_crt_dmi_callback(const struct dmi_system_id *id)
{
DRM_INFO("Skipping CRT initialization for %s\n", id->ident);
return 1;
.destroy = intel_encoder_destroy,
};
-static int __init intel_no_lvds_dmi_callback(const struct dmi_system_id *id)
+static int intel_no_lvds_dmi_callback(const struct dmi_system_id *id)
{
DRM_INFO("Skipping LVDS initialization for %s\n", id->ident);
return 1;
}
}
+ /* Enforce ordering by reading HEAD register back */
+ I915_READ_HEAD(ring);
+
/* Initialize the ring. This must happen _after_ we've cleared the ring
* registers with the above sequence (the readback of the HEAD registers
* also enforces ordering), otherwise the hw might lose the new ring
struct drm_device *dev = encoder->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
+ /* Prevents vblank waits from timing out in intel_tv_detect_type() */
+ intel_wait_for_vblank(encoder->base.dev,
+ to_intel_crtc(encoder->base.crtc)->pipe);
+
I915_WRITE(TV_CTL, I915_READ(TV_CTL) | TV_ENC_ENABLE);
}
}
}
+ /* Fujitsu D3003-S2 board lists DVI-I as DVI-I and VGA */
+ if ((dev->pdev->device == 0x9805) &&
+ (dev->pdev->subsystem_vendor == 0x1734) &&
+ (dev->pdev->subsystem_device == 0x11bd)) {
+ if (*connector_type == DRM_MODE_CONNECTOR_VGA)
+ return false;
+ }
return true;
}
"adm1032",
"adm1030",
"max6649",
- "lm64",
+ "lm63", /* lm64 */
"f75375",
"asc7xxx",
};
"adm1032",
"adm1030",
"max6649",
- "lm64",
+ "lm63", /* lm64 */
"f75375",
"RV6xx",
"RV770",
struct tilcdc_drm_private *priv = dev->dev_private;
struct tilcdc_module *mod, *cur;
+ drm_fbdev_cma_fini(priv->fbdev);
drm_kms_helper_poll_fini(dev);
drm_mode_config_cleanup(dev);
drm_vblank_cleanup(dev);
static void __exit tilcdc_drm_fini(void)
{
DBG("fini");
- tilcdc_tfp410_fini();
- tilcdc_slave_fini();
- tilcdc_panel_fini();
platform_driver_unregister(&tilcdc_platform_driver);
+ tilcdc_panel_fini();
+ tilcdc_slave_fini();
+ tilcdc_tfp410_fini();
}
late_initcall(tilcdc_drm_init);
static void panel_connector_destroy(struct drm_connector *connector)
{
struct panel_connector *panel_connector = to_panel_connector(connector);
+ drm_sysfs_connector_remove(connector);
drm_connector_cleanup(connector);
kfree(panel_connector);
}
{
struct panel_module *panel_mod = to_panel_module(mod);
- if (panel_mod->timings) {
+ if (panel_mod->timings)
display_timings_release(panel_mod->timings);
- kfree(panel_mod->timings);
- }
tilcdc_module_cleanup(mod);
kfree(panel_mod->info);
static void slave_connector_destroy(struct drm_connector *connector)
{
struct slave_connector *slave_connector = to_slave_connector(connector);
+ drm_sysfs_connector_remove(connector);
drm_connector_cleanup(connector);
kfree(slave_connector);
}
static void tfp410_connector_destroy(struct drm_connector *connector)
{
struct tfp410_connector *tfp410_connector = to_tfp410_connector(connector);
+ drm_sysfs_connector_remove(connector);
drm_connector_cleanup(connector);
kfree(tfp410_connector);
}
static int ttm_dma_pool_mm_shrink(struct shrinker *shrink,
struct shrink_control *sc)
{
- static atomic_t start_pool = ATOMIC_INIT(0);
+ static unsigned start_pool;
unsigned idx = 0;
- unsigned pool_offset = atomic_add_return(1, &start_pool);
+ unsigned pool_offset;
unsigned shrink_pages = sc->nr_to_scan;
struct device_pools *p;
return 0;
mutex_lock(&_manager->lock);
- pool_offset = pool_offset % _manager->npools;
+ if (!_manager->npools)
+ goto out;
+ pool_offset = ++start_pool % _manager->npools;
list_for_each_entry(p, &_manager->pools, pools) {
unsigned nr_free;
p->pool->dev_name, p->pool->name, current->pid,
nr_free, shrink_pages);
}
+out:
mutex_unlock(&_manager->lock);
/* return estimated number of unused pages in pool */
return ttm_dma_pool_get_num_unused_pages();
mutex_lock(&dev_priv->hw_mutex);
+ vmw_write(dev_priv, SVGA_REG_SYNC, SVGA_SYNC_GENERIC);
while (vmw_read(dev_priv, SVGA_REG_BUSY) != 0)
- vmw_write(dev_priv, SVGA_REG_SYNC, SVGA_SYNC_GENERIC);
+ ;
dev_priv->last_read_seqno = ioread32(fifo_mem + SVGA_FIFO_FENCE);
struct dj_receiver_dev *djrcv_dev = hid_get_drvdata(hdev);
struct dj_report *dj_report = (struct dj_report *) data;
unsigned long flags;
- bool report_processed = false;
dbg_hid("%s, size:%d\n", __func__, size);
* device (via hid_input_report() ) and return 1 so hid-core does not do
* anything else with it.
*/
+
+ /* case 1) */
+ if (data[0] != REPORT_ID_DJ_SHORT)
+ return false;
+
if ((dj_report->device_index < DJ_DEVICE_INDEX_MIN) ||
(dj_report->device_index > DJ_DEVICE_INDEX_MAX)) {
- dev_err(&hdev->dev, "%s: invalid device index:%d\n",
+ /*
+ * Device index is wrong, bail out.
+ * This driver can ignore safely the receiver notifications,
+ * so ignore those reports too.
+ */
+ if (dj_report->device_index != DJ_RECEIVER_INDEX)
+ dev_err(&hdev->dev, "%s: invalid device index:%d\n",
__func__, dj_report->device_index);
return false;
}
spin_lock_irqsave(&djrcv_dev->lock, flags);
- if (dj_report->report_id == REPORT_ID_DJ_SHORT) {
- switch (dj_report->report_type) {
- case REPORT_TYPE_NOTIF_DEVICE_PAIRED:
- case REPORT_TYPE_NOTIF_DEVICE_UNPAIRED:
- logi_dj_recv_queue_notification(djrcv_dev, dj_report);
- break;
- case REPORT_TYPE_NOTIF_CONNECTION_STATUS:
- if (dj_report->report_params[CONNECTION_STATUS_PARAM_STATUS] ==
- STATUS_LINKLOSS) {
- logi_dj_recv_forward_null_report(djrcv_dev, dj_report);
- }
- break;
- default:
- logi_dj_recv_forward_report(djrcv_dev, dj_report);
+ switch (dj_report->report_type) {
+ case REPORT_TYPE_NOTIF_DEVICE_PAIRED:
+ case REPORT_TYPE_NOTIF_DEVICE_UNPAIRED:
+ logi_dj_recv_queue_notification(djrcv_dev, dj_report);
+ break;
+ case REPORT_TYPE_NOTIF_CONNECTION_STATUS:
+ if (dj_report->report_params[CONNECTION_STATUS_PARAM_STATUS] ==
+ STATUS_LINKLOSS) {
+ logi_dj_recv_forward_null_report(djrcv_dev, dj_report);
}
- report_processed = true;
+ break;
+ default:
+ logi_dj_recv_forward_report(djrcv_dev, dj_report);
}
spin_unlock_irqrestore(&djrcv_dev->lock, flags);
- return report_processed;
+ return true;
}
static int logi_dj_probe(struct hid_device *hdev,
#define DJ_MAX_PAIRED_DEVICES 6
#define DJ_MAX_NUMBER_NOTIFICATIONS 8
+#define DJ_RECEIVER_INDEX 0
#define DJ_DEVICE_INDEX_MIN 1
#define DJ_DEVICE_INDEX_MAX 6
if (size < 4 || ((size - 4) % 9) != 0)
return 0;
npoints = (size - 4) / 9;
+ if (npoints > 15) {
+ hid_warn(hdev, "invalid size value (%d) for TRACKPAD_REPORT_ID\n",
+ size);
+ return 0;
+ }
msc->ntouches = 0;
for (ii = 0; ii < npoints; ii++)
magicmouse_emit_touch(msc, ii, data + ii * 9 + 4);
if (size < 6 || ((size - 6) % 8) != 0)
return 0;
npoints = (size - 6) / 8;
+ if (npoints > 15) {
+ hid_warn(hdev, "invalid size value (%d) for MOUSE_REPORT_ID\n",
+ size);
+ return 0;
+ }
msc->ntouches = 0;
for (ii = 0; ii < npoints; ii++)
magicmouse_emit_touch(msc, ii, data + ii * 8 + 6);
if (!data)
return 1;
+ if (size > 64) {
+ hid_warn(hdev, "invalid size value (%d) for picolcd raw event\n",
+ size);
+ return 0;
+ }
+
if (report->id == REPORT_KEY_STATE) {
if (data->input_keys)
ret = picolcd_raw_keypad(data, report, raw_data+1, size-1);
unsigned twi_cwgr_reg;
struct at91_twi_pdata *pdata;
bool use_dma;
+ bool recv_len_abort;
struct at91_twi_dma dma;
};
*dev->buf = at91_twi_read(dev, AT91_TWI_RHR) & 0xff;
--dev->buf_len;
+ /* return if aborting, we only needed to read RHR to clear RXRDY*/
+ if (dev->recv_len_abort)
+ return;
+
/* handle I2C_SMBUS_BLOCK_DATA */
if (unlikely(dev->msg->flags & I2C_M_RECV_LEN)) {
- dev->msg->flags &= ~I2C_M_RECV_LEN;
- dev->buf_len += *dev->buf;
- dev->msg->len = dev->buf_len + 1;
- dev_dbg(dev->dev, "received block length %d\n", dev->buf_len);
+ /* ensure length byte is a valid value */
+ if (*dev->buf <= I2C_SMBUS_BLOCK_MAX && *dev->buf > 0) {
+ dev->msg->flags &= ~I2C_M_RECV_LEN;
+ dev->buf_len += *dev->buf;
+ dev->msg->len = dev->buf_len + 1;
+ dev_dbg(dev->dev, "received block length %d\n",
+ dev->buf_len);
+ } else {
+ /* abort and send the stop by reading one more byte */
+ dev->recv_len_abort = true;
+ dev->buf_len = 1;
+ }
}
/* send stop if second but last byte has been read */
}
}
- ret = wait_for_completion_interruptible_timeout(&dev->cmd_complete,
