[GitHub/mt8127/android_kernel_alcatel_ttab.git] / include / linux / ethtool.h

/*
 * ethtool.h: Defines for Linux ethtool.
 *
 * Copyright (C) 1998 David S. Miller (davem@redhat.com)
 * Copyright 2001 Jeff Garzik <jgarzik@pobox.com>
 * Portions Copyright 2001 Sun Microsystems (thockin@sun.com)
 * Portions Copyright 2002 Intel (eli.kupermann@intel.com,
 *                                christopher.leech@intel.com,
 *                                scott.feldman@intel.com)
 * Portions Copyright (C) Sun Microsystems 2008
 */
#ifndef _LINUX_ETHTOOL_H
#define _LINUX_ETHTOOL_H

#include <linux/compat.h>
#include <uapi/linux/ethtool.h>

#ifdef CONFIG_COMPAT

struct compat_ethtool_rx_flow_spec {
	u32		flow_type;
	union ethtool_flow_union h_u;
	struct ethtool_flow_ext h_ext;
	union ethtool_flow_union m_u;
	struct ethtool_flow_ext m_ext;
	compat_u64	ring_cookie;
	u32		location;
};

struct compat_ethtool_rxnfc {
	u32				cmd;
	u32				flow_type;
	compat_u64			data;
	struct compat_ethtool_rx_flow_spec fs;
	u32				rule_cnt;
	u32				rule_locs[0];
};

#endif /* CONFIG_COMPAT */

#include <linux/rculist.h>

extern int __ethtool_get_settings(struct net_device *dev,
				  struct ethtool_cmd *cmd);

/**
 * enum ethtool_phys_id_state - indicator state for physical identification
 * @ETHTOOL_ID_INACTIVE: Physical ID indicator should be deactivated
 * @ETHTOOL_ID_ACTIVE: Physical ID indicator should be activated
 * @ETHTOOL_ID_ON: LED should be turned on (used iff %ETHTOOL_ID_ACTIVE
 *	is not supported)
 * @ETHTOOL_ID_OFF: LED should be turned off (used iff %ETHTOOL_ID_ACTIVE
 *	is not supported)
 */
enum ethtool_phys_id_state {
	ETHTOOL_ID_INACTIVE,
	ETHTOOL_ID_ACTIVE,
	ETHTOOL_ID_ON,
	ETHTOOL_ID_OFF
};

struct net_device;

/* Some generic methods drivers may use in their ethtool_ops */
u32 ethtool_op_get_link(struct net_device *dev);
int ethtool_op_get_ts_info(struct net_device *dev, struct ethtool_ts_info *eti);

/**
 * ethtool_rxfh_indir_default - get default value for RX flow hash indirection
 * @index: Index in RX flow hash indirection table
 * @n_rx_rings: Number of RX rings to use
 *
 * This function provides the default policy for RX flow hash indirection.
 */
static inline u32 ethtool_rxfh_indir_default(u32 index, u32 n_rx_rings)
{
	return index % n_rx_rings;
}

