[GitHub/mt8127/android_kernel_alcatel_ttab.git] / include / linux / phy.h

/*
 * include/linux/phy.h
 *
 * Framework and drivers for configuring and reading different PHYs
 * Based on code in sungem_phy.c and gianfar_phy.c
 *
 * Author: Andy Fleming
 *
 * Copyright (c) 2004 Freescale Semiconductor, Inc.
 *
 * This program is free software; you can redistribute  it and/or modify it
 * under  the terms of  the GNU General  Public License as published by the
 * Free Software Foundation;  either version 2 of the  License, or (at your
 * option) any later version.
 *
 */

#ifndef __PHY_H
#define __PHY_H

#include <linux/spinlock.h>
#include <linux/device.h>
#include <linux/ethtool.h>
#include <linux/mii.h>
#include <linux/timer.h>
#include <linux/workqueue.h>

#define PHY_BASIC_FEATURES	(SUPPORTED_10baseT_Half | \
				 SUPPORTED_10baseT_Full | \
				 SUPPORTED_100baseT_Half | \
				 SUPPORTED_100baseT_Full | \
				 SUPPORTED_Autoneg | \
				 SUPPORTED_TP | \
				 SUPPORTED_MII)

#define PHY_GBIT_FEATURES	(PHY_BASIC_FEATURES | \
				 SUPPORTED_1000baseT_Half | \
				 SUPPORTED_1000baseT_Full)

/* Set phydev->irq to PHY_POLL if interrupts are not supported,
 * or not desired for this PHY.  Set to PHY_IGNORE_INTERRUPT if
 * the attached driver handles the interrupt
 */
#define PHY_POLL		-1
#define PHY_IGNORE_INTERRUPT	-2

#define PHY_HAS_INTERRUPT	0x00000001
#define PHY_HAS_MAGICANEG	0x00000002

/* Interface Mode definitions */
typedef enum {
	PHY_INTERFACE_MODE_MII,
	PHY_INTERFACE_MODE_GMII,
	PHY_INTERFACE_MODE_SGMII,
	PHY_INTERFACE_MODE_TBI,
	PHY_INTERFACE_MODE_RMII,
	PHY_INTERFACE_MODE_RGMII,
	PHY_INTERFACE_MODE_RTBI
} phy_interface_t;

#define MII_BUS_MAX 4


#define PHY_INIT_TIMEOUT	100000
#define PHY_STATE_TIME		1
#define PHY_FORCE_TIMEOUT	10
#define PHY_AN_TIMEOUT		10

#define PHY_MAX_ADDR	32

/* Used when trying to connect to a specific phy (mii bus id:phy device id) */
#define PHY_ID_FMT "%x:%02x"

/* The Bus class for PHYs.  Devices which provide access to
 * PHYs should register using this structure */
struct mii_bus {
	const char *name;
	int id;
	void *priv;
	int (*read)(struct mii_bus *bus, int phy_id, int regnum);
	int (*write)(struct mii_bus *bus, int phy_id, int regnum, u16 val);
	int (*reset)(struct mii_bus *bus);

	/* A lock to ensure that only one thing can read/write
	 * the MDIO bus at a time */
	spinlock_t mdio_lock;

	struct device *dev;

	/* list of all PHYs on bus */
	struct phy_device *phy_map[PHY_MAX_ADDR];

	/* Phy addresses to be ignored when probing */
	u32 phy_mask;

	/* Pointer to an array of interrupts, each PHY's
	 * interrupt at the index matching its address */
	int *irq;
};

