Commit | Line | Data |
---|---|---|
0c33b27d CH |
1 | /* |
2 | * linux/drivers/message/fusion/mptsas.c | |
3 | * For use with LSI Logic PCI chip/adapter(s) | |
4 | * running LSI Logic Fusion MPT (Message Passing Technology) firmware. | |
5 | * | |
9f4203b3 | 6 | * Copyright (c) 1999-2007 LSI Logic Corporation |
16d20101 | 7 | * (mailto:DL-MPTFusionLinux@lsi.com) |
9f4203b3 | 8 | * Copyright (c) 2005-2007 Dell |
0c33b27d CH |
9 | */ |
10 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
11 | /* | |
12 | This program is free software; you can redistribute it and/or modify | |
13 | it under the terms of the GNU General Public License as published by | |
14 | the Free Software Foundation; version 2 of the License. | |
15 | ||
16 | This program is distributed in the hope that it will be useful, | |
17 | but WITHOUT ANY WARRANTY; without even the implied warranty of | |
18 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
19 | GNU General Public License for more details. | |
20 | ||
21 | NO WARRANTY | |
22 | THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR | |
23 | CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT | |
24 | LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, | |
25 | MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is | |
26 | solely responsible for determining the appropriateness of using and | |
27 | distributing the Program and assumes all risks associated with its | |
28 | exercise of rights under this Agreement, including but not limited to | |
29 | the risks and costs of program errors, damage to or loss of data, | |
30 | programs or equipment, and unavailability or interruption of operations. | |
31 | ||
32 | DISCLAIMER OF LIABILITY | |
33 | NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY | |
34 | DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
35 | DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND | |
36 | ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR | |
37 | TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE | |
38 | USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED | |
39 | HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES | |
40 | ||
41 | You should have received a copy of the GNU General Public License | |
42 | along with this program; if not, write to the Free Software | |
43 | Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
44 | */ | |
45 | /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ | |
46 | ||
47 | #include <linux/module.h> | |
48 | #include <linux/kernel.h> | |
49 | #include <linux/init.h> | |
50 | #include <linux/errno.h> | |
cd354f1a | 51 | #include <linux/jiffies.h> |
0c33b27d | 52 | #include <linux/workqueue.h> |
547f9a21 | 53 | #include <linux/delay.h> /* for mdelay */ |
0c33b27d | 54 | |
547f9a21 | 55 | #include <scsi/scsi.h> |
0c33b27d CH |
56 | #include <scsi/scsi_cmnd.h> |
57 | #include <scsi/scsi_device.h> | |
58 | #include <scsi/scsi_host.h> | |
59 | #include <scsi/scsi_transport_sas.h> | |
547f9a21 | 60 | #include <scsi/scsi_dbg.h> |
0c33b27d CH |
61 | |
62 | #include "mptbase.h" | |
63 | #include "mptscsih.h" | |
64 | ||
65 | ||
66 | #define my_NAME "Fusion MPT SAS Host driver" | |
67 | #define my_VERSION MPT_LINUX_VERSION_COMMON | |
68 | #define MYNAM "mptsas" | |
69 | ||
e8bf3941 JB |
70 | /* |
71 | * Reserved channel for integrated raid | |
72 | */ | |
73 | #define MPTSAS_RAID_CHANNEL 1 | |
74 | ||
0c33b27d CH |
75 | MODULE_AUTHOR(MODULEAUTHOR); |
76 | MODULE_DESCRIPTION(my_NAME); | |
77 | MODULE_LICENSE("GPL"); | |
9f4203b3 | 78 | MODULE_VERSION(my_VERSION); |
0c33b27d | 79 | |
0c33b27d CH |
80 | static int mpt_pt_clear; |
81 | module_param(mpt_pt_clear, int, 0); | |
82 | MODULE_PARM_DESC(mpt_pt_clear, | |
ba856d32 | 83 | " Clear persistency table: enable=1 " |
0c33b27d CH |
84 | "(default=MPTSCSIH_PT_CLEAR=0)"); |
85 | ||
793955f5 EM |
86 | /* scsi-mid layer global parmeter is max_report_luns, which is 511 */ |
87 | #define MPTSAS_MAX_LUN (16895) | |
88 | static int max_lun = MPTSAS_MAX_LUN; | |
89 | module_param(max_lun, int, 0); | |
90 | MODULE_PARM_DESC(max_lun, " max lun, default=16895 "); | |
91 | ||
0c33b27d CH |
92 | static int mptsasDoneCtx = -1; |
93 | static int mptsasTaskCtx = -1; | |
94 | static int mptsasInternalCtx = -1; /* Used only for internal commands */ | |
da4fa655 | 95 | static int mptsasMgmtCtx = -1; |
0c33b27d | 96 | |
b506ade9 | 97 | static void mptsas_hotplug_work(struct work_struct *work); |
0c33b27d | 98 | |
df9e062a EM |
99 | struct mptsas_target_reset_event { |
100 | struct list_head list; | |
101 | EVENT_DATA_SAS_DEVICE_STATUS_CHANGE sas_event_data; | |
102 | u8 target_reset_issued; | |
103 | }; | |
104 | ||
9a28f49a CH |
105 | enum mptsas_hotplug_action { |
106 | MPTSAS_ADD_DEVICE, | |
107 | MPTSAS_DEL_DEVICE, | |
c73787ee ME |
108 | MPTSAS_ADD_RAID, |
109 | MPTSAS_DEL_RAID, | |
b506ade9 | 110 | MPTSAS_ADD_INACTIVE_VOLUME, |
bd23e94c | 111 | MPTSAS_IGNORE_EVENT, |
9a28f49a CH |
112 | }; |
113 | ||
114 | struct mptsas_hotplug_event { | |
115 | struct work_struct work; | |
116 | MPT_ADAPTER *ioc; | |
117 | enum mptsas_hotplug_action event_type; | |
118 | u64 sas_address; | |
b506ade9 EM |
119 | u8 channel; |
120 | u8 id; | |
9a28f49a CH |
121 | u32 device_info; |
122 | u16 handle; | |
123 | u16 parent_handle; | |
124 | u8 phy_id; | |
b506ade9 EM |
125 | u8 phys_disk_num_valid; /* hrc (hidden raid component) */ |
126 | u8 phys_disk_num; /* hrc - unique index*/ | |
127 | u8 hidden_raid_component; /* hrc - don't expose*/ | |
9a28f49a CH |
128 | }; |
129 | ||
e6b2d76a ME |
130 | struct mptsas_discovery_event { |
131 | struct work_struct work; | |
132 | MPT_ADAPTER *ioc; | |
133 | }; | |
134 | ||
0c33b27d CH |
135 | /* |
136 | * SAS topology structures | |
137 | * | |
138 | * The MPT Fusion firmware interface spreads information about the | |
139 | * SAS topology over many manufacture pages, thus we need some data | |
140 | * structure to collect it and process it for the SAS transport class. | |
141 | */ | |
142 | ||
143 | struct mptsas_devinfo { | |
144 | u16 handle; /* unique id to address this device */ | |
c73787ee | 145 | u16 handle_parent; /* unique id to address parent device */ |
e3094447 CH |
146 | u16 handle_enclosure; /* enclosure identifier of the enclosure */ |
147 | u16 slot; /* physical slot in enclosure */ | |
0c33b27d CH |
148 | u8 phy_id; /* phy number of parent device */ |
149 | u8 port_id; /* sas physical port this device | |
150 | is assoc'd with */ | |
9a28f49a | 151 | u8 id; /* logical target id of this device */ |
b506ade9 | 152 | u32 phys_disk_num; /* phys disk id, for csmi-ioctls */ |
9a28f49a | 153 | u8 channel; /* logical bus number of this device */ |
0c33b27d CH |
154 | u64 sas_address; /* WWN of this device, |
155 | SATA is assigned by HBA,expander */ | |
156 | u32 device_info; /* bitfield detailed info about this device */ | |
157 | }; | |
158 | ||
547f9a21 EM |
159 | /* |
160 | * Specific details on ports, wide/narrow | |
161 | */ | |
162 | struct mptsas_portinfo_details{ | |
547f9a21 EM |
163 | u16 num_phys; /* number of phys belong to this port */ |
164 | u64 phy_bitmask; /* TODO, extend support for 255 phys */ | |
165 | struct sas_rphy *rphy; /* transport layer rphy object */ | |
166 | struct sas_port *port; /* transport layer port object */ | |
167 | struct scsi_target *starget; | |
168 | struct mptsas_portinfo *port_info; | |
169 | }; | |
170 | ||
0c33b27d | 171 | struct mptsas_phyinfo { |
2ecce492 | 172 | u16 handle; /* unique id to address this */ |
0c33b27d | 173 | u8 phy_id; /* phy index */ |
547f9a21 | 174 | u8 port_id; /* firmware port identifier */ |
0c33b27d CH |
175 | u8 negotiated_link_rate; /* nego'd link rate for this phy */ |
176 | u8 hw_link_rate; /* hardware max/min phys link rate */ | |
177 | u8 programmed_link_rate; /* programmed max/min phy link rate */ | |
547f9a21 | 178 | u8 sas_port_add_phy; /* flag to request sas_port_add_phy*/ |
0c33b27d CH |
179 | struct mptsas_devinfo identify; /* point to phy device info */ |
180 | struct mptsas_devinfo attached; /* point to attached device info */ | |
547f9a21 EM |
181 | struct sas_phy *phy; /* transport layer phy object */ |
182 | struct mptsas_portinfo *portinfo; | |
183 | struct mptsas_portinfo_details * port_details; | |
0c33b27d CH |
184 | }; |
185 | ||
186 | struct mptsas_portinfo { | |
187 | struct list_head list; | |
547f9a21 | 188 | u16 num_phys; /* number of phys */ |
0c33b27d CH |
189 | struct mptsas_phyinfo *phy_info; |
190 | }; | |
191 | ||
e3094447 CH |
192 | struct mptsas_enclosure { |
193 | u64 enclosure_logical_id; /* The WWN for the enclosure */ | |
194 | u16 enclosure_handle; /* unique id to address this */ | |
195 | u16 flags; /* details enclosure management */ | |
196 | u16 num_slot; /* num slots */ | |
197 | u16 start_slot; /* first slot */ | |
198 | u8 start_id; /* starting logical target id */ | |
199 | u8 start_channel; /* starting logical channel id */ | |
200 | u8 sep_id; /* SEP device logical target id */ | |
201 | u8 sep_channel; /* SEP channel logical channel id */ | |
202 | }; | |
203 | ||
547f9a21 | 204 | #ifdef MPT_DEBUG_SAS |
b5141128 CH |
205 | static void mptsas_print_phy_data(MPI_SAS_IO_UNIT0_PHY_DATA *phy_data) |
206 | { | |
207 | printk("---- IO UNIT PAGE 0 ------------\n"); | |
208 | printk("Handle=0x%X\n", | |
209 | le16_to_cpu(phy_data->AttachedDeviceHandle)); | |
210 | printk("Controller Handle=0x%X\n", | |
211 | le16_to_cpu(phy_data->ControllerDevHandle)); | |
212 | printk("Port=0x%X\n", phy_data->Port); | |
213 | printk("Port Flags=0x%X\n", phy_data->PortFlags); | |
214 | printk("PHY Flags=0x%X\n", phy_data->PhyFlags); | |
215 | printk("Negotiated Link Rate=0x%X\n", phy_data->NegotiatedLinkRate); | |
216 | printk("Controller PHY Device Info=0x%X\n", | |
217 | le32_to_cpu(phy_data->ControllerPhyDeviceInfo)); | |
218 | printk("DiscoveryStatus=0x%X\n", | |
219 | le32_to_cpu(phy_data->DiscoveryStatus)); | |
220 | printk("\n"); | |
221 | } | |
222 | ||
223 | static void mptsas_print_phy_pg0(SasPhyPage0_t *pg0) | |
224 | { | |
225 | __le64 sas_address; | |
226 | ||
227 | memcpy(&sas_address, &pg0->SASAddress, sizeof(__le64)); | |
228 | ||
229 | printk("---- SAS PHY PAGE 0 ------------\n"); | |
230 | printk("Attached Device Handle=0x%X\n", | |
231 | le16_to_cpu(pg0->AttachedDevHandle)); | |
232 | printk("SAS Address=0x%llX\n", | |
233 | (unsigned long long)le64_to_cpu(sas_address)); | |
234 | printk("Attached PHY Identifier=0x%X\n", pg0->AttachedPhyIdentifier); | |
235 | printk("Attached Device Info=0x%X\n", | |
236 | le32_to_cpu(pg0->AttachedDeviceInfo)); | |
237 | printk("Programmed Link Rate=0x%X\n", pg0->ProgrammedLinkRate); | |
238 | printk("Change Count=0x%X\n", pg0->ChangeCount); | |
239 | printk("PHY Info=0x%X\n", le32_to_cpu(pg0->PhyInfo)); | |
240 | printk("\n"); | |
241 | } | |
242 | ||
243 | static void mptsas_print_phy_pg1(SasPhyPage1_t *pg1) | |
244 | { | |
245 | printk("---- SAS PHY PAGE 1 ------------\n"); | |
f9a2d2e0 CH |
246 | printk("Invalid Dword Count=0x%x\n", pg1->InvalidDwordCount); |
247 | printk("Running Disparity Error Count=0x%x\n", | |
b5141128 | 248 | pg1->RunningDisparityErrorCount); |
f9a2d2e0 CH |
249 | printk("Loss Dword Synch Count=0x%x\n", pg1->LossDwordSynchCount); |
250 | printk("PHY Reset Problem Count=0x%x\n", pg1->PhyResetProblemCount); | |
251 | printk("\n"); | |
b5141128 CH |
252 | } |
253 | ||
254 | static void mptsas_print_device_pg0(SasDevicePage0_t *pg0) | |
255 | { | |
256 | __le64 sas_address; | |
257 | ||
258 | memcpy(&sas_address, &pg0->SASAddress, sizeof(__le64)); | |
259 | ||
260 | printk("---- SAS DEVICE PAGE 0 ---------\n"); | |
261 | printk("Handle=0x%X\n" ,le16_to_cpu(pg0->DevHandle)); | |
e3094447 | 262 | printk("Parent Handle=0x%X\n" ,le16_to_cpu(pg0->ParentDevHandle)); |
b5141128 CH |
263 | printk("Enclosure Handle=0x%X\n", le16_to_cpu(pg0->EnclosureHandle)); |
264 | printk("Slot=0x%X\n", le16_to_cpu(pg0->Slot)); | |
f99be43b EM |
265 | printk("SAS Address=0x%llX\n", (unsigned long long) |
266 | le64_to_cpu(sas_address)); | |
b5141128 CH |
267 | printk("Target ID=0x%X\n", pg0->TargetID); |
268 | printk("Bus=0x%X\n", pg0->Bus); | |
f9a2d2e0 CH |
269 | /* The PhyNum field specifies the PHY number of the parent |
270 | * device this device is linked to | |
271 | */ | |
272 | printk("Parent Phy Num=0x%X\n", pg0->PhyNum); | |
273 | printk("Access Status=0x%X\n", le16_to_cpu(pg0->AccessStatus)); | |
b5141128 CH |
274 | printk("Device Info=0x%X\n", le32_to_cpu(pg0->DeviceInfo)); |
275 | printk("Flags=0x%X\n", le16_to_cpu(pg0->Flags)); | |
276 | printk("Physical Port=0x%X\n", pg0->PhysicalPort); | |
277 | printk("\n"); | |
278 | } | |
279 | ||
280 | static void mptsas_print_expander_pg1(SasExpanderPage1_t *pg1) | |
281 | { | |
282 | printk("---- SAS EXPANDER PAGE 1 ------------\n"); | |
283 | ||
284 | printk("Physical Port=0x%X\n", pg1->PhysicalPort); | |
f9a2d2e0 | 285 | printk("PHY Identifier=0x%X\n", pg1->PhyIdentifier); |
b5141128 CH |
286 | printk("Negotiated Link Rate=0x%X\n", pg1->NegotiatedLinkRate); |
287 | printk("Programmed Link Rate=0x%X\n", pg1->ProgrammedLinkRate); | |
288 | printk("Hardware Link Rate=0x%X\n", pg1->HwLinkRate); | |
289 | printk("Owner Device Handle=0x%X\n", | |
290 | le16_to_cpu(pg1->OwnerDevHandle)); | |
291 | printk("Attached Device Handle=0x%X\n", | |
292 | le16_to_cpu(pg1->AttachedDevHandle)); | |
293 | } | |
294 | #else | |
295 | #define mptsas_print_phy_data(phy_data) do { } while (0) | |
296 | #define mptsas_print_phy_pg0(pg0) do { } while (0) | |
297 | #define mptsas_print_phy_pg1(pg1) do { } while (0) | |
298 | #define mptsas_print_device_pg0(pg0) do { } while (0) | |
299 | #define mptsas_print_expander_pg1(pg1) do { } while (0) | |
300 | #endif | |
301 | ||
e3094447 CH |
302 | static inline MPT_ADAPTER *phy_to_ioc(struct sas_phy *phy) |
303 | { | |
304 | struct Scsi_Host *shost = dev_to_shost(phy->dev.parent); | |
305 | return ((MPT_SCSI_HOST *)shost->hostdata)->ioc; | |
306 | } | |
307 | ||
308 | static inline MPT_ADAPTER *rphy_to_ioc(struct sas_rphy *rphy) | |
309 | { | |
310 | struct Scsi_Host *shost = dev_to_shost(rphy->dev.parent->parent); | |
311 | return ((MPT_SCSI_HOST *)shost->hostdata)->ioc; | |
312 | } | |
313 | ||
e6b2d76a ME |
314 | /* |
315 | * mptsas_find_portinfo_by_handle | |
316 | * | |
317 | * This function should be called with the sas_topology_mutex already held | |
318 | */ | |
319 | static struct mptsas_portinfo * | |
320 | mptsas_find_portinfo_by_handle(MPT_ADAPTER *ioc, u16 handle) | |
321 | { | |
322 | struct mptsas_portinfo *port_info, *rc=NULL; | |
323 | int i; | |
324 | ||
325 | list_for_each_entry(port_info, &ioc->sas_topology, list) | |
326 | for (i = 0; i < port_info->num_phys; i++) | |
327 | if (port_info->phy_info[i].identify.handle == handle) { | |
328 | rc = port_info; | |
329 | goto out; | |
330 | } | |
331 | out: | |
332 | return rc; | |
333 | } | |
334 | ||
bd23e94c ME |
335 | /* |
336 | * Returns true if there is a scsi end device | |
337 | */ | |
338 | static inline int | |
339 | mptsas_is_end_device(struct mptsas_devinfo * attached) | |
340 | { | |
547f9a21 | 341 | if ((attached->sas_address) && |
bd23e94c ME |
342 | (attached->device_info & |
343 | MPI_SAS_DEVICE_INFO_END_DEVICE) && | |
344 | ((attached->device_info & | |
345 | MPI_SAS_DEVICE_INFO_SSP_TARGET) | | |
346 | (attached->device_info & | |
347 | MPI_SAS_DEVICE_INFO_STP_TARGET) | | |
348 | (attached->device_info & | |
349 | MPI_SAS_DEVICE_INFO_SATA_DEVICE))) | |
350 | return 1; | |
351 | else | |
352 | return 0; | |
353 | } | |
354 | ||
547f9a21 | 355 | /* no mutex */ |
376ac830 | 356 | static void |
547f9a21 EM |
357 | mptsas_port_delete(struct mptsas_portinfo_details * port_details) |
