[GitHub/mt8127/android_kernel_alcatel_ttab.git] / drivers / video / fm2fb.c

/*
 *  linux/drivers/video/fm2fb.c -- BSC FrameMaster II/Rainbow II frame buffer
 *				   device
 *
 *	Copyright (C) 1998 Steffen A. Mork (linux-dev@morknet.de)
 *	Copyright (C) 1999 Geert Uytterhoeven
 *
 *  Written for 2.0.x by Steffen A. Mork
 *  Ported to 2.1.x by Geert Uytterhoeven
 *  Ported to new api by James Simmons
 *
 *  This file is subject to the terms and conditions of the GNU General Public
 *  License. See the file COPYING in the main directory of this archive for
 *  more details.
 */

#include <linux/module.h>
#include <linux/mm.h>
#include <linux/fb.h>
#include <linux/init.h>
#include <linux/zorro.h>
#include <asm/io.h>

/*
 *	Some technical notes:
 *
 *	The BSC FrameMaster II (or Rainbow II) is a simple very dumb
 *	frame buffer which allows to display 24 bit true color images.
 *	Each pixel is 32 bit width so it's very easy to maintain the
 *	frame buffer. One long word has the following layout:
 *	AARRGGBB which means: AA the alpha channel byte, RR the red
 *	channel, GG the green channel and BB the blue channel.
 *
 *	The FrameMaster II supports the following video modes.
 *	- PAL/NTSC
 *	- interlaced/non interlaced
 *	- composite sync/sync/sync over green
 *
 *	The resolution is to the following both ones:
 *	- 768x576 (PAL)
 *	- 768x480 (NTSC)
 *
 *	This means that pixel access per line is fixed due to the
 *	fixed line width. In case of maximal resolution the frame
 *	buffer needs an amount of memory of 1.769.472 bytes which
 *	is near to 2 MByte (the allocated address space of Zorro2).
 *	The memory is channel interleaved. That means every channel
 *	owns four VRAMs. Unfortunately most FrameMasters II are
 *	not assembled with memory for the alpha channel. In this
 *	case it could be possible to add the frame buffer into the
 *	normal memory pool.
 *
 *	At relative address 0x1ffff8 of the frame buffers base address
 *	there exists a control register with the number of
 *	four control bits. They have the following meaning:
 *	bit value meaning
 *
 *	 0    1   0=interlaced/1=non interlaced
 *	 1    2   0=video out disabled/1=video out enabled
 *	 2    4   0=normal mode as jumpered via JP8/1=complement mode
 *	 3    8   0=read  onboard ROM/1 normal operation (required)
 *
 *	As mentioned above there are several jumper. I think there
 *	is not very much information about the FrameMaster II in
 *	the world so I add these information for completeness.
 *
 *	JP1  interlace selection (1-2 non interlaced/2-3 interlaced)
 *	JP2  wait state creation (leave as is!)
 *	JP3  wait state creation (leave as is!)
 *	JP4  modulate composite sync on green output (1-2 composite
 *	     sync on green channel/2-3 normal composite sync)
 *	JP5  create test signal, shorting this jumper will create
 *	     a white screen
 *	JP6  sync creation (1-2 composite sync/2-3 H-sync output)
 *	JP8  video mode (1-2 PAL/2-3 NTSC)
 *
 *	With the following jumpering table you can connect the
 *	FrameMaster II to a normal TV via SCART connector:
 *	JP1:  2-3
 *	JP4:  2-3
 *	JP6:  2-3
 *	JP8:  1-2 (means PAL for Europe)
 *
 *	NOTE:
 *	There is no other possibility to change the video timings
 *	except the interlaced/non interlaced, sync control and the
 *	video mode PAL (50 Hz)/NTSC (60 Hz). Inside this
 *	FrameMaster II driver are assumed values to avoid anomalies
 *	to a future X server. Except the pixel clock is really
 *	constant at 30 MHz.
 *
 *	9 pin female video connector:
 *
 *	1  analog red 0.7 Vss
 *	2  analog green 0.7 Vss
 *	3  analog blue 0.7 Vss
 *	4  H-sync TTL
 *	5  V-sync TTL
 *	6  ground
 *	7  ground
 *	8  ground
 *	9  ground
 *
 *	Some performance notes:
 *	The FrameMaster II was not designed to display a console
 *	this driver would do! It was designed to display still true
 *	color images. Imagine: When scroll up a text line there
 *	must copied ca. 1.7 MBytes to another place inside this
 *	frame buffer. This means 1.7 MByte read and 1.7 MByte write
 *	over the slow 16 bit wide Zorro2 bus! A scroll of one
 *	line needs 1 second so do not expect to much from this
 *	driver - he is at the limit!
 *
 */

