[GitHub/mt8127/android_kernel_alcatel_ttab.git] / drivers / usb / host / xhci-pci.c

/*
 * xHCI host controller driver PCI Bus Glue.
 *
 * Copyright (C) 2008 Intel Corp.
 *
 * Author: Sarah Sharp
 * Some code borrowed from the Linux EHCI driver.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
 * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
 * for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software Foundation,
 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */

#include <linux/pci.h>
#include <linux/slab.h>

#include "xhci.h"

/* Device for a quirk */
#define PCI_VENDOR_ID_FRESCO_LOGIC	0x1b73
#define PCI_DEVICE_ID_FRESCO_LOGIC_PDK	0x1000

static const char hcd_name[] = "xhci_hcd";

/* called after powerup, by probe or system-pm "wakeup" */
static int xhci_pci_reinit(struct xhci_hcd *xhci, struct pci_dev *pdev)
{
	/*
	 * TODO: Implement finding debug ports later.
	 * TODO: see if there are any quirks that need to be added to handle
	 * new extended capabilities.
	 */

	/* PCI Memory-Write-Invalidate cycle support is optional (uncommon) */
	if (!pci_set_mwi(pdev))
		xhci_dbg(xhci, "MWI active\n");

	xhci_dbg(xhci, "Finished xhci_pci_reinit\n");
	return 0;
}

/* called during probe() after chip reset completes */
static int xhci_pci_setup(struct usb_hcd *hcd)
{
	struct xhci_hcd		*xhci;
	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);
	int			retval;
	u32			temp;

	hcd->self.sg_tablesize = TRBS_PER_SEGMENT - 2;

	if (usb_hcd_is_primary_hcd(hcd)) {
		xhci = kzalloc(sizeof(struct xhci_hcd), GFP_KERNEL);
		if (!xhci)
			return -ENOMEM;
		*((struct xhci_hcd **) hcd->hcd_priv) = xhci;
		xhci->main_hcd = hcd;
		/* Mark the first roothub as being USB 2.0.
		 * The xHCI driver will register the USB 3.0 roothub.
		 */
		hcd->speed = HCD_USB2;
		hcd->self.root_hub->speed = USB_SPEED_HIGH;
		/*
		 * USB 2.0 roothub under xHCI has an integrated TT,
		 * (rate matching hub) as opposed to having an OHCI/UHCI
		 * companion controller.
		 */
		hcd->has_tt = 1;
	} else {
		/* xHCI private pointer was set in xhci_pci_probe for the second
		 * registered roothub.
		 */
		xhci = hcd_to_xhci(hcd);
		temp = xhci_readl(xhci, &xhci->cap_regs->hcc_params);
		if (HCC_64BIT_ADDR(temp)) {
			xhci_dbg(xhci, "Enabling 64-bit DMA addresses.\n");
			dma_set_mask(hcd->self.controller, DMA_BIT_MASK(64));
		} else {
			dma_set_mask(hcd->self.controller, DMA_BIT_MASK(32));
		}
		return 0;
	}

	xhci->cap_regs = hcd->regs;
	xhci->op_regs = hcd->regs +
		HC_LENGTH(xhci_readl(xhci, &xhci->cap_regs->hc_capbase));
	xhci->run_regs = hcd->regs +
		(xhci_readl(xhci, &xhci->cap_regs->run_regs_off) & RTSOFF_MASK);
	/* Cache read-only capability registers */
	xhci->hcs_params1 = xhci_readl(xhci, &xhci->cap_regs->hcs_params1);
	xhci->hcs_params2 = xhci_readl(xhci, &xhci->cap_regs->hcs_params2);
	xhci->hcs_params3 = xhci_readl(xhci, &xhci->cap_regs->hcs_params3);
	xhci->hcc_params = xhci_readl(xhci, &xhci->cap_regs->hc_capbase);
	xhci->hci_version = HC_VERSION(xhci->hcc_params);
	xhci->hcc_params = xhci_readl(xhci, &xhci->cap_regs->hcc_params);
	xhci_print_registers(xhci);

	/* Look for vendor-specific quirks */
	if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
			pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK &&
			pdev->revision == 0x0) {
			xhci->quirks |= XHCI_RESET_EP_QUIRK;
			xhci_dbg(xhci, "QUIRK: Fresco Logic xHC needs configure"
					" endpoint cmd after reset endpoint\n");
	}
	if (pdev->vendor == PCI_VENDOR_ID_NEC)
		xhci->quirks |= XHCI_NEC_HOST;