358 | { | |
359 | struct mptsas_portinfo *port_info; | |
360 | struct mptsas_phyinfo *phy_info; | |
361 | u8 i; | |
362 | ||
363 | if (!port_details) | |
364 | return; | |
365 | ||
366 | port_info = port_details->port_info; | |
367 | phy_info = port_info->phy_info; | |
368 | ||
dc22f16d | 369 | dsaswideprintk((KERN_DEBUG "%s: [%p]: num_phys=%02d " |
f99be43b EM |
370 | "bitmask=0x%016llX\n", __FUNCTION__, port_details, |
371 | port_details->num_phys, (unsigned long long) | |
372 | port_details->phy_bitmask)); | |
547f9a21 EM |
373 | |
374 | for (i = 0; i < port_info->num_phys; i++, phy_info++) { | |
375 | if(phy_info->port_details != port_details) | |
376 | continue; | |
377 | memset(&phy_info->attached, 0, sizeof(struct mptsas_devinfo)); | |
378 | phy_info->port_details = NULL; | |
379 | } | |
380 | kfree(port_details); | |
381 | } | |
382 | ||
383 | static inline struct sas_rphy * | |
384 | mptsas_get_rphy(struct mptsas_phyinfo *phy_info) | |
385 | { | |
386 | if (phy_info->port_details) | |
387 | return phy_info->port_details->rphy; | |
388 | else | |
389 | return NULL; | |
390 | } | |
391 | ||
392 | static inline void | |
393 | mptsas_set_rphy(struct mptsas_phyinfo *phy_info, struct sas_rphy *rphy) | |
394 | { | |
395 | if (phy_info->port_details) { | |
396 | phy_info->port_details->rphy = rphy; | |
397 | dsaswideprintk((KERN_DEBUG "sas_rphy_add: rphy=%p\n", rphy)); | |
398 | } | |
399 | ||
400 | #ifdef MPT_DEBUG_SAS_WIDE | |
401 | if (rphy) { | |
402 | dev_printk(KERN_DEBUG, &rphy->dev, "add:"); | |
403 | printk("rphy=%p release=%p\n", | |
404 | rphy, rphy->dev.release); | |
405 | } | |
406 | #endif | |
407 | } | |
408 | ||
409 | static inline struct sas_port * | |
410 | mptsas_get_port(struct mptsas_phyinfo *phy_info) | |
411 | { | |
412 | if (phy_info->port_details) | |
413 | return phy_info->port_details->port; | |
414 | else | |
415 | return NULL; | |
416 | } | |
417 | ||
418 | static inline void | |
419 | mptsas_set_port(struct mptsas_phyinfo *phy_info, struct sas_port *port) | |
420 | { | |
421 | if (phy_info->port_details) | |
422 | phy_info->port_details->port = port; | |
423 | ||
424 | #ifdef MPT_DEBUG_SAS_WIDE | |
425 | if (port) { | |
426 | dev_printk(KERN_DEBUG, &port->dev, "add: "); | |
427 | printk("port=%p release=%p\n", | |
428 | port, port->dev.release); | |
429 | } | |
430 | #endif | |
431 | } | |
432 | ||
433 | static inline struct scsi_target * | |
434 | mptsas_get_starget(struct mptsas_phyinfo *phy_info) | |
435 | { | |
436 | if (phy_info->port_details) | |
437 | return phy_info->port_details->starget; | |
438 | else | |
439 | return NULL; | |
440 | } | |
441 | ||
442 | static inline void | |
443 | mptsas_set_starget(struct mptsas_phyinfo *phy_info, struct scsi_target * | |
444 | starget) | |
445 | { | |
446 | if (phy_info->port_details) | |
447 | phy_info->port_details->starget = starget; | |
448 | } | |
449 | ||
450 | ||
451 | /* | |
452 | * mptsas_setup_wide_ports | |
453 | * | |
454 | * Updates for new and existing narrow/wide port configuration | |
455 | * in the sas_topology | |
456 | */ | |
376ac830 | 457 | static void |
547f9a21 EM |
458 | mptsas_setup_wide_ports(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info) |
459 | { | |
460 | struct mptsas_portinfo_details * port_details; | |
461 | struct mptsas_phyinfo *phy_info, *phy_info_cmp; | |
462 | u64 sas_address; | |
463 | int i, j; | |
464 | ||
465 | mutex_lock(&ioc->sas_topology_mutex); | |
466 | ||
467 | phy_info = port_info->phy_info; | |
468 | for (i = 0 ; i < port_info->num_phys ; i++, phy_info++) { | |
469 | if (phy_info->attached.handle) | |
470 | continue; | |
471 | port_details = phy_info->port_details; | |
472 | if (!port_details) | |
473 | continue; | |
474 | if (port_details->num_phys < 2) | |
475 | continue; | |
476 | /* | |
477 | * Removing a phy from a port, letting the last | |
478 | * phy be removed by firmware events. | |
479 | */ | |
480 | dsaswideprintk((KERN_DEBUG | |
dc22f16d EM |
481 | "%s: [%p]: deleting phy = %d\n", |
482 | __FUNCTION__, port_details, i)); | |
547f9a21 EM |
483 | port_details->num_phys--; |
484 | port_details->phy_bitmask &= ~ (1 << phy_info->phy_id); | |
485 | memset(&phy_info->attached, 0, sizeof(struct mptsas_devinfo)); | |
486 | sas_port_delete_phy(port_details->port, phy_info->phy); | |
487 | phy_info->port_details = NULL; | |
488 | } | |
489 | ||
490 | /* | |
491 | * Populate and refresh the tree | |
492 | */ | |
493 | phy_info = port_info->phy_info; | |
494 | for (i = 0 ; i < port_info->num_phys ; i++, phy_info++) { | |
495 | sas_address = phy_info->attached.sas_address; | |
496 | dsaswideprintk((KERN_DEBUG "phy_id=%d sas_address=0x%018llX\n", | |
f99be43b | 497 | i, (unsigned long long)sas_address)); |
547f9a21 EM |
498 | if (!sas_address) |
499 | continue; | |
500 | port_details = phy_info->port_details; | |
501 | /* | |
502 | * Forming a port | |
503 | */ | |
504 | if (!port_details) { | |
505 | port_details = kzalloc(sizeof(*port_details), | |
506 | GFP_KERNEL); | |
507 | if (!port_details) | |
508 | goto out; | |
509 | port_details->num_phys = 1; | |
510 | port_details->port_info = port_info; | |
547f9a21 EM |
511 | if (phy_info->phy_id < 64 ) |
512 | port_details->phy_bitmask |= | |
513 | (1 << phy_info->phy_id); | |
514 | phy_info->sas_port_add_phy=1; | |
515 | dsaswideprintk((KERN_DEBUG "\t\tForming port\n\t\t" | |
f99be43b EM |
516 | "phy_id=%d sas_address=0x%018llX\n", |
517 | i, (unsigned long long)sas_address)); | |
547f9a21 EM |
518 | phy_info->port_details = port_details; |
519 | } | |
520 | ||
521 | if (i == port_info->num_phys - 1) | |
522 | continue; | |
523 | phy_info_cmp = &port_info->phy_info[i + 1]; | |
524 | for (j = i + 1 ; j < port_info->num_phys ; j++, | |
525 | phy_info_cmp++) { | |
526 | if (!phy_info_cmp->attached.sas_address) | |
527 | continue; | |
528 | if (sas_address != phy_info_cmp->attached.sas_address) | |
529 | continue; | |
530 | if (phy_info_cmp->port_details == port_details ) | |
531 | continue; | |
532 | dsaswideprintk((KERN_DEBUG | |
f99be43b EM |
533 | "\t\tphy_id=%d sas_address=0x%018llX\n", |
534 | j, (unsigned long long) | |
535 | phy_info_cmp->attached.sas_address)); | |
547f9a21 EM |
536 | if (phy_info_cmp->port_details) { |
537 | port_details->rphy = | |
538 | mptsas_get_rphy(phy_info_cmp); | |
539 | port_details->port = | |
540 | mptsas_get_port(phy_info_cmp); | |
541 | port_details->starget = | |
542 | mptsas_get_starget(phy_info_cmp); | |
547f9a21 EM |
543 | port_details->num_phys = |
544 | phy_info_cmp->port_details->num_phys; | |
547f9a21 EM |
545 | if (!phy_info_cmp->port_details->num_phys) |
546 | kfree(phy_info_cmp->port_details); | |
547 | } else | |
548 | phy_info_cmp->sas_port_add_phy=1; | |
549 | /* | |
550 | * Adding a phy to a port | |
551 | */ | |
552 | phy_info_cmp->port_details = port_details; | |
553 | if (phy_info_cmp->phy_id < 64 ) | |
554 | port_details->phy_bitmask |= | |
555 | (1 << phy_info_cmp->phy_id); | |
556 | port_details->num_phys++; | |
557 | } | |
558 | } | |
559 | ||
560 | out: | |
561 | ||
562 | #ifdef MPT_DEBUG_SAS_WIDE | |
563 | for (i = 0; i < port_info->num_phys; i++) { | |
564 | port_details = port_info->phy_info[i].port_details; | |
565 | if (!port_details) | |
566 | continue; | |
567 | dsaswideprintk((KERN_DEBUG | |
f99be43b EM |
568 | "%s: [%p]: phy_id=%02d num_phys=%02d " |
569 | "bitmask=0x%016llX\n", __FUNCTION__, | |
570 | port_details, i, port_details->num_phys, | |
571 | (unsigned long long)port_details->phy_bitmask)); | |
547f9a21 EM |
572 | dsaswideprintk((KERN_DEBUG"\t\tport = %p rphy=%p\n", |
573 | port_details->port, port_details->rphy)); | |
574 | } | |
575 | dsaswideprintk((KERN_DEBUG"\n")); | |
576 | #endif | |
577 | mutex_unlock(&ioc->sas_topology_mutex); | |
578 | } | |
579 | ||
df9e062a EM |
580 | /** |
581 | * csmisas_find_vtarget | |
582 | * | |
583 | * @ioc | |
584 | * @volume_id | |
585 | * @volume_bus | |
586 | * | |
587 | **/ | |
588 | static VirtTarget * | |
589 | mptsas_find_vtarget(MPT_ADAPTER *ioc, u8 channel, u8 id) | |
590 | { | |
591 | struct scsi_device *sdev; | |
592 | VirtDevice *vdev; | |
593 | VirtTarget *vtarget = NULL; | |
594 | ||
595 | shost_for_each_device(sdev, ioc->sh) { | |
596 | if ((vdev = sdev->hostdata) == NULL) | |
597 | continue; | |
598 | if (vdev->vtarget->id == id && | |
599 | vdev->vtarget->channel == channel) | |
600 | vtarget = vdev->vtarget; | |
601 | } | |
602 | return vtarget; | |
603 | } | |
604 | ||
605 | /** | |
606 | * mptsas_target_reset | |
607 | * | |
608 | * Issues TARGET_RESET to end device using handshaking method | |
609 | * | |
610 | * @ioc | |
611 | * @channel | |
612 | * @id | |
613 | * | |
614 | * Returns (1) success | |
615 | * (0) failure | |
616 | * | |
617 | **/ | |
618 | static int | |
619 | mptsas_target_reset(MPT_ADAPTER *ioc, u8 channel, u8 id) | |
620 | { | |
621 | MPT_FRAME_HDR *mf; | |
622 | SCSITaskMgmt_t *pScsiTm; | |
623 | ||
624 | if ((mf = mpt_get_msg_frame(ioc->TaskCtx, ioc)) == NULL) { | |
625 | dfailprintk((MYIOC_s_WARN_FMT "%s, no msg frames @%d!!\n", | |
626 | ioc->name,__FUNCTION__, __LINE__)); | |
627 | return 0; | |
628 | } | |
629 | ||
630 | /* Format the Request | |
631 | */ | |
632 | pScsiTm = (SCSITaskMgmt_t *) mf; | |
633 | memset (pScsiTm, 0, sizeof(SCSITaskMgmt_t)); | |
634 | pScsiTm->TargetID = id; | |
635 | pScsiTm->Bus = channel; | |
636 | pScsiTm->Function = MPI_FUNCTION_SCSI_TASK_MGMT; | |
637 | pScsiTm->TaskType = MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET; | |
638 | pScsiTm->MsgFlags = MPI_SCSITASKMGMT_MSGFLAGS_LIPRESET_RESET_OPTION; | |
639 | ||
640 | DBG_DUMP_TM_REQUEST_FRAME(mf); | |
641 | ||
642 | if (mpt_send_handshake_request(ioc->TaskCtx, ioc, | |
643 | sizeof(SCSITaskMgmt_t), (u32 *)mf, NO_SLEEP)) { | |
644 | mpt_free_msg_frame(ioc, mf); | |
645 | dfailprintk((MYIOC_s_WARN_FMT "%s, tm handshake failed @%d!!\n", | |
646 | ioc->name,__FUNCTION__, __LINE__)); | |
647 | return 0; | |
648 | } | |
649 | ||
650 | return 1; | |
651 | } | |
652 | ||
653 | /** | |
654 | * mptsas_target_reset_queue | |
655 | * | |
656 | * Receive request for TARGET_RESET after recieving an firmware | |
657 | * event NOT_RESPONDING_EVENT, then put command in link list | |
658 | * and queue if task_queue already in use. | |
659 | * | |
660 | * @ioc | |
661 | * @sas_event_data | |
662 | * | |
663 | **/ | |
547f9a21 | 664 | static void |
df9e062a EM |
665 | mptsas_target_reset_queue(MPT_ADAPTER *ioc, |
666 | EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *sas_event_data) | |
547f9a21 | 667 | { |
df9e062a EM |
668 | MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)ioc->sh->hostdata; |
669 | VirtTarget *vtarget = NULL; | |
670 | struct mptsas_target_reset_event *target_reset_list; | |
671 | u8 id, channel; | |
547f9a21 | 672 | |
df9e062a EM |
673 | id = sas_event_data->TargetID; |
674 | channel = sas_event_data->Bus; | |
675 | ||
676 | if (!(vtarget = mptsas_find_vtarget(ioc, channel, id))) | |
677 | return; | |
678 | ||
679 | vtarget->deleted = 1; /* block IO */ | |
680 | ||
681 | target_reset_list = kzalloc(sizeof(*target_reset_list), | |
682 | GFP_ATOMIC); | |
683 | if (!target_reset_list) { | |
684 | dfailprintk((MYIOC_s_WARN_FMT "%s, failed to allocate mem @%d..!!\n", | |
685 | ioc->name,__FUNCTION__, __LINE__)); | |
686 | return; | |
687 | } | |
688 | ||
689 | memcpy(&target_reset_list->sas_event_data, sas_event_data, | |
690 | sizeof(*sas_event_data)); | |
691 | list_add_tail(&target_reset_list->list, &hd->target_reset_list); | |
692 | ||
693 | if (hd->resetPending) | |
694 | return; | |
695 | ||
696 | if (mptsas_target_reset(ioc, channel, id)) { | |
697 | target_reset_list->target_reset_issued = 1; | |
698 | hd->resetPending = 1; | |
699 | } | |
700 | } | |
701 | ||
702 | /** | |
703 | * mptsas_dev_reset_complete | |
704 | * | |
705 | * Completion for TARGET_RESET after NOT_RESPONDING_EVENT, | |
706 | * enable work queue to finish off removing device from upper layers. | |
707 | * then send next TARGET_RESET in the queue. | |
708 | * | |
709 | * @ioc | |
710 | * | |
711 | **/ | |
712 | static void | |
713 | mptsas_dev_reset_complete(MPT_ADAPTER *ioc) | |
714 | { | |
715 | MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)ioc->sh->hostdata; | |
716 | struct list_head *head = &hd->target_reset_list; | |
717 | struct mptsas_target_reset_event *target_reset_list; | |
718 | struct mptsas_hotplug_event *ev; | |
719 | EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *sas_event_data; | |
720 | u8 id, channel; | |
721 | __le64 sas_address; | |
722 | ||
723 | if (list_empty(head)) | |
724 | return; | |
725 | ||
726 | target_reset_list = list_entry(head->next, struct mptsas_target_reset_event, list); | |
727 | ||
728 | sas_event_data = &target_reset_list->sas_event_data; | |
729 | id = sas_event_data->TargetID; | |
730 | channel = sas_event_data->Bus; | |
731 | hd->resetPending = 0; | |
732 | ||
733 | /* | |
734 | * retry target reset | |
735 | */ | |
736 | if (!target_reset_list->target_reset_issued) { | |
737 | if (mptsas_target_reset(ioc, channel, id)) { | |
738 | target_reset_list->target_reset_issued = 1; | |
739 | hd->resetPending = 1; | |
740 | } | |
741 | return; | |
742 | } | |
743 | ||
744 | /* | |
745 | * enable work queue to remove device from upper layers | |
746 | */ | |
747 | list_del(&target_reset_list->list); | |
748 | ||
749 | ev = kzalloc(sizeof(*ev), GFP_ATOMIC); | |
750 | if (!ev) { | |
751 | dfailprintk((MYIOC_s_WARN_FMT "%s, failed to allocate mem @%d..!!\n", | |
752 | ioc->name,__FUNCTION__, __LINE__)); | |
753 | return; | |
754 | } | |
755 | ||
756 | INIT_WORK(&ev->work, mptsas_hotplug_work); | |
757 | ev->ioc = ioc; | |
758 | ev->handle = le16_to_cpu(sas_event_data->DevHandle); | |
759 | ev->parent_handle = | |
760 | le16_to_cpu(sas_event_data->ParentDevHandle); | |
761 | ev->channel = channel; | |
762 | ev->id =id; | |
763 | ev->phy_id = sas_event_data->PhyNum; | |
764 | memcpy(&sas_address, &sas_event_data->SASAddress, | |
765 | sizeof(__le64)); | |
766 | ev->sas_address = le64_to_cpu(sas_address); | |
767 | ev->device_info = le32_to_cpu(sas_event_data->DeviceInfo); | |
768 | ev->event_type = MPTSAS_DEL_DEVICE; | |
769 | schedule_work(&ev->work); | |
770 | kfree(target_reset_list); | |
771 | ||
772 | /* | |
773 | * issue target reset to next device in the queue | |
774 | */ | |
775 | ||
776 | head = &hd->target_reset_list; | |
777 | if (list_empty(head)) | |
778 | return; | |
779 | ||
780 | target_reset_list = list_entry(head->next, struct mptsas_target_reset_event, | |
781 | list); | |
782 | ||
783 | sas_event_data = &target_reset_list->sas_event_data; | |
784 | id = sas_event_data->TargetID; | |
785 | channel = sas_event_data->Bus; | |
786 | ||
787 | if (mptsas_target_reset(ioc, channel, id)) { | |
788 | target_reset_list->target_reset_issued = 1; | |
789 | hd->resetPending = 1; | |
790 | } | |
791 | } | |
792 | ||
793 | /** | |
794 | * mptsas_taskmgmt_complete | |
795 | * | |
796 | * @ioc | |
797 | * @mf | |
798 | * @mr | |
799 | * | |
800 | **/ | |
801 | static int | |
802 | mptsas_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr) | |
803 | { | |
804 | mptsas_dev_reset_complete(ioc); | |
805 | return mptscsih_taskmgmt_complete(ioc, mf, mr); | |
806 | } | |
807 | ||
808 | /** | |
809 | * mptscsih_ioc_reset | |
810 | * | |
811 | * @ioc | |
812 | * @reset_phase | |
813 | * | |
814 | **/ | |
815 | static int | |
816 | mptsas_ioc_reset(MPT_ADAPTER *ioc, int reset_phase) | |
817 | { | |
ba76ef24 | 818 | MPT_SCSI_HOST *hd; |
df9e062a EM |
819 | struct mptsas_target_reset_event *target_reset_list, *n; |
820 | int rc; | |
821 | ||
822 | rc = mptscsih_ioc_reset(ioc, reset_phase); | |
