Commit | Line | Data |
---|---|---|
1da177e4 | 1 | /* |
dbdf9ced | 2 | * linux/arch/arm/mach-omap1/board-h2.c |
1da177e4 LT |
3 | * |
4 | * Board specific inits for OMAP-1610 H2 | |
5 | * | |
6 | * Copyright (C) 2001 RidgeRun, Inc. | |
7 | * Author: Greg Lonnon <glonnon@ridgerun.com> | |
8 | * | |
9 | * Copyright (C) 2002 MontaVista Software, Inc. | |
10 | * | |
11 | * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6 | |
12 | * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com> | |
13 | * | |
14 | * H2 specific changes and cleanup | |
15 | * Copyright (C) 2004 Nokia Corporation by Imre Deak <imre.deak@nokia.com> | |
16 | * | |
17 | * This program is free software; you can redistribute it and/or modify | |
18 | * it under the terms of the GNU General Public License version 2 as | |
19 | * published by the Free Software Foundation. | |
20 | */ | |
2f8163ba | 21 | #include <linux/gpio.h> |
1da177e4 | 22 | #include <linux/kernel.h> |
d052d1be | 23 | #include <linux/platform_device.h> |
1da177e4 | 24 | #include <linux/delay.h> |
8056c6cb | 25 | #include <linux/i2c.h> |
1da177e4 | 26 | #include <linux/mtd/mtd.h> |
9b6553cd | 27 | #include <linux/mtd/nand.h> |
1da177e4 | 28 | #include <linux/mtd/partitions.h> |
561b036a | 29 | #include <linux/mtd/physmap.h> |
9b6553cd | 30 | #include <linux/input.h> |
6d16bfb5 | 31 | #include <linux/i2c/tps65010.h> |
3bc48014 | 32 | #include <linux/smc91x.h> |
ddba6c7f | 33 | #include <linux/omapfb.h> |
de6ca33a | 34 | #include <linux/platform_data/gpio-omap.h> |
dafbeadf | 35 | #include <linux/leds.h> |
1da177e4 | 36 | |
1da177e4 LT |
37 | #include <asm/mach-types.h> |
38 | #include <asm/mach/arch.h> | |
1da177e4 LT |
39 | #include <asm/mach/map.h> |
40 | ||
70c494c3 | 41 | #include <mach/mux.h> |
45c3eb7d | 42 | #include <linux/omap-dma.h> |
54b693d4 | 43 | #include <mach/tc.h> |
2f7cd573 | 44 | #include <mach/irda.h> |
2203747c | 45 | #include <linux/platform_data/keypad-omap.h> |
578fad4d | 46 | #include <mach/flash.h> |
1da177e4 | 47 | |
2e3ee9f4 | 48 | #include <mach/hardware.h> |
b924b204 | 49 | #include <mach/usb.h> |
2e3ee9f4 TL |
50 | |
51 | #include "common.h" | |
eb6b0b18 | 52 | #include "board-h2.h" |
8c4cc005 | 53 | #include "dma.h" |
eb6b0b18 TL |
54 | |
55 | /* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */ | |
56 | #define OMAP1610_ETHR_START 0x04000300 | |
57 | ||
da1f026b | 58 | static const unsigned int h2_keymap[] = { |
9b6553cd | 59 | KEY(0, 0, KEY_LEFT), |
da1f026b JK |
60 | KEY(1, 0, KEY_RIGHT), |
61 | KEY(2, 0, KEY_3), | |
62 | KEY(3, 0, KEY_F10), | |
63 | KEY(4, 0, KEY_F5), | |
64 | KEY(5, 0, KEY_9), | |
65 | KEY(0, 1, KEY_DOWN), | |
9b6553cd | 66 | KEY(1, 1, KEY_UP), |
da1f026b JK |
67 | KEY(2, 1, KEY_2), |
68 | KEY(3, 1, KEY_F9), | |
69 | KEY(4, 1, KEY_F7), | |
70 | KEY(5, 1, KEY_0), | |
71 | KEY(0, 2, KEY_ENTER), | |
72 | KEY(1, 2, KEY_6), | |
9b6553cd | 73 | KEY(2, 2, KEY_1), |