/*
 *	definitions
 */

#define FRAMEMASTER_SIZE	0x200000
#define FRAMEMASTER_REG		0x1ffff8

#define FRAMEMASTER_NOLACE	1
#define FRAMEMASTER_ENABLE	2
#define FRAMEMASTER_COMPL	4
#define FRAMEMASTER_ROM		8

static volatile unsigned char *fm2fb_reg;

static struct fb_fix_screeninfo fb_fix __devinitdata = {
	.smem_len =	FRAMEMASTER_REG,
	.type =		FB_TYPE_PACKED_PIXELS,
	.visual =	FB_VISUAL_TRUECOLOR,
	.line_length =	(768 << 2),
	.mmio_len =	(8),
	.accel =	FB_ACCEL_NONE,
};

static int fm2fb_mode __devinitdata = -1;

#define FM2FB_MODE_PAL	0
#define FM2FB_MODE_NTSC	1

static struct fb_var_screeninfo fb_var_modes[] __devinitdata = {
    {
	/* 768 x 576, 32 bpp (PAL) */
	768, 576, 768, 576, 0, 0, 32, 0,
	{ 16, 8, 0 }, { 8, 8, 0 }, { 0, 8, 0 }, { 24, 8, 0 },
	0, FB_ACTIVATE_NOW, -1, -1, FB_ACCEL_NONE,
	33333, 10, 102, 10, 5, 80, 34, FB_SYNC_COMP_HIGH_ACT, 0
    }, {
	/* 768 x 480, 32 bpp (NTSC - not supported yet */
	768, 480, 768, 480, 0, 0, 32, 0,
	{ 16, 8, 0 }, { 8, 8, 0 }, { 0, 8, 0 }, { 24, 8, 0 },
	0, FB_ACTIVATE_NOW, -1, -1, FB_ACCEL_NONE,
	33333, 10, 102, 10, 5, 80, 34, FB_SYNC_COMP_HIGH_ACT, 0
    }
};

    /*
     *  Interface used by the world
     */

static int fm2fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
                           u_int transp, struct fb_info *info);
static int fm2fb_blank(int blank, struct fb_info *info);

static struct fb_ops fm2fb_ops = {
	.owner		= THIS_MODULE,
	.fb_setcolreg	= fm2fb_setcolreg,
	.fb_blank	= fm2fb_blank,
	.fb_fillrect	= cfb_fillrect,
	.fb_copyarea	= cfb_copyarea,
	.fb_imageblit	= cfb_imageblit,
};

    /*
     *  Blank the display.
     */
static int fm2fb_blank(int blank, struct fb_info *info)
{
	unsigned char t = FRAMEMASTER_ROM;

	if (!blank)
		t |= FRAMEMASTER_ENABLE | FRAMEMASTER_NOLACE;
	fm2fb_reg[0] = t;
	return 0;
}

    /*
     *  Set a single color register. The values supplied are already
     *  rounded down to the hardware's capabilities (according to the
     *  entries in the var structure). Return != 0 for invalid regno.
     */
static int fm2fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
                         u_int transp, struct fb_info *info)
{
	if (regno < 16) {
		red >>= 8;
		green >>= 8;
		blue >>= 8;

		((u32*)(info->pseudo_palette))[regno] = (red << 16) |
			(green << 8) | blue;
	}

	return 0;
}

    /*
     *  Initialisation
     */

static int __devinit fm2fb_probe(struct zorro_dev *z,
				 const struct zorro_device_id *id);

static struct zorro_device_id fm2fb_devices[] __devinitdata = {
	{ ZORRO_PROD_BSC_FRAMEMASTER_II },
	{ ZORRO_PROD_HELFRICH_RAINBOW_II },
	{ 0 }
};
MODULE_DEVICE_TABLE(zorro, fm2fb_devices);

static struct zorro_driver fm2fb_driver = {
	.name		= "fm2fb",
	.id_table	= fm2fb_devices,
	.probe		= fm2fb_probe,
};

