[GitHub/mt8127/android_kernel_alcatel_ttab.git] / drivers / video / auo_k1900fb.c

/*
 * auok190xfb.c -- FB driver for AUO-K1900 controllers
 *
 * Copyright (C) 2011, 2012 Heiko Stuebner <heiko@sntech.de>
 *
 * based on broadsheetfb.c
 *
 * Copyright (C) 2008, Jaya Kumar
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 * Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven.
 *
 * This driver is written to be used with the AUO-K1900 display controller.
 *
 * It is intended to be architecture independent. A board specific driver
 * must be used to perform all the physical IO interactions.
 *
 * The controller supports different update modes:
 * mode0+1 16 step gray (4bit)
 * mode2 4 step gray (2bit) - FIXME: add strange refresh
 * mode3 2 step gray (1bit) - FIXME: add strange refresh
 * mode4 handwriting mode (strange behaviour)
 * mode5 automatic selection of update mode
 */

#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/fb.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/list.h>
#include <linux/firmware.h>
#include <linux/gpio.h>
#include <linux/pm_runtime.h>

#include <video/auo_k190xfb.h>

#include "auo_k190x.h"

/*
 * AUO-K1900 specific commands
 */

#define AUOK1900_CMD_PARTIALDISP	0x1001
#define AUOK1900_CMD_ROTATION		0x1006
#define AUOK1900_CMD_LUT_STOP		0x1009

#define AUOK1900_INIT_TEMP_AVERAGE	(1 << 13)
#define AUOK1900_INIT_ROTATE(_x)	((_x & 0x3) << 10)
#define AUOK1900_INIT_RESOLUTION(_res)	((_res & 0x7) << 2)

static void auok1900_init(struct auok190xfb_par *par)
{
	struct device *dev = par->info->device;
	struct auok190x_board *board = par->board;
	u16 init_param = 0;

	pm_runtime_get_sync(dev);

	init_param |= AUOK1900_INIT_TEMP_AVERAGE;
	init_param |= AUOK1900_INIT_ROTATE(par->rotation);
	init_param |= AUOK190X_INIT_INVERSE_WHITE;
	init_param |= AUOK190X_INIT_FORMAT0;
	init_param |= AUOK1900_INIT_RESOLUTION(par->resolution);
	init_param |= AUOK190X_INIT_SHIFT_RIGHT;

	auok190x_send_cmdargs(par, AUOK190X_CMD_INIT, 1, &init_param);

	/* let the controller finish */
	board->wait_for_rdy(par);

	pm_runtime_mark_last_busy(dev);
	pm_runtime_put_autosuspend(dev);
}

static void auok1900_update_region(struct auok190xfb_par *par, int mode,
						u16 y1, u16 y2)
{
	struct device *dev = par->info->device;
	unsigned char *buf = (unsigned char *)par->info->screen_base;
	int xres = par->info->var.xres;
	int line_length = par->info->fix.line_length;
	u16 args[4];

	pm_runtime_get_sync(dev);

	mutex_lock(&(par->io_lock));

	/* y1 and y2 must be a multiple of 2 so drop the lowest bit */
	y1 &= 0xfffe;
	y2 &= 0xfffe;

	dev_dbg(dev, "update (x,y,w,h,mode)=(%d,%d,%d,%d,%d)\n",
		1, y1+1, xres, y2-y1, mode);

	/* to FIX handle different partial update modes */
	args[0] = mode | 1;
	args[1] = y1 + 1;
	args[2] = xres;
	args[3] = y2 - y1;
	buf += y1 * line_length;
	auok190x_send_cmdargs_pixels(par, AUOK1900_CMD_PARTIALDISP, 4, args,
				     ((y2 - y1) * line_length)/2, (u16 *) buf);
	auok190x_send_command(par, AUOK190X_CMD_DATA_STOP);

	par->update_cnt++;

	mutex_unlock(&(par->io_lock));

	pm_runtime_mark_last_busy(dev);
	pm_runtime_put_autosuspend(dev);
}

static void auok1900fb_dpy_update_pages(struct auok190xfb_par *par,
						u16 y1, u16 y2)
{
	int mode;

	if (par->update_mode < 0) {
		mode = AUOK190X_UPDATE_MODE(1);
		par->last_mode = -1;
	} else {
		mode = AUOK190X_UPDATE_MODE(par->update_mode);
		par->last_mode = par->update_mode;
	}

	if (par->flash)
		mode |= AUOK190X_UPDATE_NONFLASH;

	auok1900_update_region(par, mode, y1, y2);
}

static void auok1900fb_dpy_update(struct auok190xfb_par *par)
{
	int mode;

	if (par->update_mode < 0) {
		mode = AUOK190X_UPDATE_MODE(0);
		par->last_mode = -1;
	} else {
		mode = AUOK190X_UPDATE_MODE(par->update_mode);
		par->last_mode = par->update_mode;
	}

	if (par->flash)
		mode |= AUOK190X_UPDATE_NONFLASH;

	auok1900_update_region(par, mode, 0, par->info->var.yres);
	par->update_cnt = 0;
}

static bool auok1900fb_need_refresh(struct auok190xfb_par *par)
{
	return (par->update_cnt > 10);
}

static int auok1900fb_probe(struct platform_device *pdev)
{
	struct auok190x_init_data init;
	struct auok190x_board *board;

