projects / GitHub / mt8127 / android_kernel_alcatel_ttab.git / blame
| Commit | Line | Data |
|---|---|---|
| bc7f75fa AK |
1 | /******************************************************************************* |
| 2 | ||
| 3 | Intel PRO/1000 Linux driver | |
| f5e261e6 | 4 | Copyright(c) 1999 - 2012 Intel Corporation. |
| bc7f75fa AK |
5 | |
| 6 | This program is free software; you can redistribute it and/or modify it | |
| 7 | under the terms and conditions of the GNU General Public License, | |
| 8 | version 2, as published by the Free Software Foundation. | |
| 9 | ||
| 10 | This program is distributed in the hope it will be useful, but WITHOUT | |
| 11 | ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | |
| 12 | FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | |
| 13 | more details. | |
| 14 | ||
| 15 | You should have received a copy of the GNU General Public License along with | |
| 16 | this program; if not, write to the Free Software Foundation, Inc., | |
| 17 | 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. | |
| 18 | ||
| 19 | The full GNU General Public License is included in this distribution in | |
| 20 | the file called "COPYING". | |
| 21 | ||
| 22 | Contact Information: | |
| 23 | Linux NICS <linux.nics@intel.com> | |
| 24 | e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> | |
| 25 | Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 | |
| 26 | ||
| 27 | *******************************************************************************/ | |
| 28 | ||
| 29 | #ifndef _E1000_DEFINES_H_ | |
| 30 | #define _E1000_DEFINES_H_ | |
| 31 | ||
| 32 | #define E1000_TXD_POPTS_IXSM 0x01 /* Insert IP checksum */ | |
| 33 | #define E1000_TXD_POPTS_TXSM 0x02 /* Insert TCP/UDP checksum */ | |
| 34 | #define E1000_TXD_CMD_EOP 0x01000000 /* End of Packet */ | |
| 35 | #define E1000_TXD_CMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */ | |
| 36 | #define E1000_TXD_CMD_IC 0x04000000 /* Insert Checksum */ | |
| 37 | #define E1000_TXD_CMD_RS 0x08000000 /* Report Status */ | |
| 38 | #define E1000_TXD_CMD_RPS 0x10000000 /* Report Packet Sent */ | |
| 39 | #define E1000_TXD_CMD_DEXT 0x20000000 /* Descriptor extension (0 = legacy) */ | |
| 40 | #define E1000_TXD_CMD_VLE 0x40000000 /* Add VLAN tag */ | |
| 41 | #define E1000_TXD_CMD_IDE 0x80000000 /* Enable Tidv register */ | |
| 42 | #define E1000_TXD_STAT_DD 0x00000001 /* Descriptor Done */ | |
| 43 | #define E1000_TXD_STAT_EC 0x00000002 /* Excess Collisions */ | |
| 44 | #define E1000_TXD_STAT_LC 0x00000004 /* Late Collisions */ | |
| 45 | #define E1000_TXD_STAT_TU 0x00000008 /* Transmit underrun */ | |
| 46 | #define E1000_TXD_CMD_TCP 0x01000000 /* TCP packet */ | |
| 47 | #define E1000_TXD_CMD_IP 0x02000000 /* IP packet */ | |
| 48 | #define E1000_TXD_CMD_TSE 0x04000000 /* TCP Seg enable */ | |
| 49 | #define E1000_TXD_STAT_TC 0x00000004 /* Tx Underrun */ | |
| 50 | ||
| 51 | /* Number of Transmit and Receive Descriptors must be a multiple of 8 */ | |
| 52 | #define REQ_TX_DESCRIPTOR_MULTIPLE 8 | |
| 53 | #define REQ_RX_DESCRIPTOR_MULTIPLE 8 | |
| 54 | ||
| 55 | /* Definitions for power management and wakeup registers */ | |
| 56 | /* Wake Up Control */ | |
| 57 | #define E1000_WUC_APME 0x00000001 /* APM Enable */ | |
| 58 | #define E1000_WUC_PME_EN 0x00000002 /* PME Enable */ | |
| a4f58f54 | 59 | #define E1000_WUC_PHY_WAKE 0x00000100 /* if PHY supports wakeup */ |
| bc7f75fa AK |
60 | |
| 61 | /* Wake Up Filter Control */ | |
| 62 | #define E1000_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */ | |
| 63 | #define E1000_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */ | |
| 64 | #define E1000_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */ | |
| 65 | #define E1000_WUFC_MC 0x00000008 /* Directed Multicast Wakeup Enable */ | |
| 66 | #define E1000_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */ | |
| efb90e43 | 67 | #define E1000_WUFC_ARP 0x00000020 /* ARP Request Packet Wakeup Enable */ |
| bc7f75fa | 68 | |
| a4f58f54 BA |
69 | /* Wake Up Status */ |
| 70 | #define E1000_WUS_LNKC E1000_WUFC_LNKC | |
| 71 | #define E1000_WUS_MAG E1000_WUFC_MAG | |
| 72 | #define E1000_WUS_EX E1000_WUFC_EX | |
| 73 | #define E1000_WUS_MC E1000_WUFC_MC | |
| 74 | #define E1000_WUS_BC E1000_WUFC_BC | |
| 75 | ||
| bc7f75fa | 76 | /* Extended Device Control */ |
| 2fbe4526 | 77 | #define E1000_CTRL_EXT_LPCD 0x00000004 /* LCD Power Cycle Done */ |
| 93a23f48 | 78 | #define E1000_CTRL_EXT_SDP3_DATA 0x00000080 /* Value of SW Definable Pin 3 */ |
| ba9e186f | 79 | #define E1000_CTRL_EXT_FORCE_SMBUS 0x00000800 /* Force SMBus mode */ |
| bc7f75fa | 80 | #define E1000_CTRL_EXT_EE_RST 0x00002000 /* Reinitialize from EEPROM */ |
| 1d5846b9 | 81 | #define E1000_CTRL_EXT_SPD_BYPS 0x00008000 /* Speed Select Bypass */ |
| bc7f75fa | 82 | #define E1000_CTRL_EXT_RO_DIS 0x00020000 /* Relaxed Ordering disable */ |
| 5df3f0ea | 83 | #define E1000_CTRL_EXT_DMA_DYN_CLK_EN 0x00080000 /* DMA Dynamic Clock Gating */ |
| bc7f75fa AK |
84 | #define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000 |
| 85 | #define E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES 0x00C00000 | |
| 4662e82b | 86 | #define E1000_CTRL_EXT_EIAME 0x01000000 |
| bc7f75fa AK |
87 | #define E1000_CTRL_EXT_DRV_LOAD 0x10000000 /* Driver loaded bit for FW */ |
| 88 | #define E1000_CTRL_EXT_IAME 0x08000000 /* Interrupt acknowledge Auto-mask */ | |
| 89 | #define E1000_CTRL_EXT_INT_TIMER_CLR 0x20000000 /* Clear Interrupt timers after IMS clear */ | |
| 4662e82b | 90 | #define E1000_CTRL_EXT_PBA_CLR 0x80000000 /* PBA Clear */ |
| 23e4f061 | 91 | #define E1000_CTRL_EXT_LSECCK 0x00001000 |
| a4f58f54 | 92 | #define E1000_CTRL_EXT_PHYPDEN 0x00100000 |
| bc7f75fa | 93 | |
| 489815ce | 94 | /* Receive Descriptor bit definitions */ |
| bc7f75fa AK |
95 | #define E1000_RXD_STAT_DD 0x01 /* Descriptor Done */ |
| 96 | #define E1000_RXD_STAT_EOP 0x02 /* End of Packet */ | |
