[GitHub/mt8127/android_kernel_alcatel_ttab.git] / scripts / kconfig / Makefile

# ===========================================================================
# Kernel configuration targets
# These targets are used from top-level makefile

PHONY += oldconfig xconfig gconfig menuconfig config silentoldconfig update-po-config \
	localmodconfig localyesconfig

ifdef KBUILD_KCONFIG
Kconfig := $(KBUILD_KCONFIG)
else
Kconfig := arch/$(SRCARCH)/Kconfig
endif

xconfig: $(obj)/qconf
	$< $(Kconfig)

gconfig: $(obj)/gconf
	$< $(Kconfig)

menuconfig: $(obj)/mconf
	$< $(Kconfig)

config: $(obj)/conf
	$< --oldaskconfig $(Kconfig)

nconfig: $(obj)/nconf
	$< $(Kconfig)

oldconfig: $(obj)/conf
	$< --$@ $(Kconfig)

silentoldconfig: $(obj)/conf
	$(Q)mkdir -p include/generated
	$< --$@ $(Kconfig)

localmodconfig: $(obj)/streamline_config.pl $(obj)/conf
	$(Q)perl $< $(srctree) $(Kconfig) > .tmp.config
	$(Q)if [ -f .config ]; then					\
			cmp -s .tmp.config .config ||			\
			(mv -f .config .config.old.1;			\
			 mv -f .tmp.config .config;			\
			 $(obj)/conf --silentoldconfig $(Kconfig);	\
			 mv -f .config.old.1 .config.old)		\
	else								\
			mv -f .tmp.config .config;			\
			$(obj)/conf --silentoldconfig $(Kconfig);	\
	fi
	$(Q)rm -f .tmp.config

localyesconfig: $(obj)/streamline_config.pl $(obj)/conf
	$(Q)perl $< $(srctree) $(Kconfig) > .tmp.config
	$(Q)sed -i s/=m/=y/ .tmp.config
	$(Q)if [ -f .config ]; then					\
			cmp -s .tmp.config .config ||			\
			(mv -f .config .config.old.1;			\
			 mv -f .tmp.config .config;			\
			 $(obj)/conf --silentoldconfig $(Kconfig);	\
			 mv -f .config.old.1 .config.old)		\
	else								\
			mv -f .tmp.config .config;			\
			$(obj)/conf --silentoldconfig $(Kconfig);	\
	fi
	$(Q)rm -f .tmp.config

# Create new linux.pot file
# Adjust charset to UTF-8 in .po file to accept UTF-8 in Kconfig files
# The symlink is used to repair a deficiency in arch/um
update-po-config: $(obj)/kxgettext $(obj)/gconf.glade.h
	$(Q)echo "  GEN config"
	$(Q)xgettext --default-domain=linux              \
	    --add-comments --keyword=_ --keyword=N_      \
	    --from-code=UTF-8                            \
	    --files-from=scripts/kconfig/POTFILES.in     \
	    --output $(obj)/config.pot
	$(Q)sed -i s/CHARSET/UTF-8/ $(obj)/config.pot
	$(Q)ln -fs Kconfig.i386 arch/um/Kconfig.arch
	$(Q)(for i in `ls arch/*/Kconfig`;               \
	    do                                           \
		echo "  GEN $$i";                        \
		$(obj)/kxgettext $$i                     \
		     >> $(obj)/config.pot;               \
	    done )
	$(Q)msguniq --sort-by-file --to-code=UTF-8 $(obj)/config.pot \
	    --output $(obj)/linux.pot
	$(Q)rm -f arch/um/Kconfig.arch
	$(Q)rm -f $(obj)/config.pot

PHONY += allnoconfig allyesconfig allmodconfig alldefconfig randconfig

allnoconfig allyesconfig allmodconfig alldefconfig randconfig: $(obj)/conf
	$< --$@ $(Kconfig)

PHONY += listnewconfig oldnoconfig defconfig

listnewconfig oldnoconfig: $(obj)/conf
	$< --$@ $(Kconfig)

defconfig: $(obj)/conf
ifeq ($(KBUILD_DEFCONFIG),)
	$< --defconfig $(Kconfig)
else
	@echo "*** Default configuration is based on '$(KBUILD_DEFCONFIG)'"
	$(Q)$< --defconfig=arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG) $(Kconfig)
endif