#define PHY_INTERRUPT_DISABLED	0x0
#define PHY_INTERRUPT_ENABLED	0x80000000

/* PHY state machine states:
 *
 * DOWN: PHY device and driver are not ready for anything.  probe
 * should be called if and only if the PHY is in this state,
 * given that the PHY device exists.
 * - PHY driver probe function will, depending on the PHY, set
 * the state to STARTING or READY
 *
 * STARTING:  PHY device is coming up, and the ethernet driver is
 * not ready.  PHY drivers may set this in the probe function.
 * If they do, they are responsible for making sure the state is
 * eventually set to indicate whether the PHY is UP or READY,
 * depending on the state when the PHY is done starting up.
 * - PHY driver will set the state to READY
 * - start will set the state to PENDING
 *
 * READY: PHY is ready to send and receive packets, but the
 * controller is not.  By default, PHYs which do not implement
 * probe will be set to this state by phy_probe().  If the PHY
 * driver knows the PHY is ready, and the PHY state is STARTING,
 * then it sets this STATE.
 * - start will set the state to UP
 *
 * PENDING: PHY device is coming up, but the ethernet driver is
 * ready.  phy_start will set this state if the PHY state is
 * STARTING.
 * - PHY driver will set the state to UP when the PHY is ready
 *
 * UP: The PHY and attached device are ready to do work.
 * Interrupts should be started here.
 * - timer moves to AN
 *
 * AN: The PHY is currently negotiating the link state.  Link is
 * therefore down for now.  phy_timer will set this state when it
 * detects the state is UP.  config_aneg will set this state
 * whenever called with phydev->autoneg set to AUTONEG_ENABLE.
 * - If autonegotiation finishes, but there's no link, it sets
 *   the state to NOLINK.
 * - If aneg finishes with link, it sets the state to RUNNING,
 *   and calls adjust_link
 * - If autonegotiation did not finish after an arbitrary amount
 *   of time, autonegotiation should be tried again if the PHY
 *   supports "magic" autonegotiation (back to AN)
 * - If it didn't finish, and no magic_aneg, move to FORCING.
 *
 * NOLINK: PHY is up, but not currently plugged in.
 * - If the timer notes that the link comes back, we move to RUNNING
 * - config_aneg moves to AN
 * - phy_stop moves to HALTED
 *
 * FORCING: PHY is being configured with forced settings
 * - if link is up, move to RUNNING
 * - If link is down, we drop to the next highest setting, and
 *   retry (FORCING) after a timeout
 * - phy_stop moves to HALTED
 *
 * RUNNING: PHY is currently up, running, and possibly sending
 * and/or receiving packets
 * - timer will set CHANGELINK if we're polling (this ensures the
 *   link state is polled every other cycle of this state machine,
 *   which makes it every other second)
 * - irq will set CHANGELINK
 * - config_aneg will set AN
 * - phy_stop moves to HALTED
 *
 * CHANGELINK: PHY experienced a change in link state
 * - timer moves to RUNNING if link
 * - timer moves to NOLINK if the link is down
 * - phy_stop moves to HALTED
 *
 * HALTED: PHY is up, but no polling or interrupts are done. Or
 * PHY is in an error state.
 *
 * - phy_start moves to RESUMING
 *
 * RESUMING: PHY was halted, but now wants to run again.
 * - If we are forcing, or aneg is done, timer moves to RUNNING
 * - If aneg is not done, timer moves to AN
 * - phy_stop moves to HALTED
 */
enum phy_state {
	PHY_DOWN=0,
	PHY_STARTING,
	PHY_READY,
	PHY_PENDING,
	PHY_UP,
	PHY_AN,
	PHY_RUNNING,
	PHY_NOLINK,
	PHY_FORCING,
	PHY_CHANGELINK,
	PHY_HALTED,
	PHY_RESUMING
};