| 97 | #define E1000_RXD_STAT_IXSM 0x04 /* Ignore checksum */ | |
| 98 | #define E1000_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */ | |
| 489815ce | 99 | #define E1000_RXD_STAT_UDPCS 0x10 /* UDP xsum calculated */ |
| bc7f75fa AK |
100 | #define E1000_RXD_STAT_TCPCS 0x20 /* TCP xsum calculated */ |
| 101 | #define E1000_RXD_ERR_CE 0x01 /* CRC Error */ | |
| 102 | #define E1000_RXD_ERR_SE 0x02 /* Symbol Error */ | |
| 103 | #define E1000_RXD_ERR_SEQ 0x04 /* Sequence Error */ | |
| 104 | #define E1000_RXD_ERR_CXE 0x10 /* Carrier Extension Error */ | |
| 105 | #define E1000_RXD_ERR_TCPE 0x20 /* TCP/UDP Checksum Error */ | |
| 2e1706f2 | 106 | #define E1000_RXD_ERR_IPE 0x40 /* IP Checksum Error */ |
| bc7f75fa AK |
107 | #define E1000_RXD_ERR_RXE 0x80 /* Rx Data Error */ |
| 108 | #define E1000_RXD_SPC_VLAN_MASK 0x0FFF /* VLAN ID is in lower 12 bits */ | |
| 109 | ||
| 110 | #define E1000_RXDEXT_STATERR_CE 0x01000000 | |
| 111 | #define E1000_RXDEXT_STATERR_SE 0x02000000 | |
| 112 | #define E1000_RXDEXT_STATERR_SEQ 0x04000000 | |
| 113 | #define E1000_RXDEXT_STATERR_CXE 0x10000000 | |
| 114 | #define E1000_RXDEXT_STATERR_RXE 0x80000000 | |
| 115 | ||
| 116 | /* mask to determine if packets should be dropped due to frame errors */ | |
| 117 | #define E1000_RXD_ERR_FRAME_ERR_MASK ( \ | |
| 118 | E1000_RXD_ERR_CE | \ | |
| 119 | E1000_RXD_ERR_SE | \ | |
| 120 | E1000_RXD_ERR_SEQ | \ | |
| 121 | E1000_RXD_ERR_CXE | \ | |
| 122 | E1000_RXD_ERR_RXE) | |
| 123 | ||
| 124 | /* Same mask, but for extended and packet split descriptors */ | |
| 125 | #define E1000_RXDEXT_ERR_FRAME_ERR_MASK ( \ | |
| 126 | E1000_RXDEXT_STATERR_CE | \ | |
| 127 | E1000_RXDEXT_STATERR_SE | \ | |
| 128 | E1000_RXDEXT_STATERR_SEQ | \ | |
| 129 | E1000_RXDEXT_STATERR_CXE | \ | |
| 130 | E1000_RXDEXT_STATERR_RXE) | |
| 131 | ||
| 70495a50 BA |
132 | #define E1000_MRQC_RSS_FIELD_MASK 0xFFFF0000 |
| 133 | #define E1000_MRQC_RSS_FIELD_IPV4_TCP 0x00010000 | |
| 134 | #define E1000_MRQC_RSS_FIELD_IPV4 0x00020000 | |
| 135 | #define E1000_MRQC_RSS_FIELD_IPV6_TCP_EX 0x00040000 | |
| 136 | #define E1000_MRQC_RSS_FIELD_IPV6 0x00100000 | |
| 137 | #define E1000_MRQC_RSS_FIELD_IPV6_TCP 0x00200000 | |
| 138 | ||
| bc7f75fa AK |
139 | #define E1000_RXDPS_HDRSTAT_HDRSP 0x00008000 |
| 140 | ||
| 141 | /* Management Control */ | |
| 142 | #define E1000_MANC_SMBUS_EN 0x00000001 /* SMBus Enabled - RO */ | |
| 143 | #define E1000_MANC_ASF_EN 0x00000002 /* ASF Enabled - RO */ | |
| 144 | #define E1000_MANC_ARP_EN 0x00002000 /* Enable ARP Request Filtering */ | |
| 145 | #define E1000_MANC_RCV_TCO_EN 0x00020000 /* Receive TCO Packets Enabled */ | |
| 146 | #define E1000_MANC_BLK_PHY_RST_ON_IDE 0x00040000 /* Block phy resets */ | |
| ad68076e BA |
147 | /* Enable MAC address filtering */ |
| 148 | #define E1000_MANC_EN_MAC_ADDR_FILTER 0x00100000 | |
| 149 | /* Enable MNG packets to host memory */ | |
| 150 | #define E1000_MANC_EN_MNG2HOST 0x00200000 | |
| bc7f75fa | 151 | |
| cd791618 BA |
152 | #define E1000_MANC2H_PORT_623 0x00000020 /* Port 0x26f */ |
| 153 | #define E1000_MANC2H_PORT_664 0x00000040 /* Port 0x298 */ | |
| 154 | #define E1000_MDEF_PORT_623 0x00000800 /* Port 0x26f */ | |
| 155 | #define E1000_MDEF_PORT_664 0x00000400 /* Port 0x298 */ | |
| 156 | ||
| bc7f75fa AK |
157 | /* Receive Control */ |
| 158 | #define E1000_RCTL_EN 0x00000002 /* enable */ | |
| 159 | #define E1000_RCTL_SBP 0x00000004 /* store bad packet */ | |
| 160 | #define E1000_RCTL_UPE 0x00000008 /* unicast promiscuous enable */ | |
| 161 | #define E1000_RCTL_MPE 0x00000010 /* multicast promiscuous enab */ | |
| 162 | #define E1000_RCTL_LPE 0x00000020 /* long packet enable */ | |
| 163 | #define E1000_RCTL_LBM_NO 0x00000000 /* no loopback mode */ | |
| 164 | #define E1000_RCTL_LBM_MAC 0x00000040 /* MAC loopback mode */ | |
| 165 | #define E1000_RCTL_LBM_TCVR 0x000000C0 /* tcvr loopback mode */ | |
| 166 | #define E1000_RCTL_DTYP_PS 0x00000400 /* Packet Split descriptor */ | |
| ad68076e | 167 | #define E1000_RCTL_RDMTS_HALF 0x00000000 /* Rx desc min threshold size */ |
| bc7f75fa | 168 | #define E1000_RCTL_MO_SHIFT 12 /* multicast offset shift */ |
| a4f58f54 | 169 | #define E1000_RCTL_MO_3 0x00003000 /* multicast offset 15:4 */ |
| bc7f75fa AK |
170 | #define E1000_RCTL_BAM 0x00008000 /* broadcast enable */ |
| 171 | /* these buffer sizes are valid if E1000_RCTL_BSEX is 0 */ | |
| ad68076e BA |
172 | #define E1000_RCTL_SZ_2048 0x00000000 /* Rx buffer size 2048 */ |
| 173 | #define E1000_RCTL_SZ_1024 0x00010000 /* Rx buffer size 1024 */ | |
| 174 | #define E1000_RCTL_SZ_512 0x00020000 /* Rx buffer size 512 */ | |
| 175 | #define E1000_RCTL_SZ_256 0x00030000 /* Rx buffer size 256 */ | |
| bc7f75fa | 176 | /* these buffer sizes are valid if E1000_RCTL_BSEX is 1 */ |
| ad68076e BA |
177 | #define E1000_RCTL_SZ_16384 0x00010000 /* Rx buffer size 16384 */ |
| 178 | #define E1000_RCTL_SZ_8192 0x00020000 /* Rx buffer size 8192 */ | |
| 179 | #define E1000_RCTL_SZ_4096 0x00030000 /* Rx buffer size 4096 */ | |
| bc7f75fa AK |
180 | #define E1000_RCTL_VFE 0x00040000 /* vlan filter enable */ |
| 181 | #define E1000_RCTL_CFIEN 0x00080000 /* canonical form enable */ | |
| 182 | #define E1000_RCTL_CFI 0x00100000 /* canonical form indicator */ | |
| cf955e6c | 183 | #define E1000_RCTL_DPF 0x00400000 /* Discard Pause Frames */ |
| a4f58f54 | 184 | #define E1000_RCTL_PMCF 0x00800000 /* pass MAC control frames */ |
| bc7f75fa AK |
185 | #define E1000_RCTL_BSEX 0x02000000 /* Buffer size extension */ |
| 186 | #define E1000_RCTL_SECRC 0x04000000 /* Strip Ethernet CRC */ | |
| 187 | ||
| ad68076e BA |
188 | /* |
| 189 | * Use byte values for the following shift parameters | |
| bc7f75fa AK |
190 | * Usage: |
| 191 | * psrctl |= (((ROUNDUP(value0, 128) >> E1000_PSRCTL_BSIZE0_SHIFT) & | |
| 192 | * E1000_PSRCTL_BSIZE0_MASK) | | |
| 193 | * ((ROUNDUP(value1, 1024) >> E1000_PSRCTL_BSIZE1_SHIFT) & | |
| 194 | * E1000_PSRCTL_BSIZE1_MASK) | | |