- dev->adapter.timeout);
+ ret = wait_for_completion_io_timeout(&dev->cmd_complete,
+ dev->adapter.timeout);
if (ret == 0) {
dev_err(dev->dev, "controller timed out\n");
at91_init_twi_bus(dev);
ret = -EIO;
goto error;
}
+ if (dev->recv_len_abort) {
+ dev_err(dev->dev, "invalid smbus block length recvd\n");
+ ret = -EPROTO;
+ goto error;
+ }
+
dev_dbg(dev->dev, "transfer complete\n");
return 0;
dev->buf_len = m_start->len;
dev->buf = m_start->buf;
dev->msg = m_start;
+ dev->recv_len_abort = false;
ret = at91_do_twi_transfer(dev);
goto error_free_irq;
/* select default trigger */
- indio_dev->trig = sigma_delta->trig;
+ indio_dev->trig = iio_trigger_get(sigma_delta->trig);
return 0;
dev_err(&indio_dev->dev, "failed to register iio trigger.\n");
goto iio_trigger_register_error;
}
- indio_dev->trig = sdata->trig;
+ indio_dev->trig = iio_trigger_get(sdata->trig);
return 0;
goto error_free_irq;
/* select default trigger */
- indio_dev->trig = st->trig;
+ indio_dev->trig = iio_trigger_get(st->trig);
return 0;
ret = iio_trigger_register(st->trig);
if (ret)
goto error_free_irq;
- indio_dev->trig = st->trig;
+ indio_dev->trig = iio_trigger_get(st->trig);
return 0;
index = of_property_match_string(np, "io-channel-names",
name);
chan = of_iio_channel_get(np, index);
- if (!IS_ERR(chan))
+ if (!IS_ERR(chan) || PTR_ERR(chan) == -EPROBE_DEFER)
break;
else if (name && index >= 0) {
pr_err("ERROR: could not get IIO channel %s:%s(%i)\n",
#define ST_MAGN_FS_AVL_5600MG 5600
#define ST_MAGN_FS_AVL_8000MG 8000
#define ST_MAGN_FS_AVL_8100MG 8100
-#define ST_MAGN_FS_AVL_10000MG 10000
+#define ST_MAGN_FS_AVL_12000MG 12000
+#define ST_MAGN_FS_AVL_16000MG 16000
/* CUSTOM VALUES FOR SENSOR 1 */
#define ST_MAGN_1_WAI_EXP 0x3c
#define ST_MAGN_1_FS_AVL_4700_VAL 0x05
#define ST_MAGN_1_FS_AVL_5600_VAL 0x06
#define ST_MAGN_1_FS_AVL_8100_VAL 0x07
-#define ST_MAGN_1_FS_AVL_1300_GAIN_XY 1100
-#define ST_MAGN_1_FS_AVL_1900_GAIN_XY 855
-#define ST_MAGN_1_FS_AVL_2500_GAIN_XY 670
-#define ST_MAGN_1_FS_AVL_4000_GAIN_XY 450
-#define ST_MAGN_1_FS_AVL_4700_GAIN_XY 400
-#define ST_MAGN_1_FS_AVL_5600_GAIN_XY 330
-#define ST_MAGN_1_FS_AVL_8100_GAIN_XY 230
-#define ST_MAGN_1_FS_AVL_1300_GAIN_Z 980
-#define ST_MAGN_1_FS_AVL_1900_GAIN_Z 760
-#define ST_MAGN_1_FS_AVL_2500_GAIN_Z 600
-#define ST_MAGN_1_FS_AVL_4000_GAIN_Z 400
-#define ST_MAGN_1_FS_AVL_4700_GAIN_Z 355
-#define ST_MAGN_1_FS_AVL_5600_GAIN_Z 295
-#define ST_MAGN_1_FS_AVL_8100_GAIN_Z 205
+#define ST_MAGN_1_FS_AVL_1300_GAIN_XY 909
+#define ST_MAGN_1_FS_AVL_1900_GAIN_XY 1169
+#define ST_MAGN_1_FS_AVL_2500_GAIN_XY 1492
+#define ST_MAGN_1_FS_AVL_4000_GAIN_XY 2222
+#define ST_MAGN_1_FS_AVL_4700_GAIN_XY 2500
+#define ST_MAGN_1_FS_AVL_5600_GAIN_XY 3030
+#define ST_MAGN_1_FS_AVL_8100_GAIN_XY 4347
+#define ST_MAGN_1_FS_AVL_1300_GAIN_Z 1020
+#define ST_MAGN_1_FS_AVL_1900_GAIN_Z 1315
+#define ST_MAGN_1_FS_AVL_2500_GAIN_Z 1666
+#define ST_MAGN_1_FS_AVL_4000_GAIN_Z 2500
+#define ST_MAGN_1_FS_AVL_4700_GAIN_Z 2816
+#define ST_MAGN_1_FS_AVL_5600_GAIN_Z 3389
+#define ST_MAGN_1_FS_AVL_8100_GAIN_Z 4878
#define ST_MAGN_1_MULTIREAD_BIT false
/* CUSTOM VALUES FOR SENSOR 2 */
#define ST_MAGN_2_FS_MASK 0x60
#define ST_MAGN_2_FS_AVL_4000_VAL 0x00
#define ST_MAGN_2_FS_AVL_8000_VAL 0x01
-#define ST_MAGN_2_FS_AVL_10000_VAL 0x02
-#define ST_MAGN_2_FS_AVL_4000_GAIN 430
-#define ST_MAGN_2_FS_AVL_8000_GAIN 230
-#define ST_MAGN_2_FS_AVL_10000_GAIN 230
+#define ST_MAGN_2_FS_AVL_12000_VAL 0x02
+#define ST_MAGN_2_FS_AVL_16000_VAL 0x03
+#define ST_MAGN_2_FS_AVL_4000_GAIN 146
+#define ST_MAGN_2_FS_AVL_8000_GAIN 292
+#define ST_MAGN_2_FS_AVL_12000_GAIN 438
+#define ST_MAGN_2_FS_AVL_16000_GAIN 584
#define ST_MAGN_2_MULTIREAD_BIT false
#define ST_MAGN_2_OUT_X_L_ADDR 0x28
#define ST_MAGN_2_OUT_Y_L_ADDR 0x2a
.gain = ST_MAGN_2_FS_AVL_8000_GAIN,
},
[2] = {
- .num = ST_MAGN_FS_AVL_10000MG,
- .value = ST_MAGN_2_FS_AVL_10000_VAL,
- .gain = ST_MAGN_2_FS_AVL_10000_GAIN,
+ .num = ST_MAGN_FS_AVL_12000MG,
+ .value = ST_MAGN_2_FS_AVL_12000_VAL,
+ .gain = ST_MAGN_2_FS_AVL_12000_GAIN,
+ },
+ [3] = {
+ .num = ST_MAGN_FS_AVL_16000MG,
+ .value = ST_MAGN_2_FS_AVL_16000_VAL,
+ .gain = ST_MAGN_2_FS_AVL_16000_GAIN,
},
},
},
init_completion(&isert_conn->conn_wait);
init_completion(&isert_conn->conn_wait_comp_err);
kref_init(&isert_conn->conn_kref);
- kref_get(&isert_conn->conn_kref);
mutex_init(&isert_conn->conn_mutex);
cma_id->context = isert_conn;
static void
isert_connected_handler(struct rdma_cm_id *cma_id)
{
- return;
+ struct isert_conn *isert_conn = cma_id->context;
+
+ kref_get(&isert_conn->conn_kref);
}
static void
wake_up:
complete(&isert_conn->conn_wait);
- isert_put_conn(isert_conn);
}
static void
wait_for_completion(&isert_conn->conn_wait_comp_err);
wait_for_completion(&isert_conn->conn_wait);
+ isert_put_conn(isert_conn);
}
static void isert_free_conn(struct iscsi_conn *conn)
{
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LG Electronics"),
- DMI_MATCH(DMI_PRODUCT_NAME, "LW25-B7HV"),
- },
- .callback = atkbd_deactivate_fixup,
- },
- {
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "LG Electronics"),
- DMI_MATCH(DMI_PRODUCT_NAME, "P1-J273B"),
},
.callback = atkbd_deactivate_fixup,
},
if (param[1] == 0)
return true;
+ /*
+ * Some models have a revision higher then 20. Meaning param[2] may
+ * be 10 or 20, skip the rates check for these.
+ */
+ if (param[0] == 0x46 && (param[1] & 0xef) == 0x0f && param[2] < 40)
+ return true;
+
for (i = 0; i < ARRAY_SIZE(rates); i++)
if (param[2] == rates[i])
return false;
((buf[0] & 0x04) >> 1) |
((buf[3] & 0x04) >> 2));
+ if ((SYN_CAP_ADV_GESTURE(priv->ext_cap_0c) ||
+ SYN_CAP_IMAGE_SENSOR(priv->ext_cap_0c)) &&
+ hw->w == 2) {
+ synaptics_parse_agm(buf, priv, hw);
+ return 1;
+ }
+
+ hw->x = (((buf[3] & 0x10) << 8) |
+ ((buf[1] & 0x0f) << 8) |
+ buf[4]);
+ hw->y = (((buf[3] & 0x20) << 7) |
+ ((buf[1] & 0xf0) << 4) |
+ buf[5]);
+ hw->z = buf[2];
+
hw->left = (buf[0] & 0x01) ? 1 : 0;
hw->right = (buf[0] & 0x02) ? 1 : 0;
- if (SYN_CAP_CLICKPAD(priv->ext_cap_0c)) {
+ if (SYN_CAP_FORCEPAD(priv->ext_cap_0c)) {
+ /*
+ * ForcePads, like Clickpads, use middle button
+ * bits to report primary button clicks.
+ * Unfortunately they report primary button not
+ * only when user presses on the pad above certain
+ * threshold, but also when there are more than one
+ * finger on the touchpad, which interferes with
+ * out multi-finger gestures.
+ */
+ if (hw->z == 0) {
+ /* No contacts */
+ priv->press = priv->report_press = false;
+ } else if (hw->w >= 4 && ((buf[0] ^ buf[3]) & 0x01)) {
+ /*
+ * Single-finger touch with pressure above
+ * the threshold. If pressure stays long
+ * enough, we'll start reporting primary
+ * button. We rely on the device continuing
+ * sending data even if finger does not
+ * move.
+ */
+ if (!priv->press) {
+ priv->press_start = jiffies;
+ priv->press = true;
+ } else if (time_after(jiffies,
+ priv->press_start +
+ msecs_to_jiffies(50))) {
+ priv->report_press = true;
+ }
+ } else {
+ priv->press = false;
+ }
+
+ hw->left = priv->report_press;
+
+ } else if (SYN_CAP_CLICKPAD(priv->ext_cap_0c)) {
/*
* Clickpad's button is transmitted as middle button,
* however, since it is primary button, we will report
hw->down = ((buf[0] ^ buf[3]) & 0x02) ? 1 : 0;
}
- if ((SYN_CAP_ADV_GESTURE(priv->ext_cap_0c) ||
- SYN_CAP_IMAGE_SENSOR(priv->ext_cap_0c)) &&
- hw->w == 2) {
- synaptics_parse_agm(buf, priv, hw);
- return 1;
- }
-
- hw->x = (((buf[3] & 0x10) << 8) |
- ((buf[1] & 0x0f) << 8) |
- buf[4]);
- hw->y = (((buf[3] & 0x20) << 7) |
- ((buf[1] & 0xf0) << 4) |
- buf[5]);
- hw->z = buf[2];
-
if (SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap) &&
((buf[0] ^ buf[3]) & 0x02)) {
switch (SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap) & ~0x01) {
* 2 0x08 image sensor image sensor tracks 5 fingers, but only
* reports 2.
* 2 0x20 report min query 0x0f gives min coord reported
+ * 2 0x80 forcepad forcepad is a variant of clickpad that
+ * does not have physical buttons but rather
+ * uses pressure above certain threshold to
+ * report primary clicks. Forcepads also have
+ * clickpad bit set.
