projects / GitHub / mt8127 / android_kernel_alcatel_ttab.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
net: remove NET_RX_BAD and NET_RX_CN* defines
[GitHub/mt8127/android_kernel_alcatel_ttab.git] / drivers / net / at1700.c
CommitLineData
1da177e4
LT		 1/* at1700.c: A network device driver for the Allied Telesis AT1700.
2
3 Written 1993-98 by Donald Becker.
4
5 Copyright 1993 United States Government as represented by the
6 Director, National Security Agency.
7
8 This software may be used and distributed according to the terms
9 of the GNU General Public License, incorporated herein by reference.
10
11 The author may be reached as becker@scyld.com, or C/O
12 Scyld Computing Corporation
13 410 Severn Ave., Suite 210
14 Annapolis MD 21403
15
16 This is a device driver for the Allied Telesis AT1700, and
17 Fujitsu FMV-181/182/181A/182A/183/184/183A/184A, which are
18 straight-forward Fujitsu MB86965 implementations.
19
20 Modification for Fujitsu FMV-18X cards is done by Yutaka Tamiya
6aa20a22 21 (tamy@flab.fujitsu.co.jp).
1da177e4
LT		 22
23 Sources:
24 The Fujitsu MB86965 datasheet.
25
26 After the initial version of this driver was written Gerry Sawkins of
27 ATI provided their EEPROM configuration code header file.
28 Thanks to NIIBE Yutaka <gniibe@mri.co.jp> for bug fixes.
29
30 MCA bus (AT1720) support by Rene Schmit <rene@bss.lu>
31
32 Bugs:
33 The MB86965 has a design flaw that makes all probes unreliable. Not
34 only is it difficult to detect, it also moves around in I/O space in
35 response to inb()s from other device probes!
36*/
1da177e4 37
1da177e4
LT		 38#include <linux/errno.h>
39#include <linux/netdevice.h>
40#include <linux/etherdevice.h>
41#include <linux/mca-legacy.h>
42#include <linux/module.h>
43#include <linux/kernel.h>
44#include <linux/types.h>
45#include <linux/fcntl.h>
46#include <linux/interrupt.h>
47#include <linux/ioport.h>
48#include <linux/in.h>
49#include <linux/skbuff.h>
50#include <linux/slab.h>
51#include <linux/string.h>
52#include <linux/init.h>
53#include <linux/crc32.h>
54#include <linux/bitops.h>
55
56#include <asm/system.h>
57#include <asm/io.h>
58#include <asm/dma.h>
59
60static char version[] __initdata =
d5b20697 61 "at1700.c:v1.16 9/11/06 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n";
1da177e4
LT		 62
63#define DRV_NAME "at1700"
64
65/* Tunable parameters. */
66
67/* When to switch from the 64-entry multicast filter to Rx-all-multicast. */
68#define MC_FILTERBREAK 64
69
70/* These unusual address orders are used to verify the CONFIG register. */
71
72static int fmv18x_probe_list[] __initdata = {
73 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x300, 0x340, 0
74};
75
76/*
77 * ISA
78 */
79
80static unsigned at1700_probe_list[] __initdata = {
81 0x260, 0x280, 0x2a0, 0x240, 0x340, 0x320, 0x380, 0x300, 0
82};
83
84/*
85 * MCA
86 */
87#ifdef CONFIG_MCA_LEGACY
88static int at1700_ioaddr_pattern[] __initdata = {
89 0x00, 0x04, 0x01, 0x05, 0x02, 0x06, 0x03, 0x07
90};
91
92static int at1700_mca_probe_list[] __initdata = {
93 0x400, 0x1400, 0x2400, 0x3400, 0x4400, 0x5400, 0x6400, 0x7400, 0
94};
95
96static int at1700_irq_pattern[] __initdata = {
97 0x00, 0x00, 0x00, 0x30, 0x70, 0xb0, 0x00, 0x00,
98 0x00, 0xf0, 0x34, 0x74, 0xb4, 0x00, 0x00, 0xf4, 0x00
99};
100#endif
101
102/* use 0 for production, 1 for verification, >2 for debug */
103#ifndef NET_DEBUG
104#define NET_DEBUG 1
105#endif
106static unsigned int net_debug = NET_DEBUG;
107
108typedef unsigned char uchar;
109
110/* Information that need to be kept for each board. */
111struct net_local {
1da177e4
LT		 112 spinlock_t lock;
113 unsigned char mc_filter[8];
114 uint jumpered:1; /* Set iff the board has jumper config. */
115 uint tx_started:1; /* Packets are on the Tx queue. */
116 uint tx_queue_ready:1; /* Tx queue is ready to be sent. */
117 uint rx_started:1; /* Packets are Rxing. */
118 uchar tx_queue; /* Number of packet on the Tx queue. */
119 char mca_slot; /* -1 means ISA */
120 ushort tx_queue_len; /* Current length of the Tx queue. */
121};
122
123
124/* Offsets from the base address. */
125#define STATUS 0
126#define TX_STATUS 0
127#define RX_STATUS 1
128#define TX_INTR 2 /* Bit-mapped interrupt enable registers. */
129#define RX_INTR 3
130#define TX_MODE 4