/* phy_device: An instance of a PHY
 *
 * drv: Pointer to the driver for this PHY instance
 * bus: Pointer to the bus this PHY is on
 * dev: driver model device structure for this PHY
 * phy_id: UID for this device found during discovery
 * state: state of the PHY for management purposes
 * dev_flags: Device-specific flags used by the PHY driver.
 * addr: Bus address of PHY
 * link_timeout: The number of timer firings to wait before the
 * giving up on the current attempt at acquiring a link
 * irq: IRQ number of the PHY's interrupt (-1 if none)
 * phy_timer: The timer for handling the state machine
 * phy_queue: A work_queue for the interrupt
 * attached_dev: The attached enet driver's device instance ptr
 * adjust_link: Callback for the enet controller to respond to
 * changes in the link state.
 * adjust_state: Callback for the enet driver to respond to
 * changes in the state machine.
 *
 * speed, duplex, pause, supported, advertising, and
 * autoneg are used like in mii_if_info
 *
 * interrupts currently only supports enabled or disabled,
 * but could be changed in the future to support enabling
 * and disabling specific interrupts
 *
 * Contains some infrastructure for polling and interrupt
 * handling, as well as handling shifts in PHY hardware state
 */
struct phy_device {
	/* Information about the PHY type */
	/* And management functions */
	struct phy_driver *drv;

	struct mii_bus *bus;

	struct device dev;

	u32 phy_id;

	enum phy_state state;

	u32 dev_flags;

	phy_interface_t interface;

	/* Bus address of the PHY (0-32) */
	int addr;

	/* forced speed & duplex (no autoneg)
	 * partner speed & duplex & pause (autoneg)
	 */
	int speed;
	int duplex;
	int pause;
	int asym_pause;

	/* The most recently read link state */
	int link;

	/* Enabled Interrupts */
	u32 interrupts;

	/* Union of PHY and Attached devices' supported modes */
	/* See mii.h for more info */
	u32 supported;
	u32 advertising;

	int autoneg;

	int link_timeout;

	/* Interrupt number for this PHY
	 * -1 means no interrupt */
	int irq;

	/* private data pointer */
	/* For use by PHYs to maintain extra state */
	void *priv;

	/* Interrupt and Polling infrastructure */
	struct work_struct phy_queue;
	struct timer_list phy_timer;

	spinlock_t lock;

	struct net_device *attached_dev;

	void (*adjust_link)(struct net_device *dev);

	void (*adjust_state)(struct net_device *dev);
};
#define to_phy_device(d) container_of(d, struct phy_device, dev)

/* struct phy_driver: Driver structure for a particular PHY type
 *
 * phy_id: The result of reading the UID registers of this PHY
 *   type, and ANDing them with the phy_id_mask.  This driver
 *   only works for PHYs with IDs which match this field
 * name: The friendly name of this PHY type
 * phy_id_mask: Defines the important bits of the phy_id
 * features: A list of features (speed, duplex, etc) supported
 *   by this PHY
 * flags: A bitfield defining certain other features this PHY
 *   supports (like interrupts)
 *
 * The drivers must implement config_aneg and read_status.  All
 * other functions are optional. Note that none of these
 * functions should be called from interrupt time.  The goal is
 * for the bus read/write functions to be able to block when the
 * bus transaction is happening, and be freed up by an interrupt
 * (The MPC85xx has this ability, though it is not currently
 * supported in the driver).
 */
struct phy_driver {
	u32 phy_id;
	char *name;
	unsigned int phy_id_mask;
	u32 features;
	u32 flags;

	/* Called to initialize the PHY,
	 * including after a reset */
	int (*config_init)(struct phy_device *phydev);

	/* Called during discovery.  Used to set
	 * up device-specific structures, if any */
	int (*probe)(struct phy_device *phydev);

	/* PHY Power Management */
	int (*suspend)(struct phy_device *phydev);
	int (*resume)(struct phy_device *phydev);

	/* Configures the advertisement and resets
	 * autonegotiation if phydev->autoneg is on,
	 * forces the speed to the current settings in phydev
	 * if phydev->autoneg is off */
	int (*config_aneg)(struct phy_device *phydev);

	/* Determines the negotiated speed and duplex */
	int (*read_status)(struct phy_device *phydev);

	/* Clears any pending interrupts */
	int (*ack_interrupt)(struct phy_device *phydev);