	/* AMD PLL quirk */
	if (pdev->vendor == PCI_VENDOR_ID_AMD && usb_amd_find_chipset_info())
		xhci->quirks |= XHCI_AMD_PLL_FIX;
	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
			pdev->device == PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI) {
		xhci->quirks |= XHCI_SPURIOUS_SUCCESS;
	}

	/* Make sure the HC is halted. */
	retval = xhci_halt(xhci);
	if (retval)
		goto error;

	xhci_dbg(xhci, "Resetting HCD\n");
	/* Reset the internal HC memory state and registers. */
	retval = xhci_reset(xhci);
	if (retval)
		goto error;
	xhci_dbg(xhci, "Reset complete\n");

	temp = xhci_readl(xhci, &xhci->cap_regs->hcc_params);
	if (HCC_64BIT_ADDR(temp)) {
		xhci_dbg(xhci, "Enabling 64-bit DMA addresses.\n");
		dma_set_mask(hcd->self.controller, DMA_BIT_MASK(64));
	} else {
		dma_set_mask(hcd->self.controller, DMA_BIT_MASK(32));
	}

	xhci_dbg(xhci, "Calling HCD init\n");
	/* Initialize HCD and host controller data structures. */
	retval = xhci_init(hcd);
	if (retval)
		goto error;
	xhci_dbg(xhci, "Called HCD init\n");

	pci_read_config_byte(pdev, XHCI_SBRN_OFFSET, &xhci->sbrn);
	xhci_dbg(xhci, "Got SBRN %u\n", (unsigned int) xhci->sbrn);

	/* Find any debug ports */
	retval = xhci_pci_reinit(xhci, pdev);
	if (!retval)
		return retval;

error:
	kfree(xhci);
	return retval;
}

/*
 * We need to register our own PCI probe function (instead of the USB core's
 * function) in order to create a second roothub under xHCI.
 */
static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
	int retval;
	struct xhci_hcd *xhci;
	struct hc_driver *driver;
	struct usb_hcd *hcd;

	driver = (struct hc_driver *)id->driver_data;
	/* Register the USB 2.0 roothub.
	 * FIXME: USB core must know to register the USB 2.0 roothub first.
	 * This is sort of silly, because we could just set the HCD driver flags
	 * to say USB 2.0, but I'm not sure what the implications would be in
	 * the other parts of the HCD code.
	 */
	retval = usb_hcd_pci_probe(dev, id);

	if (retval)
		return retval;

	/* USB 2.0 roothub is stored in the PCI device now. */
	hcd = dev_get_drvdata(&dev->dev);
	xhci = hcd_to_xhci(hcd);
	xhci->shared_hcd = usb_create_shared_hcd(driver, &dev->dev,
				pci_name(dev), hcd);
	if (!xhci->shared_hcd) {
		retval = -ENOMEM;
		goto dealloc_usb2_hcd;
	}

	/* Set the xHCI pointer before xhci_pci_setup() (aka hcd_driver.reset)
	 * is called by usb_add_hcd().
	 */
	*((struct xhci_hcd **) xhci->shared_hcd->hcd_priv) = xhci;

	retval = usb_add_hcd(xhci->shared_hcd, dev->irq,
			IRQF_DISABLED | IRQF_SHARED);
	if (retval)
		goto put_usb3_hcd;
	/* Roothub already marked as USB 3.0 speed */
	return 0;

put_usb3_hcd:
	usb_put_hcd(xhci->shared_hcd);
dealloc_usb2_hcd:
	usb_hcd_pci_remove(dev);
	return retval;
}

static void xhci_pci_remove(struct pci_dev *dev)
{
	struct xhci_hcd *xhci;

	xhci = hcd_to_xhci(pci_get_drvdata(dev));
	if (xhci->shared_hcd) {
		usb_remove_hcd(xhci->shared_hcd);
		usb_put_hcd(xhci->shared_hcd);
	}
	usb_hcd_pci_remove(dev);
	kfree(xhci);
}