823 | ||
824 | if (ioc->bus_type != SAS) | |
825 | goto out; | |
826 | ||
827 | if (reset_phase != MPT_IOC_POST_RESET) | |
828 | goto out; | |
829 | ||
ba76ef24 JL |
830 | if (!ioc->sh || !ioc->sh->hostdata) |
831 | goto out; | |
832 | hd = (MPT_SCSI_HOST *)ioc->sh->hostdata; | |
833 | if (!hd->ioc) | |
df9e062a EM |
834 | goto out; |
835 | ||
836 | if (list_empty(&hd->target_reset_list)) | |
837 | goto out; | |
838 | ||
839 | /* flush the target_reset_list */ | |
840 | list_for_each_entry_safe(target_reset_list, n, | |
841 | &hd->target_reset_list, list) { | |
842 | list_del(&target_reset_list->list); | |
843 | kfree(target_reset_list); | |
547f9a21 | 844 | } |
df9e062a EM |
845 | |
846 | out: | |
847 | return rc; | |
547f9a21 EM |
848 | } |
849 | ||
e3094447 | 850 | static int |
52435430 | 851 | mptsas_sas_enclosure_pg0(MPT_ADAPTER *ioc, struct mptsas_enclosure *enclosure, |
e3094447 CH |
852 | u32 form, u32 form_specific) |
853 | { | |
854 | ConfigExtendedPageHeader_t hdr; | |
855 | CONFIGPARMS cfg; | |
856 | SasEnclosurePage0_t *buffer; | |
857 | dma_addr_t dma_handle; | |
858 | int error; | |
859 | __le64 le_identifier; | |
860 | ||
861 | memset(&hdr, 0, sizeof(hdr)); | |
862 | hdr.PageVersion = MPI_SASENCLOSURE0_PAGEVERSION; | |
863 | hdr.PageNumber = 0; | |
864 | hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED; | |
865 | hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_ENCLOSURE; | |
866 | ||
867 | cfg.cfghdr.ehdr = &hdr; | |
868 | cfg.physAddr = -1; | |
869 | cfg.pageAddr = form + form_specific; | |
870 | cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; | |
871 | cfg.dir = 0; /* read */ | |
872 | cfg.timeout = 10; | |
873 | ||
874 | error = mpt_config(ioc, &cfg); | |
875 | if (error) | |
876 | goto out; | |
877 | if (!hdr.ExtPageLength) { | |
878 | error = -ENXIO; | |
879 | goto out; | |
880 | } | |
881 | ||
882 | buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4, | |
883 | &dma_handle); | |
884 | if (!buffer) { | |
885 | error = -ENOMEM; | |
886 | goto out; | |
887 | } | |
888 | ||
889 | cfg.physAddr = dma_handle; | |
890 | cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; | |
891 | ||
892 | error = mpt_config(ioc, &cfg); | |
893 | if (error) | |
894 | goto out_free_consistent; | |
895 | ||
896 | /* save config data */ | |
897 | memcpy(&le_identifier, &buffer->EnclosureLogicalID, sizeof(__le64)); | |
898 | enclosure->enclosure_logical_id = le64_to_cpu(le_identifier); | |
899 | enclosure->enclosure_handle = le16_to_cpu(buffer->EnclosureHandle); | |
900 | enclosure->flags = le16_to_cpu(buffer->Flags); | |
901 | enclosure->num_slot = le16_to_cpu(buffer->NumSlots); | |
902 | enclosure->start_slot = le16_to_cpu(buffer->StartSlot); | |
903 | enclosure->start_id = buffer->StartTargetID; | |
904 | enclosure->start_channel = buffer->StartBus; | |
905 | enclosure->sep_id = buffer->SEPTargetID; | |
906 | enclosure->sep_channel = buffer->SEPBus; | |
907 | ||
908 | out_free_consistent: | |
909 | pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4, | |
910 | buffer, dma_handle); | |
911 | out: | |
912 | return error; | |
913 | } | |
b5141128 | 914 | |
f013db32 JB |
915 | static int |
916 | mptsas_slave_configure(struct scsi_device *sdev) | |
917 | { | |
3c0c25b9 | 918 | |
e8bf3941 JB |
919 | if (sdev->channel == MPTSAS_RAID_CHANNEL) |
920 | goto out; | |
921 | ||
922 | sas_read_port_mode_page(sdev); | |
f013db32 | 923 | |
e8bf3941 | 924 | out: |
f013db32 JB |
925 | return mptscsih_slave_configure(sdev); |
926 | } | |
927 | ||
547f9a21 EM |
928 | static int |
929 | mptsas_target_alloc(struct scsi_target *starget) | |
930 | { | |
931 | struct Scsi_Host *host = dev_to_shost(&starget->dev); | |
932 | MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)host->hostdata; | |
933 | VirtTarget *vtarget; | |
793955f5 | 934 | u8 id, channel; |
547f9a21 EM |
935 | struct sas_rphy *rphy; |
936 | struct mptsas_portinfo *p; | |
937 | int i; | |
938 | ||
939 | vtarget = kzalloc(sizeof(VirtTarget), GFP_KERNEL); | |
940 | if (!vtarget) | |
941 | return -ENOMEM; | |
942 | ||
943 | vtarget->starget = starget; | |
944 | vtarget->ioc_id = hd->ioc->id; | |
793955f5 EM |
945 | vtarget->tflags = MPT_TARGET_FLAGS_Q_YES; |
946 | id = starget->id; | |
547f9a21 EM |
947 | channel = 0; |
948 | ||
793955f5 EM |
949 | /* |
950 | * RAID volumes placed beyond the last expected port. | |
951 | */ | |
952 | if (starget->channel == MPTSAS_RAID_CHANNEL) { | |
953 | for (i=0; i < hd->ioc->raid_data.pIocPg2->NumActiveVolumes; i++) | |
954 | if (id == hd->ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID) | |
955 | channel = hd->ioc->raid_data.pIocPg2->RaidVolume[i].VolumeBus; | |
547f9a21 | 956 | goto out; |
793955f5 | 957 | } |
547f9a21 EM |
958 | |
959 | rphy = dev_to_rphy(starget->dev.parent); | |
960 | mutex_lock(&hd->ioc->sas_topology_mutex); | |
961 | list_for_each_entry(p, &hd->ioc->sas_topology, list) { | |
962 | for (i = 0; i < p->num_phys; i++) { | |
963 | if (p->phy_info[i].attached.sas_address != | |
964 | rphy->identify.sas_address) | |
965 | continue; | |
793955f5 | 966 | id = p->phy_info[i].attached.id; |
547f9a21 EM |
967 | channel = p->phy_info[i].attached.channel; |
968 | mptsas_set_starget(&p->phy_info[i], starget); | |
969 | ||
970 | /* | |
971 | * Exposing hidden raid components | |
972 | */ | |
793955f5 EM |
973 | if (mptscsih_is_phys_disk(hd->ioc, channel, id)) { |
974 | id = mptscsih_raid_id_to_num(hd->ioc, | |
975 | channel, id); | |
547f9a21 EM |
976 | vtarget->tflags |= |
977 | MPT_TARGET_FLAGS_RAID_COMPONENT; | |
b506ade9 | 978 | p->phy_info[i].attached.phys_disk_num = id; |
547f9a21 EM |
979 | } |
980 | mutex_unlock(&hd->ioc->sas_topology_mutex); | |
981 | goto out; | |
982 | } | |
983 | } | |
984 | mutex_unlock(&hd->ioc->sas_topology_mutex); | |
985 | ||
986 | kfree(vtarget); | |
987 | return -ENXIO; | |
988 | ||
989 | out: | |
793955f5 EM |
990 | vtarget->id = id; |
991 | vtarget->channel = channel; | |
547f9a21 EM |
992 | starget->hostdata = vtarget; |
993 | return 0; | |
994 | } | |
995 | ||
996 | static void | |
997 | mptsas_target_destroy(struct scsi_target *starget) | |
998 | { | |
999 | struct Scsi_Host *host = dev_to_shost(&starget->dev); | |
1000 | MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)host->hostdata; | |
1001 | struct sas_rphy *rphy; | |
1002 | struct mptsas_portinfo *p; | |
1003 | int i; | |
1004 | ||
1005 | if (!starget->hostdata) | |
1006 | return; | |
1007 | ||
e8bf3941 | 1008 | if (starget->channel == MPTSAS_RAID_CHANNEL) |
547f9a21 EM |
1009 | goto out; |
1010 | ||
1011 | rphy = dev_to_rphy(starget->dev.parent); | |
1012 | list_for_each_entry(p, &hd->ioc->sas_topology, list) { | |
1013 | for (i = 0; i < p->num_phys; i++) { | |
1014 | if (p->phy_info[i].attached.sas_address != | |
1015 | rphy->identify.sas_address) | |
1016 | continue; | |
1017 | mptsas_set_starget(&p->phy_info[i], NULL); | |
1018 | goto out; | |
1019 | } | |
1020 | } | |
1021 | ||
1022 | out: | |
1023 | kfree(starget->hostdata); | |
1024 | starget->hostdata = NULL; | |
1025 | } | |
1026 | ||
1027 | ||
0c33b27d | 1028 | static int |
c7c82987 | 1029 | mptsas_slave_alloc(struct scsi_device *sdev) |
0c33b27d | 1030 | { |
c7c82987 | 1031 | struct Scsi_Host *host = sdev->host; |
0c33b27d CH |
1032 | MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)host->hostdata; |
1033 | struct sas_rphy *rphy; | |
1034 | struct mptsas_portinfo *p; | |
1035 | VirtDevice *vdev; | |
c7c82987 | 1036 | struct scsi_target *starget; |
547f9a21 | 1037 | int i; |
0c33b27d | 1038 | |
1ca00bb7 | 1039 | vdev = kzalloc(sizeof(VirtDevice), GFP_KERNEL); |
0c33b27d | 1040 | if (!vdev) { |
547f9a21 | 1041 | printk(MYIOC_s_ERR_FMT "slave_alloc kzalloc(%zd) FAILED!\n", |
0c33b27d CH |
1042 | hd->ioc->name, sizeof(VirtDevice)); |
1043 | return -ENOMEM; | |
1044 | } | |
c7c82987 | 1045 | starget = scsi_target(sdev); |
547f9a21 | 1046 | vdev->vtarget = starget->hostdata; |
0c33b27d | 1047 | |
e8bf3941 | 1048 | if (sdev->channel == MPTSAS_RAID_CHANNEL) |
816aa907 | 1049 | goto out; |
816aa907 | 1050 | |
c7c82987 | 1051 | rphy = dev_to_rphy(sdev->sdev_target->dev.parent); |
9a28f49a | 1052 | mutex_lock(&hd->ioc->sas_topology_mutex); |
0c33b27d CH |
1053 | list_for_each_entry(p, &hd->ioc->sas_topology, list) { |
1054 | for (i = 0; i < p->num_phys; i++) { | |
547f9a21 EM |
1055 | if (p->phy_info[i].attached.sas_address != |
1056 | rphy->identify.sas_address) | |
1057 | continue; | |
1058 | vdev->lun = sdev->lun; | |
1059 | /* | |
1060 | * Exposing hidden raid components | |
1061 | */ | |
1062 | if (mptscsih_is_phys_disk(hd->ioc, | |
793955f5 EM |
1063 | p->phy_info[i].attached.channel, |
1064 | p->phy_info[i].attached.id)) | |
547f9a21 EM |
1065 | sdev->no_uld_attach = 1; |
1066 | mutex_unlock(&hd->ioc->sas_topology_mutex); | |
1067 | goto out; | |
0c33b27d CH |
1068 | } |
1069 | } | |
9a28f49a | 1070 | mutex_unlock(&hd->ioc->sas_topology_mutex); |
0c33b27d | 1071 | |
0c33b27d | 1072 | kfree(vdev); |
23f236ed | 1073 | return -ENXIO; |
0c33b27d CH |
1074 | |
1075 | out: | |
547f9a21 EM |
1076 | vdev->vtarget->num_luns++; |
1077 | sdev->hostdata = vdev; | |
0c33b27d CH |
1078 | return 0; |
1079 | } | |
1080 | ||
547f9a21 EM |
1081 | static int |
1082 | mptsas_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) | |
9a28f49a | 1083 | { |
547f9a21 | 1084 | VirtDevice *vdev = SCpnt->device->hostdata; |
7d3eecf7 | 1085 | |
793955f5 | 1086 | if (!vdev || !vdev->vtarget || vdev->vtarget->deleted) { |
547f9a21 EM |
1087 | SCpnt->result = DID_NO_CONNECT << 16; |
1088 | done(SCpnt); | |
1089 | return 0; | |
7d3eecf7 | 1090 | } |
547f9a21 | 1091 | |
793955f5 EM |
1092 | // scsi_print_command(SCpnt); |
1093 | ||
547f9a21 | 1094 | return mptscsih_qcmd(SCpnt,done); |
9a28f49a CH |
1095 | } |
1096 | ||
547f9a21 | 1097 | |
0c33b27d | 1098 | static struct scsi_host_template mptsas_driver_template = { |
f78496da | 1099 | .module = THIS_MODULE, |
0c33b27d CH |
1100 | .proc_name = "mptsas", |
1101 | .proc_info = mptscsih_proc_info, | |
1102 | .name = "MPT SPI Host", | |
1103 | .info = mptscsih_info, | |
547f9a21 EM |
1104 | .queuecommand = mptsas_qcmd, |
1105 | .target_alloc = mptsas_target_alloc, | |
0c33b27d | 1106 | .slave_alloc = mptsas_slave_alloc, |
f013db32 | 1107 | .slave_configure = mptsas_slave_configure, |
547f9a21 EM |
1108 | .target_destroy = mptsas_target_destroy, |
1109 | .slave_destroy = mptscsih_slave_destroy, | |
0c33b27d CH |
1110 | .change_queue_depth = mptscsih_change_queue_depth, |
1111 | .eh_abort_handler = mptscsih_abort, | |
1112 | .eh_device_reset_handler = mptscsih_dev_reset, | |
1113 | .eh_bus_reset_handler = mptscsih_bus_reset, | |
1114 | .eh_host_reset_handler = mptscsih_host_reset, | |
1115 | .bios_param = mptscsih_bios_param, | |
1116 | .can_queue = MPT_FC_CAN_QUEUE, | |
1117 | .this_id = -1, | |
1118 | .sg_tablesize = MPT_SCSI_SG_DEPTH, | |
1119 | .max_sectors = 8192, | |
1120 | .cmd_per_lun = 7, | |
1121 | .use_clustering = ENABLE_CLUSTERING, | |
edb9068d | 1122 | .shost_attrs = mptscsih_host_attrs, |
0c33b27d CH |
1123 | }; |
1124 | ||
b5141128 | 1125 | static int mptsas_get_linkerrors(struct sas_phy *phy) |
0c33b27d | 1126 | { |
b5141128 CH |
1127 | MPT_ADAPTER *ioc = phy_to_ioc(phy); |
1128 | ConfigExtendedPageHeader_t hdr; | |
1129 | CONFIGPARMS cfg; | |
1130 | SasPhyPage1_t *buffer; | |
1131 | dma_addr_t dma_handle; | |
1132 | int error; | |
0c33b27d | 1133 | |
f4ad7b58 JB |
1134 | /* FIXME: only have link errors on local phys */ |
1135 | if (!scsi_is_sas_phy_local(phy)) | |
1136 | return -EINVAL; | |
1137 | ||
b5141128 CH |
1138 | hdr.PageVersion = MPI_SASPHY1_PAGEVERSION; |
1139 | hdr.ExtPageLength = 0; | |
1140 | hdr.PageNumber = 1 /* page number 1*/; | |
1141 | hdr.Reserved1 = 0; | |
1142 | hdr.Reserved2 = 0; | |
1143 | hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED; | |
1144 | hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_PHY; | |
0c33b27d | 1145 | |
b5141128 CH |
1146 | cfg.cfghdr.ehdr = &hdr; |
1147 | cfg.physAddr = -1; | |
1148 | cfg.pageAddr = phy->identify.phy_identifier; | |
1149 | cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; | |
1150 | cfg.dir = 0; /* read */ | |
1151 | cfg.timeout = 10; | |
0c33b27d | 1152 | |
b5141128 CH |
1153 | error = mpt_config(ioc, &cfg); |
1154 | if (error) | |
1155 | return error; | |
1156 | if (!hdr.ExtPageLength) | |
1157 | return -ENXIO; | |
0c33b27d | 1158 | |
b5141128 CH |
1159 | buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4, |
1160 | &dma_handle); | |
1161 | if (!buffer) | |
1162 | return -ENOMEM; | |
0c33b27d | 1163 | |
b5141128 CH |
1164 | cfg.physAddr = dma_handle; |
1165 | cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; | |
1166 | ||
1167 | error = mpt_config(ioc, &cfg); | |
1168 | if (error) | |
1169 | goto out_free_consistent; | |
1170 | ||
1171 | mptsas_print_phy_pg1(buffer); | |
1172 | ||
1173 | phy->invalid_dword_count = le32_to_cpu(buffer->InvalidDwordCount); | |
1174 | phy->running_disparity_error_count = | |
1175 | le32_to_cpu(buffer->RunningDisparityErrorCount); | |
1176 | phy->loss_of_dword_sync_count = | |
1177 | le32_to_cpu(buffer->LossDwordSynchCount); | |
1178 | phy->phy_reset_problem_count = | |
1179 | le32_to_cpu(buffer->PhyResetProblemCount); | |
1180 | ||
1181 | out_free_consistent: | |
1182 | pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4, | |
1183 | buffer, dma_handle); | |
1184 | return error; | |
0c33b27d CH |
1185 | } |
1186 | ||
da4fa655 CH |
1187 | static int mptsas_mgmt_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, |
1188 | MPT_FRAME_HDR *reply) | |
1189 | { | |
1190 | ioc->sas_mgmt.status |= MPT_SAS_MGMT_STATUS_COMMAND_GOOD; | |
1191 | if (reply != NULL) { | |
1192 | ioc->sas_mgmt.status |= MPT_SAS_MGMT_STATUS_RF_VALID; | |
1193 | memcpy(ioc->sas_mgmt.reply, reply, | |
1194 | min(ioc->reply_sz, 4 * reply->u.reply.MsgLength)); | |
1195 | } | |
1196 | complete(&ioc->sas_mgmt.done); | |
1197 | return 1; | |
1198 | } | |
1199 | ||
1200 | static int mptsas_phy_reset(struct sas_phy *phy, int hard_reset) | |
1201 | { | |
1202 | MPT_ADAPTER *ioc = phy_to_ioc(phy); | |
1203 | SasIoUnitControlRequest_t *req; | |
1204 | SasIoUnitControlReply_t *reply; | |
1205 | MPT_FRAME_HDR *mf; | |
1206 | MPIHeader_t *hdr; | |
1207 | unsigned long timeleft; | |
1208 | int error = -ERESTARTSYS; | |
1209 | ||
f4ad7b58 JB |
1210 | /* FIXME: fusion doesn't allow non-local phy reset */ |
1211 | if (!scsi_is_sas_phy_local(phy)) | |
1212 | return -EINVAL; | |
1213 | ||
da4fa655 CH |
1214 | /* not implemented for expanders */ |
1215 | if (phy->identify.target_port_protocols & SAS_PROTOCOL_SMP) | |
1216 | return -ENXIO; | |
1217 | ||
eeb846ce | 1218 | if (mutex_lock_interruptible(&ioc->sas_mgmt.mutex)) |
da4fa655 CH |
1219 | goto out; |
1220 | ||
1221 | mf = mpt_get_msg_frame(mptsasMgmtCtx, ioc); | |
1222 | if (!mf) { | |
1223 | error = -ENOMEM; | |
1224 | goto out_unlock; | |
1225 | } | |
1226 | ||
1227 | hdr = (MPIHeader_t *) mf; | |
1228 | req = (SasIoUnitControlRequest_t *)mf; | |
1229 | memset(req, 0, sizeof(SasIoUnitControlRequest_t)); | |
1230 | req->Function = MPI_FUNCTION_SAS_IO_UNIT_CONTROL; | |
1231 | req->MsgContext = hdr->MsgContext; | |
1232 | req->Operation = hard_reset ? | |
1233 | MPI_SAS_OP_PHY_HARD_RESET : MPI_SAS_OP_PHY_LINK_RESET; | |
1234 | req->PhyNum = phy->identify.phy_identifier; | |
1235 | ||
1236 | mpt_put_msg_frame(mptsasMgmtCtx, ioc, mf); | |
1237 | ||
1238 | timeleft = wait_for_completion_timeout(&ioc->sas_mgmt.done, | |
1239 | 10 * HZ); | |
1240 | if (!timeleft) { | |
1241 | /* On timeout reset the board */ | |
1242 | mpt_free_msg_frame(ioc, mf); | |
1243 | mpt_HardResetHandler(ioc, CAN_SLEEP); | |
1244 | error = -ETIMEDOUT; | |