static int __devinit fm2fb_probe(struct zorro_dev *z,
				 const struct zorro_device_id *id)
{
	struct fb_info *info;
	unsigned long *ptr;
	int is_fm;
	int x, y;

	is_fm = z->id == ZORRO_PROD_BSC_FRAMEMASTER_II;

	if (!zorro_request_device(z,"fm2fb"))
		return -ENXIO;

	info = framebuffer_alloc(16 * sizeof(u32), &z->dev);
	if (!info) {
		zorro_release_device(z);
		return -ENOMEM;
	}

	if (fb_alloc_cmap(&info->cmap, 256, 0) < 0) {
		framebuffer_release(info);
		zorro_release_device(z);
		return -ENOMEM;
	}

	/* assigning memory to kernel space */
	fb_fix.smem_start = zorro_resource_start(z);
	info->screen_base = ioremap(fb_fix.smem_start, FRAMEMASTER_SIZE);
	fb_fix.mmio_start = fb_fix.smem_start + FRAMEMASTER_REG;
	fm2fb_reg  = (unsigned char *)(info->screen_base+FRAMEMASTER_REG);

	strcpy(fb_fix.id, is_fm ? "FrameMaster II" : "Rainbow II");

	/* make EBU color bars on display */
	ptr = (unsigned long *)fb_fix.smem_start;
	for (y = 0; y < 576; y++) {
		for (x = 0; x < 96; x++) *ptr++ = 0xffffff;/* white */
		for (x = 0; x < 96; x++) *ptr++ = 0xffff00;/* yellow */
		for (x = 0; x < 96; x++) *ptr++ = 0x00ffff;/* cyan */
		for (x = 0; x < 96; x++) *ptr++ = 0x00ff00;/* green */
		for (x = 0; x < 96; x++) *ptr++ = 0xff00ff;/* magenta */
		for (x = 0; x < 96; x++) *ptr++ = 0xff0000;/* red */
		for (x = 0; x < 96; x++) *ptr++ = 0x0000ff;/* blue */
		for (x = 0; x < 96; x++) *ptr++ = 0x000000;/* black */
	}
	fm2fb_blank(0, info);

	if (fm2fb_mode == -1)
		fm2fb_mode = FM2FB_MODE_PAL;

	info->fbops = &fm2fb_ops;
	info->var = fb_var_modes[fm2fb_mode];
	info->pseudo_palette = info->par;
	info->par = NULL;
	info->fix = fb_fix;
	info->flags = FBINFO_DEFAULT;

	if (register_framebuffer(info) < 0) {
		fb_dealloc_cmap(&info->cmap);
		iounmap(info->screen_base);
		framebuffer_release(info);
		zorro_release_device(z);
		return -EINVAL;
	}
	printk("fb%d: %s frame buffer device\n", info->node, fb_fix.id);
	return 0;
}

int __init fm2fb_setup(char *options)
{
	char *this_opt;

	if (!options || !*options)
		return 0;

	while ((this_opt = strsep(&options, ",")) != NULL) {
		if (!strncmp(this_opt, "pal", 3))
			fm2fb_mode = FM2FB_MODE_PAL;
		else if (!strncmp(this_opt, "ntsc", 4))
			fm2fb_mode = FM2FB_MODE_NTSC;
	}
	return 0;
}

int __init fm2fb_init(void)
{
	char *option = NULL;

	if (fb_get_options("fm2fb", &option))
		return -ENODEV;
	fm2fb_setup(option);
	return zorro_register_driver(&fm2fb_driver);
}