| 195 | * ((ROUNDUP(value2, 1024) << E1000_PSRCTL_BSIZE2_SHIFT) & | |
| 196 | * E1000_PSRCTL_BSIZE2_MASK) | | |
| 197 | * ((ROUNDUP(value3, 1024) << E1000_PSRCTL_BSIZE3_SHIFT) |; | |
| 198 | * E1000_PSRCTL_BSIZE3_MASK)) | |
| 199 | * where value0 = [128..16256], default=256 | |
| 200 | * value1 = [1024..64512], default=4096 | |
| 201 | * value2 = [0..64512], default=4096 | |
| 202 | * value3 = [0..64512], default=0 | |
| 203 | */ | |
| 204 | ||
| 205 | #define E1000_PSRCTL_BSIZE0_MASK 0x0000007F | |
| 206 | #define E1000_PSRCTL_BSIZE1_MASK 0x00003F00 | |
| 207 | #define E1000_PSRCTL_BSIZE2_MASK 0x003F0000 | |
| 208 | #define E1000_PSRCTL_BSIZE3_MASK 0x3F000000 | |
| 209 | ||
| 210 | #define E1000_PSRCTL_BSIZE0_SHIFT 7 /* Shift _right_ 7 */ | |
| 211 | #define E1000_PSRCTL_BSIZE1_SHIFT 2 /* Shift _right_ 2 */ | |
| 212 | #define E1000_PSRCTL_BSIZE2_SHIFT 6 /* Shift _left_ 6 */ | |
| 213 | #define E1000_PSRCTL_BSIZE3_SHIFT 14 /* Shift _left_ 14 */ | |
| 214 | ||
| 215 | /* SWFW_SYNC Definitions */ | |
| 216 | #define E1000_SWFW_EEP_SM 0x1 | |
| 217 | #define E1000_SWFW_PHY0_SM 0x2 | |
| 218 | #define E1000_SWFW_PHY1_SM 0x4 | |
| 2d9498f3 | 219 | #define E1000_SWFW_CSR_SM 0x8 |
| bc7f75fa AK |
220 | |
| 221 | /* Device Control */ | |
| 222 | #define E1000_CTRL_FD 0x00000001 /* Full duplex.0=half; 1=full */ | |
| 223 | #define E1000_CTRL_GIO_MASTER_DISABLE 0x00000004 /*Blocks new Master requests */ | |
| 224 | #define E1000_CTRL_LRST 0x00000008 /* Link reset. 0=normal,1=reset */ | |
| 225 | #define E1000_CTRL_ASDE 0x00000020 /* Auto-speed detect enable */ | |
| 226 | #define E1000_CTRL_SLU 0x00000040 /* Set link up (Force Link) */ | |
| 227 | #define E1000_CTRL_ILOS 0x00000080 /* Invert Loss-Of Signal */ | |
| 228 | #define E1000_CTRL_SPD_SEL 0x00000300 /* Speed Select Mask */ | |
| 229 | #define E1000_CTRL_SPD_10 0x00000000 /* Force 10Mb */ | |
| 230 | #define E1000_CTRL_SPD_100 0x00000100 /* Force 100Mb */ | |
| 231 | #define E1000_CTRL_SPD_1000 0x00000200 /* Force 1Gb */ | |
| 232 | #define E1000_CTRL_FRCSPD 0x00000800 /* Force Speed */ | |
| 233 | #define E1000_CTRL_FRCDPX 0x00001000 /* Force Duplex */ | |
| 6dfaa769 BA |
234 | #define E1000_CTRL_LANPHYPC_OVERRIDE 0x00010000 /* SW control of LANPHYPC */ |
| 235 | #define E1000_CTRL_LANPHYPC_VALUE 0x00020000 /* SW value of LANPHYPC */ | |
| bc7f75fa AK |
236 | #define E1000_CTRL_SWDPIN0 0x00040000 /* SWDPIN 0 value */ |
| 237 | #define E1000_CTRL_SWDPIN1 0x00080000 /* SWDPIN 1 value */ | |
| 238 | #define E1000_CTRL_SWDPIO0 0x00400000 /* SWDPIN 0 Input or output */ | |
| 239 | #define E1000_CTRL_RST 0x04000000 /* Global reset */ | |
| 240 | #define E1000_CTRL_RFCE 0x08000000 /* Receive Flow Control enable */ | |
| 241 | #define E1000_CTRL_TFCE 0x10000000 /* Transmit flow control enable */ | |
| 242 | #define E1000_CTRL_VME 0x40000000 /* IEEE VLAN mode enable */ | |
| 243 | #define E1000_CTRL_PHY_RST 0x80000000 /* PHY Reset */ | |
| 244 | ||
| ad68076e BA |
245 | /* |
| 246 | * Bit definitions for the Management Data IO (MDIO) and Management Data | |
| bc7f75fa AK |
247 | * Clock (MDC) pins in the Device Control Register. |
| 248 | */ | |
| 249 | ||
| 250 | /* Device Status */ | |
| 251 | #define E1000_STATUS_FD 0x00000001 /* Full duplex.0=half,1=full */ | |
| 252 | #define E1000_STATUS_LU 0x00000002 /* Link up.0=no,1=link */ | |
| 253 | #define E1000_STATUS_FUNC_MASK 0x0000000C /* PCI Function Mask */ | |
| 254 | #define E1000_STATUS_FUNC_SHIFT 2 | |
| 255 | #define E1000_STATUS_FUNC_1 0x00000004 /* Function 1 */ | |
| 256 | #define E1000_STATUS_TXOFF 0x00000010 /* transmission paused */ | |
| 257 | #define E1000_STATUS_SPEED_10 0x00000000 /* Speed 10Mb/s */ | |
| 258 | #define E1000_STATUS_SPEED_100 0x00000040 /* Speed 100Mb/s */ | |
| 259 | #define E1000_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */ | |
| 260 | #define E1000_STATUS_LAN_INIT_DONE 0x00000200 /* Lan Init Completion by NVM */ | |
| fc0c7760 | 261 | #define E1000_STATUS_PHYRA 0x00000400 /* PHY Reset Asserted */ |
| bc7f75fa AK |
262 | #define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Status of Master requests. */ |
| 263 | ||
| 489815ce | 264 | /* Constants used to interpret the masked PCI-X bus speed. */ |
| bc7f75fa AK |
265 | |
| 266 | #define HALF_DUPLEX 1 | |
| 267 | #define FULL_DUPLEX 2 | |
| 268 | ||
| 269 | ||
| 270 | #define ADVERTISE_10_HALF 0x0001 | |
| 271 | #define ADVERTISE_10_FULL 0x0002 | |
| 272 | #define ADVERTISE_100_HALF 0x0004 | |
| 273 | #define ADVERTISE_100_FULL 0x0008 | |
| 274 | #define ADVERTISE_1000_HALF 0x0010 /* Not used, just FYI */ | |
| 275 | #define ADVERTISE_1000_FULL 0x0020 | |
| 276 | ||
| 277 | /* 1000/H is not supported, nor spec-compliant. */ | |
| 278 | #define E1000_ALL_SPEED_DUPLEX ( ADVERTISE_10_HALF | ADVERTISE_10_FULL | \ | |
| 279 | ADVERTISE_100_HALF | ADVERTISE_100_FULL | \ | |
| 280 | ADVERTISE_1000_FULL) | |
| 281 | #define E1000_ALL_NOT_GIG ( ADVERTISE_10_HALF | ADVERTISE_10_FULL | \ | |
| 282 | ADVERTISE_100_HALF | ADVERTISE_100_FULL) | |
| 283 | #define E1000_ALL_100_SPEED (ADVERTISE_100_HALF | ADVERTISE_100_FULL) | |
| 284 | #define E1000_ALL_10_SPEED (ADVERTISE_10_HALF | ADVERTISE_10_FULL) | |
| 285 | #define E1000_ALL_HALF_DUPLEX (ADVERTISE_10_HALF | ADVERTISE_100_HALF) | |
| 286 | ||
| 287 | #define AUTONEG_ADVERTISE_SPEED_DEFAULT E1000_ALL_SPEED_DUPLEX | |
| 288 | ||
| 289 | /* LED Control */ | |
| a4f58f54 BA |
290 | #define E1000_PHY_LED0_MODE_MASK 0x00000007 |
| 291 | #define E1000_PHY_LED0_IVRT 0x00000008 | |
| 292 | #define E1000_PHY_LED0_MASK 0x0000001F | |
| 293 | ||
| bc7f75fa AK |
294 | #define E1000_LEDCTL_LED0_MODE_MASK 0x0000000F |
| 295 | #define E1000_LEDCTL_LED0_MODE_SHIFT 0 | |
| 296 | #define E1000_LEDCTL_LED0_IVRT 0x00000040 | |
| 297 | #define E1000_LEDCTL_LED0_BLINK 0x00000080 | |
| 298 | ||
| a4f58f54 | 299 | #define E1000_LEDCTL_MODE_LINK_UP 0x2 |
| bc7f75fa AK |
300 | #define E1000_LEDCTL_MODE_LED_ON 0xE |