1245 | goto out_unlock; | |
1246 | } | |
1247 | ||
1248 | /* a reply frame is expected */ | |
1249 | if ((ioc->sas_mgmt.status & | |
1250 | MPT_IOCTL_STATUS_RF_VALID) == 0) { | |
1251 | error = -ENXIO; | |
1252 | goto out_unlock; | |
1253 | } | |
1254 | ||
1255 | /* process the completed Reply Message Frame */ | |
1256 | reply = (SasIoUnitControlReply_t *)ioc->sas_mgmt.reply; | |
1257 | if (reply->IOCStatus != MPI_IOCSTATUS_SUCCESS) { | |
1258 | printk("%s: IOCStatus=0x%X IOCLogInfo=0x%X\n", | |
1259 | __FUNCTION__, | |
1260 | reply->IOCStatus, | |
1261 | reply->IOCLogInfo); | |
1262 | error = -ENXIO; | |
1263 | goto out_unlock; | |
1264 | } | |
1265 | ||
1266 | error = 0; | |
1267 | ||
1268 | out_unlock: | |
eeb846ce | 1269 | mutex_unlock(&ioc->sas_mgmt.mutex); |
da4fa655 CH |
1270 | out: |
1271 | return error; | |
1272 | } | |
0c33b27d | 1273 | |
e3094447 CH |
1274 | static int |
1275 | mptsas_get_enclosure_identifier(struct sas_rphy *rphy, u64 *identifier) | |
1276 | { | |
1277 | MPT_ADAPTER *ioc = rphy_to_ioc(rphy); | |
1278 | int i, error; | |
1279 | struct mptsas_portinfo *p; | |
1280 | struct mptsas_enclosure enclosure_info; | |
1281 | u64 enclosure_handle; | |
1282 | ||
1283 | mutex_lock(&ioc->sas_topology_mutex); | |
1284 | list_for_each_entry(p, &ioc->sas_topology, list) { | |
1285 | for (i = 0; i < p->num_phys; i++) { | |
1286 | if (p->phy_info[i].attached.sas_address == | |
1287 | rphy->identify.sas_address) { | |
1288 | enclosure_handle = p->phy_info[i]. | |
1289 | attached.handle_enclosure; | |
1290 | goto found_info; | |
1291 | } | |
1292 | } | |
1293 | } | |
1294 | mutex_unlock(&ioc->sas_topology_mutex); | |
1295 | return -ENXIO; | |
1296 | ||
1297 | found_info: | |
1298 | mutex_unlock(&ioc->sas_topology_mutex); | |
1299 | memset(&enclosure_info, 0, sizeof(struct mptsas_enclosure)); | |
52435430 | 1300 | error = mptsas_sas_enclosure_pg0(ioc, &enclosure_info, |
e3094447 CH |
1301 | (MPI_SAS_ENCLOS_PGAD_FORM_HANDLE << |
1302 | MPI_SAS_ENCLOS_PGAD_FORM_SHIFT), enclosure_handle); | |
1303 | if (!error) | |
1304 | *identifier = enclosure_info.enclosure_logical_id; | |
1305 | return error; | |
1306 | } | |
1307 | ||
1308 | static int | |
1309 | mptsas_get_bay_identifier(struct sas_rphy *rphy) | |
1310 | { | |
1311 | MPT_ADAPTER *ioc = rphy_to_ioc(rphy); | |
1312 | struct mptsas_portinfo *p; | |
1313 | int i, rc; | |
1314 | ||
1315 | mutex_lock(&ioc->sas_topology_mutex); | |
1316 | list_for_each_entry(p, &ioc->sas_topology, list) { | |
1317 | for (i = 0; i < p->num_phys; i++) { | |
1318 | if (p->phy_info[i].attached.sas_address == | |
1319 | rphy->identify.sas_address) { | |
1320 | rc = p->phy_info[i].attached.slot; | |
1321 | goto out; | |
1322 | } | |
1323 | } | |
1324 | } | |
1325 | rc = -ENXIO; | |
1326 | out: | |
1327 | mutex_unlock(&ioc->sas_topology_mutex); | |
1328 | return rc; | |
1329 | } | |
1330 | ||
b5141128 CH |
1331 | static struct sas_function_template mptsas_transport_functions = { |
1332 | .get_linkerrors = mptsas_get_linkerrors, | |
e3094447 CH |
1333 | .get_enclosure_identifier = mptsas_get_enclosure_identifier, |
1334 | .get_bay_identifier = mptsas_get_bay_identifier, | |
da4fa655 | 1335 | .phy_reset = mptsas_phy_reset, |
b5141128 CH |
1336 | }; |
1337 | ||
1338 | static struct scsi_transport_template *mptsas_transport_template; | |
0c33b27d CH |
1339 | |
1340 | static int | |
1341 | mptsas_sas_io_unit_pg0(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info) | |
1342 | { | |
1343 | ConfigExtendedPageHeader_t hdr; | |
1344 | CONFIGPARMS cfg; | |
1345 | SasIOUnitPage0_t *buffer; | |
1346 | dma_addr_t dma_handle; | |
1347 | int error, i; | |
1348 | ||
1349 | hdr.PageVersion = MPI_SASIOUNITPAGE0_PAGEVERSION; | |
1350 | hdr.ExtPageLength = 0; | |
1351 | hdr.PageNumber = 0; | |
1352 | hdr.Reserved1 = 0; | |
1353 | hdr.Reserved2 = 0; | |
1354 | hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED; | |
1355 | hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_IO_UNIT; | |
1356 | ||
1357 | cfg.cfghdr.ehdr = &hdr; | |
1358 | cfg.physAddr = -1; | |
1359 | cfg.pageAddr = 0; | |
1360 | cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; | |
1361 | cfg.dir = 0; /* read */ | |
1362 | cfg.timeout = 10; | |
1363 | ||
1364 | error = mpt_config(ioc, &cfg); | |
1365 | if (error) | |
1366 | goto out; | |
1367 | if (!hdr.ExtPageLength) { | |
1368 | error = -ENXIO; | |
1369 | goto out; | |
1370 | } | |
1371 | ||
1372 | buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4, | |
1373 | &dma_handle); | |
1374 | if (!buffer) { | |
1375 | error = -ENOMEM; | |
1376 | goto out; | |
1377 | } | |
1378 | ||
1379 | cfg.physAddr = dma_handle; | |
1380 | cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; | |
1381 | ||
1382 | error = mpt_config(ioc, &cfg); | |
1383 | if (error) | |
1384 | goto out_free_consistent; | |
1385 | ||
1386 | port_info->num_phys = buffer->NumPhys; | |
1387 | port_info->phy_info = kcalloc(port_info->num_phys, | |
547f9a21 | 1388 | sizeof(*port_info->phy_info),GFP_KERNEL); |
0c33b27d CH |
1389 | if (!port_info->phy_info) { |
1390 | error = -ENOMEM; | |
1391 | goto out_free_consistent; | |
1392 | } | |
1393 | ||
edb9068d PS |
1394 | ioc->nvdata_version_persistent = |
1395 | le16_to_cpu(buffer->NvdataVersionPersistent); | |
1396 | ioc->nvdata_version_default = | |
1397 | le16_to_cpu(buffer->NvdataVersionDefault); | |
1398 | ||
0c33b27d CH |
1399 | for (i = 0; i < port_info->num_phys; i++) { |
1400 | mptsas_print_phy_data(&buffer->PhyData[i]); | |
1401 | port_info->phy_info[i].phy_id = i; | |
1402 | port_info->phy_info[i].port_id = | |
1403 | buffer->PhyData[i].Port; | |
1404 | port_info->phy_info[i].negotiated_link_rate = | |
1405 | buffer->PhyData[i].NegotiatedLinkRate; | |
547f9a21 | 1406 | port_info->phy_info[i].portinfo = port_info; |
2ecce492 EM |
1407 | port_info->phy_info[i].handle = |
1408 | le16_to_cpu(buffer->PhyData[i].ControllerDevHandle); | |
0c33b27d CH |
1409 | } |
1410 | ||
1411 | out_free_consistent: | |
1412 | pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4, | |
1413 | buffer, dma_handle); | |
1414 | out: | |
1415 | return error; | |
1416 | } | |
1417 | ||
edb9068d PS |
1418 | static int |
1419 | mptsas_sas_io_unit_pg1(MPT_ADAPTER *ioc) | |
1420 | { | |
1421 | ConfigExtendedPageHeader_t hdr; | |
1422 | CONFIGPARMS cfg; | |
1423 | SasIOUnitPage1_t *buffer; | |
1424 | dma_addr_t dma_handle; | |
1425 | int error; | |
1426 | u16 device_missing_delay; | |
1427 | ||
1428 | memset(&hdr, 0, sizeof(ConfigExtendedPageHeader_t)); | |
1429 | memset(&cfg, 0, sizeof(CONFIGPARMS)); | |
1430 | ||
1431 | cfg.cfghdr.ehdr = &hdr; | |
1432 | cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; | |
1433 | cfg.timeout = 10; | |
1434 | cfg.cfghdr.ehdr->PageType = MPI_CONFIG_PAGETYPE_EXTENDED; | |
1435 | cfg.cfghdr.ehdr->ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_IO_UNIT; | |
1436 | cfg.cfghdr.ehdr->PageVersion = MPI_SASIOUNITPAGE1_PAGEVERSION; | |
1437 | cfg.cfghdr.ehdr->PageNumber = 1; | |
1438 | ||
1439 | error = mpt_config(ioc, &cfg); | |
1440 | if (error) | |
1441 | goto out; | |
1442 | if (!hdr.ExtPageLength) { | |
1443 | error = -ENXIO; | |
1444 | goto out; | |
1445 | } | |
1446 | ||
1447 | buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4, | |
1448 | &dma_handle); | |
1449 | if (!buffer) { | |
1450 | error = -ENOMEM; | |
1451 | goto out; | |
1452 | } | |
1453 | ||
1454 | cfg.physAddr = dma_handle; | |
1455 | cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; | |
1456 | ||
1457 | error = mpt_config(ioc, &cfg); | |
1458 | if (error) | |
1459 | goto out_free_consistent; | |
1460 | ||
1461 | ioc->io_missing_delay = | |
1462 | le16_to_cpu(buffer->IODeviceMissingDelay); | |
1463 | device_missing_delay = le16_to_cpu(buffer->ReportDeviceMissingDelay); | |
1464 | ioc->device_missing_delay = (device_missing_delay & MPI_SAS_IOUNIT1_REPORT_MISSING_UNIT_16) ? | |
1465 | (device_missing_delay & MPI_SAS_IOUNIT1_REPORT_MISSING_TIMEOUT_MASK) * 16 : | |
1466 | device_missing_delay & MPI_SAS_IOUNIT1_REPORT_MISSING_TIMEOUT_MASK; | |
1467 | ||
1468 | out_free_consistent: | |
1469 | pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4, | |
1470 | buffer, dma_handle); | |
1471 | out: | |
1472 | return error; | |
1473 | } | |
1474 | ||
0c33b27d CH |
1475 | static int |
1476 | mptsas_sas_phy_pg0(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info, | |
1477 | u32 form, u32 form_specific) | |
1478 | { | |
1479 | ConfigExtendedPageHeader_t hdr; | |
1480 | CONFIGPARMS cfg; | |
1481 | SasPhyPage0_t *buffer; | |
1482 | dma_addr_t dma_handle; | |
1483 | int error; | |
1484 | ||
1485 | hdr.PageVersion = MPI_SASPHY0_PAGEVERSION; | |
1486 | hdr.ExtPageLength = 0; | |
1487 | hdr.PageNumber = 0; | |
1488 | hdr.Reserved1 = 0; | |
1489 | hdr.Reserved2 = 0; | |
1490 | hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED; | |
1491 | hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_PHY; | |
1492 | ||
1493 | cfg.cfghdr.ehdr = &hdr; | |
1494 | cfg.dir = 0; /* read */ | |
1495 | cfg.timeout = 10; | |
1496 | ||
1497 | /* Get Phy Pg 0 for each Phy. */ | |
1498 | cfg.physAddr = -1; | |
1499 | cfg.pageAddr = form + form_specific; | |
1500 | cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; | |
1501 | ||
1502 | error = mpt_config(ioc, &cfg); | |
1503 | if (error) | |
1504 | goto out; | |
1505 | ||
1506 | if (!hdr.ExtPageLength) { | |
1507 | error = -ENXIO; | |
1508 | goto out; | |
1509 | } | |
1510 | ||
1511 | buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4, | |
1512 | &dma_handle); | |
1513 | if (!buffer) { | |
1514 | error = -ENOMEM; | |
1515 | goto out; | |
1516 | } | |
1517 | ||
1518 | cfg.physAddr = dma_handle; | |
1519 | cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; | |
1520 | ||
1521 | error = mpt_config(ioc, &cfg); | |
1522 | if (error) | |
1523 | goto out_free_consistent; | |
1524 | ||
1525 | mptsas_print_phy_pg0(buffer); | |
1526 | ||
1527 | phy_info->hw_link_rate = buffer->HwLinkRate; | |
1528 | phy_info->programmed_link_rate = buffer->ProgrammedLinkRate; | |
1529 | phy_info->identify.handle = le16_to_cpu(buffer->OwnerDevHandle); | |
1530 | phy_info->attached.handle = le16_to_cpu(buffer->AttachedDevHandle); | |
1531 | ||
1532 | out_free_consistent: | |
1533 | pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4, | |
1534 | buffer, dma_handle); | |
1535 | out: | |
1536 | return error; | |
1537 | } | |
1538 | ||
1539 | static int | |
1540 | mptsas_sas_device_pg0(MPT_ADAPTER *ioc, struct mptsas_devinfo *device_info, | |
1541 | u32 form, u32 form_specific) | |
1542 | { | |
1543 | ConfigExtendedPageHeader_t hdr; | |
1544 | CONFIGPARMS cfg; | |
1545 | SasDevicePage0_t *buffer; | |
1546 | dma_addr_t dma_handle; | |
1547 | __le64 sas_address; | |
bd23e94c ME |
1548 | int error=0; |
1549 | ||
1550 | if (ioc->sas_discovery_runtime && | |
1551 | mptsas_is_end_device(device_info)) | |
1552 | goto out; | |
0c33b27d CH |
1553 | |
1554 | hdr.PageVersion = MPI_SASDEVICE0_PAGEVERSION; | |
1555 | hdr.ExtPageLength = 0; | |
1556 | hdr.PageNumber = 0; | |
1557 | hdr.Reserved1 = 0; | |
1558 | hdr.Reserved2 = 0; | |
1559 | hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED; | |
1560 | hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_DEVICE; | |
1561 | ||
1562 | cfg.cfghdr.ehdr = &hdr; | |
1563 | cfg.pageAddr = form + form_specific; | |
1564 | cfg.physAddr = -1; | |
1565 | cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; | |
1566 | cfg.dir = 0; /* read */ | |
1567 | cfg.timeout = 10; | |
1568 | ||
db9c9174 | 1569 | memset(device_info, 0, sizeof(struct mptsas_devinfo)); |
0c33b27d CH |
1570 | error = mpt_config(ioc, &cfg); |
1571 | if (error) | |
1572 | goto out; | |
1573 | if (!hdr.ExtPageLength) { | |
1574 | error = -ENXIO; | |
1575 | goto out; | |
1576 | } | |
1577 | ||
1578 | buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4, | |
1579 | &dma_handle); | |
1580 | if (!buffer) { | |
1581 | error = -ENOMEM; | |
1582 | goto out; | |
1583 | } | |
1584 | ||
1585 | cfg.physAddr = dma_handle; | |
1586 | cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; | |
1587 | ||
1588 | error = mpt_config(ioc, &cfg); | |
1589 | if (error) | |
1590 | goto out_free_consistent; | |
1591 | ||
1592 | mptsas_print_device_pg0(buffer); | |
1593 | ||
1594 | device_info->handle = le16_to_cpu(buffer->DevHandle); | |
c73787ee | 1595 | device_info->handle_parent = le16_to_cpu(buffer->ParentDevHandle); |
e3094447 CH |
1596 | device_info->handle_enclosure = |
1597 | le16_to_cpu(buffer->EnclosureHandle); | |
1598 | device_info->slot = le16_to_cpu(buffer->Slot); | |
0c33b27d CH |
1599 | device_info->phy_id = buffer->PhyNum; |
1600 | device_info->port_id = buffer->PhysicalPort; | |
9a28f49a | 1601 | device_info->id = buffer->TargetID; |
b506ade9 | 1602 | device_info->phys_disk_num = ~0; |
9a28f49a | 1603 | device_info->channel = buffer->Bus; |
0c33b27d CH |
1604 | memcpy(&sas_address, &buffer->SASAddress, sizeof(__le64)); |
1605 | device_info->sas_address = le64_to_cpu(sas_address); | |
1606 | device_info->device_info = | |
1607 | le32_to_cpu(buffer->DeviceInfo); | |
1608 | ||
1609 | out_free_consistent: | |
1610 | pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4, | |
1611 | buffer, dma_handle); | |
1612 | out: | |
1613 | return error; | |
1614 | } | |
1615 | ||
1616 | static int | |
1617 | mptsas_sas_expander_pg0(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info, | |
1618 | u32 form, u32 form_specific) | |
1619 | { | |
1620 | ConfigExtendedPageHeader_t hdr; | |
1621 | CONFIGPARMS cfg; | |
1622 | SasExpanderPage0_t *buffer; | |
1623 | dma_addr_t dma_handle; | |
547f9a21 | 1624 | int i, error; |
0c33b27d CH |
1625 | |
1626 | hdr.PageVersion = MPI_SASEXPANDER0_PAGEVERSION; | |
1627 | hdr.ExtPageLength = 0; | |
1628 | hdr.PageNumber = 0; | |
1629 | hdr.Reserved1 = 0; | |
1630 | hdr.Reserved2 = 0; | |
1631 | hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED; | |
1632 | hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_EXPANDER; | |
1633 | ||
1634 | cfg.cfghdr.ehdr = &hdr; | |
1635 | cfg.physAddr = -1; | |
1636 | cfg.pageAddr = form + form_specific; | |
1637 | cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; | |
1638 | cfg.dir = 0; /* read */ | |
1639 | cfg.timeout = 10; | |
1640 | ||
db9c9174 | 1641 | memset(port_info, 0, sizeof(struct mptsas_portinfo)); |
0c33b27d CH |
1642 | error = mpt_config(ioc, &cfg); |
1643 | if (error) | |
1644 | goto out; | |
1645 | ||
1646 | if (!hdr.ExtPageLength) { | |
1647 | error = -ENXIO; | |
1648 | goto out; | |
1649 | } | |
1650 | ||
1651 | buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4, | |
1652 | &dma_handle); | |
1653 | if (!buffer) { | |
1654 | error = -ENOMEM; | |
1655 | goto out; | |
1656 | } | |
1657 | ||
1658 | cfg.physAddr = dma_handle; | |
1659 | cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; | |
1660 | ||
1661 | error = mpt_config(ioc, &cfg); | |
1662 | if (error) | |
1663 | goto out_free_consistent; | |
1664 | ||
1665 | /* save config data */ | |
1666 | port_info->num_phys = buffer->NumPhys; | |
0c33b27d | 1667 | port_info->phy_info = kcalloc(port_info->num_phys, |
547f9a21 | 1668 | sizeof(*port_info->phy_info),GFP_KERNEL); |
0c33b27d CH |
1669 | if (!port_info->phy_info) { |
1670 | error = -ENOMEM; | |
1671 | goto out_free_consistent; | |
1672 | } | |
1673 | ||
2ecce492 | 1674 | for (i = 0; i < port_info->num_phys; i++) { |
547f9a21 | 1675 | port_info->phy_info[i].portinfo = port_info; |
2ecce492 EM |
1676 | port_info->phy_info[i].handle = |
1677 | le16_to_cpu(buffer->DevHandle); | |
1678 | } | |
547f9a21 | 1679 | |
0c33b27d CH |
1680 | out_free_consistent: |
1681 | pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4, | |
