[GitHub/mt8127/android_kernel_alcatel_ttab.git] / drivers / media / radio / Kconfig

#
# Multimedia Video device configuration
#

menuconfig RADIO_ADAPTERS
	bool "Radio Adapters"
	depends on VIDEO_V4L2
	depends on MEDIA_RADIO_SUPPORT
	default y
	---help---
	  Say Y here to enable selecting AM/FM radio adapters.

if RADIO_ADAPTERS && VIDEO_V4L2

config RADIO_SI470X
	bool "Silicon Labs Si470x FM Radio Receiver support"
	depends on VIDEO_V4L2

source "drivers/media/radio/si470x/Kconfig"

config RADIO_SI476X
	tristate "Silicon Laboratories Si476x I2C FM Radio"
	depends on I2C && VIDEO_V4L2
	depends on MFD_SI476X_CORE
	depends on SND_SOC
	select SND_SOC_SI476X
	---help---
	  Choose Y here if you have this FM radio chip.

	  In order to control your radio card, you will need to use programs
	  that are compatible with the Video For Linux 2 API.  Information on
	  this API and pointers to "v4l2" programs may be found at
	  <file:Documentation/video4linux/API.html>.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-si476x.

config USB_MR800
	tristate "AverMedia MR 800 USB FM radio support"
	depends on USB && VIDEO_V4L2
	---help---
	  Say Y here if you want to connect this type of radio to your
	  computer's USB port. Note that the audio is not digital, and
	  you must connect the line out connector to a sound card or a
	  set of speakers.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-mr800.

config USB_DSBR
	tristate "D-Link/GemTek USB FM radio support"
	depends on USB && VIDEO_V4L2
	---help---
	  Say Y here if you want to connect this type of radio to your
	  computer's USB port. Note that the audio is not digital, and
	  you must connect the line out connector to a sound card or a
	  set of speakers.

	  To compile this driver as a module, choose M here: the
	  module will be called dsbr100.

config RADIO_MAXIRADIO
	tristate "Guillemot MAXI Radio FM 2000 radio"
	depends on VIDEO_V4L2 && PCI && SND
	---help---
	  Choose Y here if you have this radio card.  This card may also be
	  found as Gemtek PCI FM.

	  In order to control your radio card, you will need to use programs
	  that are compatible with the Video For Linux API.  Information on
	  this API and pointers to "v4l" programs may be found at
	  <file:Documentation/video4linux/API.html>.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-maxiradio.

config RADIO_SHARK
	tristate "Griffin radioSHARK USB radio receiver"
	depends on USB && SND
	---help---
	  Choose Y here if you have this radio receiver.

	  There are 2 versions of this device, this driver is for version 1,
	  which is white.

	  In order to control your radio card, you will need to use programs
	  that are compatible with the Video For Linux API.  Information on
	  this API and pointers to "v4l" programs may be found at
	  <file:Documentation/video4linux/API.html>.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-shark.

config RADIO_SHARK2
	tristate "Griffin radioSHARK2 USB radio receiver"
	depends on USB
	---help---
	  Choose Y here if you have this radio receiver.

	  There are 2 versions of this device, this driver is for version 2,
	  which is black.

	  In order to control your radio card, you will need to use programs
	  that are compatible with the Video For Linux API.  Information on
	  this API and pointers to "v4l" programs may be found at
	  <file:Documentation/video4linux/API.html>.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-shark2.

config I2C_SI4713
	tristate "I2C driver for Silicon Labs Si4713 device"
	depends on I2C && VIDEO_V4L2
	---help---
	  Say Y here if you want support to Si4713 I2C device.
	  This device driver supports only i2c bus.

	  To compile this driver as a module, choose M here: the
	  module will be called si4713.

config RADIO_SI4713
	tristate "Silicon Labs Si4713 FM Radio Transmitter support"
	depends on I2C && VIDEO_V4L2
	select I2C_SI4713
	---help---
	  Say Y here if you want support to Si4713 FM Radio Transmitter.
	  This device can transmit audio through FM. It can transmit
	  RDS and RBDS signals as well. This module is the v4l2 radio
	  interface for the i2c driver of this device.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-si4713.

config USB_KEENE
	tristate "Keene FM Transmitter USB support"
	depends on USB && VIDEO_V4L2
	---help---
	  Say Y here if you want to connect this type of FM transmitter
	  to your computer's USB port.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-keene.

config USB_MA901
	tristate "Masterkit MA901 USB FM radio support"
	depends on USB && VIDEO_V4L2
	---help---
	  Say Y here if you want to connect this type of radio to your
	  computer's USB port. Note that the audio is not digital, and
	  you must connect the line out connector to a sound card or a
	  set of speakers or headphones.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-ma901.