131#define RX_MODE 5
132#define CONFIG_0 6 /* Misc. configuration settings. */
133#define CONFIG_1 7
134/* Run-time register bank 2 definitions. */
135#define DATAPORT 8 /* Word-wide DMA or programmed-I/O dataport. */
136#define TX_START 10
137#define COL16CNTL 11 /* Controll Reg for 16 collisions */
138#define MODE13 13
139#define RX_CTRL 14
140/* Configuration registers only on the '865A/B chips. */
141#define EEPROM_Ctrl 16
142#define EEPROM_Data 17
143#define CARDSTATUS 16 /* FMV-18x Card Status */
144#define CARDSTATUS1 17 /* FMV-18x Card Status */
145#define IOCONFIG 18 /* Either read the jumper, or move the I/O. */
146#define IOCONFIG1 19
147#define SAPROM 20 /* The station address PROM, if no EEPROM. */
148#define MODE24 24
149#define RESET 31 /* Write to reset some parts of the chip. */
150#define AT1700_IO_EXTENT 32
151#define PORT_OFFSET(o) (o)
152
153
154#define TX_TIMEOUT 10
155
156
157/* Index to functions, as function prototypes. */
158
159static int at1700_probe1(struct net_device *dev, int ioaddr);
160static int read_eeprom(long ioaddr, int location);
161static int net_open(struct net_device *dev);
162static int net_send_packet(struct sk_buff *skb, struct net_device *dev);
7d12e780 163static irqreturn_t net_interrupt(int irq, void *dev_id);
1da177e4
LT		 164static void net_rx(struct net_device *dev);
165static int net_close(struct net_device *dev);
1da177e4
LT		 166static void set_rx_mode(struct net_device *dev);
167static void net_tx_timeout (struct net_device *dev);
168
6aa20a22 169
1da177e4
LT		 170#ifdef CONFIG_MCA_LEGACY
171struct at1720_mca_adapters_struct {
172 char* name;
173 int id;
174};
175/* rEnE : maybe there are others I don't know off... */
176
177static struct at1720_mca_adapters_struct at1720_mca_adapters[] __initdata = {
178 { "Allied Telesys AT1720AT", 0x6410 },
179 { "Allied Telesys AT1720BT", 0x6413 },
180 { "Allied Telesys AT1720T", 0x6416 },
181 { NULL, 0 },
182};
183#endif
184
185/* Check for a network adaptor of this type, and return '0' iff one exists.
186 If dev->base_addr == 0, probe all likely locations.
187 If dev->base_addr == 1, always return failure.
188 If dev->base_addr == 2, allocate space for the device and return success
189 (detachable devices only).
190 */
191
192static int io = 0x260;
193
194static int irq;
195
196static void cleanup_card(struct net_device *dev)
197{
198#ifdef CONFIG_MCA_LEGACY
199 struct net_local *lp = netdev_priv(dev);
200 if (lp->mca_slot >= 0)
201 mca_mark_as_unused(lp->mca_slot);
6aa20a22 202#endif
1da177e4
LT		 203 free_irq(dev->irq, NULL);
204 release_region(dev->base_addr, AT1700_IO_EXTENT);
205}
206
207struct net_device * __init at1700_probe(int unit)
208{
209 struct net_device *dev = alloc_etherdev(sizeof(struct net_local));
210 unsigned *port;
211 int err = 0;
212
213 if (!dev)
214 return ERR_PTR(-ENODEV);
215
216 if (unit >= 0) {
217 sprintf(dev->name, "eth%d", unit);
218 netdev_boot_setup_check(dev);
219 io = dev->base_addr;
220 irq = dev->irq;
221 } else {
222 dev->base_addr = io;
223 dev->irq = irq;
224 }
225
1da177e4
LT		 226 if (io > 0x1ff) { /* Check a single specified location. */
227 err = at1700_probe1(dev, io);
228 } else if (io != 0) { /* Don't probe at all. */
229 err = -ENXIO;
230 } else {
231 for (port = at1700_probe_list; *port; port++) {
232 if (at1700_probe1(dev, *port) == 0)
233 break;
234 dev->irq = irq;
235 }
236 if (!*port)
237 err = -ENODEV;
238 }
239 if (err)
240 goto out;
241 err = register_netdev(dev);
242 if (err)
243 goto out1;
244 return dev;
245out1:
246 cleanup_card(dev);
247out:
248 free_netdev(dev);
249 return ERR_PTR(err);
250}
251
cb0c7005
SH		 252static const struct net_device_ops at1700_netdev_ops = {
253 .ndo_open = net_open,
254 .ndo_stop = net_close,
255 .ndo_start_xmit = net_send_packet,
256 .ndo_set_multicast_list = set_rx_mode,
257 .ndo_tx_timeout = net_tx_timeout,
258 .ndo_change_mtu = eth_change_mtu,
259 .ndo_set_mac_address = eth_mac_addr,
260 .ndo_validate_addr = eth_validate_addr,
261};
262
1da177e4
LT		 263/* The Fujitsu datasheet suggests that the NIC be probed for by checking its
264 "signature", the default bit pattern after a reset. This *doesn't* work --
265 there is no way to reset the bus interface without a complete power-cycle!