%_defconfig: $(obj)/conf
	$(Q)$< --defconfig=arch/$(SRCARCH)/configs/$@ $(Kconfig)

# Help text used by make help
help:
	@echo  '  config	  - Update current config utilising a line-oriented program'
	@echo  '  nconfig         - Update current config utilising a ncurses menu based program'
	@echo  '  menuconfig	  - Update current config utilising a menu based program'
	@echo  '  xconfig	  - Update current config utilising a QT based front-end'
	@echo  '  gconfig	  - Update current config utilising a GTK based front-end'
	@echo  '  oldconfig	  - Update current config utilising a provided .config as base'
	@echo  '  localmodconfig  - Update current config disabling modules not loaded'
	@echo  '  localyesconfig  - Update current config converting local mods to core'
	@echo  '  silentoldconfig - Same as oldconfig, but quietly, additionally update deps'
	@echo  '  defconfig	  - New config with default from ARCH supplied defconfig'
	@echo  '  allnoconfig	  - New config where all options are answered with no'
	@echo  '  allyesconfig	  - New config where all options are accepted with yes'
	@echo  '  allmodconfig	  - New config selecting modules when possible'
	@echo  '  alldefconfig    - New config with all symbols set to default'
	@echo  '  randconfig	  - New config with random answer to all options'
	@echo  '  listnewconfig   - List new options'
	@echo  '  oldnoconfig     - Same as silentoldconfig but set new symbols to n (unset)'

# lxdialog stuff
check-lxdialog  := $(srctree)/$(src)/lxdialog/check-lxdialog.sh

# Use recursively expanded variables so we do not call gcc unless
# we really need to do so. (Do not call gcc as part of make mrproper)
HOST_EXTRACFLAGS = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags)
HOST_LOADLIBES   = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ldflags $(HOSTCC))

HOST_EXTRACFLAGS += -DLOCALE


# ===========================================================================
# Shared Makefile for the various kconfig executables:
# conf:	  Used for defconfig, oldconfig and related targets
# nconf:  Used for the nconfig target.
#         Utilizes ncurses
# mconf:  Used for the menuconfig target
#         Utilizes the lxdialog package
# qconf:  Used for the xconfig target
#         Based on QT which needs to be installed to compile it
# gconf:  Used for the gconfig target
#         Based on GTK which needs to be installed to compile it
# object files used by all kconfig flavours

lxdialog := lxdialog/checklist.o lxdialog/util.o lxdialog/inputbox.o
lxdialog += lxdialog/textbox.o lxdialog/yesno.o lxdialog/menubox.o

conf-objs	:= conf.o  zconf.tab.o
mconf-objs     := mconf.o zconf.tab.o $(lxdialog)
nconf-objs     := nconf.o zconf.tab.o nconf.gui.o
kxgettext-objs	:= kxgettext.o zconf.tab.o

hostprogs-y := conf qconf gconf kxgettext

ifeq ($(MAKECMDGOALS),nconfig)
	hostprogs-y += nconf
endif

ifeq ($(MAKECMDGOALS),menuconfig)
	hostprogs-y += mconf
endif

ifeq ($(MAKECMDGOALS),xconfig)
	qconf-target := 1
endif
ifeq ($(MAKECMDGOALS),gconfig)
	gconf-target := 1
endif


ifeq ($(qconf-target),1)
qconf-cxxobjs	:= qconf.o
qconf-objs	:= kconfig_load.o zconf.tab.o
endif

ifeq ($(gconf-target),1)
gconf-objs	:= gconf.o kconfig_load.o zconf.tab.o
endif

clean-files	:= lkc_defs.h qconf.moc .tmp_qtcheck \
		   .tmp_gtkcheck zconf.tab.c lex.zconf.c zconf.hash.c gconf.glade.h
clean-files     += mconf qconf gconf nconf
clean-files     += config.pot linux.pot

