[CPUFREQ] Fix up merge conflicts with recent ACPI changes.

[GitHub/mt8127/android_kernel_alcatel_ttab.git] / arch / i386 / kernel / cpu / cpufreq / longhaul.c

diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/i386/kernel/cpu/cpufreq/longhaul.c
index 8f40cb47720e390a1a83836ad72e4e6d042508cb..fa5cac255c16e32f0e2e19562b92ef8874fa740b 100644 (file)
--- a/arch/i386/kernel/cpu/cpufreq/longhaul.c
+++ b/arch/i386/kernel/cpu/cpufreq/longhaul.c
@@ -196,7 +196,7 @@ static void do_powersaver(int cx_address, unsigned int clock_ratio_index)
                        inb(cx_address);
                        /* Dummy op - must do something useless after P_LVL3
                         * read */
-                       t = inl(acpi_fadt.xpm_tmr_blk.address);
+                       t = inl(acpi_gbl_FADT.xpm_timer_block.address);
                }
                longhaul.bits.EnableSoftVID = 0;
                wrmsrl(MSR_VIA_LONGHAUL, longhaul.val);
@@ -214,7 +214,7 @@ static void do_powersaver(int cx_address, unsigned int clock_ratio_index)
                /* Invoke C3 */
                inb(cx_address);
                /* Dummy op - must do something useless after P_LVL3 read */
-               t = inl(acpi_fadt.xpm_tmr_blk.address);
+               t = inl(acpi_gbl_FADT.xpm_timer_block.address);
        }
        /* Disable bus ratio bit */
        longhaul.bits.EnableSoftBusRatio = 0;
@@ -234,7 +234,7 @@ static void do_powersaver(int cx_address, unsigned int clock_ratio_index)
                        inb(cx_address);
                        /* Dummy op - must do something useless after P_LVL3
                         * read */
-                       t = inl(acpi_fadt.xpm_tmr_blk.address);
+                       t = inl(acpi_gbl_FADT.xpm_timer_block.address);
                }
                longhaul.bits.EnableSoftVID = 0;
                wrmsrl(MSR_VIA_LONGHAUL, longhaul.val);
@@ -291,8 +291,7 @@ static void longhaul_setstate(unsigned int clock_ratio_index)
                outb(3, 0x22);
        } else if ((pr != NULL) && pr->flags.bm_control) {
                /* Disable bus master arbitration */
-               acpi_set_register(ACPI_BITREG_ARB_DISABLE, 1,
-                                 ACPI_MTX_DO_NOT_LOCK);
+               acpi_set_register(ACPI_BITREG_ARB_DISABLE, 1);
        }
        switch (longhaul_version) {
 
@@ -322,8 +321,7 @@ static void longhaul_setstate(unsigned int clock_ratio_index)
        case TYPE_POWERSAVER:
                if (longhaul_flags & USE_ACPI_C3) {
                        /* Don't allow wakeup */
-                       acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 0,
-                                         ACPI_MTX_DO_NOT_LOCK);
+                       acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 0);
                        do_powersaver(cx->address, clock_ratio_index);
                } else {
                        do_powersaver(0, clock_ratio_index);
@@ -336,8 +334,7 @@ static void longhaul_setstate(unsigned int clock_ratio_index)
                outb(0, 0x22);
        } else if ((pr != NULL) && pr->flags.bm_control) {
                /* Enable bus master arbitration */
-               acpi_set_register(ACPI_BITREG_ARB_DISABLE, 0,
-                                 ACPI_MTX_DO_NOT_LOCK);
+               acpi_set_register(ACPI_BITREG_ARB_DISABLE, 0);
        }
        outb(pic2_mask,0xA1);   /* restore mask */
        outb(pic1_mask,0x21);
@@ -416,7 +413,7 @@ static int __init longhaul_get_ranges(void)
        highest_speed = calc_speed(maxmult);
        lowest_speed = calc_speed(minmult);
        dprintk ("FSB:%dMHz  Lowest speed: %s   Highest speed:%s\n", fsb,
-                print_speed(lowest_speed/1000), 
+                print_speed(lowest_speed/1000),
                 print_speed(highest_speed/1000));
 
        if (lowest_speed == highest_speed) {
@@ -531,6 +528,7 @@ static void __init longhaul_setup_voltagescaling(void)
        /* Calculate kHz for one voltage step */
        kHz_step = (highest_speed - min_vid_speed) / numvscales;
 
+
        j = 0;
        while (longhaul_table[j].frequency != CPUFREQ_TABLE_END) {
                speed = longhaul_table[j].frequency;