[GitHub/mt8127/android_kernel_alcatel_ttab.git] / drivers / ide / tc86c001.c

/*
 * Copyright (C) 2002 Toshiba Corporation
 * Copyright (C) 2005-2006 MontaVista Software, Inc. <source@mvista.com>
 *
 * This file is licensed under the terms of the GNU General Public
 * License version 2.  This program is licensed "as is" without any
 * warranty of any kind, whether express or implied.
 */

#include <linux/types.h>
#include <linux/pci.h>
#include <linux/ide.h>
#include <linux/module.h>

#define DRV_NAME "tc86c001"

static void tc86c001_set_mode(ide_hwif_t *hwif, ide_drive_t *drive)
{
	unsigned long scr_port	= hwif->config_data + (drive->dn ? 0x02 : 0x00);
	u16 mode, scr		= inw(scr_port);
	const u8 speed		= drive->dma_mode;

	switch (speed) {
	case XFER_UDMA_4:	mode = 0x00c0; break;
	case XFER_UDMA_3:	mode = 0x00b0; break;
	case XFER_UDMA_2:	mode = 0x00a0; break;
	case XFER_UDMA_1:	mode = 0x0090; break;
	case XFER_UDMA_0:	mode = 0x0080; break;
	case XFER_MW_DMA_2:	mode = 0x0070; break;
	case XFER_MW_DMA_1:	mode = 0x0060; break;
	case XFER_MW_DMA_0:	mode = 0x0050; break;
	case XFER_PIO_4:	mode = 0x0400; break;
	case XFER_PIO_3:	mode = 0x0300; break;
	case XFER_PIO_2:	mode = 0x0200; break;
	case XFER_PIO_1:	mode = 0x0100; break;
	case XFER_PIO_0:
	default:		mode = 0x0000; break;
	}

	scr &= (speed < XFER_MW_DMA_0) ? 0xf8ff : 0xff0f;
	scr |= mode;
	outw(scr, scr_port);
}

static void tc86c001_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
{
	drive->dma_mode = drive->pio_mode;
	tc86c001_set_mode(hwif, drive);
}

/*
 * HACKITY HACK
 *
 * This is a workaround for the limitation 5 of the TC86C001 IDE controller:
 * if a DMA transfer terminates prematurely, the controller leaves the device's
 * interrupt request (INTRQ) pending and does not generate a PCI interrupt (or
 * set the interrupt bit in the DMA status register), thus no PCI interrupt
 * will occur until a DMA transfer has been successfully completed.
 *
 * We work around this by initiating dummy, zero-length DMA transfer on
 * a DMA timeout expiration. I found no better way to do this with the current
 * IDE core than to temporarily replace a higher level driver's timer expiry
 * handler with our own backing up to that handler in case our recovery fails.
 */
static int tc86c001_timer_expiry(ide_drive_t *drive)
{
	ide_hwif_t *hwif	= drive->hwif;
	ide_expiry_t *expiry	= ide_get_hwifdata(hwif);
	u8 dma_stat		= inb(hwif->dma_base + ATA_DMA_STATUS);

	/* Restore a higher level driver's expiry handler first. */
	hwif->expiry = expiry;

	if ((dma_stat & 5) == 1) {	/* DMA active and no interrupt */
		unsigned long sc_base	= hwif->config_data;
		unsigned long twcr_port	= sc_base + (drive->dn ? 0x06 : 0x04);
		u8 dma_cmd		= inb(hwif->dma_base + ATA_DMA_CMD);

		printk(KERN_WARNING "%s: DMA interrupt possibly stuck, "
		       "attempting recovery...\n", drive->name);

		/* Stop DMA */
		outb(dma_cmd & ~0x01, hwif->dma_base + ATA_DMA_CMD);

		/* Setup the dummy DMA transfer */
		outw(0, sc_base + 0x0a);	/* Sector Count */
		outw(0, twcr_port);	/* Transfer Word Count 1 or 2 */

