md/bitmap: disable bitmap_resize for file-backed bitmaps.
[GitHub/mt8127/android_kernel_alcatel_ttab.git] / drivers / gpio / gpio-max732x.c
CommitLineData
bbcd6d54 1/*
c103de24 2 * MAX732x I2C Port Expander with 8/16 I/O
bbcd6d54
EM
3 *
4 * Copyright (C) 2007 Marvell International Ltd.
5 * Copyright (C) 2008 Jack Ren <jack.ren@marvell.com>
6 * Copyright (C) 2008 Eric Miao <eric.miao@marvell.com>
7 *
8 * Derived from drivers/gpio/pca953x.c
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; version 2 of the License.
13 */
14
15#include <linux/module.h>
16#include <linux/init.h>
17#include <linux/slab.h>
18#include <linux/string.h>
19#include <linux/gpio.h>
a80a0bbe
MZ
20#include <linux/interrupt.h>
21#include <linux/irq.h>
bbcd6d54
EM
22#include <linux/i2c.h>
23#include <linux/i2c/max732x.h>
24
25
26/*
27 * Each port of MAX732x (including MAX7319) falls into one of the
28 * following three types:
29 *
30 * - Push Pull Output
31 * - Input
32 * - Open Drain I/O
33 *
34 * designated by 'O', 'I' and 'P' individually according to MAXIM's
a80a0bbe
MZ
35 * datasheets. 'I' and 'P' ports are interrupt capables, some with
36 * a dedicated interrupt mask.
bbcd6d54
EM
37 *
38 * There are two groups of I/O ports, each group usually includes
39 * up to 8 I/O ports, and is accessed by a specific I2C address:
40 *
41 * - Group A : by I2C address 0b'110xxxx
42 * - Group B : by I2C address 0b'101xxxx
43 *
44 * where 'xxxx' is decided by the connections of pin AD2/AD0. The
45 * address used also affects the initial state of output signals.
46 *
47 * Within each group of ports, there are five known combinations of
48 * I/O ports: 4I4O, 4P4O, 8I, 8P, 8O, see the definitions below for
a80a0bbe
MZ
49 * the detailed organization of these ports. Only Goup A is interrupt
50 * capable.
bbcd6d54
EM
51 *
52 * GPIO numbers start from 'gpio_base + 0' to 'gpio_base + 8/16',
53 * and GPIOs from GROUP_A are numbered before those from GROUP_B
54 * (if there are two groups).
55 *
56 * NOTE: MAX7328/MAX7329 are drop-in replacements for PCF8574/a, so
57 * they are not supported by this driver.
58 */
59
60#define PORT_NONE 0x0 /* '/' No Port */
61#define PORT_OUTPUT 0x1 /* 'O' Push-Pull, Output Only */
62#define PORT_INPUT 0x2 /* 'I' Input Only */
63#define PORT_OPENDRAIN 0x3 /* 'P' Open-Drain, I/O */
64
65#define IO_4I4O 0x5AA5 /* O7 O6 I5 I4 I3 I2 O1 O0 */
66#define IO_4P4O 0x5FF5 /* O7 O6 P5 P4 P3 P2 O1 O0 */
67#define IO_8I 0xAAAA /* I7 I6 I5 I4 I3 I2 I1 I0 */
68#define IO_8P 0xFFFF /* P7 P6 P5 P4 P3 P2 P1 P0 */
69#define IO_8O 0x5555 /* O7 O6 O5 O4 O3 O2 O1 O0 */
70
71#define GROUP_A(x) ((x) & 0xffff) /* I2C Addr: 0b'110xxxx */
72#define GROUP_B(x) ((x) << 16) /* I2C Addr: 0b'101xxxx */
73
a80a0bbe
MZ
74#define INT_NONE 0x0 /* No interrupt capability */
75#define INT_NO_MASK 0x1 /* Has interrupts, no mask */
76#define INT_INDEP_MASK 0x2 /* Has interrupts, independent mask */
77#define INT_MERGED_MASK 0x3 /* Has interrupts, merged mask */
78
79#define INT_CAPS(x) (((uint64_t)(x)) << 32)
80
81enum {
82 MAX7319,
83 MAX7320,
84 MAX7321,
85 MAX7322,
86 MAX7323,
87 MAX7324,
88 MAX7325,
89 MAX7326,
90 MAX7327,
91};
92
93static uint64_t max732x_features[] = {
94 [MAX7319] = GROUP_A(IO_8I) | INT_CAPS(INT_MERGED_MASK),
95 [MAX7320] = GROUP_B(IO_8O),
96 [MAX7321] = GROUP_A(IO_8P) | INT_CAPS(INT_NO_MASK),
97 [MAX7322] = GROUP_A(IO_4I4O) | INT_CAPS(INT_MERGED_MASK),
98 [MAX7323] = GROUP_A(IO_4P4O) | INT_CAPS(INT_INDEP_MASK),
99 [MAX7324] = GROUP_A(IO_8I) | GROUP_B(IO_8O) | INT_CAPS(INT_MERGED_MASK),
100 [MAX7325] = GROUP_A(IO_8P) | GROUP_B(IO_8O) | INT_CAPS(INT_NO_MASK),
101 [MAX7326] = GROUP_A(IO_4I4O) | GROUP_B(IO_8O) | INT_CAPS(INT_MERGED_MASK),