#ifdef CONFIG_PM
static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
{
	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
	int	retval = 0;

	if (hcd->state != HC_STATE_SUSPENDED ||
			xhci->shared_hcd->state != HC_STATE_SUSPENDED)
		return -EINVAL;

	retval = xhci_suspend(xhci);

	return retval;
}

static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
{
	struct xhci_hcd		*xhci = hcd_to_xhci(hcd);
	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);
	int			retval = 0;

	/* The BIOS on systems with the Intel Panther Point chipset may or may
	 * not support xHCI natively.  That means that during system resume, it
	 * may switch the ports back to EHCI so that users can use their
	 * keyboard to select a kernel from GRUB after resume from hibernate.
	 *
	 * The BIOS is supposed to remember whether the OS had xHCI ports
	 * enabled before resume, and switch the ports back to xHCI when the
	 * BIOS/OS semaphore is written, but we all know we can't trust BIOS
	 * writers.
	 *
	 * Unconditionally switch the ports back to xHCI after a system resume.
	 * We can't tell whether the EHCI or xHCI controller will be resumed
	 * first, so we have to do the port switchover in both drivers.  Writing
	 * a '1' to the port switchover registers should have no effect if the
	 * port was already switched over.
	 */
	if (usb_is_intel_switchable_xhci(pdev))
		usb_enable_xhci_ports(pdev);

	retval = xhci_resume(xhci, hibernated);
	return retval;
}
#endif /* CONFIG_PM */

static const struct hc_driver xhci_pci_hc_driver = {
	.description =		hcd_name,
	.product_desc =		"xHCI Host Controller",
	.hcd_priv_size =	sizeof(struct xhci_hcd *),

	/*
	 * generic hardware linkage
	 */
	.irq =			xhci_irq,
	.flags =		HCD_MEMORY | HCD_USB3 | HCD_SHARED,

	/*
	 * basic lifecycle operations
	 */
	.reset =		xhci_pci_setup,
	.start =		xhci_run,
#ifdef CONFIG_PM
	.pci_suspend =          xhci_pci_suspend,
	.pci_resume =           xhci_pci_resume,
#endif
	.stop =			xhci_stop,
	.shutdown =		xhci_shutdown,

	/*
	 * managing i/o requests and associated device resources
	 */
	.urb_enqueue =		xhci_urb_enqueue,
	.urb_dequeue =		xhci_urb_dequeue,
	.alloc_dev =		xhci_alloc_dev,
	.free_dev =		xhci_free_dev,
	.alloc_streams =	xhci_alloc_streams,
	.free_streams =		xhci_free_streams,
	.add_endpoint =		xhci_add_endpoint,
	.drop_endpoint =	xhci_drop_endpoint,
	.endpoint_reset =	xhci_endpoint_reset,
	.check_bandwidth =	xhci_check_bandwidth,
	.reset_bandwidth =	xhci_reset_bandwidth,
	.address_device =	xhci_address_device,
	.update_hub_device =	xhci_update_hub_device,
	.reset_device =		xhci_discover_or_reset_device,

	/*
	 * scheduling support
	 */
	.get_frame_number =	xhci_get_frame,

	/* Root hub support */
	.hub_control =		xhci_hub_control,
	.hub_status_data =	xhci_hub_status_data,
	.bus_suspend =		xhci_bus_suspend,
	.bus_resume =		xhci_bus_resume,
};

/*-------------------------------------------------------------------------*/

/* PCI driver selection metadata; PCI hotplugging uses this */
static const struct pci_device_id pci_ids[] = { {
	/* handle any USB 3.0 xHCI controller */
	PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_XHCI, ~0),
	.driver_data =	(unsigned long) &xhci_pci_hc_driver,
	},
	{ /* end: all zeroes */ }
};
MODULE_DEVICE_TABLE(pci, pci_ids);

/* pci driver glue; this is a "new style" PCI driver module */
static struct pci_driver xhci_pci_driver = {
	.name =		(char *) hcd_name,
	.id_table =	pci_ids,

	.probe =	xhci_pci_probe,
	.remove =	xhci_pci_remove,
	/* suspend and resume implemented later */