module_init(fm2fb_init);
MODULE_LICENSE("GPL");
Commit	Line	Data
1da177e4 LT	1	/*
	2	* linux/drivers/video/fm2fb.c -- BSC FrameMaster II/Rainbow II frame buffer
	3	* device
	4	*
	5	* Copyright (C) 1998 Steffen A. Mork (linux-dev@morknet.de)
	6	* Copyright (C) 1999 Geert Uytterhoeven
	7	*
	8	* Written for 2.0.x by Steffen A. Mork
	9	* Ported to 2.1.x by Geert Uytterhoeven
	10	* Ported to new api by James Simmons
	11	*
	12	* This file is subject to the terms and conditions of the GNU General Public
	13	* License. See the file COPYING in the main directory of this archive for
	14	* more details.
	15	*/
	16
	17	#include <linux/module.h>
	18	#include <linux/mm.h>
	19	#include <linux/fb.h>
	20	#include <linux/init.h>
	21	#include <linux/zorro.h>
	22	#include <asm/io.h>
	23
	24	/*
	25	* Some technical notes:
	26	*
	27	* The BSC FrameMaster II (or Rainbow II) is a simple very dumb
	28	* frame buffer which allows to display 24 bit true color images.
	29	* Each pixel is 32 bit width so it's very easy to maintain the
	30	* frame buffer. One long word has the following layout:
	31	* AARRGGBB which means: AA the alpha channel byte, RR the red
	32	* channel, GG the green channel and BB the blue channel.
	33	*
	34	* The FrameMaster II supports the following video modes.
	35	* - PAL/NTSC
	36	* - interlaced/non interlaced
	37	* - composite sync/sync/sync over green
	38	*
	39	* The resolution is to the following both ones:
	40	* - 768x576 (PAL)
	41	* - 768x480 (NTSC)
	42	*
	43	* This means that pixel access per line is fixed due to the
	44	* fixed line width. In case of maximal resolution the frame
	45	* buffer needs an amount of memory of 1.769.472 bytes which
	46	* is near to 2 MByte (the allocated address space of Zorro2).
	47	* The memory is channel interleaved. That means every channel
25985edc	48	* owns four VRAMs. Unfortunately most FrameMasters II are
1da177e4 LT	49	* not assembled with memory for the alpha channel. In this
	50	* case it could be possible to add the frame buffer into the
	51	* normal memory pool.
	52	*
	53	* At relative address 0x1ffff8 of the frame buffers base address
	54	* there exists a control register with the number of
	55	* four control bits. They have the following meaning:
	56	* bit value meaning
	57	*
	58	* 0 1 0=interlaced/1=non interlaced
	59	* 1 2 0=video out disabled/1=video out enabled
	60	* 2 4 0=normal mode as jumpered via JP8/1=complement mode
	61	* 3 8 0=read onboard ROM/1 normal operation (required)
	62	*
	63	* As mentioned above there are several jumper. I think there
	64	* is not very much information about the FrameMaster II in
	65	* the world so I add these information for completeness.
	66	*
	67	* JP1 interlace selection (1-2 non interlaced/2-3 interlaced)
	68	* JP2 wait state creation (leave as is!)
	69	* JP3 wait state creation (leave as is!)
	70	* JP4 modulate composite sync on green output (1-2 composite
	71	* sync on green channel/2-3 normal composite sync)
	72	* JP5 create test signal, shorting this jumper will create
	73	* a white screen
	74	* JP6 sync creation (1-2 composite sync/2-3 H-sync output)
	75	* JP8 video mode (1-2 PAL/2-3 NTSC)
	76	*
	77	* With the following jumpering table you can connect the
	78	* FrameMaster II to a normal TV via SCART connector:
	79	* JP1: 2-3
	80	* JP4: 2-3
	81	* JP6: 2-3
	82	* JP8: 1-2 (means PAL for Europe)
	83	*
	84	* NOTE:
	85	* There is no other possibility to change the video timings
	86	* except the interlaced/non interlaced, sync control and the
