Merge tag 'v3.10.79' into update
[GitHub/mt8127/android_kernel_alcatel_ttab.git] / drivers / ide / delkin_cb.c
CommitLineData
78281c53 1/*
78281c53
ML
2 * Created 20 Oct 2004 by Mark Lord
3 *
4 * Basic support for Delkin/ASKA/Workbit Cardbus CompactFlash adapter
5 *
6 * Modeled after the 16-bit PCMCIA driver: ide-cs.c
7 *
8 * This is slightly peculiar, in that it is a PCI driver,
9 * but is NOT an IDE PCI driver -- the IDE layer does not directly
10 * support hot insertion/removal of PCI interfaces, so this driver
11 * is unable to use the IDE PCI interfaces. Instead, it uses the
12 * same interfaces as the ide-cs (PCMCIA) driver uses.
13 * On the plus side, the driver is also smaller/simpler this way.
14 *
15 * This file is subject to the terms and conditions of the GNU General Public
16 * License. See the file COPYING in the main directory of this archive for
17 * more details.
18 */
78829dd9 19
78281c53
ML
20#include <linux/types.h>
21#include <linux/module.h>
78281c53
ML
22#include <linux/ide.h>
23#include <linux/init.h>
24#include <linux/pci.h>
78829dd9 25
78281c53
ML
26#include <asm/io.h>
27
28/*
29 * No chip documentation has yet been found,
30 * so these configuration values were pulled from
31 * a running Win98 system using "debug".
32 * This gives around 3MByte/second read performance,
33 * which is about 2/3 of what the chip is capable of.
34 *
35 * There is also a 4KByte mmio region on the card,
36 * but its purpose has yet to be reverse-engineered.
37 */
38static const u8 setup[] = {
39 0x00, 0x05, 0xbe, 0x01, 0x20, 0x8f, 0x00, 0x00,
40 0xa4, 0x1f, 0xb3, 0x1b, 0x00, 0x00, 0x00, 0x80,
41 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
42 0x00, 0x00, 0x00, 0x00, 0xa4, 0x83, 0x02, 0x13,
43};
44
ac95beed
BZ
45static const struct ide_port_ops delkin_cb_port_ops = {
46 .quirkproc = ide_undecoded_slave,
47};
48
2ed0ef54 49static int delkin_cb_init_chipset(struct pci_dev *dev)
8c061a40
BZ
50{
51 unsigned long base = pci_resource_start(dev, 0);
52 int i;
53
54 outb(0x02, base + 0x1e); /* set nIEN to block interrupts */
55 inb(base + 0x17); /* read status to clear interrupts */
56
57 for (i = 0; i < sizeof(setup); ++i) {
58 if (setup[i])
59 outb(setup[i], base + i);
60 }
61
62 return 0;
63}
64
1c4d4ad5
BZ
65static const struct ide_port_info delkin_cb_port_info = {
66 .port_ops = &delkin_cb_port_ops,
67 .host_flags = IDE_HFLAG_IO_32BIT | IDE_HFLAG_UNMASK_IRQS |
68 IDE_HFLAG_NO_DMA,
255115fb 69 .irq_flags = IRQF_SHARED,
8c061a40 70 .init_chipset = delkin_cb_init_chipset,
29e52cf7 71 .chipset = ide_pci,
1c4d4ad5
BZ
72};
73
fe31edc8 74static int delkin_cb_probe(struct pci_dev *dev, const struct pci_device_id *id)
78281c53 75{
48c3c107 76 struct ide_host *host;
78281c53 77 unsigned long base;
8c061a40 78 int rc;
9f36d314 79 struct ide_hw hw, *hws[] = { &hw };
78281c53
ML
80
81 rc = pci_enable_device(dev);
82 if (rc) {
83 printk(KERN_ERR "delkin_cb: pci_enable_device failed (%d)\n", rc);