		/* Start the dummy DMA transfer */

		/* clear R_OR_WCTR for write */
		outb(0x00, hwif->dma_base + ATA_DMA_CMD);
		/* set START_STOPBM */
		outb(0x01, hwif->dma_base + ATA_DMA_CMD);

		/*
		 * If an interrupt was pending, it should come thru shortly.
		 * If not, a higher level driver's expiry handler should
		 * eventually cause some kind of recovery from the DMA stall.
		 */
		return WAIT_MIN_SLEEP;
	}

	/* Chain to the restored expiry handler if DMA wasn't active. */
	if (likely(expiry != NULL))
		return expiry(drive);

	/* If there was no handler, "emulate" that for ide_timer_expiry()... */
	return -1;
}

static void tc86c001_dma_start(ide_drive_t *drive)
{
	ide_hwif_t *hwif	= drive->hwif;
	unsigned long sc_base	= hwif->config_data;
	unsigned long twcr_port	= sc_base + (drive->dn ? 0x06 : 0x04);
	unsigned long nsectors	= blk_rq_sectors(hwif->rq);

	/*
	 * We have to manually load the sector count and size into
	 * the appropriate system control registers for DMA to work
	 * with LBA48 and ATAPI devices...
	 */
	outw(nsectors, sc_base + 0x0a);	/* Sector Count */
	outw(SECTOR_SIZE / 2, twcr_port); /* Transfer Word Count 1/2 */

	/* Install our timeout expiry hook, saving the current handler... */
	ide_set_hwifdata(hwif, hwif->expiry);
	hwif->expiry = &tc86c001_timer_expiry;

	ide_dma_start(drive);
}

static u8 tc86c001_cable_detect(ide_hwif_t *hwif)
{
	struct pci_dev *dev = to_pci_dev(hwif->dev);
	unsigned long sc_base = pci_resource_start(dev, 5);
	u16 scr1 = inw(sc_base + 0x00);

	/*
	 * System Control  1 Register bit 13 (PDIAGN):
	 * 0=80-pin cable, 1=40-pin cable
	 */
	return (scr1 & 0x2000) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
}

static void init_hwif_tc86c001(ide_hwif_t *hwif)
{
	struct pci_dev *dev	= to_pci_dev(hwif->dev);
	unsigned long sc_base	= pci_resource_start(dev, 5);
	u16 scr1		= inw(sc_base + 0x00);

	/* System Control 1 Register bit 15 (Soft Reset) set */
	outw(scr1 |  0x8000, sc_base + 0x00);

	/* System Control 1 Register bit 14 (FIFO Reset) set */
	outw(scr1 |  0x4000, sc_base + 0x00);

	/* System Control 1 Register: reset clear */
	outw(scr1 & ~0xc000, sc_base + 0x00);

	/* Store the system control register base for convenience... */
	hwif->config_data = sc_base;

	if (!hwif->dma_base)
		return;

	/*
	 * Sector Count Control Register bits 0 and 1 set:
	 * software sets Sector Count Register for master and slave device
	 */
	outw(0x0003, sc_base + 0x0c);

	/* Sector Count Register limit */
	hwif->rqsize	 = 0xffff;
}

static const struct ide_port_ops tc86c001_port_ops = {
	.set_pio_mode		= tc86c001_set_pio_mode,
	.set_dma_mode		= tc86c001_set_mode,
	.cable_detect		= tc86c001_cable_detect,
};

static const struct ide_dma_ops tc86c001_dma_ops = {
	.dma_host_set		= ide_dma_host_set,
	.dma_setup		= ide_dma_setup,
	.dma_start		= tc86c001_dma_start,
	.dma_end		= ide_dma_end,
	.dma_test_irq		= ide_dma_test_irq,
	.dma_lost_irq		= ide_dma_lost_irq,
	.dma_timer_expiry	= ide_dma_sff_timer_expiry,
	.dma_sff_read_status	= ide_dma_sff_read_status,
};