# Check that we have the required ncurses stuff installed for lxdialog (menuconfig)
PHONY += $(obj)/dochecklxdialog
$(addprefix $(obj)/,$(lxdialog)): $(obj)/dochecklxdialog
$(obj)/dochecklxdialog:
	$(Q)$(CONFIG_SHELL) $(check-lxdialog) -check $(HOSTCC) $(HOST_EXTRACFLAGS) $(HOST_LOADLIBES)

always := dochecklxdialog

# Add environment specific flags
HOST_EXTRACFLAGS += $(shell $(CONFIG_SHELL) $(srctree)/$(src)/check.sh $(HOSTCC) $(HOSTCFLAGS))

# generated files seem to need this to find local include files
HOSTCFLAGS_lex.zconf.o	:= -I$(src)
HOSTCFLAGS_zconf.tab.o	:= -I$(src)

HOSTLOADLIBES_qconf	= $(KC_QT_LIBS) -ldl
HOSTCXXFLAGS_qconf.o	= $(KC_QT_CFLAGS) -D LKC_DIRECT_LINK

HOSTLOADLIBES_gconf	= `pkg-config --libs gtk+-2.0 gmodule-2.0 libglade-2.0`
HOSTCFLAGS_gconf.o	= `pkg-config --cflags gtk+-2.0 gmodule-2.0 libglade-2.0` \
                          -D LKC_DIRECT_LINK

HOSTLOADLIBES_nconf	= -lmenu -lpanel -lncurses
$(obj)/qconf.o: $(obj)/.tmp_qtcheck

ifeq ($(qconf-target),1)
$(obj)/.tmp_qtcheck: $(src)/Makefile
-include $(obj)/.tmp_qtcheck

# QT needs some extra effort...
$(obj)/.tmp_qtcheck:
	@set -e; echo "  CHECK   qt"; dir=""; pkg=""; \
	pkg-config --exists qt 2> /dev/null && pkg=qt; \
	pkg-config --exists qt-mt 2> /dev/null && pkg=qt-mt; \
	if [ -n "$$pkg" ]; then \
	  cflags="\$$(shell pkg-config $$pkg --cflags)"; \
	  libs="\$$(shell pkg-config $$pkg --libs)"; \
	  moc="\$$(shell pkg-config $$pkg --variable=prefix)/bin/moc"; \
	  dir="$$(pkg-config $$pkg --variable=prefix)"; \
	else \
	  for d in $$QTDIR /usr/share/qt* /usr/lib/qt*; do \
	    if [ -f $$d/include/qconfig.h ]; then dir=$$d; break; fi; \
	  done; \
	  if [ -z "$$dir" ]; then \
	    echo "*"; \
	    echo "* Unable to find the QT3 installation. Please make sure that"; \
	    echo "* the QT3 development package is correctly installed and"; \
	    echo "* either install pkg-config or set the QTDIR environment"; \
	    echo "* variable to the correct location."; \
	    echo "*"; \
	    false; \
	  fi; \
	  libpath=$$dir/lib; lib=qt; osdir=""; \
	  $(HOSTCXX) -print-multi-os-directory > /dev/null 2>&1 && \
	    osdir=x$$($(HOSTCXX) -print-multi-os-directory); \
	  test -d $$libpath/$$osdir && libpath=$$libpath/$$osdir; \
	  test -f $$libpath/libqt-mt.so && lib=qt-mt; \
	  cflags="-I$$dir/include"; \
	  libs="-L$$libpath -Wl,-rpath,$$libpath -l$$lib"; \
	  moc="$$dir/bin/moc"; \
	fi; \
	if [ ! -x $$dir/bin/moc -a -x /usr/bin/moc ]; then \
	  echo "*"; \
	  echo "* Unable to find $$dir/bin/moc, using /usr/bin/moc instead."; \
	  echo "*"; \
	  moc="/usr/bin/moc"; \
	fi; \
	echo "KC_QT_CFLAGS=$$cflags" > $@; \
	echo "KC_QT_LIBS=$$libs" >> $@; \
	echo "KC_QT_MOC=$$moc" >> $@
endif