config RADIO_TEA5764
	tristate "TEA5764 I2C FM radio support"
	depends on I2C && VIDEO_V4L2
	---help---
	  Say Y here if you want to use the TEA5764 FM chip found in
	  EZX phones. This FM chip is present in EZX phones from Motorola,
	  connected to internal pxa I2C bus.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-tea5764.

config RADIO_TEA5764_XTAL
	bool "TEA5764 crystal reference"
	depends on RADIO_TEA5764=y
	default y
	help
	  Say Y here if TEA5764 have a 32768 Hz crystal in circuit, say N
	  here if TEA5764 reference frequency is connected in FREQIN.

config RADIO_SAA7706H
	tristate "SAA7706H Car Radio DSP"
	depends on I2C && VIDEO_V4L2
	---help---
	  Say Y here if you want to use the SAA7706H Car radio Digital
	  Signal Processor, found for instance on the Russellville development
	  board. On the russellville the device is connected to internal
	  timberdale I2C bus.

	  To compile this driver as a module, choose M here: the
	  module will be called SAA7706H.

config RADIO_TEF6862
	tristate "TEF6862 Car Radio Enhanced Selectivity Tuner"
	depends on I2C && VIDEO_V4L2
	---help---
	  Say Y here if you want to use the TEF6862 Car Radio Enhanced
	  Selectivity Tuner, found for instance on the Russellville development
	  board. On the russellville the device is connected to internal
	  timberdale I2C bus.

	  To compile this driver as a module, choose M here: the
	  module will be called TEF6862.

config RADIO_TIMBERDALE
	tristate "Enable the Timberdale radio driver"
	depends on MFD_TIMBERDALE && VIDEO_V4L2
	depends on I2C	# for RADIO_SAA7706H
	select RADIO_TEF6862
	select RADIO_SAA7706H
	---help---
	  This is a kind of umbrella driver for the Radio Tuner and DSP
	  found behind the Timberdale FPGA on the Russellville board.
	  Enabling this driver will automatically select the DSP and tuner.

config RADIO_WL1273
	tristate "Texas Instruments WL1273 I2C FM Radio"
	depends on I2C && VIDEO_V4L2 && GENERIC_HARDIRQS
	select MFD_CORE
	select MFD_WL1273_CORE
	select FW_LOADER
	---help---
	  Choose Y here if you have this FM radio chip.

	  In order to control your radio card, you will need to use programs
	  that are compatible with the Video For Linux 2 API.  Information on
	  this API and pointers to "v4l2" programs may be found at
	  <file:Documentation/video4linux/API.html>.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-wl1273.

# TI's ST based wl128x FM radio
source "drivers/media/radio/wl128x/Kconfig"

#
# ISA drivers configuration
#

menuconfig V4L_RADIO_ISA_DRIVERS
	bool "ISA radio devices"
	depends on ISA
	default n
	---help---
	  Say Y here to enable support for these ISA drivers.

if V4L_RADIO_ISA_DRIVERS

config RADIO_ISA
	depends on ISA
	tristate

config RADIO_CADET
	tristate "ADS Cadet AM/FM Tuner"
	depends on ISA && VIDEO_V4L2
	---help---
	  Choose Y here if you have one of these AM/FM radio cards, and then
	  fill in the port address below.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-cadet.

config RADIO_RTRACK
	tristate "AIMSlab RadioTrack (aka RadioReveal) support"
	depends on ISA && VIDEO_V4L2
	select RADIO_ISA
	---help---
	  Choose Y here if you have one of these FM radio cards, and then fill
	  in the port address below.

	  Note that newer AIMSlab RadioTrack cards have a different chipset
	  and are not supported by this driver.  For these cards, use the
	  RadioTrack II driver below.

	  If you have a GemTeks combined (PnP) sound- and radio card you must
	  use this driver as a module and setup the card with isapnptools.
	  You must also pass the module a suitable io parameter, 0x248 has
	  been reported to be used by these cards.

	  More information is contained in the file
	  <file:Documentation/video4linux/radiotrack.txt>.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-aimslab.

config RADIO_RTRACK_PORT
	hex "RadioTrack i/o port (0x20f or 0x30f)"
	depends on RADIO_RTRACK=y
	default "30f"
	help
	  Enter either 0x30f or 0x20f here.  The card default is 0x30f, if you
	  haven't changed the jumper setting on the card.

config RADIO_RTRACK2
	tristate "AIMSlab RadioTrack II support"
	depends on ISA && VIDEO_V4L2
	select RADIO_ISA
	---help---
	  Choose Y here if you have this FM radio card, and then fill in the
	  port address below.

