[GitHub/mt8127/android_kernel_alcatel_ttab.git] / drivers / atm / horizon.h

/*
  Madge Horizon ATM Adapter driver.
  Copyright (C) 1995-1999  Madge Networks Ltd.

  This program is free software; you can redistribute it and/or modify
  it under the terms of the GNU General Public License as published by
  the Free Software Foundation; either version 2 of the License, or
  (at your option) any later version.

  This program is distributed in the hope that it will be useful,
  but WITHOUT ANY WARRANTY; without even the implied warranty of
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  GNU General Public License for more details.

  You should have received a copy of the GNU General Public License
  along with this program; if not, write to the Free Software
  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA

  The GNU GPL is contained in /usr/doc/copyright/GPL on a Debian
  system and in the file COPYING in the Linux kernel source.
*/

/*
  IMPORTANT NOTE: Madge Networks no longer makes the adapters
  supported by this driver and makes no commitment to maintain it.
*/

/* too many macros - change to inline functions */

#ifndef DRIVER_ATM_HORIZON_H
#define DRIVER_ATM_HORIZON_H


#ifdef CONFIG_ATM_HORIZON_DEBUG
#define DEBUG_HORIZON
#endif

#define DEV_LABEL                         "hrz"

#ifndef PCI_VENDOR_ID_MADGE
#define PCI_VENDOR_ID_MADGE               0x10B6
#endif
#ifndef PCI_DEVICE_ID_MADGE_HORIZON
#define PCI_DEVICE_ID_MADGE_HORIZON       0x1000
#endif

// diagnostic output

#define PRINTK(severity,format,args...) \
  printk(severity DEV_LABEL ": " format "\n" , ## args)

#ifdef DEBUG_HORIZON

#define DBG_ERR  0x0001
#define DBG_WARN 0x0002
#define DBG_INFO 0x0004
#define DBG_VCC  0x0008
#define DBG_QOS  0x0010
#define DBG_TX   0x0020
#define DBG_RX   0x0040
#define DBG_SKB  0x0080
#define DBG_IRQ  0x0100
#define DBG_FLOW 0x0200
#define DBG_BUS  0x0400
#define DBG_REGS 0x0800
#define DBG_DATA 0x1000
#define DBG_MASK 0x1fff

/* the ## prevents the annoying double expansion of the macro arguments */
/* KERN_INFO is used since KERN_DEBUG often does not make it to the console */
#define PRINTDB(bits,format,args...) \
  ( (debug & (bits)) ? printk (KERN_INFO DEV_LABEL ": " format , ## args) : 1 )
#define PRINTDM(bits,format,args...) \
  ( (debug & (bits)) ? printk (format , ## args) : 1 )
#define PRINTDE(bits,format,args...) \
  ( (debug & (bits)) ? printk (format "\n" , ## args) : 1 )
#define PRINTD(bits,format,args...) \
  ( (debug & (bits)) ? printk (KERN_INFO DEV_LABEL ": " format "\n" , ## args) : 1 )

#else

#define PRINTD(bits,format,args...)
#define PRINTDB(bits,format,args...)
#define PRINTDM(bits,format,args...)
#define PRINTDE(bits,format,args...)

#endif

#define PRINTDD(sec,fmt,args...)
#define PRINTDDB(sec,fmt,args...)
#define PRINTDDM(sec,fmt,args...)
#define PRINTDDE(sec,fmt,args...)

// fixed constants

#define SPARE_BUFFER_POOL_SIZE            MAX_VCS
#define HRZ_MAX_VPI                       4
#define MIN_PCI_LATENCY                   48 // 24 IS TOO SMALL

/*  Horizon specific bits */
/*  Register offsets */

#define HRZ_IO_EXTENT                     0x80

#define DATA_PORT_OFF                     0x00
#define TX_CHANNEL_PORT_OFF               0x04
#define TX_DESCRIPTOR_PORT_OFF            0x08
#define MEMORY_PORT_OFF                   0x0C
#define MEM_WR_ADDR_REG_OFF               0x14
#define MEM_RD_ADDR_REG_OFF               0x18
#define CONTROL_0_REG                     0x1C
#define INT_SOURCE_REG_OFF                0x20
#define INT_ENABLE_REG_OFF                0x24
#define MASTER_RX_ADDR_REG_OFF            0x28
#define MASTER_RX_COUNT_REG_OFF           0x2C
#define MASTER_TX_ADDR_REG_OFF            0x30
#define MASTER_TX_COUNT_REG_OFF           0x34
#define TX_DESCRIPTOR_REG_OFF             0x38
#define TX_CHANNEL_CONFIG_COMMAND_OFF     0x40
#define TX_CHANNEL_CONFIG_DATA_OFF        0x44
#define TX_FREE_BUFFER_COUNT_OFF          0x48
#define RX_FREE_BUFFER_COUNT_OFF          0x4C
#define TX_CONFIG_OFF                     0x50
#define TX_STATUS_OFF                     0x54
#define RX_CONFIG_OFF                     0x58
#define RX_LINE_CONFIG_OFF                0x5C
#define RX_QUEUE_RD_PTR_OFF               0x60
#define RX_QUEUE_WR_PTR_OFF               0x64
#define MAX_AAL5_CELL_COUNT_OFF           0x68
#define RX_CHANNEL_PORT_OFF               0x6C
#define TX_CELL_COUNT_OFF                 0x70
#define RX_CELL_COUNT_OFF                 0x74
#define HEC_ERROR_COUNT_OFF               0x78
#define UNASSIGNED_CELL_COUNT_OFF         0x7C