	/* pick up board specific routines */
	board = pdev->dev.platform_data;
	if (!board)
		return -EINVAL;

	/* fill temporary init struct for common init */
	init.id = "auo_k1900fb";
	init.board = board;
	init.update_partial = auok1900fb_dpy_update_pages;
	init.update_all = auok1900fb_dpy_update;
	init.need_refresh = auok1900fb_need_refresh;
	init.init = auok1900_init;

	return auok190x_common_probe(pdev, &init);
}

static int auok1900fb_remove(struct platform_device *pdev)
{
	return auok190x_common_remove(pdev);
}

static struct platform_driver auok1900fb_driver = {
	.probe	= auok1900fb_probe,
	.remove = auok1900fb_remove,
	.driver	= {
		.owner	= THIS_MODULE,
		.name	= "auo_k1900fb",
		.pm = &auok190x_pm,
	},
};
module_platform_driver(auok1900fb_driver);

MODULE_DESCRIPTION("framebuffer driver for the AUO-K1900 EPD controller");
MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>");
MODULE_LICENSE("GPL");
Commit	Line	Data
96b1d500 HS	1	/*
	2	* auok190xfb.c -- FB driver for AUO-K1900 controllers
	3	*
	4	* Copyright (C) 2011, 2012 Heiko Stuebner <heiko@sntech.de>
	5	*
	6	* based on broadsheetfb.c
	7	*
	8	* Copyright (C) 2008, Jaya Kumar
	9	*
	10	* This program is free software; you can redistribute it and/or modify
	11	* it under the terms of the GNU General Public License version 2 as
	12	* published by the Free Software Foundation.
	13	*
	14	* Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven.
	15	*
	16	* This driver is written to be used with the AUO-K1900 display controller.
	17	*
	18	* It is intended to be architecture independent. A board specific driver
	19	* must be used to perform all the physical IO interactions.
	20	*
	21	* The controller supports different update modes:
	22	* mode0+1 16 step gray (4bit)
	23	* mode2 4 step gray (2bit) - FIXME: add strange refresh
	24	* mode3 2 step gray (1bit) - FIXME: add strange refresh
	25	* mode4 handwriting mode (strange behaviour)
	26	* mode5 automatic selection of update mode
	27	*/
	28
	29	#include <linux/module.h>
	30	#include <linux/kernel.h>
	31	#include <linux/errno.h>
	32	#include <linux/string.h>
	33	#include <linux/mm.h>
	34	#include <linux/slab.h>
	35	#include <linux/delay.h>
	36	#include <linux/interrupt.h>
	37	#include <linux/fb.h>
	38	#include <linux/init.h>
	39	#include <linux/platform_device.h>
	40	#include <linux/list.h>
	41	#include <linux/firmware.h>
	42	#include <linux/gpio.h>
	43	#include <linux/pm_runtime.h>
	44
	45	#include <video/auo_k190xfb.h>
	46
	47	#include "auo_k190x.h"
	48
	49	/*
	50	* AUO-K1900 specific commands
	51	*/
	52
	53	#define AUOK1900_CMD_PARTIALDISP 0x1001
	54	#define AUOK1900_CMD_ROTATION 0x1006
	55	#define AUOK1900_CMD_LUT_STOP 0x1009
	56
	57	#define AUOK1900_INIT_TEMP_AVERAGE (1 << 13)
	58	#define AUOK1900_INIT_ROTATE(_x) ((_x & 0x3) << 10)
	59	#define AUOK1900_INIT_RESOLUTION(_res) ((_res & 0x7) << 2)
	60
	61	static void auok1900_init(struct auok190xfb_par *par)
	62	{
70f1e28e	63	struct device *dev = par->info->device;
96b1d500 HS	64	struct auok190x_board *board = par->board;
	65	u16 init_param = 0;
	66
70f1e28e HS	67	pm_runtime_get_sync(dev);
70f1e28e HS	68
96b1d500 HS	69	init_param \|= AUOK1900_INIT_TEMP_AVERAGE;
	70	init_param \|= AUOK1900_INIT_ROTATE(par->rotation);
	71	init_param \|= AUOK190X_INIT_INVERSE_WHITE;
	72	init_param \|= AUOK190X_INIT_FORMAT0;
	73	init_param \|= AUOK1900_INIT_RESOLUTION(par->resolution);
	74	init_param \|= AUOK190X_INIT_SHIFT_RIGHT;
	75
	76	auok190x_send_cmdargs(par, AUOK190X_CMD_INIT, 1, &init_param);
	77
	78	/* let the controller finish */
	79	board->wait_for_rdy(par);
70f1e28e HS	80