static const struct ide_port_info tc86c001_chipset = {
	.name		= DRV_NAME,
	.init_hwif	= init_hwif_tc86c001,
	.port_ops	= &tc86c001_port_ops,
	.dma_ops	= &tc86c001_dma_ops,
	.host_flags	= IDE_HFLAG_SINGLE | IDE_HFLAG_OFF_BOARD,
	.pio_mask	= ATA_PIO4,
	.mwdma_mask	= ATA_MWDMA2,
	.udma_mask	= ATA_UDMA4,
};

static int tc86c001_init_one(struct pci_dev *dev,
			     const struct pci_device_id *id)
{
	int rc;

	rc = pci_enable_device(dev);
	if (rc)
		goto out;

	rc = pci_request_region(dev, 5, DRV_NAME);
	if (rc) {
		printk(KERN_ERR DRV_NAME ": system control regs already in use");
		goto out_disable;
	}

	rc = ide_pci_init_one(dev, &tc86c001_chipset, NULL);
	if (rc)
		goto out_release;

	goto out;

out_release:
	pci_release_region(dev, 5);
out_disable:
	pci_disable_device(dev);
out:
	return rc;
}

static void tc86c001_remove(struct pci_dev *dev)
{
	ide_pci_remove(dev);
	pci_release_region(dev, 5);
	pci_disable_device(dev);
}

static const struct pci_device_id tc86c001_pci_tbl[] = {
	{ PCI_VDEVICE(TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_TC86C001_IDE), 0 },
	{ 0, }
};
MODULE_DEVICE_TABLE(pci, tc86c001_pci_tbl);

static struct pci_driver tc86c001_pci_driver = {
	.name		= "TC86C001",
	.id_table	= tc86c001_pci_tbl,
	.probe		= tc86c001_init_one,
	.remove		= tc86c001_remove,
};

static int __init tc86c001_ide_init(void)
{
	return ide_pci_register_driver(&tc86c001_pci_driver);
}

static void __exit tc86c001_ide_exit(void)
{
	pci_unregister_driver(&tc86c001_pci_driver);
}

module_init(tc86c001_ide_init);
module_exit(tc86c001_ide_exit);