/*  Register bit definitions */

/* Control 0 register */

#define SEEPROM_DO                        0x00000001
#define SEEPROM_DI                        0x00000002
#define SEEPROM_SK                        0x00000004
#define SEEPROM_CS                        0x00000008
#define DEBUG_BIT_0                       0x00000010
#define DEBUG_BIT_1                       0x00000020
#define DEBUG_BIT_2                       0x00000040
//      RESERVED                          0x00000080
#define DEBUG_BIT_0_OE                    0x00000100
#define DEBUG_BIT_1_OE                    0x00000200
#define DEBUG_BIT_2_OE                    0x00000400
//      RESERVED                          0x00000800
#define DEBUG_BIT_0_STATE                 0x00001000
#define DEBUG_BIT_1_STATE                 0x00002000
#define DEBUG_BIT_2_STATE                 0x00004000
//      RESERVED                          0x00008000
#define GENERAL_BIT_0                     0x00010000
#define GENERAL_BIT_1                     0x00020000
#define GENERAL_BIT_2                     0x00040000
#define GENERAL_BIT_3                     0x00080000
#define RESET_HORIZON                     0x00100000
#define RESET_ATM                         0x00200000
#define RESET_RX                          0x00400000
#define RESET_TX                          0x00800000
#define RESET_HOST                        0x01000000
//      RESERVED                          0x02000000
#define TARGET_RETRY_DISABLE              0x04000000
#define ATM_LAYER_SELECT                  0x08000000
#define ATM_LAYER_STATUS                  0x10000000
//      RESERVED                          0xE0000000

/* Interrupt source and enable registers */

#define RX_DATA_AV                        0x00000001
#define RX_DISABLED                       0x00000002
#define TIMING_MARKER                     0x00000004
#define FORCED                            0x00000008
#define RX_BUS_MASTER_COMPLETE            0x00000010
#define TX_BUS_MASTER_COMPLETE            0x00000020
#define ABR_TX_CELL_COUNT_INT             0x00000040
#define DEBUG_INT                         0x00000080
//      RESERVED                          0xFFFFFF00

/* PIO and Bus Mastering */

#define MAX_PIO_COUNT                     0x000000ff // 255 - make tunable?
// 8188 is a hard limit for bus mastering
#define MAX_TRANSFER_COUNT                0x00001ffc // 8188
#define MASTER_TX_AUTO_APPEND_DESC        0x80000000

/* TX channel config command port */

#define PCR_TIMER_ACCESS                      0x0000
#define SCR_TIMER_ACCESS                      0x0001
#define BUCKET_CAPACITY_ACCESS                0x0002
#define BUCKET_FULLNESS_ACCESS                0x0003
#define RATE_TYPE_ACCESS                      0x0004
//      UNUSED                                0x00F8
#define TX_CHANNEL_CONFIG_MULT                0x0100
//      UNUSED                                0xF800
#define BUCKET_MAX_SIZE                       0x003f

/* TX channel config data port */

#define CLOCK_SELECT_SHIFT                    4
#define CLOCK_DISABLE                         0x00ff

#define IDLE_RATE_TYPE                       0x0
#define ABR_RATE_TYPE                        0x1
#define VBR_RATE_TYPE                        0x2
#define CBR_RATE_TYPE                        0x3

/* TX config register */

#define DRVR_DRVRBAR_ENABLE                   0x0001
#define TXCLK_MUX_SELECT_RCLK                 0x0002
#define TRANSMIT_TIMING_MARKER                0x0004
#define LOOPBACK_TIMING_MARKER                0x0008
#define TX_TEST_MODE_16MHz                    0x0000
#define TX_TEST_MODE_8MHz                     0x0010
#define TX_TEST_MODE_5_33MHz                  0x0020
#define TX_TEST_MODE_4MHz                     0x0030
#define TX_TEST_MODE_3_2MHz                   0x0040
#define TX_TEST_MODE_2_66MHz                  0x0050
#define TX_TEST_MODE_2_29MHz                  0x0060
#define TX_NORMAL_OPERATION                   0x0070
#define ABR_ROUND_ROBIN                       0x0080

/* TX status register */

#define IDLE_CHANNELS_MASK                    0x00FF
#define ABR_CELL_COUNT_REACHED_MULT           0x0100 
#define ABR_CELL_COUNT_REACHED_MASK           0xFF

/* RX config register */

#define NON_USER_CELLS_IN_ONE_CHANNEL         0x0008
#define RX_ENABLE                             0x0010
#define IGNORE_UNUSED_VPI_VCI_BITS_SET        0x0000
#define NON_USER_UNUSED_VPI_VCI_BITS_SET      0x0020
#define DISCARD_UNUSED_VPI_VCI_BITS_SET       0x0040

/* RX line config register */

#define SIGNAL_LOSS                           0x0001
#define FREQUENCY_DETECT_ERROR                0x0002
#define LOCK_DETECT_ERROR                     0x0004
#define SELECT_INTERNAL_LOOPBACK              0x0008
#define LOCK_DETECT_ENABLE                    0x0010
#define FREQUENCY_DETECT_ENABLE               0x0020
#define USER_FRAQ                             0x0040
#define GXTALOUT_SELECT_DIV4                  0x0080
#define GXTALOUT_SELECT_NO_GATING             0x0100
#define TIMING_MARKER_RECEIVED                0x0200