| 301 | #define E1000_LEDCTL_MODE_LED_OFF 0xF | |
| 302 | ||
| 303 | /* Transmit Descriptor bit definitions */ | |
| 304 | #define E1000_TXD_DTYP_D 0x00100000 /* Data Descriptor */ | |
| 305 | #define E1000_TXD_POPTS_IXSM 0x01 /* Insert IP checksum */ | |
| 306 | #define E1000_TXD_POPTS_TXSM 0x02 /* Insert TCP/UDP checksum */ | |
| 307 | #define E1000_TXD_CMD_EOP 0x01000000 /* End of Packet */ | |
| 308 | #define E1000_TXD_CMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */ | |
| 309 | #define E1000_TXD_CMD_IC 0x04000000 /* Insert Checksum */ | |
| 310 | #define E1000_TXD_CMD_RS 0x08000000 /* Report Status */ | |
| 311 | #define E1000_TXD_CMD_RPS 0x10000000 /* Report Packet Sent */ | |
| 312 | #define E1000_TXD_CMD_DEXT 0x20000000 /* Descriptor extension (0 = legacy) */ | |
| 313 | #define E1000_TXD_CMD_VLE 0x40000000 /* Add VLAN tag */ | |
| 314 | #define E1000_TXD_CMD_IDE 0x80000000 /* Enable Tidv register */ | |
| 315 | #define E1000_TXD_STAT_DD 0x00000001 /* Descriptor Done */ | |
| 316 | #define E1000_TXD_STAT_EC 0x00000002 /* Excess Collisions */ | |
| 317 | #define E1000_TXD_STAT_LC 0x00000004 /* Late Collisions */ | |
| 318 | #define E1000_TXD_STAT_TU 0x00000008 /* Transmit underrun */ | |
| 319 | #define E1000_TXD_CMD_TCP 0x01000000 /* TCP packet */ | |
| 320 | #define E1000_TXD_CMD_IP 0x02000000 /* IP packet */ | |
| 321 | #define E1000_TXD_CMD_TSE 0x04000000 /* TCP Seg enable */ | |
| 322 | #define E1000_TXD_STAT_TC 0x00000004 /* Tx Underrun */ | |
| 323 | ||
| 324 | /* Transmit Control */ | |
| ad68076e | 325 | #define E1000_TCTL_EN 0x00000002 /* enable Tx */ |
| bc7f75fa AK |
326 | #define E1000_TCTL_PSP 0x00000008 /* pad short packets */ |
| 327 | #define E1000_TCTL_CT 0x00000ff0 /* collision threshold */ | |
| 328 | #define E1000_TCTL_COLD 0x003ff000 /* collision distance */ | |
| 329 | #define E1000_TCTL_RTLC 0x01000000 /* Re-transmit on late collision */ | |
| 330 | #define E1000_TCTL_MULR 0x10000000 /* Multiple request support */ | |
| 331 | ||
| 332 | /* Transmit Arbitration Count */ | |
| 333 | ||
| 334 | /* SerDes Control */ | |
| 335 | #define E1000_SCTL_DISABLE_SERDES_LOOPBACK 0x0400 | |
| 336 | ||
| 337 | /* Receive Checksum Control */ | |
| 338 | #define E1000_RXCSUM_TUOFL 0x00000200 /* TCP / UDP checksum offload */ | |
| 339 | #define E1000_RXCSUM_IPPCSE 0x00001000 /* IP payload checksum enable */ | |
| 70495a50 | 340 | #define E1000_RXCSUM_PCSD 0x00002000 /* packet checksum disabled */ |
| bc7f75fa AK |
341 | |
| 342 | /* Header split receive */ | |
| a80483d3 JB |
343 | #define E1000_RFCTL_NFSW_DIS 0x00000040 |
| 344 | #define E1000_RFCTL_NFSR_DIS 0x00000080 | |
| 4662e82b | 345 | #define E1000_RFCTL_ACK_DIS 0x00001000 |
| bc7f75fa AK |
346 | #define E1000_RFCTL_EXTEN 0x00008000 |
| 347 | #define E1000_RFCTL_IPV6_EX_DIS 0x00010000 | |
| 348 | #define E1000_RFCTL_NEW_IPV6_EXT_DIS 0x00020000 | |
| 349 | ||
| 350 | /* Collision related configuration parameters */ | |
| 351 | #define E1000_COLLISION_THRESHOLD 15 | |
| 352 | #define E1000_CT_SHIFT 4 | |
| 353 | #define E1000_COLLISION_DISTANCE 63 | |
| 354 | #define E1000_COLD_SHIFT 12 | |
| 355 | ||
| 356 | /* Default values for the transmit IPG register */ | |
| 357 | #define DEFAULT_82543_TIPG_IPGT_COPPER 8 | |
| 358 | ||
| 359 | #define E1000_TIPG_IPGT_MASK 0x000003FF | |
| 360 | ||
| 361 | #define DEFAULT_82543_TIPG_IPGR1 8 | |
| 362 | #define E1000_TIPG_IPGR1_SHIFT 10 | |
| 363 | ||
| 364 | #define DEFAULT_82543_TIPG_IPGR2 6 | |
| 365 | #define DEFAULT_80003ES2LAN_TIPG_IPGR2 7 | |
| 366 | #define E1000_TIPG_IPGR2_SHIFT 20 | |
| 367 | ||
| 368 | #define MAX_JUMBO_FRAME_SIZE 0x3F00 | |
| 369 | ||
| 370 | /* Extended Configuration Control and Size */ | |
| 371 | #define E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP 0x00000020 | |
| 372 | #define E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE 0x00000001 | |
| f523d211 | 373 | #define E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE 0x00000008 |
| bc7f75fa | 374 | #define E1000_EXTCNF_CTRL_SWFLAG 0x00000020 |
| d3738bb8 | 375 | #define E1000_EXTCNF_CTRL_GATE_PHY_CFG 0x00000080 |
| bc7f75fa AK |
376 | #define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK 0x00FF0000 |
| 377 | #define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT 16 | |
| 378 | #define E1000_EXTCNF_CTRL_EXT_CNF_POINTER_MASK 0x0FFF0000 | |
| 379 | #define E1000_EXTCNF_CTRL_EXT_CNF_POINTER_SHIFT 16 | |
| 380 | ||
| 381 | #define E1000_PHY_CTRL_D0A_LPLU 0x00000002 | |
| 382 | #define E1000_PHY_CTRL_NOND0A_LPLU 0x00000004 | |
| 383 | #define E1000_PHY_CTRL_NOND0A_GBE_DISABLE 0x00000008 | |
| 384 | #define E1000_PHY_CTRL_GBE_DISABLE 0x00000040 | |
| 385 | ||
| 386 | #define E1000_KABGTXD_BGSQLBIAS 0x00050000 | |
| 387 | ||
| 388 | /* PBA constants */ | |
| ad68076e BA |
389 | #define E1000_PBA_8K 0x0008 /* 8KB */ |
| 390 | #define E1000_PBA_16K 0x0010 /* 16KB */ | |
| bc7f75fa AK |
391 | |
| 392 | #define E1000_PBS_16K E1000_PBA_16K | |
| 393 | ||
| 394 | #define IFS_MAX 80 | |
| 395 | #define IFS_MIN 40 | |
| 396 | #define IFS_RATIO 4 | |
| 397 | #define IFS_STEP 10 | |
| 398 | #define MIN_NUM_XMITS 1000 | |
| 399 | ||
| 400 | /* SW Semaphore Register */ | |
| 401 | #define E1000_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */ | |
| 402 | #define E1000_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */ | |
| 403 | #define E1000_SWSM_DRV_LOAD 0x00000008 /* Driver Loaded Bit */ | |
| 23a2d1b2 DG |
404 | |
| 405 | #define E1000_SWSM2_LOCK 0x00000002 /* Secondary driver semaphore bit */ | |
| bc7f75fa AK |
406 | |
| 407 | /* Interrupt Cause Read */ | |
| 408 | #define E1000_ICR_TXDW 0x00000001 /* Transmit desc written back */ | |
| 409 | #define E1000_ICR_LSC 0x00000004 /* Link Status Change */ | |
| ad68076e BA |
410 | #define E1000_ICR_RXSEQ 0x00000008 /* Rx sequence error */ |
| 411 | #define E1000_ICR_RXDMT0 0x00000010 /* Rx desc min. threshold (0) */ | |