1682 | buffer, dma_handle); | |
1683 | out: | |
1684 | return error; | |
1685 | } | |
1686 | ||
1687 | static int | |
1688 | mptsas_sas_expander_pg1(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info, | |
1689 | u32 form, u32 form_specific) | |
1690 | { | |
1691 | ConfigExtendedPageHeader_t hdr; | |
1692 | CONFIGPARMS cfg; | |
1693 | SasExpanderPage1_t *buffer; | |
1694 | dma_addr_t dma_handle; | |
bd23e94c ME |
1695 | int error=0; |
1696 | ||
1697 | if (ioc->sas_discovery_runtime && | |
1698 | mptsas_is_end_device(&phy_info->attached)) | |
1699 | goto out; | |
0c33b27d CH |
1700 | |
1701 | hdr.PageVersion = MPI_SASEXPANDER0_PAGEVERSION; | |
1702 | hdr.ExtPageLength = 0; | |
1703 | hdr.PageNumber = 1; | |
1704 | hdr.Reserved1 = 0; | |
1705 | hdr.Reserved2 = 0; | |
1706 | hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED; | |
1707 | hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_EXPANDER; | |
1708 | ||
1709 | cfg.cfghdr.ehdr = &hdr; | |
1710 | cfg.physAddr = -1; | |
1711 | cfg.pageAddr = form + form_specific; | |
1712 | cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; | |
1713 | cfg.dir = 0; /* read */ | |
1714 | cfg.timeout = 10; | |
1715 | ||
1716 | error = mpt_config(ioc, &cfg); | |
1717 | if (error) | |
1718 | goto out; | |
1719 | ||
1720 | if (!hdr.ExtPageLength) { | |
1721 | error = -ENXIO; | |
1722 | goto out; | |
1723 | } | |
1724 | ||
1725 | buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4, | |
1726 | &dma_handle); | |
1727 | if (!buffer) { | |
1728 | error = -ENOMEM; | |
1729 | goto out; | |
1730 | } | |
1731 | ||
1732 | cfg.physAddr = dma_handle; | |
1733 | cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; | |
1734 | ||
1735 | error = mpt_config(ioc, &cfg); | |
1736 | if (error) | |
1737 | goto out_free_consistent; | |
1738 | ||
1739 | ||
1740 | mptsas_print_expander_pg1(buffer); | |
1741 | ||
1742 | /* save config data */ | |
024358ee | 1743 | phy_info->phy_id = buffer->PhyIdentifier; |
0c33b27d CH |
1744 | phy_info->port_id = buffer->PhysicalPort; |
1745 | phy_info->negotiated_link_rate = buffer->NegotiatedLinkRate; | |
1746 | phy_info->programmed_link_rate = buffer->ProgrammedLinkRate; | |
1747 | phy_info->hw_link_rate = buffer->HwLinkRate; | |
1748 | phy_info->identify.handle = le16_to_cpu(buffer->OwnerDevHandle); | |
1749 | phy_info->attached.handle = le16_to_cpu(buffer->AttachedDevHandle); | |
1750 | ||
0c33b27d CH |
1751 | out_free_consistent: |
1752 | pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4, | |
1753 | buffer, dma_handle); | |
1754 | out: | |
1755 | return error; | |
1756 | } | |
1757 | ||
1758 | static void | |
1759 | mptsas_parse_device_info(struct sas_identify *identify, | |
1760 | struct mptsas_devinfo *device_info) | |
1761 | { | |
1762 | u16 protocols; | |
1763 | ||
1764 | identify->sas_address = device_info->sas_address; | |
1765 | identify->phy_identifier = device_info->phy_id; | |
1766 | ||
1767 | /* | |
1768 | * Fill in Phy Initiator Port Protocol. | |
1769 | * Bits 6:3, more than one bit can be set, fall through cases. | |
1770 | */ | |
1771 | protocols = device_info->device_info & 0x78; | |
1772 | identify->initiator_port_protocols = 0; | |
1773 | if (protocols & MPI_SAS_DEVICE_INFO_SSP_INITIATOR) | |
1774 | identify->initiator_port_protocols |= SAS_PROTOCOL_SSP; | |
1775 | if (protocols & MPI_SAS_DEVICE_INFO_STP_INITIATOR) | |
1776 | identify->initiator_port_protocols |= SAS_PROTOCOL_STP; | |
1777 | if (protocols & MPI_SAS_DEVICE_INFO_SMP_INITIATOR) | |
1778 | identify->initiator_port_protocols |= SAS_PROTOCOL_SMP; | |
1779 | if (protocols & MPI_SAS_DEVICE_INFO_SATA_HOST) | |
1780 | identify->initiator_port_protocols |= SAS_PROTOCOL_SATA; | |
1781 | ||
1782 | /* | |
1783 | * Fill in Phy Target Port Protocol. | |
1784 | * Bits 10:7, more than one bit can be set, fall through cases. | |
1785 | */ | |
1786 | protocols = device_info->device_info & 0x780; | |
1787 | identify->target_port_protocols = 0; | |
1788 | if (protocols & MPI_SAS_DEVICE_INFO_SSP_TARGET) | |
1789 | identify->target_port_protocols |= SAS_PROTOCOL_SSP; | |
1790 | if (protocols & MPI_SAS_DEVICE_INFO_STP_TARGET) | |
1791 | identify->target_port_protocols |= SAS_PROTOCOL_STP; | |
1792 | if (protocols & MPI_SAS_DEVICE_INFO_SMP_TARGET) | |
1793 | identify->target_port_protocols |= SAS_PROTOCOL_SMP; | |
1794 | if (protocols & MPI_SAS_DEVICE_INFO_SATA_DEVICE) | |
1795 | identify->target_port_protocols |= SAS_PROTOCOL_SATA; | |
1796 | ||
1797 | /* | |
1798 | * Fill in Attached device type. | |
1799 | */ | |
1800 | switch (device_info->device_info & | |
1801 | MPI_SAS_DEVICE_INFO_MASK_DEVICE_TYPE) { | |
1802 | case MPI_SAS_DEVICE_INFO_NO_DEVICE: | |
1803 | identify->device_type = SAS_PHY_UNUSED; | |
1804 | break; | |
1805 | case MPI_SAS_DEVICE_INFO_END_DEVICE: | |
1806 | identify->device_type = SAS_END_DEVICE; | |
1807 | break; | |
1808 | case MPI_SAS_DEVICE_INFO_EDGE_EXPANDER: | |
1809 | identify->device_type = SAS_EDGE_EXPANDER_DEVICE; | |
1810 | break; | |
1811 | case MPI_SAS_DEVICE_INFO_FANOUT_EXPANDER: | |
1812 | identify->device_type = SAS_FANOUT_EXPANDER_DEVICE; | |
1813 | break; | |
1814 | } | |
1815 | } | |
1816 | ||
1817 | static int mptsas_probe_one_phy(struct device *dev, | |
ac01bbbd | 1818 | struct mptsas_phyinfo *phy_info, int index, int local) |
0c33b27d | 1819 | { |
e6b2d76a | 1820 | MPT_ADAPTER *ioc; |
9a28f49a | 1821 | struct sas_phy *phy; |
547f9a21 EM |
1822 | struct sas_port *port; |
1823 | int error = 0; | |
0c33b27d | 1824 | |
547f9a21 EM |
1825 | if (!dev) { |
1826 | error = -ENODEV; | |
1827 | goto out; | |
1828 | } | |
e6b2d76a ME |
1829 | |
1830 | if (!phy_info->phy) { | |
1831 | phy = sas_phy_alloc(dev, index); | |
547f9a21 EM |
1832 | if (!phy) { |
1833 | error = -ENOMEM; | |
1834 | goto out; | |
1835 | } | |
e6b2d76a ME |
1836 | } else |
1837 | phy = phy_info->phy; | |
0c33b27d | 1838 | |
9a28f49a | 1839 | mptsas_parse_device_info(&phy->identify, &phy_info->identify); |
0c33b27d CH |
1840 | |
1841 | /* | |
1842 | * Set Negotiated link rate. | |
1843 | */ | |
1844 | switch (phy_info->negotiated_link_rate) { | |
1845 | case MPI_SAS_IOUNIT0_RATE_PHY_DISABLED: | |
9a28f49a | 1846 | phy->negotiated_linkrate = SAS_PHY_DISABLED; |
0c33b27d CH |
1847 | break; |
1848 | case MPI_SAS_IOUNIT0_RATE_FAILED_SPEED_NEGOTIATION: | |
9a28f49a | 1849 | phy->negotiated_linkrate = SAS_LINK_RATE_FAILED; |
0c33b27d CH |
1850 | break; |
1851 | case MPI_SAS_IOUNIT0_RATE_1_5: | |
9a28f49a | 1852 | phy->negotiated_linkrate = SAS_LINK_RATE_1_5_GBPS; |
0c33b27d CH |
1853 | break; |
1854 | case MPI_SAS_IOUNIT0_RATE_3_0: | |
9a28f49a | 1855 | phy->negotiated_linkrate = SAS_LINK_RATE_3_0_GBPS; |
0c33b27d CH |
1856 | break; |
1857 | case MPI_SAS_IOUNIT0_RATE_SATA_OOB_COMPLETE: | |
1858 | case MPI_SAS_IOUNIT0_RATE_UNKNOWN: | |
1859 | default: | |
9a28f49a | 1860 | phy->negotiated_linkrate = SAS_LINK_RATE_UNKNOWN; |
0c33b27d CH |
1861 | break; |
1862 | } | |
1863 | ||
1864 | /* | |
1865 | * Set Max hardware link rate. | |
1866 | */ | |
1867 | switch (phy_info->hw_link_rate & MPI_SAS_PHY0_PRATE_MAX_RATE_MASK) { | |
1868 | case MPI_SAS_PHY0_HWRATE_MAX_RATE_1_5: | |
9a28f49a | 1869 | phy->maximum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS; |
0c33b27d CH |
1870 | break; |
1871 | case MPI_SAS_PHY0_PRATE_MAX_RATE_3_0: | |
9a28f49a | 1872 | phy->maximum_linkrate_hw = SAS_LINK_RATE_3_0_GBPS; |
0c33b27d CH |
1873 | break; |
1874 | default: | |
1875 | break; | |
1876 | } | |
1877 | ||
1878 | /* | |
1879 | * Set Max programmed link rate. | |
1880 | */ | |
1881 | switch (phy_info->programmed_link_rate & | |
1882 | MPI_SAS_PHY0_PRATE_MAX_RATE_MASK) { | |
1883 | case MPI_SAS_PHY0_PRATE_MAX_RATE_1_5: | |
9a28f49a | 1884 | phy->maximum_linkrate = SAS_LINK_RATE_1_5_GBPS; |
0c33b27d CH |
1885 | break; |
1886 | case MPI_SAS_PHY0_PRATE_MAX_RATE_3_0: | |
9a28f49a | 1887 | phy->maximum_linkrate = SAS_LINK_RATE_3_0_GBPS; |
0c33b27d CH |
1888 | break; |
1889 | default: | |
1890 | break; | |
1891 | } | |
1892 | ||
1893 | /* | |
1894 | * Set Min hardware link rate. | |
1895 | */ | |
1896 | switch (phy_info->hw_link_rate & MPI_SAS_PHY0_HWRATE_MIN_RATE_MASK) { | |
1897 | case MPI_SAS_PHY0_HWRATE_MIN_RATE_1_5: | |
9a28f49a | 1898 | phy->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS; |
0c33b27d CH |
1899 | break; |
1900 | case MPI_SAS_PHY0_PRATE_MIN_RATE_3_0: | |
9a28f49a | 1901 | phy->minimum_linkrate_hw = SAS_LINK_RATE_3_0_GBPS; |
0c33b27d CH |
1902 | break; |
1903 | default: | |
1904 | break; | |
1905 | } | |
1906 | ||
1907 | /* | |
1908 | * Set Min programmed link rate. | |
1909 | */ | |
1910 | switch (phy_info->programmed_link_rate & | |
1911 | MPI_SAS_PHY0_PRATE_MIN_RATE_MASK) { | |
1912 | case MPI_SAS_PHY0_PRATE_MIN_RATE_1_5: | |
9a28f49a | 1913 | phy->minimum_linkrate = SAS_LINK_RATE_1_5_GBPS; |
0c33b27d CH |
1914 | break; |
1915 | case MPI_SAS_PHY0_PRATE_MIN_RATE_3_0: | |
9a28f49a | 1916 | phy->minimum_linkrate = SAS_LINK_RATE_3_0_GBPS; |
0c33b27d CH |
1917 | break; |
1918 | default: | |
1919 | break; | |
1920 | } | |
1921 | ||
e6b2d76a | 1922 | if (!phy_info->phy) { |
ac01bbbd | 1923 | |
e6b2d76a ME |
1924 | error = sas_phy_add(phy); |
1925 | if (error) { | |
1926 | sas_phy_free(phy); | |
547f9a21 | 1927 | goto out; |
e6b2d76a ME |
1928 | } |
1929 | phy_info->phy = phy; | |
0c33b27d CH |
1930 | } |
1931 | ||
547f9a21 EM |
1932 | if (!phy_info->attached.handle || |
1933 | !phy_info->port_details) | |
1934 | goto out; | |
1935 | ||
1936 | port = mptsas_get_port(phy_info); | |
1937 | ioc = phy_to_ioc(phy_info->phy); | |
1938 | ||
1939 | if (phy_info->sas_port_add_phy) { | |
1940 | ||
1941 | if (!port) { | |
dc22f16d | 1942 | port = sas_port_alloc_num(dev); |
547f9a21 EM |
1943 | if (!port) { |
1944 | error = -ENOMEM; | |
1945 | goto out; | |
1946 | } | |
1947 | error = sas_port_add(port); | |
1948 | if (error) { | |
1949 | dfailprintk((MYIOC_s_ERR_FMT | |
1950 | "%s: exit at line=%d\n", ioc->name, | |
1951 | __FUNCTION__, __LINE__)); | |
1952 | goto out; | |
1953 | } | |
1954 | mptsas_set_port(phy_info, port); | |
dc22f16d EM |
1955 | dsaswideprintk((KERN_DEBUG |
1956 | "sas_port_alloc: port=%p dev=%p port_id=%d\n", | |
1957 | port, dev, port->port_identifier)); | |
547f9a21 EM |
1958 | } |
1959 | dsaswideprintk((KERN_DEBUG "sas_port_add_phy: phy_id=%d\n", | |
1960 | phy_info->phy_id)); | |
1961 | sas_port_add_phy(port, phy_info->phy); | |
1962 | phy_info->sas_port_add_phy = 0; | |
1963 | } | |
1964 | ||
1965 | if (!mptsas_get_rphy(phy_info) && port && !port->rphy) { | |
e6b2d76a | 1966 | |
0c33b27d | 1967 | struct sas_rphy *rphy; |
2686de27 | 1968 | struct device *parent; |
f013db32 | 1969 | struct sas_identify identify; |
0c33b27d | 1970 | |
2686de27 | 1971 | parent = dev->parent->parent; |
e6b2d76a ME |
1972 | /* |
1973 | * Let the hotplug_work thread handle processing | |
1974 | * the adding/removing of devices that occur | |
1975 | * after start of day. | |
1976 | */ | |
1977 | if (ioc->sas_discovery_runtime && | |
1978 | mptsas_is_end_device(&phy_info->attached)) | |
547f9a21 | 1979 | goto out; |
e6b2d76a | 1980 | |
f013db32 | 1981 | mptsas_parse_device_info(&identify, &phy_info->attached); |
2686de27 JB |
1982 | if (scsi_is_host_device(parent)) { |
1983 | struct mptsas_portinfo *port_info; | |
1984 | int i; | |
1985 | ||
1986 | mutex_lock(&ioc->sas_topology_mutex); | |
1987 | port_info = mptsas_find_portinfo_by_handle(ioc, | |
1988 | ioc->handle); | |
1989 | mutex_unlock(&ioc->sas_topology_mutex); | |
1990 | ||
1991 | for (i = 0; i < port_info->num_phys; i++) | |
1992 | if (port_info->phy_info[i].identify.sas_address == | |
0c269e6d JB |
1993 | identify.sas_address) { |
1994 | sas_port_mark_backlink(port); | |
2686de27 | 1995 | goto out; |
0c269e6d | 1996 | } |
2686de27 JB |
1997 | |
1998 | } else if (scsi_is_sas_rphy(parent)) { | |
1999 | struct sas_rphy *parent_rphy = dev_to_rphy(parent); | |
2000 | if (identify.sas_address == | |
0c269e6d JB |
2001 | parent_rphy->identify.sas_address) { |
2002 | sas_port_mark_backlink(port); | |
2686de27 | 2003 | goto out; |
0c269e6d | 2004 | } |
2686de27 JB |
2005 | } |
2006 | ||
f013db32 JB |
2007 | switch (identify.device_type) { |
2008 | case SAS_END_DEVICE: | |
547f9a21 | 2009 | rphy = sas_end_device_alloc(port); |
f013db32 JB |
2010 | break; |
2011 | case SAS_EDGE_EXPANDER_DEVICE: | |
2012 | case SAS_FANOUT_EXPANDER_DEVICE: | |
547f9a21 | 2013 | rphy = sas_expander_alloc(port, identify.device_type); |
f013db32 JB |
2014 | break; |
2015 | default: | |
2016 | rphy = NULL; | |
2017 | break; | |
2018 | } | |
547f9a21 EM |
2019 | if (!rphy) { |
2020 | dfailprintk((MYIOC_s_ERR_FMT | |
2021 | "%s: exit at line=%d\n", ioc->name, | |
2022 | __FUNCTION__, __LINE__)); | |
2023 | goto out; | |
2024 | } | |
0c33b27d | 2025 | |
f013db32 | 2026 | rphy->identify = identify; |
0c33b27d CH |
2027 | error = sas_rphy_add(rphy); |
2028 | if (error) { | |
547f9a21 EM |
2029 | dfailprintk((MYIOC_s_ERR_FMT |
2030 | "%s: exit at line=%d\n", ioc->name, | |
2031 | __FUNCTION__, __LINE__)); | |
0c33b27d | 2032 | sas_rphy_free(rphy); |
547f9a21 | 2033 | goto out; |
0c33b27d | 2034 | } |
547f9a21 | 2035 | mptsas_set_rphy(phy_info, rphy); |
0c33b27d CH |
2036 | } |
2037 | ||
547f9a21 EM |
2038 | out: |
2039 | return error; | |
0c33b27d CH |
2040 | } |
2041 | ||
2042 | static int | |
e6b2d76a | 2043 | mptsas_probe_hba_phys(MPT_ADAPTER *ioc) |
0c33b27d | 2044 | { |
e6b2d76a | 2045 | struct mptsas_portinfo *port_info, *hba; |
0c33b27d CH |
2046 | int error = -ENOMEM, i; |
2047 | ||
e6b2d76a ME |
2048 | hba = kzalloc(sizeof(*port_info), GFP_KERNEL); |
2049 | if (! hba) | |
0c33b27d | 2050 | goto out; |
0c33b27d | 2051 | |
e6b2d76a | 2052 | error = mptsas_sas_io_unit_pg0(ioc, hba); |
0c33b27d CH |
2053 | if (error) |
2054 | goto out_free_port_info; | |
2055 | ||
edb9068d | 2056 | mptsas_sas_io_unit_pg1(ioc); |
9a28f49a | 2057 | mutex_lock(&ioc->sas_topology_mutex); |
2ecce492 EM |
2058 | ioc->handle = hba->phy_info[0].handle; |
2059 | port_info = mptsas_find_portinfo_by_handle(ioc, ioc->handle); | |
e6b2d76a ME |
2060 | if (!port_info) { |
2061 | port_info = hba; | |
2062 | list_add_tail(&port_info->list, &ioc->sas_topology); | |
2063 | } else { | |
2ecce492 | 2064 | for (i = 0; i < hba->num_phys; i++) { |
e6b2d76a ME |
2065 | port_info->phy_info[i].negotiated_link_rate = |
2066 | hba->phy_info[i].negotiated_link_rate; | |
2ecce492 EM |
2067 | port_info->phy_info[i].handle = |
2068 | hba->phy_info[i].handle; | |
2069 | port_info->phy_info[i].port_id = | |
2070 | hba->phy_info[i].port_id; | |
2071 | } | |
547f9a21 | 2072 | kfree(hba->phy_info); |
e6b2d76a ME |
2073 | kfree(hba); |
2074 | hba = NULL; | |
2075 | } | |
9a28f49a | 2076 | mutex_unlock(&ioc->sas_topology_mutex); |
0c33b27d CH |
2077 | for (i = 0; i < port_info->num_phys; i++) { |
2078 | mptsas_sas_phy_pg0(ioc, &port_info->phy_info[i], | |
2079 | (MPI_SAS_PHY_PGAD_FORM_PHY_NUMBER << | |
2080 | MPI_SAS_PHY_PGAD_FORM_SHIFT), i); | |
2081 | ||
2082 | mptsas_sas_device_pg0(ioc, &port_info->phy_info[i].identify, | |
2ecce492 EM |
2083 | (MPI_SAS_DEVICE_PGAD_FORM_HANDLE << |
2084 | MPI_SAS_DEVICE_PGAD_FORM_SHIFT), | |
2085 | port_info->phy_info[i].handle); | |
024358ee | 2086 | port_info->phy_info[i].identify.phy_id = |
2ecce492 | 2087 | port_info->phy_info[i].phy_id = i; |
547f9a21 | 2088 | if (port_info->phy_info[i].attached.handle) |
0c33b27d CH |
2089 | mptsas_sas_device_pg0(ioc, |
2090 | &port_info->phy_info[i].attached, | |
2091 | (MPI_SAS_DEVICE_PGAD_FORM_HANDLE << | |
2092 | MPI_SAS_DEVICE_PGAD_FORM_SHIFT), | |
2093 | port_info->phy_info[i].attached.handle); | |
547f9a21 | 2094 | } |
0c33b27d | 2095 | |
547f9a21 EM |
2096 | mptsas_setup_wide_ports(ioc, port_info); |