/* RX channel port */

#define RX_CHANNEL_MASK                       0x03FF
// UNUSED                                     0x3C00
#define FLUSH_CHANNEL                         0x4000
#define RX_CHANNEL_UPDATE_IN_PROGRESS         0x8000

/* Receive queue entry */

#define RX_Q_ENTRY_LENGTH_MASK            0x0000FFFF
#define RX_Q_ENTRY_CHANNEL_SHIFT          16
#define SIMONS_DODGEY_MARKER              0x08000000
#define RX_CONGESTION_EXPERIENCED         0x10000000
#define RX_CRC_10_OK                      0x20000000
#define RX_CRC_32_OK                      0x40000000
#define RX_COMPLETE_FRAME                 0x80000000

/*  Offsets and constants for use with the buffer memory         */

/* Buffer pointers and channel types */

#define BUFFER_PTR_MASK                   0x0000FFFF
#define RX_INT_THRESHOLD_MULT             0x00010000
#define RX_INT_THRESHOLD_MASK             0x07FF
#define INT_EVERY_N_CELLS                 0x08000000
#define CONGESTION_EXPERIENCED            0x10000000
#define FIRST_CELL_OF_AAL5_FRAME          0x20000000
#define CHANNEL_TYPE_AAL5                 0x00000000
#define CHANNEL_TYPE_RAW_CELLS            0x40000000
#define CHANNEL_TYPE_AAL3_4               0x80000000

/* Buffer status stuff */

#define BUFF_STATUS_MASK                  0x00030000
#define BUFF_STATUS_EMPTY                 0x00000000
#define BUFF_STATUS_CELL_AV               0x00010000
#define BUFF_STATUS_LAST_CELL_AV          0x00020000

/* Transmit channel stuff */

/* Receive channel stuff */

#define RX_CHANNEL_DISABLED               0x00000000
#define RX_CHANNEL_IDLE                   0x00000001

/*  General things */

#define INITIAL_CRC                       0xFFFFFFFF

// A Horizon u32, a byte! Really nasty. Horizon pointers are (32 bit)
// word addresses and so standard C pointer operations break (as they
// assume byte addresses); so we pretend that Horizon words (and word
// pointers) are bytes (and byte pointers) for the purposes of having
// a memory map that works.

typedef u8 HDW;

typedef struct cell_buf {
  HDW payload[12];
  HDW next;
  HDW cell_count;               // AAL5 rx bufs
  HDW res;
  union {
    HDW partial_crc;            // AAL5 rx bufs
    HDW cell_header;            // RAW     bufs
  } u;
} cell_buf;

typedef struct tx_ch_desc {
  HDW rd_buf_type;
  HDW wr_buf_type;
  HDW partial_crc;
  HDW cell_header;
} tx_ch_desc;

typedef struct rx_ch_desc {
  HDW wr_buf_type;
  HDW rd_buf_type;
} rx_ch_desc;

typedef struct rx_q_entry {
  HDW entry;
} rx_q_entry;

#define TX_CHANS 8
#define RX_CHANS 1024
#define RX_QS 1024
#define MAX_VCS RX_CHANS

/* Horizon buffer memory map */

// TX Channel Descriptors         2
// TX Initial Buffers             8 // TX_CHANS
#define BUFN1_SIZE              118 // (126 - TX_CHANS)
//      RX/TX Start/End Buffers   4
#define BUFN2_SIZE              124
//      RX Queue Entries         64
#define BUFN3_SIZE              192
//      RX Channel Descriptors  128
#define BUFN4_SIZE             1408
//      TOTAL cell_buff chunks 2048

//    cell_buf             bufs[2048];
//    HDW                  dws[32768];

typedef struct MEMMAP {
  tx_ch_desc  tx_descs[TX_CHANS];     //  8 *    4 =    32 , 0x0020
  cell_buf    inittxbufs[TX_CHANS];   // these are really
  cell_buf    bufn1[BUFN1_SIZE];      // part of this pool
  cell_buf    txfreebufstart;
  cell_buf    txfreebufend;
  cell_buf    rxfreebufstart;
  cell_buf    rxfreebufend;           // 8+118+1+1+1+1+124 = 254
  cell_buf    bufn2[BUFN2_SIZE];      // 16 *  254 =  4064 , 0x1000
  rx_q_entry  rx_q_entries[RX_QS];    //  1 * 1024 =  1024 , 0x1400
  cell_buf    bufn3[BUFN3_SIZE];      // 16 *  192 =  3072 , 0x2000
  rx_ch_desc  rx_descs[MAX_VCS];      //  2 * 1024 =  2048 , 0x2800
  cell_buf    bufn4[BUFN4_SIZE];      // 16 * 1408 = 22528 , 0x8000
} MEMMAP;

#define memmap ((MEMMAP *)0)

/* end horizon specific bits */

typedef enum {
  aal0,
  aal34,
  aal5
} hrz_aal;

typedef enum {
  tx_busy,
  rx_busy,
  ultra
} hrz_flags;

