[GitHub/mt8127/android_kernel_alcatel_ttab.git] / drivers / bluetooth / Kconfig


menu "Bluetooth device drivers"
	depends on BT

config BT_HCIBTUSB
	tristate "HCI USB driver"
	depends on USB
	help
	  Bluetooth HCI USB driver.
	  This driver is required if you want to use Bluetooth devices with
	  USB interface.

	  Say Y here to compile support for Bluetooth USB devices into the
	  kernel or say M to compile it as module (btusb).

config BT_HCIBTSDIO
	tristate "HCI SDIO driver"
	depends on MMC
	help
	  Bluetooth HCI SDIO driver.
	  This driver is required if you want to use Bluetooth device with
	  SDIO interface.

	  Say Y here to compile support for Bluetooth SDIO devices into the
	  kernel or say M to compile it as module (btsdio).

config BT_HCIUART
	tristate "HCI UART driver"
	depends on TTY
	help
	  Bluetooth HCI UART driver.
	  This driver is required if you want to use Bluetooth devices with
	  serial port interface. You will also need this driver if you have 
	  UART based Bluetooth PCMCIA and CF devices like Xircom Credit Card 
	  adapter and BrainBoxes Bluetooth PC Card.

	  Say Y here to compile support for Bluetooth UART devices into the
	  kernel or say M to compile it as module (hci_uart).

config BT_HCIUART_H4
	bool "UART (H4) protocol support"
	depends on BT_HCIUART
	help
	  UART (H4) is serial protocol for communication between Bluetooth 
	  device and host. This protocol is required for most Bluetooth devices 
	  with UART interface, including PCMCIA and CF cards. 

	  Say Y here to compile support for HCI UART (H4) protocol.

config BT_HCIUART_BCSP
	bool "BCSP protocol support"
	depends on BT_HCIUART
	select BITREVERSE
	help
	  BCSP (BlueCore Serial Protocol) is serial protocol for communication 
	  between Bluetooth device and host. This protocol is required for non
	  USB Bluetooth devices based on CSR BlueCore chip, including PCMCIA and
	  CF cards.

	  Say Y here to compile support for HCI BCSP protocol.

config BT_HCIUART_ATH3K
	bool "Atheros AR300x serial support"
	depends on BT_HCIUART
	help
	  HCIATH3K (HCI Atheros AR300x) is a serial protocol for
	  communication between host and Atheros AR300x Bluetooth devices.
	  This protocol enables AR300x chips to be enabled with
	  power management support.
	  Enable this if you have Atheros AR300x serial Bluetooth device.

	  Say Y here to compile support for HCI UART ATH3K protocol.

config BT_HCIUART_LL
	bool "HCILL protocol support"
	depends on BT_HCIUART
	help
	  HCILL (HCI Low Level) is a serial protocol for communication
	  between Bluetooth device and host. This protocol is required for
	  serial Bluetooth devices that are based on Texas Instruments'
	  BRF chips.

	  Say Y here to compile support for HCILL protocol.

config BT_HCIUART_3WIRE
	bool "Three-wire UART (H5) protocol support"
	depends on BT_HCIUART
	help
	  The HCI Three-wire UART Transport Layer makes it possible to
	  user the Bluetooth HCI over a serial port interface. The HCI
	  Three-wire UART Transport Layer assumes that the UART
	  communication may have bit errors, overrun errors or burst
	  errors and thereby making CTS/RTS lines unnecessary.

	  Say Y here to compile support for Three-wire UART protocol.

config BT_HCIBCM203X
	tristate "HCI BCM203x USB driver"
	depends on USB
	select FW_LOADER
	help
	  Bluetooth HCI BCM203x USB driver.
	  This driver provides the firmware loading mechanism for the Broadcom
	  Blutonium based devices.

	  Say Y here to compile support for HCI BCM203x devices into the
	  kernel or say M to compile it as module (bcm203x).

config BT_HCIBPA10X
	tristate "HCI BPA10x USB driver"
	depends on USB
	help
	  Bluetooth HCI BPA10x USB driver.
	  This driver provides support for the Digianswer BPA 100/105 Bluetooth
	  sniffer devices.