$(obj)/gconf.o: $(obj)/.tmp_gtkcheck

ifeq ($(gconf-target),1)
-include $(obj)/.tmp_gtkcheck

# GTK needs some extra effort, too...
$(obj)/.tmp_gtkcheck:
	@if `pkg-config --exists gtk+-2.0 gmodule-2.0 libglade-2.0`; then		\
		if `pkg-config --atleast-version=2.0.0 gtk+-2.0`; then			\
			touch $@;								\
		else									\
			echo "*"; 							\
			echo "* GTK+ is present but version >= 2.0.0 is required.";	\
			echo "*";							\
			false;								\
		fi									\
	else										\
		echo "*"; 								\
		echo "* Unable to find the GTK+ installation. Please make sure that"; 	\
		echo "* the GTK+ 2.0 development package is correctly installed..."; 	\
		echo "* You need gtk+-2.0, glib-2.0 and libglade-2.0."; 		\
		echo "*"; 								\
		false;									\
	fi
endif

$(obj)/zconf.tab.o: $(obj)/lex.zconf.c $(obj)/zconf.hash.c

$(obj)/kconfig_load.o: $(obj)/lkc_defs.h

$(obj)/qconf.o: $(obj)/qconf.moc $(obj)/lkc_defs.h

$(obj)/gconf.o: $(obj)/lkc_defs.h

$(obj)/%.moc: $(src)/%.h
	$(KC_QT_MOC) -i $< -o $@

$(obj)/lkc_defs.h: $(src)/lkc_proto.h
	sed < $< > $@ 's/P(\([^,]*\),.*/#define \1 (\*\1_p)/'

# Extract gconf menu items for I18N support
$(obj)/gconf.glade.h: $(obj)/gconf.glade
	intltool-extract --type=gettext/glade $(obj)/gconf.glade

###
# The following requires flex/bison/gperf
# By default we use the _shipped versions, uncomment the following line if
# you are modifying the flex/bison src.
# LKC_GENPARSER := 1

ifdef LKC_GENPARSER

$(obj)/zconf.tab.c: $(src)/zconf.y
$(obj)/lex.zconf.c: $(src)/zconf.l
$(obj)/zconf.hash.c: $(src)/zconf.gperf