	  Note: this driver hasn't been tested since a long time due to lack
	  of hardware. If you have this hardware, then please contact the
	  linux-media mailinglist.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-rtrack2.

config RADIO_RTRACK2_PORT
	hex "RadioTrack II i/o port (0x20c or 0x30c)"
	depends on RADIO_RTRACK2=y
	default "30c"
	help
	  Enter either 0x30c or 0x20c here.  The card default is 0x30c, if you
	  haven't changed the jumper setting on the card.

config RADIO_AZTECH
	tristate "Aztech/Packard Bell Radio"
	depends on ISA && VIDEO_V4L2
	select RADIO_ISA
	---help---
	  Choose Y here if you have one of these FM radio cards, and then fill
	  in the port address below.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-aztech.

config RADIO_AZTECH_PORT
	hex "Aztech/Packard Bell I/O port (0x350 or 0x358)"
	depends on RADIO_AZTECH=y
	default "350"
	help
	  Enter either 0x350 or 0x358 here.  The card default is 0x350, if you
	  haven't changed the setting of jumper JP3 on the card.  Removing the
	  jumper sets the card to 0x358.

config RADIO_GEMTEK
	tristate "GemTek Radio card (or compatible) support"
	depends on ISA && VIDEO_V4L2
	select RADIO_ISA
	---help---
	  Choose Y here if you have this FM radio card, and then fill in the
	  I/O port address and settings below. The following cards either have
	  GemTek Radio tuner or are rebranded GemTek Radio cards:

	  - Sound Vision 16 Gold with FM Radio
	  - Typhoon Radio card (some models)
	  - Hama Radio card

	  To compile this driver as a module, choose M here: the
	  module will be called radio-gemtek.

config RADIO_GEMTEK_PORT
	hex "Fixed I/O port (0x20c, 0x30c, 0x24c, 0x34c, 0x248 or 0x28c)"
	depends on RADIO_GEMTEK=y
	default "34c"
	help
	  Enter either 0x20c, 0x30c, 0x24c, 0x34c, 0x248 or 0x28c here. The
	  card default is 0x34c, if you haven't changed the jumper setting
	  on the card.

	  On Sound Vision 16 Gold PnP with FM Radio (ESS1869+FM Gemtek), the I/O
	  port is 0x20c, 0x248 or 0x28c.

	  If automatic I/O port probing is enabled this port will be used only
	  in case of automatic probing failure, ie. as a fallback.

config RADIO_GEMTEK_PROBE
	bool "Automatic I/O port probing"
	depends on RADIO_GEMTEK=y
	default y
	help
	  Say Y here to enable automatic probing for GemTek Radio card. The
	  following ports will be probed: 0x20c, 0x30c, 0x24c, 0x34c, 0x248 and
	  0x28c.

config RADIO_MIROPCM20
	tristate "miroSOUND PCM20 radio"
	depends on ISA && ISA_DMA_API && VIDEO_V4L2 && SND
	select SND_ISA
	select SND_MIRO
	---help---
	  Choose Y here if you have this FM radio card. You also need to enable
	  the ALSA sound system. This choice automatically selects the ALSA
	  sound card driver "Miro miroSOUND PCM1pro/PCM12/PCM20radio" as this
	  is required for the radio-miropcm20.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-miropcm20.

config RADIO_SF16FMI
	tristate "SF16-FMI/SF16-FMP/SF16-FMD Radio"
	depends on ISA && VIDEO_V4L2
	---help---
	  Choose Y here if you have one of these FM radio cards.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-sf16fmi.

config RADIO_SF16FMR2
	tristate "SF16-FMR2/SF16-FMD2 Radio"
	depends on ISA && VIDEO_V4L2 && SND
	---help---
	  Choose Y here if you have one of these FM radio cards.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-sf16fmr2.

config RADIO_TERRATEC
	tristate "TerraTec ActiveRadio ISA Standalone"
	depends on ISA && VIDEO_V4L2
	select RADIO_ISA
	---help---
	  Choose Y here if you have this FM radio card.

	  Note: this driver hasn't been tested since a long time due to lack
	  of hardware. If you have this hardware, then please contact the
	  linux-media mailinglist.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-terratec.

config RADIO_TRUST
	tristate "Trust FM radio card"
	depends on ISA && VIDEO_V4L2
	select RADIO_ISA
	help
	  This is a driver for the Trust FM radio cards. Say Y if you have
	  such a card and want to use it under Linux.

	  Note: this driver hasn't been tested since a long time due to lack
	  of hardware. If you have this hardware, then please contact the
	  linux-media mailinglist.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-trust.

config RADIO_TRUST_PORT
	hex "Trust i/o port (usually 0x350 or 0x358)"
	depends on RADIO_TRUST=y
	default "350"
	help
	  Enter the I/O port of your Trust FM radio card. If unsure, try the
	  values "0x350" or "0x358".

config RADIO_TYPHOON
	tristate "Typhoon Radio (a.k.a. EcoRadio)"
	depends on ISA && VIDEO_V4L2
	select RADIO_ISA
	---help---
	  Choose Y here if you have one of these FM radio cards, and then fill
	  in the port address and the frequency used for muting below.