// a single struct pointed to by atm_vcc->dev_data

typedef struct {
  unsigned int        tx_rate;
  unsigned int        rx_rate;
  u16                 channel;
  u16                 tx_xbr_bits;
  u16                 tx_pcr_bits;
#if 0
  u16                 tx_scr_bits;
  u16                 tx_bucket_bits;
#endif
  hrz_aal             aal;
} hrz_vcc;

struct hrz_dev {
  
  u32                 iobase;
  u32 *               membase;

  struct sk_buff *    rx_skb;     // skb being RXed
  unsigned int        rx_bytes;   // bytes remaining to RX within region
  void *              rx_addr;    // addr to send bytes to (for PIO)
  unsigned int        rx_channel; // channel that the skb is going out on

  struct sk_buff *    tx_skb;     // skb being TXed
  unsigned int        tx_bytes;   // bytes remaining to TX within region
  void *              tx_addr;    // addr to send bytes from (for PIO)
  struct iovec *      tx_iovec;   // remaining regions
  unsigned int        tx_regions; // number of remaining regions

  spinlock_t          mem_lock;
  wait_queue_head_t   tx_queue;

  u8                  irq;
  unsigned long	      flags;
  u8                  tx_last;
  u8                  tx_idle;

  rx_q_entry *        rx_q_reset;
  rx_q_entry *        rx_q_entry;
  rx_q_entry *        rx_q_wrap;

  struct atm_dev *    atm_dev;

  u32                 last_vc;
  
  int                 noof_spare_buffers;
  u16                 spare_buffers[SPARE_BUFFER_POOL_SIZE];

  u16                 tx_channel_record[TX_CHANS];

  // this is what we follow when we get incoming data
  u32              txer[MAX_VCS/32];
  struct atm_vcc * rxer[MAX_VCS];

  // cell rate allocation
  spinlock_t       rate_lock;
  unsigned int     rx_avail;
  unsigned int     tx_avail;
  
  // dev stats
  unsigned long    tx_cell_count;
  unsigned long    rx_cell_count;
  unsigned long    hec_error_count;
  unsigned long    unassigned_cell_count;

  struct pci_dev * pci_dev;
  struct timer_list housekeeping;
};

typedef struct hrz_dev hrz_dev;

/* macros for use later */

#define BUF_PTR(cbptr) ((cbptr) - (cell_buf *) 0)

#define INTERESTING_INTERRUPTS \
  (RX_DATA_AV | RX_DISABLED | TX_BUS_MASTER_COMPLETE | RX_BUS_MASTER_COMPLETE)

// 190 cells by default (192 TX buffers - 2 elbow room, see docs)
#define TX_AAL5_LIMIT (190*ATM_CELL_PAYLOAD-ATM_AAL5_TRAILER) // 9112

// Have enough RX buffers (unless we allow other buffer splits)
#define RX_AAL5_LIMIT ATM_MAX_AAL5_PDU

/* multi-statement macro protector */
#define DW(x) do{ x } while(0)

#define HRZ_DEV(atm_dev) ((hrz_dev *) (atm_dev)->dev_data)
#define HRZ_VCC(atm_vcc) ((hrz_vcc *) (atm_vcc)->dev_data)

/* Turn the LEDs on and off                                                 */
// The LEDs bits are upside down in that setting the bit in the debug
// register will turn the appropriate LED off.

#define YELLOW_LED    DEBUG_BIT_0
#define GREEN_LED     DEBUG_BIT_1
#define YELLOW_LED_OE DEBUG_BIT_0_OE
#define GREEN_LED_OE  DEBUG_BIT_1_OE

#define GREEN_LED_OFF(dev)                      \
  wr_regl (dev, CONTROL_0_REG, rd_regl (dev, CONTROL_0_REG) | GREEN_LED)
#define GREEN_LED_ON(dev)                       \
  wr_regl (dev, CONTROL_0_REG, rd_regl (dev, CONTROL_0_REG) &~ GREEN_LED)
#define YELLOW_LED_OFF(dev)                     \
  wr_regl (dev, CONTROL_0_REG, rd_regl (dev, CONTROL_0_REG) | YELLOW_LED)
#define YELLOW_LED_ON(dev)                      \
  wr_regl (dev, CONTROL_0_REG, rd_regl (dev, CONTROL_0_REG) &~ YELLOW_LED)

typedef enum {
  round_up,
  round_down,
  round_nearest
} rounding;

