[GitHub/mt8127/android_kernel_alcatel_ttab.git] / arch / ia64 / Kconfig

#
# For a description of the syntax of this configuration file,
# see Documentation/kbuild/kconfig-language.txt.
#

mainmenu "IA-64 Linux Kernel Configuration"

source "init/Kconfig"

menu "Processor type and features"

config IA64
	bool
	default y
	help
	  The Itanium Processor Family is Intel's 64-bit successor to
	  the 32-bit X86 line.  The IA-64 Linux project has a home
	  page at <http://www.linuxia64.org/> and a mailing list at
	  <linux-ia64@vger.kernel.org>.

config 64BIT
	bool
	default y

config MMU
	bool
	default y

config RWSEM_XCHGADD_ALGORITHM
	bool
	default y

config GENERIC_CALIBRATE_DELAY
	bool
	default y

config TIME_INTERPOLATION
	bool
	default y

config EFI
	bool
	default y

config GENERIC_IOMAP
	bool
	default y

config SCHED_NO_NO_OMIT_FRAME_POINTER
	bool
	default y

config IA64_UNCACHED_ALLOCATOR
	bool
	select GENERIC_ALLOCATOR

choice
	prompt "System type"
	default IA64_GENERIC

config IA64_GENERIC
	bool "generic"
	select NUMA
	select ACPI_NUMA
	select VIRTUAL_MEM_MAP
	select DISCONTIGMEM
	help
	  This selects the system type of your hardware.  A "generic" kernel
	  will run on any supported IA-64 system.  However, if you configure
	  a kernel for your specific system, it will be faster and smaller.

	  generic		For any supported IA-64 system
	  DIG-compliant		For DIG ("Developer's Interface Guide") compliant systems
	  HP-zx1/sx1000		For HP systems
	  HP-zx1/sx1000+swiotlb	For HP systems with (broken) DMA-constrained devices.
	  SGI-SN2		For SGI Altix systems
	  Ski-simulator		For the HP simulator <http://www.hpl.hp.com/research/linux/ski/>

	  If you don't know what to do, choose "generic".

config IA64_DIG
	bool "DIG-compliant"

config IA64_HP_ZX1
	bool "HP-zx1/sx1000"
	help
	  Build a kernel that runs on HP zx1 and sx1000 systems.  This adds
	  support for the HP I/O MMU.

config IA64_HP_ZX1_SWIOTLB
	bool "HP-zx1/sx1000 with software I/O TLB"
	help
	  Build a kernel that runs on HP zx1 and sx1000 systems even when they
	  have broken PCI devices which cannot DMA to full 32 bits.  Apart
	  from support for the HP I/O MMU, this includes support for the software
	  I/O TLB, which allows supporting the broken devices at the expense of
	  wasting some kernel memory (about 2MB by default).

config IA64_SGI_SN2
	bool "SGI-SN2"
	help
	  Selecting this option will optimize the kernel for use on sn2 based
	  systems, but the resulting kernel binary will not run on other
	  types of ia64 systems.  If you have an SGI Altix system, it's safe
	  to select this option.  If in doubt, select ia64 generic support
	  instead.

config IA64_HP_SIM
	bool "Ski-simulator"

endchoice

choice
	prompt "Processor type"
	default ITANIUM

config ITANIUM
	bool "Itanium"
	help
	  Select your IA-64 processor type.  The default is Itanium.
	  This choice is safe for all IA-64 systems, but may not perform
	  optimally on systems with, say, Itanium 2 or newer processors.

config MCKINLEY
	bool "Itanium 2"
	help
	  Select this to configure for an Itanium 2 (McKinley) processor.

endchoice

choice
	prompt "Kernel page size"
	default IA64_PAGE_SIZE_16KB

config IA64_PAGE_SIZE_4KB
	bool "4KB"
	help
	  This lets you select the page size of the kernel.  For best IA-64
	  performance, a page size of 8KB or 16KB is recommended.  For best
	  IA-32 compatibility, a page size of 4KB should be selected (the vast
	  majority of IA-32 binaries work perfectly fine with a larger page
	  size).  For Itanium 2 or newer systems, a page size of 64KB can also
	  be selected.