84 return rc;
85 }
86 rc = pci_request_regions(dev, "delkin_cb");
87 if (rc) {
88 printk(KERN_ERR "delkin_cb: pci_request_regions failed (%d)\n", rc);
89 pci_disable_device(dev);
90 return rc;
91 }
92 base = pci_resource_start(dev, 0);
8c061a40
BZ
93
94 delkin_cb_init_chipset(dev);
78281c53
ML
95
96 memset(&hw, 0, sizeof(hw));
97 ide_std_init_ports(&hw, base + 0x10, base + 0x1e);
98 hw.irq = dev->irq;
8a7dbb97 99 hw.dev = &dev->dev;
78281c53 100
dca39830 101 rc = ide_host_add(&delkin_cb_port_info, hws, 1, &host);
6f904d01 102 if (rc)
9e016a71
BZ
103 goto out_disable;
104
48c3c107 105 pci_set_drvdata(dev, host);
8a7dbb97 106
78281c53 107 return 0;
9e016a71
BZ
108
109out_disable:
7f6f33c1 110 pci_release_regions(dev);
9e016a71 111 pci_disable_device(dev);
6f904d01 112 return rc;
78281c53
ML
113}
114
115static void
116delkin_cb_remove (struct pci_dev *dev)
117{
48c3c107 118 struct ide_host *host = pci_get_drvdata(dev);
78281c53 119
48c3c107 120 ide_host_remove(host);
f82c2b17 121
7f6f33c1 122 pci_release_regions(dev);
78281c53
ML
123 pci_disable_device(dev);
124}
125
8c061a40
BZ
126#ifdef CONFIG_PM
127static int delkin_cb_suspend(struct pci_dev *dev, pm_message_t state)
128{
129 pci_save_state(dev);
130 pci_disable_device(dev);
131 pci_set_power_state(dev, pci_choose_state(dev, state));
132
133 return 0;
134}
135
136static int delkin_cb_resume(struct pci_dev *dev)
137{
138 struct ide_host *host = pci_get_drvdata(dev);
139 int rc;
140
141 pci_set_power_state(dev, PCI_D0);
142
143 rc = pci_enable_device(dev);
144 if (rc)
145 return rc;
146
147 pci_restore_state(dev);
148 pci_set_master(dev);
149
150 if (host->init_chipset)
151 host->init_chipset(dev);
152
153 return 0;
154}
155#else
156#define delkin_cb_suspend NULL
157#define delkin_cb_resume NULL
158#endif
159
fe31edc8 160static struct pci_device_id delkin_cb_pci_tbl[] = {
78281c53 161 { 0x1145, 0xf021, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
2571b16d 162 { 0x1145, 0xf024, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
78281c53
ML
163 { 0, },
164};
165MODULE_DEVICE_TABLE(pci, delkin_cb_pci_tbl);
166
a9ab09e2 167static struct pci_driver delkin_cb_pci_driver = {
78281c53
ML
168 .name = "Delkin-ASKA-Workbit Cardbus IDE",
169 .id_table = delkin_cb_pci_tbl,
170 .probe = delkin_cb_probe,
171 .remove = delkin_cb_remove,
8c061a40
BZ
172 .suspend = delkin_cb_suspend,
173 .resume = delkin_cb_resume,
78281c53
ML
174};
175
f4084a1d 176static int __init delkin_cb_init(void)
78281c53 177{
a9ab09e2 178 return pci_register_driver(&delkin_cb_pci_driver);
78281c53
ML
179}
180
f4084a1d 181static void __exit delkin_cb_exit(void)
78281c53 182{
a9ab09e2 183 pci_unregister_driver(&delkin_cb_pci_driver);
78281c53
ML
184}
185
186module_init(delkin_cb_init);
187module_exit(delkin_cb_exit);
188
189MODULE_AUTHOR("Mark Lord");
190MODULE_DESCRIPTION("Basic support for Delkin/ASKA/Workbit Cardbus IDE");
191MODULE_LICENSE("GPL");
192