#endif /* DRIVER_ATM_HORIZON_H */
Commit	Line	Data
1da177e4 LT	1	/*
	2	Madge Horizon ATM Adapter driver.
	3	Copyright (C) 1995-1999 Madge Networks Ltd.
	4
	5	This program is free software; you can redistribute it and/or modify
	6	it under the terms of the GNU General Public License as published by
	7	the Free Software Foundation; either version 2 of the License, or
	8	(at your option) any later version.
	9
	10	This program is distributed in the hope that it will be useful,
	11	but WITHOUT ANY WARRANTY; without even the implied warranty of
	12	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	13	GNU General Public License for more details.
	14
	15	You should have received a copy of the GNU General Public License
	16	along with this program; if not, write to the Free Software
	17	Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
	18
	19	The GNU GPL is contained in /usr/doc/copyright/GPL on a Debian
	20	system and in the file COPYING in the Linux kernel source.
	21	*/
	22
	23	/*
	24	IMPORTANT NOTE: Madge Networks no longer makes the adapters
	25	supported by this driver and makes no commitment to maintain it.
	26	*/
	27
	28	/* too many macros - change to inline functions */
	29
	30	#ifndef DRIVER_ATM_HORIZON_H
	31	#define DRIVER_ATM_HORIZON_H
	32
1da177e4 LT	33
	34	#ifdef CONFIG_ATM_HORIZON_DEBUG
	35	#define DEBUG_HORIZON
	36	#endif
	37
	38	#define DEV_LABEL "hrz"
	39
	40	#ifndef PCI_VENDOR_ID_MADGE
	41	#define PCI_VENDOR_ID_MADGE 0x10B6
	42	#endif
	43	#ifndef PCI_DEVICE_ID_MADGE_HORIZON
	44	#define PCI_DEVICE_ID_MADGE_HORIZON 0x1000
	45	#endif
	46
	47	// diagnostic output
	48
	49	#define PRINTK(severity,format,args...) \
	50	printk(severity DEV_LABEL ": " format "\n" , ## args)
	51
	52	#ifdef DEBUG_HORIZON
	53
	54	#define DBG_ERR 0x0001
	55	#define DBG_WARN 0x0002
	56	#define DBG_INFO 0x0004
	57	#define DBG_VCC 0x0008
	58	#define DBG_QOS 0x0010
	59	#define DBG_TX 0x0020
	60	#define DBG_RX 0x0040
	61	#define DBG_SKB 0x0080
	62	#define DBG_IRQ 0x0100
	63	#define DBG_FLOW 0x0200
	64	#define DBG_BUS 0x0400
	65	#define DBG_REGS 0x0800
	66	#define DBG_DATA 0x1000
	67	#define DBG_MASK 0x1fff
	68
	69	/* the ## prevents the annoying double expansion of the macro arguments */
	70	/* KERN_INFO is used since KERN_DEBUG often does not make it to the console */
	71	#define PRINTDB(bits,format,args...) \
	72	( (debug & (bits)) ? printk (KERN_INFO DEV_LABEL ": " format , ## args) : 1 )
	73	#define PRINTDM(bits,format,args...) \
	74	( (debug & (bits)) ? printk (format , ## args) : 1 )
	75	#define PRINTDE(bits,format,args...) \
	76	( (debug & (bits)) ? printk (format "\n" , ## args) : 1 )
	77	#define PRINTD(bits,format,args...) \
	78	( (debug & (bits)) ? printk (KERN_INFO DEV_LABEL ": " format "\n" , ## args) : 1 )
	79
	80	#else
	81
	82	#define PRINTD(bits,format,args...)
	83	#define PRINTDB(bits,format,args...)
	84	#define PRINTDM(bits,format,args...)
	85	#define PRINTDE(bits,format,args...)
	86
	87	#endif
	88
	89	#define PRINTDD(sec,fmt,args...)
	90	#define PRINTDDB(sec,fmt,args...)
	91	#define PRINTDDM(sec,fmt,args...)
	92	#define PRINTDDE(sec,fmt,args...)
	93
	94	// fixed constants
	95
	96	#define SPARE_BUFFER_POOL_SIZE MAX_VCS
97	#define HRZ_MAX_VPI 4
98	#define MIN_PCI_LATENCY 48 // 24 IS TOO SMALL
99
100	/* Horizon specific bits */
101	/* Register offsets */
102
103	#define HRZ_IO_EXTENT 0x80
104
105	#define DATA_PORT_OFF 0x00
106	#define TX_CHANNEL_PORT_OFF 0x04
107	#define TX_DESCRIPTOR_PORT_OFF 0x08
108	#define MEMORY_PORT_OFF 0x0C
109	#define MEM_WR_ADDR_REG_OFF 0x14
110	#define MEM_RD_ADDR_REG_OFF 0x18
111	#define CONTROL_0_REG 0x1C
112	#define INT_SOURCE_REG_OFF 0x20
113	#define INT_ENABLE_REG_OFF 0x24
114	#define MASTER_RX_ADDR_REG_OFF 0x28
115	#define MASTER_RX_COUNT_REG_OFF 0x2C
116	#define MASTER_TX_ADDR_REG_OFF 0x30
117	#define MASTER_TX_COUNT_REG_OFF 0x34
118	#define TX_DESCRIPTOR_REG_OFF 0x38