*/
#define SYN_CAP_CLICKPAD(ex0c) ((ex0c) & 0x100000) /* 1-button ClickPad */
#define SYN_CAP_CLICKPAD2BTN(ex0c) ((ex0c) & 0x000100) /* 2-button ClickPad */
#define SYN_CAP_ADV_GESTURE(ex0c) ((ex0c) & 0x080000)
#define SYN_CAP_REDUCED_FILTERING(ex0c) ((ex0c) & 0x000400)
#define SYN_CAP_IMAGE_SENSOR(ex0c) ((ex0c) & 0x000800)
+#define SYN_CAP_FORCEPAD(ex0c) ((ex0c) & 0x008000)
/* synaptics modes query bits */
#define SYN_MODE_ABSOLUTE(m) ((m) & (1 << 7))
*/
struct synaptics_hw_state agm;
bool agm_pending; /* new AGM packet received */
+
+ /* ForcePad handling */
+ unsigned long press_start;
+ bool press;
+ bool report_press;
};
void synaptics_module_init(void);
DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv4 Notebook PC"),
},
},
+ {
+ /* Avatar AVIU-145A6 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Intel"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "IC4I"),
+ },
+ },
{ }
};
DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv4 Notebook PC"),
},
},
+ {
+ /* Fujitsu U574 laptop */
+ /* https://bugzilla.kernel.org/show_bug.cgi?id=69731 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK U574"),
+ },
+ },
{ }
};
#include <linux/init.h>
#include <linux/serio.h>
#include <linux/tty.h>
+#include <linux/compat.h>
MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
MODULE_DESCRIPTION("Input device TTY line discipline");
return 0;
}
+static void serport_set_type(struct tty_struct *tty, unsigned long type)
+{
+ struct serport *serport = tty->disc_data;
+
+ serport->id.proto = type & 0x000000ff;
+ serport->id.id = (type & 0x0000ff00) >> 8;
+ serport->id.extra = (type & 0x00ff0000) >> 16;
+}
+
/*
* serport_ldisc_ioctl() allows to set the port protocol, and device ID
*/
-static int serport_ldisc_ioctl(struct tty_struct * tty, struct file * file, unsigned int cmd, unsigned long arg)
+static int serport_ldisc_ioctl(struct tty_struct *tty, struct file *file,
+ unsigned int cmd, unsigned long arg)
{
- struct serport *serport = (struct serport*) tty->disc_data;
- unsigned long type;
-
if (cmd == SPIOCSTYPE) {
+ unsigned long type;
+
if (get_user(type, (unsigned long __user *) arg))
return -EFAULT;
- serport->id.proto = type & 0x000000ff;
- serport->id.id = (type & 0x0000ff00) >> 8;
- serport->id.extra = (type & 0x00ff0000) >> 16;
+ serport_set_type(tty, type);
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+#ifdef CONFIG_COMPAT
+#define COMPAT_SPIOCSTYPE _IOW('q', 0x01, compat_ulong_t)
+static long serport_ldisc_compat_ioctl(struct tty_struct *tty,
+ struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ if (cmd == COMPAT_SPIOCSTYPE) {
+ void __user *uarg = compat_ptr(arg);
+ compat_ulong_t compat_type;
+
+ if (get_user(compat_type, (compat_ulong_t __user *)uarg))
+ return -EFAULT;
+ serport_set_type(tty, compat_type);
return 0;
}
return -EINVAL;
}
+#endif
static void serport_ldisc_write_wakeup(struct tty_struct * tty)
{
.close = serport_ldisc_close,
.read = serport_ldisc_read,
.ioctl = serport_ldisc_ioctl,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = serport_ldisc_compat_ioctl,
+#endif
.receive_buf = serport_ldisc_receive,
.write_wakeup = serport_ldisc_write_wakeup
};
unsigned int key_size, opt_params;
unsigned long long tmpll;
int ret;
+ size_t iv_size_padding;
struct dm_arg_set as;
const char *opt_string;
char dummy;
cc->dmreq_start = sizeof(struct ablkcipher_request);
cc->dmreq_start += crypto_ablkcipher_reqsize(any_tfm(cc));
- cc->dmreq_start = ALIGN(cc->dmreq_start, crypto_tfm_ctx_alignment());
- cc->dmreq_start += crypto_ablkcipher_alignmask(any_tfm(cc)) &
- ~(crypto_tfm_ctx_alignment() - 1);
+ cc->dmreq_start = ALIGN(cc->dmreq_start, __alignof__(struct dm_crypt_request));
+
+ if (crypto_ablkcipher_alignmask(any_tfm(cc)) < CRYPTO_MINALIGN) {
+ /* Allocate the padding exactly */
+ iv_size_padding = -(cc->dmreq_start + sizeof(struct dm_crypt_request))
+ & crypto_ablkcipher_alignmask(any_tfm(cc));
+ } else {
+ /*
+ * If the cipher requires greater alignment than kmalloc
+ * alignment, we don't know the exact position of the
+ * initialization vector. We must assume worst case.
+ */
+ iv_size_padding = crypto_ablkcipher_alignmask(any_tfm(cc));
+ }
cc->req_pool = mempool_create_kmalloc_pool(MIN_IOS, cc->dmreq_start +
- sizeof(struct dm_crypt_request) + cc->iv_size);
+ sizeof(struct dm_crypt_request) + iv_size_padding + cc->iv_size);
if (!cc->req_pool) {
ti->error = "Cannot allocate crypt request mempool";
goto bad;
d--;
rdev = conf->mirrors[d].rdev;
if (rdev &&
- test_bit(In_sync, &rdev->flags))
+ !test_bit(Faulty, &rdev->flags))
r1_sync_page_io(rdev, sect, s,
conf->tmppage, WRITE);
}
d--;
rdev = conf->mirrors[d].rdev;
if (rdev &&
- test_bit(In_sync, &rdev->flags)) {
+ !test_bit(Faulty, &rdev->flags)) {
if (r1_sync_page_io(rdev, sect, s,
conf->tmppage, READ)) {
atomic_add(s, &rdev->corrected_errors);
setup.addr = ADDR_UNSET;
setup.type = cx->options.tuner;
setup.mode_mask = T_ANALOG_TV; /* matches TV tuners */
+ setup.config = NULL;
if (cx->options.radio > 0)
setup.mode_mask |= T_RADIO;
setup.tuner_callback = (setup.type == TUNER_XC2028) ?
atomic_add(buffers_added, &(pool->available));
}
+/*
+ * The final 8 bytes of the buffer list is a counter of frames dropped
+ * because there was not a buffer in the buffer list capable of holding
+ * the frame.
+ */
+static void ibmveth_update_rx_no_buffer(struct ibmveth_adapter *adapter)
+{
+ __be64 *p = adapter->buffer_list_addr + 4096 - 8;
+
+ adapter->rx_no_buffer = be64_to_cpup(p);
+}
+
/* replenish routine */
static void ibmveth_replenish_task(struct ibmveth_adapter *adapter)
{
ibmveth_replenish_buffer_pool(adapter, pool);
}
- adapter->rx_no_buffer = *(u64 *)(((char*)adapter->buffer_list_addr) +
- 4096 - 8);
+ ibmveth_update_rx_no_buffer(adapter);
}
/* empty and free ana buffer pool - also used to do cleanup in error paths */
free_irq(netdev->irq, netdev);
- adapter->rx_no_buffer = *(u64 *)(((char *)adapter->buffer_list_addr) +
- 4096 - 8);
+ ibmveth_update_rx_no_buffer(adapter);
ibmveth_cleanup(adapter);
atomic_t rx_work_urbs;
atomic_t rx_pool_urbs;
kernel_ulong_t features;
+ bool usb_ep_cmd_is_bulk;
/* firmware settings */
struct completion fw_load_wait;
goto err_free;
}
- usb_fill_int_urb(urb, ar->udev, usb_sndintpipe(ar->udev,
- AR9170_USB_EP_CMD), cmd, cmd->hdr.len + 4,
- carl9170_usb_cmd_complete, ar, 1);
+ if (ar->usb_ep_cmd_is_bulk)
+ usb_fill_bulk_urb(urb, ar->udev,
+ usb_sndbulkpipe(ar->udev, AR9170_USB_EP_CMD),
+ cmd, cmd->hdr.len + 4,
+ carl9170_usb_cmd_complete, ar);
+ else
+ usb_fill_int_urb(urb, ar->udev,
+ usb_sndintpipe(ar->udev, AR9170_USB_EP_CMD),
+ cmd, cmd->hdr.len + 4,
+ carl9170_usb_cmd_complete, ar, 1);
if (free_buf)
urb->transfer_flags |= URB_FREE_BUFFER;
static int carl9170_usb_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
+ struct usb_endpoint_descriptor *ep;
struct ar9170 *ar;
struct usb_device *udev;
- int err;
+ int i, err;
err = usb_reset_device(interface_to_usbdev(intf));
if (err)
ar->intf = intf;
ar->features = id->driver_info;
+ /* We need to remember the type of endpoint 4 because it differs
+ * between high- and full-speed configuration. The high-speed
+ * configuration specifies it as interrupt and the full-speed
+ * configuration as bulk endpoint. This information is required
+ * later when sending urbs to that endpoint.
