Commit | Line | Data |
---|---|---|
8e1a6dd2 | 1 | # For a description of the syntax of this configuration file, |
e403149c | 2 | # see Documentation/kbuild/kconfig-language.txt. |
8e1a6dd2 CZ |
3 | |
4 | mainmenu "Linux/Xtensa Kernel Configuration" | |
5 | ||
6 | config FRAME_POINTER | |
35f9cd08 | 7 | def_bool n |
8e1a6dd2 | 8 | |
66701b14 | 9 | config ZONE_DMA |
35f9cd08 | 10 | def_bool y |
66701b14 | 11 | |
8e1a6dd2 | 12 | config XTENSA |
35f9cd08 | 13 | def_bool y |
ec7748b5 | 14 | select HAVE_IDE |
8e1a6dd2 CZ |
15 | help |
16 | Xtensa processors are 32-bit RISC machines designed by Tensilica | |
17 | primarily for embedded systems. These processors are both | |
18 | configurable and extensible. The Linux port to the Xtensa | |
19 | architecture supports all processor configurations and extensions, | |
20 | with reasonable minimum requirements. The Xtensa Linux project has | |
21 | a home page at <http://xtensa.sourceforge.net/>. | |
22 | ||
8e1a6dd2 | 23 | config RWSEM_XCHGADD_ALGORITHM |
35f9cd08 | 24 | def_bool y |
8e1a6dd2 | 25 | |
d4337aa5 | 26 | config GENERIC_FIND_NEXT_BIT |
35f9cd08 | 27 | def_bool y |
d4337aa5 AM |
28 | |
29 | config GENERIC_HWEIGHT | |
35f9cd08 | 30 | def_bool y |
d4337aa5 | 31 | |
8e1a6dd2 | 32 | config GENERIC_HARDIRQS |
35f9cd08 | 33 | def_bool y |
8e1a6dd2 | 34 | |
000af2c5 JW |
35 | config GENERIC_GPIO |
36 | def_bool y | |
37 | ||
f0d1b0b3 | 38 | config ARCH_HAS_ILOG2_U32 |
35f9cd08 | 39 | def_bool n |
f0d1b0b3 DH |
40 | |
41 | config ARCH_HAS_ILOG2_U64 | |
35f9cd08 | 42 | def_bool n |
f0d1b0b3 | 43 | |
5ea81769 AV |
44 | config NO_IOPORT |
45 | def_bool y | |
46 | ||
bdc80787 PA |
47 | config HZ |
48 | int | |
49 | default 100 | |
50 | ||
fcc8f0f8 JW |
51 | config GENERIC_TIME |
52 | def_bool y | |
53 | ||
8e1a6dd2 | 54 | source "init/Kconfig" |
dc52ddc0 | 55 | source "kernel/Kconfig.freezer" |
8e1a6dd2 | 56 | |
35f9cd08 JW |
57 | config MMU |
58 | def_bool n | |
59 | ||
4c0d2141 JW |
60 | config VARIANT_IRQ_SWITCH |
61 | def_bool n | |
62 | ||
8e1a6dd2 CZ |
63 | menu "Processor type and features" |
64 | ||
65 | choice | |
66 | prompt "Xtensa Processor Configuration" | |
173d6681 | 67 | default XTENSA_VARIANT_FSF |
8e1a6dd2 | 68 | |
173d6681 | 69 | config XTENSA_VARIANT_FSF |
0025427e | 70 | bool "fsf - default (not generic) configuration" |
35f9cd08 | 71 | select MMU |
0025427e CZ |
72 | |
73 | config XTENSA_VARIANT_DC232B | |
74 | bool "dc232b - Diamond 232L Standard Core Rev.B (LE)" | |
35f9cd08 | 75 | select MMU |
0025427e | 76 | help |
35f9cd08 | 77 | This variant refers to Tensilica's Diamond 232L Standard core Rev.B (LE). |
000af2c5 JW |
78 | |
79 | config XTENSA_VARIANT_S6000 | |
80 | bool "s6000 - Stretch software configurable processor" | |
81 | select VARIANT_IRQ_SWITCH | |
82 | select ARCH_REQUIRE_GPIOLIB | |
8e1a6dd2 CZ |
83 | endchoice |
84 | ||
8e1a6dd2 CZ |
85 | config XTENSA_UNALIGNED_USER |
86 | bool "Unaligned memory access in use space" | |
35f9cd08 JW |
87 | help |
88 | The Xtensa architecture currently does not handle unaligned | |
89 | memory accesses in hardware but through an exception handler. | |
90 | Per default, unaligned memory accesses are disabled in user space. | |
8e1a6dd2 | 91 | |
35f9cd08 | 92 | Say Y here to enable unaligned memory access in user space. |
8e1a6dd2 CZ |
93 | |
94 | config PREEMPT | |
95 | bool "Preemptible Kernel" | |