119	#define TX_CHANNEL_CONFIG_COMMAND_OFF 0x40
120	#define TX_CHANNEL_CONFIG_DATA_OFF 0x44
121	#define TX_FREE_BUFFER_COUNT_OFF 0x48
122	#define RX_FREE_BUFFER_COUNT_OFF 0x4C
123	#define TX_CONFIG_OFF 0x50
124	#define TX_STATUS_OFF 0x54
125	#define RX_CONFIG_OFF 0x58
126	#define RX_LINE_CONFIG_OFF 0x5C
127	#define RX_QUEUE_RD_PTR_OFF 0x60
128	#define RX_QUEUE_WR_PTR_OFF 0x64
129	#define MAX_AAL5_CELL_COUNT_OFF 0x68
130	#define RX_CHANNEL_PORT_OFF 0x6C
131	#define TX_CELL_COUNT_OFF 0x70
132	#define RX_CELL_COUNT_OFF 0x74
133	#define HEC_ERROR_COUNT_OFF 0x78
134	#define UNASSIGNED_CELL_COUNT_OFF 0x7C
135
136	/* Register bit definitions */
137
138	/* Control 0 register */
139
140	#define SEEPROM_DO 0x00000001
141	#define SEEPROM_DI 0x00000002
142	#define SEEPROM_SK 0x00000004
143	#define SEEPROM_CS 0x00000008
144	#define DEBUG_BIT_0 0x00000010
145	#define DEBUG_BIT_1 0x00000020
146	#define DEBUG_BIT_2 0x00000040
147	// RESERVED 0x00000080
148	#define DEBUG_BIT_0_OE 0x00000100
149	#define DEBUG_BIT_1_OE 0x00000200
150	#define DEBUG_BIT_2_OE 0x00000400
151	// RESERVED 0x00000800
152	#define DEBUG_BIT_0_STATE 0x00001000
153	#define DEBUG_BIT_1_STATE 0x00002000
154	#define DEBUG_BIT_2_STATE 0x00004000
155	// RESERVED 0x00008000
156	#define GENERAL_BIT_0 0x00010000
157	#define GENERAL_BIT_1 0x00020000
158	#define GENERAL_BIT_2 0x00040000
159	#define GENERAL_BIT_3 0x00080000
160	#define RESET_HORIZON 0x00100000
161	#define RESET_ATM 0x00200000
162	#define RESET_RX 0x00400000
163	#define RESET_TX 0x00800000
164	#define RESET_HOST 0x01000000
165	// RESERVED 0x02000000
166	#define TARGET_RETRY_DISABLE 0x04000000
167	#define ATM_LAYER_SELECT 0x08000000
168	#define ATM_LAYER_STATUS 0x10000000
169	// RESERVED 0xE0000000
170
171	/* Interrupt source and enable registers */
172
173	#define RX_DATA_AV 0x00000001
174	#define RX_DISABLED 0x00000002
175	#define TIMING_MARKER 0x00000004
176	#define FORCED 0x00000008
177	#define RX_BUS_MASTER_COMPLETE 0x00000010
178	#define TX_BUS_MASTER_COMPLETE 0x00000020
179	#define ABR_TX_CELL_COUNT_INT 0x00000040
180	#define DEBUG_INT 0x00000080
181	// RESERVED 0xFFFFFF00
182
183	/* PIO and Bus Mastering */
184
185	#define MAX_PIO_COUNT 0x000000ff // 255 - make tunable?
186	// 8188 is a hard limit for bus mastering
187	#define MAX_TRANSFER_COUNT 0x00001ffc // 8188
188	#define MASTER_TX_AUTO_APPEND_DESC 0x80000000
189
190	/* TX channel config command port */
191
192	#define PCR_TIMER_ACCESS 0x0000
193	#define SCR_TIMER_ACCESS 0x0001
194	#define BUCKET_CAPACITY_ACCESS 0x0002
195	#define BUCKET_FULLNESS_ACCESS 0x0003
196	#define RATE_TYPE_ACCESS 0x0004
197	// UNUSED 0x00F8
198	#define TX_CHANNEL_CONFIG_MULT 0x0100
199	// UNUSED 0xF800
200	#define BUCKET_MAX_SIZE 0x003f
201
202	/* TX channel config data port */
203
204	#define CLOCK_SELECT_SHIFT 4
205	#define CLOCK_DISABLE 0x00ff
206
207	#define IDLE_RATE_TYPE 0x0
208	#define ABR_RATE_TYPE 0x1
209	#define VBR_RATE_TYPE 0x2
210	#define CBR_RATE_TYPE 0x3
211
212	/* TX config register */
213
214	#define DRVR_DRVRBAR_ENABLE 0x0001
215	#define TXCLK_MUX_SELECT_RCLK 0x0002
216	#define TRANSMIT_TIMING_MARKER 0x0004
217	#define LOOPBACK_TIMING_MARKER 0x0008
218	#define TX_TEST_MODE_16MHz 0x0000
219	#define TX_TEST_MODE_8MHz 0x0010
220	#define TX_TEST_MODE_5_33MHz 0x0020
221	#define TX_TEST_MODE_4MHz 0x0030
222	#define TX_TEST_MODE_3_2MHz 0x0040
223	#define TX_TEST_MODE_2_66MHz 0x0050
224	#define TX_TEST_MODE_2_29MHz 0x0060
225	#define TX_NORMAL_OPERATION 0x0070
226	#define ABR_ROUND_ROBIN 0x0080
227
228	/* TX status register */
229
230	#define IDLE_CHANNELS_MASK 0x00FF
231	#define ABR_CELL_COUNT_REACHED_MULT 0x0100
232	#define ABR_CELL_COUNT_REACHED_MASK 0xFF
233
234	/* RX config register */
235
236	#define NON_USER_CELLS_IN_ONE_CHANNEL 0x0008
237	#define RX_ENABLE 0x0010
238	#define IGNORE_UNUSED_VPI_VCI_BITS_SET 0x0000