266
267 It turns out that ATI came to the same conclusion I did: the only thing
268 that can be done is checking a few bits and then diving right into an
269 EEPROM read. */
270
271static int __init at1700_probe1(struct net_device *dev, int ioaddr)
272{
273 char fmv_irqmap[4] = {3, 7, 10, 15};
274 char fmv_irqmap_pnp[8] = {3, 4, 5, 7, 9, 10, 11, 15};
275 char at1700_irqmap[8] = {3, 4, 5, 9, 10, 11, 14, 15};
276 unsigned int i, irq, is_fmv18x = 0, is_at1700 = 0;
277 int slot, ret = -ENODEV;
278 struct net_local *lp = netdev_priv(dev);
279
280 if (!request_region(ioaddr, AT1700_IO_EXTENT, DRV_NAME))
281 return -EBUSY;
282
283 /* Resetting the chip doesn't reset the ISA interface, so don't bother.
284 That means we have to be careful with the register values we probe
285 for.
286 */
287#ifdef notdef
288 printk("at1700 probe at %#x, eeprom is %4.4x %4.4x %4.4x ctrl %4.4x.\n",
289 ioaddr, read_eeprom(ioaddr, 4), read_eeprom(ioaddr, 5),
290 read_eeprom(ioaddr, 6), inw(ioaddr + EEPROM_Ctrl));
291#endif
292
293#ifdef CONFIG_MCA_LEGACY
294 /* rEnE (rene@bss.lu): got this from 3c509 driver source , adapted for AT1720 */
295
296 /* Based on Erik Nygren's (nygren@mit.edu) 3c529 patch, heavily
297 modified by Chris Beauregard (cpbeaure@csclub.uwaterloo.ca)
298 to support standard MCA probing. */
299
300 /* redone for multi-card detection by ZP Gu (zpg@castle.net) */
301 /* now works as a module */
302
303 if (MCA_bus) {
304 int j;
305 int l_i;
306 u_char pos3, pos4;
307
308 for (j = 0; at1720_mca_adapters[j].name != NULL; j ++) {
309 slot = 0;
310 while (slot != MCA_NOTFOUND) {
6aa20a22 311
1da177e4
LT		 312 slot = mca_find_unused_adapter( at1720_mca_adapters[j].id, slot );
313 if (slot == MCA_NOTFOUND) break;
314
315 /* if we get this far, an adapter has been detected and is
316 enabled */
317
318 pos3 = mca_read_stored_pos( slot, 3 );
319 pos4 = mca_read_stored_pos( slot, 4 );
320
321 for (l_i = 0; l_i < 0x09; l_i++)
322 if (( pos3 & 0x07) == at1700_ioaddr_pattern[l_i])
323 break;
324 ioaddr = at1700_mca_probe_list[l_i];
6aa20a22 325
1da177e4
LT		 326 for (irq = 0; irq < 0x10; irq++)
327 if (((((pos4>>4) & 0x0f) | (pos3 & 0xf0)) & 0xff) == at1700_irq_pattern[irq])
328 break;
329
330 /* probing for a card at a particular IO/IRQ */
331 if ((dev->irq && dev->irq != irq) ||
332 (dev->base_addr && dev->base_addr != ioaddr)) {
333 slot++; /* probing next slot */
334 continue;
335 }
336
337 dev->irq = irq;
6aa20a22 338
1da177e4
LT		 339 /* claim the slot */
340 mca_set_adapter_name( slot, at1720_mca_adapters[j].name );
341 mca_mark_as_used(slot);
342
343 goto found;
344 }
345 }
346 /* if we get here, we didn't find an MCA adapter - try ISA */
347 }
348#endif
349 slot = -1;
350 /* We must check for the EEPROM-config boards first, else accessing
351 IOCONFIG0 will move the board! */
352 if (at1700_probe_list[inb(ioaddr + IOCONFIG1) & 0x07] == ioaddr
353 && read_eeprom(ioaddr, 4) == 0x0000
354 && (read_eeprom(ioaddr, 5) & 0xff00) == 0xF400)
355 is_at1700 = 1;
356 else if (inb(ioaddr + SAPROM ) == 0x00
357 && inb(ioaddr + SAPROM + 1) == 0x00
358 && inb(ioaddr + SAPROM + 2) == 0x0e)
359 is_fmv18x = 1;
360 else {
361 goto err_out;
362 }