+ */
+ for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; ++i) {
+ ep = &intf->cur_altsetting->endpoint[i].desc;
+
+ if (usb_endpoint_num(ep) == AR9170_USB_EP_CMD &&
+ usb_endpoint_dir_out(ep) &&
+ usb_endpoint_type(ep) == USB_ENDPOINT_XFER_BULK)
+ ar->usb_ep_cmd_is_bulk = true;
+ }
+
usb_set_intfdata(intf, ar);
SET_IEEE80211_DEV(ar->hw, &intf->dev);
/* recalculate basic rates */
iwl_calc_basic_rates(priv, ctx);
+ /*
+ * force CTS-to-self frames protection if RTS-CTS is not preferred
+ * one aggregation protection method
+ */
+ if (!priv->hw_params.use_rts_for_aggregation)
+ ctx->staging.flags |= RXON_FLG_SELF_CTS_EN;
+
if ((ctx->vif && ctx->vif->bss_conf.use_short_slot) ||
!(ctx->staging.flags & RXON_FLG_BAND_24G_MSK))
ctx->staging.flags |= RXON_FLG_SHORT_SLOT_MSK;
else
ctx->staging.flags &= ~RXON_FLG_TGG_PROTECT_MSK;
+ if (bss_conf->use_cts_prot)
+ ctx->staging.flags |= RXON_FLG_SELF_CTS_EN;
+ else
+ ctx->staging.flags &= ~RXON_FLG_SELF_CTS_EN;
+
memcpy(ctx->staging.bssid_addr, bss_conf->bssid, ETH_ALEN);
if (vif->type == NL80211_IFTYPE_AP ||
{RTL_USB_DEVICE(0x0bda, 0x5088, rtl92cu_hal_cfg)}, /*Thinkware-CC&C*/
{RTL_USB_DEVICE(0x0df6, 0x0052, rtl92cu_hal_cfg)}, /*Sitecom - Edimax*/
{RTL_USB_DEVICE(0x0df6, 0x005c, rtl92cu_hal_cfg)}, /*Sitecom - Edimax*/
+ {RTL_USB_DEVICE(0x0df6, 0x0070, rtl92cu_hal_cfg)}, /*Sitecom - 150N */
{RTL_USB_DEVICE(0x0df6, 0x0077, rtl92cu_hal_cfg)}, /*Sitecom-WLA2100V2*/
{RTL_USB_DEVICE(0x0eb0, 0x9071, rtl92cu_hal_cfg)}, /*NO Brand - Etop*/
{RTL_USB_DEVICE(0x4856, 0x0091, rtl92cu_hal_cfg)}, /*NetweeN - Feixun*/
targets->sens_res =
be16_to_cpu(*(u16 *)&skb->data[MICROREAD_EMCF_A_ATQA]);
targets->sel_res = skb->data[MICROREAD_EMCF_A_SAK];
- memcpy(targets->nfcid1, &skb->data[MICROREAD_EMCF_A_UID],
- skb->data[MICROREAD_EMCF_A_LEN]);
targets->nfcid1_len = skb->data[MICROREAD_EMCF_A_LEN];
+ if (targets->nfcid1_len > sizeof(targets->nfcid1)) {
+ r = -EINVAL;
+ goto exit_free;
+ }
+ memcpy(targets->nfcid1, &skb->data[MICROREAD_EMCF_A_UID],
+ targets->nfcid1_len);
break;
case MICROREAD_GATE_ID_MREAD_ISO_A_3:
targets->supported_protocols =
targets->sens_res =
be16_to_cpu(*(u16 *)&skb->data[MICROREAD_EMCF_A3_ATQA]);
targets->sel_res = skb->data[MICROREAD_EMCF_A3_SAK];
- memcpy(targets->nfcid1, &skb->data[MICROREAD_EMCF_A3_UID],
- skb->data[MICROREAD_EMCF_A3_LEN]);
targets->nfcid1_len = skb->data[MICROREAD_EMCF_A3_LEN];
+ if (targets->nfcid1_len > sizeof(targets->nfcid1)) {
+ r = -EINVAL;
+ goto exit_free;
+ }
+ memcpy(targets->nfcid1, &skb->data[MICROREAD_EMCF_A3_UID],
+ targets->nfcid1_len);
break;
case MICROREAD_GATE_ID_MREAD_ISO_B:
targets->supported_protocols = NFC_PROTO_ISO14443_B_MASK;
return NULL;
}
+ if (data_size > ISCSI_DEF_MAX_RECV_SEG_LEN) {
+ iscsi_conn_printk(KERN_ERR, conn, "Invalid buffer len of %u for login task. Max len is %u\n", data_size, ISCSI_DEF_MAX_RECV_SEG_LEN);
+ return NULL;
+ }
+
task = conn->login_task;
} else {
if (session->state != ISCSI_STATE_LOGGED_IN)
return NULL;
+ if (data_size != 0) {
+ iscsi_conn_printk(KERN_ERR, conn, "Can not send data buffer of len %u for op 0x%x\n", data_size, opcode);
+ return NULL;
+ }
+
BUG_ON(conn->c_stage == ISCSI_CONN_INITIAL_STAGE);
BUG_ON(conn->c_stage == ISCSI_CONN_STOPPED);
ret = iio_trigger_register(st->trig);
/* select default trigger */
- indio_dev->trig = st->trig;
+ indio_dev->trig = iio_trigger_get(st->trig);
if (ret)
goto error_free_irq;
{
struct iscsi_conn *l_conn;
struct iscsi_session *sess = conn->sess;
+ bool conn_found = false;
if (!sess)
return;
list_for_each_entry(l_conn, &sess->sess_conn_list, conn_list) {
if (l_conn->cid == cid) {
iscsit_inc_conn_usage_count(l_conn);
+ conn_found = true;
break;
}
}
spin_unlock_bh(&sess->conn_lock);
- if (!l_conn)
+ if (!conn_found)
return;
if (l_conn->sock)
param_list = kzalloc(sizeof(struct iscsi_param_list), GFP_KERNEL);
if (!param_list) {
pr_err("Unable to allocate memory for struct iscsi_param_list.\n");
- goto err_out;
+ return -1;
}
INIT_LIST_HEAD(¶m_list->param_list);
INIT_LIST_HEAD(¶m_list->extra_response_list);
dma->rx_buf = dma_alloc_coherent(dma->rxchan->device->dev, dma->rx_size,
&dma->rx_addr, GFP_KERNEL);
- if (!dma->rx_buf) {
- dma_release_channel(dma->rxchan);
- dma_release_channel(dma->txchan);
- return -ENOMEM;
- }
+ if (!dma->rx_buf)
+ goto err;
/* TX buffer */
dma->tx_addr = dma_map_single(dma->txchan->device->dev,
p->port.state->xmit.buf,
UART_XMIT_SIZE,
DMA_TO_DEVICE);
+ if (dma_mapping_error(dma->txchan->device->dev, dma->tx_addr)) {
+ dma_free_coherent(dma->rxchan->device->dev, dma->rx_size,
+ dma->rx_buf, dma->rx_addr);
+ goto err;
+ }
dev_dbg_ratelimited(p->port.dev, "got both dma channels\n");
return 0;
+err:
+ dma_release_channel(dma->rxchan);
+ dma_release_channel(dma->txchan);
+
+ return -ENOMEM;
}
EXPORT_SYMBOL_GPL(serial8250_request_dma);
/* Tell khubd to disconnect the device or
* check for a new connection
*/
- if (udev || (portstatus & USB_PORT_STAT_CONNECTION))
+ if (udev || (portstatus & USB_PORT_STAT_CONNECTION) ||
+ (portstatus & USB_PORT_STAT_OVERCURRENT))
set_bit(port1, hub->change_bits);
} else if (portstatus & USB_PORT_STAT_ENABLE) {
hub = list_entry(tmp, struct usb_hub, event_list);
kref_get(&hub->kref);
+ hdev = hub->hdev;
+ usb_get_dev(hdev);
spin_unlock_irq(&hub_event_lock);
- hdev = hub->hdev;
hub_dev = hub->intfdev;
intf = to_usb_interface(hub_dev);
dev_dbg(hub_dev, "state %d ports %d chg %04x evt %04x\n",
usb_autopm_put_interface(intf);
loop_disconnected:
usb_unlock_device(hdev);
+ usb_put_dev(hdev);
kref_put(&hub->kref, hub_release);
} /* end while (1) */
{
struct dwc3 *dwc = platform_get_drvdata(pdev);
- usb_phy_set_suspend(dwc->usb2_phy, 1);
- usb_phy_set_suspend(dwc->usb3_phy, 1);
-
- pm_runtime_put(&pdev->dev);
- pm_runtime_disable(&pdev->dev);
-
dwc3_debugfs_exit(dwc);
switch (dwc->mode) {
dwc3_event_buffers_cleanup(dwc);
dwc3_free_event_buffers(dwc);
+
+ usb_phy_set_suspend(dwc->usb2_phy, 1);
+ usb_phy_set_suspend(dwc->usb3_phy, 1);
+
dwc3_core_exit(dwc);
+ pm_runtime_put_sync(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+
return 0;
}
struct dwc3_omap *omap = platform_get_drvdata(pdev);
dwc3_omap_disable_irqs(omap);
+ device_for_each_child(&pdev->dev, NULL, dwc3_omap_remove_core);
pm_runtime_put_sync(&pdev->dev);
pm_runtime_disable(&pdev->dev);
- device_for_each_child(&pdev->dev, NULL, dwc3_omap_remove_core);
return 0;
}
}
qh->exception = 1;
- if (ehci->rh_state < EHCI_RH_RUNNING)
- qh->qh_state = QH_STATE_IDLE;
switch (qh->qh_state) {
case QH_STATE_LINKED:
case QH_STATE_COMPLETING:
}
/* Updates Link Status for super Speed port */
-static void xhci_hub_report_link_state(u32 *status, u32 status_reg)
+static void xhci_hub_report_link_state(struct xhci_hcd *xhci,
+ u32 *status, u32 status_reg)
{
u32 pls = status_reg & PORT_PLS_MASK;
* in which sometimes the port enters compliance mode
* caused by a delay on the host-device negotiation.
*/
- if (pls == USB_SS_PORT_LS_COMP_MOD)
+ if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
+ (pls == USB_SS_PORT_LS_COMP_MOD))
pls |= USB_PORT_STAT_CONNECTION;
}
}
/* Update Port Link State for super speed ports*/
if (hcd->speed == HCD_USB3) {
- xhci_hub_report_link_state(&status, temp);
+ xhci_hub_report_link_state(xhci, &status, temp);
/*
* Verify if all USB3 Ports Have entered U0 already.
* Delete Compliance Mode Timer if so.
}
num_ports = HCS_MAX_PORTS(xhci->hcs_params1);
- for (i = 0; i < num_ports; i++) {
+ for (i = 0; i < num_ports && xhci->rh_bw; i++) {
struct xhci_interval_bw_table *bwt = &xhci->rh_bw[i].bw_table;
for (j = 0; j < XHCI_MAX_INTERVAL; j++) {
struct list_head *ep = &bwt->interval_bw[j].endpoints;
int ret;
spin_lock_irqsave(&xhci->lock, flags);
- if (max_exit_latency == xhci->devs[udev->slot_id]->current_mel) {
+
+ virt_dev = xhci->devs[udev->slot_id];
+
+ /*
+ * virt_dev might not exists yet if xHC resumed from hibernate (S4) and
+ * xHC was re-initialized. Exit latency will be set later after
+ * hub_port_finish_reset() is done and xhci->devs[] are re-allocated
+ */
+
+ if (!virt_dev || max_exit_latency == virt_dev->current_mel) {
spin_unlock_irqrestore(&xhci->lock, flags);
return 0;
}
/* Attempt to issue an Evaluate Context command to change the MEL. */
- virt_dev = xhci->devs[udev->slot_id];
command = xhci->lpm_command;
xhci_slot_copy(xhci, command->in_ctx, virt_dev->out_ctx);
spin_unlock_irqrestore(&xhci->lock, flags);
{ USB_DEVICE(0x0711, 0x0918) },
{ USB_DEVICE(0x0711, 0x0920) },
{ USB_DEVICE(0x0711, 0x0950) },
+ { USB_DEVICE(0x0711, 0x5200) },
{ USB_DEVICE(0x182d, 0x021c) },
{ USB_DEVICE(0x182d, 0x0269) },
{ }
{ USB_DEVICE(FTDI_VID, FTDI_NDI_AURORA_SCU_PID),
.driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
{ USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
+ { USB_DEVICE(NOVITUS_VID, NOVITUS_BONO_E_PID) },
{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_S03_PID) },
{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_59_PID) },
{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_57A_PID) },
#define TELLDUS_VID 0x1781 /* Vendor ID */
#define TELLDUS_TELLSTICK_PID 0x0C30 /* RF control dongle 433 MHz using FT232RL */
+/*
+ * NOVITUS printers
+ */
+#define NOVITUS_VID 0x1a28
+#define NOVITUS_BONO_E_PID 0x6010
+
/*
* RT Systems programming cables for various ham radios
*/
#define ZTE_PRODUCT_MF622 0x0001
#define ZTE_PRODUCT_MF628 0x0015
#define ZTE_PRODUCT_MF626 0x0031
-#define ZTE_PRODUCT_MC2718 0xffe8
#define ZTE_PRODUCT_AC2726 0xfff1
+#define ZTE_PRODUCT_CDMA_TECH 0xfffe
+#define ZTE_PRODUCT_AC8710T 0xffff
+#define ZTE_PRODUCT_MC2718 0xffe8
+#define ZTE_PRODUCT_AD3812 0xffeb
+#define ZTE_PRODUCT_MC2716 0xffed
#define BENQ_VENDOR_ID 0x04a5
#define BENQ_PRODUCT_H10 0x4068
#define INOVIA_VENDOR_ID 0x20a6
#define INOVIA_SEW858 0x1105
+/* VIA Telecom */
+#define VIATELECOM_VENDOR_ID 0x15eb
+#define VIATELECOM_PRODUCT_CDS7 0x0001
+
/* some devices interfaces need special handling due to a number of reasons */