	  Note: this driver hasn't been tested since a long time due to lack
	  of hardware. If you have this hardware, then please contact the
	  linux-media mailinglist.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-typhoon.

config RADIO_TYPHOON_PORT
	hex "Typhoon I/O port (0x316 or 0x336)"
	depends on RADIO_TYPHOON=y
	default "316"
	help
	  Enter the I/O port of your Typhoon or EcoRadio radio card.

config RADIO_TYPHOON_MUTEFREQ
	int "Typhoon frequency set when muting the device (kHz)"
	depends on RADIO_TYPHOON=y
	default "87500"
	help
	  Enter the frequency used for muting the radio. The device is never
	  completely silent. If the volume is just turned down, you can still
	  hear silent voices and music. For that reason, the frequency of the
	  radio device is set to the frequency you can enter here whenever
	  the device is muted. There should be no local radio station at that
	  frequency.

config RADIO_ZOLTRIX
	tristate "Zoltrix Radio"
	depends on ISA && VIDEO_V4L2
	select RADIO_ISA
	---help---
	  Choose Y here if you have one of these FM radio cards, and then fill
	  in the port address below.

	  Note: this driver hasn't been tested since a long time due to lack
	  of hardware. If you have this hardware, then please contact the
	  linux-media mailinglist.

	  To compile this driver as a module, choose M here: the
	  module will be called radio-zoltrix.

config RADIO_ZOLTRIX_PORT
	hex "ZOLTRIX I/O port (0x20c or 0x30c)"
	depends on RADIO_ZOLTRIX=y
	default "20c"
	help
	  Enter the I/O port of your Zoltrix radio card.