6aa20a22 363
1da177e4
LT		 364#ifdef CONFIG_MCA_LEGACY
365found:
366#endif
367
368 /* Reset the internal state machines. */
369 outb(0, ioaddr + RESET);
370
371 if (is_at1700) {
372 irq = at1700_irqmap[(read_eeprom(ioaddr, 12)&0x04)
373 | (read_eeprom(ioaddr, 0)>>14)];
374 } else {
375 /* Check PnP mode for FMV-183/184/183A/184A. */
376 /* This PnP routine is very poor. IO and IRQ should be known. */
377 if (inb(ioaddr + CARDSTATUS1) & 0x20) {
378 irq = dev->irq;
379 for (i = 0; i < 8; i++) {
380 if (irq == fmv_irqmap_pnp[i])
381 break;
382 }
383 if (i == 8) {
384 goto err_mca;
385 }
386 } else {
387 if (fmv18x_probe_list[inb(ioaddr + IOCONFIG) & 0x07] != ioaddr)
388 goto err_mca;
389 irq = fmv_irqmap[(inb(ioaddr + IOCONFIG)>>6) & 0x03];
390 }
391 }
392
393 printk("%s: %s found at %#3x, IRQ %d, address ", dev->name,
394 is_at1700 ? "AT1700" : "FMV-18X", ioaddr, irq);
395
396 dev->base_addr = ioaddr;
397 dev->irq = irq;
398
399 if (is_at1700) {
400 for(i = 0; i < 3; i++) {
401 unsigned short eeprom_val = read_eeprom(ioaddr, 4+i);
1da177e4
LT		 402 ((unsigned short *)dev->dev_addr)[i] = ntohs(eeprom_val);
403 }
404 } else {
405 for(i = 0; i < 6; i++) {
406 unsigned char val = inb(ioaddr + SAPROM + i);
1da177e4
LT		 407 dev->dev_addr[i] = val;
408 }
409 }
e174961c 410 printk("%pM", dev->dev_addr);
1da177e4
LT		 411
412 /* The EEPROM word 12 bit 0x0400 means use regular 100 ohm 10baseT signals,
413 rather than 150 ohm shielded twisted pair compensation.
414 0x0000 == auto-sense the interface
415 0x0800 == use TP interface
416 0x1800 == use coax interface
417 */
418 {
419 const char *porttype[] = {"auto-sense", "10baseT", "auto-sense", "10base2"};
420 if (is_at1700) {
421 ushort setup_value = read_eeprom(ioaddr, 12);
422 dev->if_port = setup_value >> 8;
423 } else {
424 ushort setup_value = inb(ioaddr + CARDSTATUS);
425 switch (setup_value & 0x07) {
426 case 0x01: /* 10base5 */
427 case 0x02: /* 10base2 */
428 dev->if_port = 0x18; break;
429 case 0x04: /* 10baseT */
430 dev->if_port = 0x08; break;
431 default: /* auto-sense */
432 dev->if_port = 0x00; break;
433 }
434 }
435 printk(" %s interface.\n", porttype[(dev->if_port>>3) & 3]);
436 }
437
438 /* Set the configuration register 0 to 32K 100ns. byte-wide memory, 16 bit
439 bus access, two 4K Tx queues, and disabled Tx and Rx. */
440 outb(0xda, ioaddr + CONFIG_0);
441
442 /* Set the station address in bank zero. */
443 outb(0x00, ioaddr + CONFIG_1);
444 for (i = 0; i < 6; i++)
445 outb(dev->dev_addr[i], ioaddr + PORT_OFFSET(8 + i));
446
447 /* Switch to bank 1 and set the multicast table to accept none. */
448 outb(0x04, ioaddr + CONFIG_1);
449 for (i = 0; i < 8; i++)
450 outb(0x00, ioaddr + PORT_OFFSET(8 + i));
451
452
453 /* Switch to bank 2 */
454 /* Lock our I/O address, and set manual processing mode for 16 collisions. */
455 outb(0x08, ioaddr + CONFIG_1);
456 outb(dev->if_port, ioaddr + MODE13);
457 outb(0x00, ioaddr + COL16CNTL);
458
459 if (net_debug)
460 printk(version);
461
cb0c7005 462 dev->netdev_ops = &at1700_netdev_ops;
1da177e4
LT		 463 dev->watchdog_timeo = TX_TIMEOUT;
464
465 spin_lock_init(&lp->lock);
466
467 lp->jumpered = is_fmv18x;
468 lp->mca_slot = slot;