da1f026b JK |
74 | KEY(3, 2, KEY_F2), |
75 | KEY(4, 2, KEY_F6), | |
76 | KEY(5, 2, KEY_HOME), | |
77 | KEY(0, 3, KEY_8), | |
78 | KEY(1, 3, KEY_5), | |
79 | KEY(2, 3, KEY_F12), | |
9b6553cd | 80 | KEY(3, 3, KEY_F3), |
da1f026b JK |
81 | KEY(4, 3, KEY_F8), |
82 | KEY(5, 3, KEY_END), | |
83 | KEY(0, 4, KEY_7), | |
84 | KEY(1, 4, KEY_4), | |
85 | KEY(2, 4, KEY_F11), | |
86 | KEY(3, 4, KEY_F1), | |
9b6553cd | 87 | KEY(4, 4, KEY_F4), |
da1f026b JK |
88 | KEY(5, 4, KEY_ESC), |
89 | KEY(0, 5, KEY_F13), | |
90 | KEY(1, 5, KEY_F14), | |
91 | KEY(2, 5, KEY_F15), | |
92 | KEY(3, 5, KEY_F16), | |
93 | KEY(4, 5, KEY_SLEEP), | |
9b6553cd TL |
94 | }; |
95 | ||
96 | static struct mtd_partition h2_nor_partitions[] = { | |
1da177e4 LT |
97 | /* bootloader (U-Boot, etc) in first sector */ |
98 | { | |
99 | .name = "bootloader", | |
100 | .offset = 0, | |
101 | .size = SZ_128K, | |
102 | .mask_flags = MTD_WRITEABLE, /* force read-only */ | |
103 | }, | |
104 | /* bootloader params in the next sector */ | |
105 | { | |
106 | .name = "params", | |
107 | .offset = MTDPART_OFS_APPEND, | |
108 | .size = SZ_128K, | |
109 | .mask_flags = 0, | |
110 | }, | |
111 | /* kernel */ | |
112 | { | |
113 | .name = "kernel", | |
114 | .offset = MTDPART_OFS_APPEND, | |
115 | .size = SZ_2M, | |
116 | .mask_flags = 0 | |
117 | }, | |
118 | /* file system */ | |
119 | { | |
120 | .name = "filesystem", | |
121 | .offset = MTDPART_OFS_APPEND, | |
122 | .size = MTDPART_SIZ_FULL, | |
123 | .mask_flags = 0 | |
124 | } | |
125 | }; | |
126 | ||
561b036a | 127 | static struct physmap_flash_data h2_nor_data = { |
1da177e4 | 128 | .width = 2, |
561b036a | 129 | .set_vpp = omap1_set_vpp, |
9b6553cd TL |
130 | .parts = h2_nor_partitions, |
131 | .nr_parts = ARRAY_SIZE(h2_nor_partitions), | |
1da177e4 LT |
132 | }; |
133 | ||
9b6553cd | 134 | static struct resource h2_nor_resource = { |
7c38cf02 | 135 | /* This is on CS3, wherever it's mapped */ |
1da177e4 LT |
136 | .flags = IORESOURCE_MEM, |
137 | }; | |
138 | ||
9b6553cd | 139 | static struct platform_device h2_nor_device = { |
561b036a | 140 | .name = "physmap-flash", |
1da177e4 LT |
141 | .id = 0, |
142 | .dev = { | |
9b6553cd | 143 | .platform_data = &h2_nor_data, |
1da177e4 LT |
144 | }, |
145 | .num_resources = 1, | |
9b6553cd | 146 | .resource = &h2_nor_resource, |
1da177e4 LT |
147 | }; |
148 | ||
a524626b TL |
149 | static struct mtd_partition h2_nand_partitions[] = { |
150 | #if 0 | |
151 | /* REVISIT: enable these partitions if you make NAND BOOT | |
152 | * work on your H2 (rev C or newer); published versions of | |
153 | * x-load only support P2 and H3. | |
154 | */ | |
155 | { | |
156 | .name = "xloader", | |
157 | .offset = 0, | |
158 | .size = 64 * 1024, | |
159 | .mask_flags = MTD_WRITEABLE, /* force read-only */ | |
160 | }, | |
161 | { | |
162 | .name = "bootloader", | |
163 | .offset = MTDPART_OFS_APPEND, | |