enum option_blacklist_reason {
OPTION_BLACKLIST_NONE = 0,
.reserved = BIT(4),
};
+static const struct option_blacklist_info zte_ad3812_z_blacklist = {
+ .sendsetup = BIT(0) | BIT(1) | BIT(2),
+};
+
static const struct option_blacklist_info zte_mc2718_z_blacklist = {
.sendsetup = BIT(1) | BIT(2) | BIT(3) | BIT(4),
};
+static const struct option_blacklist_info zte_mc2716_z_blacklist = {
+ .sendsetup = BIT(1) | BIT(2) | BIT(3),
+};
+
static const struct option_blacklist_info huawei_cdc12_blacklist = {
.reserved = BIT(1) | BIT(2),
};
{ USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1012, 0xff) },
{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC650) },
{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) },
+ { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6000)}, /* ZTE AC8700 */
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x0023)}, /* ONYX 3G device */
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000)}, /* SIMCom SIM5218 */
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff93, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff94, 0xff, 0xff, 0xff) },
- /* NOTE: most ZTE CDMA devices should be driven by zte_ev, not option */
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710T, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2718, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&zte_mc2718_z_blacklist },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AD3812, 0xff, 0xff, 0xff),
+ .driver_info = (kernel_ulong_t)&zte_ad3812_z_blacklist },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2716, 0xff, 0xff, 0xff),
+ .driver_info = (kernel_ulong_t)&zte_mc2716_z_blacklist },
{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x01) },
{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x05) },
{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x86, 0x10) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) },
{ USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) },
{ USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) },
{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e01, 0xff, 0xff, 0xff) }, /* D-Link DWM-152/C1 */
{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e02, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/C1 */
{ USB_DEVICE(INOVIA_VENDOR_ID, INOVIA_SEW858) },
+ { USB_DEVICE(VIATELECOM_VENDOR_ID, VIATELECOM_PRODUCT_CDS7) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);
dev_dbg(dev, "%s: type %x req %x\n", __func__,
req_pkt->bRequestType, req_pkt->bRequest);
}
+ } else if (status == -ENOENT || status == -ESHUTDOWN) {
+ dev_dbg(dev, "%s: urb stopped: %d\n", __func__, status);
} else
dev_err(dev, "%s: error %d\n", __func__, status);
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_GPRS) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_HCR331) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MOTOROLA) },
+ { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_ZTEK) },
{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) },
{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) },
{ USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID) },
#define PL2303_PRODUCT_ID_GPRS 0x0609
#define PL2303_PRODUCT_ID_HCR331 0x331a
#define PL2303_PRODUCT_ID_MOTOROLA 0x0307
+#define PL2303_PRODUCT_ID_ZTEK 0xe1f1
#define ATEN_VENDOR_ID 0x0557
#define ATEN_VENDOR_ID2 0x0547
/* Sierra Wireless HSPA Non-Composite Device */
{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6892, 0xFF, 0xFF, 0xFF)},
{ USB_DEVICE(0x1199, 0x6893) }, /* Sierra Wireless Device */
- { USB_DEVICE(0x1199, 0x68A3), /* Sierra Wireless Direct IP modems */
+ /* Sierra Wireless Direct IP modems */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x68A3, 0xFF, 0xFF, 0xFF),
+ .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
+ },
+ { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x68AA, 0xFF, 0xFF, 0xFF),
.driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
},
/* AT&T Direct IP LTE modems */
{ USB_DEVICE_AND_INTERFACE_INFO(0x0F3D, 0x68AA, 0xFF, 0xFF, 0xFF),
.driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
},
- { USB_DEVICE(0x0f3d, 0x68A3), /* Airprime/Sierra Wireless Direct IP modems */
+ /* Airprime/Sierra Wireless Direct IP modems */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x0F3D, 0x68A3, 0xFF, 0xFF, 0xFF),
.driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
},
if (usb_endpoint_is_bulk_in(endpoint)) {
/* we found a bulk in endpoint */
dev_dbg(ddev, "found bulk in on endpoint %d\n", i);
- bulk_in_endpoint[num_bulk_in] = endpoint;
- ++num_bulk_in;
+ if (num_bulk_in < MAX_NUM_PORTS) {
+ bulk_in_endpoint[num_bulk_in] = endpoint;
+ ++num_bulk_in;
+ }
}
if (usb_endpoint_is_bulk_out(endpoint)) {
/* we found a bulk out endpoint */
dev_dbg(ddev, "found bulk out on endpoint %d\n", i);
- bulk_out_endpoint[num_bulk_out] = endpoint;
- ++num_bulk_out;
+ if (num_bulk_out < MAX_NUM_PORTS) {
+ bulk_out_endpoint[num_bulk_out] = endpoint;
+ ++num_bulk_out;
+ }
}
if (usb_endpoint_is_int_in(endpoint)) {
/* we found a interrupt in endpoint */
dev_dbg(ddev, "found interrupt in on endpoint %d\n", i);
- interrupt_in_endpoint[num_interrupt_in] = endpoint;
- ++num_interrupt_in;
+ if (num_interrupt_in < MAX_NUM_PORTS) {
+ interrupt_in_endpoint[num_interrupt_in] =
+ endpoint;
+ ++num_interrupt_in;
+ }
}
if (usb_endpoint_is_int_out(endpoint)) {
/* we found an interrupt out endpoint */
dev_dbg(ddev, "found interrupt out on endpoint %d\n", i);
- interrupt_out_endpoint[num_interrupt_out] = endpoint;
- ++num_interrupt_out;
+ if (num_interrupt_out < MAX_NUM_PORTS) {
+ interrupt_out_endpoint[num_interrupt_out] =
+ endpoint;
+ ++num_interrupt_out;
+ }
}
}
if (usb_endpoint_is_int_in(endpoint)) {
/* we found a interrupt in endpoint */
dev_dbg(ddev, "found interrupt in for Prolific device on separate interface\n");
- interrupt_in_endpoint[num_interrupt_in] = endpoint;
- ++num_interrupt_in;
+ if (num_interrupt_in < MAX_NUM_PORTS) {
+ interrupt_in_endpoint[num_interrupt_in] = endpoint;
+ ++num_interrupt_in;
+ }
}
}
}
num_ports = type->num_ports;
}
+ if (num_ports > MAX_NUM_PORTS) {
+ dev_warn(ddev, "too many ports requested: %d\n", num_ports);
+ num_ports = MAX_NUM_PORTS;
+ }
+
serial->num_ports = num_ports;
serial->num_bulk_in = num_bulk_in;
serial->num_bulk_out = num_bulk_out;
}
static const struct usb_device_id id_table[] = {
- /* AC8710, AC8710T */
- { USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xffff, 0xff, 0xff, 0xff) },
- /* AC8700 */
- { USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xfffe, 0xff, 0xff, 0xff) },
- /* MG880 */
- { USB_DEVICE(0x19d2, 0xfffd) },
- { USB_DEVICE(0x19d2, 0xfffc) },
- { USB_DEVICE(0x19d2, 0xfffb) },
- /* AC8710_V3 */
+ { USB_DEVICE(0x19d2, 0xffec) },
+ { USB_DEVICE(0x19d2, 0xffee) },
{ USB_DEVICE(0x19d2, 0xfff6) },
{ USB_DEVICE(0x19d2, 0xfff7) },
{ USB_DEVICE(0x19d2, 0xfff8) },
{ USB_DEVICE(0x19d2, 0xfff9) },
- { USB_DEVICE(0x19d2, 0xffee) },
- /* AC2716, MC2716 */
- { USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xffed, 0xff, 0xff, 0xff) },
- /* AD3812 */
- { USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xffeb, 0xff, 0xff, 0xff) },
- { USB_DEVICE(0x19d2, 0xffec) },
- { USB_DEVICE(0x05C6, 0x3197) },
- { USB_DEVICE(0x05C6, 0x6000) },
- { USB_DEVICE(0x05C6, 0x9008) },
+ { USB_DEVICE(0x19d2, 0xfffb) },
+ { USB_DEVICE(0x19d2, 0xfffc) },
+ /* MG880 */
+ { USB_DEVICE(0x19d2, 0xfffd) },
{ },
};
MODULE_DEVICE_TABLE(usb, id_table);
"PhotoSmart R707",
USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_CAPACITY),
+UNUSUAL_DEV( 0x03f3, 0x0001, 0x0000, 0x9999,
+ "Adaptec",
+ "USBConnect 2000",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
+ US_FL_SCM_MULT_TARG ),
+
/* Reported by Sebastian Kapfer <sebastian_kapfer@gmx.net>
* and Olaf Hering <olh@suse.de> (different bcd's, same vendor/product)
* for USB floppies that need the SINGLE_LUN enforcement.
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_SINGLE_LUN ),
+UNUSUAL_DEV( 0x059b, 0x0040, 0x0100, 0x0100,
+ "Iomega",
+ "Jaz USB Adapter",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_SINGLE_LUN ),
+
/* Reported by <Hendryk.Pfeiffer@gmx.de> */
UNUSUAL_DEV( 0x059f, 0x0643, 0x0000, 0x0000,
"LaCie",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_NOT_LOCKABLE),
+UNUSUAL_DEV( 0x085a, 0x0026, 0x0100, 0x0133,
+ "Xircom",
+ "PortGear USB-SCSI (Mac USB Dock)",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
+ US_FL_SCM_MULT_TARG ),
+
+UNUSUAL_DEV( 0x085a, 0x0028, 0x0100, 0x0133,
+ "Xircom",
+ "PortGear USB to SCSI Converter",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
+ US_FL_SCM_MULT_TARG ),
+
/* Submitted by Jan De Luyck <lkml@kcore.org> */
UNUSUAL_DEV( 0x08bd, 0x1100, 0x0000, 0x0000,
"CITIZEN",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE | US_FL_SANE_SENSE ),
+/* Entrega Technologies U1-SC25 (later Xircom PortGear PGSCSI)
+ * and Mac USB Dock USB-SCSI */
+UNUSUAL_DEV( 0x1645, 0x0007, 0x0100, 0x0133,
+ "Entrega Technologies",
+ "USB to SCSI Converter",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
+ US_FL_SCM_MULT_TARG ),
+
/* Reported by Robert Schedel <r.schedel@yahoo.de>
* Note: this is a 'super top' device like the above 14cd/6600 device */
UNUSUAL_DEV( 0x1652, 0x6600, 0x0201, 0x0201,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_BULK_IGNORE_TAG | US_FL_MAX_SECTORS_64 ),
+UNUSUAL_DEV( 0x1822, 0x0001, 0x0000, 0x9999,
+ "Ariston Technologies",
+ "iConnect USB to SCSI adapter",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
+ US_FL_SCM_MULT_TARG ),
+
/* Reported by Hans de Goede <hdegoede@redhat.com>
* These Appotech controllers are found in Picture Frames, they provide a
* (buggy) emulation of a cdrom drive which contains the windows software
bh = page_buffers(page);
if (bh->b_size == size) {
end_block = init_page_buffers(page, bdev,
- index << sizebits, size);