239	#define NON_USER_UNUSED_VPI_VCI_BITS_SET 0x0020
240	#define DISCARD_UNUSED_VPI_VCI_BITS_SET 0x0040
241
242	/* RX line config register */
243
244	#define SIGNAL_LOSS 0x0001
245	#define FREQUENCY_DETECT_ERROR 0x0002
246	#define LOCK_DETECT_ERROR 0x0004
247	#define SELECT_INTERNAL_LOOPBACK 0x0008
248	#define LOCK_DETECT_ENABLE 0x0010
249	#define FREQUENCY_DETECT_ENABLE 0x0020
250	#define USER_FRAQ 0x0040
251	#define GXTALOUT_SELECT_DIV4 0x0080
252	#define GXTALOUT_SELECT_NO_GATING 0x0100
253	#define TIMING_MARKER_RECEIVED 0x0200
254
255	/* RX channel port */
256
257	#define RX_CHANNEL_MASK 0x03FF
258	// UNUSED 0x3C00
259	#define FLUSH_CHANNEL 0x4000
260	#define RX_CHANNEL_UPDATE_IN_PROGRESS 0x8000
261
262	/* Receive queue entry */
263
264	#define RX_Q_ENTRY_LENGTH_MASK 0x0000FFFF
265	#define RX_Q_ENTRY_CHANNEL_SHIFT 16
266	#define SIMONS_DODGEY_MARKER 0x08000000
267	#define RX_CONGESTION_EXPERIENCED 0x10000000
268	#define RX_CRC_10_OK 0x20000000
269	#define RX_CRC_32_OK 0x40000000
270	#define RX_COMPLETE_FRAME 0x80000000
271
272	/* Offsets and constants for use with the buffer memory */
273
274	/* Buffer pointers and channel types */
275
276	#define BUFFER_PTR_MASK 0x0000FFFF
277	#define RX_INT_THRESHOLD_MULT 0x00010000
278	#define RX_INT_THRESHOLD_MASK 0x07FF
279	#define INT_EVERY_N_CELLS 0x08000000
280	#define CONGESTION_EXPERIENCED 0x10000000
281	#define FIRST_CELL_OF_AAL5_FRAME 0x20000000
282	#define CHANNEL_TYPE_AAL5 0x00000000
283	#define CHANNEL_TYPE_RAW_CELLS 0x40000000
284	#define CHANNEL_TYPE_AAL3_4 0x80000000
285
286	/* Buffer status stuff */
287
288	#define BUFF_STATUS_MASK 0x00030000
289	#define BUFF_STATUS_EMPTY 0x00000000
290	#define BUFF_STATUS_CELL_AV 0x00010000
291	#define BUFF_STATUS_LAST_CELL_AV 0x00020000
292
293	/* Transmit channel stuff */
294
295	/* Receive channel stuff */
296
297	#define RX_CHANNEL_DISABLED 0x00000000
298	#define RX_CHANNEL_IDLE 0x00000001
299
300	/* General things */
301
302	#define INITIAL_CRC 0xFFFFFFFF
303
304	// A Horizon u32, a byte! Really nasty. Horizon pointers are (32 bit)
305	// word addresses and so standard C pointer operations break (as they
306	// assume byte addresses); so we pretend that Horizon words (and word
307	// pointers) are bytes (and byte pointers) for the purposes of having
308	// a memory map that works.
309
310	typedef u8 HDW;
311
312	typedef struct cell_buf {
313	HDW payload[12];
314	HDW next;
315	HDW cell_count; // AAL5 rx bufs
316	HDW res;
317	union {
318	HDW partial_crc; // AAL5 rx bufs
319	HDW cell_header; // RAW bufs
320	} u;
321	} cell_buf;
322
323	typedef struct tx_ch_desc {
324	HDW rd_buf_type;
325	HDW wr_buf_type;
326	HDW partial_crc;
327	HDW cell_header;
328	} tx_ch_desc;
329
330	typedef struct rx_ch_desc {
331	HDW wr_buf_type;
332	HDW rd_buf_type;
333	} rx_ch_desc;
334
335	typedef struct rx_q_entry {
336	HDW entry;
337	} rx_q_entry;
338
339	#define TX_CHANS 8
340	#define RX_CHANS 1024
341	#define RX_QS 1024
342	#define MAX_VCS RX_CHANS
343
344	/* Horizon buffer memory map */
345
346	// TX Channel Descriptors 2
347	// TX Initial Buffers 8 // TX_CHANS
348	#define BUFN1_SIZE 118 // (126 - TX_CHANS)
349	// RX/TX Start/End Buffers 4
350	#define BUFN2_SIZE 124
351	// RX Queue Entries 64
352	#define BUFN3_SIZE 192
353	// RX Channel Descriptors 128
354	#define BUFN4_SIZE 1408
355	// TOTAL cell_buff chunks 2048
356
357	// cell_buf bufs[2048];
358	// HDW dws[32768];
359
360	typedef struct MEMMAP {
361	tx_ch_desc tx_descs[TX_CHANS]; // 8 * 4 = 32 , 0x0020
362	cell_buf inittxbufs[TX_CHANS]; // these are really
363	cell_buf bufn1[BUFN1_SIZE]; // part of this pool
364	cell_buf txfreebufstart;
365	cell_buf txfreebufend;
366	cell_buf rxfreebufstart;
367	cell_buf rxfreebufend; // 8+118+1+1+1+1+124 = 254
368	cell_buf bufn2[BUFN2_SIZE]; // 16 * 254 = 4064 , 0x1000
369	rx_q_entry rx_q_entries[RX_QS]; // 1 * 1024 = 1024 , 0x1400