	/* Enables or disables interrupts */
	int (*config_intr)(struct phy_device *phydev);

	/* Clears up any memory if needed */
	void (*remove)(struct phy_device *phydev);

	struct device_driver driver;
};
#define to_phy_driver(d) container_of(d, struct phy_driver, driver)

int phy_read(struct phy_device *phydev, u16 regnum);
int phy_write(struct phy_device *phydev, u16 regnum, u16 val);
struct phy_device* get_phy_device(struct mii_bus *bus, int addr);
int phy_clear_interrupt(struct phy_device *phydev);
int phy_config_interrupt(struct phy_device *phydev, u32 interrupts);
struct phy_device * phy_attach(struct net_device *dev,
		const char *phy_id, u32 flags, phy_interface_t interface);
struct phy_device * phy_connect(struct net_device *dev, const char *phy_id,
		void (*handler)(struct net_device *), u32 flags,
		phy_interface_t interface);
void phy_disconnect(struct phy_device *phydev);
void phy_detach(struct phy_device *phydev);
void phy_start(struct phy_device *phydev);
void phy_stop(struct phy_device *phydev);
int phy_start_aneg(struct phy_device *phydev);

int mdiobus_register(struct mii_bus *bus);
void mdiobus_unregister(struct mii_bus *bus);
void phy_sanitize_settings(struct phy_device *phydev);
int phy_stop_interrupts(struct phy_device *phydev);

static inline int phy_read_status(struct phy_device *phydev) {
	return phydev->drv->read_status(phydev);
}

int genphy_config_advert(struct phy_device *phydev);
int genphy_setup_forced(struct phy_device *phydev);
int genphy_restart_aneg(struct phy_device *phydev);
int genphy_config_aneg(struct phy_device *phydev);
int genphy_update_link(struct phy_device *phydev);
int genphy_read_status(struct phy_device *phydev);
void phy_driver_unregister(struct phy_driver *drv);
int phy_driver_register(struct phy_driver *new_driver);
void phy_prepare_link(struct phy_device *phydev,
		void (*adjust_link)(struct net_device *));
void phy_start_machine(struct phy_device *phydev,
		void (*handler)(struct net_device *));
void phy_stop_machine(struct phy_device *phydev);
int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd);
int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd);
int phy_mii_ioctl(struct phy_device *phydev,
		struct mii_ioctl_data *mii_data, int cmd);
int phy_start_interrupts(struct phy_device *phydev);
void phy_print_status(struct phy_device *phydev);
struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id);