	  4KB                For best IA-32 compatibility
	  8KB                For best IA-64 performance
	  16KB               For best IA-64 performance
	  64KB               Requires Itanium 2 or newer processor.

	  If you don't know what to do, choose 16KB.

config IA64_PAGE_SIZE_8KB
	bool "8KB"

config IA64_PAGE_SIZE_16KB
	bool "16KB"

config IA64_PAGE_SIZE_64KB
	depends on !ITANIUM
	bool "64KB"

endchoice

source kernel/Kconfig.hz

config IA64_BRL_EMU
	bool
	depends on ITANIUM
	default y

# align cache-sensitive data to 128 bytes
config IA64_L1_CACHE_SHIFT
	int
	default "7" if MCKINLEY
	default "6" if ITANIUM

# align cache-sensitive data to 64 bytes
config NUMA
	bool "NUMA support"
	depends on !IA64_HP_SIM
	default y if IA64_SGI_SN2
	select ACPI_NUMA
	help
	  Say Y to compile the kernel to support NUMA (Non-Uniform Memory
	  Access).  This option is for configuring high-end multiprocessor
	  server systems.  If in doubt, say N.

config VIRTUAL_MEM_MAP
	bool "Virtual mem map"
	default y if !IA64_HP_SIM
	help
	  Say Y to compile the kernel with support for a virtual mem map.
	  This code also only takes effect if a memory hole of greater than
	  1 Gb is found during boot.  You must turn this option on if you
	  require the DISCONTIGMEM option for your machine. If you are
	  unsure, say Y.

config HOLES_IN_ZONE
	bool
	default y if VIRTUAL_MEM_MAP

config ARCH_DISCONTIGMEM_ENABLE
	bool "Discontiguous memory support"
	depends on (IA64_DIG || IA64_SGI_SN2 || IA64_GENERIC || IA64_HP_ZX1 || IA64_HP_ZX1_SWIOTLB) && NUMA && VIRTUAL_MEM_MAP
	default y if (IA64_SGI_SN2 || IA64_GENERIC) && NUMA
	help
	  Say Y to support efficient handling of discontiguous physical memory,
	  for architectures which are either NUMA (Non-Uniform Memory Access)
	  or have huge holes in the physical address space for other reasons.
	  See <file:Documentation/vm/numa> for more.

config IA64_CYCLONE
	bool "Cyclone (EXA) Time Source support"
	help
	  Say Y here to enable support for IBM EXA Cyclone time source.
	  If you're unsure, answer N.

config IOSAPIC
	bool
	depends on !IA64_HP_SIM
	default y

config IA64_SGI_SN_XP
	tristate "Support communication between SGI SSIs"
	select IA64_UNCACHED_ALLOCATOR
	help
	  An SGI machine can be divided into multiple Single System
	  Images which act independently of each other and have
	  hardware based memory protection from the others.  Enabling
	  this feature will allow for direct communication between SSIs
	  based on a network adapter and DMA messaging.

config FORCE_MAX_ZONEORDER
	int
	default "18"

config SMP
	bool "Symmetric multi-processing support"
	help
	  This enables support for systems with more than one CPU. If you have
	  a system with only one CPU, say N.  If you have a system with more
	  than one CPU, say Y.

	  If you say N here, the kernel will run on single and multiprocessor
	  systems, but will use only one CPU of a multiprocessor system.  If
	  you say Y here, the kernel will run on many, but not all,
	  single processor systems.  On a single processor system, the kernel
	  will run faster if you say N here.

	  See also the <file:Documentation/smp.txt> and the SMP-HOWTO
	  available at <http://www.tldp.org/docs.html#howto>.