+ (sector_t)index << sizebits,
+ size);
goto done;
}
if (!try_to_free_buffers(page))
*/
spin_lock(&inode->i_mapping->private_lock);
link_dev_buffers(page, bh);
- end_block = init_page_buffers(page, bdev, index << sizebits, size);
+ end_block = init_page_buffers(page, bdev, (sector_t)index << sizebits,
+ size);
spin_unlock(&inode->i_mapping->private_lock);
done:
ret = (block < end_block) ? 1 : -ENXIO;
const char *, u32 *);
int (*set_acl)(struct cifs_ntsd *, __u32, struct inode *, const char *,
int);
+ /* check if we need to issue closedir */
+ bool (*dir_needs_close)(struct cifsFileInfo *);
};
struct smb_version_values {
cifs_dbg(FYI, "Freeing private data in close dir\n");
spin_lock(&cifs_file_list_lock);
- if (!cfile->srch_inf.endOfSearch && !cfile->invalidHandle) {
+ if (server->ops->dir_needs_close(cfile)) {
cfile->invalidHandle = true;
spin_unlock(&cifs_file_list_lock);
if (server->ops->close_dir)
unlink_target:
/* Try unlinking the target dentry if it's not negative */
if (target_dentry->d_inode && (rc == -EACCES || rc == -EEXIST)) {
- tmprc = cifs_unlink(target_dir, target_dentry);
+ if (S_ISDIR(target_dentry->d_inode->i_mode))
+ tmprc = cifs_rmdir(target_dir, target_dentry);
+ else
+ tmprc = cifs_unlink(target_dir, target_dentry);
if (tmprc)
goto cifs_rename_exit;
rc = cifs_do_rename(xid, source_dentry, from_name,
/* close and restart search */
cifs_dbg(FYI, "search backing up - close and restart search\n");
spin_lock(&cifs_file_list_lock);
- if (!cfile->srch_inf.endOfSearch && !cfile->invalidHandle) {
+ if (server->ops->dir_needs_close(cfile)) {
cfile->invalidHandle = true;
spin_unlock(&cifs_file_list_lock);
if (server->ops->close_dir)
(__u8)type, wait, 0);
}
+static bool
+cifs_dir_needs_close(struct cifsFileInfo *cfile)
+{
+ return !cfile->srch_inf.endOfSearch && !cfile->invalidHandle;
+}
+
struct smb_version_operations smb1_operations = {
.send_cancel = send_nt_cancel,
.compare_fids = cifs_compare_fids,
.mand_lock = cifs_mand_lock,
.mand_unlock_range = cifs_unlock_range,
.push_mand_locks = cifs_push_mandatory_locks,
+ .dir_needs_close = cifs_dir_needs_close,
#ifdef CONFIG_CIFS_XATTR
.query_all_EAs = CIFSSMBQAllEAs,
.set_EA = CIFSSMBSetEA,
{STATUS_BREAKPOINT, -EIO, "STATUS_BREAKPOINT"},
{STATUS_SINGLE_STEP, -EIO, "STATUS_SINGLE_STEP"},
{STATUS_BUFFER_OVERFLOW, -EIO, "STATUS_BUFFER_OVERFLOW"},
- {STATUS_NO_MORE_FILES, -EIO, "STATUS_NO_MORE_FILES"},
+ {STATUS_NO_MORE_FILES, -ENODATA, "STATUS_NO_MORE_FILES"},
{STATUS_WAKE_SYSTEM_DEBUGGER, -EIO, "STATUS_WAKE_SYSTEM_DEBUGGER"},
{STATUS_HANDLES_CLOSED, -EIO, "STATUS_HANDLES_CLOSED"},
{STATUS_NO_INHERITANCE, -EIO, "STATUS_NO_INHERITANCE"},
get_random_bytes(fid->lease_key, SMB2_LEASE_KEY_SIZE);
}
+static bool
+smb2_dir_needs_close(struct cifsFileInfo *cfile)
+{
+ return !cfile->invalidHandle;
+}
+
struct smb_version_operations smb21_operations = {
.compare_fids = smb2_compare_fids,
.setup_request = smb2_setup_request,
.set_lease_key = smb2_set_lease_key,
.new_lease_key = smb2_new_lease_key,
.calc_signature = smb2_calc_signature,
+ .dir_needs_close = smb2_dir_needs_close,
};
.set_lease_key = smb2_set_lease_key,
.new_lease_key = smb2_new_lease_key,
.calc_signature = smb3_calc_signature,
+ .dir_needs_close = smb2_dir_needs_close,
};
struct smb_version_values smb20_values = {
rsp = (struct smb2_query_directory_rsp *)iov[0].iov_base;
if (rc) {
+ if (rc == -ENODATA && rsp->hdr.Status == STATUS_NO_MORE_FILES) {
+ srch_inf->endOfSearch = true;
+ rc = 0;
+ }
cifs_stats_fail_inc(tcon, SMB2_QUERY_DIRECTORY_HE);
goto qdir_exit;
}
else
cifs_dbg(VFS, "illegal search buffer type\n");
- if (rsp->hdr.Status == STATUS_NO_MORE_FILES)
- srch_inf->endOfSearch = 1;
- else
- srch_inf->endOfSearch = 0;
-
return rc;
qdir_exit:
int count = 0;
ext2_fsblk_t first_block = 0;
+ BUG_ON(maxblocks == 0);
+
depth = ext2_block_to_path(inode,iblock,offsets,&blocks_to_boundary);
if (depth == 0)
int rc;
memset(&tmp, 0, sizeof(struct buffer_head));
+ tmp.b_size = 1 << inode->i_blkbits;
rc = ext2_get_block(inode, pgoff, &tmp, create);
*result = tmp.b_blocknr;
error = make_socks(serv, net);
if (error < 0)
- goto err_socks;
+ goto err_bind;
set_grace_period(net);
dprintk("lockd_up_net: per-net data created; net=%p\n", net);
return 0;
-err_socks:
- svc_rpcb_cleanup(serv, net);
err_bind:
ln->nlmsvc_users--;
return error;
spin_lock(&nn->nfs_client_lock);
list_for_each_entry(pos, &nn->nfs_client_list, cl_share_link) {
+
+ if (pos->rpc_ops != new->rpc_ops)
+ continue;
+
+ if (pos->cl_proto != new->cl_proto)
+ continue;
+
+ if (pos->cl_minorversion != new->cl_minorversion)
+ continue;
+
/* If "pos" isn't marked ready, we can't trust the
* remaining fields in "pos" */
if (pos->cl_cons_state > NFS_CS_READY) {
if (pos->cl_cons_state != NFS_CS_READY)
continue;
- if (pos->rpc_ops != new->rpc_ops)
- continue;
-
- if (pos->cl_proto != new->cl_proto)
- continue;
-
- if (pos->cl_minorversion != new->cl_minorversion)
- continue;
-
if (pos->cl_clientid != new->cl_clientid)
continue;
spin_lock(&nn->nfs_client_lock);
list_for_each_entry(pos, &nn->nfs_client_list, cl_share_link) {
+
+ if (pos->rpc_ops != new->rpc_ops)
+ continue;
+
+ if (pos->cl_proto != new->cl_proto)
+ continue;
+
+ if (pos->cl_minorversion != new->cl_minorversion)
+ continue;
+
/* If "pos" isn't marked ready, we can't trust the
* remaining fields in "pos", especially the client
* ID and serverowner fields. Wait for CREATE_SESSION
if (pos->cl_cons_state != NFS_CS_READY)
continue;
- if (pos->rpc_ops != new->rpc_ops)
- continue;
-
- if (pos->cl_proto != new->cl_proto)
- continue;
-
- if (pos->cl_minorversion != new->cl_minorversion)
- continue;
-
if (!nfs4_match_clientids(pos, new))
continue;
is_rdwr = test_bit(NFS_O_RDWR_STATE, &state->flags);
is_rdonly = test_bit(NFS_O_RDONLY_STATE, &state->flags);
is_wronly = test_bit(NFS_O_WRONLY_STATE, &state->flags);
- /* Calculate the current open share mode */
- calldata->arg.fmode = 0;
- if (is_rdonly || is_rdwr)
- calldata->arg.fmode |= FMODE_READ;
- if (is_wronly || is_rdwr)
- calldata->arg.fmode |= FMODE_WRITE;
/* Calculate the change in open mode */
+ calldata->arg.fmode = 0;
if (state->n_rdwr == 0) {
- if (state->n_rdonly == 0) {
- call_close |= is_rdonly || is_rdwr;
- calldata->arg.fmode &= ~FMODE_READ;
- }
- if (state->n_wronly == 0) {
- call_close |= is_wronly || is_rdwr;
- calldata->arg.fmode &= ~FMODE_WRITE;
- }
- }
+ if (state->n_rdonly == 0)
+ call_close |= is_rdonly;
+ else if (is_rdonly)
+ calldata->arg.fmode |= FMODE_READ;
+ if (state->n_wronly == 0)
+ call_close |= is_wronly;
+ else if (is_wronly)
+ calldata->arg.fmode |= FMODE_WRITE;
+ } else if (is_rdwr)
+ calldata->arg.fmode |= FMODE_READ|FMODE_WRITE;
+
+ if (calldata->arg.fmode == 0)
+ call_close |= is_rdwr;
+
if (!nfs4_valid_open_stateid(state))
call_close = 0;
spin_unlock(&state->owner->so_lock);
#include <linux/buffer_head.h>
#include <linux/gfp.h>
#include <linux/mpage.h>
+#include <linux/pagemap.h>
#include <linux/writeback.h>
#include <linux/aio.h>
#include "nilfs.h"
static int nilfs_set_page_dirty(struct page *page)
{
+ struct inode *inode = page->mapping->host;
int ret = __set_page_dirty_nobuffers(page);
if (page_has_buffers(page)) {
- struct inode *inode = page->mapping->host;
unsigned nr_dirty = 0;
struct buffer_head *bh, *head;
if (nr_dirty)
nilfs_set_file_dirty(inode, nr_dirty);
+ } else if (ret) {
+ unsigned nr_dirty = 1 << (PAGE_CACHE_SHIFT - inode->i_blkbits);
+
+ nilfs_set_file_dirty(inode, nr_dirty);
}
return ret;
}
{
struct {
struct file_handle handle;
- u8 pad[64];
+ u8 pad[MAX_HANDLE_SZ];
} f;
int size, ret, i;
size = f.handle.handle_bytes >> 2;
ret = exportfs_encode_inode_fh(inode, (struct fid *)f.handle.f_handle, &size, 0);
- if ((ret == 255) || (ret == -ENOSPC)) {
+ if ((ret == FILEID_INVALID) || (ret < 0)) {
WARN_ONCE(1, "Can't encode file handler for inotify: %d\n", ret);
return 0;
}
clear_bit(bit, res->refmap);
}
-
-void dlm_lockres_grab_inflight_ref(struct dlm_ctxt *dlm,
+static void __dlm_lockres_grab_inflight_ref(struct dlm_ctxt *dlm,
struct dlm_lock_resource *res)
{
- assert_spin_locked(&res->spinlock);
-
res->inflight_locks++;
mlog(0, "%s: res %.*s, inflight++: now %u, %ps()\n", dlm->name,
__builtin_return_address(0));
}
+void dlm_lockres_grab_inflight_ref(struct dlm_ctxt *dlm,
+ struct dlm_lock_resource *res)
+{
+ assert_spin_locked(&res->spinlock);
+ __dlm_lockres_grab_inflight_ref(dlm, res);
+}
+
void dlm_lockres_drop_inflight_ref(struct dlm_ctxt *dlm,
struct dlm_lock_resource *res)
{
/* finally add the lockres to its hash bucket */
__dlm_insert_lockres(dlm, res);
- /* Grab inflight ref to pin the resource */
- spin_lock(&res->spinlock);
- dlm_lockres_grab_inflight_ref(dlm, res);
- spin_unlock(&res->spinlock);
+ /* since this lockres is new it doesn't not require the spinlock */
+ __dlm_lockres_grab_inflight_ref(dlm, res);
/* get an extra ref on the mle in case this is a BLOCK
* if so, the creator of the BLOCK may try to put the last
put_device(&trig->dev);
}
-static inline void iio_trigger_get(struct iio_trigger *trig)
+static inline struct iio_trigger *iio_trigger_get(struct iio_trigger *trig)
{
get_device(&trig->dev);
__module_get(trig->ops->owner);
+
+ return trig;
}
/**
#define create_freezable_workqueue(name) \
alloc_workqueue((name), WQ_FREEZABLE | WQ_UNBOUND | WQ_MEM_RECLAIM, 1)
#define create_singlethread_workqueue(name) \
- alloc_workqueue((name), WQ_UNBOUND | WQ_MEM_RECLAIM, 1)
+ alloc_ordered_workqueue("%s", WQ_MEM_RECLAIM, name)
extern void destroy_workqueue(struct workqueue_struct *wq);
*/
if (ctx->is_active) {
raw_spin_unlock_irq(&ctx->lock);
+ /*
+ * Reload the task pointer, it might have been changed by
+ * a concurrent perf_event_context_sched_out().
+ */
+ task = ctx->task;
goto retry;
}
*/
if (ctx->is_active) {
raw_spin_unlock_irq(&ctx->lock);
+ /*
+ * Reload the task pointer, it might have been changed by
+ * a concurrent perf_event_context_sched_out().