164 | .size = 256 * 1024, | |
165 | .mask_flags = MTD_WRITEABLE, /* force read-only */ | |
166 | }, | |
167 | { | |
168 | .name = "params", | |
169 | .offset = MTDPART_OFS_APPEND, | |
170 | .size = 192 * 1024, | |
171 | }, | |
172 | { | |
173 | .name = "kernel", | |
174 | .offset = MTDPART_OFS_APPEND, | |
175 | .size = 2 * SZ_1M, | |
176 | }, | |
177 | #endif | |
178 | { | |
179 | .name = "filesystem", | |
180 | .size = MTDPART_SIZ_FULL, | |
181 | .offset = MTDPART_OFS_APPEND, | |
182 | }, | |
183 | }; | |
184 | ||
414f552a LM |
185 | #define H2_NAND_RB_GPIO_PIN 62 |
186 | ||
187 | static int h2_nand_dev_ready(struct mtd_info *mtd) | |
188 | { | |
189 | return gpio_get_value(H2_NAND_RB_GPIO_PIN); | |
190 | } | |
191 | ||
5db98f75 | 192 | static struct platform_nand_data h2_nand_platdata = { |
414f552a LM |
193 | .chip = { |
194 | .nr_chips = 1, | |
195 | .chip_offset = 0, | |
196 | .nr_partitions = ARRAY_SIZE(h2_nand_partitions), | |
197 | .partitions = h2_nand_partitions, | |
198 | .options = NAND_SAMSUNG_LP_OPTIONS, | |
414f552a LM |
199 | }, |
200 | .ctrl = { | |
31cde044 | 201 | .cmd_ctrl = omap1_nand_cmd_ctl, |
414f552a | 202 | .dev_ready = h2_nand_dev_ready, |
414f552a | 203 | }, |
a524626b TL |
204 | }; |
205 | ||
206 | static struct resource h2_nand_resource = { | |
207 | .flags = IORESOURCE_MEM, | |
208 | }; | |
209 | ||
210 | static struct platform_device h2_nand_device = { | |
414f552a | 211 | .name = "gen_nand", |
a524626b TL |
212 | .id = 0, |
213 | .dev = { | |
414f552a | 214 | .platform_data = &h2_nand_platdata, |
a524626b TL |
215 | }, |
216 | .num_resources = 1, | |
217 | .resource = &h2_nand_resource, | |
218 | }; | |
a524626b | 219 | |
3bc48014 LM |
220 | static struct smc91x_platdata h2_smc91x_info = { |
221 | .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, | |
222 | .leda = RPC_LED_100_10, | |
223 | .ledb = RPC_LED_TX_RX, | |
224 | }; | |
225 | ||
1da177e4 LT |
226 | static struct resource h2_smc91x_resources[] = { |
227 | [0] = { | |
228 | .start = OMAP1610_ETHR_START, /* Physical */ | |
229 | .end = OMAP1610_ETHR_START + 0xf, | |
230 | .flags = IORESOURCE_MEM, | |
231 | }, | |
232 | [1] = { | |
e7b3dc7e | 233 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, |
1da177e4 LT |
234 | }, |
235 | }; | |
236 | ||
237 | static struct platform_device h2_smc91x_device = { | |
238 | .name = "smc91x", | |
239 | .id = 0, | |
3bc48014 LM |
240 | .dev = { |
241 | .platform_data = &h2_smc91x_info, | |
242 | }, | |
1da177e4 LT |
243 | .num_resources = ARRAY_SIZE(h2_smc91x_resources), |
244 | .resource = h2_smc91x_resources, | |
245 | }; | |
246 | ||
9b6553cd TL |
247 | static struct resource h2_kp_resources[] = { |
248 | [0] = { | |
249 | .start = INT_KEYBOARD, | |
250 | .end = INT_KEYBOARD, | |
251 | .flags = IORESOURCE_IRQ, | |
252 | }, | |
253 | }; | |
254 | ||
da1f026b JK |
255 | static const struct matrix_keymap_data h2_keymap_data = { |