	  If you don't know what to do here, say N.

config NR_CPUS
	int "Maximum number of CPUs (2-512)"
	range 2 512
	depends on SMP
	default "64"
	help
	  You should set this to the number of CPUs in your system, but
	  keep in mind that a kernel compiled for, e.g., 2 CPUs will boot but
	  only use 2 CPUs on a >2 CPU system.  Setting this to a value larger
	  than 64 will cause the use of a CPU mask array, causing a small
	  performance hit.

config HOTPLUG_CPU
	bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
	depends on SMP && EXPERIMENTAL
	select HOTPLUG
	default n
	---help---
	  Say Y here to experiment with turning CPUs off and on.  CPUs
	  can be controlled through /sys/devices/system/cpu/cpu#.
	  Say N if you want to disable CPU hotplug.

config SCHED_SMT
	bool "SMT scheduler support"
	depends on SMP
	default off
	help
	  Improves the CPU scheduler's decision making when dealing with
	  Intel IA64 chips with MultiThreading at a cost of slightly increased
	  overhead in some places. If unsure say N here.

config PREEMPT
	bool "Preemptible Kernel"
        help
          This option reduces the latency of the kernel when reacting to
          real-time or interactive events by allowing a low priority process to
          be preempted even if it is in kernel mode executing a system call.
          This allows applications to run more reliably even when the system is
          under load.

          Say Y here if you are building a kernel for a desktop, embedded
          or real-time system.  Say N if you are unsure.

source "mm/Kconfig"

config HAVE_DEC_LOCK
	bool
	depends on (SMP || PREEMPT)
	default y

config IA32_SUPPORT
	bool "Support for Linux/x86 binaries"
	help
	  IA-64 processors can execute IA-32 (X86) instructions.  By
	  saying Y here, the kernel will include IA-32 system call
	  emulation support which makes it possible to transparently
	  run IA-32 Linux binaries on an IA-64 Linux system.
	  If in doubt, say Y.

config COMPAT
	bool
	depends on IA32_SUPPORT
	default y

config IA64_MCA_RECOVERY
	tristate "MCA recovery from errors other than TLB."

config PERFMON
	bool "Performance monitor support"
	help
	  Selects whether support for the IA-64 performance monitor hardware
	  is included in the kernel.  This makes some kernel data-structures a
	  little bigger and slows down execution a bit, but it is generally
	  a good idea to turn this on.  If you're unsure, say Y.

config IA64_PALINFO
	tristate "/proc/pal support"
	help
	  If you say Y here, you are able to get PAL (Processor Abstraction
	  Layer) information in /proc/pal.  This contains useful information
	  about the processors in your systems, such as cache and TLB sizes
	  and the PAL firmware version in use.

	  To use this option, you have to ensure that the "/proc file system
	  support" (CONFIG_PROC_FS) is enabled, too.

config ACPI_DEALLOCATE_IRQ
	bool
	depends on IOSAPIC && EXPERIMENTAL
	default y

source "drivers/firmware/Kconfig"

source "fs/Kconfig.binfmt"

endmenu

menu "Power management and ACPI"

config PM
	bool "Power Management support"
	depends on !IA64_HP_SIM
	default y
	help
	  "Power Management" means that parts of your computer are shut
	  off or put into a power conserving "sleep" mode if they are not
	  being used.  There are two competing standards for doing this: APM
	  and ACPI.  If you want to use either one, say Y here and then also
	  to the requisite support below.

	  Power Management is most important for battery powered laptop
	  computers; if you have a laptop, check out the Linux Laptop home
	  page on the WWW at <http://www.linux-on-laptops.com/> and the
	  Battery Powered Linux mini-HOWTO, available from
	  <http://www.tldp.org/docs.html#howto>.

	  Note that, even if you say N here, Linux on the x86 architecture
	  will issue the hlt instruction if nothing is to be done, thereby
	  sending the processor to sleep and saving power.

config ACPI
	bool
	depends on !IA64_HP_SIM
	default y

if !IA64_HP_SIM

source "drivers/acpi/Kconfig"

endif

endmenu

if !IA64_HP_SIM

menu "Bus options (PCI, PCMCIA)"

config PCI
	bool "PCI support"
	help
	  Real IA-64 machines all have PCI/PCI-X/PCI Express busses.  Say Y
	  here unless you are using a simulator without PCI support.