35f9cd08 JW |
96 | help |
97 | This option reduces the latency of the kernel when reacting to | |
98 | real-time or interactive events by allowing a low priority process to | |
99 | be preempted even if it is in kernel mode executing a system call. | |
100 | Unfortunately the kernel code has some race conditions if both | |
101 | CONFIG_SMP and CONFIG_PREEMPT are enabled, so this option is | |
102 | currently disabled if you are building an SMP kernel. | |
8e1a6dd2 | 103 | |
35f9cd08 JW |
104 | Say Y here if you are building a kernel for a desktop, embedded |
105 | or real-time system. Say N if you are unsure. | |
8e1a6dd2 CZ |
106 | |
107 | config MATH_EMULATION | |
108 | bool "Math emulation" | |
109 | help | |
110 | Can we use information of configuration file? | |
111 | ||
8e1a6dd2 CZ |
112 | endmenu |
113 | ||
35f9cd08 JW |
114 | config XTENSA_CALIBRATE_CCOUNT |
115 | def_bool n | |
116 | help | |
117 | On some platforms (XT2000, for example), the CPU clock rate can | |
118 | vary. The frequency can be determined, however, by measuring | |
119 | against a well known, fixed frequency, such as an UART oscillator. | |
120 | ||
121 | config SERIAL_CONSOLE | |
122 | def_bool n | |
123 | ||
124 | config XTENSA_ISS_NETWORK | |
125 | def_bool n | |
126 | ||
127 | menu "Bus options" | |
128 | ||
129 | config PCI | |
130 | bool "PCI support" | |
131 | default y | |
132 | help | |
133 | Find out whether you have a PCI motherboard. PCI is the name of a | |
134 | bus system, i.e. the way the CPU talks to the other stuff inside | |
135 | your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or | |
136 | VESA. If you have PCI, say Y, otherwise N. | |
137 | ||
138 | source "drivers/pci/Kconfig" | |
139 | ||
35e71f90 CZ |
140 | endmenu |
141 | ||
8e1a6dd2 CZ |
142 | menu "Platform options" |
143 | ||
144 | choice | |
145 | prompt "Xtensa System Type" | |
146 | default XTENSA_PLATFORM_ISS | |
147 | ||
148 | config XTENSA_PLATFORM_ISS | |
149 | bool "ISS" | |
35f9cd08 JW |
150 | select XTENSA_CALIBRATE_CCOUNT |
151 | select SERIAL_CONSOLE | |
152 | select XTENSA_ISS_NETWORK | |
8e1a6dd2 CZ |
153 | help |
154 | ISS is an acronym for Tensilica's Instruction Set Simulator. | |
155 | ||
156 | config XTENSA_PLATFORM_XT2000 | |
157 | bool "XT2000" | |
158 | help | |
159 | XT2000 is the name of Tensilica's feature-rich emulation platform. | |
160 | This hardware is capable of running a full Linux distribution. | |
161 | ||
f82e939f JW |
162 | config XTENSA_PLATFORM_S6105 |
163 | bool "S6105" | |
164 | select SERIAL_CONSOLE | |
165 | ||
8e1a6dd2 CZ |
166 | endchoice |
167 | ||
168 | ||
8e1a6dd2 CZ |
169 | config XTENSA_CPU_CLOCK |
170 | int "CPU clock rate [MHz]" | |
171 | depends on !XTENSA_CALIBRATE_CCOUNT | |
35f9cd08 | 172 | default 16 |
8e1a6dd2 CZ |
173 | |
174 | config GENERIC_CALIBRATE_DELAY | |
175 | bool "Auto calibration of the BogoMIPS value" | |
35f9cd08 | 176 | help |
82300bf4 | 177 | The BogoMIPS value can easily be derived from the CPU frequency. |
8e1a6dd2 CZ |
178 | |
179 | config CMDLINE_BOOL | |
180 | bool "Default bootloader kernel arguments" | |
181 | ||
182 | config CMDLINE | |
183 | string "Initial kernel command string" | |
184 | depends on CMDLINE_BOOL | |
185 | default "console=ttyS0,38400 root=/dev/ram" | |
186 | help | |
187 | On some architectures (EBSA110 and CATS), there is currently no way | |