2097 | ||
2098 | for (i = 0; i < port_info->num_phys; i++, ioc->sas_index++) | |
0c33b27d | 2099 | mptsas_probe_one_phy(&ioc->sh->shost_gendev, |
e6b2d76a | 2100 | &port_info->phy_info[i], ioc->sas_index, 1); |
0c33b27d CH |
2101 | |
2102 | return 0; | |
2103 | ||
2104 | out_free_port_info: | |
547f9a21 | 2105 | kfree(hba); |
0c33b27d CH |
2106 | out: |
2107 | return error; | |
2108 | } | |
2109 | ||
2110 | static int | |
e6b2d76a | 2111 | mptsas_probe_expander_phys(MPT_ADAPTER *ioc, u32 *handle) |
0c33b27d | 2112 | { |
e6b2d76a | 2113 | struct mptsas_portinfo *port_info, *p, *ex; |
547f9a21 EM |
2114 | struct device *parent; |
2115 | struct sas_rphy *rphy; | |
0c33b27d CH |
2116 | int error = -ENOMEM, i, j; |
2117 | ||
e6b2d76a ME |
2118 | ex = kzalloc(sizeof(*port_info), GFP_KERNEL); |
2119 | if (!ex) | |
0c33b27d | 2120 | goto out; |
0c33b27d | 2121 | |
e6b2d76a | 2122 | error = mptsas_sas_expander_pg0(ioc, ex, |
2ecce492 EM |
2123 | (MPI_SAS_EXPAND_PGAD_FORM_GET_NEXT_HANDLE << |
2124 | MPI_SAS_EXPAND_PGAD_FORM_SHIFT), *handle); | |
0c33b27d CH |
2125 | if (error) |
2126 | goto out_free_port_info; | |
2127 | ||
2ecce492 | 2128 | *handle = ex->phy_info[0].handle; |
0c33b27d | 2129 | |
9a28f49a | 2130 | mutex_lock(&ioc->sas_topology_mutex); |
e6b2d76a ME |
2131 | port_info = mptsas_find_portinfo_by_handle(ioc, *handle); |
2132 | if (!port_info) { | |
2133 | port_info = ex; | |
2134 | list_add_tail(&port_info->list, &ioc->sas_topology); | |
2135 | } else { | |
2ecce492 EM |
2136 | for (i = 0; i < ex->num_phys; i++) { |
2137 | port_info->phy_info[i].handle = | |
2138 | ex->phy_info[i].handle; | |
2139 | port_info->phy_info[i].port_id = | |
2140 | ex->phy_info[i].port_id; | |
2141 | } | |
547f9a21 | 2142 | kfree(ex->phy_info); |
e6b2d76a ME |
2143 | kfree(ex); |
2144 | ex = NULL; | |
2145 | } | |
9a28f49a CH |
2146 | mutex_unlock(&ioc->sas_topology_mutex); |
2147 | ||
0c33b27d | 2148 | for (i = 0; i < port_info->num_phys; i++) { |
0c33b27d CH |
2149 | mptsas_sas_expander_pg1(ioc, &port_info->phy_info[i], |
2150 | (MPI_SAS_EXPAND_PGAD_FORM_HANDLE_PHY_NUM << | |
2151 | MPI_SAS_EXPAND_PGAD_FORM_SHIFT), (i << 16) + *handle); | |
2152 | ||
2153 | if (port_info->phy_info[i].identify.handle) { | |
2154 | mptsas_sas_device_pg0(ioc, | |
2155 | &port_info->phy_info[i].identify, | |
2156 | (MPI_SAS_DEVICE_PGAD_FORM_HANDLE << | |
2157 | MPI_SAS_DEVICE_PGAD_FORM_SHIFT), | |
2158 | port_info->phy_info[i].identify.handle); | |
024358ee EM |
2159 | port_info->phy_info[i].identify.phy_id = |
2160 | port_info->phy_info[i].phy_id; | |
0c33b27d CH |
2161 | } |
2162 | ||
2163 | if (port_info->phy_info[i].attached.handle) { | |
2164 | mptsas_sas_device_pg0(ioc, | |
2165 | &port_info->phy_info[i].attached, | |
2166 | (MPI_SAS_DEVICE_PGAD_FORM_HANDLE << | |
2167 | MPI_SAS_DEVICE_PGAD_FORM_SHIFT), | |
2168 | port_info->phy_info[i].attached.handle); | |
db9c9174 ME |
2169 | port_info->phy_info[i].attached.phy_id = |
2170 | port_info->phy_info[i].phy_id; | |
0c33b27d | 2171 | } |
547f9a21 | 2172 | } |
0c33b27d | 2173 | |
547f9a21 EM |
2174 | parent = &ioc->sh->shost_gendev; |
2175 | for (i = 0; i < port_info->num_phys; i++) { | |
9a28f49a | 2176 | mutex_lock(&ioc->sas_topology_mutex); |
0c33b27d CH |
2177 | list_for_each_entry(p, &ioc->sas_topology, list) { |
2178 | for (j = 0; j < p->num_phys; j++) { | |
547f9a21 | 2179 | if (port_info->phy_info[i].identify.handle != |
0c33b27d | 2180 | p->phy_info[j].attached.handle) |
547f9a21 EM |
2181 | continue; |
2182 | rphy = mptsas_get_rphy(&p->phy_info[j]); | |
2183 | parent = &rphy->dev; | |
0c33b27d CH |
2184 | } |
2185 | } | |
9a28f49a | 2186 | mutex_unlock(&ioc->sas_topology_mutex); |
547f9a21 EM |
2187 | } |
2188 | ||
2189 | mptsas_setup_wide_ports(ioc, port_info); | |
0c33b27d | 2190 | |
547f9a21 | 2191 | for (i = 0; i < port_info->num_phys; i++, ioc->sas_index++) |
ac01bbbd | 2192 | mptsas_probe_one_phy(parent, &port_info->phy_info[i], |
e6b2d76a | 2193 | ioc->sas_index, 0); |
0c33b27d CH |
2194 | |
2195 | return 0; | |
2196 | ||
2197 | out_free_port_info: | |
e6b2d76a | 2198 | if (ex) { |
547f9a21 | 2199 | kfree(ex->phy_info); |
e6b2d76a ME |
2200 | kfree(ex); |
2201 | } | |
0c33b27d CH |
2202 | out: |
2203 | return error; | |
2204 | } | |
2205 | ||
e6b2d76a ME |
2206 | /* |
2207 | * mptsas_delete_expander_phys | |
2208 | * | |
2209 | * | |
2210 | * This will traverse topology, and remove expanders | |
2211 | * that are no longer present | |
2212 | */ | |
2213 | static void | |
2214 | mptsas_delete_expander_phys(MPT_ADAPTER *ioc) | |
2215 | { | |
2216 | struct mptsas_portinfo buffer; | |
2217 | struct mptsas_portinfo *port_info, *n, *parent; | |
547f9a21 | 2218 | struct mptsas_phyinfo *phy_info; |
547f9a21 | 2219 | struct sas_port * port; |
e6b2d76a | 2220 | int i; |
547f9a21 | 2221 | u64 expander_sas_address; |
e6b2d76a ME |
2222 | |
2223 | mutex_lock(&ioc->sas_topology_mutex); | |
2224 | list_for_each_entry_safe(port_info, n, &ioc->sas_topology, list) { | |
2225 | ||
2226 | if (port_info->phy_info && | |
2227 | (!(port_info->phy_info[0].identify.device_info & | |
2228 | MPI_SAS_DEVICE_INFO_SMP_TARGET))) | |
2229 | continue; | |
2230 | ||
2231 | if (mptsas_sas_expander_pg0(ioc, &buffer, | |
2232 | (MPI_SAS_EXPAND_PGAD_FORM_HANDLE << | |
2ecce492 EM |
2233 | MPI_SAS_EXPAND_PGAD_FORM_SHIFT), |
2234 | port_info->phy_info[0].handle)) { | |
e6b2d76a ME |
2235 | |
2236 | /* | |
2237 | * Obtain the port_info instance to the parent port | |
2238 | */ | |
2239 | parent = mptsas_find_portinfo_by_handle(ioc, | |
2240 | port_info->phy_info[0].identify.handle_parent); | |
2241 | ||
2242 | if (!parent) | |
2243 | goto next_port; | |
2244 | ||
547f9a21 EM |
2245 | expander_sas_address = |
2246 | port_info->phy_info[0].identify.sas_address; | |
2247 | ||
e6b2d76a ME |
2248 | /* |
2249 | * Delete rphys in the parent that point | |
2250 | * to this expander. The transport layer will | |
2251 | * cleanup all the children. | |
2252 | */ | |
547f9a21 EM |
2253 | phy_info = parent->phy_info; |
2254 | for (i = 0; i < parent->num_phys; i++, phy_info++) { | |
2255 | port = mptsas_get_port(phy_info); | |
2256 | if (!port) | |
2257 | continue; | |
2258 | if (phy_info->attached.sas_address != | |
2259 | expander_sas_address) | |
e6b2d76a | 2260 | continue; |
547f9a21 | 2261 | #ifdef MPT_DEBUG_SAS_WIDE |
dc22f16d EM |
2262 | dev_printk(KERN_DEBUG, &port->dev, |
2263 | "delete port (%d)\n", port->port_identifier); | |
547f9a21 EM |
2264 | #endif |
2265 | sas_port_delete(port); | |
2266 | mptsas_port_delete(phy_info->port_details); | |
e6b2d76a ME |
2267 | } |
2268 | next_port: | |
547f9a21 EM |
2269 | |
2270 | phy_info = port_info->phy_info; | |
2271 | for (i = 0; i < port_info->num_phys; i++, phy_info++) | |
2272 | mptsas_port_delete(phy_info->port_details); | |
2273 | ||
e6b2d76a | 2274 | list_del(&port_info->list); |
547f9a21 | 2275 | kfree(port_info->phy_info); |
e6b2d76a ME |
2276 | kfree(port_info); |
2277 | } | |
2278 | /* | |
2279 | * Free this memory allocated from inside | |
2280 | * mptsas_sas_expander_pg0 | |
2281 | */ | |
547f9a21 | 2282 | kfree(buffer.phy_info); |
e6b2d76a ME |
2283 | } |
2284 | mutex_unlock(&ioc->sas_topology_mutex); | |
2285 | } | |
2286 | ||
2287 | /* | |
2288 | * Start of day discovery | |
2289 | */ | |
0c33b27d CH |
2290 | static void |
2291 | mptsas_scan_sas_topology(MPT_ADAPTER *ioc) | |
2292 | { | |
2293 | u32 handle = 0xFFFF; | |
f44e5461 | 2294 | int i; |
0c33b27d | 2295 | |
e6b2d76a ME |
2296 | mutex_lock(&ioc->sas_discovery_mutex); |
2297 | mptsas_probe_hba_phys(ioc); | |
2298 | while (!mptsas_probe_expander_phys(ioc, &handle)) | |
0c33b27d | 2299 | ; |
f44e5461 ME |
2300 | /* |
2301 | Reporting RAID volumes. | |
2302 | */ | |
b506ade9 EM |
2303 | if (!ioc->ir_firmware) |
2304 | goto out; | |
f44e5461 ME |
2305 | if (!ioc->raid_data.pIocPg2) |
2306 | goto out; | |
2307 | if (!ioc->raid_data.pIocPg2->NumActiveVolumes) | |
2308 | goto out; | |
793955f5 | 2309 | for (i = 0; i < ioc->raid_data.pIocPg2->NumActiveVolumes; i++) { |
e8bf3941 | 2310 | scsi_add_device(ioc->sh, MPTSAS_RAID_CHANNEL, |
f44e5461 ME |
2311 | ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID, 0); |
2312 | } | |
2313 | out: | |
e6b2d76a ME |
2314 | mutex_unlock(&ioc->sas_discovery_mutex); |
2315 | } | |
2316 | ||
2317 | /* | |
2318 | * Work queue thread to handle Runtime discovery | |
2319 | * Mere purpose is the hot add/delete of expanders | |
547f9a21 | 2320 | *(Mutex UNLOCKED) |
e6b2d76a ME |
2321 | */ |
2322 | static void | |
547f9a21 | 2323 | __mptsas_discovery_work(MPT_ADAPTER *ioc) |
e6b2d76a | 2324 | { |
e6b2d76a ME |
2325 | u32 handle = 0xFFFF; |
2326 | ||
e6b2d76a ME |
2327 | ioc->sas_discovery_runtime=1; |
2328 | mptsas_delete_expander_phys(ioc); | |
2329 | mptsas_probe_hba_phys(ioc); | |
2330 | while (!mptsas_probe_expander_phys(ioc, &handle)) | |
2331 | ; | |
e6b2d76a | 2332 | ioc->sas_discovery_runtime=0; |
547f9a21 EM |
2333 | } |
2334 | ||
2335 | /* | |
2336 | * Work queue thread to handle Runtime discovery | |
2337 | * Mere purpose is the hot add/delete of expanders | |
2338 | *(Mutex LOCKED) | |
2339 | */ | |
2340 | static void | |
c4028958 | 2341 | mptsas_discovery_work(struct work_struct *work) |
547f9a21 | 2342 | { |
c4028958 DH |
2343 | struct mptsas_discovery_event *ev = |
2344 | container_of(work, struct mptsas_discovery_event, work); | |
547f9a21 EM |
2345 | MPT_ADAPTER *ioc = ev->ioc; |
2346 | ||
2347 | mutex_lock(&ioc->sas_discovery_mutex); | |
2348 | __mptsas_discovery_work(ioc); | |
e6b2d76a | 2349 | mutex_unlock(&ioc->sas_discovery_mutex); |
547f9a21 | 2350 | kfree(ev); |
0c33b27d CH |
2351 | } |
2352 | ||
9a28f49a | 2353 | static struct mptsas_phyinfo * |
547f9a21 | 2354 | mptsas_find_phyinfo_by_sas_address(MPT_ADAPTER *ioc, u64 sas_address) |
9a28f49a CH |
2355 | { |
2356 | struct mptsas_portinfo *port_info; | |
9a28f49a | 2357 | struct mptsas_phyinfo *phy_info = NULL; |
547f9a21 | 2358 | int i; |
9a28f49a | 2359 | |
9a28f49a CH |
2360 | mutex_lock(&ioc->sas_topology_mutex); |
2361 | list_for_each_entry(port_info, &ioc->sas_topology, list) { | |
2362 | for (i = 0; i < port_info->num_phys; i++) { | |
b506ade9 EM |
2363 | if (!mptsas_is_end_device( |
2364 | &port_info->phy_info[i].attached)) | |
2365 | continue; | |
547f9a21 EM |
2366 | if (port_info->phy_info[i].attached.sas_address |
2367 | != sas_address) | |
2368 | continue; | |
b506ade9 EM |
2369 | phy_info = &port_info->phy_info[i]; |
2370 | break; | |
2371 | } | |
2372 | } | |
2373 | mutex_unlock(&ioc->sas_topology_mutex); | |
2374 | return phy_info; | |
2375 | } | |
2376 | ||
2377 | static struct mptsas_phyinfo * | |
2378 | mptsas_find_phyinfo_by_target(MPT_ADAPTER *ioc, u8 channel, u8 id) | |
2379 | { | |
2380 | struct mptsas_portinfo *port_info; | |
2381 | struct mptsas_phyinfo *phy_info = NULL; | |
2382 | int i; | |
2383 | ||
2384 | mutex_lock(&ioc->sas_topology_mutex); | |
2385 | list_for_each_entry(port_info, &ioc->sas_topology, list) { | |
2386 | for (i = 0; i < port_info->num_phys; i++) { | |
547f9a21 EM |
2387 | if (!mptsas_is_end_device( |
2388 | &port_info->phy_info[i].attached)) | |
2389 | continue; | |
b506ade9 EM |
2390 | if (port_info->phy_info[i].attached.id != id) |
2391 | continue; | |
2392 | if (port_info->phy_info[i].attached.channel != channel) | |
2393 | continue; | |
547f9a21 EM |
2394 | phy_info = &port_info->phy_info[i]; |
2395 | break; | |
9a28f49a CH |
2396 | } |
2397 | } | |
2398 | mutex_unlock(&ioc->sas_topology_mutex); | |
9a28f49a CH |
2399 | return phy_info; |
2400 | } | |
2401 | ||
2402 | static struct mptsas_phyinfo * | |
b506ade9 | 2403 | mptsas_find_phyinfo_by_phys_disk_num(MPT_ADAPTER *ioc, u8 channel, u8 id) |
9a28f49a CH |
2404 | { |
2405 | struct mptsas_portinfo *port_info; | |
2406 | struct mptsas_phyinfo *phy_info = NULL; | |
2407 | int i; | |
2408 | ||
9a28f49a CH |
2409 | mutex_lock(&ioc->sas_topology_mutex); |
2410 | list_for_each_entry(port_info, &ioc->sas_topology, list) { | |
547f9a21 | 2411 | for (i = 0; i < port_info->num_phys; i++) { |
547f9a21 EM |
2412 | if (!mptsas_is_end_device( |
2413 | &port_info->phy_info[i].attached)) | |
2414 | continue; | |
b506ade9 EM |
2415 | if (port_info->phy_info[i].attached.phys_disk_num == ~0) |
2416 | continue; | |
2417 | if (port_info->phy_info[i].attached.phys_disk_num != id) | |
2418 | continue; | |
2419 | if (port_info->phy_info[i].attached.channel != channel) | |
2420 | continue; | |
547f9a21 EM |
2421 | phy_info = &port_info->phy_info[i]; |
2422 | break; | |
2423 | } | |
9a28f49a CH |
2424 | } |
2425 | mutex_unlock(&ioc->sas_topology_mutex); | |
9a28f49a CH |
2426 | return phy_info; |
2427 | } | |
2428 | ||
4b766471 ME |
2429 | /* |
2430 | * Work queue thread to clear the persitency table | |
2431 | */ | |
2432 | static void | |
c4028958 | 2433 | mptsas_persist_clear_table(struct work_struct *work) |
4b766471 | 2434 | { |
c4028958 | 2435 | MPT_ADAPTER *ioc = container_of(work, MPT_ADAPTER, sas_persist_task); |
4b766471 ME |
2436 | |
2437 | mptbase_sas_persist_operation(ioc, MPI_SAS_OP_CLEAR_NOT_PRESENT); | |
2438 | } | |
2439 | ||
f44e5461 ME |
2440 | static void |
2441 | mptsas_reprobe_lun(struct scsi_device *sdev, void *data) | |
2442 | { | |
f99be43b EM |
2443 | int rc; |
2444 | ||
f44e5461 | 2445 | sdev->no_uld_attach = data ? 1 : 0; |
f99be43b | 2446 | rc = scsi_device_reprobe(sdev); |
f44e5461 ME |
2447 | } |
2448 | ||
2449 | static void | |
2450 | mptsas_reprobe_target(struct scsi_target *starget, int uld_attach) | |
2451 | { | |
2452 | starget_for_each_device(starget, uld_attach ? (void *)1 : NULL, | |
2453 | mptsas_reprobe_lun); | |
2454 | } | |
2455 | ||
b506ade9 EM |
2456 | static void |
2457 | mptsas_adding_inactive_raid_components(MPT_ADAPTER *ioc, u8 channel, u8 id) | |
2458 | { | |
2459 | CONFIGPARMS cfg; | |
2460 | ConfigPageHeader_t hdr; | |
2461 | dma_addr_t dma_handle; | |
2462 | pRaidVolumePage0_t buffer = NULL; | |
2463 | RaidPhysDiskPage0_t phys_disk; | |
2464 | int i; | |
2465 | struct mptsas_hotplug_event *ev; | |
2466 | ||
2467 | memset(&cfg, 0 , sizeof(CONFIGPARMS)); | |
2468 | memset(&hdr, 0 , sizeof(ConfigPageHeader_t)); | |
2469 | hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_VOLUME; | |
2470 | cfg.pageAddr = (channel << 8) + id; | |
2471 | cfg.cfghdr.hdr = &hdr; | |
2472 | cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER; | |
2473 | ||
2474 | if (mpt_config(ioc, &cfg) != 0) | |
2475 | goto out; | |
2476 | ||
2477 | if (!hdr.PageLength) | |
2478 | goto out; | |
2479 | ||
2480 | buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4, | |
2481 | &dma_handle); | |
2482 | ||
2483 | if (!buffer) | |
2484 | goto out; | |
2485 | ||
2486 | cfg.physAddr = dma_handle; | |
2487 | cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT; | |
2488 | ||
2489 | if (mpt_config(ioc, &cfg) != 0) | |
2490 | goto out; | |
2491 | ||
2492 | if (!(buffer->VolumeStatus.Flags & | |
2493 | MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE)) | |
2494 | goto out; | |
2495 | ||
2496 | if (!buffer->NumPhysDisks) | |
2497 | goto out; | |
2498 | ||
2499 | for (i = 0; i < buffer->NumPhysDisks; i++) { | |
2500 | ||
2501 | if (mpt_raid_phys_disk_pg0(ioc, | |
2502 | buffer->PhysDisk[i].PhysDiskNum, &phys_disk) != 0) | |
2503 | continue; | |
2504 | ||
2505 | ev = kzalloc(sizeof(*ev), GFP_ATOMIC); | |
2506 | if (!ev) { | |
2507 | printk(KERN_WARNING "mptsas: lost hotplug event\n"); | |
2508 | goto out; | |
2509 | } | |
2510 | ||
2511 | INIT_WORK(&ev->work, mptsas_hotplug_work); | |
2512 | ev->ioc = ioc; | |
2513 | ev->id = phys_disk.PhysDiskID; | |
2514 | ev->channel = phys_disk.PhysDiskBus; | |
2515 | ev->phys_disk_num_valid = 1; | |