	87	* video mode PAL (50 Hz)/NTSC (60 Hz). Inside this
	88	* FrameMaster II driver are assumed values to avoid anomalies
	89	* to a future X server. Except the pixel clock is really
	90	* constant at 30 MHz.
	91	*
	92	* 9 pin female video connector:
	93	*
	94	* 1 analog red 0.7 Vss
	95	* 2 analog green 0.7 Vss
	96	* 3 analog blue 0.7 Vss
	97	* 4 H-sync TTL
	98	* 5 V-sync TTL
	99	* 6 ground
	100	* 7 ground
	101	* 8 ground
	102	* 9 ground
	103	*
	104	* Some performance notes:
	105	* The FrameMaster II was not designed to display a console
	106	* this driver would do! It was designed to display still true
	107	* color images. Imagine: When scroll up a text line there
	108	* must copied ca. 1.7 MBytes to another place inside this
	109	* frame buffer. This means 1.7 MByte read and 1.7 MByte write
	110	* over the slow 16 bit wide Zorro2 bus! A scroll of one
	111	* line needs 1 second so do not expect to much from this
	112	* driver - he is at the limit!
113	*
114	*/
115
116	/*
117	* definitions
118	*/
119
120	#define FRAMEMASTER_SIZE 0x200000
121	#define FRAMEMASTER_REG 0x1ffff8
122
123	#define FRAMEMASTER_NOLACE 1
124	#define FRAMEMASTER_ENABLE 2
125	#define FRAMEMASTER_COMPL 4
126	#define FRAMEMASTER_ROM 8
127
128	static volatile unsigned char *fm2fb_reg;
129
130	static struct fb_fix_screeninfo fb_fix __devinitdata = {
131	.smem_len = FRAMEMASTER_REG,
132	.type = FB_TYPE_PACKED_PIXELS,
133	.visual = FB_VISUAL_TRUECOLOR,
134	.line_length = (768 << 2),
135	.mmio_len = (8),
136	.accel = FB_ACCEL_NONE,
137	};
138
139	static int fm2fb_mode __devinitdata = -1;
140
141	#define FM2FB_MODE_PAL 0
142	#define FM2FB_MODE_NTSC 1
143
144	static struct fb_var_screeninfo fb_var_modes[] __devinitdata = {
145	{
146	/* 768 x 576, 32 bpp (PAL) */
147	768, 576, 768, 576, 0, 0, 32, 0,
148	{ 16, 8, 0 }, { 8, 8, 0 }, { 0, 8, 0 }, { 24, 8, 0 },
149	0, FB_ACTIVATE_NOW, -1, -1, FB_ACCEL_NONE,
150	33333, 10, 102, 10, 5, 80, 34, FB_SYNC_COMP_HIGH_ACT, 0
151	}, {
152	/* 768 x 480, 32 bpp (NTSC - not supported yet */
153	768, 480, 768, 480, 0, 0, 32, 0,
154	{ 16, 8, 0 }, { 8, 8, 0 }, { 0, 8, 0 }, { 24, 8, 0 },
155	0, FB_ACTIVATE_NOW, -1, -1, FB_ACCEL_NONE,
156	33333, 10, 102, 10, 5, 80, 34, FB_SYNC_COMP_HIGH_ACT, 0
157	}
158	};
159
160	/*
161	* Interface used by the world
162	*/
163
164	static int fm2fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
165	u_int transp, struct fb_info *info);
166	static int fm2fb_blank(int blank, struct fb_info *info);
167
168	static struct fb_ops fm2fb_ops = {
169	.owner = THIS_MODULE,
170	.fb_setcolreg = fm2fb_setcolreg,
171	.fb_blank = fm2fb_blank,
172	.fb_fillrect = cfb_fillrect,
173	.fb_copyarea = cfb_copyarea,
174	.fb_imageblit = cfb_imageblit,
1da177e4 LT	175	};
	176
	177	/*
	178	* Blank the display.
	179	*/
	180	static int fm2fb_blank(int blank, struct fb_info *info)
	181	{
	182	unsigned char t = FRAMEMASTER_ROM;
	183
	184	if (!blank)
	185	t \|= FRAMEMASTER_ENABLE \| FRAMEMASTER_NOLACE;
	186	fm2fb_reg[0] = t;
	187	return 0;
	188	}
	189
	190	/*
	191	* Set a single color register. The values supplied are already
	192	* rounded down to the hardware's capabilities (according to the
	193	* entries in the var structure). Return != 0 for invalid regno.
	194	*/
	195	static int fm2fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
	196	u_int transp, struct fb_info *info)
	197	{
c771eba1 AD	198	if (regno < 16) {
	199	red >>= 8;
	200	green >>= 8;
	201	blue >>= 8;
	202
	203	((u32*)(info->pseudo_palette))[regno] = (red << 16) \|