+ */
+ task = ctx->task;
goto retry;
}
goto bad_fork_free_pid;
}
- if (clone_flags & CLONE_THREAD) {
- current->signal->nr_threads++;
- atomic_inc(¤t->signal->live);
- atomic_inc(¤t->signal->sigcnt);
- p->group_leader = current->group_leader;
- list_add_tail_rcu(&p->thread_group, &p->group_leader->thread_group);
- }
-
if (likely(p->pid)) {
ptrace_init_task(p, (clone_flags & CLONE_PTRACE) || trace);
list_add_tail_rcu(&p->tasks, &init_task.tasks);
__this_cpu_inc(process_counts);
} else {
+ current->signal->nr_threads++;
+ atomic_inc(¤t->signal->live);
+ atomic_inc(¤t->signal->sigcnt);
+ p->group_leader = current->group_leader;
+ list_add_tail_rcu(&p->thread_group,
+ &p->group_leader->thread_group);
list_add_tail_rcu(&p->thread_node,
&p->signal->thread_head);
}
*/
static int kcmp_ptr(void *v1, void *v2, enum kcmp_type type)
{
- long ret;
+ long t1, t2;
- ret = kptr_obfuscate((long)v1, type) - kptr_obfuscate((long)v2, type);
+ t1 = kptr_obfuscate((long)v1, type);
+ t2 = kptr_obfuscate((long)v2, type);
- return (ret < 0) | ((ret > 0) << 1);
+ return (t1 < t2) | ((t1 > t2) << 1);
}
/* The caller must have pinned the task */
{
char *s = buf;
#ifdef CONFIG_SUSPEND
- int i;
+ suspend_state_t i;
+
+ for (i = PM_SUSPEND_MIN; i < PM_SUSPEND_MAX; i++)
+ if (pm_states[i].state)
+ s += sprintf(s,"%s ", pm_states[i].label);
- for (i = 0; i < PM_SUSPEND_MAX; i++) {
- if (pm_states[i] && valid_state(i))
- s += sprintf(s,"%s ", pm_states[i]);
- }
#endif
#ifdef CONFIG_HIBERNATION
s += sprintf(s, "%s\n", "disk");
{
#ifdef CONFIG_SUSPEND
suspend_state_t state = PM_SUSPEND_MIN;
- const char * const *s;
+ struct pm_sleep_state *s;
#endif
char *p;
int len;
#ifdef CONFIG_SUSPEND
for (s = &pm_states[state]; state < PM_SUSPEND_MAX; s++, state++)
- if (*s && len == strlen(*s) && !strncmp(buf, *s, len))
- return state;
+ if (s->state && len == strlen(s->label)
+ && !strncmp(buf, s->label, len))
+ return s->state;
#endif
return PM_SUSPEND_ON;
#ifdef CONFIG_SUSPEND
if (state < PM_SUSPEND_MAX)
- return sprintf(buf, "%s\n", valid_state(state) ?
- pm_states[state] : "error");
+ return sprintf(buf, "%s\n", pm_states[state].state ?
+ pm_states[state].label : "error");
#endif
#ifdef CONFIG_HIBERNATION
return sprintf(buf, "disk\n");
unsigned int, char *);
#ifdef CONFIG_SUSPEND
+struct pm_sleep_state {
+ const char *label;
+ suspend_state_t state;
+};
+
/* kernel/power/suspend.c */
-extern const char *const pm_states[];
+extern struct pm_sleep_state pm_states[];
-extern bool valid_state(suspend_state_t state);
extern int suspend_devices_and_enter(suspend_state_t state);
-//<20130327> <marc.huang> merge from android kernel 3.0 - add enter_state declarition when CONFIG_SUSPEND is defined
-extern int enter_state(suspend_state_t state);
#else /* !CONFIG_SUSPEND */
static inline int suspend_devices_and_enter(suspend_state_t state)
{
return -ENOSYS;
}
-//<20130327> <marc.huang> merge from android kernel 3.0 - add enter_state definition when CONFIG_SUSPEND is undefined
-static inline int enter_state(suspend_state_t state) { return -ENOSYS; }
-static inline bool valid_state(suspend_state_t state) { return false; }
#endif /* !CONFIG_SUSPEND */
#ifdef CONFIG_PM_TEST_SUSPEND
#include "power.h"
-const char *const pm_states[PM_SUSPEND_MAX] = {
-//<20130327> <marc.huang> merge from android kernel 3.0 - add [PM_SUSPEND_ON] into pm_states
+struct pm_sleep_state pm_states[PM_SUSPEND_MAX] = {
#ifdef CONFIG_EARLYSUSPEND
- [PM_SUSPEND_ON] = "on",
+ [PM_SUSPEND_ON] = { .label = "on", },
#endif
- [PM_SUSPEND_FREEZE] = "freeze",
- [PM_SUSPEND_STANDBY] = "standby",
- [PM_SUSPEND_MEM] = "mem",
+ [PM_SUSPEND_FREEZE] = { .label = "freeze", .state = PM_SUSPEND_FREEZE },
+ [PM_SUSPEND_STANDBY] = { .label = "standby", },
+ [PM_SUSPEND_MEM] = { .label = "mem", },
};
static const struct platform_suspend_ops *suspend_ops;
}
EXPORT_SYMBOL_GPL(freeze_wake);
+static bool valid_state(suspend_state_t state)
+{
+ /*
+ * PM_SUSPEND_STANDBY and PM_SUSPEND_MEM states need low level
+ * support and need to be valid to the low level
+ * implementation, no valid callback implies that none are valid.
+ */
+ return suspend_ops && suspend_ops->valid && suspend_ops->valid(state);
+}
+
/**
* suspend_set_ops - Set the global suspend method table.
* @ops: Suspend operations to use.
*/
void suspend_set_ops(const struct platform_suspend_ops *ops)
{
+ suspend_state_t i;
+
lock_system_sleep();
+
suspend_ops = ops;
+ for (i = PM_SUSPEND_STANDBY; i <= PM_SUSPEND_MEM; i++)
+ pm_states[i].state = valid_state(i) ? i : 0;
+
unlock_system_sleep();
}
EXPORT_SYMBOL_GPL(suspend_set_ops);
-bool valid_state(suspend_state_t state)
-{
- if (state == PM_SUSPEND_FREEZE) {
-#ifdef CONFIG_PM_DEBUG
- if (pm_test_level != TEST_NONE &&
- pm_test_level != TEST_FREEZER &&
- pm_test_level != TEST_DEVICES &&
- pm_test_level != TEST_PLATFORM) {
- printk(KERN_WARNING "Unsupported pm_test mode for "
- "freeze state, please choose "
- "none/freezer/devices/platform.\n");
- return false;
- }
-#endif
- return true;
- }
- /*
- * PM_SUSPEND_STANDBY and PM_SUSPEND_MEMORY states need lowlevel
- * support and need to be valid to the lowlevel
- * implementation, no valid callback implies that none are valid.
- */
- return suspend_ops && suspend_ops->valid && suspend_ops->valid(state);
-}
-
/**
* suspend_valid_only_mem - Generic memory-only valid callback.
*
{
int error;
- if (!valid_state(state))
- return -ENODEV;
-
+ if (state == PM_SUSPEND_FREEZE) {
+#ifdef CONFIG_PM_DEBUG
+ if (pm_test_level != TEST_NONE && pm_test_level <= TEST_CPUS) {
+ pr_warning("PM: Unsupported test mode for freeze state,"
+ "please choose none/freezer/devices/platform.\n");
+ return -EAGAIN;
+ }
+#endif
+ } else if (!valid_state(state)) {
+ return -EINVAL;
+ }
if (!mutex_trylock(&pm_mutex))
return -EBUSY;
#endif
printk("done.\n");
- pr_debug("PM: Preparing system for %s sleep\n", pm_states[state]);
+ pr_debug("PM: Preparing system for %s sleep\n", pm_states[state].label);
error = suspend_prepare(state);
if (error)
goto Unlock;
if (suspend_test(TEST_FREEZER))
goto Finish;
- pr_debug("PM: Entering %s sleep\n", pm_states[state]);
+ pr_debug("PM: Entering %s sleep\n", pm_states[state].label);
pm_restrict_gfp_mask();
error = suspend_devices_and_enter(state);
pm_restore_gfp_mask();
}
if (state == PM_SUSPEND_MEM) {
- printk(info_test, pm_states[state]);
+ printk(info_test, pm_states[state].label);
status = pm_suspend(state);
if (status == -ENODEV)
state = PM_SUSPEND_STANDBY;
}
if (state == PM_SUSPEND_STANDBY) {
- printk(info_test, pm_states[state]);
+ printk(info_test, pm_states[state].label);
status = pm_suspend(state);
}
if (status < 0)
static int __init setup_test_suspend(char *value)
{
- unsigned i;
+ suspend_state_t i;
/* "=mem" ==> "mem" */
value++;
- for (i = 0; i < PM_SUSPEND_MAX; i++) {
- if (!pm_states[i])
- continue;
- if (strcmp(pm_states[i], value) != 0)
- continue;
- test_state = (__force suspend_state_t) i;
- return 0;
- }
+ for (i = PM_SUSPEND_MIN; i < PM_SUSPEND_MAX; i++)
+ if (!strcmp(pm_states[i].label, value)) {
+ test_state = pm_states[i].state;
+ return 0;
+ }
+
printk(warn_bad_state, value);
return 0;
}
/* PM is initialized by now; is that state testable? */
if (test_state == PM_SUSPEND_ON)
goto done;
- if (!valid_state(test_state)) {
- printk(warn_bad_state, pm_states[test_state]);
+ if (!pm_states[test_state].state) {
+ printk(warn_bad_state, pm_states[test_state].label);
goto done;
}
static enum alarmtimer_restart alarm_handle_timer(struct alarm *alarm,
ktime_t now)
{
+ unsigned long flags;
struct k_itimer *ptr = container_of(alarm, struct k_itimer,
it.alarm.alarmtimer);
- if (posix_timer_event(ptr, 0) != 0)
- ptr->it_overrun++;
+ enum alarmtimer_restart result = ALARMTIMER_NORESTART;
+
+ spin_lock_irqsave(&ptr->it_lock, flags);
+ if ((ptr->it_sigev_notify & ~SIGEV_THREAD_ID) != SIGEV_NONE) {
+ if (posix_timer_event(ptr, 0) != 0)
+ ptr->it_overrun++;
+ }
/* Re-add periodic timers */
if (ptr->it.alarm.interval.tv64) {
ptr->it_overrun += alarm_forward(alarm, now,
ptr->it.alarm.interval);
- return ALARMTIMER_RESTART;
+ result = ALARMTIMER_RESTART;
}
- return ALARMTIMER_NORESTART;
+ spin_unlock_irqrestore(&ptr->it_lock, flags);
+
+ return result;
}
/**
work = &cpu_buffer->irq_work;
}
- work->waiters_pending = true;
poll_wait(filp, &work->waiters, poll_table);
+ work->waiters_pending = true;
+ /*
+ * There's a tight race between setting the waiters_pending and
+ * checking if the ring buffer is empty. Once the waiters_pending bit
+ * is set, the next event will wake the task up, but we can get stuck
+ * if there's only a single event in.
+ *
+ * FIXME: Ideally, we need a memory barrier on the writer side as well,
+ * but adding a memory barrier to all events will cause too much of a
+ * performance hit in the fast path. We only need a memory barrier when
+ * the buffer goes from empty to having content. But as this race is
+ * extremely small, and it's not a problem if another event comes in, we
+ * will fix it later.