	.shutdown = 	usb_hcd_pci_shutdown,
#ifdef CONFIG_PM_SLEEP
	.driver = {
		.pm = &usb_hcd_pci_pm_ops
	},
#endif
};

int xhci_register_pci(void)
{
	return pci_register_driver(&xhci_pci_driver);
}

void xhci_unregister_pci(void)
{
	pci_unregister_driver(&xhci_pci_driver);
}
Commit	Line	Data
66d4eadd SS	1	/*
	2	* xHCI host controller driver PCI Bus Glue.
	3	*
	4	* Copyright (C) 2008 Intel Corp.
	5	*
	6	* Author: Sarah Sharp
	7	* Some code borrowed from the Linux EHCI driver.
	8	*
	9	* This program is free software; you can redistribute it and/or modify
	10	* it under the terms of the GNU General Public License version 2 as
	11	* published by the Free Software Foundation.
	12	*
	13	* This program is distributed in the hope that it will be useful, but
	14	* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
	15	* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
	16	* for more details.
	17	*
	18	* You should have received a copy of the GNU General Public License
	19	* along with this program; if not, write to the Free Software Foundation,
	20	* Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
	21	*/
	22
	23	#include <linux/pci.h>
7fc2a616	24	#include <linux/slab.h>
66d4eadd SS	25
	26	#include "xhci.h"
	27
ac9d8fe7 SS	28	/* Device for a quirk */
	29	#define PCI_VENDOR_ID_FRESCO_LOGIC 0x1b73
	30	#define PCI_DEVICE_ID_FRESCO_LOGIC_PDK 0x1000
	31
66d4eadd SS	32	static const char hcd_name[] = "xhci_hcd";
	33
	34	/* called after powerup, by probe or system-pm "wakeup" */
	35	static int xhci_pci_reinit(struct xhci_hcd xhci, struct pci_dev pdev)
	36	{
	37	/*
	38	* TODO: Implement finding debug ports later.
	39	* TODO: see if there are any quirks that need to be added to handle
	40	* new extended capabilities.
	41	*/
	42
	43	/* PCI Memory-Write-Invalidate cycle support is optional (uncommon) */
	44	if (!pci_set_mwi(pdev))
	45	xhci_dbg(xhci, "MWI active\n");
	46
	47	xhci_dbg(xhci, "Finished xhci_pci_reinit\n");
	48	return 0;
	49	}
	50
	51	/* called during probe() after chip reset completes */
	52	static int xhci_pci_setup(struct usb_hcd *hcd)
	53	{
f6ff0ac8	54	struct xhci_hcd *xhci;
66d4eadd SS	55	struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
66d4eadd SS	56	int retval;
006d5820	57	u32 temp;
66d4eadd	58
bc88d2eb	59	hcd->self.sg_tablesize = TRBS_PER_SEGMENT - 2;
4c1bd3d7	60
f6ff0ac8 SS	61	if (usb_hcd_is_primary_hcd(hcd)) {
	62	xhci = kzalloc(sizeof(struct xhci_hcd), GFP_KERNEL);
	63	if (!xhci)
	64	return -ENOMEM;
	65	((struct xhci_hcd *) hcd->hcd_priv) = xhci;
	66	xhci->main_hcd = hcd;
	67	/* Mark the first roothub as being USB 2.0.
	68	* The xHCI driver will register the USB 3.0 roothub.
	69	*/
	70	hcd->speed = HCD_USB2;
	71	hcd->self.root_hub->speed = USB_SPEED_HIGH;
	72	/*
	73	* USB 2.0 roothub under xHCI has an integrated TT,
	74	* (rate matching hub) as opposed to having an OHCI/UHCI
	75	* companion controller.
	76	*/
	77	hcd->has_tt = 1;
	78	} else {
	79	/* xHCI private pointer was set in xhci_pci_probe for the second
	80	* registered roothub.
	81	*/
	82	xhci = hcd_to_xhci(hcd);
	83	temp = xhci_readl(xhci, &xhci->cap_regs->hcc_params);
	84	if (HCC_64BIT_ADDR(temp)) {
	85	xhci_dbg(xhci, "Enabling 64-bit DMA addresses.\n");
	86	dma_set_mask(hcd->self.controller, DMA_BIT_MASK(64));
	87	} else {