%.tab.c: %.y
	bison -l -b $* -p $(notdir $*) $<
	cp $@ $@_shipped

lex.%.c: %.l
	flex -L -P$(notdir $*) -o$@ $<
	cp $@ $@_shipped

%.hash.c: %.gperf
	gperf < $< > $@
	cp $@ $@_shipped

endif
Commit	Line	Data
1da177e4 LT	1	# ===========================================================================
	2	# Kernel configuration targets
	3	# These targets are used from top-level makefile
	4
03fa25da	5	PHONY += oldconfig xconfig gconfig menuconfig config silentoldconfig update-po-config \
281c9dad	6	localmodconfig localyesconfig
1da177e4	7
61bee204 AV	8	ifdef KBUILD_KCONFIG
	9	Kconfig := $(KBUILD_KCONFIG)
	10	else
daa93fab	11	Kconfig := arch/$(SRCARCH)/Kconfig
61bee204	12	endif
e703f75d	13
1da177e4	14	xconfig: $(obj)/qconf
e703f75d	15	$< $(Kconfig)
1da177e4 LT	16
1da177e4 LT	17	gconfig: $(obj)/gconf
e703f75d	18	$< $(Kconfig)
1da177e4 LT	19
1da177e4 LT	20	menuconfig: $(obj)/mconf
e703f75d	21	$< $(Kconfig)
1da177e4 LT	22
1da177e4 LT	23	config: $(obj)/conf
4062f1a4	24	$< --oldaskconfig $(Kconfig)
1da177e4	25
692d97c3	26	nconfig: $(obj)/nconf
	27	$< $(Kconfig)
	28
1da177e4	29	oldconfig: $(obj)/conf
4062f1a4	30	$< --$@ $(Kconfig)
1da177e4 LT	31
1da177e4 LT	32	silentoldconfig: $(obj)/conf
32197c7f	33	$(Q)mkdir -p include/generated
4062f1a4	34	$< --$@ $(Kconfig)
1da177e4	35
03fa25da	36	localmodconfig: $(obj)/streamline_config.pl $(obj)/conf
463bf900	37	$(Q)perl $< $(srctree) $(Kconfig) > .tmp.config
4062f1a4 SR	38	$(Q)if [ -f .config ]; then \
	39	cmp -s .tmp.config .config \|\| \
	40	(mv -f .config .config.old.1; \
	41	mv -f .tmp.config .config; \
	42	$(obj)/conf --silentoldconfig $(Kconfig); \
	43	mv -f .config.old.1 .config.old) \
	44	else \
	45	mv -f .tmp.config .config; \
	46	$(obj)/conf --silentoldconfig $(Kconfig); \
a7c02602	47	fi
03fa25da SR	48	$(Q)rm -f .tmp.config
03fa25da SR	49
48586218	50	localyesconfig: $(obj)/streamline_config.pl $(obj)/conf
463bf900	51	$(Q)perl $< $(srctree) $(Kconfig) > .tmp.config
281c9dad	52	$(Q)sed -i s/=m/=y/ .tmp.config
4062f1a4 SR	53	$(Q)if [ -f .config ]; then \
	54	cmp -s .tmp.config .config \|\| \
	55	(mv -f .config .config.old.1; \
	56	mv -f .tmp.config .config; \
	57	$(obj)/conf --silentoldconfig $(Kconfig); \
	58	mv -f .config.old.1 .config.old) \
	59	else \
	60	mv -f .tmp.config .config; \
	61	$(obj)/conf --silentoldconfig $(Kconfig); \
a7c02602	62	fi
281c9dad SR	63	$(Q)rm -f .tmp.config
281c9dad SR	64
1020026f	65	# Create new linux.pot file
b70e325c SR	66	# Adjust charset to UTF-8 in .po file to accept UTF-8 in Kconfig files
b70e325c SR	67	# The symlink is used to repair a deficiency in arch/um
46d26319	68	update-po-config: $(obj)/kxgettext $(obj)/gconf.glade.h
1020026f EG	69	$(Q)echo " GEN config"
1020026f EG	70	$(Q)xgettext --default-domain=linux \
b70e325c SR	71	--add-comments --keyword=_ --keyword=N_ \
	72	--from-code=UTF-8 \
	73	--files-from=scripts/kconfig/POTFILES.in \
	74	--output $(obj)/config.pot
	75	$(Q)sed -i s/CHARSET/UTF-8/ $(obj)/config.pot
	76	$(Q)ln -fs Kconfig.i386 arch/um/Kconfig.arch
4217516e	77	$(Q)(for i in `ls arch/*/Kconfig`; \
1020026f EG	78	do \
1020026f EG	79	echo " GEN $$i"; \
4217516e	80	$(obj)/kxgettext $$i \
1020026f EG	81	>> $(obj)/config.pot; \
	82	done )
	83	$(Q)msguniq --sort-by-file --to-code=UTF-8 $(obj)/config.pot \
b70e325c SR	84	--output $(obj)/linux.pot
	85	$(Q)rm -f arch/um/Kconfig.arch
	86	$(Q)rm -f $(obj)/config.pot
3b9fa093	87