	  Say Y here to compile support for HCI BPA10x devices into the
	  kernel or say M to compile it as module (bpa10x).

config BT_HCIBFUSB
	tristate "HCI BlueFRITZ! USB driver"
	depends on USB
	select FW_LOADER
	help
	  Bluetooth HCI BlueFRITZ! USB driver.
	  This driver provides support for Bluetooth USB devices with AVM
	  interface:
	     AVM BlueFRITZ! USB

	  Say Y here to compile support for HCI BFUSB devices into the
	  kernel or say M to compile it as module (bfusb).

config BT_HCIDTL1
	tristate "HCI DTL1 (PC Card) driver"
	depends on PCMCIA
	help
	  Bluetooth HCI DTL1 (PC Card) driver.
	  This driver provides support for Bluetooth PCMCIA devices with
	  Nokia DTL1 interface:
	     Nokia Bluetooth Card
	     Socket Bluetooth CF Card

	  Say Y here to compile support for HCI DTL1 devices into the
	  kernel or say M to compile it as module (dtl1_cs).

config BT_HCIBT3C
	tristate "HCI BT3C (PC Card) driver"
	depends on PCMCIA
	select FW_LOADER
	help
	  Bluetooth HCI BT3C (PC Card) driver.
	  This driver provides support for Bluetooth PCMCIA devices with
	  3Com BT3C interface:
	     3Com Bluetooth Card (3CRWB6096)
	     HP Bluetooth Card

	  Say Y here to compile support for HCI BT3C devices into the
	  kernel or say M to compile it as module (bt3c_cs).

config BT_HCIBLUECARD
	tristate "HCI BlueCard (PC Card) driver"
	depends on PCMCIA
	help
	  Bluetooth HCI BlueCard (PC Card) driver.
	  This driver provides support for Bluetooth PCMCIA devices with
	  Anycom BlueCard interface:
	     Anycom Bluetooth PC Card
	     Anycom Bluetooth CF Card

	  Say Y here to compile support for HCI BlueCard devices into the
	  kernel or say M to compile it as module (bluecard_cs).

config BT_HCIBTUART
	tristate "HCI UART (PC Card) device driver"
	depends on PCMCIA
	help
	  Bluetooth HCI UART (PC Card) driver.
	  This driver provides support for Bluetooth PCMCIA devices with
	  an UART interface:
	     Xircom CreditCard Bluetooth Adapter
	     Xircom RealPort2 Bluetooth Adapter
	     Sphinx PICO Card
	     H-Soft blue+Card
	     Cyber-blue Compact Flash Card

	  Say Y here to compile support for HCI UART devices into the
	  kernel or say M to compile it as module (btuart_cs).

config BT_HCIVHCI
	tristate "HCI VHCI (Virtual HCI device) driver"
	help
	  Bluetooth Virtual HCI device driver.
	  This driver is required if you want to use HCI Emulation software.

	  Say Y here to compile support for virtual HCI devices into the
	  kernel or say M to compile it as module (hci_vhci).

config BT_MRVL
	tristate "Marvell Bluetooth driver support"
	help
	  The core driver to support Marvell Bluetooth devices.

	  This driver is required if you want to support
	  Marvell Bluetooth devices, such as 8688/8787/8797/8897.

	  Say Y here to compile Marvell Bluetooth driver
	  into the kernel or say M to compile it as module.

config BT_MRVL_SDIO
	tristate "Marvell BT-over-SDIO driver"
	depends on BT_MRVL && MMC
	select FW_LOADER
	help
	  The driver for Marvell Bluetooth chipsets with SDIO interface.

	  This driver is required if you want to use Marvell Bluetooth
	  devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8897
	  chipsets are supported.

	  Say Y here to compile support for Marvell BT-over-SDIO driver
	  into the kernel or say M to compile it as module.

config BT_ATH3K
	tristate "Atheros firmware download driver"
	depends on BT_HCIBTUSB
	select FW_LOADER
	help
	  Bluetooth firmware download driver.
	  This driver loads the firmware into the Atheros Bluetooth
	  chipset.

	  Say Y here to compile support for "Atheros firmware download driver"
	  into the kernel or say M to compile it as module (ath3k).

config BT_WILINK
	tristate "Texas Instruments WiLink7 driver"
	depends on TI_ST
	help
	  This enables the Bluetooth driver for Texas Instrument's BT/FM/GPS
	  combo devices. This makes use of shared transport line discipline
	  core driver to communicate with the BT core of the combo chip.