	88	dma_set_mask(hcd->self.controller, DMA_BIT_MASK(32));
	89	}
	90	return 0;
	91	}
b02d0ed6	92
66d4eadd SS	93	xhci->cap_regs = hcd->regs;
	94	xhci->op_regs = hcd->regs +
	95	HC_LENGTH(xhci_readl(xhci, &xhci->cap_regs->hc_capbase));
	96	xhci->run_regs = hcd->regs +
	97	(xhci_readl(xhci, &xhci->cap_regs->run_regs_off) & RTSOFF_MASK);
	98	/* Cache read-only capability registers */
	99	xhci->hcs_params1 = xhci_readl(xhci, &xhci->cap_regs->hcs_params1);
	100	xhci->hcs_params2 = xhci_readl(xhci, &xhci->cap_regs->hcs_params2);
	101	xhci->hcs_params3 = xhci_readl(xhci, &xhci->cap_regs->hcs_params3);
ac1c1b7f SS	102	xhci->hcc_params = xhci_readl(xhci, &xhci->cap_regs->hc_capbase);
ac1c1b7f SS	103	xhci->hci_version = HC_VERSION(xhci->hcc_params);
66d4eadd SS	104	xhci->hcc_params = xhci_readl(xhci, &xhci->cap_regs->hcc_params);
	105	xhci_print_registers(xhci);
	106
ac9d8fe7 SS	107	/* Look for vendor-specific quirks */
	108	if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
	109	pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK &&
	110	pdev->revision == 0x0) {
	111	xhci->quirks \|= XHCI_RESET_EP_QUIRK;
	112	xhci_dbg(xhci, "QUIRK: Fresco Logic xHC needs configure"
	113	" endpoint cmd after reset endpoint\n");
	114	}
0238634d SS	115	if (pdev->vendor == PCI_VENDOR_ID_NEC)
0238634d SS	116	xhci->quirks \|= XHCI_NEC_HOST;
ac9d8fe7	117
c41136b0 AX	118	/* AMD PLL quirk */
	119	if (pdev->vendor == PCI_VENDOR_ID_AMD && usb_amd_find_chipset_info())
	120	xhci->quirks \|= XHCI_AMD_PLL_FIX;
ad808333 SS	121	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
	122	pdev->device == PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI) {
	123	xhci->quirks \|= XHCI_SPURIOUS_SUCCESS;
	124	}
c41136b0	125
66d4eadd SS	126	/* Make sure the HC is halted. */
	127	retval = xhci_halt(xhci);
	128	if (retval)
b02d0ed6	129	goto error;
66d4eadd SS	130
	131	xhci_dbg(xhci, "Resetting HCD\n");
	132	/* Reset the internal HC memory state and registers. */
	133	retval = xhci_reset(xhci);
	134	if (retval)
b02d0ed6	135	goto error;
66d4eadd SS	136	xhci_dbg(xhci, "Reset complete\n");
66d4eadd SS	137
006d5820 SS	138	temp = xhci_readl(xhci, &xhci->cap_regs->hcc_params);
	139	if (HCC_64BIT_ADDR(temp)) {
	140	xhci_dbg(xhci, "Enabling 64-bit DMA addresses.\n");
	141	dma_set_mask(hcd->self.controller, DMA_BIT_MASK(64));
	142	} else {
	143	dma_set_mask(hcd->self.controller, DMA_BIT_MASK(32));
	144	}
	145
66d4eadd SS	146	xhci_dbg(xhci, "Calling HCD init\n");
	147	/* Initialize HCD and host controller data structures. */
	148	retval = xhci_init(hcd);
	149	if (retval)
b02d0ed6	150	goto error;
66d4eadd SS	151	xhci_dbg(xhci, "Called HCD init\n");
	152
	153	pci_read_config_byte(pdev, XHCI_SBRN_OFFSET, &xhci->sbrn);
	154	xhci_dbg(xhci, "Got SBRN %u\n", (unsigned int) xhci->sbrn);
	155
	156	/* Find any debug ports */
b02d0ed6 SS	157	retval = xhci_pci_reinit(xhci, pdev);
	158	if (!retval)
	159	return retval;
	160
	161	error:
	162	kfree(xhci);
	163	return retval;
	164	}
	165
f6ff0ac8 SS	166	/*
	167	* We need to register our own PCI probe function (instead of the USB core's
	168	* function) in order to create a second roothub under xHCI.
	169	*/
	170	static int xhci_pci_probe(struct pci_dev dev, const struct pci_device_id id)
	171	{
	172	int retval;
	173	struct xhci_hcd *xhci;
