static int usb_device_supports_lpm(struct usb_device *udev)
{
+ /* Some devices have trouble with LPM */
+ if (udev->quirks & USB_QUIRK_NO_LPM)
+ return 0;
+
/* USB 2.1 (and greater) devices indicate LPM support through
* their USB 2.0 Extended Capabilities BOS descriptor.
*/
/* Tell khubd to disconnect the device or
* check for a new connection
*/
- if (udev || (portstatus & USB_PORT_STAT_CONNECTION))
+ if (udev || (portstatus & USB_PORT_STAT_CONNECTION) ||
+ (portstatus & USB_PORT_STAT_OVERCURRENT))
set_bit(port1, hub->change_bits);
} else if (portstatus & USB_PORT_STAT_ENABLE) {
|| new_state == USB_STATE_SUSPENDED)
; /* No change to wakeup settings */
else if (new_state == USB_STATE_CONFIGURED)
- wakeup = udev->actconfig->desc.bmAttributes
- & USB_CONFIG_ATT_WAKEUP;
+ wakeup = (udev->quirks &
+ USB_QUIRK_IGNORE_REMOTE_WAKEUP) ? 0 :
+ udev->actconfig->desc.bmAttributes &
+ USB_CONFIG_ATT_WAKEUP;
else
wakeup = 0;
}
dev_dbg(hub->intfdev, "can't resume port %d, status %d\n",
port1, status);
} else {
- /* drive resume for at least 20 msec */
+ /* drive resume for USB_RESUME_TIMEOUT msec */
dev_dbg(&udev->dev, "usb %sresume\n",
(PMSG_IS_AUTO(msg) ? "auto-" : ""));
- msleep(25);
+ msleep(USB_RESUME_TIMEOUT);
/* Virtual root hubs can trigger on GET_PORT_STATUS to
* stop resume signaling. Then finish the resume
goto fail;
}
+ usb_detect_quirks(udev);
+
if (udev->wusb == 0 && le16_to_cpu(udev->descriptor.bcdUSB) >= 0x0201) {
retval = usb_get_bos_descriptor(udev);
if (!retval) {
}
MYDBG("");
- usb_detect_quirks(udev);
if (udev->quirks & USB_QUIRK_DELAY_INIT)
msleep(1000);
hub = list_entry(tmp, struct usb_hub, event_list);
kref_get(&hub->kref);
+ hdev = hub->hdev;
+ usb_get_dev(hdev);
spin_unlock_irq(&hub_event_lock);
- hdev = hub->hdev;
hub_dev = hub->intfdev;
intf = to_usb_interface(hub_dev);
dev_dbg(hub_dev, "state %d ports %d chg %04x evt %04x\n",
usb_autopm_put_interface(intf);
loop_disconnected:
usb_unlock_device(hdev);
+ usb_put_dev(hdev);
kref_put(&hub->kref, hub_release);
} /* end while (1) */