469 /* Snarf the interrupt vector now. */
470 ret = request_irq(irq, &net_interrupt, 0, DRV_NAME, dev);
471 if (ret) {
cba0516d
JG		 472 printk(KERN_ERR "AT1700 at %#3x is unusable due to a "
473 "conflict on IRQ %d.\n",
474 ioaddr, irq);
1da177e4
LT		 475 goto err_mca;
476 }
477
478 return 0;
479
480err_mca:
481#ifdef CONFIG_MCA_LEGACY
482 if (slot >= 0)
483 mca_mark_as_unused(slot);
484#endif
485err_out:
486 release_region(ioaddr, AT1700_IO_EXTENT);
487 return ret;
488}
489
6aa20a22 490
1da177e4
LT		 491/* EEPROM_Ctrl bits. */
492#define EE_SHIFT_CLK 0x40 /* EEPROM shift clock, in reg. 16. */
493#define EE_CS 0x20 /* EEPROM chip select, in reg. 16. */
494#define EE_DATA_WRITE 0x80 /* EEPROM chip data in, in reg. 17. */
495#define EE_DATA_READ 0x80 /* EEPROM chip data out, in reg. 17. */
496
497/* The EEPROM commands include the alway-set leading bit. */
498#define EE_WRITE_CMD (5 << 6)
499#define EE_READ_CMD (6 << 6)
500#define EE_ERASE_CMD (7 << 6)
501
502static int __init read_eeprom(long ioaddr, int location)
503{
504 int i;
505 unsigned short retval = 0;
506 long ee_addr = ioaddr + EEPROM_Ctrl;
507 long ee_daddr = ioaddr + EEPROM_Data;
508 int read_cmd = location | EE_READ_CMD;
509
510 /* Shift the read command bits out. */
511 for (i = 9; i >= 0; i--) {
512 short dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0;
513 outb(EE_CS, ee_addr);
514 outb(dataval, ee_daddr);
515 outb(EE_CS | EE_SHIFT_CLK, ee_addr); /* EEPROM clock tick. */
516 }
517 outb(EE_DATA_WRITE, ee_daddr);
518 for (i = 16; i > 0; i--) {
519 outb(EE_CS, ee_addr);
520 outb(EE_CS | EE_SHIFT_CLK, ee_addr);
521 retval = (retval << 1) | ((inb(ee_daddr) & EE_DATA_READ) ? 1 : 0);
522 }
523
524 /* Terminate the EEPROM access. */
525 outb(EE_CS, ee_addr);
526 outb(EE_SHIFT_CLK, ee_addr);
527 outb(0, ee_addr);
528 return retval;
529}
530
6aa20a22 531
1da177e4
LT		 532
533static int net_open(struct net_device *dev)
534{
535 struct net_local *lp = netdev_priv(dev);
536 int ioaddr = dev->base_addr;
537
538 /* Set the configuration register 0 to 32K 100ns. byte-wide memory, 16 bit
539 bus access, and two 4K Tx queues. */
540 outb(0x5a, ioaddr + CONFIG_0);
541
542 /* Powerup, switch to register bank 2, and enable the Rx and Tx. */
543 outb(0xe8, ioaddr + CONFIG_1);
544
545 lp->tx_started = 0;
546 lp->tx_queue_ready = 1;
547 lp->rx_started = 0;
548 lp->tx_queue = 0;
549 lp->tx_queue_len = 0;
550
551 /* Turn on hardware Tx and Rx interrupts. */
552 outb(0x82, ioaddr + TX_INTR);
553 outb(0x81, ioaddr + RX_INTR);
554
555 /* Enable the IRQ on boards of fmv18x it is feasible. */
556 if (lp->jumpered) {
557 outb(0x80, ioaddr + IOCONFIG1);
558 }
559
560 netif_start_queue(dev);
561 return 0;
562}
563
564static void net_tx_timeout (struct net_device *dev)
565{
566 struct net_local *lp = netdev_priv(dev);
567 int ioaddr = dev->base_addr;
568
569 printk ("%s: transmit timed out with status %04x, %s?\n", dev->name,
570 inw (ioaddr + STATUS), inb (ioaddr + TX_STATUS) & 0x80
571 ? "IRQ conflict" : "network cable problem");
572 printk ("%s: timeout registers: %04x %04x %04x %04x %04x %04x %04x %04x.\n",
573 dev->name, inw(ioaddr + TX_STATUS), inw(ioaddr + TX_INTR), inw(ioaddr + TX_MODE),