| 412 | #define E1000_ICR_RXT0 0x00000080 /* Rx timer intr (ring 0) */ | |
| bc7f75fa | 413 | #define E1000_ICR_INT_ASSERTED 0x80000000 /* If this bit asserted, the driver should claim the interrupt */ |
| 4662e82b BA |
414 | #define E1000_ICR_RXQ0 0x00100000 /* Rx Queue 0 Interrupt */ |
| 415 | #define E1000_ICR_RXQ1 0x00200000 /* Rx Queue 1 Interrupt */ | |
| 416 | #define E1000_ICR_TXQ0 0x00400000 /* Tx Queue 0 Interrupt */ | |
| 417 | #define E1000_ICR_TXQ1 0x00800000 /* Tx Queue 1 Interrupt */ | |
| 418 | #define E1000_ICR_OTHER 0x01000000 /* Other Interrupts */ | |
| bc7f75fa | 419 | |
| 6ea7ae1d AD |
420 | /* PBA ECC Register */ |
| 421 | #define E1000_PBA_ECC_COUNTER_MASK 0xFFF00000 /* ECC counter mask */ | |
| 422 | #define E1000_PBA_ECC_COUNTER_SHIFT 20 /* ECC counter shift value */ | |
| 423 | #define E1000_PBA_ECC_CORR_EN 0x00000001 /* ECC correction enable */ | |
| 424 | #define E1000_PBA_ECC_STAT_CLR 0x00000002 /* Clear ECC error counter */ | |
| 425 | #define E1000_PBA_ECC_INT_EN 0x00000004 /* Enable ICR bit 5 for ECC */ | |
| 426 | ||
| ad68076e BA |
427 | /* |
| 428 | * This defines the bits that are set in the Interrupt Mask | |
| bc7f75fa AK |
429 | * Set/Read Register. Each bit is documented below: |
| 430 | * o RXT0 = Receiver Timer Interrupt (ring 0) | |
| 431 | * o TXDW = Transmit Descriptor Written Back | |
| 432 | * o RXDMT0 = Receive Descriptor Minimum Threshold hit (ring 0) | |
| 433 | * o RXSEQ = Receive Sequence Error | |
| 434 | * o LSC = Link Status Change | |
| 435 | */ | |
| 436 | #define IMS_ENABLE_MASK ( \ | |
| 437 | E1000_IMS_RXT0 | \ | |
| 438 | E1000_IMS_TXDW | \ | |
| 439 | E1000_IMS_RXDMT0 | \ | |
| 440 | E1000_IMS_RXSEQ | \ | |
| 441 | E1000_IMS_LSC) | |
| 442 | ||
| 443 | /* Interrupt Mask Set */ | |
| 444 | #define E1000_IMS_TXDW E1000_ICR_TXDW /* Transmit desc written back */ | |
| 445 | #define E1000_IMS_LSC E1000_ICR_LSC /* Link Status Change */ | |
| ad68076e BA |
446 | #define E1000_IMS_RXSEQ E1000_ICR_RXSEQ /* Rx sequence error */ |
| 447 | #define E1000_IMS_RXDMT0 E1000_ICR_RXDMT0 /* Rx desc min. threshold */ | |
| 448 | #define E1000_IMS_RXT0 E1000_ICR_RXT0 /* Rx timer intr */ | |
| 4662e82b BA |
449 | #define E1000_IMS_RXQ0 E1000_ICR_RXQ0 /* Rx Queue 0 Interrupt */ |
| 450 | #define E1000_IMS_RXQ1 E1000_ICR_RXQ1 /* Rx Queue 1 Interrupt */ | |
| 451 | #define E1000_IMS_TXQ0 E1000_ICR_TXQ0 /* Tx Queue 0 Interrupt */ | |
| 452 | #define E1000_IMS_TXQ1 E1000_ICR_TXQ1 /* Tx Queue 1 Interrupt */ | |
| 453 | #define E1000_IMS_OTHER E1000_ICR_OTHER /* Other Interrupts */ | |
| bc7f75fa AK |
454 | |
| 455 | /* Interrupt Cause Set */ | |
| 456 | #define E1000_ICS_LSC E1000_ICR_LSC /* Link Status Change */ | |
| f8d59f78 | 457 | #define E1000_ICS_RXSEQ E1000_ICR_RXSEQ /* Rx sequence error */ |
| ad68076e | 458 | #define E1000_ICS_RXDMT0 E1000_ICR_RXDMT0 /* Rx desc min. threshold */ |
| bc7f75fa AK |
459 | |
| 460 | /* Transmit Descriptor Control */ | |
| 461 | #define E1000_TXDCTL_PTHRESH 0x0000003F /* TXDCTL Prefetch Threshold */ | |
| 3a3b7586 | 462 | #define E1000_TXDCTL_HTHRESH 0x00003F00 /* TXDCTL Host Threshold */ |
| bc7f75fa | 463 | #define E1000_TXDCTL_WTHRESH 0x003F0000 /* TXDCTL Writeback Threshold */ |
| 3a3b7586 | 464 | #define E1000_TXDCTL_GRAN 0x01000000 /* TXDCTL Granularity */ |
| bc7f75fa AK |
465 | #define E1000_TXDCTL_FULL_TX_DESC_WB 0x01010000 /* GRAN=1, WTHRESH=1 */ |
| 466 | #define E1000_TXDCTL_MAX_TX_DESC_PREFETCH 0x0100001F /* GRAN=1, PTHRESH=31 */ | |
| ad68076e BA |
467 | /* Enable the counting of desc. still to be processed. */ |
| 468 | #define E1000_TXDCTL_COUNT_DESC 0x00400000 | |
| bc7f75fa AK |
469 | |
| 470 | /* Flow Control Constants */ | |
| 471 | #define FLOW_CONTROL_ADDRESS_LOW 0x00C28001 | |
| 472 | #define FLOW_CONTROL_ADDRESS_HIGH 0x00000100 | |
| 473 | #define FLOW_CONTROL_TYPE 0x8808 | |
| 474 | ||
| 475 | /* 802.1q VLAN Packet Size */ | |
| 476 | #define E1000_VLAN_FILTER_TBL_SIZE 128 /* VLAN Filter Table (4096 bits) */ | |
| 477 | ||
| 478 | /* Receive Address */ | |
| ad68076e BA |
479 | /* |
| 480 | * Number of high/low register pairs in the RAR. The RAR (Receive Address | |
| bc7f75fa AK |
481 | * Registers) holds the directed and multicast addresses that we monitor. |
| 482 | * Technically, we have 16 spots. However, we reserve one of these spots | |
| 483 | * (RAR[15]) for our directed address used by controllers with | |
| 484 | * manageability enabled, allowing us room for 15 multicast addresses. | |
| 485 | */ | |
| 486 | #define E1000_RAR_ENTRIES 15 | |
| 487 | #define E1000_RAH_AV 0x80000000 /* Receive descriptor valid */ | |
| 608f8a0d BA |
488 | #define E1000_RAL_MAC_ADDR_LEN 4 |
| 489 | #define E1000_RAH_MAC_ADDR_LEN 2 | |
| bc7f75fa AK |
490 | |
| 491 | /* Error Codes */ | |
| 492 | #define E1000_ERR_NVM 1 | |
| 493 | #define E1000_ERR_PHY 2 | |
| 494 | #define E1000_ERR_CONFIG 3 | |
| 495 | #define E1000_ERR_PARAM 4 | |
| 496 | #define E1000_ERR_MAC_INIT 5 | |
| 497 | #define E1000_ERR_PHY_TYPE 6 | |
| 498 | #define E1000_ERR_RESET 9 | |
| 499 | #define E1000_ERR_MASTER_REQUESTS_PENDING 10 | |
| 500 | #define E1000_ERR_HOST_INTERFACE_COMMAND 11 | |
| 501 | #define E1000_BLK_PHY_RESET 12 | |
| 502 | #define E1000_ERR_SWFW_SYNC 13 | |
| 503 | #define E1000_NOT_IMPLEMENTED 14 | |
| 073287c0 BA |
504 | #define E1000_ERR_INVALID_ARGUMENT 16 |
| 505 | #define E1000_ERR_NO_SPACE 17 | |
| 506 | #define E1000_ERR_NVM_PBA_SECTION 18 | |
| bc7f75fa AK |
507 | |
| 508 | /* Loop limit on how long we wait for auto-negotiation to complete */ | |
| 509 | #define FIBER_LINK_UP_LIMIT 50 | |
| 510 | #define COPPER_LINK_UP_LIMIT 10 | |
| 511 | #define PHY_AUTO_NEG_LIMIT 45 | |
| 512 | #define PHY_FORCE_LIMIT 20 | |
| 513 | /* Number of 100 microseconds we wait for PCI Express master disable */ | |
| 514 | #define MASTER_DISABLE_TIMEOUT 800 | |
| 515 | /* Number of milliseconds we wait for PHY configuration done after MAC reset */ | |
| 516 | #define PHY_CFG_TIMEOUT 100 | |