/**
 * struct ethtool_ops - optional netdev operations
 * @get_settings: Get various device settings including Ethernet link
 *	settings. The @cmd parameter is expected to have been cleared
 *	before get_settings is called. Returns a negative error code or
 *	zero.
 * @set_settings: Set various device settings including Ethernet link
 *	settings.  Returns a negative error code or zero.
 * @get_drvinfo: Report driver/device information.  Should only set the
 *	@driver, @version, @fw_version and @bus_info fields.  If not
 *	implemented, the @driver and @bus_info fields will be filled in
 *	according to the netdev's parent device.
 * @get_regs_len: Get buffer length required for @get_regs
 * @get_regs: Get device registers
 * @get_wol: Report whether Wake-on-Lan is enabled
 * @set_wol: Turn Wake-on-Lan on or off.  Returns a negative error code
 *	or zero.
 * @get_msglevel: Report driver message level.  This should be the value
 *	of the @msg_enable field used by netif logging functions.
 * @set_msglevel: Set driver message level
 * @nway_reset: Restart autonegotiation.  Returns a negative error code
 *	or zero.
 * @get_link: Report whether physical link is up.  Will only be called if
 *	the netdev is up.  Should usually be set to ethtool_op_get_link(),
 *	which uses netif_carrier_ok().
 * @get_eeprom: Read data from the device EEPROM.
 *	Should fill in the magic field.  Don't need to check len for zero
 *	or wraparound.  Fill in the data argument with the eeprom values
 *	from offset to offset + len.  Update len to the amount read.
 *	Returns an error or zero.
 * @set_eeprom: Write data to the device EEPROM.
 *	Should validate the magic field.  Don't need to check len for zero
 *	or wraparound.  Update len to the amount written.  Returns an error
 *	or zero.
 * @get_coalesce: Get interrupt coalescing parameters.  Returns a negative
 *	error code or zero.
 * @set_coalesce: Set interrupt coalescing parameters.  Returns a negative
 *	error code or zero.
 * @get_ringparam: Report ring sizes
 * @set_ringparam: Set ring sizes.  Returns a negative error code or zero.
 * @get_pauseparam: Report pause parameters
 * @set_pauseparam: Set pause parameters.  Returns a negative error code
 *	or zero.
 * @self_test: Run specified self-tests
 * @get_strings: Return a set of strings that describe the requested objects
 * @set_phys_id: Identify the physical devices, e.g. by flashing an LED
 *	attached to it.  The implementation may update the indicator
 *	asynchronously or synchronously, but in either case it must return
 *	quickly.  It is initially called with the argument %ETHTOOL_ID_ACTIVE,
 *	and must either activate asynchronous updates and return zero, return
 *	a negative error or return a positive frequency for synchronous
 *	indication (e.g. 1 for one on/off cycle per second).  If it returns
 *	a frequency then it will be called again at intervals with the
 *	argument %ETHTOOL_ID_ON or %ETHTOOL_ID_OFF and should set the state of
 *	the indicator accordingly.  Finally, it is called with the argument
 *	%ETHTOOL_ID_INACTIVE and must deactivate the indicator.  Returns a
 *	negative error code or zero.
 * @get_ethtool_stats: Return extended statistics about the device.
 *	This is only useful if the device maintains statistics not
 *	included in &struct rtnl_link_stats64.
 * @begin: Function to be called before any other operation.  Returns a
 *	negative error code or zero.
 * @complete: Function to be called after any other operation except
 *	@begin.  Will be called even if the other operation failed.
 * @get_priv_flags: Report driver-specific feature flags.
 * @set_priv_flags: Set driver-specific feature flags.  Returns a negative
 *	error code or zero.
 * @get_sset_count: Get number of strings that @get_strings will write.
 * @get_rxnfc: Get RX flow classification rules.  Returns a negative
 *	error code or zero.
 * @set_rxnfc: Set RX flow classification rules.  Returns a negative
 *	error code or zero.
 * @flash_device: Write a firmware image to device's flash memory.
 *	Returns a negative error code or zero.
 * @reset: Reset (part of) the device, as specified by a bitmask of
 *	flags from &enum ethtool_reset_flags.  Returns a negative
 *	error code or zero.
 * @get_rxfh_indir_size: Get the size of the RX flow hash indirection table.
 *	Returns zero if not supported for this specific device.
 * @get_rxfh_indir: Get the contents of the RX flow hash indirection table.
