[GitHub/mt8127/android_kernel_alcatel_ttab.git] / drivers / media / tuners / tuner-xc2028-types.h

/* tuner-xc2028_types
 *
 * This file includes internal tipes to be used inside tuner-xc2028.
 * Shouldn't be included outside tuner-xc2028
 *
 * Copyright (c) 2007-2008 Mauro Carvalho Chehab (mchehab@infradead.org)
 * This code is placed under the terms of the GNU General Public License v2
 */

/* xc3028 firmware types */

/* BASE firmware should be loaded before any other firmware */
#define BASE		(1<<0)
#define BASE_TYPES	(BASE|F8MHZ|MTS|FM|INPUT1|INPUT2|INIT1)

/* F8MHZ marks BASE firmwares for 8 MHz Bandwidth */
#define F8MHZ		(1<<1)

/* Multichannel Television Sound (MTS)
   Those firmwares are capable of using xc2038 DSP to decode audio and
   produce a baseband audio output on some pins of the chip.
   There are MTS firmwares for the most used video standards. It should be
   required to use MTS firmwares, depending on the way audio is routed into
   the bridge chip
 */
#define MTS		(1<<2)

/* FIXME: I have no idea what's the difference between
   D2620 and D2633 firmwares
 */
#define D2620		(1<<3)
#define D2633		(1<<4)

/* DTV firmwares for 6, 7 and 8 MHz
   DTV6 - 6MHz - ATSC/DVB-C/DVB-T/ISDB-T/DOCSIS
   DTV8 - 8MHz - DVB-C/DVB-T
 */
#define DTV6           (1 << 5)
#define QAM            (1 << 6)
#define DTV7		(1<<7)
#define DTV78		(1<<8)
#define DTV8		(1<<9)

#define DTV_TYPES	(D2620|D2633|DTV6|QAM|DTV7|DTV78|DTV8|ATSC)

/* There's a FM | BASE firmware + FM specific firmware (std=0) */
#define	FM		(1<<10)

#define STD_SPECIFIC_TYPES (MTS|FM|LCD|NOGD)

/* Applies only for FM firmware
   Makes it use RF input 1 (pin #2) instead of input 2 (pin #4)
 */
#define INPUT1		(1<<11)


/* LCD firmwares exist only for MTS STD/MN (PAL or NTSC/M)
	and for non-MTS STD/MN (PAL, NTSC/M or NTSC/Kr)
	There are variants both with and without NOGD
	Those firmwares produce better result with LCD displays
 */
#define LCD		(1<<12)

/* NOGD firmwares exist only for MTS STD/MN (PAL or NTSC/M)
	and for non-MTS STD/MN (PAL, NTSC/M or NTSC/Kr)
	The NOGD firmwares don't have group delay compensation filter
 */
#define NOGD		(1<<13)

/* Old firmwares were broken into init0 and init1 */
#define INIT1		(1<<14)

/* SCODE firmware selects particular behaviours */
#define MONO           (1 << 15)
#define ATSC           (1 << 16)
#define IF             (1 << 17)
#define LG60           (1 << 18)
#define ATI638         (1 << 19)
#define OREN538        (1 << 20)
#define OREN36         (1 << 21)
#define TOYOTA388      (1 << 22)
#define TOYOTA794      (1 << 23)
#define DIBCOM52       (1 << 24)
#define ZARLINK456     (1 << 25)
#define CHINA          (1 << 26)
#define F6MHZ          (1 << 27)
#define INPUT2         (1 << 28)
#define SCODE          (1 << 29)

/* This flag identifies that the scode table has a new format */
#define HAS_IF         (1 << 30)

/* There are different scode tables for MTS and non-MTS.
   The MTS firmwares support mono only
  */
#define SCODE_TYPES (SCODE | MTS)


/* Newer types not defined on videodev2.h.
   The original idea were to move all those types to videodev2.h, but
   it seemed overkill, since, with the exception of SECAM/K3, the other
   types seem to be autodetected.
   It is not clear where secam/k3 is used, nor we have a feedback of this
   working or being autodetected by the standard secam firmware.
 */

#define V4L2_STD_SECAM_K3	(0x04000000)

/* Audio types */

#define V4L2_STD_A2_A		(1LL<<32)
#define V4L2_STD_A2_B		(1LL<<33)
#define V4L2_STD_NICAM_A	(1LL<<34)
#define V4L2_STD_NICAM_B	(1LL<<35)
#define V4L2_STD_AM		(1LL<<36)
#define V4L2_STD_BTSC		(1LL<<37)
#define V4L2_STD_EIAJ		(1LL<<38)