	174	struct hc_driver *driver;
	175	struct usb_hcd *hcd;
	176
	177	driver = (struct hc_driver *)id->driver_data;
	178	/* Register the USB 2.0 roothub.
	179	* FIXME: USB core must know to register the USB 2.0 roothub first.
	180	* This is sort of silly, because we could just set the HCD driver flags
	181	* to say USB 2.0, but I'm not sure what the implications would be in
	182	* the other parts of the HCD code.
	183	*/
	184	retval = usb_hcd_pci_probe(dev, id);
	185
	186	if (retval)
	187	return retval;
	188
	189	/* USB 2.0 roothub is stored in the PCI device now. */
	190	hcd = dev_get_drvdata(&dev->dev);
	191	xhci = hcd_to_xhci(hcd);
	192	xhci->shared_hcd = usb_create_shared_hcd(driver, &dev->dev,
	193	pci_name(dev), hcd);
	194	if (!xhci->shared_hcd) {
	195	retval = -ENOMEM;
	196	goto dealloc_usb2_hcd;
	197	}
	198
	199	/* Set the xHCI pointer before xhci_pci_setup() (aka hcd_driver.reset)
	200	* is called by usb_add_hcd().
	201	*/
	202	((struct xhci_hcd *) xhci->shared_hcd->hcd_priv) = xhci;
	203
	204	retval = usb_add_hcd(xhci->shared_hcd, dev->irq,
	205	IRQF_DISABLED \| IRQF_SHARED);
	206	if (retval)
	207	goto put_usb3_hcd;
	208	/* Roothub already marked as USB 3.0 speed */
	209	return 0;
	210
	211	put_usb3_hcd:
	212	usb_put_hcd(xhci->shared_hcd);
	213	dealloc_usb2_hcd:
	214	usb_hcd_pci_remove(dev);
	215	return retval;
	216	}
	217
b02d0ed6 SS	218	static void xhci_pci_remove(struct pci_dev *dev)
	219	{
	220	struct xhci_hcd *xhci;
	221
	222	xhci = hcd_to_xhci(pci_get_drvdata(dev));
f6ff0ac8 SS	223	if (xhci->shared_hcd) {
	224	usb_remove_hcd(xhci->shared_hcd);
	225	usb_put_hcd(xhci->shared_hcd);
	226	}
b02d0ed6 SS	227	usb_hcd_pci_remove(dev);
b02d0ed6 SS	228	kfree(xhci);
66d4eadd SS	229	}
66d4eadd SS	230
5535b1d5 AX	231	#ifdef CONFIG_PM
	232	static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
	233	{
	234	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
	235	int retval = 0;
	236
b3209379 SS	237	if (hcd->state != HC_STATE_SUSPENDED \|\|
b3209379 SS	238	xhci->shared_hcd->state != HC_STATE_SUSPENDED)
5535b1d5 AX	239	return -EINVAL;
	240
	241	retval = xhci_suspend(xhci);
	242
	243	return retval;
	244	}
	245
	246	static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
	247	{
	248	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
69e848c2	249	struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
5535b1d5 AX	250	int retval = 0;
5535b1d5 AX	251
69e848c2 SS	252	/* The BIOS on systems with the Intel Panther Point chipset may or may
	253	* not support xHCI natively. That means that during system resume, it
	254	* may switch the ports back to EHCI so that users can use their
	255	* keyboard to select a kernel from GRUB after resume from hibernate.
	256	*
	257	* The BIOS is supposed to remember whether the OS had xHCI ports
	258	* enabled before resume, and switch the ports back to xHCI when the
	259	* BIOS/OS semaphore is written, but we all know we can't trust BIOS
	260	* writers.
	261	*
	262	* Unconditionally switch the ports back to xHCI after a system resume.
	263	* We can't tell whether the EHCI or xHCI controller will be resumed
	264	* first, so we have to do the port switchover in both drivers. Writing
	265	* a '1' to the port switchover registers should have no effect if the
	266	* port was already switched over.