 *	Will not be called if @get_rxfh_indir_size returns zero.
 *	Returns a negative error code or zero.
 * @set_rxfh_indir: Set the contents of the RX flow hash indirection table.
 *	Will not be called if @get_rxfh_indir_size returns zero.
 *	Returns a negative error code or zero.
 * @get_channels: Get number of channels.
 * @set_channels: Set number of channels.  Returns a negative error code or
 *	zero.
 * @get_dump_flag: Get dump flag indicating current dump length, version,
 * 		   and flag of the device.
 * @get_dump_data: Get dump data.
 * @set_dump: Set dump specific flags to the device.
 * @get_ts_info: Get the time stamping and PTP hardware clock capabilities.
 *	Drivers supporting transmit time stamps in software should set this to
 *	ethtool_op_get_ts_info().
 * @get_module_info: Get the size and type of the eeprom contained within
 *	a plug-in module.
 * @get_module_eeprom: Get the eeprom information from the plug-in module
 * @get_eee: Get Energy-Efficient (EEE) supported and status.
 * @set_eee: Set EEE status (enable/disable) as well as LPI timers.
 *
 * All operations are optional (i.e. the function pointer may be set
 * to %NULL) and callers must take this into account.  Callers must
 * hold the RTNL lock.
 *
 * See the structures used by these operations for further documentation.
 *
 * See &struct net_device and &struct net_device_ops for documentation
 * of the generic netdev features interface.
 */
struct ethtool_ops {
	int	(*get_settings)(struct net_device *, struct ethtool_cmd *);
	int	(*set_settings)(struct net_device *, struct ethtool_cmd *);
	void	(*get_drvinfo)(struct net_device *, struct ethtool_drvinfo *);
	int	(*get_regs_len)(struct net_device *);
	void	(*get_regs)(struct net_device *, struct ethtool_regs *, void *);
	void	(*get_wol)(struct net_device *, struct ethtool_wolinfo *);
	int	(*set_wol)(struct net_device *, struct ethtool_wolinfo *);
	u32	(*get_msglevel)(struct net_device *);
	void	(*set_msglevel)(struct net_device *, u32);
	int	(*nway_reset)(struct net_device *);
	u32	(*get_link)(struct net_device *);
	int	(*get_eeprom_len)(struct net_device *);
	int	(*get_eeprom)(struct net_device *,
			      struct ethtool_eeprom *, u8 *);
	int	(*set_eeprom)(struct net_device *,
			      struct ethtool_eeprom *, u8 *);
	int	(*get_coalesce)(struct net_device *, struct ethtool_coalesce *);
	int	(*set_coalesce)(struct net_device *, struct ethtool_coalesce *);
	void	(*get_ringparam)(struct net_device *,
				 struct ethtool_ringparam *);
	int	(*set_ringparam)(struct net_device *,
				 struct ethtool_ringparam *);
	void	(*get_pauseparam)(struct net_device *,
				  struct ethtool_pauseparam*);
	int	(*set_pauseparam)(struct net_device *,
				  struct ethtool_pauseparam*);
	void	(*self_test)(struct net_device *, struct ethtool_test *, u64 *);
	void	(*get_strings)(struct net_device *, u32 stringset, u8 *);
	int	(*set_phys_id)(struct net_device *, enum ethtool_phys_id_state);
	void	(*get_ethtool_stats)(struct net_device *,
				     struct ethtool_stats *, u64 *);
	int	(*begin)(struct net_device *);
	void	(*complete)(struct net_device *);
	u32	(*get_priv_flags)(struct net_device *);
	int	(*set_priv_flags)(struct net_device *, u32);
	int	(*get_sset_count)(struct net_device *, int);
	int	(*get_rxnfc)(struct net_device *,
			     struct ethtool_rxnfc *, u32 *rule_locs);
	int	(*set_rxnfc)(struct net_device *, struct ethtool_rxnfc *);
	int	(*flash_device)(struct net_device *, struct ethtool_flash *);
	int	(*reset)(struct net_device *, u32 *);
	u32	(*get_rxfh_indir_size)(struct net_device *);
	int	(*get_rxfh_indir)(struct net_device *, u32 *);
	int	(*set_rxfh_indir)(struct net_device *, const u32 *);
	void	(*get_channels)(struct net_device *, struct ethtool_channels *);
	int	(*set_channels)(struct net_device *, struct ethtool_channels *);
	int	(*get_dump_flag)(struct net_device *, struct ethtool_dump *);
	int	(*get_dump_data)(struct net_device *,
				 struct ethtool_dump *, void *);
	int	(*set_dump)(struct net_device *, struct ethtool_dump *);
	int	(*get_ts_info)(struct net_device *, struct ethtool_ts_info *);
	int     (*get_module_info)(struct net_device *,
				   struct ethtool_modinfo *);
	int     (*get_module_eeprom)(struct net_device *,
				     struct ethtool_eeprom *, u8 *);
	int	(*get_eee)(struct net_device *, struct ethtool_eee *);
	int	(*set_eee)(struct net_device *, struct ethtool_eee *);