#define V4L2_STD_A2		(V4L2_STD_A2_A    | V4L2_STD_A2_B)
#define V4L2_STD_NICAM		(V4L2_STD_NICAM_A | V4L2_STD_NICAM_B)

/* To preserve backward compatibilty,
   (std & V4L2_STD_AUDIO) = 0 means that ALL audio stds are supported
 */

#define V4L2_STD_AUDIO		(V4L2_STD_A2    | \
				 V4L2_STD_NICAM | \
				 V4L2_STD_AM    | \
				 V4L2_STD_BTSC  | \
				 V4L2_STD_EIAJ)

/* Used standards with audio restrictions */

#define V4L2_STD_PAL_BG_A2_A	(V4L2_STD_PAL_BG | V4L2_STD_A2_A)
#define V4L2_STD_PAL_BG_A2_B	(V4L2_STD_PAL_BG | V4L2_STD_A2_B)
#define V4L2_STD_PAL_BG_NICAM_A	(V4L2_STD_PAL_BG | V4L2_STD_NICAM_A)
#define V4L2_STD_PAL_BG_NICAM_B	(V4L2_STD_PAL_BG | V4L2_STD_NICAM_B)
#define V4L2_STD_PAL_DK_A2	(V4L2_STD_PAL_DK | V4L2_STD_A2)
#define V4L2_STD_PAL_DK_NICAM	(V4L2_STD_PAL_DK | V4L2_STD_NICAM)
#define V4L2_STD_SECAM_L_NICAM	(V4L2_STD_SECAM_L | V4L2_STD_NICAM)
#define V4L2_STD_SECAM_L_AM	(V4L2_STD_SECAM_L | V4L2_STD_AM)
Commit	Line	Data
de3fe21b MCC	1	/* tuner-xc2028_types
de3fe21b MCC	2	*
33e53161 MCC	3	* This file includes internal tipes to be used inside tuner-xc2028.
	4	* Shouldn't be included outside tuner-xc2028
	5	*
	6	* Copyright (c) 2007-2008 Mauro Carvalho Chehab (mchehab@infradead.org)
de3fe21b MCC	7	* This code is placed under the terms of the GNU General Public License v2
	8	*/
	9
	10	/* xc3028 firmware types */
	11
	12	/* BASE firmware should be loaded before any other firmware */
	13	#define BASE (1<<0)
e0f0b37a	14	#define BASE_TYPES (BASE\|F8MHZ\|MTS\|FM\|INPUT1\|INPUT2\|INIT1)
de3fe21b MCC	15
	16	/* F8MHZ marks BASE firmwares for 8 MHz Bandwidth */
	17	#define F8MHZ (1<<1)
	18
	19	/* Multichannel Television Sound (MTS)
	20	Those firmwares are capable of using xc2038 DSP to decode audio and
	21	produce a baseband audio output on some pins of the chip.
	22	There are MTS firmwares for the most used video standards. It should be
	23	required to use MTS firmwares, depending on the way audio is routed into
	24	the bridge chip
	25	*/
	26	#define MTS (1<<2)
	27
	28	/* FIXME: I have no idea what's the difference between
	29	D2620 and D2633 firmwares
	30	*/
	31	#define D2620 (1<<3)
	32	#define D2633 (1<<4)
	33
	34	/* DTV firmwares for 6, 7 and 8 MHz
	35	DTV6 - 6MHz - ATSC/DVB-C/DVB-T/ISDB-T/DOCSIS
	36	DTV8 - 8MHz - DVB-C/DVB-T
	37	*/
43efe702 MCC	38	#define DTV6 (1 << 5)
43efe702 MCC	39	#define QAM (1 << 6)
de3fe21b MCC	40	#define DTV7 (1<<7)
	41	#define DTV78 (1<<8)
	42	#define DTV8 (1<<9)
	43
e0f0b37a CP	44	#define DTV_TYPES (D2620\|D2633\|DTV6\|QAM\|DTV7\|DTV78\|DTV8\|ATSC)
e0f0b37a CP	45
de3fe21b MCC	46	/* There's a FM \| BASE firmware + FM specific firmware (std=0) */
	47	#define FM (1<<10)
	48
11a9eff9 CP	49	#define STD_SPECIFIC_TYPES (MTS\|FM\|LCD\|NOGD)
11a9eff9 CP	50
de3fe21b MCC	51	/* Applies only for FM firmware
	52	Makes it use RF input 1 (pin #2) instead of input 2 (pin #4)
	53	*/
	54	#define INPUT1 (1<<11)
	55
	56
	57	/* LCD firmwares exist only for MTS STD/MN (PAL or NTSC/M)
	58	and for non-MTS STD/MN (PAL, NTSC/M or NTSC/Kr)
	59	There are variants both with and without NOGD