extern struct bus_type mdio_bus_type;
#endif /* __PHY_H */
Commit	Line	Data
00db8189 AF	1	/*
	2	* include/linux/phy.h
	3	*
	4	* Framework and drivers for configuring and reading different PHYs
	5	* Based on code in sungem_phy.c and gianfar_phy.c
	6	*
	7	* Author: Andy Fleming
	8	*
	9	* Copyright (c) 2004 Freescale Semiconductor, Inc.
	10	*
	11	* This program is free software; you can redistribute it and/or modify it
	12	* under the terms of the GNU General Public License as published by the
	13	* Free Software Foundation; either version 2 of the License, or (at your
	14	* option) any later version.
	15	*
	16	*/
	17
	18	#ifndef __PHY_H
	19	#define __PHY_H
	20
	21	#include <linux/spinlock.h>
	22	#include <linux/device.h>
13df29f6 MR	23	#include <linux/ethtool.h>
	24	#include <linux/mii.h>
	25	#include <linux/timer.h>
	26	#include <linux/workqueue.h>
00db8189 AF	27
	28	#define PHY_BASIC_FEATURES (SUPPORTED_10baseT_Half \| \
	29	SUPPORTED_10baseT_Full \| \
	30	SUPPORTED_100baseT_Half \| \
	31	SUPPORTED_100baseT_Full \| \
	32	SUPPORTED_Autoneg \| \
	33	SUPPORTED_TP \| \
	34	SUPPORTED_MII)
	35
	36	#define PHY_GBIT_FEATURES (PHY_BASIC_FEATURES \| \
	37	SUPPORTED_1000baseT_Half \| \
	38	SUPPORTED_1000baseT_Full)
	39
	40	/* Set phydev->irq to PHY_POLL if interrupts are not supported,
	41	* or not desired for this PHY. Set to PHY_IGNORE_INTERRUPT if
	42	* the attached driver handles the interrupt
	43	*/
	44	#define PHY_POLL -1
	45	#define PHY_IGNORE_INTERRUPT -2
	46
	47	#define PHY_HAS_INTERRUPT 0x00000001
	48	#define PHY_HAS_MAGICANEG 0x00000002
	49
e8a2b6a4 AF	50	/* Interface Mode definitions */
	51	typedef enum {
	52	PHY_INTERFACE_MODE_MII,
	53	PHY_INTERFACE_MODE_GMII,
	54	PHY_INTERFACE_MODE_SGMII,
	55	PHY_INTERFACE_MODE_TBI,
	56	PHY_INTERFACE_MODE_RMII,
	57	PHY_INTERFACE_MODE_RGMII,
	58	PHY_INTERFACE_MODE_RTBI
	59	} phy_interface_t;
	60
00db8189 AF	61	#define MII_BUS_MAX 4
	62
	63
e8a2b6a4	64	#define PHY_INIT_TIMEOUT 100000
00db8189 AF	65	#define PHY_STATE_TIME 1
	66	#define PHY_FORCE_TIMEOUT 10
	67	#define PHY_AN_TIMEOUT 10
	68
e8a2b6a4	69	#define PHY_MAX_ADDR 32
00db8189	70
a4d00f17 KG	71	/* Used when trying to connect to a specific phy (mii bus id:phy device id) */
	72	#define PHY_ID_FMT "%x:%02x"
	73
00db8189 AF	74	/* The Bus class for PHYs. Devices which provide access to
	75	* PHYs should register using this structure */
	76	struct mii_bus {
	77	const char *name;
	78	int id;
	79	void *priv;
	80	int (read)(struct mii_bus bus, int phy_id, int regnum);
	81	int (write)(struct mii_bus bus, int phy_id, int regnum, u16 val);
	82	int (reset)(struct mii_bus bus);
	83
	84	/* A lock to ensure that only one thing can read/write
	85	* the MDIO bus at a time */
	86	spinlock_t mdio_lock;
	87
	88	struct device *dev;
	89
	90	/* list of all PHYs on bus */
	91	struct phy_device *phy_map[PHY_MAX_ADDR];
	92
f896424c MP	93	/* Phy addresses to be ignored when probing */
	94	u32 phy_mask;
	95
00db8189 AF	96	/* Pointer to an array of interrupts, each PHY's
	97	* interrupt at the index matching its address */
	98	int *irq;
	99	};
	100
e8a2b6a4 AF	101	#define PHY_INTERRUPT_DISABLED 0x0
e8a2b6a4 AF	102	#define PHY_INTERRUPT_ENABLED 0x80000000
00db8189 AF	103
	104	/* PHY state machine states:
	105	*
	106	* DOWN: PHY device and driver are not ready for anything. probe
	107	* should be called if and only if the PHY is in this state,
	108	* given that the PHY device exists.
	109	* - PHY driver probe function will, depending on the PHY, set
	110	* the state to STARTING or READY
	111	*
	112	* STARTING: PHY device is coming up, and the ethernet driver is
	113	* not ready. PHY drivers may set this in the probe function.