config PCI_DOMAINS
	bool
	default PCI

source "drivers/pci/Kconfig"

source "drivers/pci/hotplug/Kconfig"

source "drivers/pcmcia/Kconfig"

endmenu

endif

source "net/Kconfig"

source "drivers/Kconfig"

source "fs/Kconfig"

source "lib/Kconfig"

#
# Use the generic interrupt handling code in kernel/irq/:
#
config GENERIC_HARDIRQS
	bool
	default y

config GENERIC_IRQ_PROBE
	bool
	default y

source "arch/ia64/hp/sim/Kconfig"

source "arch/ia64/oprofile/Kconfig"

source "arch/ia64/Kconfig.debug"

source "security/Kconfig"

source "crypto/Kconfig"
Commit	Line	Data
1da177e4 LT	1	#
	2	# For a description of the syntax of this configuration file,
	3	# see Documentation/kbuild/kconfig-language.txt.
	4	#
	5
	6	mainmenu "IA-64 Linux Kernel Configuration"
	7
	8	source "init/Kconfig"
	9
	10	menu "Processor type and features"
	11
	12	config IA64
	13	bool
	14	default y
	15	help
	16	The Itanium Processor Family is Intel's 64-bit successor to
	17	the 32-bit X86 line. The IA-64 Linux project has a home
	18	page at <http://www.linuxia64.org/> and a mailing list at
	19	<linux-ia64@vger.kernel.org>.
	20
	21	config 64BIT
	22	bool
	23	default y
	24
	25	config MMU
	26	bool
	27	default y
	28
	29	config RWSEM_XCHGADD_ALGORITHM
	30	bool
	31	default y
	32
	33	config GENERIC_CALIBRATE_DELAY
	34	bool
	35	default y
	36
	37	config TIME_INTERPOLATION
	38	bool
	39	default y
	40
	41	config EFI
	42	bool
	43	default y
	44
	45	config GENERIC_IOMAP
	46	bool
	47	default y
	48
7d12e522 AB	49	config SCHED_NO_NO_OMIT_FRAME_POINTER
	50	bool
	51	default y
	52
f14f75b8 JS	53	config IA64_UNCACHED_ALLOCATOR
	54	bool
	55	select GENERIC_ALLOCATOR
	56
1da177e4 LT	57	choice
	58	prompt "System type"
	59	default IA64_GENERIC
	60
	61	config IA64_GENERIC
	62	bool "generic"
	63	select NUMA
	64	select ACPI_NUMA
	65	select VIRTUAL_MEM_MAP
	66	select DISCONTIGMEM
	67	help
	68	This selects the system type of your hardware. A "generic" kernel
	69	will run on any supported IA-64 system. However, if you configure
	70	a kernel for your specific system, it will be faster and smaller.
	71
	72	generic For any supported IA-64 system
	73	DIG-compliant For DIG ("Developer's Interface Guide") compliant systems
	74	HP-zx1/sx1000 For HP systems
	75	HP-zx1/sx1000+swiotlb For HP systems with (broken) DMA-constrained devices.
	76	SGI-SN2 For SGI Altix systems
	77	Ski-simulator For the HP simulator <http://www.hpl.hp.com/research/linux/ski/>
	78
	79	If you don't know what to do, choose "generic".
	80
	81	config IA64_DIG
	82	bool "DIG-compliant"
	83
	84	config IA64_HP_ZX1
	85	bool "HP-zx1/sx1000"
	86	help
	87	Build a kernel that runs on HP zx1 and sx1000 systems. This adds
	88	support for the HP I/O MMU.
	89
	90	config IA64_HP_ZX1_SWIOTLB
	91	bool "HP-zx1/sx1000 with software I/O TLB"
	92	help
	93	Build a kernel that runs on HP zx1 and sx1000 systems even when they
	94	have broken PCI devices which cannot DMA to full 32 bits. Apart
	95	from support for the HP I/O MMU, this includes support for the software
	96	I/O TLB, which allows supporting the broken devices at the expense of
	97	wasting some kernel memory (about 2MB by default).
	98
	99	config IA64_SGI_SN2
	100	bool "SGI-SN2"
	101	help
	102	Selecting this option will optimize the kernel for use on sn2 based
	103	systems, but the resulting kernel binary will not run on other
	104	types of ia64 systems. If you have an SGI Altix system, it's safe
	105	to select this option. If in doubt, select ia64 generic support
