irq_domain interrupt number mapping library The current design of the Linux kernel uses a single large number space where each separate IRQ source is assigned a different number. This is simple when there is only one interrupt controller, but in systems with multiple interrupt controllers the kernel must ensure that each one gets assigned non-overlapping allocations of Linux IRQ numbers. The number of interrupt controllers registered as unique irqchips show a rising tendency: for example subdrivers of different kinds such as GPIO controllers avoid reimplementing identical callback mechanisms as the IRQ core system by modelling their interrupt handlers as irqchips, i.e. in effect cascading interrupt controllers. Here the interrupt number loose all kind of correspondence to hardware interrupt numbers: whereas in the past, IRQ numbers could be chosen so they matched the hardware IRQ line into the root interrupt controller (i.e. the component actually fireing the interrupt line to the CPU) nowadays this number is just a number. For this reason we need a mechanism to separate controller-local interrupt numbers, called hardware irq's, from Linux IRQ numbers. The irq_alloc_desc*() and irq_free_desc*() APIs provide allocation of irq numbers, but they don't provide any support for reverse mapping of the controller-local IRQ (hwirq) number into the Linux IRQ number space. The irq_domain library adds mapping between hwirq and IRQ numbers on top of the irq_alloc_desc*() API. An irq_domain to manage mapping is preferred over interrupt controller drivers open coding their own reverse mapping scheme. irq_domain also implements translation from Device Tree interrupt specifiers to hwirq numbers, and can be easily extended to support other IRQ topology data sources. === irq_domain usage === An interrupt controller driver creates and registers an irq_domain by calling one of the irq_domain_add_*() functions (each mapping method has a different allocator function, more on that later). The function will return a pointer to the irq_domain on success. The caller must provide the allocator function with an irq_domain_ops structure with the .map callback populated as a minimum. In most cases, the irq_domain will begin empty without any mappings between hwirq and IRQ numbers. Mappings are added to the irq_domain by calling irq_create_mapping() which accepts the irq_domain and a hwirq number as arguments. If a mapping for the hwirq doesn't already exist then it will allocate a new Linux irq_desc, associate it with the hwirq, and call the .map() callback so the driver can perform any required hardware setup. When an interrupt is received, irq_find_mapping() function should be used to find the Linux IRQ number from the hwirq number. The irq_create_mapping() function must be called *atleast once* before any call to irq_find_mapping(), lest the descriptor will not be allocated. If the driver has the Linux IRQ number or the irq_data pointer, and needs to know the associated hwirq number (such as in the irq_chip callbacks) then it can be directly obtained from irq_data->hwirq. === Types of irq_domain mappings === There are several mechanisms available for reverse mapping from hwirq to Linux irq, and each mechanism uses a different allocation function. Which reverse map type should be used depends on the use case. Each of the reverse map types are described below: ==== Linear ==== irq_domain_add_linear() The linear reverse map maintains a fixed size table indexed by the hwirq number. When a hwirq is mapped, an irq_desc is allocated for the hwirq, and the IRQ number is stored in the table. The Linear map is a good choice when the maximum number of hwirqs is fixed and a relatively small number (~ < 256). The advantages of this map are fixed time lookup for IRQ numbers, and irq_descs are only allocated for in-use IRQs. The disadvantage is that the table must be as large as the largest possible hwirq number. The majority of drivers should use the linear map. ==== Tree ==== irq_domain_add_tree() The irq_domain maintains a radix tree map from hwirq numbers to Linux IRQs. When an hwirq is mapped, an irq_desc is allocated and the hwirq is used as the lookup key for the radix tree. The tree map is a good choice if the hwirq number can be very large since it doesn't need to allocate a table as large as the largest hwirq number. The disadvantage is that hwirq to IRQ number lookup is dependent on how many entries are in the table. Very few drivers should need this mapping. At the moment, powerpc iseries is the only user. ==== No Map ===- irq_domain_add_nomap() The No Map mapping is to be used when the hwirq number is programmable in the hardware. In this case it is best to program the Linux IRQ number into the hardware itself so that no mapping is required. Calling irq_create_direct_mapping() will allocate a Linux IRQ number and call the .map() callback so that driver can program the Linux IRQ number into the hardware. Most drivers cannot use this mapping. ==== Legacy ==== irq_domain_add_simple() irq_domain_add_legacy() irq_domain_add_legacy_isa() The Legacy mapping is a special case for drivers that already have a range of irq_descs allocated for the hwirqs. It is used when the driver cannot be immediately converted to use the linear mapping. For example, many embedded system board support files use a set of #defines for IRQ numbers that are passed to struct device registrations. In that case the Linux IRQ numbers cannot be dynamically assigned and the legacy mapping should be used. The legacy map assumes a contiguous range of IRQ numbers has already been allocated for the controller and that the IRQ number can be calculated by adding a fixed offset to the hwirq number, and visa-versa. The disadvantage is that it requires the interrupt controller to manage IRQ allocations and it requires an irq_desc to be allocated for every hwirq, even if it is unused. The legacy map should only be used if fixed IRQ mappings must be supported. For example, ISA controllers would use the legacy map for mapping Linux IRQs 0-15 so that existing ISA drivers get the correct IRQ numbers. Most users of legacy mappings should use irq_domain_add_simple() which will use a legacy domain only if an IRQ range is supplied by the system and will otherwise use a linear domain mapping. The semantics of this call are such that if an IRQ range is specified then descriptors will be allocated on-the-fly for it, and if no range is specified it will fall through to irq_domain_add_linear() which meand *no* irq descriptors will be allocated. A typical use case for simple domains is where an irqchip provider is supporting both dynamic and static IRQ assignments. In order to avoid ending up in a situation where a linear domain is used and no descriptor gets allocated it is very important to make sure that the driver using the simple domain call irq_create_mapping() before any irq_find_mapping() since the latter will actually work for the static IRQ assignment case.