	81	pm_runtime_mark_last_busy(dev);
	82	pm_runtime_put_autosuspend(dev);
96b1d500 HS	83	}
	84
	85	static void auok1900_update_region(struct auok190xfb_par *par, int mode,
	86	u16 y1, u16 y2)
	87	{
	88	struct device *dev = par->info->device;
	89	unsigned char buf = (unsigned char )par->info->screen_base;
	90	int xres = par->info->var.xres;
a1655100	91	int line_length = par->info->fix.line_length;
96b1d500 HS	92	u16 args[4];
	93
	94	pm_runtime_get_sync(dev);
	95
	96	mutex_lock(&(par->io_lock));
	97
	98	/* y1 and y2 must be a multiple of 2 so drop the lowest bit */
	99	y1 &= 0xfffe;
	100	y2 &= 0xfffe;
	101
	102	dev_dbg(dev, "update (x,y,w,h,mode)=(%d,%d,%d,%d,%d)\n",
	103	1, y1+1, xres, y2-y1, mode);
	104
	105	/* to FIX handle different partial update modes */
	106	args[0] = mode \| 1;
	107	args[1] = y1 + 1;
	108	args[2] = xres;
	109	args[3] = y2 - y1;
a1655100	110	buf += y1 * line_length;
96b1d500	111	auok190x_send_cmdargs_pixels(par, AUOK1900_CMD_PARTIALDISP, 4, args,
a1655100	112	((y2 - y1) * line_length)/2, (u16 *) buf);
96b1d500 HS	113	auok190x_send_command(par, AUOK190X_CMD_DATA_STOP);
	114
	115	par->update_cnt++;
	116
	117	mutex_unlock(&(par->io_lock));
	118
	119	pm_runtime_mark_last_busy(dev);
	120	pm_runtime_put_autosuspend(dev);
	121	}
	122
	123	static void auok1900fb_dpy_update_pages(struct auok190xfb_par *par,
	124	u16 y1, u16 y2)
	125	{
	126	int mode;
	127
	128	if (par->update_mode < 0) {
	129	mode = AUOK190X_UPDATE_MODE(1);
	130	par->last_mode = -1;
	131	} else {
	132	mode = AUOK190X_UPDATE_MODE(par->update_mode);
	133	par->last_mode = par->update_mode;
	134	}
	135
	136	if (par->flash)
	137	mode \|= AUOK190X_UPDATE_NONFLASH;
	138
	139	auok1900_update_region(par, mode, y1, y2);
	140	}
	141
	142	static void auok1900fb_dpy_update(struct auok190xfb_par *par)
	143	{
	144	int mode;
	145
	146	if (par->update_mode < 0) {
	147	mode = AUOK190X_UPDATE_MODE(0);
	148	par->last_mode = -1;
	149	} else {
	150	mode = AUOK190X_UPDATE_MODE(par->update_mode);
	151	par->last_mode = par->update_mode;
	152	}
	153
	154	if (par->flash)
	155	mode \|= AUOK190X_UPDATE_NONFLASH;
	156
	157	auok1900_update_region(par, mode, 0, par->info->var.yres);
	158	par->update_cnt = 0;
	159	}
	160
	161	static bool auok1900fb_need_refresh(struct auok190xfb_par *par)
	162	{
	163	return (par->update_cnt > 10);
	164	}
	165
48c68c4f	166	static int auok1900fb_probe(struct platform_device *pdev)
96b1d500 HS	167	{
	168	struct auok190x_init_data init;
	169	struct auok190x_board *board;
	170
	171	/* pick up board specific routines */
	172	board = pdev->dev.platform_data;
	173	if (!board)
	174	return -EINVAL;
	175
	176	/* fill temporary init struct for common init */
	177	init.id = "auo_k1900fb";
	178	init.board = board;
	179	init.update_partial = auok1900fb_dpy_update_pages;
	180	init.update_all = auok1900fb_dpy_update;
	181	init.need_refresh = auok1900fb_need_refresh;
	182	init.init = auok1900_init;
	183
	184	return auok190x_common_probe(pdev, &init);
	185	}
	186
48c68c4f	187	static int auok1900fb_remove(struct platform_device *pdev)
96b1d500 HS	188	{
	189	return auok190x_common_remove(pdev);
	190	}
	191
	192	static struct platform_driver auok1900fb_driver = {
	193	.probe = auok1900fb_probe,
48c68c4f	194	.remove = auok1900fb_remove,
96b1d500 HS	195	.driver = {
	196	.owner = THIS_MODULE,
	197	.name = "auo_k1900fb",
	198	.pm = &auok190x_pm,
	199	},
	200	};
	201	module_platform_driver(auok1900fb_driver);
	202
	203	MODULE_DESCRIPTION("framebuffer driver for the AUO-K1900 EPD controller");
	204	MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>");
	205	MODULE_LICENSE("GPL");