	106	instead.
	107
	108	config IA64_HP_SIM
	109	bool "Ski-simulator"
	110
	111	endchoice
	112
	113	choice
	114	prompt "Processor type"
	115	default ITANIUM
	116
	117	config ITANIUM
	118	bool "Itanium"
	119	help
	120	Select your IA-64 processor type. The default is Itanium.
121	This choice is safe for all IA-64 systems, but may not perform
122	optimally on systems with, say, Itanium 2 or newer processors.
123
124	config MCKINLEY
125	bool "Itanium 2"
126	help
127	Select this to configure for an Itanium 2 (McKinley) processor.
128
129	endchoice
130
131	choice
132	prompt "Kernel page size"
133	default IA64_PAGE_SIZE_16KB
134
135	config IA64_PAGE_SIZE_4KB
136	bool "4KB"
137	help
138	This lets you select the page size of the kernel. For best IA-64
139	performance, a page size of 8KB or 16KB is recommended. For best
140	IA-32 compatibility, a page size of 4KB should be selected (the vast
141	majority of IA-32 binaries work perfectly fine with a larger page
142	size). For Itanium 2 or newer systems, a page size of 64KB can also
143	be selected.
144
145	4KB For best IA-32 compatibility
146	8KB For best IA-64 performance
147	16KB For best IA-64 performance
148	64KB Requires Itanium 2 or newer processor.
149
150	If you don't know what to do, choose 16KB.
151
152	config IA64_PAGE_SIZE_8KB
153	bool "8KB"
154
155	config IA64_PAGE_SIZE_16KB
156	bool "16KB"
157
158	config IA64_PAGE_SIZE_64KB
159	depends on !ITANIUM
160	bool "64KB"
161
162	endchoice
163
b5d23e5b CL	164	source kernel/Kconfig.hz
b5d23e5b CL	165
1da177e4 LT	166	config IA64_BRL_EMU
	167	bool
	168	depends on ITANIUM
	169	default y
	170
	171	# align cache-sensitive data to 128 bytes
	172	config IA64_L1_CACHE_SHIFT
	173	int
	174	default "7" if MCKINLEY
	175	default "6" if ITANIUM
	176
	177	# align cache-sensitive data to 64 bytes
	178	config NUMA
	179	bool "NUMA support"
	180	depends on !IA64_HP_SIM
	181	default y if IA64_SGI_SN2
	182	select ACPI_NUMA
	183	help
	184	Say Y to compile the kernel to support NUMA (Non-Uniform Memory
	185	Access). This option is for configuring high-end multiprocessor
	186	server systems. If in doubt, say N.
	187
	188	config VIRTUAL_MEM_MAP
	189	bool "Virtual mem map"
	190	default y if !IA64_HP_SIM
	191	help
	192	Say Y to compile the kernel with support for a virtual mem map.
	193	This code also only takes effect if a memory hole of greater than
	194	1 Gb is found during boot. You must turn this option on if you
	195	require the DISCONTIGMEM option for your machine. If you are
	196	unsure, say Y.
	197
	198	config HOLES_IN_ZONE
	199	bool
	200	default y if VIRTUAL_MEM_MAP
	201
3f22ab27	202	config ARCH_DISCONTIGMEM_ENABLE
1da177e4 LT	203	bool "Discontiguous memory support"
	204	depends on (IA64_DIG \|\| IA64_SGI_SN2 \|\| IA64_GENERIC \|\| IA64_HP_ZX1 \|\| IA64_HP_ZX1_SWIOTLB) && NUMA && VIRTUAL_MEM_MAP
	205	default y if (IA64_SGI_SN2 \|\| IA64_GENERIC) && NUMA
	206	help
	207	Say Y to support efficient handling of discontiguous physical memory,
	208	for architectures which are either NUMA (Non-Uniform Memory Access)
	209	or have huge holes in the physical address space for other reasons.
	210	See <file:Documentation/vm/numa> for more.
	211
	212	config IA64_CYCLONE
	213	bool "Cyclone (EXA) Time Source support"
	214	help
	215	Say Y here to enable support for IBM EXA Cyclone time source.
	216	If you're unsure, answer N.
	217
	218	config IOSAPIC
	219	bool
	220	depends on !IA64_HP_SIM