};
#endif /* _LINUX_ETHTOOL_H */
Commit	Line	Data
1da177e4 LT	1	/*
	2	* ethtool.h: Defines for Linux ethtool.
	3	*
	4	* Copyright (C) 1998 David S. Miller (davem@redhat.com)
	5	* Copyright 2001 Jeff Garzik <jgarzik@pobox.com>
	6	* Portions Copyright 2001 Sun Microsystems (thockin@sun.com)
	7	* Portions Copyright 2002 Intel (eli.kupermann@intel.com,
	8	* christopher.leech@intel.com,
	9	* scott.feldman@intel.com)
59089d8d	10	* Portions Copyright (C) Sun Microsystems 2008
1da177e4	11	*/
1da177e4 LT	12	#ifndef _LINUX_ETHTOOL_H
	13	#define _LINUX_ETHTOOL_H
	14
3a7da39d	15	#include <linux/compat.h>
607ca46e	16	#include <uapi/linux/ethtool.h>
3ae7c0b2	17
3a7da39d BH	18	#ifdef CONFIG_COMPAT
	19
	20	struct compat_ethtool_rx_flow_spec {
	21	u32 flow_type;
127fe533 AD	22	union ethtool_flow_union h_u;
	23	struct ethtool_flow_ext h_ext;
	24	union ethtool_flow_union m_u;
	25	struct ethtool_flow_ext m_ext;
3a7da39d BH	26	compat_u64 ring_cookie;
	27	u32 location;
	28	};
	29
	30	struct compat_ethtool_rxnfc {
	31	u32 cmd;
	32	u32 flow_type;
	33	compat_u64 data;
	34	struct compat_ethtool_rx_flow_spec fs;
	35	u32 rule_cnt;
	36	u32 rule_locs[0];
	37	};
	38
	39	#endif /* CONFIG_COMPAT */
c3ce7e20	40
a1467085 DM	41	#include <linux/rculist.h>
a1467085 DM	42
4bc71cb9 JP	43	extern int __ethtool_get_settings(struct net_device *dev,
	44	struct ethtool_cmd *cmd);
	45
68f512f2 BH	46	/**
	47	* enum ethtool_phys_id_state - indicator state for physical identification
	48	* @ETHTOOL_ID_INACTIVE: Physical ID indicator should be deactivated
	49	* @ETHTOOL_ID_ACTIVE: Physical ID indicator should be activated
	50	* @ETHTOOL_ID_ON: LED should be turned on (used iff %ETHTOOL_ID_ACTIVE
	51	* is not supported)
	52	* @ETHTOOL_ID_OFF: LED should be turned off (used iff %ETHTOOL_ID_ACTIVE
	53	* is not supported)
	54	*/
	55	enum ethtool_phys_id_state {
	56	ETHTOOL_ID_INACTIVE,
	57	ETHTOOL_ID_ACTIVE,
	58	ETHTOOL_ID_ON,
	59	ETHTOOL_ID_OFF
	60	};
	61
1da177e4 LT	62	struct net_device;
	63
	64	/* Some generic methods drivers may use in their ethtool_ops */
	65	u32 ethtool_op_get_link(struct net_device *dev);
02eacbd0	66	int ethtool_op_get_ts_info(struct net_device dev, struct ethtool_ts_info eti);
1da177e4	67
278bc429 BH	68	/**
	69	* ethtool_rxfh_indir_default - get default value for RX flow hash indirection
	70	* @index: Index in RX flow hash indirection table
	71	* @n_rx_rings: Number of RX rings to use
	72	*
	73	* This function provides the default policy for RX flow hash indirection.
	74	*/
	75	static inline u32 ethtool_rxfh_indir_default(u32 index, u32 n_rx_rings)
	76	{
	77	return index % n_rx_rings;
	78	}
	79
1da177e4	80	/**
8717d07b BH	81	* struct ethtool_ops - optional netdev operations
8717d07b BH	82	* @get_settings: Get various device settings including Ethernet link
8ae6daca DD	83	* settings. The @cmd parameter is expected to have been cleared
	84	* before get_settings is called. Returns a negative error code or
	85	* zero.
8717d07b BH	86	* @set_settings: Set various device settings including Ethernet link
	87	* settings. Returns a negative error code or zero.
	88	* @get_drvinfo: Report driver/device information. Should only set the