	267	*/
	268	if (usb_is_intel_switchable_xhci(pdev))
	269	usb_enable_xhci_ports(pdev);
	270
5535b1d5 AX	271	retval = xhci_resume(xhci, hibernated);
	272	return retval;
	273	}
	274	#endif /* CONFIG_PM */
	275
66d4eadd SS	276	static const struct hc_driver xhci_pci_hc_driver = {
	277	.description = hcd_name,
	278	.product_desc = "xHCI Host Controller",
b02d0ed6	279	.hcd_priv_size = sizeof(struct xhci_hcd *),
66d4eadd SS	280
	281	/*
	282	* generic hardware linkage
	283	*/
7f84eef0	284	.irq = xhci_irq,
f6ff0ac8	285	.flags = HCD_MEMORY \| HCD_USB3 \| HCD_SHARED,
66d4eadd SS	286
	287	/*
	288	* basic lifecycle operations
	289	*/
	290	.reset = xhci_pci_setup,
	291	.start = xhci_run,
5535b1d5 AX	292	#ifdef CONFIG_PM
	293	.pci_suspend = xhci_pci_suspend,
	294	.pci_resume = xhci_pci_resume,
	295	#endif
66d4eadd SS	296	.stop = xhci_stop,
	297	.shutdown = xhci_shutdown,
	298
3ffbba95 SS	299	/*
	300	* managing i/o requests and associated device resources
	301	*/
d0e96f5a SS	302	.urb_enqueue = xhci_urb_enqueue,
d0e96f5a SS	303	.urb_dequeue = xhci_urb_dequeue,
3ffbba95 SS	304	.alloc_dev = xhci_alloc_dev,
3ffbba95 SS	305	.free_dev = xhci_free_dev,
eab1cafc SS	306	.alloc_streams = xhci_alloc_streams,
eab1cafc SS	307	.free_streams = xhci_free_streams,
f94e0186 SS	308	.add_endpoint = xhci_add_endpoint,
f94e0186 SS	309	.drop_endpoint = xhci_drop_endpoint,
a1587d97	310	.endpoint_reset = xhci_endpoint_reset,
f94e0186 SS	311	.check_bandwidth = xhci_check_bandwidth,
f94e0186 SS	312	.reset_bandwidth = xhci_reset_bandwidth,
3ffbba95	313	.address_device = xhci_address_device,
b356b7c7	314	.update_hub_device = xhci_update_hub_device,
f0615c45	315	.reset_device = xhci_discover_or_reset_device,
3ffbba95	316
66d4eadd SS	317	/*
	318	* scheduling support
	319	*/
	320	.get_frame_number = xhci_get_frame,
	321
0f2a7930 SS	322	/* Root hub support */
	323	.hub_control = xhci_hub_control,
	324	.hub_status_data = xhci_hub_status_data,
9777e3ce AX	325	.bus_suspend = xhci_bus_suspend,
9777e3ce AX	326	.bus_resume = xhci_bus_resume,
66d4eadd SS	327	};
	328
	329	/-------------------------------------------------------------------------/
	330
	331	/* PCI driver selection metadata; PCI hotplugging uses this */
	332	static const struct pci_device_id pci_ids[] = { {
	333	/* handle any USB 3.0 xHCI controller */
	334	PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_XHCI, ~0),
	335	.driver_data = (unsigned long) &xhci_pci_hc_driver,
	336	},
	337	{ /* end: all zeroes */ }
	338	};
	339	MODULE_DEVICE_TABLE(pci, pci_ids);
	340
	341	/* pci driver glue; this is a "new style" PCI driver module */
	342	static struct pci_driver xhci_pci_driver = {
	343	.name = (char *) hcd_name,
	344	.id_table = pci_ids,
	345
f6ff0ac8	346	.probe = xhci_pci_probe,
b02d0ed6	347	.remove = xhci_pci_remove,
66d4eadd SS	348	/* suspend and resume implemented later */
	349
	350	.shutdown = usb_hcd_pci_shutdown,
5535b1d5 AX	351	#ifdef CONFIG_PM_SLEEP
	352	.driver = {
	353	.pm = &usb_hcd_pci_pm_ops
	354	},
	355	#endif
66d4eadd SS	356	};
66d4eadd SS	357
326b4810	358	int xhci_register_pci(void)
66d4eadd SS	359	{
	360	return pci_register_driver(&xhci_pci_driver);
	361	}
	362
326b4810	363	void xhci_unregister_pci(void)
66d4eadd SS	364	{
	365	pci_unregister_driver(&xhci_pci_driver);
	366	}