+ */
+ smp_mb();
if ((cpu == RING_BUFFER_ALL_CPUS && !ring_buffer_empty(buffer)) ||
(cpu != RING_BUFFER_ALL_CPUS && !ring_buffer_empty_cpu(buffer, cpu)))
#ifdef CONFIG_NUMA
/**
* has_intersects_mems_allowed() - check task eligiblity for kill
- * @tsk: task struct of which task to consider
+ * @start: task struct of which task to consider
* @mask: nodemask passed to page allocator for mempolicy ooms
*
* Task eligibility is determined by whether or not a candidate task, @tsk,
* shares the same mempolicy nodes as current if it is bound by such a policy
* and whether or not it has the same set of allowed cpuset nodes.
*/
-static bool has_intersects_mems_allowed(struct task_struct *tsk,
+static bool has_intersects_mems_allowed(struct task_struct *start,
const nodemask_t *mask)
{
- struct task_struct *start = tsk;
+ struct task_struct *tsk;
+ bool ret = false;
- do {
+ rcu_read_lock();
+ for_each_thread(start, tsk) {
if (mask) {
/*
* If this is a mempolicy constrained oom, tsk's
* mempolicy intersects current, otherwise it may be
* needlessly killed.
*/
- if (mempolicy_nodemask_intersects(tsk, mask))
- return true;
+ ret = mempolicy_nodemask_intersects(tsk, mask);
} else {
/*
* This is not a mempolicy constrained oom, so only
* check the mems of tsk's cpuset.
*/
- if (cpuset_mems_allowed_intersects(current, tsk))
- return true;
+ ret = cpuset_mems_allowed_intersects(current, tsk);
}
- } while_each_thread(start, tsk);
+ if (ret)
+ break;
+ }
+ rcu_read_unlock();
- return false;
+ return ret;
}
#else
static bool has_intersects_mems_allowed(struct task_struct *tsk,
*/
struct task_struct *find_lock_task_mm(struct task_struct *p)
{
- struct task_struct *t = p;
+ struct task_struct *t;
- do {
+ rcu_read_lock();
+
+ for_each_thread(p, t) {
task_lock(t);
if (likely(t->mm))
- return t;
+ goto found;
task_unlock(t);
- } while_each_thread(p, t);
+ }
+ t = NULL;
+found:
+ rcu_read_unlock();
- return NULL;
+ return t;
}
/* return true if the task is not adequate as candidate victim task. */
unsigned long chosen_points = 0;
rcu_read_lock();
- do_each_thread(g, p) {
+ for_each_process_thread(g, p) {
unsigned int points;
switch (oom_scan_process_thread(p, totalpages, nodemask,
chosen = p;
chosen_points = points;
}
- } while_each_thread(g, p);
+ }
if (chosen)
get_task_struct(chosen);
rcu_read_unlock();
{
struct task_struct *victim = p;
struct task_struct *child;
- struct task_struct *t = p;
+ struct task_struct *t;
struct mm_struct *mm;
unsigned int victim_points = 0;
static DEFINE_RATELIMIT_STATE(oom_rs, DEFAULT_RATELIMIT_INTERVAL,
* still freeing memory.
*/
read_lock(&tasklist_lock);
- do {
+ for_each_thread(p, t) {
list_for_each_entry(child, &t->children, sibling) {
unsigned int child_points;
get_task_struct(victim);
}
}
- } while_each_thread(p, t);
+ }
read_unlock(&tasklist_lock);
- rcu_read_lock();
p = find_lock_task_mm(victim);
if (!p) {
- rcu_read_unlock();
put_task_struct(victim);
return;
} else if (victim != p) {
* That thread will now get access to memory reserves since it has a
* pending fatal signal.
*/
+ rcu_read_lock();
for_each_process(p)
if (p->mm == mm && !same_thread_group(p, victim) &&
!(p->flags & PF_KTHREAD)) {
int page_start, int page_end)
{
const gfp_t gfp = GFP_KERNEL | __GFP_HIGHMEM | __GFP_COLD;
- unsigned int cpu;
+ unsigned int cpu, tcpu;
int i;
for_each_possible_cpu(cpu) {
struct page **pagep = &pages[pcpu_page_idx(cpu, i)];
*pagep = alloc_pages_node(cpu_to_node(cpu), gfp, 0);
- if (!*pagep) {
- pcpu_free_pages(chunk, pages, populated,
- page_start, page_end);
- return -ENOMEM;
- }
+ if (!*pagep)
+ goto err;
}
}
return 0;
+
+err:
+ while (--i >= page_start)
+ __free_page(pages[pcpu_page_idx(cpu, i)]);
+
+ for_each_possible_cpu(tcpu) {
+ if (tcpu == cpu)
+ break;
+ for (i = page_start; i < page_end; i++)
+ __free_page(pages[pcpu_page_idx(tcpu, i)]);
+ }
+ return -ENOMEM;
}
/**
__pcpu_unmap_pages(pcpu_chunk_addr(chunk, tcpu, page_start),
page_end - page_start);
}
+ pcpu_post_unmap_tlb_flush(chunk, page_start, page_end);
return err;
}
if (pcpu_setup_first_chunk(ai, fc) < 0)
panic("Failed to initialize percpu areas.");
+
+ pcpu_free_alloc_info(ai);
}
#endif /* CONFIG_SMP */
if (new_dentry->d_inode) {
(void) shmem_unlink(new_dir, new_dentry);
- if (they_are_dirs)
+ if (they_are_dirs) {
+ drop_nlink(new_dentry->d_inode);
drop_nlink(old_dir);
+ }
} else if (they_are_dirs) {
drop_nlink(old_dir);
inc_nlink(new_dir);
if (in_group) {
struct task_struct *t;
- rcu_read_lock();
- if (!pid_alive(task))
- goto done;
- t = task;
- do {
+ rcu_read_lock();
+ for_each_thread(task, t) {
if (vm_is_stack_for_task(t, vma)) {
ret = t->pid;
goto done;
}
- } while_each_thread(task, t);
+ }
done:
rcu_read_unlock();
}
rcu_read_unlock();
if (bss->wmm_used && bss->uapsd_supported &&
- (sdata->local->hw.flags & IEEE80211_HW_SUPPORTS_UAPSD) &&
- sdata->wmm_acm != 0xff) {
+ (sdata->local->hw.flags & IEEE80211_HW_SUPPORTS_UAPSD)) {
assoc_data->uapsd = true;
ifmgd->flags |= IEEE80211_STA_UAPSD_ENABLED;
} else {
ip_vs_control_del(cp);
if (cp->flags & IP_VS_CONN_F_NFCT) {
- ip_vs_conn_drop_conntrack(cp);
/* Do not access conntracks during subsys cleanup
* because nf_conntrack_find_get can not be used after
* conntrack cleanup for the net.
{
.hook = ip_vs_local_reply6,
.owner = THIS_MODULE,
- .pf = NFPROTO_IPV4,
+ .pf = NFPROTO_IPV6,
.hooknum = NF_INET_LOCAL_OUT,
.priority = NF_IP6_PRI_NAT_DST + 1,
},
iph->nexthdr = IPPROTO_IPV6;
iph->payload_len = old_iph->payload_len;
be16_add_cpu(&iph->payload_len, sizeof(*old_iph));
- iph->priority = old_iph->priority;
memset(&iph->flow_lbl, 0, sizeof(iph->flow_lbl));
+ ipv6_change_dsfield(iph, 0, ipv6_get_dsfield(old_iph));
iph->daddr = cp->daddr.in6;
iph->saddr = saddr;
iph->hop_limit = old_iph->hop_limit;
nf_ct_kill_acct(ct, ctinfo, skb);
return NF_ACCEPT;
}
+ /* ESTABLISHED without SEEN_REPLY, i.e. mid-connection
+ * pickup with loose=1. Avoid large ESTABLISHED timeout.
+ */
+ if (new_state == TCP_CONNTRACK_ESTABLISHED &&
+ timeout > timeouts[TCP_CONNTRACK_UNACK])
+ timeout = timeouts[TCP_CONNTRACK_UNACK];
} else if (!test_bit(IPS_ASSURED_BIT, &ct->status)
&& (old_state == TCP_CONNTRACK_SYN_RECV
|| old_state == TCP_CONNTRACK_ESTABLISHED)
* snd_info_get_line - read one line from the procfs buffer
* @buffer: the procfs buffer
* @line: the buffer to store
- * @len: the max. buffer size - 1
+ * @len: the max. buffer size
*
* Reads one line from the buffer and stores the string.
*
buffer->stop = 1;
if (c == '\n')
break;
- if (len) {
+ if (len > 1) {
len--;
*line++ = c;
}
{
struct snd_pcm_hw_params *params = arg;
snd_pcm_format_t format;
- int channels, width;
+ int channels;
+ ssize_t frame_size;
params->fifo_size = substream->runtime->hw.fifo_size;
if (!(substream->runtime->hw.info & SNDRV_PCM_INFO_FIFO_IN_FRAMES)) {
format = params_format(params);
channels = params_channels(params);
- width = snd_pcm_format_physical_width(format);
- params->fifo_size /= width * channels;
+ frame_size = snd_pcm_format_size(format, channels);
+ if (frame_size > 0)
+ params->fifo_size /= (unsigned)frame_size;
}
return 0;
}
case 0x10ec0885:
case 0x10ec0887:
/*case 0x10ec0889:*/ /* this causes an SPDIF problem */
+ case 0x10ec0900:
alc889_coef_init(codec);
break;
case 0x10ec0888:
switch (codec->vendor_id) {
case 0x10ec0882:
case 0x10ec0885:
+ case 0x10ec0900:
break;
default:
/* ALC883 and variants */
if (snd_hda_jack_tbl_get(codec, nid))
continue;
if (def_conf == AC_JACK_PORT_COMPLEX &&
- !(spec->vref_mute_led_nid == nid ||
- is_jack_detectable(codec, nid))) {
+ spec->vref_mute_led_nid != nid &&
+ is_jack_detectable(codec, nid)) {
snd_hda_jack_detect_enable_callback(codec, nid,
STAC_PWR_EVENT,
jack_update_power);
return err;
}
- stac_init_power_map(codec);
-
return 0;
}
+static int stac_build_controls(struct hda_codec *codec)
+{
+ int err = snd_hda_gen_build_controls(codec);
+
+ if (err < 0)
+ return err;
+ stac_init_power_map(codec);
+ return 0;
+}
static int stac_init(struct hda_codec *codec)
{
#endif /* CONFIG_PM */
static const struct hda_codec_ops stac_patch_ops = {
- .build_controls = snd_hda_gen_build_controls,
+ .build_controls = stac_build_controls,
.build_pcms = snd_hda_gen_build_pcms,
.init = stac_init,
.free = stac_free,
{
u32 fmt;
u32 tx_rotate = (word_length / 4) & 0x7;
- u32 rx_rotate = (32 - word_length) / 4;
u32 mask = (1ULL << word_length) - 1;
+ /*
+ * For captured data we should not rotate, inversion and masking is
+ * enoguh to get the data to the right position:
+ * Format data from bus after reverse (XRBUF)
+ * S16_LE: |LSB|MSB|xxx|xxx| |xxx|xxx|MSB|LSB|
+ * S24_3LE: |LSB|DAT|MSB|xxx| |xxx|MSB|DAT|LSB|
+ * S24_LE: |LSB|DAT|MSB|xxx| |xxx|MSB|DAT|LSB|
+ * S32_LE: |LSB|DAT|DAT|MSB| |MSB|DAT|DAT|LSB|
+ */
+ u32 rx_rotate = 0;
/*
* if s BCLK-to-LRCLK ratio has been configured via the set_clkdiv()
dir1 = opendir(PATH_SYS_NODE);
if (!dir1)
- return -1;
+ return 0;
while ((dent1 = readdir(dir1)) != NULL) {
if (dent1->d_type != DT_DIR ||
projects / GitHub / mt8127 / android_kernel_alcatel_ttab.git / commitdiff