574 inw(ioaddr + CONFIG_0), inw(ioaddr + DATAPORT), inw(ioaddr + TX_START),
575 inw(ioaddr + MODE13 - 1), inw(ioaddr + RX_CTRL));
09f75cd7 576 dev->stats.tx_errors++;
1da177e4
LT		 577 /* ToDo: We should try to restart the adaptor... */
578 outw(0xffff, ioaddr + MODE24);
579 outw (0xffff, ioaddr + TX_STATUS);
580 outb (0x5a, ioaddr + CONFIG_0);
581 outb (0xe8, ioaddr + CONFIG_1);
582 outw (0x8182, ioaddr + TX_INTR);
583 outb (0x00, ioaddr + TX_START);
584 outb (0x03, ioaddr + COL16CNTL);
585
586 dev->trans_start = jiffies;
587
588 lp->tx_started = 0;
589 lp->tx_queue_ready = 1;
590 lp->rx_started = 0;
591 lp->tx_queue = 0;
592 lp->tx_queue_len = 0;
593
594 netif_wake_queue(dev);
595}
596
597
598static int net_send_packet (struct sk_buff *skb, struct net_device *dev)
599{
600 struct net_local *lp = netdev_priv(dev);
601 int ioaddr = dev->base_addr;
602 short length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN;
603 short len = skb->len;
604 unsigned char *buf = skb->data;
605 static u8 pad[ETH_ZLEN];
606
607 netif_stop_queue (dev);
608
609 /* We may not start transmitting unless we finish transferring
610 a packet into the Tx queue. During executing the following
611 codes we possibly catch a Tx interrupt. Thus we flag off
612 tx_queue_ready, so that we prevent the interrupt routine
613 (net_interrupt) to start transmitting. */
614 lp->tx_queue_ready = 0;
615 {
616 outw (length, ioaddr + DATAPORT);
617 /* Packet data */
618 outsw (ioaddr + DATAPORT, buf, len >> 1);
619 /* Check for dribble byte */
620 if (len & 1) {
621 outw(skb->data[skb->len-1], ioaddr + DATAPORT);
622 len++;
623 }
624 /* Check for packet padding */
625 if (length != skb->len)
626 outsw(ioaddr + DATAPORT, pad, (length - len + 1) >> 1);
627
628 lp->tx_queue++;
629 lp->tx_queue_len += length + 2;
630 }
631 lp->tx_queue_ready = 1;
632
633 if (lp->tx_started == 0) {
634 /* If the Tx is idle, always trigger a transmit. */
635 outb (0x80 | lp->tx_queue, ioaddr + TX_START);
636 lp->tx_queue = 0;
637 lp->tx_queue_len = 0;
638 dev->trans_start = jiffies;
639 lp->tx_started = 1;
640 netif_start_queue (dev);
641 } else if (lp->tx_queue_len < 4096 - 1502)
642 /* Yes, there is room for one more packet. */
643 netif_start_queue (dev);
644 dev_kfree_skb (skb);
645
646 return 0;
647}
6aa20a22 648
1da177e4
LT		 649/* The typical workload of the driver:
650 Handle the network interface interrupts. */
7d12e780 651static irqreturn_t net_interrupt(int irq, void *dev_id)
1da177e4
LT		 652{
653 struct net_device *dev = dev_id;
654 struct net_local *lp;
655 int ioaddr, status;
656 int handled = 0;
657
658 if (dev == NULL) {
659 printk ("at1700_interrupt(): irq %d for unknown device.\n", irq);
660 return IRQ_NONE;
661 }
662
663 ioaddr = dev->base_addr;
664 lp = netdev_priv(dev);
6aa20a22 665
1da177e4 666 spin_lock (&lp->lock);
6aa20a22 667
1da177e4
LT		 668 status = inw(ioaddr + TX_STATUS);
669 outw(status, ioaddr + TX_STATUS);
670
671 if (net_debug > 4)
672 printk("%s: Interrupt with status %04x.\n", dev->name, status);
673 if (lp->rx_started == 0 &&
674 (status & 0xff00 || (inb(ioaddr + RX_MODE) & 0x40) == 0)) {
675 /* Got a packet(s).