	221	default y
	222
b0d82bd5 DN	223	config IA64_SGI_SN_XP
b0d82bd5 DN	224	tristate "Support communication between SGI SSIs"
65ed0b33	225	select IA64_UNCACHED_ALLOCATOR
b0d82bd5 DN	226	help
	227	An SGI machine can be divided into multiple Single System
	228	Images which act independently of each other and have
	229	hardware based memory protection from the others. Enabling
	230	this feature will allow for direct communication between SSIs
	231	based on a network adapter and DMA messaging.
	232
1da177e4 LT	233	config FORCE_MAX_ZONEORDER
	234	int
	235	default "18"
	236
	237	config SMP
	238	bool "Symmetric multi-processing support"
	239	help
	240	This enables support for systems with more than one CPU. If you have
	241	a system with only one CPU, say N. If you have a system with more
	242	than one CPU, say Y.
	243
	244	If you say N here, the kernel will run on single and multiprocessor
	245	systems, but will use only one CPU of a multiprocessor system. If
	246	you say Y here, the kernel will run on many, but not all,
	247	single processor systems. On a single processor system, the kernel
	248	will run faster if you say N here.
	249
	250	See also the <file:Documentation/smp.txt> and the SMP-HOWTO
	251	available at <http://www.tldp.org/docs.html#howto>.
	252
	253	If you don't know what to do here, say N.
	254
	255	config NR_CPUS
	256	int "Maximum number of CPUs (2-512)"
	257	range 2 512
	258	depends on SMP
	259	default "64"
	260	help
	261	You should set this to the number of CPUs in your system, but
	262	keep in mind that a kernel compiled for, e.g., 2 CPUs will boot but
	263	only use 2 CPUs on a >2 CPU system. Setting this to a value larger
	264	than 64 will cause the use of a CPU mask array, causing a small
	265	performance hit.
	266
	267	config HOTPLUG_CPU
	268	bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
	269	depends on SMP && EXPERIMENTAL
	270	select HOTPLUG
	271	default n
	272	---help---
	273	Say Y here to experiment with turning CPUs off and on. CPUs
	274	can be controlled through /sys/devices/system/cpu/cpu#.
	275	Say N if you want to disable CPU hotplug.
	276
7a9bdd88 SS	277	config SCHED_SMT
	278	bool "SMT scheduler support"
	279	depends on SMP
	280	default off
	281	help
	282	Improves the CPU scheduler's decision making when dealing with
	283	Intel IA64 chips with MultiThreading at a cost of slightly increased
	284	overhead in some places. If unsure say N here.
	285
1da177e4 LT	286	config PREEMPT
	287	bool "Preemptible Kernel"
	288	help
	289	This option reduces the latency of the kernel when reacting to
	290	real-time or interactive events by allowing a low priority process to
	291	be preempted even if it is in kernel mode executing a system call.
	292	This allows applications to run more reliably even when the system is
	293	under load.
	294
	295	Say Y here if you are building a kernel for a desktop, embedded
	296	or real-time system. Say N if you are unsure.
	297
3f22ab27 DH	298	source "mm/Kconfig"
3f22ab27 DH	299
1da177e4 LT	300	config HAVE_DEC_LOCK
	301	bool
	302	depends on (SMP \|\| PREEMPT)
	303	default y
	304
	305	config IA32_SUPPORT
	306	bool "Support for Linux/x86 binaries"
	307	help
	308	IA-64 processors can execute IA-32 (X86) instructions. By
	309	saying Y here, the kernel will include IA-32 system call
	310	emulation support which makes it possible to transparently
	311	run IA-32 Linux binaries on an IA-64 Linux system.