	89	* @driver, @version, @fw_version and @bus_info fields. If not
	90	* implemented, the @driver and @bus_info fields will be filled in
	91	* according to the netdev's parent device.
	92	* @get_regs_len: Get buffer length required for @get_regs
e20b5b61 BH	93	* @get_regs: Get device registers
e20b5b61 BH	94	* @get_wol: Report whether Wake-on-Lan is enabled
8717d07b BH	95	* @set_wol: Turn Wake-on-Lan on or off. Returns a negative error code
	96	* or zero.
	97	* @get_msglevel: Report driver message level. This should be the value
	98	* of the @msg_enable field used by netif logging functions.
e20b5b61	99	* @set_msglevel: Set driver message level
8717d07b BH	100	* @nway_reset: Restart autonegotiation. Returns a negative error code
	101	* or zero.
	102	* @get_link: Report whether physical link is up. Will only be called if
	103	* the netdev is up. Should usually be set to ethtool_op_get_link(),
	104	* which uses netif_carrier_ok().
e20b5b61	105	* @get_eeprom: Read data from the device EEPROM.
1da177e4 LT	106	* Should fill in the magic field. Don't need to check len for zero
	107	* or wraparound. Fill in the data argument with the eeprom values
	108	* from offset to offset + len. Update len to the amount read.
	109	* Returns an error or zero.
e20b5b61	110	* @set_eeprom: Write data to the device EEPROM.
1da177e4 LT	111	* Should validate the magic field. Don't need to check len for zero
	112	* or wraparound. Update len to the amount written. Returns an error
	113	* or zero.
8717d07b BH	114	* @get_coalesce: Get interrupt coalescing parameters. Returns a negative
	115	* error code or zero.
	116	* @set_coalesce: Set interrupt coalescing parameters. Returns a negative
	117	* error code or zero.
e20b5b61	118	* @get_ringparam: Report ring sizes
8717d07b	119	* @set_ringparam: Set ring sizes. Returns a negative error code or zero.
e20b5b61	120	* @get_pauseparam: Report pause parameters
8717d07b BH	121	* @set_pauseparam: Set pause parameters. Returns a negative error code
8717d07b BH	122	* or zero.
e20b5b61 BH	123	* @self_test: Run specified self-tests
e20b5b61 BH	124	* @get_strings: Return a set of strings that describe the requested objects
68f512f2 BH	125	* @set_phys_id: Identify the physical devices, e.g. by flashing an LED
	126	* attached to it. The implementation may update the indicator
	127	* asynchronously or synchronously, but in either case it must return
	128	* quickly. It is initially called with the argument %ETHTOOL_ID_ACTIVE,
fce55922 AB	129	* and must either activate asynchronous updates and return zero, return
	130	* a negative error or return a positive frequency for synchronous
	131	* indication (e.g. 1 for one on/off cycle per second). If it returns
	132	* a frequency then it will be called again at intervals with the
68f512f2 BH	133	* argument %ETHTOOL_ID_ON or %ETHTOOL_ID_OFF and should set the state of
	134	* the indicator accordingly. Finally, it is called with the argument
	135	* %ETHTOOL_ID_INACTIVE and must deactivate the indicator. Returns a
	136	* negative error code or zero.
8717d07b BH	137	* @get_ethtool_stats: Return extended statistics about the device.
	138	* This is only useful if the device maintains statistics not