	114	* If they do, they are responsible for making sure the state is
	115	* eventually set to indicate whether the PHY is UP or READY,
	116	* depending on the state when the PHY is done starting up.
	117	* - PHY driver will set the state to READY
	118	* - start will set the state to PENDING
	119	*
	120	* READY: PHY is ready to send and receive packets, but the
	121	* controller is not. By default, PHYs which do not implement
	122	* probe will be set to this state by phy_probe(). If the PHY
	123	* driver knows the PHY is ready, and the PHY state is STARTING,
	124	* then it sets this STATE.
	125	* - start will set the state to UP
	126	*
	127	* PENDING: PHY device is coming up, but the ethernet driver is
	128	* ready. phy_start will set this state if the PHY state is
	129	* STARTING.
	130	* - PHY driver will set the state to UP when the PHY is ready
	131	*
	132	* UP: The PHY and attached device are ready to do work.
	133	* Interrupts should be started here.
	134	* - timer moves to AN
	135	*
	136	* AN: The PHY is currently negotiating the link state. Link is
	137	* therefore down for now. phy_timer will set this state when it
	138	* detects the state is UP. config_aneg will set this state
	139	* whenever called with phydev->autoneg set to AUTONEG_ENABLE.
	140	* - If autonegotiation finishes, but there's no link, it sets
	141	* the state to NOLINK.
	142	* - If aneg finishes with link, it sets the state to RUNNING,
	143	* and calls adjust_link
	144	* - If autonegotiation did not finish after an arbitrary amount
	145	* of time, autonegotiation should be tried again if the PHY
	146	* supports "magic" autonegotiation (back to AN)
	147	* - If it didn't finish, and no magic_aneg, move to FORCING.
	148	*
	149	* NOLINK: PHY is up, but not currently plugged in.
	150	* - If the timer notes that the link comes back, we move to RUNNING
	151	* - config_aneg moves to AN
	152	* - phy_stop moves to HALTED
	153	*
	154	* FORCING: PHY is being configured with forced settings
	155	* - if link is up, move to RUNNING
	156	* - If link is down, we drop to the next highest setting, and
	157	* retry (FORCING) after a timeout
	158	* - phy_stop moves to HALTED
	159	*
	160	* RUNNING: PHY is currently up, running, and possibly sending
	161	* and/or receiving packets
	162	* - timer will set CHANGELINK if we're polling (this ensures the
	163	* link state is polled every other cycle of this state machine,
	164	* which makes it every other second)
	165	* - irq will set CHANGELINK
	166	* - config_aneg will set AN
167	* - phy_stop moves to HALTED
168	*
169	* CHANGELINK: PHY experienced a change in link state
170	* - timer moves to RUNNING if link
171	* - timer moves to NOLINK if the link is down
172	* - phy_stop moves to HALTED
173	*
174	* HALTED: PHY is up, but no polling or interrupts are done. Or
175	* PHY is in an error state.
176	*
177	* - phy_start moves to RESUMING
178	*
179	* RESUMING: PHY was halted, but now wants to run again.
180	* - If we are forcing, or aneg is done, timer moves to RUNNING
181	* - If aneg is not done, timer moves to AN
182	* - phy_stop moves to HALTED
183	*/
184	enum phy_state {
185	PHY_DOWN=0,
186	PHY_STARTING,
187	PHY_READY,
188	PHY_PENDING,
189	PHY_UP,
190	PHY_AN,
191	PHY_RUNNING,
192	PHY_NOLINK,
193	PHY_FORCING,
194	PHY_CHANGELINK,
195	PHY_HALTED,
196	PHY_RESUMING
197	};
198
199	/* phy_device: An instance of a PHY
200	*
201	* drv: Pointer to the driver for this PHY instance
202	* bus: Pointer to the bus this PHY is on
203	* dev: driver model device structure for this PHY
204	* phy_id: UID for this device found during discovery
205	* state: state of the PHY for management purposes
