}
/* Fujitsu D3003-S2 board lists DVI-I as DVI-D and VGA */
- if (((dev->pdev->device == 0x9802) || (dev->pdev->device == 0x9806)) &&
+ if (((dev->pdev->device == 0x9802) ||
+ (dev->pdev->device == 0x9805) ||
+ (dev->pdev->device == 0x9806)) &&
(dev->pdev->subsystem_vendor == 0x1734) &&
(dev->pdev->subsystem_device == 0x11bd)) {
if (*connector_type == DRM_MODE_CONNECTOR_VGA) {
}
}
-
return true;
}
(ATOM_SRC_DST_TABLE_FOR_ONE_OBJECT *)
(ctx->bios + data_offset +
le16_to_cpu(router_obj->asObjects[k].usSrcDstTableOffset));
+ u8 *num_dst_objs = (u8 *)
+ ((u8 *)router_src_dst_table + 1 +
+ (router_src_dst_table->ucNumberOfSrc * 2));
+ u16 *dst_objs = (u16 *)(num_dst_objs + 1);
int enum_id;
router.router_id = router_obj_id;
- for (enum_id = 0; enum_id < router_src_dst_table->ucNumberOfDst;
- enum_id++) {
+ for (enum_id = 0; enum_id < (*num_dst_objs); enum_id++) {
if (le16_to_cpu(path->usConnObjectId) ==
- le16_to_cpu(router_src_dst_table->usDstObjectID[enum_id]))
+ le16_to_cpu(dst_objs[enum_id]))
break;
}
le16_to_cpu(firmware_info->info.usReferenceClock);
p1pll->reference_div = 0;
- if (crev < 2)
+ if ((frev < 2) && (crev < 2))
p1pll->pll_out_min =
le16_to_cpu(firmware_info->info.usMinPixelClockPLL_Output);
else
p1pll->pll_out_max =
le32_to_cpu(firmware_info->info.ulMaxPixelClockPLL_Output);
- if (crev >= 4) {
+ if (((frev < 2) && (crev >= 4)) || (frev >= 2)) {
p1pll->lcd_pll_out_min =
le16_to_cpu(firmware_info->info_14.usLcdMinPixelClockPLL_Output) * 100;
if (p1pll->lcd_pll_out_min == 0)
kfree(edid);
}
}
- record += sizeof(ATOM_FAKE_EDID_PATCH_RECORD);
+ record += fake_edid_record->ucFakeEDIDLength ?
+ fake_edid_record->ucFakeEDIDLength + 2 :
+ sizeof(ATOM_FAKE_EDID_PATCH_RECORD);
break;
case LCD_PANEL_RESOLUTION_RECORD_TYPE:
panel_res_record = (ATOM_PANEL_RESOLUTION_PATCH_RECORD *)record;
"adm1032",
"adm1030",
"max6649",
- "lm64",
+ "lm63", /* lm64 */
"f75375",
"asc7xxx",
};
"adm1032",
"adm1030",
"max6649",
- "lm64",
+ "lm63", /* lm64 */
"f75375",
"RV6xx",
"RV770",
/* tell the bios not to handle mode switching */
bios_6_scratch |= ATOM_S6_ACC_BLOCK_DISPLAY_SWITCH;
+ /* clear the vbios dpms state */
+ if (ASIC_IS_DCE4(rdev))
+ bios_2_scratch &= ~ATOM_S2_DEVICE_DPMS_STATE;
+
if (rdev->family >= CHIP_R600) {
WREG32(R600_BIOS_2_SCRATCH, bios_2_scratch);
WREG32(R600_BIOS_6_SCRATCH, bios_6_scratch);