MODULE_AUTHOR("MontaVista Software, Inc. <source@mvista.com>");
MODULE_DESCRIPTION("PCI driver module for TC86C001 IDE");
MODULE_LICENSE("GPL");
Commit	Line	Data
33dced2e	1	/*
33dced2e SS	2	* Copyright (C) 2002 Toshiba Corporation
	3	* Copyright (C) 2005-2006 MontaVista Software, Inc. <source@mvista.com>
	4	*
	5	* This file is licensed under the terms of the GNU General Public
	6	* License version 2. This program is licensed "as is" without any
	7	* warranty of any kind, whether express or implied.
	8	*/
	9
	10	#include <linux/types.h>
	11	#include <linux/pci.h>
	12	#include <linux/ide.h>
bff7832d	13	#include <linux/module.h>
33dced2e	14
ced3ec8a	15	#define DRV_NAME "tc86c001"
b16040b1	16
8776168c	17	static void tc86c001_set_mode(ide_hwif_t hwif, ide_drive_t drive)
33dced2e	18	{
33dced2e	19	unsigned long scr_port = hwif->config_data + (drive->dn ? 0x02 : 0x00);
31e8a465	20	u16 mode, scr = inw(scr_port);
8776168c	21	const u8 speed = drive->dma_mode;
33dced2e	22
33dced2e	23	switch (speed) {
5c634bb9 PC	24	case XFER_UDMA_4: mode = 0x00c0; break;
	25	case XFER_UDMA_3: mode = 0x00b0; break;
	26	case XFER_UDMA_2: mode = 0x00a0; break;
	27	case XFER_UDMA_1: mode = 0x0090; break;
	28	case XFER_UDMA_0: mode = 0x0080; break;
	29	case XFER_MW_DMA_2: mode = 0x0070; break;
	30	case XFER_MW_DMA_1: mode = 0x0060; break;
	31	case XFER_MW_DMA_0: mode = 0x0050; break;
	32	case XFER_PIO_4: mode = 0x0400; break;
	33	case XFER_PIO_3: mode = 0x0300; break;
	34	case XFER_PIO_2: mode = 0x0200; break;
	35	case XFER_PIO_1: mode = 0x0100; break;
	36	case XFER_PIO_0:
	37	default: mode = 0x0000; break;
33dced2e SS	38	}
	39
	40	scr &= (speed < XFER_MW_DMA_0) ? 0xf8ff : 0xff0f;
	41	scr \|= mode;
0ecdca26	42	outw(scr, scr_port);
33dced2e SS	43	}
33dced2e SS	44
e085b3ca	45	static void tc86c001_set_pio_mode(ide_hwif_t hwif, ide_drive_t drive)
33dced2e	46	{
8776168c BZ	47	drive->dma_mode = drive->pio_mode;
8776168c BZ	48	tc86c001_set_mode(hwif, drive);
33dced2e SS	49	}
	50
	51	/*
	52	* HACKITY HACK
	53	*
	54	* This is a workaround for the limitation 5 of the TC86C001 IDE controller:
	55	* if a DMA transfer terminates prematurely, the controller leaves the device's
	56	* interrupt request (INTRQ) pending and does not generate a PCI interrupt (or
	57	* set the interrupt bit in the DMA status register), thus no PCI interrupt
	58	* will occur until a DMA transfer has been successfully completed.
	59	*
	60	* We work around this by initiating dummy, zero-length DMA transfer on
	61	* a DMA timeout expiration. I found no better way to do this with the current
	62	* IDE core than to temporarily replace a higher level driver's timer expiry
	63	* handler with our own backing up to that handler in case our recovery fails.
	64	*/
	65	static int tc86c001_timer_expiry(ide_drive_t *drive)
	66	{
898ec223	67	ide_hwif_t *hwif = drive->hwif;
33dced2e	68	ide_expiry_t *expiry = ide_get_hwifdata(hwif);
cab7f8ed	69	u8 dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS);
33dced2e SS	70
33dced2e SS	71	/* Restore a higher level driver's expiry handler first. */
b65fac32	72	hwif->expiry = expiry;
33dced2e SS	73
	74	if ((dma_stat & 5) == 1) { /* DMA active and no interrupt */
	75	unsigned long sc_base = hwif->config_data;
	76	unsigned long twcr_port = sc_base + (drive->dn ? 0x06 : 0x04);
cab7f8ed	77	u8 dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD);