102 [MAX7327] = GROUP_A(IO_4P4O) | GROUP_B(IO_8O) | INT_CAPS(INT_NO_MASK),
103};
104
bbcd6d54 105static const struct i2c_device_id max732x_id[] = {
a80a0bbe
MZ
106 { "max7319", MAX7319 },
107 { "max7320", MAX7320 },
108 { "max7321", MAX7321 },
109 { "max7322", MAX7322 },
110 { "max7323", MAX7323 },
111 { "max7324", MAX7324 },
112 { "max7325", MAX7325 },
113 { "max7326", MAX7326 },
114 { "max7327", MAX7327 },
bbcd6d54
EM
115 { },
116};
117MODULE_DEVICE_TABLE(i2c, max732x_id);
118
119struct max732x_chip {
120 struct gpio_chip gpio_chip;
121
122 struct i2c_client *client; /* "main" client */
123 struct i2c_client *client_dummy;
124 struct i2c_client *client_group_a;
125 struct i2c_client *client_group_b;
126
127 unsigned int mask_group_a;
128 unsigned int dir_input;
129 unsigned int dir_output;
130
131 struct mutex lock;
132 uint8_t reg_out[2];
a80a0bbe
MZ
133
134#ifdef CONFIG_GPIO_MAX732X_IRQ
135 struct mutex irq_lock;
136 int irq_base;
137 uint8_t irq_mask;
138 uint8_t irq_mask_cur;
139 uint8_t irq_trig_raise;
140 uint8_t irq_trig_fall;
141 uint8_t irq_features;
142#endif
bbcd6d54
EM
143};
144
a80a0bbe 145static int max732x_writeb(struct max732x_chip *chip, int group_a, uint8_t val)
bbcd6d54
EM
146{
147 struct i2c_client *client;
148 int ret;
149
150 client = group_a ? chip->client_group_a : chip->client_group_b;
151 ret = i2c_smbus_write_byte(client, val);
152 if (ret < 0) {
153 dev_err(&client->dev, "failed writing\n");
154 return ret;
155 }
156
157 return 0;
158}
159
a80a0bbe 160static int max732x_readb(struct max732x_chip *chip, int group_a, uint8_t *val)
bbcd6d54
EM
161{
162 struct i2c_client *client;
163 int ret;
164
165 client = group_a ? chip->client_group_a : chip->client_group_b;
166 ret = i2c_smbus_read_byte(client);
167 if (ret < 0) {
168 dev_err(&client->dev, "failed reading\n");
169 return ret;
170 }
171
172 *val = (uint8_t)ret;
173 return 0;
174}
175
176static inline int is_group_a(struct max732x_chip *chip, unsigned off)
177{
178 return (1u << off) & chip->mask_group_a;
179}
180
181static int max732x_gpio_get_value(struct gpio_chip *gc, unsigned off)
182{
183 struct max732x_chip *chip;
184 uint8_t reg_val;
185 int ret;
186
187 chip = container_of(gc, struct max732x_chip, gpio_chip);
188
a80a0bbe 189 ret = max732x_readb(chip, is_group_a(chip, off), &reg_val);
bbcd6d54
EM
190 if (ret < 0)
191 return 0;
192
193 return reg_val & (1u << (off & 0x7));
194}
195
196static void max732x_gpio_set_value(struct gpio_chip *gc, unsigned off, int val)
197{
198 struct max732x_chip *chip;
199 uint8_t reg_out, mask = 1u << (off & 0x7);
200 int ret;
201
202 chip = container_of(gc, struct max732x_chip, gpio_chip);
203
204 mutex_lock(&chip->lock);
205
206 reg_out = (off > 7) ? chip->reg_out[1] : chip->reg_out[0];
207 reg_out = (val) ? reg_out | mask : reg_out & ~mask;
208
a80a0bbe 209 ret = max732x_writeb(chip, is_group_a(chip, off), reg_out);
bbcd6d54
EM
210 if (ret < 0)
211 goto out;
212
213 /* update the shadow register then */
214 if (off > 7)
215 chip->reg_out[1] = reg_out;
216 else
217 chip->reg_out[0] = reg_out;
218out:
219 mutex_unlock(&chip->lock);
220}
221
222static int max732x_gpio_direction_input(struct gpio_chip *gc, unsigned off)
223{
224 struct max732x_chip *chip;
225 unsigned int mask = 1u << off;
226
227 chip = container_of(gc, struct max732x_chip, gpio_chip);
228
229 if ((mask & chip->dir_input) == 0) {
230 dev_dbg(&chip->client->dev, "%s port %d is output only\n",
231 chip->client->name, off);
232 return -EACCES;
233 }
234
a13c1868
MZ
235 /*
236 * Open-drain pins must be set to high impedance (which is
237 * equivalent to output-high) to be turned into an input.