676 We cannot execute net_rx more than once at the same time for
677 the same device. During executing net_rx, we possibly catch a
678 Tx interrupt. Thus we flag on rx_started, so that we prevent
679 the interrupt routine (net_interrupt) to dive into net_rx
680 again. */
681 handled = 1;
682 lp->rx_started = 1;
683 outb(0x00, ioaddr + RX_INTR); /* Disable RX intr. */
684 net_rx(dev);
685 outb(0x81, ioaddr + RX_INTR); /* Enable RX intr. */
686 lp->rx_started = 0;
687 }
688 if (status & 0x00ff) {
689 handled = 1;
690 if (status & 0x02) {
691 /* More than 16 collisions occurred */
692 if (net_debug > 4)
693 printk("%s: 16 Collision occur during Txing.\n", dev->name);
694 /* Cancel sending a packet. */
695 outb(0x03, ioaddr + COL16CNTL);
09f75cd7 696 dev->stats.collisions++;
1da177e4
LT		 697 }
698 if (status & 0x82) {
09f75cd7 699 dev->stats.tx_packets++;
1da177e4
LT		 700 /* The Tx queue has any packets and is not being
701 transferred a packet from the host, start
702 transmitting. */
703 if (lp->tx_queue && lp->tx_queue_ready) {
704 outb(0x80 | lp->tx_queue, ioaddr + TX_START);
705 lp->tx_queue = 0;
706 lp->tx_queue_len = 0;
707 dev->trans_start = jiffies;
708 netif_wake_queue (dev);
709 } else {
710 lp->tx_started = 0;
711 netif_wake_queue (dev);
712 }
713 }
714 }
715
716 spin_unlock (&lp->lock);
717 return IRQ_RETVAL(handled);
718}
719
720/* We have a good packet(s), get it/them out of the buffers. */
721static void
722net_rx(struct net_device *dev)
723{
1da177e4
LT		 724 int ioaddr = dev->base_addr;
725 int boguscount = 5;
726
727 while ((inb(ioaddr + RX_MODE) & 0x40) == 0) {
728 ushort status = inw(ioaddr + DATAPORT);
729 ushort pkt_len = inw(ioaddr + DATAPORT);
730
731 if (net_debug > 4)
732 printk("%s: Rxing packet mode %02x status %04x.\n",
733 dev->name, inb(ioaddr + RX_MODE), status);
734#ifndef final_version
735 if (status == 0) {
736 outb(0x05, ioaddr + RX_CTRL);
737 break;
738 }
739#endif
740
741 if ((status & 0xF0) != 0x20) { /* There was an error. */
09f75cd7
JG		 742 dev->stats.rx_errors++;
743 if (status & 0x08) dev->stats.rx_length_errors++;
744 if (status & 0x04) dev->stats.rx_frame_errors++;
745 if (status & 0x02) dev->stats.rx_crc_errors++;
746 if (status & 0x01) dev->stats.rx_over_errors++;
1da177e4
LT		 747 } else {
748 /* Malloc up new buffer. */
749 struct sk_buff *skb;
750
751 if (pkt_len > 1550) {
752 printk("%s: The AT1700 claimed a very large packet, size %d.\n",
753 dev->name, pkt_len);
754 /* Prime the FIFO and then flush the packet. */
755 inw(ioaddr + DATAPORT); inw(ioaddr + DATAPORT);
756 outb(0x05, ioaddr + RX_CTRL);
09f75cd7 757 dev->stats.rx_errors++;
1da177e4
LT		 758 break;
759 }
760 skb = dev_alloc_skb(pkt_len+3);
761 if (skb == NULL) {
762 printk("%s: Memory squeeze, dropping packet (len %d).\n",
763 dev->name, pkt_len);
764 /* Prime the FIFO and then flush the packet. */
765 inw(ioaddr + DATAPORT); inw(ioaddr + DATAPORT);
766 outb(0x05, ioaddr + RX_CTRL);
09f75cd7 767 dev->stats.rx_dropped++;
1da177e4
LT		 768 break;
769 }
1da177e4
LT		 770 skb_reserve(skb,2);
771
772 insw(ioaddr + DATAPORT, skb_put(skb,pkt_len), (pkt_len + 1) >> 1);
773 skb->protocol=eth_type_trans(skb, dev);
774 netif_rx(skb);
09f75cd7
JG		 775 dev->stats.rx_packets++;
776 dev->stats.rx_bytes += pkt_len;
1da177e4
LT		 777 }
778 if (--boguscount <= 0)
779 break;
780 }
781
782 /* If any worth-while packets have been received, dev_rint()
783 has done a mark_bh(NET_BH) for us and will work on them
784 when we get to the bottom-half routine. */
785 {
786 int i;
787 for (i = 0; i < 20; i++) {
788 if ((inb(ioaddr + RX_MODE) & 0x40) == 0x40)
789 break;
790 inw(ioaddr + DATAPORT); /* dummy status read */
791 outb(0x05, ioaddr + RX_CTRL);
792 }
793
794 if (net_debug > 5)
795 printk("%s: Exint Rx packet with mode %02x after %d ticks.\n",
796 dev->name, inb(ioaddr + RX_MODE), i);
797 }
798 return;
799}
800
801/* The inverse routine to net_open(). */
802static int net_close(struct net_device *dev)
803{
804 struct net_local *lp = netdev_priv(dev);
805 int ioaddr = dev->base_addr;
806
807 netif_stop_queue(dev);
808
809 /* Set configuration register 0 to disable Tx and Rx. */
810 outb(0xda, ioaddr + CONFIG_0);
811
812 /* No statistic counters on the chip to update. */
813
814 /* Disable the IRQ on boards of fmv18x where it is feasible. */
815 if (lp->jumpered) {
816 outb(0x00, ioaddr + IOCONFIG1);
817 free_irq(dev->irq, dev);
818 }
819
820 /* Power-down the chip. Green, green, green! */
821 outb(0x00, ioaddr + CONFIG_1);
822 return 0;