endif # V4L_RADIO_ISA_DRIVERS

endif # RADIO_ADAPTERS
Commit	Line	Data
1da177e4 LT	1	#
	2	# Multimedia Video device configuration
	3	#
	4
c5da5afb JE	5	menuconfig RADIO_ADAPTERS
c5da5afb JE	6	bool "Radio Adapters"
057596ee	7	depends on VIDEO_V4L2
724f4a32	8	depends on MEDIA_RADIO_SUPPORT
c5da5afb	9	default y
ff01652c MCC	10	---help---
ff01652c MCC	11	Say Y here to enable selecting AM/FM radio adapters.
c5da5afb	12
057596ee	13	if RADIO_ADAPTERS && VIDEO_V4L2
1da177e4	14
e21d9865 HV	15	config RADIO_SI470X
	16	bool "Silicon Labs Si470x FM Radio Receiver support"
	17	depends on VIDEO_V4L2
	18
	19	source "drivers/media/radio/si470x/Kconfig"
	20
b879a9c2 AS	21	config RADIO_SI476X
	22	tristate "Silicon Laboratories Si476x I2C FM Radio"
	23	depends on I2C && VIDEO_V4L2
	24	depends on MFD_SI476X_CORE
ea457ad9	25	depends on SND_SOC
b879a9c2 AS	26	select SND_SOC_SI476X
	27	---help---
	28	Choose Y here if you have this FM radio chip.
	29
	30	In order to control your radio card, you will need to use programs
	31	that are compatible with the Video For Linux 2 API. Information on
	32	this API and pointers to "v4l2" programs may be found at
	33	<file:Documentation/video4linux/API.html>.
	34
	35	To compile this driver as a module, choose M here: the
	36	module will be called radio-si476x.
	37
e21d9865 HV	38	config USB_MR800
	39	tristate "AverMedia MR 800 USB FM radio support"
	40	depends on USB && VIDEO_V4L2
	41	---help---
	42	Say Y here if you want to connect this type of radio to your
	43	computer's USB port. Note that the audio is not digital, and
	44	you must connect the line out connector to a sound card or a
	45	set of speakers.
	46
	47	To compile this driver as a module, choose M here: the
	48	module will be called radio-mr800.
	49
	50	config USB_DSBR
	51	tristate "D-Link/GemTek USB FM radio support"
	52	depends on USB && VIDEO_V4L2
	53	---help---
	54	Say Y here if you want to connect this type of radio to your
	55	computer's USB port. Note that the audio is not digital, and
	56	you must connect the line out connector to a sound card or a
	57	set of speakers.
	58
	59	To compile this driver as a module, choose M here: the
	60	module will be called dsbr100.
	61
	62	config RADIO_MAXIRADIO
	63	tristate "Guillemot MAXI Radio FM 2000 radio"
cfb19b0a	64	depends on VIDEO_V4L2 && PCI && SND
e21d9865 HV	65	---help---
	66	Choose Y here if you have this radio card. This card may also be
	67	found as Gemtek PCI FM.
	68
	69	In order to control your radio card, you will need to use programs
	70	that are compatible with the Video For Linux API. Information on
	71	this API and pointers to "v4l" programs may be found at
	72	<file:Documentation/video4linux/API.html>.
	73
	74	To compile this driver as a module, choose M here: the
	75	module will be called radio-maxiradio.
	76
8e2ce73e HG	77	config RADIO_SHARK
	78	tristate "Griffin radioSHARK USB radio receiver"
	79	depends on USB && SND
	80	---help---
	81	Choose Y here if you have this radio receiver.
	82
	83	There are 2 versions of this device, this driver is for version 1,
	84	which is white.
	85
	86	In order to control your radio card, you will need to use programs
	87	that are compatible with the Video For Linux API. Information on
	88	this API and pointers to "v4l" programs may be found at
	89	<file:Documentation/video4linux/API.html>.
	90
	91	To compile this driver as a module, choose M here: the
	92	module will be called radio-shark.
e21d9865	93
4faba767 HG	94	config RADIO_SHARK2
	95	tristate "Griffin radioSHARK2 USB radio receiver"
	96	depends on USB
	97	---help---
	98	Choose Y here if you have this radio receiver.
	99
	100	There are 2 versions of this device, this driver is for version 2,
	101	which is black.
	102
	103	In order to control your radio card, you will need to use programs
	104	that are compatible with the Video For Linux API. Information on
	105	this API and pointers to "v4l" programs may be found at
	106	<file:Documentation/video4linux/API.html>.
	107
	108	To compile this driver as a module, choose M here: the
	109	module will be called radio-shark2.
	110
e21d9865 HV	111	config I2C_SI4713
	112	tristate "I2C driver for Silicon Labs Si4713 device"
	113	depends on I2C && VIDEO_V4L2
	114	---help---
	115	Say Y here if you want support to Si4713 I2C device.
	116	This device driver supports only i2c bus.
	117
	118	To compile this driver as a module, choose M here: the
	119	module will be called si4713.
	120
	121	config RADIO_SI4713
	122	tristate "Silicon Labs Si4713 FM Radio Transmitter support"
	123	depends on I2C && VIDEO_V4L2
	124	select I2C_SI4713
	125	---help---
	126	Say Y here if you want support to Si4713 FM Radio Transmitter.