206	* dev_flags: Device-specific flags used by the PHY driver.
207	* addr: Bus address of PHY
208	* link_timeout: The number of timer firings to wait before the
209	* giving up on the current attempt at acquiring a link
210	* irq: IRQ number of the PHY's interrupt (-1 if none)
211	* phy_timer: The timer for handling the state machine
212	* phy_queue: A work_queue for the interrupt
213	* attached_dev: The attached enet driver's device instance ptr
214	* adjust_link: Callback for the enet controller to respond to
215	* changes in the link state.
216	* adjust_state: Callback for the enet driver to respond to
217	* changes in the state machine.
218	*
219	* speed, duplex, pause, supported, advertising, and
220	* autoneg are used like in mii_if_info
221	*
222	* interrupts currently only supports enabled or disabled,
223	* but could be changed in the future to support enabling
224	* and disabling specific interrupts
225	*
226	* Contains some infrastructure for polling and interrupt
227	* handling, as well as handling shifts in PHY hardware state
228	*/
229	struct phy_device {
230	/* Information about the PHY type */
231	/* And management functions */
232	struct phy_driver *drv;
233
234	struct mii_bus *bus;
235
236	struct device dev;
237
238	u32 phy_id;
239
240	enum phy_state state;
241
242	u32 dev_flags;
243
e8a2b6a4 AF	244	phy_interface_t interface;
e8a2b6a4 AF	245
00db8189 AF	246	/* Bus address of the PHY (0-32) */
	247	int addr;
	248
	249	/* forced speed & duplex (no autoneg)
	250	* partner speed & duplex & pause (autoneg)
	251	*/
	252	int speed;
	253	int duplex;
	254	int pause;
	255	int asym_pause;
	256
	257	/* The most recently read link state */
	258	int link;
	259
	260	/* Enabled Interrupts */
	261	u32 interrupts;
	262
	263	/* Union of PHY and Attached devices' supported modes */
	264	/* See mii.h for more info */
	265	u32 supported;
	266	u32 advertising;
	267
	268	int autoneg;
	269
	270	int link_timeout;
	271
	272	/* Interrupt number for this PHY
	273	* -1 means no interrupt */
	274	int irq;
	275
	276	/* private data pointer */
	277	/* For use by PHYs to maintain extra state */
	278	void *priv;
	279
	280	/* Interrupt and Polling infrastructure */
	281	struct work_struct phy_queue;
	282	struct timer_list phy_timer;
	283
	284	spinlock_t lock;
	285
	286	struct net_device *attached_dev;
	287
	288	void (adjust_link)(struct net_device dev);
	289
	290	void (adjust_state)(struct net_device dev);
	291	};
	292	#define to_phy_device(d) container_of(d, struct phy_device, dev)
	293
	294	/* struct phy_driver: Driver structure for a particular PHY type
	295	*
	296	* phy_id: The result of reading the UID registers of this PHY
	297	* type, and ANDing them with the phy_id_mask. This driver
	298	* only works for PHYs with IDs which match this field
	299	* name: The friendly name of this PHY type
	300	* phy_id_mask: Defines the important bits of the phy_id
	301	* features: A list of features (speed, duplex, etc) supported
	302	* by this PHY
	303	* flags: A bitfield defining certain other features this PHY
	304	* supports (like interrupts)
	305	*
	306	* The drivers must implement config_aneg and read_status. All
	307	* other functions are optional. Note that none of these
	308	* functions should be called from interrupt time. The goal is
	309	* for the bus read/write functions to be able to block when the
310	* bus transaction is happening, and be freed up by an interrupt
311	* (The MPC85xx has this ability, though it is not currently
312	* supported in the driver).
313	*/
314	struct phy_driver {
315	u32 phy_id;
316	char *name;
317	unsigned int phy_id_mask;
318	u32 features;
319	u32 flags;
320
321	/* Called to initialize the PHY,