	  Say Y here to compile support for Texas Instrument's WiLink7 driver
	  into the kernel or say M to compile it as module.
endmenu
Commit	Line	Data
1da177e4 LT	1
	2	menu "Bluetooth device drivers"
	3	depends on BT
	4
5e23b923	5	config BT_HCIBTUSB
9bfa35fe MH	6	tristate "HCI USB driver"
9bfa35fe MH	7	depends on USB
5e23b923 MH	8	help
	9	Bluetooth HCI USB driver.
	10	This driver is required if you want to use Bluetooth devices with
	11	USB interface.
	12
5e23b923 MH	13	Say Y here to compile support for Bluetooth USB devices into the
	14	kernel or say M to compile it as module (btusb).
	15
ddbaf13e MH	16	config BT_HCIBTSDIO
	17	tristate "HCI SDIO driver"
	18	depends on MMC
	19	help
	20	Bluetooth HCI SDIO driver.
	21	This driver is required if you want to use Bluetooth device with
	22	SDIO interface.
	23
	24	Say Y here to compile support for Bluetooth SDIO devices into the
	25	kernel or say M to compile it as module (btsdio).
	26
1da177e4 LT	27	config BT_HCIUART
1da177e4 LT	28	tristate "HCI UART driver"
4f73bc4d	29	depends on TTY
1da177e4 LT	30	help
	31	Bluetooth HCI UART driver.
	32	This driver is required if you want to use Bluetooth devices with
	33	serial port interface. You will also need this driver if you have
	34	UART based Bluetooth PCMCIA and CF devices like Xircom Credit Card
	35	adapter and BrainBoxes Bluetooth PC Card.
	36
	37	Say Y here to compile support for Bluetooth UART devices into the
	38	kernel or say M to compile it as module (hci_uart).
	39
	40	config BT_HCIUART_H4
	41	bool "UART (H4) protocol support"
	42	depends on BT_HCIUART
	43	help
	44	UART (H4) is serial protocol for communication between Bluetooth
	45	device and host. This protocol is required for most Bluetooth devices
	46	with UART interface, including PCMCIA and CF cards.
	47
	48	Say Y here to compile support for HCI UART (H4) protocol.
	49
	50	config BT_HCIUART_BCSP
	51	bool "BCSP protocol support"
	52	depends on BT_HCIUART
d3a8eab0	53	select BITREVERSE
1da177e4 LT	54	help
	55	BCSP (BlueCore Serial Protocol) is serial protocol for communication
	56	between Bluetooth device and host. This protocol is required for non
	57	USB Bluetooth devices based on CSR BlueCore chip, including PCMCIA and
	58	CF cards.
	59
	60	Say Y here to compile support for HCI BCSP protocol.
	61
b3190df6 SS	62	config BT_HCIUART_ATH3K
	63	bool "Atheros AR300x serial support"
	64	depends on BT_HCIUART
	65	help
	66	HCIATH3K (HCI Atheros AR300x) is a serial protocol for
	67	communication between host and Atheros AR300x Bluetooth devices.
	68	This protocol enables AR300x chips to be enabled with
	69	power management support.
	70	Enable this if you have Atheros AR300x serial Bluetooth device.
	71
	72	Say Y here to compile support for HCI UART ATH3K protocol.
	73
166d2f6a OBC	74	config BT_HCIUART_LL
	75	bool "HCILL protocol support"
	76	depends on BT_HCIUART
	77	help
	78	HCILL (HCI Low Level) is a serial protocol for communication
	79	between Bluetooth device and host. This protocol is required for
	80	serial Bluetooth devices that are based on Texas Instruments'
	81	BRF chips.
	82
	83	Say Y here to compile support for HCILL protocol.
	84
7dec65c8 JH	85	config BT_HCIUART_3WIRE
	86	bool "Three-wire UART (H5) protocol support"
	87	depends on BT_HCIUART
	88	help
	89	The HCI Three-wire UART Transport Layer makes it possible to
	90	user the Bluetooth HCI over a serial port interface. The HCI
	91	Three-wire UART Transport Layer assumes that the UART
	92	communication may have bit errors, overrun errors or burst
	93	errors and thereby making CTS/RTS lines unnecessary.
	94
	95	Say Y here to compile support for Three-wire UART protocol.
	96
1da177e4 LT	97	config BT_HCIBCM203X
	98	tristate "HCI BCM203x USB driver"
	99	depends on USB
	100	select FW_LOADER
	101	help
	102	Bluetooth HCI BCM203x USB driver.
	103	This driver provides the firmware loading mechanism for the Broadcom
	104	Blutonium based devices.
	105
	106	Say Y here to compile support for HCI BCM203x devices into the
	107	kernel or say M to compile it as module (bcm203x).
	108
	109	config BT_HCIBPA10X
	110	tristate "HCI BPA10x USB driver"
	111	depends on USB
	112	help
	113	Bluetooth HCI BPA10x USB driver.
	114	This driver provides support for the Digianswer BPA 100/105 Bluetooth
	115	sniffer devices.
	116
	117	Say Y here to compile support for HCI BPA10x devices into the
	118	kernel or say M to compile it as module (bpa10x).
	119
	120	config BT_HCIBFUSB