256 | .keymap = h2_keymap, | |
257 | .keymap_size = ARRAY_SIZE(h2_keymap), | |
258 | }; | |
259 | ||
9b6553cd | 260 | static struct omap_kp_platform_data h2_kp_data = { |
4d24607b KS |
261 | .rows = 8, |
262 | .cols = 8, | |
da1f026b JK |
263 | .keymap_data = &h2_keymap_data, |
264 | .rep = true, | |
4d24607b | 265 | .delay = 9, |
da1f026b | 266 | .dbounce = true, |
9b6553cd TL |
267 | }; |
268 | ||
269 | static struct platform_device h2_kp_device = { | |
270 | .name = "omap-keypad", | |
271 | .id = -1, | |
272 | .dev = { | |
273 | .platform_data = &h2_kp_data, | |
274 | }, | |
275 | .num_resources = ARRAY_SIZE(h2_kp_resources), | |
276 | .resource = h2_kp_resources, | |
277 | }; | |
278 | ||
279 | #define H2_IRDA_FIRSEL_GPIO_PIN 17 | |
280 | ||
9b6553cd TL |
281 | static struct omap_irda_config h2_irda_data = { |
282 | .transceiver_cap = IR_SIRMODE | IR_MIRMODE | IR_FIRMODE, | |
283 | .rx_channel = OMAP_DMA_UART3_RX, | |
284 | .tx_channel = OMAP_DMA_UART3_TX, | |
285 | .dest_start = UART3_THR, | |
286 | .src_start = UART3_RHR, | |
287 | .tx_trigger = 0, | |
288 | .rx_trigger = 0, | |
289 | }; | |
290 | ||
291 | static struct resource h2_irda_resources[] = { | |
292 | [0] = { | |
293 | .start = INT_UART3, | |
294 | .end = INT_UART3, | |
295 | .flags = IORESOURCE_IRQ, | |
296 | }, | |
297 | }; | |
a524626b TL |
298 | |
299 | static u64 irda_dmamask = 0xffffffff; | |
300 | ||
9b6553cd TL |
301 | static struct platform_device h2_irda_device = { |
302 | .name = "omapirda", | |
303 | .id = 0, | |
304 | .dev = { | |
305 | .platform_data = &h2_irda_data, | |
a524626b | 306 | .dma_mask = &irda_dmamask, |
9b6553cd TL |
307 | }, |
308 | .num_resources = ARRAY_SIZE(h2_irda_resources), | |
309 | .resource = h2_irda_resources, | |
310 | }; | |
311 | ||
dafbeadf BW |
312 | static struct gpio_led h2_gpio_led_pins[] = { |
313 | { | |
314 | .name = "h2:red", | |
315 | .default_trigger = "heartbeat", | |
316 | .gpio = 3, | |
317 | }, | |
318 | { | |
319 | .name = "h2:green", | |
320 | .default_trigger = "cpu0", | |
321 | .gpio = OMAP_MPUIO(4), | |
322 | }, | |
323 | }; | |
324 | ||
325 | static struct gpio_led_platform_data h2_gpio_led_data = { | |
326 | .leds = h2_gpio_led_pins, | |
327 | .num_leds = ARRAY_SIZE(h2_gpio_led_pins), | |
328 | }; | |
329 | ||
330 | static struct platform_device h2_gpio_leds = { | |
331 | .name = "leds-gpio", | |
332 | .id = -1, | |
333 | .dev = { | |
334 | .platform_data = &h2_gpio_led_data, | |
335 | }, | |
336 | }; | |
337 | ||
1da177e4 | 338 | static struct platform_device *h2_devices[] __initdata = { |
9b6553cd | 339 | &h2_nor_device, |
78be6325 | 340 | &h2_nand_device, |
1da177e4 | 341 | &h2_smc91x_device, |
9b6553cd TL |
342 | &h2_irda_device, |
343 | &h2_kp_device, | |
dafbeadf | 344 | &h2_gpio_leds, |
1da177e4 LT |
345 | }; |
346 | ||
347 | static void __init h2_init_smc91x(void) | |
348 | { | |