188 | for the boot loader to pass arguments to the kernel. For these | |
189 | architectures, you should supply some command-line options at build | |
190 | time by entering them here. As a minimum, you should specify the | |
191 | memory size and the root device (e.g., mem=64M root=/dev/nfs). | |
192 | ||
82300bf4 CZ |
193 | source "mm/Kconfig" |
194 | ||
35f9cd08 JW |
195 | config HOTPLUG |
196 | bool "Support for hot-pluggable devices" | |
8e1a6dd2 | 197 | help |
35f9cd08 JW |
198 | Say Y here if you want to plug devices into your computer while |
199 | the system is running, and be able to use them quickly. In many | |
200 | cases, the devices can likewise be unplugged at any time too. | |
8e1a6dd2 | 201 | |
35f9cd08 JW |
202 | One well known example of this is PCMCIA- or PC-cards, credit-card |
203 | size devices such as network cards, modems or hard drives which are | |
204 | plugged into slots found on all modern laptop computers. Another | |
205 | example, used on modern desktops as well as laptops, is USB. | |
8e1a6dd2 | 206 | |
35f9cd08 JW |
207 | Enable HOTPLUG and build a modular kernel. Get agent software |
208 | (from <http://linux-hotplug.sourceforge.net/>) and install it. | |
209 | Then your kernel will automatically call out to a user mode "policy | |
210 | agent" (/sbin/hotplug) to load modules and set up software needed | |
211 | to use devices as you hotplug them. | |
8e1a6dd2 CZ |
212 | |
213 | source "drivers/pcmcia/Kconfig" | |
214 | ||
215 | source "drivers/pci/hotplug/Kconfig" | |
216 | ||
217 | endmenu | |
218 | ||
cab00891 | 219 | menu "Executable file formats" |
8e1a6dd2 CZ |
220 | |
221 | # only elf supported | |
222 | config KCORE_ELF | |
35f9cd08 | 223 | def_bool y |
8e1a6dd2 | 224 | depends on PROC_FS |
8e1a6dd2 CZ |
225 | help |
226 | If you enabled support for /proc file system then the file | |
227 | /proc/kcore will contain the kernel core image in ELF format. This | |
228 | can be used in gdb: | |
229 | ||
230 | $ cd /usr/src/linux ; gdb vmlinux /proc/kcore | |
231 | ||
232 | This is especially useful if you have compiled the kernel with the | |
233 | "-g" option to preserve debugging information. It is mainly used | |
234 | for examining kernel data structures on the live kernel. | |
235 | ||
236 | source "fs/Kconfig.binfmt" | |
237 | ||
238 | endmenu | |
239 | ||
d5950b43 SR |
240 | source "net/Kconfig" |
241 | ||
8e1a6dd2 CZ |
242 | source "drivers/Kconfig" |
243 | ||
244 | source "fs/Kconfig" | |
245 | ||
246 | menu "Xtensa initrd options" | |
247 | depends on BLK_DEV_INITRD | |
248 | ||
35f9cd08 | 249 | config EMBEDDED_RAMDISK |
8e1a6dd2 CZ |
250 | bool "Embed root filesystem ramdisk into the kernel" |
251 | ||
252 | config EMBEDDED_RAMDISK_IMAGE | |
cab00891 | 253 | string "Filename of gzipped ramdisk image" |
8e1a6dd2 CZ |
254 | depends on EMBEDDED_RAMDISK |
255 | default "ramdisk.gz" | |
256 | help | |
257 | This is the filename of the ramdisk image to be built into the | |
258 | kernel. Relative pathnames are relative to arch/xtensa/boot/ramdisk/. | |
259 | The ramdisk image is not part of the kernel distribution; you must | |
260 | provide one yourself. | |
261 | endmenu | |
262 | ||
263 | source "arch/xtensa/Kconfig.debug" | |
264 | ||
265 | source "security/Kconfig" | |
266 | ||
267 | source "crypto/Kconfig" | |
268 | ||
269 | source "lib/Kconfig" | |
270 | ||
271 |