823}
824
1da177e4
LT		 825/*
826 Set the multicast/promiscuous mode for this adaptor.
827*/
828
829static void
830set_rx_mode(struct net_device *dev)
831{
832 int ioaddr = dev->base_addr;
833 struct net_local *lp = netdev_priv(dev);
834 unsigned char mc_filter[8]; /* Multicast hash filter */
835 unsigned long flags;
1da177e4
LT		 836
837 if (dev->flags & IFF_PROMISC) {
1da177e4
LT		 838 memset(mc_filter, 0xff, sizeof(mc_filter));
839 outb(3, ioaddr + RX_MODE); /* Enable promiscuous mode */
840 } else if (dev->mc_count > MC_FILTERBREAK
841 || (dev->flags & IFF_ALLMULTI)) {
842 /* Too many to filter perfectly -- accept all multicasts. */
843 memset(mc_filter, 0xff, sizeof(mc_filter));
844 outb(2, ioaddr + RX_MODE); /* Use normal mode. */
845 } else if (dev->mc_count == 0) {
846 memset(mc_filter, 0x00, sizeof(mc_filter));
847 outb(1, ioaddr + RX_MODE); /* Ignore almost all multicasts. */
848 } else {
849 struct dev_mc_list *mclist;
850 int i;
851
852 memset(mc_filter, 0, sizeof(mc_filter));
853 for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
854 i++, mclist = mclist->next) {
855 unsigned int bit =
856 ether_crc_le(ETH_ALEN, mclist->dmi_addr) >> 26;
857 mc_filter[bit >> 3] |= (1 << bit);
858 }
859 outb(0x02, ioaddr + RX_MODE); /* Use normal mode. */
860 }
861
862 spin_lock_irqsave (&lp->lock, flags);
863 if (memcmp(mc_filter, lp->mc_filter, sizeof(mc_filter))) {
1256f739 864 int i;
1da177e4
LT		 865 int saved_bank = inw(ioaddr + CONFIG_0);
866 /* Switch to bank 1 and set the multicast table. */
867 outw((saved_bank & ~0x0C00) | 0x0480, ioaddr + CONFIG_0);
868 for (i = 0; i < 8; i++)
869 outb(mc_filter[i], ioaddr + PORT_OFFSET(8 + i));
870 memcpy(lp->mc_filter, mc_filter, sizeof(mc_filter));
871 outw(saved_bank, ioaddr + CONFIG_0);
872 }
873 spin_unlock_irqrestore (&lp->lock, flags);
874 return;
875}
876
877#ifdef MODULE
878static struct net_device *dev_at1700;
879
880module_param(io, int, 0);
881module_param(irq, int, 0);
882module_param(net_debug, int, 0);
883MODULE_PARM_DESC(io, "AT1700/FMV18X I/O base address");
884MODULE_PARM_DESC(irq, "AT1700/FMV18X IRQ number");
885MODULE_PARM_DESC(net_debug, "AT1700/FMV18X debug level (0-6)");
886
5250f332 887static int __init at1700_module_init(void)
1da177e4
LT		 888{
889 if (io == 0)
890 printk("at1700: You should not use auto-probing with insmod!\n");
891 dev_at1700 = at1700_probe(-1);
892 if (IS_ERR(dev_at1700))
893 return PTR_ERR(dev_at1700);
894 return 0;
895}
896
5250f332 897static void __exit at1700_module_exit(void)
1da177e4
LT		 898{
899 unregister_netdev(dev_at1700);
900 cleanup_card(dev_at1700);
901 free_netdev(dev_at1700);
902}
5250f332
JS		 903module_init(at1700_module_init);
904module_exit(at1700_module_exit);
1da177e4
LT		 905#endif /* MODULE */
906MODULE_LICENSE("GPL");
kernel source for telekom puls (alcatel/mediatek)