c21f1e2e	60	Those firmwares produce better result with LCD displays
de3fe21b MCC	61	*/
	62	#define LCD (1<<12)
	63
	64	/* NOGD firmwares exist only for MTS STD/MN (PAL or NTSC/M)
	65	and for non-MTS STD/MN (PAL, NTSC/M or NTSC/Kr)
c21f1e2e	66	The NOGD firmwares don't have group delay compensation filter
de3fe21b MCC	67	*/
	68	#define NOGD (1<<13)
	69
	70	/* Old firmwares were broken into init0 and init1 */
	71	#define INIT1 (1<<14)
	72
e0f0b37a	73	/* SCODE firmware selects particular behaviours */
43efe702 MCC	74	#define MONO (1 << 15)
	75	#define ATSC (1 << 16)
	76	#define IF (1 << 17)
	77	#define LG60 (1 << 18)
	78	#define ATI638 (1 << 19)
	79	#define OREN538 (1 << 20)
	80	#define OREN36 (1 << 21)
	81	#define TOYOTA388 (1 << 22)
	82	#define TOYOTA794 (1 << 23)
	83	#define DIBCOM52 (1 << 24)
	84	#define ZARLINK456 (1 << 25)
	85	#define CHINA (1 << 26)
	86	#define F6MHZ (1 << 27)
	87	#define INPUT2 (1 << 28)
	88	#define SCODE (1 << 29)
	89
66c2d53d MCC	90	/* This flag identifies that the scode table has a new format */
	91	#define HAS_IF (1 << 30)
	92
c21f1e2e MCC	93	/* There are different scode tables for MTS and non-MTS.
	94	The MTS firmwares support mono only
	95	*/
	96	#define SCODE_TYPES (SCODE \| MTS)
33e53161	97
e0f0b37a	98
33e53161 MCC	99	/* Newer types not defined on videodev2.h.
	100	The original idea were to move all those types to videodev2.h, but
	101	it seemed overkill, since, with the exception of SECAM/K3, the other
	102	types seem to be autodetected.
	103	It is not clear where secam/k3 is used, nor we have a feedback of this
	104	working or being autodetected by the standard secam firmware.
	105	*/
de3fe21b	106
43efe702	107	#define V4L2_STD_SECAM_K3 (0x04000000)
de3fe21b MCC	108
	109	/* Audio types */
	110
ef8c1888 MCC	111	#define V4L2_STD_A2_A (1LL<<32)
	112	#define V4L2_STD_A2_B (1LL<<33)
	113	#define V4L2_STD_NICAM_A (1LL<<34)
	114	#define V4L2_STD_NICAM_B (1LL<<35)
	115	#define V4L2_STD_AM (1LL<<36)
	116	#define V4L2_STD_BTSC (1LL<<37)
	117	#define V4L2_STD_EIAJ (1LL<<38)
de3fe21b MCC	118
	119	#define V4L2_STD_A2 (V4L2_STD_A2_A \| V4L2_STD_A2_B)
	120	#define V4L2_STD_NICAM (V4L2_STD_NICAM_A \| V4L2_STD_NICAM_B)
	121
	122	/* To preserve backward compatibilty,
	123	(std & V4L2_STD_AUDIO) = 0 means that ALL audio stds are supported
	124	*/
	125
	126	#define V4L2_STD_AUDIO (V4L2_STD_A2 \| \
	127	V4L2_STD_NICAM \| \
	128	V4L2_STD_AM \| \
	129	V4L2_STD_BTSC \| \
	130	V4L2_STD_EIAJ)
	131
	132	/* Used standards with audio restrictions */
	133
	134	#define V4L2_STD_PAL_BG_A2_A (V4L2_STD_PAL_BG \| V4L2_STD_A2_A)
	135	#define V4L2_STD_PAL_BG_A2_B (V4L2_STD_PAL_BG \| V4L2_STD_A2_B)
	136	#define V4L2_STD_PAL_BG_NICAM_A (V4L2_STD_PAL_BG \| V4L2_STD_NICAM_A)
	137	#define V4L2_STD_PAL_BG_NICAM_B (V4L2_STD_PAL_BG \| V4L2_STD_NICAM_B)
	138	#define V4L2_STD_PAL_DK_A2 (V4L2_STD_PAL_DK \| V4L2_STD_A2)
	139	#define V4L2_STD_PAL_DK_NICAM (V4L2_STD_PAL_DK \| V4L2_STD_NICAM)
	140	#define V4L2_STD_SECAM_L_NICAM (V4L2_STD_SECAM_L \| V4L2_STD_NICAM)
	141	#define V4L2_STD_SECAM_L_AM (V4L2_STD_SECAM_L \| V4L2_STD_AM)