	127	This device can transmit audio through FM. It can transmit
	128	RDS and RBDS signals as well. This module is the v4l2 radio
	129	interface for the i2c driver of this device.
	130
	131	To compile this driver as a module, choose M here: the
	132	module will be called radio-si4713.
	133
1bf20c3a HV	134	config USB_KEENE
	135	tristate "Keene FM Transmitter USB support"
	136	depends on USB && VIDEO_V4L2
	137	---help---
	138	Say Y here if you want to connect this type of FM transmitter
	139	to your computer's USB port.
	140
	141	To compile this driver as a module, choose M here: the
	142	module will be called radio-keene.
	143
4834f4d1 AK	144	config USB_MA901
	145	tristate "Masterkit MA901 USB FM radio support"
	146	depends on USB && VIDEO_V4L2
	147	---help---
	148	Say Y here if you want to connect this type of radio to your
	149	computer's USB port. Note that the audio is not digital, and
	150	you must connect the line out connector to a sound card or a
	151	set of speakers or headphones.
	152
	153	To compile this driver as a module, choose M here: the
	154	module will be called radio-ma901.
	155
e21d9865 HV	156	config RADIO_TEA5764
	157	tristate "TEA5764 I2C FM radio support"
	158	depends on I2C && VIDEO_V4L2
	159	---help---
	160	Say Y here if you want to use the TEA5764 FM chip found in
	161	EZX phones. This FM chip is present in EZX phones from Motorola,
	162	connected to internal pxa I2C bus.
	163
	164	To compile this driver as a module, choose M here: the
	165	module will be called radio-tea5764.
	166
	167	config RADIO_TEA5764_XTAL
	168	bool "TEA5764 crystal reference"
	169	depends on RADIO_TEA5764=y
	170	default y
	171	help
	172	Say Y here if TEA5764 have a 32768 Hz crystal in circuit, say N
	173	here if TEA5764 reference frequency is connected in FREQIN.
	174
	175	config RADIO_SAA7706H
	176	tristate "SAA7706H Car Radio DSP"
	177	depends on I2C && VIDEO_V4L2
	178	---help---
	179	Say Y here if you want to use the SAA7706H Car radio Digital
	180	Signal Processor, found for instance on the Russellville development
	181	board. On the russellville the device is connected to internal
	182	timberdale I2C bus.
	183
	184	To compile this driver as a module, choose M here: the
	185	module will be called SAA7706H.
	186
	187	config RADIO_TEF6862
	188	tristate "TEF6862 Car Radio Enhanced Selectivity Tuner"
	189	depends on I2C && VIDEO_V4L2
	190	---help---
	191	Say Y here if you want to use the TEF6862 Car Radio Enhanced
	192	Selectivity Tuner, found for instance on the Russellville development
	193	board. On the russellville the device is connected to internal
	194	timberdale I2C bus.
	195
	196	To compile this driver as a module, choose M here: the
	197	module will be called TEF6862.
	198
	199	config RADIO_TIMBERDALE
	200	tristate "Enable the Timberdale radio driver"
	201	depends on MFD_TIMBERDALE && VIDEO_V4L2
	202	depends on I2C # for RADIO_SAA7706H
	203	select RADIO_TEF6862
	204	select RADIO_SAA7706H
	205	---help---
	206	This is a kind of umbrella driver for the Radio Tuner and DSP
	207	found behind the Timberdale FPGA on the Russellville board.
	208	Enabling this driver will automatically select the DSP and tuner.
	209
	210	config RADIO_WL1273
	211	tristate "Texas Instruments WL1273 I2C FM Radio"
fa364fc4	212	depends on I2C && VIDEO_V4L2 && GENERIC_HARDIRQS
e21d9865 HV	213	select MFD_CORE
	214	select MFD_WL1273_CORE
	215	select FW_LOADER
	216	---help---
	217	Choose Y here if you have this FM radio chip.
	218
	219	In order to control your radio card, you will need to use programs
	220	that are compatible with the Video For Linux 2 API. Information on
	221	this API and pointers to "v4l2" programs may be found at
	222	<file:Documentation/video4linux/API.html>.
	223
	224	To compile this driver as a module, choose M here: the
	225	module will be called radio-wl1273.
	226
	227	# TI's ST based wl128x FM radio
	228	source "drivers/media/radio/wl128x/Kconfig"
	229
	230	#
	231	# ISA drivers configuration
	232	#
	233
	234	menuconfig V4L_RADIO_ISA_DRIVERS
	235	bool "ISA radio devices"
	236	depends on ISA
	237	default n
	238	---help---
	239	Say Y here to enable support for these ISA drivers.
	240
	241	if V4L_RADIO_ISA_DRIVERS
	242
137c579c HV	243	config RADIO_ISA
	244	depends on ISA
	245	tristate
	246
1da177e4 LT	247	config RADIO_CADET
1da177e4 LT	248	tristate "ADS Cadet AM/FM Tuner"
c0c7fa09	249	depends on ISA && VIDEO_V4L2
1da177e4 LT	250	---help---
	251	Choose Y here if you have one of these AM/FM radio cards, and then
	252	fill in the port address below.
	253
1da177e4 LT	254	To compile this driver as a module, choose M here: the
	255	module will be called radio-cadet.
	256
	257	config RADIO_RTRACK