238 */
239 if ((mask & chip->dir_output))
240 max732x_gpio_set_value(gc, off, 1);
241
bbcd6d54
EM
242 return 0;
243}
244
245static int max732x_gpio_direction_output(struct gpio_chip *gc,
246 unsigned off, int val)
247{
248 struct max732x_chip *chip;
249 unsigned int mask = 1u << off;
250
251 chip = container_of(gc, struct max732x_chip, gpio_chip);
252
253 if ((mask & chip->dir_output) == 0) {
254 dev_dbg(&chip->client->dev, "%s port %d is input only\n",
255 chip->client->name, off);
256 return -EACCES;
257 }
258
259 max732x_gpio_set_value(gc, off, val);
260 return 0;
261}
262
a80a0bbe
MZ
263#ifdef CONFIG_GPIO_MAX732X_IRQ
264static int max732x_writew(struct max732x_chip *chip, uint16_t val)
265{
266 int ret;
267
268 val = cpu_to_le16(val);
269
270 ret = i2c_master_send(chip->client_group_a, (char *)&val, 2);
271 if (ret < 0) {
272 dev_err(&chip->client_group_a->dev, "failed writing\n");
273 return ret;
274 }
275
276 return 0;
277}
278
279static int max732x_readw(struct max732x_chip *chip, uint16_t *val)
280{
281 int ret;
282
283 ret = i2c_master_recv(chip->client_group_a, (char *)val, 2);
284 if (ret < 0) {
285 dev_err(&chip->client_group_a->dev, "failed reading\n");
286 return ret;
287 }
288
289 *val = le16_to_cpu(*val);
290 return 0;
291}
292
293static void max732x_irq_update_mask(struct max732x_chip *chip)
294{
295 uint16_t msg;
296
297 if (chip->irq_mask == chip->irq_mask_cur)
298 return;
299
300 chip->irq_mask = chip->irq_mask_cur;
301
302 if (chip->irq_features == INT_NO_MASK)
303 return;
304
305 mutex_lock(&chip->lock);
306
307 switch (chip->irq_features) {
308 case INT_INDEP_MASK:
309 msg = (chip->irq_mask << 8) | chip->reg_out[0];
310 max732x_writew(chip, msg);
311 break;
312
313 case INT_MERGED_MASK:
314 msg = chip->irq_mask | chip->reg_out[0];
315 max732x_writeb(chip, 1, (uint8_t)msg);
316 break;
317 }
318
319 mutex_unlock(&chip->lock);
320}
321
322static int max732x_gpio_to_irq(struct gpio_chip *gc, unsigned off)
323{
324 struct max732x_chip *chip;
325
326 chip = container_of(gc, struct max732x_chip, gpio_chip);
327 return chip->irq_base + off;
328}
329
fbc4667a 330static void max732x_irq_mask(struct irq_data *d)
a80a0bbe 331{
fbc4667a 332 struct max732x_chip *chip = irq_data_get_irq_chip_data(d);
a80a0bbe 333
fbc4667a 334 chip->irq_mask_cur &= ~(1 << (d->irq - chip->irq_base));
a80a0bbe
MZ
335}
336
fbc4667a 337static void max732x_irq_unmask(struct irq_data *d)
a80a0bbe 338{
fbc4667a 339 struct max732x_chip *chip = irq_data_get_irq_chip_data(d);
a80a0bbe 340
fbc4667a 341 chip->irq_mask_cur |= 1 << (d->irq - chip->irq_base);
a80a0bbe
MZ
342}
343
fbc4667a 344static void max732x_irq_bus_lock(struct irq_data *d)
a80a0bbe 345{
fbc4667a 346 struct max732x_chip *chip = irq_data_get_irq_chip_data(d);
a80a0bbe
MZ
347
348 mutex_lock(&chip->irq_lock);
349 chip->irq_mask_cur = chip->irq_mask;
350}
351
fbc4667a 352static void max732x_irq_bus_sync_unlock(struct irq_data *d)
a80a0bbe 353{
fbc4667a 354 struct max732x_chip *chip = irq_data_get_irq_chip_data(d);
a80a0bbe
MZ
355
356 max732x_irq_update_mask(chip);
357 mutex_unlock(&chip->irq_lock);