| 517 | /* Number of 2 milliseconds we wait for acquiring MDIO ownership. */ | |
| 518 | #define MDIO_OWNERSHIP_TIMEOUT 10 | |
| 519 | /* Number of milliseconds for NVM auto read done after MAC reset. */ | |
| 520 | #define AUTO_READ_DONE_TIMEOUT 10 | |
| 521 | ||
| 522 | /* Flow Control */ | |
| 3ec2a2b8 BA |
523 | #define E1000_FCRTH_RTH 0x0000FFF8 /* Mask Bits[15:3] for RTH */ |
| 524 | #define E1000_FCRTL_RTL 0x0000FFF8 /* Mask Bits[15:3] for RTL */ | |
| bc7f75fa AK |
525 | #define E1000_FCRTL_XONE 0x80000000 /* Enable XON frame transmission */ |
| 526 | ||
| 527 | /* Transmit Configuration Word */ | |
| 528 | #define E1000_TXCW_FD 0x00000020 /* TXCW full duplex */ | |
| 529 | #define E1000_TXCW_PAUSE 0x00000080 /* TXCW sym pause request */ | |
| 530 | #define E1000_TXCW_ASM_DIR 0x00000100 /* TXCW astm pause direction */ | |
| 531 | #define E1000_TXCW_PAUSE_MASK 0x00000180 /* TXCW pause request mask */ | |
| 532 | #define E1000_TXCW_ANE 0x80000000 /* Auto-neg enable */ | |
| 533 | ||
| 534 | /* Receive Configuration Word */ | |
| d478eb44 | 535 | #define E1000_RXCW_CW 0x0000ffff /* RxConfigWord mask */ |
| bc7f75fa AK |
536 | #define E1000_RXCW_IV 0x08000000 /* Receive config invalid */ |
| 537 | #define E1000_RXCW_C 0x20000000 /* Receive config */ | |
| 538 | #define E1000_RXCW_SYNCH 0x40000000 /* Receive config synch */ | |
| 539 | ||
| 540 | /* PCI Express Control */ | |
| 541 | #define E1000_GCR_RXD_NO_SNOOP 0x00000001 | |
| 542 | #define E1000_GCR_RXDSCW_NO_SNOOP 0x00000002 | |
| 543 | #define E1000_GCR_RXDSCR_NO_SNOOP 0x00000004 | |
| 544 | #define E1000_GCR_TXD_NO_SNOOP 0x00000008 | |
| 545 | #define E1000_GCR_TXDSCW_NO_SNOOP 0x00000010 | |
| 546 | #define E1000_GCR_TXDSCR_NO_SNOOP 0x00000020 | |
| 547 | ||
| 548 | #define PCIE_NO_SNOOP_ALL (E1000_GCR_RXD_NO_SNOOP | \ | |
| 549 | E1000_GCR_RXDSCW_NO_SNOOP | \ | |
| 550 | E1000_GCR_RXDSCR_NO_SNOOP | \ | |
| 551 | E1000_GCR_TXD_NO_SNOOP | \ | |
| 552 | E1000_GCR_TXDSCW_NO_SNOOP | \ | |
| 553 | E1000_GCR_TXDSCR_NO_SNOOP) | |
| 554 | ||
| 555 | /* PHY Control Register */ | |
| 556 | #define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */ | |
| 557 | #define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */ | |
| 558 | #define MII_CR_POWER_DOWN 0x0800 /* Power down */ | |
| 559 | #define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */ | |
| 560 | #define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */ | |
| 561 | #define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */ | |
| 562 | #define MII_CR_SPEED_1000 0x0040 | |
| 563 | #define MII_CR_SPEED_100 0x2000 | |
| 564 | #define MII_CR_SPEED_10 0x0000 | |
| 565 | ||
| 566 | /* PHY Status Register */ | |
| 567 | #define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */ | |
| 568 | #define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */ | |
| 569 | ||
| 570 | /* Autoneg Advertisement Register */ | |
| 571 | #define NWAY_AR_10T_HD_CAPS 0x0020 /* 10T Half Duplex Capable */ | |
| 572 | #define NWAY_AR_10T_FD_CAPS 0x0040 /* 10T Full Duplex Capable */ | |
| 573 | #define NWAY_AR_100TX_HD_CAPS 0x0080 /* 100TX Half Duplex Capable */ | |
| 574 | #define NWAY_AR_100TX_FD_CAPS 0x0100 /* 100TX Full Duplex Capable */ | |
| 575 | #define NWAY_AR_PAUSE 0x0400 /* Pause operation desired */ | |
| 576 | #define NWAY_AR_ASM_DIR 0x0800 /* Asymmetric Pause Direction bit */ | |
| 577 | ||
| 578 | /* Link Partner Ability Register (Base Page) */ | |
| 2fbe4526 | 579 | #define NWAY_LPAR_100TX_FD_CAPS 0x0100 /* LP 100TX Full Dplx Capable */ |
| bc7f75fa AK |
580 | #define NWAY_LPAR_PAUSE 0x0400 /* LP Pause operation desired */ |
| 581 | #define NWAY_LPAR_ASM_DIR 0x0800 /* LP Asymmetric Pause Direction bit */ | |
| 582 | ||
| 583 | /* Autoneg Expansion Register */ | |
| f4187b56 | 584 | #define NWAY_ER_LP_NWAY_CAPS 0x0001 /* LP has Auto Neg Capability */ |
| bc7f75fa AK |
585 | |
| 586 | /* 1000BASE-T Control Register */ | |
| 587 | #define CR_1000T_HD_CAPS 0x0100 /* Advertise 1000T HD capability */ | |
| 588 | #define CR_1000T_FD_CAPS 0x0200 /* Advertise 1000T FD capability */ | |
| 589 | /* 0=DTE device */ | |
| 590 | #define CR_1000T_MS_VALUE 0x0800 /* 1=Configure PHY as Master */ | |
| 591 | /* 0=Configure PHY as Slave */ | |
| 592 | #define CR_1000T_MS_ENABLE 0x1000 /* 1=Master/Slave manual config value */ | |
| 593 | /* 0=Automatic Master/Slave config */ | |
| 594 | ||
| 595 | /* 1000BASE-T Status Register */ | |
| 596 | #define SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */ | |
| 597 | #define SR_1000T_LOCAL_RX_STATUS 0x2000 /* Local receiver OK */ | |
| 598 | ||
| 599 | ||
| 600 | /* PHY 1000 MII Register/Bit Definitions */ | |
| 601 | /* PHY Registers defined by IEEE */ | |
| 602 | #define PHY_CONTROL 0x00 /* Control Register */ | |
| 489815ce | 603 | #define PHY_STATUS 0x01 /* Status Register */ |
| bc7f75fa AK |
604 | #define PHY_ID1 0x02 /* Phy Id Reg (word 1) */ |
| 605 | #define PHY_ID2 0x03 /* Phy Id Reg (word 2) */ | |
| 606 | #define PHY_AUTONEG_ADV 0x04 /* Autoneg Advertisement */ | |
| 607 | #define PHY_LP_ABILITY 0x05 /* Link Partner Ability (Base Page) */ | |
| 7c25769f | 608 | #define PHY_AUTONEG_EXP 0x06 /* Autoneg Expansion Reg */ |
| bc7f75fa AK |
609 | #define PHY_1000T_CTRL 0x09 /* 1000Base-T Control Reg */ |
| 610 | #define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */ | |
| 7c25769f | 611 | #define PHY_EXT_STATUS 0x0F /* Extended Status Reg */ |
| bc7f75fa | 612 | |
| e65fa87c BA |
613 | #define PHY_CONTROL_LB 0x4000 /* PHY Loopback bit */ |
| 614 | ||
| bc7f75fa AK |
615 | /* NVM Control */ |
| 616 | #define E1000_EECD_SK 0x00000001 /* NVM Clock */ | |
| 617 | #define E1000_EECD_CS 0x00000002 /* NVM Chip Select */ | |
| 618 | #define E1000_EECD_DI 0x00000004 /* NVM Data In */ | |
| 619 | #define E1000_EECD_DO 0x00000008 /* NVM Data Out */ | |
| 620 | #define E1000_EECD_REQ 0x00000040 /* NVM Access Request */ | |