	139	* included in &struct rtnl_link_stats64.
	140	* @begin: Function to be called before any other operation. Returns a
	141	* negative error code or zero.
	142	* @complete: Function to be called after any other operation except
	143	* @begin. Will be called even if the other operation failed.
8717d07b BH	144	* @get_priv_flags: Report driver-specific feature flags.
	145	* @set_priv_flags: Set driver-specific feature flags. Returns a negative
	146	* error code or zero.
	147	* @get_sset_count: Get number of strings that @get_strings will write.
	148	* @get_rxnfc: Get RX flow classification rules. Returns a negative
	149	* error code or zero.
	150	* @set_rxnfc: Set RX flow classification rules. Returns a negative
	151	* error code or zero.
	152	* @flash_device: Write a firmware image to device's flash memory.
	153	* Returns a negative error code or zero.
	154	* @reset: Reset (part of) the device, as specified by a bitmask of
	155	* flags from &enum ethtool_reset_flags. Returns a negative
	156	* error code or zero.
7850f63f BH	157	* @get_rxfh_indir_size: Get the size of the RX flow hash indirection table.
7850f63f BH	158	* Returns zero if not supported for this specific device.
8717d07b	159	* @get_rxfh_indir: Get the contents of the RX flow hash indirection table.
7850f63f	160	* Will not be called if @get_rxfh_indir_size returns zero.
8717d07b BH	161	* Returns a negative error code or zero.
8717d07b BH	162	* @set_rxfh_indir: Set the contents of the RX flow hash indirection table.
7850f63f	163	* Will not be called if @get_rxfh_indir_size returns zero.
8717d07b	164	* Returns a negative error code or zero.
8b5933c3	165	* @get_channels: Get number of channels.
	166	* @set_channels: Set number of channels. Returns a negative error code or
	167	* zero.
29dd54b7 AC	168	* @get_dump_flag: Get dump flag indicating current dump length, version,
	169	* and flag of the device.
	170	* @get_dump_data: Get dump data.
	171	* @set_dump: Set dump specific flags to the device.
c8f3a8c3 RC	172	* @get_ts_info: Get the time stamping and PTP hardware clock capabilities.
	173	* Drivers supporting transmit time stamps in software should set this to
	174	* ethtool_op_get_ts_info().
41c3cb6d SH	175	* @get_module_info: Get the size and type of the eeprom contained within
	176	* a plug-in module.
	177	* @get_module_eeprom: Get the eeprom information from the plug-in module
80f12ecc YM	178	* @get_eee: Get Energy-Efficient (EEE) supported and status.
80f12ecc YM	179	* @set_eee: Set EEE status (enable/disable) as well as LPI timers.
8717d07b BH	180	*
	181	* All operations are optional (i.e. the function pointer may be set
	182	* to %NULL) and callers must take this into account. Callers must
b4f79e5c	183	* hold the RTNL lock.
8717d07b BH	184	*
	185	* See the structures used by these operations for further documentation.
	186	*
	187	* See &struct net_device and &struct net_device_ops for documentation
	188	* of the generic netdev features interface.
1da177e4 LT	189	*/
	190	struct ethtool_ops {
	191	int (get_settings)(struct net_device , struct ethtool_cmd *);
	192	int (set_settings)(struct net_device , struct ethtool_cmd *);