	258	tristate "AIMSlab RadioTrack (aka RadioReveal) support"
46ff2c72	259	depends on ISA && VIDEO_V4L2
cc3c6df1	260	select RADIO_ISA
1da177e4 LT	261	---help---
	262	Choose Y here if you have one of these FM radio cards, and then fill
	263	in the port address below.
	264
	265	Note that newer AIMSlab RadioTrack cards have a different chipset
	266	and are not supported by this driver. For these cards, use the
	267	RadioTrack II driver below.
	268
	269	If you have a GemTeks combined (PnP) sound- and radio card you must
	270	use this driver as a module and setup the card with isapnptools.
	271	You must also pass the module a suitable io parameter, 0x248 has
	272	been reported to be used by these cards.
	273
cc3c6df1	274	More information is contained in the file
1da177e4 LT	275	<file:Documentation/video4linux/radiotrack.txt>.
	276
	277	To compile this driver as a module, choose M here: the
	278	module will be called radio-aimslab.
	279
	280	config RADIO_RTRACK_PORT
	281	hex "RadioTrack i/o port (0x20f or 0x30f)"
	282	depends on RADIO_RTRACK=y
cc3c6df1	283	default "30f"
1da177e4 LT	284	help
	285	Enter either 0x30f or 0x20f here. The card default is 0x30f, if you
	286	haven't changed the jumper setting on the card.
	287
	288	config RADIO_RTRACK2
	289	tristate "AIMSlab RadioTrack II support"
f8c559f8	290	depends on ISA && VIDEO_V4L2
8bd7ef5a	291	select RADIO_ISA
1da177e4 LT	292	---help---
	293	Choose Y here if you have this FM radio card, and then fill in the
	294	port address below.
	295
8bd7ef5a HV	296	Note: this driver hasn't been tested since a long time due to lack
	297	of hardware. If you have this hardware, then please contact the
	298	linux-media mailinglist.
1da177e4 LT	299
	300	To compile this driver as a module, choose M here: the
	301	module will be called radio-rtrack2.
	302
	303	config RADIO_RTRACK2_PORT
	304	hex "RadioTrack II i/o port (0x20c or 0x30c)"
	305	depends on RADIO_RTRACK2=y
	306	default "30c"
	307	help
	308	Enter either 0x30c or 0x20c here. The card default is 0x30c, if you
	309	haven't changed the jumper setting on the card.
	310
	311	config RADIO_AZTECH
	312	tristate "Aztech/Packard Bell Radio"
a4366af4	313	depends on ISA && VIDEO_V4L2
3088fba8	314	select RADIO_ISA
1da177e4 LT	315	---help---
	316	Choose Y here if you have one of these FM radio cards, and then fill
	317	in the port address below.
	318
1da177e4 LT	319	To compile this driver as a module, choose M here: the
	320	module will be called radio-aztech.
	321
	322	config RADIO_AZTECH_PORT
	323	hex "Aztech/Packard Bell I/O port (0x350 or 0x358)"
	324	depends on RADIO_AZTECH=y
	325	default "350"
	326	help
	327	Enter either 0x350 or 0x358 here. The card default is 0x350, if you
	328	haven't changed the setting of jumper JP3 on the card. Removing the
	329	jumper sets the card to 0x358.
	330
	331	config RADIO_GEMTEK
3e7589c5	332	tristate "GemTek Radio card (or compatible) support"
d1c4ecde	333	depends on ISA && VIDEO_V4L2
f8c08524	334	select RADIO_ISA
1da177e4 LT	335	---help---
1da177e4 LT	336	Choose Y here if you have this FM radio card, and then fill in the
3e7589c5 PS	337	I/O port address and settings below. The following cards either have
	338	GemTek Radio tuner or are rebranded GemTek Radio cards:
	339
	340	- Sound Vision 16 Gold with FM Radio
	341	- Typhoon Radio card (some models)
	342	- Hama Radio card
1da177e4	343
1da177e4 LT	344	To compile this driver as a module, choose M here: the
	345	module will be called radio-gemtek.
	346
	347	config RADIO_GEMTEK_PORT
f8c08524	348	hex "Fixed I/O port (0x20c, 0x30c, 0x24c, 0x34c, 0x248 or 0x28c)"
1da177e4 LT	349	depends on RADIO_GEMTEK=y
	350	default "34c"
	351	help
f8c08524 HV	352	Enter either 0x20c, 0x30c, 0x24c, 0x34c, 0x248 or 0x28c here. The
	353	card default is 0x34c, if you haven't changed the jumper setting
	354	on the card.
	355
	356	On Sound Vision 16 Gold PnP with FM Radio (ESS1869+FM Gemtek), the I/O
3e7589c5	357	port is 0x20c, 0x248 or 0x28c.
f8c08524	358
3e7589c5 PS	359	If automatic I/O port probing is enabled this port will be used only
	360	in case of automatic probing failure, ie. as a fallback.
	361
	362	config RADIO_GEMTEK_PROBE
	363	bool "Automatic I/O port probing"
	364	depends on RADIO_GEMTEK=y
	365	default y
	366	help
	367	Say Y here to enable automatic probing for GemTek Radio card. The
	368	following ports will be probed: 0x20c, 0x30c, 0x24c, 0x34c, 0x248 and
	369	0x28c.
1da177e4	370
8366fc39 KH	371	config RADIO_MIROPCM20
8366fc39 KH	372	tristate "miroSOUND PCM20 radio"
4756fc64	373	depends on ISA && ISA_DMA_API && VIDEO_V4L2 && SND
dd7cdb88	374	select SND_ISA
8366fc39 KH	375	select SND_MIRO
	376	---help---
	377	Choose Y here if you have this FM radio card. You also need to enable