358}
359
fbc4667a 360static int max732x_irq_set_type(struct irq_data *d, unsigned int type)
a80a0bbe 361{
fbc4667a
LB
362 struct max732x_chip *chip = irq_data_get_irq_chip_data(d);
363 uint16_t off = d->irq - chip->irq_base;
a80a0bbe
MZ
364 uint16_t mask = 1 << off;
365
366 if (!(mask & chip->dir_input)) {
367 dev_dbg(&chip->client->dev, "%s port %d is output only\n",
368 chip->client->name, off);
369 return -EACCES;
370 }
371
372 if (!(type & IRQ_TYPE_EDGE_BOTH)) {
373 dev_err(&chip->client->dev, "irq %d: unsupported type %d\n",
fbc4667a 374 d->irq, type);
a80a0bbe
MZ
375 return -EINVAL;
376 }
377
378 if (type & IRQ_TYPE_EDGE_FALLING)
379 chip->irq_trig_fall |= mask;
380 else
381 chip->irq_trig_fall &= ~mask;
382
383 if (type & IRQ_TYPE_EDGE_RISING)
384 chip->irq_trig_raise |= mask;
385 else
386 chip->irq_trig_raise &= ~mask;
387
388 return max732x_gpio_direction_input(&chip->gpio_chip, off);
389}
390
391static struct irq_chip max732x_irq_chip = {
392 .name = "max732x",
fbc4667a
LB
393 .irq_mask = max732x_irq_mask,
394 .irq_unmask = max732x_irq_unmask,
395 .irq_bus_lock = max732x_irq_bus_lock,
396 .irq_bus_sync_unlock = max732x_irq_bus_sync_unlock,
397 .irq_set_type = max732x_irq_set_type,
a80a0bbe
MZ
398};
399
400static uint8_t max732x_irq_pending(struct max732x_chip *chip)
401{
402 uint8_t cur_stat;
403 uint8_t old_stat;
404 uint8_t trigger;
405 uint8_t pending;
406 uint16_t status;
407 int ret;
408
409 ret = max732x_readw(chip, &status);
410 if (ret)
411 return 0;
412
413 trigger = status >> 8;
414 trigger &= chip->irq_mask;
415
416 if (!trigger)
417 return 0;
418
419 cur_stat = status & 0xFF;
420 cur_stat &= chip->irq_mask;
421
422 old_stat = cur_stat ^ trigger;
423
424 pending = (old_stat & chip->irq_trig_fall) |
425 (cur_stat & chip->irq_trig_raise);
426 pending &= trigger;
427
428 return pending;
429}
430
431static irqreturn_t max732x_irq_handler(int irq, void *devid)
432{
433 struct max732x_chip *chip = devid;
434 uint8_t pending;
435 uint8_t level;
436
437 pending = max732x_irq_pending(chip);
438
439 if (!pending)
440 return IRQ_HANDLED;
441
442 do {
443 level = __ffs(pending);
444 handle_nested_irq(level + chip->irq_base);
445
446 pending &= ~(1 << level);
447 } while (pending);
448
449 return IRQ_HANDLED;
450}
451
452static int max732x_irq_setup(struct max732x_chip *chip,
453 const struct i2c_device_id *id)
454{
455 struct i2c_client *client = chip->client;
456 struct max732x_platform_data *pdata = client->dev.platform_data;
457 int has_irq = max732x_features[id->driver_data] >> 32;
458 int ret;
459
460 if (pdata->irq_base && has_irq != INT_NONE) {
461 int lvl;
462
463 chip->irq_base = pdata->irq_base;
464 chip->irq_features = has_irq;
465 mutex_init(&chip->irq_lock);
466
467 for (lvl = 0; lvl < chip->gpio_chip.ngpio; lvl++) {
468 int irq = lvl + chip->irq_base;
469
470 if (!(chip->dir_input & (1 << lvl)))
471 continue;
472
b51804bc
TG
473 irq_set_chip_data(irq, chip);
474 irq_set_chip_and_handler(irq, &max732x_irq_chip,
a80a0bbe 475 handle_edge_irq);
b51804bc 476 irq_set_nested_thread(irq, 1);