	312	If in doubt, say Y.
	313
	314	config COMPAT
	315	bool
	316	depends on IA32_SUPPORT
	317	default y
	318
	319	config IA64_MCA_RECOVERY
	320	tristate "MCA recovery from errors other than TLB."
	321
	322	config PERFMON
	323	bool "Performance monitor support"
	324	help
	325	Selects whether support for the IA-64 performance monitor hardware
	326	is included in the kernel. This makes some kernel data-structures a
	327	little bigger and slows down execution a bit, but it is generally
	328	a good idea to turn this on. If you're unsure, say Y.
	329
	330	config IA64_PALINFO
	331	tristate "/proc/pal support"
	332	help
	333	If you say Y here, you are able to get PAL (Processor Abstraction
	334	Layer) information in /proc/pal. This contains useful information
	335	about the processors in your systems, such as cache and TLB sizes
	336	and the PAL firmware version in use.
	337
	338	To use this option, you have to ensure that the "/proc file system
	339	support" (CONFIG_PROC_FS) is enabled, too.
	340
	341	config ACPI_DEALLOCATE_IRQ
	342	bool
	343	depends on IOSAPIC && EXPERIMENTAL
	344	default y
	345
	346	source "drivers/firmware/Kconfig"
	347
	348	source "fs/Kconfig.binfmt"
	349
	350	endmenu
	351
	352	menu "Power management and ACPI"
	353
	354	config PM
	355	bool "Power Management support"
605036cf	356	depends on !IA64_HP_SIM
1da177e4 LT	357	default y
	358	help
	359	"Power Management" means that parts of your computer are shut
	360	off or put into a power conserving "sleep" mode if they are not
	361	being used. There are two competing standards for doing this: APM
	362	and ACPI. If you want to use either one, say Y here and then also
	363	to the requisite support below.
	364
	365	Power Management is most important for battery powered laptop
	366	computers; if you have a laptop, check out the Linux Laptop home
	367	page on the WWW at <http://www.linux-on-laptops.com/> and the
	368	Battery Powered Linux mini-HOWTO, available from
	369	<http://www.tldp.org/docs.html#howto>.
	370
	371	Note that, even if you say N here, Linux on the x86 architecture
	372	will issue the hlt instruction if nothing is to be done, thereby
	373	sending the processor to sleep and saving power.
	374
	375	config ACPI
	376	bool
	377	depends on !IA64_HP_SIM
	378	default y
	379
	380	if !IA64_HP_SIM
	381
	382	source "drivers/acpi/Kconfig"
	383
	384	endif
	385
	386	endmenu
	387
	388	if !IA64_HP_SIM
	389
	390	menu "Bus options (PCI, PCMCIA)"
	391
	392	config PCI
	393	bool "PCI support"
	394	help
85f265d8 CH	395	Real IA-64 machines all have PCI/PCI-X/PCI Express busses. Say Y
85f265d8 CH	396	here unless you are using a simulator without PCI support.
1da177e4 LT	397
	398	config PCI_DOMAINS
	399	bool
	400	default PCI
	401
	402	source "drivers/pci/Kconfig"
	403
	404	source "drivers/pci/hotplug/Kconfig"
	405
	406	source "drivers/pcmcia/Kconfig"
	407
	408	endmenu
	409
	410	endif
	411
d5950b43 SR	412	source "net/Kconfig"
d5950b43 SR	413
1da177e4 LT	414	source "drivers/Kconfig"
	415
	416	source "fs/Kconfig"
	417
	418	source "lib/Kconfig"
	419
	420	#
	421	# Use the generic interrupt handling code in kernel/irq/:
	422	#
	423	config GENERIC_HARDIRQS
	424	bool
	425	default y
	426
	427	config GENERIC_IRQ_PROBE
	428	bool
	429	default y
	430
	431	source "arch/ia64/hp/sim/Kconfig"
	432
	433	source "arch/ia64/oprofile/Kconfig"
	434
	435	source "arch/ia64/Kconfig.debug"
	436
	437	source "security/Kconfig"
	438
	439	source "crypto/Kconfig"