2516 | ev->phys_disk_num = phys_disk.PhysDiskNum; | |
2517 | ev->event_type = MPTSAS_ADD_DEVICE; | |
2518 | schedule_work(&ev->work); | |
2519 | } | |
2520 | ||
2521 | out: | |
2522 | if (buffer) | |
2523 | pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer, | |
2524 | dma_handle); | |
2525 | } | |
e6b2d76a ME |
2526 | /* |
2527 | * Work queue thread to handle SAS hotplug events | |
2528 | */ | |
9a28f49a | 2529 | static void |
c4028958 | 2530 | mptsas_hotplug_work(struct work_struct *work) |
9a28f49a | 2531 | { |
c4028958 DH |
2532 | struct mptsas_hotplug_event *ev = |
2533 | container_of(work, struct mptsas_hotplug_event, work); | |
b506ade9 | 2534 | |
9a28f49a CH |
2535 | MPT_ADAPTER *ioc = ev->ioc; |
2536 | struct mptsas_phyinfo *phy_info; | |
2537 | struct sas_rphy *rphy; | |
547f9a21 | 2538 | struct sas_port *port; |
c73787ee | 2539 | struct scsi_device *sdev; |
547f9a21 | 2540 | struct scsi_target * starget; |
f013db32 | 2541 | struct sas_identify identify; |
9a28f49a | 2542 | char *ds = NULL; |
c73787ee | 2543 | struct mptsas_devinfo sas_device; |
f44e5461 | 2544 | VirtTarget *vtarget; |
547f9a21 | 2545 | VirtDevice *vdevice; |
9a28f49a | 2546 | |
547f9a21 | 2547 | mutex_lock(&ioc->sas_discovery_mutex); |
9a28f49a CH |
2548 | switch (ev->event_type) { |
2549 | case MPTSAS_DEL_DEVICE: | |
9a28f49a | 2550 | |
b506ade9 EM |
2551 | phy_info = NULL; |
2552 | if (ev->phys_disk_num_valid) { | |
2553 | if (ev->hidden_raid_component){ | |
2554 | if (mptsas_sas_device_pg0(ioc, &sas_device, | |
2555 | (MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID << | |
2556 | MPI_SAS_DEVICE_PGAD_FORM_SHIFT), | |
2557 | (ev->channel << 8) + ev->id)) { | |
2558 | dfailprintk((MYIOC_s_ERR_FMT | |
2559 | "%s: exit at line=%d\n", ioc->name, | |
2560 | __FUNCTION__, __LINE__)); | |
2561 | break; | |
2562 | } | |
2563 | phy_info = mptsas_find_phyinfo_by_sas_address( | |
2564 | ioc, sas_device.sas_address); | |
2565 | }else | |
2566 | phy_info = mptsas_find_phyinfo_by_phys_disk_num( | |
2567 | ioc, ev->channel, ev->phys_disk_num); | |
2568 | } | |
2569 | ||
2570 | if (!phy_info) | |
2571 | phy_info = mptsas_find_phyinfo_by_target(ioc, | |
2572 | ev->channel, ev->id); | |
e6b2d76a | 2573 | |
f44e5461 ME |
2574 | /* |
2575 | * Sanity checks, for non-existing phys and remote rphys. | |
2576 | */ | |
b506ade9 EM |
2577 | if (!phy_info){ |
2578 | dfailprintk((MYIOC_s_ERR_FMT | |
2579 | "%s: exit at line=%d\n", ioc->name, | |
2580 | __FUNCTION__, __LINE__)); | |
2581 | break; | |
2582 | } | |
2583 | if (!phy_info->port_details) { | |
547f9a21 EM |
2584 | dfailprintk((MYIOC_s_ERR_FMT |
2585 | "%s: exit at line=%d\n", ioc->name, | |
2586 | __FUNCTION__, __LINE__)); | |
9a28f49a | 2587 | break; |
547f9a21 EM |
2588 | } |
2589 | rphy = mptsas_get_rphy(phy_info); | |
2590 | if (!rphy) { | |
2591 | dfailprintk((MYIOC_s_ERR_FMT | |
2592 | "%s: exit at line=%d\n", ioc->name, | |
2593 | __FUNCTION__, __LINE__)); | |
2594 | break; | |
2595 | } | |
b506ade9 | 2596 | |
547f9a21 EM |
2597 | port = mptsas_get_port(phy_info); |
2598 | if (!port) { | |
2599 | dfailprintk((MYIOC_s_ERR_FMT | |
2600 | "%s: exit at line=%d\n", ioc->name, | |
2601 | __FUNCTION__, __LINE__)); | |
f44e5461 | 2602 | break; |
547f9a21 EM |
2603 | } |
2604 | ||
2605 | starget = mptsas_get_starget(phy_info); | |
2606 | if (starget) { | |
2607 | vtarget = starget->hostdata; | |
f44e5461 | 2608 | |
547f9a21 EM |
2609 | if (!vtarget) { |
2610 | dfailprintk((MYIOC_s_ERR_FMT | |
2611 | "%s: exit at line=%d\n", ioc->name, | |
2612 | __FUNCTION__, __LINE__)); | |
f44e5461 | 2613 | break; |
547f9a21 EM |
2614 | } |
2615 | ||
f44e5461 ME |
2616 | /* |
2617 | * Handling RAID components | |
2618 | */ | |
b506ade9 EM |
2619 | if (ev->phys_disk_num_valid && |
2620 | ev->hidden_raid_component) { | |
2621 | printk(MYIOC_s_INFO_FMT | |
2622 | "RAID Hidding: channel=%d, id=%d, " | |
2623 | "physdsk %d \n", ioc->name, ev->channel, | |
2624 | ev->id, ev->phys_disk_num); | |
793955f5 | 2625 | vtarget->id = ev->phys_disk_num; |
b506ade9 EM |
2626 | vtarget->tflags |= |
2627 | MPT_TARGET_FLAGS_RAID_COMPONENT; | |
547f9a21 | 2628 | mptsas_reprobe_target(starget, 1); |
b506ade9 EM |
2629 | phy_info->attached.phys_disk_num = |
2630 | ev->phys_disk_num; | |
2631 | break; | |
f44e5461 | 2632 | } |
9a28f49a CH |
2633 | } |
2634 | ||
b506ade9 EM |
2635 | if (phy_info->attached.device_info & |
2636 | MPI_SAS_DEVICE_INFO_SSP_TARGET) | |
c73787ee | 2637 | ds = "ssp"; |
b506ade9 EM |
2638 | if (phy_info->attached.device_info & |
2639 | MPI_SAS_DEVICE_INFO_STP_TARGET) | |
c73787ee | 2640 | ds = "stp"; |
b506ade9 EM |
2641 | if (phy_info->attached.device_info & |
2642 | MPI_SAS_DEVICE_INFO_SATA_DEVICE) | |
c73787ee ME |
2643 | ds = "sata"; |
2644 | ||
2645 | printk(MYIOC_s_INFO_FMT | |
2646 | "removing %s device, channel %d, id %d, phy %d\n", | |
2647 | ioc->name, ds, ev->channel, ev->id, phy_info->phy_id); | |
547f9a21 | 2648 | #ifdef MPT_DEBUG_SAS_WIDE |
dc22f16d EM |
2649 | dev_printk(KERN_DEBUG, &port->dev, |
2650 | "delete port (%d)\n", port->port_identifier); | |
547f9a21 EM |
2651 | #endif |
2652 | sas_port_delete(port); | |
2653 | mptsas_port_delete(phy_info->port_details); | |
9a28f49a CH |
2654 | break; |
2655 | case MPTSAS_ADD_DEVICE: | |
c73787ee | 2656 | |
bd23e94c ME |
2657 | if (ev->phys_disk_num_valid) |
2658 | mpt_findImVolumes(ioc); | |
2659 | ||
c73787ee | 2660 | /* |
e3094447 | 2661 | * Refresh sas device pg0 data |
c73787ee | 2662 | */ |
e3094447 CH |
2663 | if (mptsas_sas_device_pg0(ioc, &sas_device, |
2664 | (MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID << | |
b506ade9 EM |
2665 | MPI_SAS_DEVICE_PGAD_FORM_SHIFT), |
2666 | (ev->channel << 8) + ev->id)) { | |
547f9a21 EM |
2667 | dfailprintk((MYIOC_s_ERR_FMT |
2668 | "%s: exit at line=%d\n", ioc->name, | |
2669 | __FUNCTION__, __LINE__)); | |
e3094447 | 2670 | break; |
547f9a21 | 2671 | } |
9a28f49a | 2672 | |
547f9a21 | 2673 | __mptsas_discovery_work(ioc); |
e6b2d76a | 2674 | |
547f9a21 EM |
2675 | phy_info = mptsas_find_phyinfo_by_sas_address(ioc, |
2676 | sas_device.sas_address); | |
e6b2d76a | 2677 | |
547f9a21 EM |
2678 | if (!phy_info || !phy_info->port_details) { |
2679 | dfailprintk((MYIOC_s_ERR_FMT | |
2680 | "%s: exit at line=%d\n", ioc->name, | |
2681 | __FUNCTION__, __LINE__)); | |
2682 | break; | |
e6b2d76a ME |
2683 | } |
2684 | ||
547f9a21 | 2685 | starget = mptsas_get_starget(phy_info); |
b506ade9 EM |
2686 | if (starget && (!ev->hidden_raid_component)){ |
2687 | ||
547f9a21 | 2688 | vtarget = starget->hostdata; |
9a28f49a | 2689 | |
547f9a21 EM |
2690 | if (!vtarget) { |
2691 | dfailprintk((MYIOC_s_ERR_FMT | |
2692 | "%s: exit at line=%d\n", ioc->name, | |
2693 | __FUNCTION__, __LINE__)); | |
f44e5461 | 2694 | break; |
547f9a21 | 2695 | } |
f44e5461 ME |
2696 | /* |
2697 | * Handling RAID components | |
2698 | */ | |
2699 | if (vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT) { | |
b506ade9 EM |
2700 | printk(MYIOC_s_INFO_FMT |
2701 | "RAID Exposing: channel=%d, id=%d, " | |
2702 | "physdsk %d \n", ioc->name, ev->channel, | |
2703 | ev->id, ev->phys_disk_num); | |
2704 | vtarget->tflags &= | |
2705 | ~MPT_TARGET_FLAGS_RAID_COMPONENT; | |
793955f5 | 2706 | vtarget->id = ev->id; |
547f9a21 | 2707 | mptsas_reprobe_target(starget, 0); |
b506ade9 | 2708 | phy_info->attached.phys_disk_num = ~0; |
f44e5461 | 2709 | } |
9a28f49a CH |
2710 | break; |
2711 | } | |
2712 | ||
547f9a21 EM |
2713 | if (mptsas_get_rphy(phy_info)) { |
2714 | dfailprintk((MYIOC_s_ERR_FMT | |
2715 | "%s: exit at line=%d\n", ioc->name, | |
2716 | __FUNCTION__, __LINE__)); | |
b506ade9 | 2717 | if (ev->channel) printk("%d\n", __LINE__); |
f44e5461 | 2718 | break; |
547f9a21 | 2719 | } |
b506ade9 | 2720 | |
547f9a21 EM |
2721 | port = mptsas_get_port(phy_info); |
2722 | if (!port) { | |
2723 | dfailprintk((MYIOC_s_ERR_FMT | |
2724 | "%s: exit at line=%d\n", ioc->name, | |
2725 | __FUNCTION__, __LINE__)); | |
2726 | break; | |
2727 | } | |
e3094447 CH |
2728 | memcpy(&phy_info->attached, &sas_device, |
2729 | sizeof(struct mptsas_devinfo)); | |
9a28f49a | 2730 | |
b506ade9 EM |
2731 | if (phy_info->attached.device_info & |
2732 | MPI_SAS_DEVICE_INFO_SSP_TARGET) | |
c73787ee | 2733 | ds = "ssp"; |
b506ade9 EM |
2734 | if (phy_info->attached.device_info & |
2735 | MPI_SAS_DEVICE_INFO_STP_TARGET) | |
c73787ee | 2736 | ds = "stp"; |
b506ade9 EM |
2737 | if (phy_info->attached.device_info & |
2738 | MPI_SAS_DEVICE_INFO_SATA_DEVICE) | |
c73787ee ME |
2739 | ds = "sata"; |
2740 | ||
2741 | printk(MYIOC_s_INFO_FMT | |
2742 | "attaching %s device, channel %d, id %d, phy %d\n", | |
2743 | ioc->name, ds, ev->channel, ev->id, ev->phy_id); | |
2744 | ||
f013db32 | 2745 | mptsas_parse_device_info(&identify, &phy_info->attached); |
547f9a21 EM |
2746 | rphy = sas_end_device_alloc(port); |
2747 | if (!rphy) { | |
2748 | dfailprintk((MYIOC_s_ERR_FMT | |
2749 | "%s: exit at line=%d\n", ioc->name, | |
2750 | __FUNCTION__, __LINE__)); | |
9a28f49a | 2751 | break; /* non-fatal: an rphy can be added later */ |
547f9a21 | 2752 | } |
9a28f49a | 2753 | |
f013db32 | 2754 | rphy->identify = identify; |
9a28f49a | 2755 | if (sas_rphy_add(rphy)) { |
547f9a21 EM |
2756 | dfailprintk((MYIOC_s_ERR_FMT |
2757 | "%s: exit at line=%d\n", ioc->name, | |
2758 | __FUNCTION__, __LINE__)); | |
9a28f49a CH |
2759 | sas_rphy_free(rphy); |
2760 | break; | |
2761 | } | |
547f9a21 | 2762 | mptsas_set_rphy(phy_info, rphy); |
9a28f49a | 2763 | break; |
c73787ee | 2764 | case MPTSAS_ADD_RAID: |
e8bf3941 JB |
2765 | sdev = scsi_device_lookup(ioc->sh, MPTSAS_RAID_CHANNEL, |
2766 | ev->id, 0); | |
c73787ee ME |
2767 | if (sdev) { |
2768 | scsi_device_put(sdev); | |
2769 | break; | |
2770 | } | |
2771 | printk(MYIOC_s_INFO_FMT | |
4b766471 | 2772 | "attaching raid volume, channel %d, id %d\n", |
e8bf3941 JB |
2773 | ioc->name, MPTSAS_RAID_CHANNEL, ev->id); |
2774 | scsi_add_device(ioc->sh, MPTSAS_RAID_CHANNEL, ev->id, 0); | |
c73787ee ME |
2775 | mpt_findImVolumes(ioc); |
2776 | break; | |
2777 | case MPTSAS_DEL_RAID: | |
e8bf3941 | 2778 | sdev = scsi_device_lookup(ioc->sh, MPTSAS_RAID_CHANNEL, |
b506ade9 | 2779 | ev->id, 0); |
c73787ee ME |
2780 | if (!sdev) |
2781 | break; | |
2782 | printk(MYIOC_s_INFO_FMT | |
4b766471 | 2783 | "removing raid volume, channel %d, id %d\n", |
e8bf3941 | 2784 | ioc->name, MPTSAS_RAID_CHANNEL, ev->id); |
b506ade9 | 2785 | vdevice = sdev->hostdata; |
c73787ee ME |
2786 | scsi_remove_device(sdev); |
2787 | scsi_device_put(sdev); | |
2788 | mpt_findImVolumes(ioc); | |
2789 | break; | |
b506ade9 EM |
2790 | case MPTSAS_ADD_INACTIVE_VOLUME: |
2791 | mptsas_adding_inactive_raid_components(ioc, | |
2792 | ev->channel, ev->id); | |
2793 | break; | |
bd23e94c ME |
2794 | case MPTSAS_IGNORE_EVENT: |
2795 | default: | |
2796 | break; | |
9a28f49a CH |
2797 | } |
2798 | ||
e6b2d76a | 2799 | mutex_unlock(&ioc->sas_discovery_mutex); |
547f9a21 | 2800 | kfree(ev); |
9a28f49a CH |
2801 | } |
2802 | ||
2803 | static void | |
547f9a21 | 2804 | mptsas_send_sas_event(MPT_ADAPTER *ioc, |
9a28f49a CH |
2805 | EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *sas_event_data) |
2806 | { | |
2807 | struct mptsas_hotplug_event *ev; | |
2808 | u32 device_info = le32_to_cpu(sas_event_data->DeviceInfo); | |
2809 | __le64 sas_address; | |
2810 | ||
2811 | if ((device_info & | |
2812 | (MPI_SAS_DEVICE_INFO_SSP_TARGET | | |
2813 | MPI_SAS_DEVICE_INFO_STP_TARGET | | |
2814 | MPI_SAS_DEVICE_INFO_SATA_DEVICE )) == 0) | |
2815 | return; | |
2816 | ||
4b766471 | 2817 | switch (sas_event_data->ReasonCode) { |
4b766471 | 2818 | case MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING: |
df9e062a EM |
2819 | |
2820 | mptsas_target_reset_queue(ioc, sas_event_data); | |
2821 | break; | |
2822 | ||
2823 | case MPI_EVENT_SAS_DEV_STAT_RC_ADDED: | |
547f9a21 | 2824 | ev = kzalloc(sizeof(*ev), GFP_ATOMIC); |
4b766471 ME |
2825 | if (!ev) { |
2826 | printk(KERN_WARNING "mptsas: lost hotplug event\n"); | |
2827 | break; | |
2828 | } | |
9a28f49a | 2829 | |
c4028958 | 2830 | INIT_WORK(&ev->work, mptsas_hotplug_work); |
4b766471 ME |
2831 | ev->ioc = ioc; |
2832 | ev->handle = le16_to_cpu(sas_event_data->DevHandle); | |
2833 | ev->parent_handle = | |
2834 | le16_to_cpu(sas_event_data->ParentDevHandle); | |
2835 | ev->channel = sas_event_data->Bus; | |
2836 | ev->id = sas_event_data->TargetID; | |
2837 | ev->phy_id = sas_event_data->PhyNum; | |
2838 | memcpy(&sas_address, &sas_event_data->SASAddress, | |
2839 | sizeof(__le64)); | |
2840 | ev->sas_address = le64_to_cpu(sas_address); | |
2841 | ev->device_info = device_info; | |
2842 | ||
2843 | if (sas_event_data->ReasonCode & | |
2844 | MPI_EVENT_SAS_DEV_STAT_RC_ADDED) | |
2845 | ev->event_type = MPTSAS_ADD_DEVICE; | |
2846 | else | |
2847 | ev->event_type = MPTSAS_DEL_DEVICE; | |
2848 | schedule_work(&ev->work); | |
2849 | break; | |
2850 | case MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED: | |
2851 | /* | |
2852 | * Persistent table is full. | |
2853 | */ | |
547f9a21 | 2854 | INIT_WORK(&ioc->sas_persist_task, |
c4028958 | 2855 | mptsas_persist_clear_table); |
547f9a21 | 2856 | schedule_work(&ioc->sas_persist_task); |
4b766471 | 2857 | break; |
b506ade9 EM |
2858 | /* |
2859 | * TODO, handle other events | |
2860 | */ | |
4b766471 | 2861 | case MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA: |
b506ade9 | 2862 | case MPI_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED: |
4b766471 | 2863 | case MPI_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET: |
b506ade9 EM |
2864 | case MPI_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL: |
2865 | case MPI_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL: | |
2866 | case MPI_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL: | |
2867 | case MPI_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL: | |
4b766471 ME |
2868 | default: |
2869 | break; | |
9a28f49a | 2870 | } |
9a28f49a | 2871 | } |
c73787ee | 2872 | static void |
547f9a21 | 2873 | mptsas_send_raid_event(MPT_ADAPTER *ioc, |
c73787ee ME |
2874 | EVENT_DATA_RAID *raid_event_data) |
2875 | { | |
2876 | struct mptsas_hotplug_event *ev; | |
bd23e94c ME |
2877 | int status = le32_to_cpu(raid_event_data->SettingsStatus); |
2878 | int state = (status >> 8) & 0xff; | |
c73787ee ME |
2879 | |
2880 | if (ioc->bus_type != SAS) | |
2881 | return; | |
2882 | ||
547f9a21 | 2883 | ev = kzalloc(sizeof(*ev), GFP_ATOMIC); |
c73787ee ME |
2884 | if (!ev) { |
2885 | printk(KERN_WARNING "mptsas: lost hotplug event\n"); | |
2886 | return; | |
2887 | } | |
2888 | ||
c4028958 | 2889 | INIT_WORK(&ev->work, mptsas_hotplug_work); |
c73787ee ME |
2890 | ev->ioc = ioc; |
2891 | ev->id = raid_event_data->VolumeID; | |
b506ade9 | 2892 | ev->channel = raid_event_data->VolumeBus; |
bd23e94c | 2893 | ev->event_type = MPTSAS_IGNORE_EVENT; |
c73787ee ME |
2894 | |
2895 | switch (raid_event_data->ReasonCode) { | |
2896 | case MPI_EVENT_RAID_RC_PHYSDISK_DELETED: | |
b506ade9 EM |
2897 | ev->phys_disk_num_valid = 1; |
2898 | ev->phys_disk_num = raid_event_data->PhysDiskNum; | |
c73787ee ME |
2899 | ev->event_type = MPTSAS_ADD_DEVICE; |
2900 | break; | |
2901 | case MPI_EVENT_RAID_RC_PHYSDISK_CREATED: | |
f44e5461 ME |
2902 | ev->phys_disk_num_valid = 1; |
2903 | ev->phys_disk_num = raid_event_data->PhysDiskNum; | |
b506ade9 | 2904 | ev->hidden_raid_component = 1; |
c73787ee ME |
2905 | ev->event_type = MPTSAS_DEL_DEVICE; |
2906 | break; | |
bd23e94c ME |
2907 | case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED: |
2908 | switch (state) { | |
2909 | case MPI_PD_STATE_ONLINE: | |
b506ade9 | 2910 | case MPI_PD_STATE_NOT_COMPATIBLE: |
bd23e94c ME |
2911 | ev->phys_disk_num_valid = 1; |