| 621 | #define E1000_EECD_GNT 0x00000080 /* NVM Access Grant */ | |
| f4187b56 | 622 | #define E1000_EECD_PRES 0x00000100 /* NVM Present */ |
| bc7f75fa | 623 | #define E1000_EECD_SIZE 0x00000200 /* NVM Size (0=64 word 1=256 word) */ |
| ad68076e BA |
624 | /* NVM Addressing bits based on type (0-small, 1-large) */ |
| 625 | #define E1000_EECD_ADDR_BITS 0x00000400 | |
| bc7f75fa AK |
626 | #define E1000_NVM_GRANT_ATTEMPTS 1000 /* NVM # attempts to gain grant */ |
| 627 | #define E1000_EECD_AUTO_RD 0x00000200 /* NVM Auto Read done */ | |
| 628 | #define E1000_EECD_SIZE_EX_MASK 0x00007800 /* NVM Size */ | |
| 629 | #define E1000_EECD_SIZE_EX_SHIFT 11 | |
| 630 | #define E1000_EECD_FLUPD 0x00080000 /* Update FLASH */ | |
| 631 | #define E1000_EECD_AUPDEN 0x00100000 /* Enable Autonomous FLASH update */ | |
| 632 | #define E1000_EECD_SEC1VAL 0x00400000 /* Sector One Valid */ | |
| e243455d | 633 | #define E1000_EECD_SEC1VAL_VALID_MASK (E1000_EECD_AUTO_RD | E1000_EECD_PRES) |
| bc7f75fa AK |
634 | |
| 635 | #define E1000_NVM_RW_REG_DATA 16 /* Offset to data in NVM read/write registers */ | |
| 636 | #define E1000_NVM_RW_REG_DONE 2 /* Offset to READ/WRITE done bit */ | |
| 637 | #define E1000_NVM_RW_REG_START 1 /* Start operation */ | |
| 638 | #define E1000_NVM_RW_ADDR_SHIFT 2 /* Shift to the address bits */ | |
| 639 | #define E1000_NVM_POLL_WRITE 1 /* Flag for polling for write complete */ | |
| 640 | #define E1000_NVM_POLL_READ 0 /* Flag for polling for read complete */ | |
| 641 | #define E1000_FLASH_UPDATES 2000 | |
| 642 | ||
| 643 | /* NVM Word Offsets */ | |
| 1aef70ef | 644 | #define NVM_COMPAT 0x0003 |
| bc7f75fa AK |
645 | #define NVM_ID_LED_SETTINGS 0x0004 |
| 646 | #define NVM_INIT_CONTROL2_REG 0x000F | |
| 647 | #define NVM_INIT_CONTROL3_PORT_B 0x0014 | |
| 648 | #define NVM_INIT_3GIO_3 0x001A | |
| 649 | #define NVM_INIT_CONTROL3_PORT_A 0x0024 | |
| 650 | #define NVM_CFG 0x0012 | |
| 93ca1610 | 651 | #define NVM_ALT_MAC_ADDR_PTR 0x0037 |
| bc7f75fa AK |
652 | #define NVM_CHECKSUM_REG 0x003F |
| 653 | ||
| a65a4a0d BA |
654 | #define E1000_NVM_INIT_CTRL2_MNGM 0x6000 /* Manageability Operation Mode mask */ |
| 655 | ||
| bc7f75fa AK |
656 | #define E1000_NVM_CFG_DONE_PORT_0 0x40000 /* MNG config cycle done */ |
| 657 | #define E1000_NVM_CFG_DONE_PORT_1 0x80000 /* ...for second port */ | |
| 658 | ||
| 659 | /* Mask bits for fields in Word 0x0f of the NVM */ | |
| 660 | #define NVM_WORD0F_PAUSE_MASK 0x3000 | |
| 661 | #define NVM_WORD0F_PAUSE 0x1000 | |
| 662 | #define NVM_WORD0F_ASM_DIR 0x2000 | |
| 663 | ||
| 664 | /* Mask bits for fields in Word 0x1a of the NVM */ | |
| 665 | #define NVM_WORD1A_ASPM_MASK 0x000C | |
| 666 | ||
| 1aef70ef BA |
667 | /* Mask bits for fields in Word 0x03 of the EEPROM */ |
| 668 | #define NVM_COMPAT_LOM 0x0800 | |
| 669 | ||
| 073287c0 BA |
670 | /* length of string needed to store PBA number */ |
| 671 | #define E1000_PBANUM_LENGTH 11 | |
| 672 | ||
| bc7f75fa AK |
673 | /* For checksumming, the sum of all words in the NVM should equal 0xBABA. */ |
| 674 | #define NVM_SUM 0xBABA | |
| 675 | ||
| 676 | /* PBA (printed board assembly) number words */ | |
| 677 | #define NVM_PBA_OFFSET_0 8 | |
| 678 | #define NVM_PBA_OFFSET_1 9 | |
| 073287c0 | 679 | #define NVM_PBA_PTR_GUARD 0xFAFA |
| bc7f75fa AK |
680 | #define NVM_WORD_SIZE_BASE_SHIFT 6 |
| 681 | ||
| 682 | /* NVM Commands - SPI */ | |
| 683 | #define NVM_MAX_RETRY_SPI 5000 /* Max wait of 5ms, for RDY signal */ | |
| 684 | #define NVM_READ_OPCODE_SPI 0x03 /* NVM read opcode */ | |
| 685 | #define NVM_WRITE_OPCODE_SPI 0x02 /* NVM write opcode */ | |
| 686 | #define NVM_A8_OPCODE_SPI 0x08 /* opcode bit-3 = address bit-8 */ | |
| 687 | #define NVM_WREN_OPCODE_SPI 0x06 /* NVM set Write Enable latch */ | |
| 688 | #define NVM_RDSR_OPCODE_SPI 0x05 /* NVM read Status register */ | |
| 689 | ||
| 690 | /* SPI NVM Status Register */ | |
| 691 | #define NVM_STATUS_RDY_SPI 0x01 | |
| 692 | ||
| 693 | /* Word definitions for ID LED Settings */ | |
| 694 | #define ID_LED_RESERVED_0000 0x0000 | |
| 695 | #define ID_LED_RESERVED_FFFF 0xFFFF | |
| 696 | #define ID_LED_DEFAULT ((ID_LED_OFF1_ON2 << 12) | \ | |
| 697 | (ID_LED_OFF1_OFF2 << 8) | \ | |
| 698 | (ID_LED_DEF1_DEF2 << 4) | \ | |
| 699 | (ID_LED_DEF1_DEF2)) | |
| 700 | #define ID_LED_DEF1_DEF2 0x1 | |
| 701 | #define ID_LED_DEF1_ON2 0x2 | |
| 702 | #define ID_LED_DEF1_OFF2 0x3 | |
| 703 | #define ID_LED_ON1_DEF2 0x4 | |
| 704 | #define ID_LED_ON1_ON2 0x5 | |
| 705 | #define ID_LED_ON1_OFF2 0x6 | |
| 706 | #define ID_LED_OFF1_DEF2 0x7 | |
| 707 | #define ID_LED_OFF1_ON2 0x8 | |
| 708 | #define ID_LED_OFF1_OFF2 0x9 | |
| 709 | ||
| 710 | #define IGP_ACTIVITY_LED_MASK 0xFFFFF0FF | |
| 711 | #define IGP_ACTIVITY_LED_ENABLE 0x0300 | |
| 712 | #define IGP_LED3_MODE 0x07000000 | |
| 713 | ||
| 714 | /* PCI/PCI-X/PCI-EX Config space */ | |
| 715 | #define PCI_HEADER_TYPE_REGISTER 0x0E | |
| 716 | #define PCIE_LINK_STATUS 0x12 | |
| 717 | ||
| 718 | #define PCI_HEADER_TYPE_MULTIFUNC 0x80 | |
| 719 | #define PCIE_LINK_WIDTH_MASK 0x3F0 | |
| 720 | #define PCIE_LINK_WIDTH_SHIFT 4 | |
| 721 | ||
| 722 | #define PHY_REVISION_MASK 0xFFFFFFF0 | |
| 723 | #define MAX_PHY_REG_ADDRESS 0x1F /* 5 bit address bus (0-0x1F) */ | |
| 724 | #define MAX_PHY_MULTI_PAGE_REG 0xF | |
| 725 | ||
| 726 | /* Bit definitions for valid PHY IDs. */ | |
| ad68076e BA |
727 | /* |
| 728 | * I = Integrated | |
| bc7f75fa AK |
729 | * E = External |
| 730 | */ | |
| 731 | #define M88E1000_E_PHY_ID 0x01410C50 | |
| 732 | #define M88E1000_I_PHY_ID 0x01410C30 | |
| 733 | #define M88E1011_I_PHY_ID 0x01410C20 | |
| 734 | #define IGP01E1000_I_PHY_ID 0x02A80380 | |
| 735 | #define M88E1111_I_PHY_ID 0x01410CC0 | |
| 736 | #define GG82563_E_PHY_ID 0x01410CA0 | |
| 737 | #define IGP03E1000_E_PHY_ID 0x02A80390 | |
| 738 | #define IFE_E_PHY_ID 0x02A80330 | |
| 739 | #define IFE_PLUS_E_PHY_ID 0x02A80320 | |
| 740 | #define IFE_C_E_PHY_ID 0x02A80310 | |
| 97ac8cae BA |