a80a0bbe
MZ
477#ifdef CONFIG_ARM
478 set_irq_flags(irq, IRQF_VALID);
479#else
b51804bc 480 irq_set_noprobe(irq);
a80a0bbe
MZ
481#endif
482 }
483
484 ret = request_threaded_irq(client->irq,
485 NULL,
486 max732x_irq_handler,
487 IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
488 dev_name(&client->dev), chip);
489 if (ret) {
490 dev_err(&client->dev, "failed to request irq %d\n",
491 client->irq);
492 goto out_failed;
493 }
494
495 chip->gpio_chip.to_irq = max732x_gpio_to_irq;
496 }
497
498 return 0;
499
500out_failed:
501 chip->irq_base = 0;
502 return ret;
503}
504
505static void max732x_irq_teardown(struct max732x_chip *chip)
506{
507 if (chip->irq_base)
508 free_irq(chip->client->irq, chip);
509}
510#else /* CONFIG_GPIO_MAX732X_IRQ */
511static int max732x_irq_setup(struct max732x_chip *chip,
512 const struct i2c_device_id *id)
513{
514 struct i2c_client *client = chip->client;
515 struct max732x_platform_data *pdata = client->dev.platform_data;
516 int has_irq = max732x_features[id->driver_data] >> 32;
517
518 if (pdata->irq_base && has_irq != INT_NONE)
519 dev_warn(&client->dev, "interrupt support not compiled in\n");
520
521 return 0;
522}
523
524static void max732x_irq_teardown(struct max732x_chip *chip)
525{
526}
527#endif
528
3836309d 529static int max732x_setup_gpio(struct max732x_chip *chip,
bbcd6d54
EM
530 const struct i2c_device_id *id,
531 unsigned gpio_start)
532{
533 struct gpio_chip *gc = &chip->gpio_chip;
a80a0bbe 534 uint32_t id_data = (uint32_t)max732x_features[id->driver_data];
bbcd6d54
EM
535 int i, port = 0;
536
537 for (i = 0; i < 16; i++, id_data >>= 2) {
538 unsigned int mask = 1 << port;
539
540 switch (id_data & 0x3) {
541 case PORT_OUTPUT:
542 chip->dir_output |= mask;
543 break;
544 case PORT_INPUT:
545 chip->dir_input |= mask;
546 break;
547 case PORT_OPENDRAIN:
548 chip->dir_output |= mask;
549 chip->dir_input |= mask;
550 break;
551 default:
552 continue;
553 }
554
555 if (i < 8)
556 chip->mask_group_a |= mask;
557 port++;
558 }
559
560 if (chip->dir_input)
561 gc->direction_input = max732x_gpio_direction_input;
562 if (chip->dir_output) {
563 gc->direction_output = max732x_gpio_direction_output;
564 gc->set = max732x_gpio_set_value;
565 }
566 gc->get = max732x_gpio_get_value;
567 gc->can_sleep = 1;
568
569 gc->base = gpio_start;
570 gc->ngpio = port;
571 gc->label = chip->client->name;
572 gc->owner = THIS_MODULE;
573
574 return port;
575}
576
3836309d 577static int max732x_probe(struct i2c_client *client,
bbcd6d54
EM
578 const struct i2c_device_id *id)
579{
580 struct max732x_platform_data *pdata;
581 struct max732x_chip *chip;
582 struct i2c_client *c;
583 uint16_t addr_a, addr_b;
584 int ret, nr_port;
585
586 pdata = client->dev.platform_data;
a342d215
BD
587 if (pdata == NULL) {
588 dev_dbg(&client->dev, "no platform data\n");
589 return -EINVAL;
590 }
bbcd6d54 591
b09638a4
JH
592 chip = devm_kzalloc(&client->dev, sizeof(struct max732x_chip),
593 GFP_KERNEL);
bbcd6d54
EM
594 if (chip == NULL)
595 return -ENOMEM;
596 chip->client = client;
597
598 nr_port = max732x_setup_gpio(chip, id, pdata->gpio_base);