322	* including after a reset */
323	int (config_init)(struct phy_device phydev);
324
325	/* Called during discovery. Used to set
326	* up device-specific structures, if any */
327	int (probe)(struct phy_device phydev);
328
329	/* PHY Power Management */
330	int (suspend)(struct phy_device phydev);
331	int (resume)(struct phy_device phydev);
332
333	/* Configures the advertisement and resets
334	* autonegotiation if phydev->autoneg is on,
335	* forces the speed to the current settings in phydev
336	* if phydev->autoneg is off */
337	int (config_aneg)(struct phy_device phydev);
338
339	/* Determines the negotiated speed and duplex */
340	int (read_status)(struct phy_device phydev);
341
342	/* Clears any pending interrupts */
343	int (ack_interrupt)(struct phy_device phydev);
344
345	/* Enables or disables interrupts */
346	int (config_intr)(struct phy_device phydev);
347
348	/* Clears up any memory if needed */
349	void (remove)(struct phy_device phydev);
350
351	struct device_driver driver;
352	};
353	#define to_phy_driver(d) container_of(d, struct phy_driver, driver)
354
355	int phy_read(struct phy_device *phydev, u16 regnum);
356	int phy_write(struct phy_device *phydev, u16 regnum, u16 val);
357	struct phy_device* get_phy_device(struct mii_bus *bus, int addr);
358	int phy_clear_interrupt(struct phy_device *phydev);
359	int phy_config_interrupt(struct phy_device *phydev, u32 interrupts);
e1393456	360	struct phy_device * phy_attach(struct net_device *dev,
e8a2b6a4	361	const char *phy_id, u32 flags, phy_interface_t interface);
e1393456	362	struct phy_device * phy_connect(struct net_device dev, const char phy_id,
e8a2b6a4 AF	363	void (handler)(struct net_device ), u32 flags,
e8a2b6a4 AF	364	phy_interface_t interface);
e1393456 AF	365	void phy_disconnect(struct phy_device *phydev);
	366	void phy_detach(struct phy_device *phydev);
	367	void phy_start(struct phy_device *phydev);
	368	void phy_stop(struct phy_device *phydev);
	369	int phy_start_aneg(struct phy_device *phydev);
	370
	371	int mdiobus_register(struct mii_bus *bus);
	372	void mdiobus_unregister(struct mii_bus *bus);
	373	void phy_sanitize_settings(struct phy_device *phydev);
	374	int phy_stop_interrupts(struct phy_device *phydev);
00db8189 AF	375
	376	static inline int phy_read_status(struct phy_device *phydev) {
	377	return phydev->drv->read_status(phydev);
	378	}
	379
e1393456	380	int genphy_config_advert(struct phy_device *phydev);
00db8189 AF	381	int genphy_setup_forced(struct phy_device *phydev);
	382	int genphy_restart_aneg(struct phy_device *phydev);
	383	int genphy_config_aneg(struct phy_device *phydev);
	384	int genphy_update_link(struct phy_device *phydev);
	385	int genphy_read_status(struct phy_device *phydev);
	386	void phy_driver_unregister(struct phy_driver *drv);
	387	int phy_driver_register(struct phy_driver *new_driver);
	388	void phy_prepare_link(struct phy_device *phydev,
	389	void (adjust_link)(struct net_device ));
	390	void phy_start_machine(struct phy_device *phydev,
	391	void (handler)(struct net_device ));
	392	void phy_stop_machine(struct phy_device *phydev);
	393	int phy_ethtool_sset(struct phy_device phydev, struct ethtool_cmd cmd);
	394	int phy_ethtool_gset(struct phy_device phydev, struct ethtool_cmd cmd);
	395	int phy_mii_ioctl(struct phy_device *phydev,
	396	struct mii_ioctl_data *mii_data, int cmd);
e1393456 AF	397	int phy_start_interrupts(struct phy_device *phydev);
e1393456 AF	398	void phy_print_status(struct phy_device *phydev);
11b0bacd	399	struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id);
00db8189 AF	400
00db8189 AF	401	extern struct bus_type mdio_bus_type;
00db8189	402	#endif /* __PHY_H */