	378	the ALSA sound system. This choice automatically selects the ALSA
	379	sound card driver "Miro miroSOUND PCM1pro/PCM12/PCM20radio" as this
	380	is required for the radio-miropcm20.
	381
8366fc39 KH	382	To compile this driver as a module, choose M here: the
8366fc39 KH	383	module will be called radio-miropcm20.
1da177e4	384
1da177e4	385	config RADIO_SF16FMI
abed623c	386	tristate "SF16-FMI/SF16-FMP/SF16-FMD Radio"
a2ef73af	387	depends on ISA && VIDEO_V4L2
1da177e4	388	---help---
67cabf50	389	Choose Y here if you have one of these FM radio cards.
1da177e4	390
1da177e4 LT	391	To compile this driver as a module, choose M here: the
	392	module will be called radio-sf16fmi.
	393
	394	config RADIO_SF16FMR2
3491a88e	395	tristate "SF16-FMR2/SF16-FMD2 Radio"
42a741dc	396	depends on ISA && VIDEO_V4L2 && SND
1da177e4 LT	397	---help---
	398	Choose Y here if you have one of these FM radio cards.
	399
1da177e4 LT	400	To compile this driver as a module, choose M here: the
	401	module will be called radio-sf16fmr2.
	402
	403	config RADIO_TERRATEC
	404	tristate "TerraTec ActiveRadio ISA Standalone"
55ac7b69	405	depends on ISA && VIDEO_V4L2
32c51836	406	select RADIO_ISA
1da177e4	407	---help---
32c51836	408	Choose Y here if you have this FM radio card.
1da177e4	409
32c51836 HV	410	Note: this driver hasn't been tested since a long time due to lack
	411	of hardware. If you have this hardware, then please contact the
	412	linux-media mailinglist.
1da177e4 LT	413
	414	To compile this driver as a module, choose M here: the
	415	module will be called radio-terratec.
	416
1da177e4 LT	417	config RADIO_TRUST
1da177e4 LT	418	tristate "Trust FM radio card"
982eddb9	419	depends on ISA && VIDEO_V4L2
1d211f26	420	select RADIO_ISA
1da177e4 LT	421	help
	422	This is a driver for the Trust FM radio cards. Say Y if you have
	423	such a card and want to use it under Linux.
	424
1d211f26 HV	425	Note: this driver hasn't been tested since a long time due to lack
	426	of hardware. If you have this hardware, then please contact the
	427	linux-media mailinglist.
	428
1da177e4 LT	429	To compile this driver as a module, choose M here: the
	430	module will be called radio-trust.
	431
	432	config RADIO_TRUST_PORT
	433	hex "Trust i/o port (usually 0x350 or 0x358)"
	434	depends on RADIO_TRUST=y
	435	default "350"
	436	help
	437	Enter the I/O port of your Trust FM radio card. If unsure, try the
	438	values "0x350" or "0x358".
	439
	440	config RADIO_TYPHOON
	441	tristate "Typhoon Radio (a.k.a. EcoRadio)"
30c48305	442	depends on ISA && VIDEO_V4L2
da1ff351	443	select RADIO_ISA
1da177e4 LT	444	---help---
	445	Choose Y here if you have one of these FM radio cards, and then fill
	446	in the port address and the frequency used for muting below.
	447
da1ff351 HV	448	Note: this driver hasn't been tested since a long time due to lack
	449	of hardware. If you have this hardware, then please contact the
	450	linux-media mailinglist.
1da177e4 LT	451
	452	To compile this driver as a module, choose M here: the
	453	module will be called radio-typhoon.
	454
1da177e4 LT	455	config RADIO_TYPHOON_PORT
	456	hex "Typhoon I/O port (0x316 or 0x336)"
	457	depends on RADIO_TYPHOON=y
	458	default "316"
	459	help
	460	Enter the I/O port of your Typhoon or EcoRadio radio card.
	461
	462	config RADIO_TYPHOON_MUTEFREQ
	463	int "Typhoon frequency set when muting the device (kHz)"
	464	depends on RADIO_TYPHOON=y
	465	default "87500"
	466	help
	467	Enter the frequency used for muting the radio. The device is never
	468	completely silent. If the volume is just turned down, you can still
	469	hear silent voices and music. For that reason, the frequency of the
	470	radio device is set to the frequency you can enter here whenever
	471	the device is muted. There should be no local radio station at that
	472	frequency.
	473
	474	config RADIO_ZOLTRIX
	475	tristate "Zoltrix Radio"
2ab65299	476	depends on ISA && VIDEO_V4L2
6b39246c	477	select RADIO_ISA
1da177e4 LT	478	---help---
	479	Choose Y here if you have one of these FM radio cards, and then fill
	480	in the port address below.
	481
6b39246c HV	482	Note: this driver hasn't been tested since a long time due to lack
	483	of hardware. If you have this hardware, then please contact the
	484	linux-media mailinglist.
1da177e4 LT	485
	486	To compile this driver as a module, choose M here: the
	487	module will be called radio-zoltrix.
	488
	489	config RADIO_ZOLTRIX_PORT
	490	hex "ZOLTRIX I/O port (0x20c or 0x30c)"
	491	depends on RADIO_ZOLTRIX=y
	492	default "20c"
	493	help
	494	Enter the I/O port of your Zoltrix radio card.
	495
e21d9865	496	endif # V4L_RADIO_ISA_DRIVERS
57f05bfa	497
c5da5afb	498	endif # RADIO_ADAPTERS