599
600 addr_a = (client->addr & 0x0f) | 0x60;
601 addr_b = (client->addr & 0x0f) | 0x50;
602
603 switch (client->addr & 0x70) {
604 case 0x60:
605 chip->client_group_a = client;
5535cb68 606 if (nr_port > 8) {
bbcd6d54
EM
607 c = i2c_new_dummy(client->adapter, addr_b);
608 chip->client_group_b = chip->client_dummy = c;
609 }
610 break;
611 case 0x50:
612 chip->client_group_b = client;
5535cb68 613 if (nr_port > 8) {
bbcd6d54
EM
614 c = i2c_new_dummy(client->adapter, addr_a);
615 chip->client_group_a = chip->client_dummy = c;
616 }
617 break;
618 default:
619 dev_err(&client->dev, "invalid I2C address specified %02x\n",
620 client->addr);
621 ret = -EINVAL;
622 goto out_failed;
623 }
624
625 mutex_init(&chip->lock);
626
a80a0bbe 627 max732x_readb(chip, is_group_a(chip, 0), &chip->reg_out[0]);
5535cb68 628 if (nr_port > 8)
a80a0bbe
MZ
629 max732x_readb(chip, is_group_a(chip, 8), &chip->reg_out[1]);
630
631 ret = max732x_irq_setup(chip, id);
632 if (ret)
633 goto out_failed;
bbcd6d54
EM
634
635 ret = gpiochip_add(&chip->gpio_chip);
636 if (ret)
637 goto out_failed;
638
639 if (pdata->setup) {
640 ret = pdata->setup(client, chip->gpio_chip.base,
641 chip->gpio_chip.ngpio, pdata->context);
642 if (ret < 0)
643 dev_warn(&client->dev, "setup failed, %d\n", ret);
644 }
645
646 i2c_set_clientdata(client, chip);
647 return 0;
648
649out_failed:
a80a0bbe 650 max732x_irq_teardown(chip);
bbcd6d54
EM
651 return ret;
652}
653
206210ce 654static int max732x_remove(struct i2c_client *client)
bbcd6d54
EM
655{
656 struct max732x_platform_data *pdata = client->dev.platform_data;
657 struct max732x_chip *chip = i2c_get_clientdata(client);
658 int ret;
659
660 if (pdata->teardown) {
661 ret = pdata->teardown(client, chip->gpio_chip.base,
662 chip->gpio_chip.ngpio, pdata->context);
663 if (ret < 0) {
664 dev_err(&client->dev, "%s failed, %d\n",
665 "teardown", ret);
666 return ret;
667 }
668 }
669
670 ret = gpiochip_remove(&chip->gpio_chip);
671 if (ret) {
672 dev_err(&client->dev, "%s failed, %d\n",
673 "gpiochip_remove()", ret);
674 return ret;
675 }
676
a80a0bbe
MZ
677 max732x_irq_teardown(chip);
678
bbcd6d54
EM
679 /* unregister any dummy i2c_client */
680 if (chip->client_dummy)
681 i2c_unregister_device(chip->client_dummy);
682
bbcd6d54
EM
683 return 0;
684}
685
686static struct i2c_driver max732x_driver = {
687 .driver = {
688 .name = "max732x",
689 .owner = THIS_MODULE,
690 },
691 .probe = max732x_probe,
8283c4ff 692 .remove = max732x_remove,
bbcd6d54
EM
693 .id_table = max732x_id,
694};
695
696static int __init max732x_init(void)
697{
698 return i2c_add_driver(&max732x_driver);
699}
2f8d1197
DB
700/* register after i2c postcore initcall and before
701 * subsys initcalls that may rely on these GPIOs
702 */
703subsys_initcall(max732x_init);
bbcd6d54
EM
704
705static void __exit max732x_exit(void)
706{
707 i2c_del_driver(&max732x_driver);
708}
709module_exit(max732x_exit);
710
711MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>");
712MODULE_DESCRIPTION("GPIO expander driver for MAX732X");
713MODULE_LICENSE("GPL");