2912 | ev->phys_disk_num = raid_event_data->PhysDiskNum; | |
b506ade9 | 2913 | ev->hidden_raid_component = 1; |
bd23e94c ME |
2914 | ev->event_type = MPTSAS_ADD_DEVICE; |
2915 | break; | |
2916 | case MPI_PD_STATE_MISSING: | |
bd23e94c ME |
2917 | case MPI_PD_STATE_OFFLINE_AT_HOST_REQUEST: |
2918 | case MPI_PD_STATE_FAILED_AT_HOST_REQUEST: | |
2919 | case MPI_PD_STATE_OFFLINE_FOR_ANOTHER_REASON: | |
b506ade9 EM |
2920 | ev->phys_disk_num_valid = 1; |
2921 | ev->phys_disk_num = raid_event_data->PhysDiskNum; | |
bd23e94c ME |
2922 | ev->event_type = MPTSAS_DEL_DEVICE; |
2923 | break; | |
2924 | default: | |
2925 | break; | |
2926 | } | |
2927 | break; | |
c73787ee ME |
2928 | case MPI_EVENT_RAID_RC_VOLUME_DELETED: |
2929 | ev->event_type = MPTSAS_DEL_RAID; | |
2930 | break; | |
2931 | case MPI_EVENT_RAID_RC_VOLUME_CREATED: | |
2932 | ev->event_type = MPTSAS_ADD_RAID; | |
2933 | break; | |
2934 | case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED: | |
bd23e94c ME |
2935 | switch (state) { |
2936 | case MPI_RAIDVOL0_STATUS_STATE_FAILED: | |
2937 | case MPI_RAIDVOL0_STATUS_STATE_MISSING: | |
2938 | ev->event_type = MPTSAS_DEL_RAID; | |
2939 | break; | |
2940 | case MPI_RAIDVOL0_STATUS_STATE_OPTIMAL: | |
2941 | case MPI_RAIDVOL0_STATUS_STATE_DEGRADED: | |
2942 | ev->event_type = MPTSAS_ADD_RAID; | |
2943 | break; | |
2944 | default: | |
2945 | break; | |
2946 | } | |
c73787ee ME |
2947 | break; |
2948 | default: | |
2949 | break; | |
2950 | } | |
2951 | schedule_work(&ev->work); | |
2952 | } | |
2953 | ||
e6b2d76a | 2954 | static void |
547f9a21 | 2955 | mptsas_send_discovery_event(MPT_ADAPTER *ioc, |
e6b2d76a ME |
2956 | EVENT_DATA_SAS_DISCOVERY *discovery_data) |
2957 | { | |
2958 | struct mptsas_discovery_event *ev; | |
2959 | ||
2960 | /* | |
2961 | * DiscoveryStatus | |
2962 | * | |
2963 | * This flag will be non-zero when firmware | |
2964 | * kicks off discovery, and return to zero | |
2965 | * once its completed. | |
2966 | */ | |
2967 | if (discovery_data->DiscoveryStatus) | |
2968 | return; | |
2969 | ||
547f9a21 | 2970 | ev = kzalloc(sizeof(*ev), GFP_ATOMIC); |
e6b2d76a ME |
2971 | if (!ev) |
2972 | return; | |
c4028958 | 2973 | INIT_WORK(&ev->work, mptsas_discovery_work); |
e6b2d76a ME |
2974 | ev->ioc = ioc; |
2975 | schedule_work(&ev->work); | |
2976 | }; | |
2977 | ||
b506ade9 EM |
2978 | /* |
2979 | * mptsas_send_ir2_event - handle exposing hidden disk when | |
2980 | * an inactive raid volume is added | |
2981 | * | |
2982 | * @ioc: Pointer to MPT_ADAPTER structure | |
2983 | * @ir2_data | |
2984 | * | |
2985 | */ | |
2986 | static void | |
2987 | mptsas_send_ir2_event(MPT_ADAPTER *ioc, PTR_MPI_EVENT_DATA_IR2 ir2_data) | |
2988 | { | |
2989 | struct mptsas_hotplug_event *ev; | |
2990 | ||
2991 | if (ir2_data->ReasonCode != | |
2992 | MPI_EVENT_IR2_RC_FOREIGN_CFG_DETECTED) | |
2993 | return; | |
2994 | ||
2995 | ev = kzalloc(sizeof(*ev), GFP_ATOMIC); | |
2996 | if (!ev) | |
2997 | return; | |
2998 | ||
2999 | INIT_WORK(&ev->work, mptsas_hotplug_work); | |
3000 | ev->ioc = ioc; | |
3001 | ev->id = ir2_data->TargetID; | |
3002 | ev->channel = ir2_data->Bus; | |
3003 | ev->event_type = MPTSAS_ADD_INACTIVE_VOLUME; | |
3004 | ||
3005 | schedule_work(&ev->work); | |
3006 | }; | |
e6b2d76a | 3007 | |
9a28f49a CH |
3008 | static int |
3009 | mptsas_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *reply) | |
3010 | { | |
c73787ee | 3011 | int rc=1; |
9a28f49a CH |
3012 | u8 event = le32_to_cpu(reply->Event) & 0xFF; |
3013 | ||
3014 | if (!ioc->sh) | |
c73787ee | 3015 | goto out; |
9a28f49a | 3016 | |
e6b2d76a ME |
3017 | /* |
3018 | * sas_discovery_ignore_events | |
3019 | * | |
3020 | * This flag is to prevent anymore processing of | |
3021 | * sas events once mptsas_remove function is called. | |
3022 | */ | |
3023 | if (ioc->sas_discovery_ignore_events) { | |
3024 | rc = mptscsih_event_process(ioc, reply); | |
3025 | goto out; | |
3026 | } | |
3027 | ||
9a28f49a CH |
3028 | switch (event) { |
3029 | case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE: | |
547f9a21 | 3030 | mptsas_send_sas_event(ioc, |
9a28f49a | 3031 | (EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *)reply->Data); |
c73787ee ME |
3032 | break; |
3033 | case MPI_EVENT_INTEGRATED_RAID: | |
547f9a21 | 3034 | mptsas_send_raid_event(ioc, |
c73787ee ME |
3035 | (EVENT_DATA_RAID *)reply->Data); |
3036 | break; | |
79de278e | 3037 | case MPI_EVENT_PERSISTENT_TABLE_FULL: |
547f9a21 | 3038 | INIT_WORK(&ioc->sas_persist_task, |
c4028958 | 3039 | mptsas_persist_clear_table); |
547f9a21 | 3040 | schedule_work(&ioc->sas_persist_task); |
79de278e | 3041 | break; |
4b766471 | 3042 | case MPI_EVENT_SAS_DISCOVERY: |
547f9a21 | 3043 | mptsas_send_discovery_event(ioc, |
e6b2d76a ME |
3044 | (EVENT_DATA_SAS_DISCOVERY *)reply->Data); |
3045 | break; | |
b506ade9 EM |
3046 | case MPI_EVENT_IR2: |
3047 | mptsas_send_ir2_event(ioc, | |
3048 | (PTR_MPI_EVENT_DATA_IR2)reply->Data); | |
3049 | break; | |
9a28f49a | 3050 | default: |
c73787ee ME |
3051 | rc = mptscsih_event_process(ioc, reply); |
3052 | break; | |
9a28f49a | 3053 | } |
c73787ee ME |
3054 | out: |
3055 | ||
3056 | return rc; | |
9a28f49a CH |
3057 | } |
3058 | ||
0c33b27d CH |
3059 | static int |
3060 | mptsas_probe(struct pci_dev *pdev, const struct pci_device_id *id) | |
3061 | { | |
3062 | struct Scsi_Host *sh; | |
3063 | MPT_SCSI_HOST *hd; | |
3064 | MPT_ADAPTER *ioc; | |
3065 | unsigned long flags; | |
1ca00bb7 | 3066 | int ii; |
0c33b27d CH |
3067 | int numSGE = 0; |
3068 | int scale; | |
3069 | int ioc_cap; | |
0c33b27d CH |
3070 | int error=0; |
3071 | int r; | |
3072 | ||
3073 | r = mpt_attach(pdev,id); | |
3074 | if (r) | |
3075 | return r; | |
3076 | ||
3077 | ioc = pci_get_drvdata(pdev); | |
3078 | ioc->DoneCtx = mptsasDoneCtx; | |
3079 | ioc->TaskCtx = mptsasTaskCtx; | |
3080 | ioc->InternalCtx = mptsasInternalCtx; | |
3081 | ||
3082 | /* Added sanity check on readiness of the MPT adapter. | |
3083 | */ | |
3084 | if (ioc->last_state != MPI_IOC_STATE_OPERATIONAL) { | |
3085 | printk(MYIOC_s_WARN_FMT | |
3086 | "Skipping because it's not operational!\n", | |
3087 | ioc->name); | |
7acec1e7 MED |
3088 | error = -ENODEV; |
3089 | goto out_mptsas_probe; | |
0c33b27d CH |
3090 | } |
3091 | ||
3092 | if (!ioc->active) { | |
3093 | printk(MYIOC_s_WARN_FMT "Skipping because it's disabled!\n", | |
3094 | ioc->name); | |
7acec1e7 MED |
3095 | error = -ENODEV; |
3096 | goto out_mptsas_probe; | |
0c33b27d CH |
3097 | } |
3098 | ||
3099 | /* Sanity check - ensure at least 1 port is INITIATOR capable | |
3100 | */ | |
3101 | ioc_cap = 0; | |
3102 | for (ii = 0; ii < ioc->facts.NumberOfPorts; ii++) { | |
3103 | if (ioc->pfacts[ii].ProtocolFlags & | |
3104 | MPI_PORTFACTS_PROTOCOL_INITIATOR) | |
3105 | ioc_cap++; | |
3106 | } | |
3107 | ||
3108 | if (!ioc_cap) { | |
3109 | printk(MYIOC_s_WARN_FMT | |
3110 | "Skipping ioc=%p because SCSI Initiator mode " | |
3111 | "is NOT enabled!\n", ioc->name, ioc); | |
466544d8 | 3112 | return 0; |
0c33b27d CH |
3113 | } |
3114 | ||
3115 | sh = scsi_host_alloc(&mptsas_driver_template, sizeof(MPT_SCSI_HOST)); | |
3116 | if (!sh) { | |
3117 | printk(MYIOC_s_WARN_FMT | |
3118 | "Unable to register controller with SCSI subsystem\n", | |
3119 | ioc->name); | |
7acec1e7 MED |
3120 | error = -1; |
3121 | goto out_mptsas_probe; | |
0c33b27d CH |
3122 | } |
3123 | ||
3124 | spin_lock_irqsave(&ioc->FreeQlock, flags); | |
3125 | ||
3126 | /* Attach the SCSI Host to the IOC structure | |
3127 | */ | |
3128 | ioc->sh = sh; | |
3129 | ||
3130 | sh->io_port = 0; | |
3131 | sh->n_io_port = 0; | |
3132 | sh->irq = 0; | |
3133 | ||
3134 | /* set 16 byte cdb's */ | |
3135 | sh->max_cmd_len = 16; | |
3136 | ||
793955f5 EM |
3137 | sh->max_id = ioc->pfacts[0].PortSCSIID; |
3138 | sh->max_lun = max_lun; | |
0c33b27d CH |
3139 | |
3140 | sh->transportt = mptsas_transport_template; | |
3141 | ||
0c33b27d CH |
3142 | sh->this_id = ioc->pfacts[0].PortSCSIID; |
3143 | ||
3144 | /* Required entry. | |
3145 | */ | |
3146 | sh->unique_id = ioc->id; | |
3147 | ||
3148 | INIT_LIST_HEAD(&ioc->sas_topology); | |
9a28f49a | 3149 | mutex_init(&ioc->sas_topology_mutex); |
e6b2d76a | 3150 | mutex_init(&ioc->sas_discovery_mutex); |
eeb846ce | 3151 | mutex_init(&ioc->sas_mgmt.mutex); |
da4fa655 | 3152 | init_completion(&ioc->sas_mgmt.done); |
0c33b27d CH |
3153 | |
3154 | /* Verify that we won't exceed the maximum | |
3155 | * number of chain buffers | |
3156 | * We can optimize: ZZ = req_sz/sizeof(SGE) | |
3157 | * For 32bit SGE's: | |
3158 | * numSGE = 1 + (ZZ-1)*(maxChain -1) + ZZ | |
3159 | * + (req_sz - 64)/sizeof(SGE) | |
3160 | * A slightly different algorithm is required for | |
3161 | * 64bit SGEs. | |
3162 | */ | |
3163 | scale = ioc->req_sz/(sizeof(dma_addr_t) + sizeof(u32)); | |
3164 | if (sizeof(dma_addr_t) == sizeof(u64)) { | |
3165 | numSGE = (scale - 1) * | |
3166 | (ioc->facts.MaxChainDepth-1) + scale + | |
3167 | (ioc->req_sz - 60) / (sizeof(dma_addr_t) + | |
3168 | sizeof(u32)); | |
3169 | } else { | |
3170 | numSGE = 1 + (scale - 1) * | |
3171 | (ioc->facts.MaxChainDepth-1) + scale + | |
3172 | (ioc->req_sz - 64) / (sizeof(dma_addr_t) + | |
3173 | sizeof(u32)); | |
3174 | } | |
3175 | ||
3176 | if (numSGE < sh->sg_tablesize) { | |
3177 | /* Reset this value */ | |
3178 | dprintk((MYIOC_s_INFO_FMT | |
3179 | "Resetting sg_tablesize to %d from %d\n", | |
3180 | ioc->name, numSGE, sh->sg_tablesize)); | |
3181 | sh->sg_tablesize = numSGE; | |
3182 | } | |
3183 | ||
0c33b27d CH |
3184 | hd = (MPT_SCSI_HOST *) sh->hostdata; |
3185 | hd->ioc = ioc; | |
3186 | ||
3187 | /* SCSI needs scsi_cmnd lookup table! | |
3188 | * (with size equal to req_depth*PtrSz!) | |
3189 | */ | |
1ca00bb7 CH |
3190 | hd->ScsiLookup = kcalloc(ioc->req_depth, sizeof(void *), GFP_ATOMIC); |
3191 | if (!hd->ScsiLookup) { | |
0c33b27d | 3192 | error = -ENOMEM; |
7acec1e7 | 3193 | goto out_mptsas_probe; |
0c33b27d CH |
3194 | } |
3195 | ||
1ca00bb7 CH |
3196 | dprintk((MYIOC_s_INFO_FMT "ScsiLookup @ %p\n", |
3197 | ioc->name, hd->ScsiLookup)); | |
0c33b27d | 3198 | |
0c33b27d CH |
3199 | /* Clear the TM flags |
3200 | */ | |
3201 | hd->tmPending = 0; | |
3202 | hd->tmState = TM_STATE_NONE; | |
3203 | hd->resetPending = 0; | |
3204 | hd->abortSCpnt = NULL; | |
3205 | ||
3206 | /* Clear the pointer used to store | |
3207 | * single-threaded commands, i.e., those | |
3208 | * issued during a bus scan, dv and | |
3209 | * configuration pages. | |
3210 | */ | |
3211 | hd->cmdPtr = NULL; | |
3212 | ||
3213 | /* Initialize this SCSI Hosts' timers | |
3214 | * To use, set the timer expires field | |
3215 | * and add_timer | |
3216 | */ | |
3217 | init_timer(&hd->timer); | |
3218 | hd->timer.data = (unsigned long) hd; | |
3219 | hd->timer.function = mptscsih_timer_expired; | |
3220 | ||
0c33b27d CH |
3221 | ioc->sas_data.ptClear = mpt_pt_clear; |
3222 | ||
df9e062a EM |
3223 | init_waitqueue_head(&hd->scandv_waitq); |
3224 | hd->scandv_wait_done = 0; | |
3225 | hd->last_queue_full = 0; | |
3226 | INIT_LIST_HEAD(&hd->target_reset_list); | |
3227 | spin_unlock_irqrestore(&ioc->FreeQlock, flags); | |
3228 | ||
0c33b27d CH |
3229 | if (ioc->sas_data.ptClear==1) { |
3230 | mptbase_sas_persist_operation( | |
3231 | ioc, MPI_SAS_OP_CLEAR_ALL_PERSISTENT); | |
3232 | } | |
3233 | ||
0c33b27d CH |
3234 | error = scsi_add_host(sh, &ioc->pcidev->dev); |
3235 | if (error) { | |
3236 | dprintk((KERN_ERR MYNAM | |
3237 | "scsi_add_host failed\n")); | |
7acec1e7 | 3238 | goto out_mptsas_probe; |
0c33b27d CH |
3239 | } |
3240 | ||
3241 | mptsas_scan_sas_topology(ioc); | |
3242 | ||
3243 | return 0; | |
3244 | ||
547f9a21 | 3245 | out_mptsas_probe: |
0c33b27d CH |
3246 | |
3247 | mptscsih_remove(pdev); | |
3248 | return error; | |
3249 | } | |
3250 | ||
3251 | static void __devexit mptsas_remove(struct pci_dev *pdev) | |
3252 | { | |
3253 | MPT_ADAPTER *ioc = pci_get_drvdata(pdev); | |
3254 | struct mptsas_portinfo *p, *n; | |
547f9a21 | 3255 | int i; |
0c33b27d | 3256 | |
b506ade9 | 3257 | ioc->sas_discovery_ignore_events = 1; |
0c33b27d CH |
3258 | sas_remove_host(ioc->sh); |
3259 | ||
9a28f49a | 3260 | mutex_lock(&ioc->sas_topology_mutex); |
0c33b27d CH |
3261 | list_for_each_entry_safe(p, n, &ioc->sas_topology, list) { |
3262 | list_del(&p->list); | |
547f9a21 EM |
3263 | for (i = 0 ; i < p->num_phys ; i++) |
3264 | mptsas_port_delete(p->phy_info[i].port_details); | |
3265 | kfree(p->phy_info); | |
0c33b27d CH |
3266 | kfree(p); |
3267 | } | |
9a28f49a | 3268 | mutex_unlock(&ioc->sas_topology_mutex); |
0c33b27d CH |
3269 | |
3270 | mptscsih_remove(pdev); | |
3271 | } | |
3272 | ||
3273 | static struct pci_device_id mptsas_pci_table[] = { | |
87cf8986 | 3274 | { PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVID_SAS1064, |
0c33b27d | 3275 | PCI_ANY_ID, PCI_ANY_ID }, |
87cf8986 | 3276 | { PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVID_SAS1068, |
0c33b27d | 3277 | PCI_ANY_ID, PCI_ANY_ID }, |
87cf8986 | 3278 | { PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVID_SAS1064E, |
0c33b27d | 3279 | PCI_ANY_ID, PCI_ANY_ID }, |
87cf8986 | 3280 | { PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVID_SAS1068E, |
0c33b27d | 3281 | PCI_ANY_ID, PCI_ANY_ID }, |
87cf8986 | 3282 | { PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVID_SAS1078, |
0c33b27d CH |
3283 | PCI_ANY_ID, PCI_ANY_ID }, |
3284 | {0} /* Terminating entry */ | |
3285 | }; | |
3286 | MODULE_DEVICE_TABLE(pci, mptsas_pci_table); | |
3287 | ||
3288 | ||
3289 | static struct pci_driver mptsas_driver = { | |
3290 | .name = "mptsas", | |
3291 | .id_table = mptsas_pci_table, | |
3292 | .probe = mptsas_probe, | |
3293 | .remove = __devexit_p(mptsas_remove), | |
3294 | .shutdown = mptscsih_shutdown, | |
3295 | #ifdef CONFIG_PM | |
3296 | .suspend = mptscsih_suspend, | |
3297 | .resume = mptscsih_resume, | |
3298 | #endif | |
3299 | }; | |
3300 | ||
3301 | static int __init | |
3302 | mptsas_init(void) | |
3303 | { | |
3304 | show_mptmod_ver(my_NAME, my_VERSION); | |
3305 | ||
3306 | mptsas_transport_template = | |
3307 | sas_attach_transport(&mptsas_transport_functions); | |
3308 | if (!mptsas_transport_template) | |
3309 | return -ENODEV; | |
3310 | ||
3311 | mptsasDoneCtx = mpt_register(mptscsih_io_done, MPTSAS_DRIVER); | |
df9e062a | 3312 | mptsasTaskCtx = mpt_register(mptsas_taskmgmt_complete, MPTSAS_DRIVER); |
0c33b27d CH |
3313 | mptsasInternalCtx = |
3314 | mpt_register(mptscsih_scandv_complete, MPTSAS_DRIVER); | |
da4fa655 | 3315 | mptsasMgmtCtx = mpt_register(mptsas_mgmt_done, MPTSAS_DRIVER); |
0c33b27d | 3316 | |
9a28f49a | 3317 | if (mpt_event_register(mptsasDoneCtx, mptsas_event_process) == 0) { |
3a892bef | 3318 | devtverboseprintk((KERN_INFO MYNAM |
0c33b27d CH |
3319 | ": Registered for IOC event notifications\n")); |
3320 | } | |
3321 | ||
df9e062a | 3322 | if (mpt_reset_register(mptsasDoneCtx, mptsas_ioc_reset) == 0) { |
0c33b27d CH |
3323 | dprintk((KERN_INFO MYNAM |
3324 | ": Registered for IOC reset notifications\n")); | |
3325 | } | |
3326 | ||
3327 | return pci_register_driver(&mptsas_driver); | |
3328 | } | |
3329 | ||
3330 | static void __exit | |
3331 | mptsas_exit(void) | |
3332 | { | |
3333 | pci_unregister_driver(&mptsas_driver); | |
3334 | sas_release_transport(mptsas_transport_template); | |
3335 | ||
3336 | mpt_reset_deregister(mptsasDoneCtx); | |
3337 | mpt_event_deregister(mptsasDoneCtx); | |
3338 | ||
da4fa655 | 3339 | mpt_deregister(mptsasMgmtCtx); |
0c33b27d CH |
3340 | mpt_deregister(mptsasInternalCtx); |
3341 | mpt_deregister(mptsasTaskCtx); | |
3342 | mpt_deregister(mptsasDoneCtx); | |
3343 | } | |
3344 | ||
3345 | module_init(mptsas_init); | |
3346 | module_exit(mptsas_exit); |