741 | #define BME1000_E_PHY_ID 0x01410CB0 |
| 742 | #define BME1000_E_PHY_ID_R2 0x01410CB1 | |
| a4f58f54 BA |
743 | #define I82577_E_PHY_ID 0x01540050 |
| 744 | #define I82578_E_PHY_ID 0x004DD040 | |
| d3738bb8 | 745 | #define I82579_E_PHY_ID 0x01540090 |
| 2fbe4526 | 746 | #define I217_E_PHY_ID 0x015400A0 |
| bc7f75fa AK |
747 | |
| 748 | /* M88E1000 Specific Registers */ | |
| 749 | #define M88E1000_PHY_SPEC_CTRL 0x10 /* PHY Specific Control Register */ | |
| 750 | #define M88E1000_PHY_SPEC_STATUS 0x11 /* PHY Specific Status Register */ | |
| 751 | #define M88E1000_EXT_PHY_SPEC_CTRL 0x14 /* Extended PHY Specific Control */ | |
| 752 | ||
| 753 | #define M88E1000_PHY_PAGE_SELECT 0x1D /* Reg 29 for page number setting */ | |
| 754 | #define M88E1000_PHY_GEN_CONTROL 0x1E /* Its meaning depends on reg 29 */ | |
| 755 | ||
| 756 | /* M88E1000 PHY Specific Control Register */ | |
| 757 | #define M88E1000_PSCR_POLARITY_REVERSAL 0x0002 /* 1=Polarity Reversal enabled */ | |
| 758 | #define M88E1000_PSCR_MDI_MANUAL_MODE 0x0000 /* MDI Crossover Mode bits 6:5 */ | |
| 759 | /* Manual MDI configuration */ | |
| 760 | #define M88E1000_PSCR_MDIX_MANUAL_MODE 0x0020 /* Manual MDIX configuration */ | |
| ad68076e BA |
761 | /* 1000BASE-T: Auto crossover, 100BASE-TX/10BASE-T: MDI Mode */ |
| 762 | #define M88E1000_PSCR_AUTO_X_1000T 0x0040 | |
| 763 | /* Auto crossover enabled all speeds */ | |
| 764 | #define M88E1000_PSCR_AUTO_X_MODE 0x0060 | |
| 765 | /* | |
| 766 | * 1=Enable Extended 10BASE-T distance (Lower 10BASE-T Rx Threshold) | |
| 767 | * 0=Normal 10BASE-T Rx Threshold | |
| 768 | */ | |
| 769 | #define M88E1000_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Transmit */ | |
| bc7f75fa AK |
770 | |
| 771 | /* M88E1000 PHY Specific Status Register */ | |
| 772 | #define M88E1000_PSSR_REV_POLARITY 0x0002 /* 1=Polarity reversed */ | |
| 773 | #define M88E1000_PSSR_DOWNSHIFT 0x0020 /* 1=Downshifted */ | |
| 774 | #define M88E1000_PSSR_MDIX 0x0040 /* 1=MDIX; 0=MDI */ | |
| ad68076e BA |
775 | /* 0=<50M; 1=50-80M; 2=80-110M; 3=110-140M; 4=>140M */ |
| 776 | #define M88E1000_PSSR_CABLE_LENGTH 0x0380 | |
| bc7f75fa AK |
777 | #define M88E1000_PSSR_SPEED 0xC000 /* Speed, bits 14:15 */ |
| 778 | #define M88E1000_PSSR_1000MBS 0x8000 /* 10=1000Mbs */ | |
| 779 | ||
| 780 | #define M88E1000_PSSR_CABLE_LENGTH_SHIFT 7 | |
| 781 | ||
| ad68076e BA |
782 | /* |
| 783 | * Number of times we will attempt to autonegotiate before downshifting if we | |
| 784 | * are the master | |
| 785 | */ | |
| bc7f75fa AK |
786 | #define M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK 0x0C00 |
| 787 | #define M88E1000_EPSCR_MASTER_DOWNSHIFT_1X 0x0000 | |
| ad68076e BA |
788 | /* |
| 789 | * Number of times we will attempt to autonegotiate before downshifting if we | |
| 790 | * are the slave | |
| 791 | */ | |
| bc7f75fa AK |
792 | #define M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK 0x0300 |
| 793 | #define M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X 0x0100 | |
| 794 | #define M88E1000_EPSCR_TX_CLK_25 0x0070 /* 25 MHz TX_CLK */ | |
| 795 | ||
| 796 | /* M88EC018 Rev 2 specific DownShift settings */ | |
| 797 | #define M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK 0x0E00 | |
| 798 | #define M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X 0x0800 | |
| 799 | ||
| a4f58f54 BA |
800 | #define I82578_EPSCR_DOWNSHIFT_ENABLE 0x0020 |
| 801 | #define I82578_EPSCR_DOWNSHIFT_COUNTER_MASK 0x001C | |
| 802 | ||
| 97ac8cae BA |
803 | /* BME1000 PHY Specific Control Register */ |
| 804 | #define BME1000_PSCR_ENABLE_DOWNSHIFT 0x0800 /* 1 = enable downshift */ | |
| 805 | ||
| 806 | ||
| 807 | #define PHY_PAGE_SHIFT 5 | |
| 808 | #define PHY_REG(page, reg) (((page) << PHY_PAGE_SHIFT) | \ | |
| 809 | ((reg) & MAX_PHY_REG_ADDRESS)) | |
| 810 | ||
| ad68076e BA |
811 | /* |
| 812 | * Bits... | |
| bc7f75fa AK |
813 | * 15-5: page |
| 814 | * 4-0: register offset | |
| 815 | */ | |
| 816 | #define GG82563_PAGE_SHIFT 5 | |
| 817 | #define GG82563_REG(page, reg) \ | |
| 818 | (((page) << GG82563_PAGE_SHIFT) | ((reg) & MAX_PHY_REG_ADDRESS)) | |
| 819 | #define GG82563_MIN_ALT_REG 30 | |
| 820 | ||
| 821 | /* GG82563 Specific Registers */ | |
| 822 | #define GG82563_PHY_SPEC_CTRL \ | |
| 823 | GG82563_REG(0, 16) /* PHY Specific Control */ | |
| 824 | #define GG82563_PHY_PAGE_SELECT \ | |
| 825 | GG82563_REG(0, 22) /* Page Select */ | |
| 826 | #define GG82563_PHY_SPEC_CTRL_2 \ | |
| 827 | GG82563_REG(0, 26) /* PHY Specific Control 2 */ | |
| 828 | #define GG82563_PHY_PAGE_SELECT_ALT \ | |
| 829 | GG82563_REG(0, 29) /* Alternate Page Select */ | |
| 830 | ||
| 831 | #define GG82563_PHY_MAC_SPEC_CTRL \ | |
| 832 | GG82563_REG(2, 21) /* MAC Specific Control Register */ | |
| 833 | ||
| 834 | #define GG82563_PHY_DSP_DISTANCE \ | |
| 835 | GG82563_REG(5, 26) /* DSP Distance */ | |
| 836 | ||
| 837 | /* Page 193 - Port Control Registers */ | |
| 838 | #define GG82563_PHY_KMRN_MODE_CTRL \ | |
| 839 | GG82563_REG(193, 16) /* Kumeran Mode Control */ | |
| 840 | #define GG82563_PHY_PWR_MGMT_CTRL \ | |
| 841 | GG82563_REG(193, 20) /* Power Management Control */ | |
| 842 | ||
| 843 | /* Page 194 - KMRN Registers */ | |
| 844 | #define GG82563_PHY_INBAND_CTRL \ | |
| 845 | GG82563_REG(194, 18) /* Inband Control */ | |
| 846 | ||
| 847 | /* MDI Control */ | |
| 848 | #define E1000_MDIC_REG_SHIFT 16 | |
| 849 | #define E1000_MDIC_PHY_SHIFT 21 | |
| 850 | #define E1000_MDIC_OP_WRITE 0x04000000 | |
| 851 | #define E1000_MDIC_OP_READ 0x08000000 | |
| 852 | #define E1000_MDIC_READY 0x10000000 | |
| 853 | #define E1000_MDIC_ERROR 0x40000000 | |
| 854 | ||
| 855 | /* SerDes Control */ | |
| 856 | #define E1000_GEN_POLL_TIMEOUT 640 | |
| 857 | ||
| 2fbe4526 BA |
858 | /* FW Semaphore */ |
| 859 | #define E1000_FWSM_WLOCK_MAC_MASK 0x0380 | |
| 860 | #define E1000_FWSM_WLOCK_MAC_SHIFT 7 | |
| 861 | ||
| bc7f75fa | 862 | #endif /* _E1000_DEFINES_H_ */ |