	193	void (get_drvinfo)(struct net_device , struct ethtool_drvinfo *);
	194	int (get_regs_len)(struct net_device );
	195	void (get_regs)(struct net_device , struct ethtool_regs , void );
	196	void (get_wol)(struct net_device , struct ethtool_wolinfo *);
	197	int (set_wol)(struct net_device , struct ethtool_wolinfo *);
	198	u32 (get_msglevel)(struct net_device );
	199	void (set_msglevel)(struct net_device , u32);
	200	int (nway_reset)(struct net_device );
	201	u32 (get_link)(struct net_device );
	202	int (get_eeprom_len)(struct net_device );
97f8aefb	203	int (get_eeprom)(struct net_device ,
	204	struct ethtool_eeprom , u8 );
	205	int (set_eeprom)(struct net_device ,
	206	struct ethtool_eeprom , u8 );
1da177e4 LT	207	int (get_coalesce)(struct net_device , struct ethtool_coalesce *);
1da177e4 LT	208	int (set_coalesce)(struct net_device , struct ethtool_coalesce *);
97f8aefb	209	void (get_ringparam)(struct net_device ,
	210	struct ethtool_ringparam *);
	211	int (set_ringparam)(struct net_device ,
	212	struct ethtool_ringparam *);
	213	void (get_pauseparam)(struct net_device ,
	214	struct ethtool_pauseparam*);
	215	int (set_pauseparam)(struct net_device ,
	216	struct ethtool_pauseparam*);
1da177e4 LT	217	void (self_test)(struct net_device , struct ethtool_test , u64 );
1da177e4 LT	218	void (get_strings)(struct net_device , u32 stringset, u8 *);
68f512f2	219	int (set_phys_id)(struct net_device , enum ethtool_phys_id_state);
97f8aefb	220	void (get_ethtool_stats)(struct net_device ,
97f8aefb	221	struct ethtool_stats , u64 );
1da177e4 LT	222	int (begin)(struct net_device );
1da177e4 LT	223	void (complete)(struct net_device );
97f8aefb	224	u32 (get_priv_flags)(struct net_device );
97f8aefb	225	int (set_priv_flags)(struct net_device , u32);
ff03d49f	226	int (get_sset_count)(struct net_device , int);
97f8aefb	227	int (get_rxnfc)(struct net_device ,
815c7db5	228	struct ethtool_rxnfc , u32 rule_locs);
59089d8d	229	int (set_rxnfc)(struct net_device , struct ethtool_rxnfc *);
97f8aefb	230	int (flash_device)(struct net_device , struct ethtool_flash *);
d73d3a8c	231	int (reset)(struct net_device , u32 *);
7850f63f BH	232	u32 (get_rxfh_indir_size)(struct net_device );
	233	int (get_rxfh_indir)(struct net_device , u32 *);
	234	int (set_rxfh_indir)(struct net_device , const u32 *);
8b5933c3	235	void (get_channels)(struct net_device , struct ethtool_channels *);
8b5933c3	236	int (set_channels)(struct net_device , struct ethtool_channels *);
29dd54b7 AC	237	int (get_dump_flag)(struct net_device , struct ethtool_dump *);
	238	int (get_dump_data)(struct net_device ,
	239	struct ethtool_dump , void );
	240	int (set_dump)(struct net_device , struct ethtool_dump *);
c8f3a8c3	241	int (get_ts_info)(struct net_device , struct ethtool_ts_info *);
41c3cb6d SH	242	int (get_module_info)(struct net_device ,
	243	struct ethtool_modinfo *);
	244	int (get_module_eeprom)(struct net_device ,
	245	struct ethtool_eeprom , u8 );
80f12ecc YM	246	int (get_eee)(struct net_device , struct ethtool_eee *);
80f12ecc YM	247	int (set_eee)(struct net_device , struct ethtool_eee *);
41c3cb6d	248
8b5933c3	249
1da177e4	250	};
1da177e4	251	#endif /* _LINUX_ETHTOOL_H */