0748cb3e	88	PHONY += allnoconfig allyesconfig allmodconfig alldefconfig randconfig
1da177e4	89
0748cb3e	90	allnoconfig allyesconfig allmodconfig alldefconfig randconfig: $(obj)/conf
4062f1a4	91	$< --$@ $(Kconfig)
1da177e4	92
861b4ea4	93	PHONY += listnewconfig oldnoconfig defconfig
1da177e4	94
861b4ea4	95	listnewconfig oldnoconfig: $(obj)/conf
4062f1a4	96	$< --$@ $(Kconfig)
1da177e4 LT	97
	98	defconfig: $(obj)/conf
	99	ifeq ($(KBUILD_DEFCONFIG),)
4062f1a4	100	$< --defconfig $(Kconfig)
1da177e4	101	else
2266cfd5	102	@echo "*** Default configuration is based on '$(KBUILD_DEFCONFIG)'"
4062f1a4	103	$(Q)$< --defconfig=arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG) $(Kconfig)
1da177e4 LT	104	endif
	105
	106	%_defconfig: $(obj)/conf
4062f1a4	107	$(Q)$< --defconfig=arch/$(SRCARCH)/configs/$@ $(Kconfig)
1da177e4 LT	108
	109	# Help text used by make help
	110	help:
	111	@echo ' config - Update current config utilising a line-oriented program'
692d97c3	112	@echo ' nconfig - Update current config utilising a ncurses menu based program'
1da177e4 LT	113	@echo ' menuconfig - Update current config utilising a menu based program'
	114	@echo ' xconfig - Update current config utilising a QT based front-end'
	115	@echo ' gconfig - Update current config utilising a GTK based front-end'
	116	@echo ' oldconfig - Update current config utilising a provided .config as base'
03fa25da	117	@echo ' localmodconfig - Update current config disabling modules not loaded'
281c9dad	118	@echo ' localyesconfig - Update current config converting local mods to core'
590a5857	119	@echo ' silentoldconfig - Same as oldconfig, but quietly, additionally update deps'
0748cb3e	120	@echo ' defconfig - New config with default from ARCH supplied defconfig'
e11f0496	121	@echo ' allnoconfig - New config where all options are answered with no'
0748cb3e SR	122	@echo ' allyesconfig - New config where all options are accepted with yes'
	123	@echo ' allmodconfig - New config selecting modules when possible'
	124	@echo ' alldefconfig - New config with all symbols set to default'
	125	@echo ' randconfig - New config with random answer to all options'
861b4ea4	126	@echo ' listnewconfig - List new options'
ef61ca88	127	@echo ' oldnoconfig - Same as silentoldconfig but set new symbols to n (unset)'
1da177e4	128
2982de69 SR	129	# lxdialog stuff
	130	check-lxdialog := $(srctree)/$(src)/lxdialog/check-lxdialog.sh
	131
e9e40e14	132	# Use recursively expanded variables so we do not call gcc unless
2982de69 SR	133	# we really need to do so. (Do not call gcc as part of make mrproper)
	134	HOST_EXTRACFLAGS = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags)
	135	HOST_LOADLIBES = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ldflags $(HOSTCC))
	136
	137	HOST_EXTRACFLAGS += -DLOCALE
	138
2982de69	139
1da177e4 LT	140	# ===========================================================================
	141	# Shared Makefile for the various kconfig executables:
	142	# conf: Used for defconfig, oldconfig and related targets
692d97c3	143	# nconf: Used for the nconfig target.
692d97c3	144	# Utilizes ncurses
6f26e5e4	145	# mconf: Used for the menuconfig target
1da177e4 LT	146	# Utilizes the lxdialog package
	147	# qconf: Used for the xconfig target
	148	# Based on QT which needs to be installed to compile it
	149	# gconf: Used for the gconfig target
	150	# Based on GTK which needs to be installed to compile it
