{ 40, 0x0000 }, /* R40 - SPKOUTL volume */
{ 41, 0x0000 }, /* R41 - SPKOUTR volume */
+ { 49, 0x0010 }, /* R49 - Class D Control 1 */
{ 51, 0x0003 }, /* R51 - Class D Control 2 */
{ 56, 0x0506 }, /* R56 - Clocking 4 */
case WM8962_ALC2:
case WM8962_THERMAL_SHUTDOWN_STATUS:
case WM8962_ADDITIONAL_CONTROL_4:
- case WM8962_CLASS_D_CONTROL_1:
case WM8962_DC_SERVO_6:
case WM8962_INTERRUPT_STATUS_1:
case WM8962_INTERRUPT_STATUS_2:
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
- u16 *reg_cache = codec->reg_cache;
int ret;
/* Apply the update (if any) */
return 0;
/* If the left PGA is enabled hit that VU bit... */
- if (snd_soc_read(codec, WM8962_PWR_MGMT_2) & WM8962_HPOUTL_PGA_ENA)
- return snd_soc_write(codec, WM8962_HPOUTL_VOLUME,
- reg_cache[WM8962_HPOUTL_VOLUME]);
+ ret = snd_soc_read(codec, WM8962_PWR_MGMT_2);
+ if (ret & WM8962_HPOUTL_PGA_ENA) {
+ snd_soc_write(codec, WM8962_HPOUTL_VOLUME,
+ snd_soc_read(codec, WM8962_HPOUTL_VOLUME));
+ return 1;
+ }
/* ...otherwise the right. The VU is stereo. */
- if (snd_soc_read(codec, WM8962_PWR_MGMT_2) & WM8962_HPOUTR_PGA_ENA)
- return snd_soc_write(codec, WM8962_HPOUTR_VOLUME,
- reg_cache[WM8962_HPOUTR_VOLUME]);
+ if (ret & WM8962_HPOUTR_PGA_ENA)
+ snd_soc_write(codec, WM8962_HPOUTR_VOLUME,
+ snd_soc_read(codec, WM8962_HPOUTR_VOLUME));
- return 0;
+ return 1;
}
/* The VU bits for the speakers are in a different register to the mute
static int wm8962_mute(struct snd_soc_dai *dai, int mute)
{
struct snd_soc_codec *codec = dai->codec;
- int val;
+ int val, ret;
if (mute)
- val = WM8962_DAC_MUTE;
+ val = WM8962_DAC_MUTE | WM8962_DAC_MUTE_ALT;
else
val = 0;
+ /**
+ * The DAC mute bit is mirrored in two registers, update both to keep
+ * the register cache consistent.
+ */
+ ret = snd_soc_update_bits(codec, WM8962_CLASS_D_CONTROL_1,
+ WM8962_DAC_MUTE_ALT, val);
+ if (ret < 0)
+ return ret;
+
return snd_soc_update_bits(codec, WM8962_ADC_DAC_CONTROL_1,
WM8962_DAC_MUTE, val);
}
int ret;
struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
struct wm8962_pdata *pdata = dev_get_platdata(codec->dev);
- u16 *reg_cache = codec->reg_cache;
int i, trigger, irq_pol;
bool dmicclk, dmicdat;
/* Put the speakers into mono mode? */
if (pdata->spk_mono)
- reg_cache[WM8962_CLASS_D_CONTROL_2]
- |= WM8962_SPK_MONO;
+ snd_soc_update_bits(codec, WM8962_CLASS_D_CONTROL_2,
+ WM8962_SPK_MONO_MASK, WM8962_SPK_MONO);
+
/* Micbias setup, detection enable and detection
* threasholds. */
if (ret < 0)
goto err_enable;
+ regcache_cache_only(wm8962->regmap, true);
+
/* The drivers should power up as needed */
regulator_bulk_disable(ARRAY_SIZE(wm8962->supplies), wm8962->supplies);