370	cell_buf bufn3[BUFN3_SIZE]; // 16 * 192 = 3072 , 0x2000
371	rx_ch_desc rx_descs[MAX_VCS]; // 2 * 1024 = 2048 , 0x2800
372	cell_buf bufn4[BUFN4_SIZE]; // 16 * 1408 = 22528 , 0x8000
373	} MEMMAP;
374
375	#define memmap ((MEMMAP *)0)
376
377	/* end horizon specific bits */
378
379	typedef enum {
380	aal0,
381	aal34,
382	aal5
383	} hrz_aal;
384
385	typedef enum {
386	tx_busy,
387	rx_busy,
388	ultra
389	} hrz_flags;
390
391	// a single struct pointed to by atm_vcc->dev_data
392
393	typedef struct {
394	unsigned int tx_rate;
395	unsigned int rx_rate;
396	u16 channel;
397	u16 tx_xbr_bits;
398	u16 tx_pcr_bits;
399	#if 0
400	u16 tx_scr_bits;
401	u16 tx_bucket_bits;
402	#endif
403	hrz_aal aal;
404	} hrz_vcc;
405
406	struct hrz_dev {
407
408	u32 iobase;
409	u32 * membase;
410
411	struct sk_buff * rx_skb; // skb being RXed
412	unsigned int rx_bytes; // bytes remaining to RX within region
413	void * rx_addr; // addr to send bytes to (for PIO)
414	unsigned int rx_channel; // channel that the skb is going out on
415
416	struct sk_buff * tx_skb; // skb being TXed
417	unsigned int tx_bytes; // bytes remaining to TX within region
418	void * tx_addr; // addr to send bytes from (for PIO)
419	struct iovec * tx_iovec; // remaining regions
420	unsigned int tx_regions; // number of remaining regions
421
422	spinlock_t mem_lock;
423	wait_queue_head_t tx_queue;
424
425	u8 irq;
64b33619	426	unsigned long flags;
1da177e4 LT	427	u8 tx_last;
	428	u8 tx_idle;
	429
	430	rx_q_entry * rx_q_reset;
	431	rx_q_entry * rx_q_entry;
	432	rx_q_entry * rx_q_wrap;
	433
	434	struct atm_dev * atm_dev;
	435
	436	u32 last_vc;
	437
	438	int noof_spare_buffers;
	439	u16 spare_buffers[SPARE_BUFFER_POOL_SIZE];
	440
	441	u16 tx_channel_record[TX_CHANS];
	442
	443	// this is what we follow when we get incoming data
	444	u32 txer[MAX_VCS/32];
	445	struct atm_vcc * rxer[MAX_VCS];
	446
	447	// cell rate allocation
	448	spinlock_t rate_lock;
	449	unsigned int rx_avail;
	450	unsigned int tx_avail;
	451
	452	// dev stats
	453	unsigned long tx_cell_count;
	454	unsigned long rx_cell_count;
	455	unsigned long hec_error_count;
	456	unsigned long unassigned_cell_count;
	457
	458	struct pci_dev * pci_dev;
	459	struct timer_list housekeeping;
	460	};
	461
	462	typedef struct hrz_dev hrz_dev;
	463
	464	/* macros for use later */
	465
	466	#define BUF_PTR(cbptr) ((cbptr) - (cell_buf *) 0)
	467
	468	#define INTERESTING_INTERRUPTS \
	469	(RX_DATA_AV \| RX_DISABLED \| TX_BUS_MASTER_COMPLETE \| RX_BUS_MASTER_COMPLETE)
	470
	471	// 190 cells by default (192 TX buffers - 2 elbow room, see docs)
	472	#define TX_AAL5_LIMIT (190*ATM_CELL_PAYLOAD-ATM_AAL5_TRAILER) // 9112
	473
	474	// Have enough RX buffers (unless we allow other buffer splits)
	475	#define RX_AAL5_LIMIT ATM_MAX_AAL5_PDU
	476
	477	/* multi-statement macro protector */
	478	#define DW(x) do{ x } while(0)
	479
	480	#define HRZ_DEV(atm_dev) ((hrz_dev *) (atm_dev)->dev_data)
	481	#define HRZ_VCC(atm_vcc) ((hrz_vcc *) (atm_vcc)->dev_data)
	482
	483	/* Turn the LEDs on and off */
	484	// The LEDs bits are upside down in that setting the bit in the debug
	485	// register will turn the appropriate LED off.
	486
	487	#define YELLOW_LED DEBUG_BIT_0
	488	#define GREEN_LED DEBUG_BIT_1
	489	#define YELLOW_LED_OE DEBUG_BIT_0_OE
	490	#define GREEN_LED_OE DEBUG_BIT_1_OE
491
492	#define GREEN_LED_OFF(dev) \
493	wr_regl (dev, CONTROL_0_REG, rd_regl (dev, CONTROL_0_REG) \| GREEN_LED)
494	#define GREEN_LED_ON(dev) \
495	wr_regl (dev, CONTROL_0_REG, rd_regl (dev, CONTROL_0_REG) &~ GREEN_LED)
496	#define YELLOW_LED_OFF(dev) \
497	wr_regl (dev, CONTROL_0_REG, rd_regl (dev, CONTROL_0_REG) \| YELLOW_LED)
498	#define YELLOW_LED_ON(dev) \
499	wr_regl (dev, CONTROL_0_REG, rd_regl (dev, CONTROL_0_REG) &~ YELLOW_LED)
500
501	typedef enum {
502	round_up,
503	round_down,
504	round_nearest
505	} rounding;
506
507	#endif /* DRIVER_ATM_HORIZON_H */