	121	tristate "HCI BlueFRITZ! USB driver"
	122	depends on USB
	123	select FW_LOADER
	124	help
	125	Bluetooth HCI BlueFRITZ! USB driver.
	126	This driver provides support for Bluetooth USB devices with AVM
	127	interface:
	128	AVM BlueFRITZ! USB
	129
	130	Say Y here to compile support for HCI BFUSB devices into the
	131	kernel or say M to compile it as module (bfusb).
	132
	133	config BT_HCIDTL1
	134	tristate "HCI DTL1 (PC Card) driver"
	135	depends on PCMCIA
	136	help
	137	Bluetooth HCI DTL1 (PC Card) driver.
	138	This driver provides support for Bluetooth PCMCIA devices with
	139	Nokia DTL1 interface:
	140	Nokia Bluetooth Card
	141	Socket Bluetooth CF Card
	142
	143	Say Y here to compile support for HCI DTL1 devices into the
	144	kernel or say M to compile it as module (dtl1_cs).
	145
	146	config BT_HCIBT3C
	147	tristate "HCI BT3C (PC Card) driver"
	148	depends on PCMCIA
	149	select FW_LOADER
	150	help
	151	Bluetooth HCI BT3C (PC Card) driver.
	152	This driver provides support for Bluetooth PCMCIA devices with
	153	3Com BT3C interface:
	154	3Com Bluetooth Card (3CRWB6096)
	155	HP Bluetooth Card
	156
	157	Say Y here to compile support for HCI BT3C devices into the
	158	kernel or say M to compile it as module (bt3c_cs).
	159
	160	config BT_HCIBLUECARD
161	tristate "HCI BlueCard (PC Card) driver"
162	depends on PCMCIA
163	help
164	Bluetooth HCI BlueCard (PC Card) driver.
165	This driver provides support for Bluetooth PCMCIA devices with
166	Anycom BlueCard interface:
167	Anycom Bluetooth PC Card
168	Anycom Bluetooth CF Card
169
170	Say Y here to compile support for HCI BlueCard devices into the
171	kernel or say M to compile it as module (bluecard_cs).
172
173	config BT_HCIBTUART
174	tristate "HCI UART (PC Card) device driver"
175	depends on PCMCIA
176	help
177	Bluetooth HCI UART (PC Card) driver.
178	This driver provides support for Bluetooth PCMCIA devices with
179	an UART interface:
180	Xircom CreditCard Bluetooth Adapter
181	Xircom RealPort2 Bluetooth Adapter
182	Sphinx PICO Card
183	H-Soft blue+Card
184	Cyber-blue Compact Flash Card
185
186	Say Y here to compile support for HCI UART devices into the
187	kernel or say M to compile it as module (btuart_cs).
188
189	config BT_HCIVHCI
190	tristate "HCI VHCI (Virtual HCI device) driver"
191	help
192	Bluetooth Virtual HCI device driver.
193	This driver is required if you want to use HCI Emulation software.
194
195	Say Y here to compile support for virtual HCI devices into the
196	kernel or say M to compile it as module (hci_vhci).
197
132ff4e5 BZ	198	config BT_MRVL
132ff4e5 BZ	199	tristate "Marvell Bluetooth driver support"
132ff4e5 BZ	200	help
	201	The core driver to support Marvell Bluetooth devices.
	202
	203	This driver is required if you want to support
22f2efed	204	Marvell Bluetooth devices, such as 8688/8787/8797/8897.
132ff4e5 BZ	205
	206	Say Y here to compile Marvell Bluetooth driver
	207	into the kernel or say M to compile it as module.
	208
789221ec BZ	209	config BT_MRVL_SDIO
	210	tristate "Marvell BT-over-SDIO driver"
	211	depends on BT_MRVL && MMC
e7a25f98	212	select FW_LOADER
789221ec BZ	213	help
	214	The driver for Marvell Bluetooth chipsets with SDIO interface.
	215
	216	This driver is required if you want to use Marvell Bluetooth
22f2efed	217	devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8897
2ac654f7	218	chipsets are supported.
789221ec BZ	219
	220	Say Y here to compile support for Marvell BT-over-SDIO driver
	221	into the kernel or say M to compile it as module.
	222
9670d80a VK	223	config BT_ATH3K
	224	tristate "Atheros firmware download driver"
	225	depends on BT_HCIBTUSB
	226	select FW_LOADER
	227	help
	228	Bluetooth firmware download driver.
	229	This driver loads the firmware into the Atheros Bluetooth
	230	chipset.
1da177e4	231
9670d80a VK	232	Say Y here to compile support for "Atheros firmware download driver"
	233	into the kernel or say M to compile it as module (ath3k).
	234
363907af PS	235	config BT_WILINK
	236	tristate "Texas Instruments WiLink7 driver"
	237	depends on TI_ST
	238	help
	239	This enables the Bluetooth driver for Texas Instrument's BT/FM/GPS
	240	combo devices. This makes use of shared transport line discipline
	241	core driver to communicate with the BT core of the combo chip.
	242
	243	Say Y here to compile support for Texas Instrument's WiLink7 driver
	244	into the kernel or say M to compile it as module.
9670d80a	245	endmenu