	204	(green << 8) \| blue;
	205	}
1da177e4	206
1da177e4 LT	207	return 0;
	208	}
	209
	210	/*
	211	* Initialisation
	212	*/
	213
	214	static int __devinit fm2fb_probe(struct zorro_dev *z,
	215	const struct zorro_device_id *id);
	216
	217	static struct zorro_device_id fm2fb_devices[] __devinitdata = {
	218	{ ZORRO_PROD_BSC_FRAMEMASTER_II },
	219	{ ZORRO_PROD_HELFRICH_RAINBOW_II },
	220	{ 0 }
	221	};
bf54a2b3	222	MODULE_DEVICE_TABLE(zorro, fm2fb_devices);
1da177e4 LT	223
	224	static struct zorro_driver fm2fb_driver = {
	225	.name = "fm2fb",
	226	.id_table = fm2fb_devices,
	227	.probe = fm2fb_probe,
	228	};
	229
	230	static int __devinit fm2fb_probe(struct zorro_dev *z,
	231	const struct zorro_device_id *id)
	232	{
	233	struct fb_info *info;
	234	unsigned long *ptr;
	235	int is_fm;
	236	int x, y;
	237
	238	is_fm = z->id == ZORRO_PROD_BSC_FRAMEMASTER_II;
	239
	240	if (!zorro_request_device(z,"fm2fb"))
	241	return -ENXIO;
	242
c771eba1	243	info = framebuffer_alloc(16 * sizeof(u32), &z->dev);
1da177e4 LT	244	if (!info) {
	245	zorro_release_device(z);
	246	return -ENOMEM;
	247	}
	248
	249	if (fb_alloc_cmap(&info->cmap, 256, 0) < 0) {
	250	framebuffer_release(info);
	251	zorro_release_device(z);
	252	return -ENOMEM;
	253	}
	254
	255	/* assigning memory to kernel space */
	256	fb_fix.smem_start = zorro_resource_start(z);
	257	info->screen_base = ioremap(fb_fix.smem_start, FRAMEMASTER_SIZE);
	258	fb_fix.mmio_start = fb_fix.smem_start + FRAMEMASTER_REG;
	259	fm2fb_reg = (unsigned char *)(info->screen_base+FRAMEMASTER_REG);
	260
	261	strcpy(fb_fix.id, is_fm ? "FrameMaster II" : "Rainbow II");
	262
	263	/* make EBU color bars on display */
	264	ptr = (unsigned long *)fb_fix.smem_start;
	265	for (y = 0; y < 576; y++) {
	266	for (x = 0; x < 96; x++) ptr++ = 0xffffff;/ white */
	267	for (x = 0; x < 96; x++) ptr++ = 0xffff00;/ yellow */
	268	for (x = 0; x < 96; x++) ptr++ = 0x00ffff;/ cyan */
	269	for (x = 0; x < 96; x++) ptr++ = 0x00ff00;/ green */
	270	for (x = 0; x < 96; x++) ptr++ = 0xff00ff;/ magenta */
	271	for (x = 0; x < 96; x++) ptr++ = 0xff0000;/ red */
	272	for (x = 0; x < 96; x++) ptr++ = 0x0000ff;/ blue */
	273	for (x = 0; x < 96; x++) ptr++ = 0x000000;/ black */
	274	}
	275	fm2fb_blank(0, info);
	276
	277	if (fm2fb_mode == -1)
	278	fm2fb_mode = FM2FB_MODE_PAL;
	279
	280	info->fbops = &fm2fb_ops;
	281	info->var = fb_var_modes[fm2fb_mode];
	282	info->pseudo_palette = info->par;
	283	info->par = NULL;
	284	info->fix = fb_fix;
	285	info->flags = FBINFO_DEFAULT;
	286
	287	if (register_framebuffer(info) < 0) {
	288	fb_dealloc_cmap(&info->cmap);
1b3349fa	289	iounmap(info->screen_base);
1da177e4 LT	290	framebuffer_release(info);
	291	zorro_release_device(z);
	292	return -EINVAL;
	293	}
	294	printk("fb%d: %s frame buffer device\n", info->node, fb_fix.id);
	295	return 0;
	296	}
	297
	298	int __init fm2fb_setup(char *options)
	299	{
	300	char *this_opt;
	301
	302	if (!options \|\| !*options)
	303	return 0;
	304
	305	while ((this_opt = strsep(&options, ",")) != NULL) {
	306	if (!strncmp(this_opt, "pal", 3))
	307	fm2fb_mode = FM2FB_MODE_PAL;
	308	else if (!strncmp(this_opt, "ntsc", 4))
	309	fm2fb_mode = FM2FB_MODE_NTSC;
	310	}
	311	return 0;
	312	}
	313
	314	int __init fm2fb_init(void)
	315	{
	316	char *option = NULL;
	317
	318	if (fb_get_options("fm2fb", &option))
	319	return -ENODEV;
	320	fm2fb_setup(option);
	321	return zorro_register_driver(&fm2fb_driver);
	322	}
	323
	324	module_init(fm2fb_init);
	325	MODULE_LICENSE("GPL");