	151	# object files used by all kconfig flavours
	152
2982de69 SR	153	lxdialog := lxdialog/checklist.o lxdialog/util.o lxdialog/inputbox.o
	154	lxdialog += lxdialog/textbox.o lxdialog/yesno.o lxdialog/menubox.o
	155
1da177e4	156	conf-objs := conf.o zconf.tab.o
692d97c3	157	mconf-objs := mconf.o zconf.tab.o $(lxdialog)
692d97c3	158	nconf-objs := nconf.o zconf.tab.o nconf.gui.o
3b9fa093	159	kxgettext-objs := kxgettext.o zconf.tab.o
1da177e4	160
c29121b7 SR	161	hostprogs-y := conf qconf gconf kxgettext
c29121b7 SR	162
692d97c3	163	ifeq ($(MAKECMDGOALS),nconfig)
	164	hostprogs-y += nconf
	165	endif
	166
c29121b7 SR	167	ifeq ($(MAKECMDGOALS),menuconfig)
	168	hostprogs-y += mconf
	169	endif
	170
1da177e4 LT	171	ifeq ($(MAKECMDGOALS),xconfig)
	172	qconf-target := 1
	173	endif
	174	ifeq ($(MAKECMDGOALS),gconfig)
	175	gconf-target := 1
	176	endif
	177
	178
	179	ifeq ($(qconf-target),1)
	180	qconf-cxxobjs := qconf.o
	181	qconf-objs := kconfig_load.o zconf.tab.o
	182	endif
	183
	184	ifeq ($(gconf-target),1)
	185	gconf-objs := gconf.o kconfig_load.o zconf.tab.o
	186	endif
	187
	188	clean-files := lkc_defs.h qconf.moc .tmp_qtcheck \
46d26319	189	.tmp_gtkcheck zconf.tab.c lex.zconf.c zconf.hash.c gconf.glade.h
692d97c3	190	clean-files += mconf qconf gconf nconf
1020026f	191	clean-files += config.pot linux.pot
1da177e4	192
6e588f6d SR	193	# Check that we have the required ncurses stuff installed for lxdialog (menuconfig)
	194	PHONY += $(obj)/dochecklxdialog
	195	$(addprefix $(obj)/,$(lxdialog)): $(obj)/dochecklxdialog
	196	$(obj)/dochecklxdialog:
	197	$(Q)$(CONFIG_SHELL) $(check-lxdialog) -check $(HOSTCC) $(HOST_EXTRACFLAGS) $(HOST_LOADLIBES)
	198
	199	always := dochecklxdialog
	200
aa1e5ef5 SR	201	# Add environment specific flags
aa1e5ef5 SR	202	HOST_EXTRACFLAGS += $(shell $(CONFIG_SHELL) $(srctree)/$(src)/check.sh $(HOSTCC) $(HOSTCFLAGS))
70a6a0cb	203
1da177e4 LT	204	# generated files seem to need this to find local include files
	205	HOSTCFLAGS_lex.zconf.o := -I$(src)
	206	HOSTCFLAGS_zconf.tab.o := -I$(src)
	207
b3a5225f RZ	208	HOSTLOADLIBES_qconf = $(KC_QT_LIBS) -ldl
b3a5225f RZ	209	HOSTCXXFLAGS_qconf.o = $(KC_QT_CFLAGS) -D LKC_DIRECT_LINK
1da177e4	210
37193147 AB	211	HOSTLOADLIBES_gconf = `pkg-config --libs gtk+-2.0 gmodule-2.0 libglade-2.0`
37193147 AB	212	HOSTCFLAGS_gconf.o = `pkg-config --cflags gtk+-2.0 gmodule-2.0 libglade-2.0` \
1da177e4 LT	213	-D LKC_DIRECT_LINK
1da177e4 LT	214
692d97c3	215	HOSTLOADLIBES_nconf = -lmenu -lpanel -lncurses
1da177e4 LT	216	$(obj)/qconf.o: $(obj)/.tmp_qtcheck
	217
	218	ifeq ($(qconf-target),1)
b3a5225f	219	$(obj)/.tmp_qtcheck: $(src)/Makefile
1da177e4 LT	220	-include $(obj)/.tmp_qtcheck
	221
	222	# QT needs some extra effort...
	223	$(obj)/.tmp_qtcheck:
b3a5225f RZ	224	@set -e; echo " CHECK qt"; dir=""; pkg=""; \
	225	pkg-config --exists qt 2> /dev/null && pkg=qt; \
	226	pkg-config --exists qt-mt 2> /dev/null && pkg=qt-mt; \
	227	if [ -n "$$pkg" ]; then \
	228	cflags="\$$(shell pkg-config $$pkg --cflags)"; \
	229	libs="\$$(shell pkg-config $$pkg --libs)"; \
	230	moc="\$$(shell pkg-config $$pkg --variable=prefix)/bin/moc"; \
	231	dir="$$(pkg-config $$pkg --variable=prefix)"; \
ab919c06	232	else \
b3a5225f RZ	233	for d in $$QTDIR /usr/share/qt* /usr/lib/qt*; do \
	234	if [ -f $$d/include/qconfig.h ]; then dir=$$d; break; fi; \
	235	done; \
	236	if [ -z "$$dir" ]; then \