33dced2e SS	78
	79	printk(KERN_WARNING "%s: DMA interrupt possibly stuck, "
	80	"attempting recovery...\n", drive->name);
	81
	82	/* Stop DMA */
cab7f8ed	83	outb(dma_cmd & ~0x01, hwif->dma_base + ATA_DMA_CMD);
33dced2e SS	84
33dced2e SS	85	/* Setup the dummy DMA transfer */
0ecdca26 BZ	86	outw(0, sc_base + 0x0a); /* Sector Count */
0ecdca26 BZ	87	outw(0, twcr_port); /* Transfer Word Count 1 or 2 */
33dced2e SS	88
33dced2e SS	89	/* Start the dummy DMA transfer */
cab7f8ed BZ	90
	91	/* clear R_OR_WCTR for write */
	92	outb(0x00, hwif->dma_base + ATA_DMA_CMD);
	93	/* set START_STOPBM */
	94	outb(0x01, hwif->dma_base + ATA_DMA_CMD);
33dced2e SS	95
	96	/*
	97	* If an interrupt was pending, it should come thru shortly.
	98	* If not, a higher level driver's expiry handler should
	99	* eventually cause some kind of recovery from the DMA stall.
	100	*/
	101	return WAIT_MIN_SLEEP;
	102	}
	103
	104	/* Chain to the restored expiry handler if DMA wasn't active. */
	105	if (likely(expiry != NULL))
	106	return expiry(drive);
	107
	108	/* If there was no handler, "emulate" that for ide_timer_expiry()... */
	109	return -1;
	110	}
	111
	112	static void tc86c001_dma_start(ide_drive_t *drive)
	113	{
898ec223	114	ide_hwif_t *hwif = drive->hwif;
33dced2e SS	115	unsigned long sc_base = hwif->config_data;
33dced2e SS	116	unsigned long twcr_port = sc_base + (drive->dn ? 0x06 : 0x04);
9780e2dd	117	unsigned long nsectors = blk_rq_sectors(hwif->rq);
33dced2e SS	118
	119	/*
	120	* We have to manually load the sector count and size into
	121	* the appropriate system control registers for DMA to work
	122	* with LBA48 and ATAPI devices...
	123	*/
0ecdca26 BZ	124	outw(nsectors, sc_base + 0x0a); /* Sector Count */
0ecdca26 BZ	125	outw(SECTOR_SIZE / 2, twcr_port); /* Transfer Word Count 1/2 */
33dced2e SS	126
33dced2e SS	127	/* Install our timeout expiry hook, saving the current handler... */
b65fac32 BZ	128	ide_set_hwifdata(hwif, hwif->expiry);
b65fac32 BZ	129	hwif->expiry = &tc86c001_timer_expiry;
33dced2e SS	130
	131	ide_dma_start(drive);
	132	}
	133
f454cbe8	134	static u8 tc86c001_cable_detect(ide_hwif_t *hwif)
bfa14b42 BZ	135	{
	136	struct pci_dev *dev = to_pci_dev(hwif->dev);
	137	unsigned long sc_base = pci_resource_start(dev, 5);
	138	u16 scr1 = inw(sc_base + 0x00);
	139
	140	/*
	141	* System Control 1 Register bit 13 (PDIAGN):
	142	* 0=80-pin cable, 1=40-pin cable
	143	*/
	144	return (scr1 & 0x2000) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
	145	}
	146
fe31edc8	147	static void init_hwif_tc86c001(ide_hwif_t *hwif)
33dced2e	148	{
36501650 BZ	149	struct pci_dev *dev = to_pci_dev(hwif->dev);
36501650 BZ	150	unsigned long sc_base = pci_resource_start(dev, 5);
31e8a465	151	u16 scr1 = inw(sc_base + 0x00);
33dced2e SS	152
33dced2e SS	153	/* System Control 1 Register bit 15 (Soft Reset) set */
0ecdca26	154	outw(scr1 \| 0x8000, sc_base + 0x00);
33dced2e SS	155
33dced2e SS	156	/* System Control 1 Register bit 14 (FIFO Reset) set */
0ecdca26	157	outw(scr1 \| 0x4000, sc_base + 0x00);
33dced2e SS	158
33dced2e SS	159	/* System Control 1 Register: reset clear */
0ecdca26	160	outw(scr1 & ~0xc000, sc_base + 0x00);
33dced2e SS	161
	162	/* Store the system control register base for convenience... */
	163	hwif->config_data = sc_base;
	164
33dced2e SS	165	if (!hwif->dma_base)
	166	return;
	167
	168	/*
	169	* Sector Count Control Register bits 0 and 1 set:
	170	* software sets Sector Count Register for master and slave device
	171	*/
0ecdca26	172	outw(0x0003, sc_base + 0x0c);
33dced2e SS	173
	174	/* Sector Count Register limit */
	175	hwif->rqsize = 0xffff;
33dced2e SS	176	}
33dced2e SS	177
ac95beed BZ	178	static const struct ide_port_ops tc86c001_port_ops = {
	179	.set_pio_mode = tc86c001_set_pio_mode,
	180	.set_dma_mode = tc86c001_set_mode,
	181	.cable_detect = tc86c001_cable_detect,
	182	};
	183
f37afdac BZ	184	static const struct ide_dma_ops tc86c001_dma_ops = {
	185	.dma_host_set = ide_dma_host_set,
	186	.dma_setup = ide_dma_setup,
5e37bdc0	187	.dma_start = tc86c001_dma_start,
653bcf52	188	.dma_end = ide_dma_end,
f37afdac BZ	189	.dma_test_irq = ide_dma_test_irq,
f37afdac BZ	190	.dma_lost_irq = ide_dma_lost_irq,
22117d6e	191	.dma_timer_expiry = ide_dma_sff_timer_expiry,
592b5315	192	.dma_sff_read_status = ide_dma_sff_read_status,
5e37bdc0 BZ	193	};
5e37bdc0 BZ	194
fe31edc8	195	static const struct ide_port_info tc86c001_chipset = {
ced3ec8a	196	.name = DRV_NAME,
33dced2e	197	.init_hwif = init_hwif_tc86c001,
ac95beed	198	.port_ops = &tc86c001_port_ops,
5e37bdc0	199	.dma_ops = &tc86c001_dma_ops,
3b2a5c71	200	.host_flags = IDE_HFLAG_SINGLE \| IDE_HFLAG_OFF_BOARD,
4099d143	201	.pio_mask = ATA_PIO4,
5f8b6c34 BZ	202	.mwdma_mask = ATA_MWDMA2,
5f8b6c34 BZ	203	.udma_mask = ATA_UDMA4,
33dced2e SS	204	};
33dced2e SS	205
fe31edc8 GKH	206	static int tc86c001_init_one(struct pci_dev *dev,
fe31edc8 GKH	207	const struct pci_device_id *id)
33dced2e	208	{
b16040b1 BZ	209	int rc;
	210
	211	rc = pci_enable_device(dev);
	212	if (rc)
	213	goto out;
	214
	215	rc = pci_request_region(dev, 5, DRV_NAME);
	216	if (rc) {
	217	printk(KERN_ERR DRV_NAME ": system control regs already in use");
	218	goto out_disable;
	219	}
	220
	221	rc = ide_pci_init_one(dev, &tc86c001_chipset, NULL);
	222	if (rc)
	223	goto out_release;
	224
	225	goto out;
	226
	227	out_release:
	228	pci_release_region(dev, 5);
	229	out_disable:
	230	pci_disable_device(dev);
	231	out:
	232	return rc;
33dced2e SS	233	}
33dced2e SS	234
fe31edc8	235	static void tc86c001_remove(struct pci_dev *dev)
ea881d6d BZ	236	{
	237	ide_pci_remove(dev);
	238	pci_release_region(dev, 5);
	239	pci_disable_device(dev);
	240	}
	241
9cbcc5e3 BZ	242	static const struct pci_device_id tc86c001_pci_tbl[] = {
9cbcc5e3 BZ	243	{ PCI_VDEVICE(TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_TC86C001_IDE), 0 },
33dced2e SS	244	{ 0, }
	245	};
	246	MODULE_DEVICE_TABLE(pci, tc86c001_pci_tbl);
	247
a9ab09e2	248	static struct pci_driver tc86c001_pci_driver = {
33dced2e SS	249	.name = "TC86C001",
33dced2e SS	250	.id_table = tc86c001_pci_tbl,
ea881d6d	251	.probe = tc86c001_init_one,
fe31edc8	252	.remove = tc86c001_remove,
33dced2e SS	253	};
33dced2e SS	254
a534b68d	255	static int __init tc86c001_ide_init(void)
33dced2e	256	{
a9ab09e2	257	return ide_pci_register_driver(&tc86c001_pci_driver);
33dced2e	258	}
ea881d6d BZ	259
	260	static void __exit tc86c001_ide_exit(void)
	261	{
a9ab09e2	262	pci_unregister_driver(&tc86c001_pci_driver);
ea881d6d BZ	263	}
ea881d6d BZ	264
33dced2e	265	module_init(tc86c001_ide_init);
ea881d6d	266	module_exit(tc86c001_ide_exit);
33dced2e SS	267
	268	MODULE_AUTHOR("MontaVista Software, Inc. <source@mvista.com>");
	269	MODULE_DESCRIPTION("PCI driver module for TC86C001 IDE");
	270	MODULE_LICENSE("GPL");