	237	echo "*"; \
9ae57004 SR	238	echo "* Unable to find the QT3 installation. Please make sure that"; \
9ae57004 SR	239	echo "* the QT3 development package is correctly installed and"; \
b3a5225f RZ	240	echo "* either install pkg-config or set the QTDIR environment"; \
	241	echo "* variable to the correct location."; \
	242	echo "*"; \
	243	false; \
	244	fi; \
	245	libpath=$$dir/lib; lib=qt; osdir=""; \
	246	$(HOSTCXX) -print-multi-os-directory > /dev/null 2>&1 && \
	247	osdir=x$$($(HOSTCXX) -print-multi-os-directory); \
	248	test -d $$libpath/$$osdir && libpath=$$libpath/$$osdir; \
	249	test -f $$libpath/libqt-mt.so && lib=qt-mt; \
	250	cflags="-I$$dir/include"; \
	251	libs="-L$$libpath -Wl,-rpath,$$libpath -l$$lib"; \
	252	moc="$$dir/bin/moc"; \
ab919c06	253	fi; \
b3a5225f	254	if [ ! -x $$dir/bin/moc -a -x /usr/bin/moc ]; then \
1da177e4	255	echo "*"; \
b3a5225f	256	echo "* Unable to find $$dir/bin/moc, using /usr/bin/moc instead."; \
1da177e4	257	echo "*"; \
b3a5225f RZ	258	moc="/usr/bin/moc"; \
	259	fi; \
	260	echo "KC_QT_CFLAGS=$$cflags" > $@; \
	261	echo "KC_QT_LIBS=$$libs" >> $@; \
	262	echo "KC_QT_MOC=$$moc" >> $@
1da177e4 LT	263	endif
	264
	265	$(obj)/gconf.o: $(obj)/.tmp_gtkcheck
	266
	267	ifeq ($(gconf-target),1)
	268	-include $(obj)/.tmp_gtkcheck
	269
	270	# GTK needs some extra effort, too...
	271	$(obj)/.tmp_gtkcheck:
37193147 AB	272	@if `pkg-config --exists gtk+-2.0 gmodule-2.0 libglade-2.0`; then \
37193147 AB	273	if `pkg-config --atleast-version=2.0.0 gtk+-2.0`; then \
1da177e4 LT	274	touch $@; \
	275	else \
	276	echo "*"; \
	277	echo "* GTK+ is present but version >= 2.0.0 is required."; \
	278	echo "*"; \
	279	false; \
	280	fi \
	281	else \
	282	echo "*"; \
	283	echo "* Unable to find the GTK+ installation. Please make sure that"; \
	284	echo "* the GTK+ 2.0 development package is correctly installed..."; \
	285	echo "* You need gtk+-2.0, glib-2.0 and libglade-2.0."; \
	286	echo "*"; \
	287	false; \
	288	fi
	289	endif
	290
7a88488b	291	$(obj)/zconf.tab.o: $(obj)/lex.zconf.c $(obj)/zconf.hash.c
1da177e4 LT	292
	293	$(obj)/kconfig_load.o: $(obj)/lkc_defs.h
	294
	295	$(obj)/qconf.o: $(obj)/qconf.moc $(obj)/lkc_defs.h
	296
	297	$(obj)/gconf.o: $(obj)/lkc_defs.h
	298
	299	$(obj)/%.moc: $(src)/%.h
b3a5225f	300	$(KC_QT_MOC) -i $< -o $@
1da177e4 LT	301
	302	$(obj)/lkc_defs.h: $(src)/lkc_proto.h
	303	sed < $< > $@ 's/P(\([^,]\),./#define \1 (\*\1_p)/'
	304
46d26319 EG	305	# Extract gconf menu items for I18N support
	306	$(obj)/gconf.glade.h: $(obj)/gconf.glade
	307	intltool-extract --type=gettext/glade $(obj)/gconf.glade
1da177e4 LT	308
1da177e4 LT	309	###
7a88488b	310	# The following requires flex/bison/gperf
1da177e4 LT	311	# By default we use the _shipped versions, uncomment the following line if
	312	# you are modifying the flex/bison src.
	313	# LKC_GENPARSER := 1
	314
	315	ifdef LKC_GENPARSER
	316
491d7110 RZ	317	$(obj)/zconf.tab.c: $(src)/zconf.y
491d7110 RZ	318	$(obj)/lex.zconf.c: $(src)/zconf.l
7a88488b	319	$(obj)/zconf.hash.c: $(src)/zconf.gperf
1da177e4 LT	320
1da177e4 LT	321	%.tab.c: %.y
491d7110 RZ	322	bison -l -b $* -p $(notdir $*) $<
491d7110 RZ	323	cp $@ $@_shipped
1da177e4 LT	324
1da177e4 LT	325	lex.%.c: %.l
491d7110 RZ	326	flex -L -P$(notdir $*) -o$@ $<
491d7110 RZ	327	cp $@ $@_shipped
1da177e4	328
7a88488b RZ	329	%.hash.c: %.gperf
	330	gperf < $< > $@
	331	cp $@ $@_shipped
	332
1da177e4	333	endif