f2d18fea | 349 | if (gpio_request(0, "SMC91x irq") < 0) { |
1da177e4 LT |
350 | printk("Error requesting gpio 0 for smc91x irq\n"); |
351 | return; | |
352 | } | |
1da177e4 LT |
353 | } |
354 | ||
d8874665 TL |
355 | static int tps_setup(struct i2c_client *client, void *context) |
356 | { | |
357 | tps65010_config_vregs1(TPS_LDO2_ENABLE | TPS_VLDO2_3_0V | | |
358 | TPS_LDO1_ENABLE | TPS_VLDO1_3_0V); | |
359 | ||
360 | return 0; | |
361 | } | |
362 | ||
363 | static struct tps65010_board tps_board = { | |
364 | .base = H2_TPS_GPIO_BASE, | |
365 | .outmask = 0x0f, | |
366 | .setup = tps_setup, | |
367 | }; | |
368 | ||
e27a93a9 TL |
369 | static struct i2c_board_info __initdata h2_i2c_board_info[] = { |
370 | { | |
9221bb1c | 371 | I2C_BOARD_INFO("tps65010", 0x48), |
d8874665 | 372 | .platform_data = &tps_board, |
9221bb1c | 373 | }, { |
e27a93a9 | 374 | I2C_BOARD_INFO("isp1301_omap", 0x2d), |
e27a93a9 TL |
375 | }, |
376 | }; | |
377 | ||
1da177e4 LT |
378 | static struct omap_usb_config h2_usb_config __initdata = { |
379 | /* usb1 has a Mini-AB port and external isp1301 transceiver */ | |
380 | .otg = 2, | |
381 | ||
d6a0d048 | 382 | #if IS_ENABLED(CONFIG_USB_OMAP) |
6e2d4107 DC |
383 | .hmc_mode = 19, /* 0:host(off) 1:dev|otg 2:disabled */ |
384 | /* .hmc_mode = 21,*/ /* 0:host(off) 1:dev(loopback) 2:host(loopback) */ | |
1da177e4 LT |
385 | #elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) |
386 | /* needs OTG cable, or NONSTANDARD (B-to-MiniB) */ | |
6e2d4107 | 387 | .hmc_mode = 20, /* 1:dev|otg(off) 1:host 2:disabled */ |
1da177e4 LT |
388 | #endif |
389 | ||
390 | .pins[1] = 3, | |
391 | }; | |
392 | ||
3179a019 | 393 | static struct omap_lcd_config h2_lcd_config __initdata = { |
3179a019 TL |
394 | .ctrl_name = "internal", |
395 | }; | |
396 | ||
1da177e4 LT |
397 | static void __init h2_init(void) |
398 | { | |
c2cdaffe TL |
399 | h2_init_smc91x(); |
400 | ||
9b6553cd TL |
401 | /* Here we assume the NOR boot config: NOR on CS3 (possibly swapped |
402 | * to address 0 by a dip switch), NAND on CS2B. The NAND driver will | |
403 | * notice whether a NAND chip is enabled at probe time. | |
404 | * | |
405 | * FIXME revC boards (and H3) support NAND-boot, with a dip switch to | |
406 | * put NOR on CS2B and NAND (which on H2 may be 16bit) on CS3. Try | |
407 | * detecting that in code here, to avoid probing every possible flash | |
408 | * configuration... | |
7c38cf02 | 409 | */ |
9b6553cd TL |
410 | h2_nor_resource.end = h2_nor_resource.start = omap_cs3_phys(); |
411 | h2_nor_resource.end += SZ_32M - 1; | |
412 | ||
a524626b TL |
413 | h2_nand_resource.end = h2_nand_resource.start = OMAP_CS2B_PHYS; |
414 | h2_nand_resource.end += SZ_4K - 1; | |
0449410b | 415 | BUG_ON(gpio_request(H2_NAND_RB_GPIO_PIN, "NAND ready") < 0); |
f2d18fea | 416 | gpio_direction_input(H2_NAND_RB_GPIO_PIN); |
a524626b | 417 | |
9b6553cd TL |
418 | omap_cfg_reg(L3_1610_FLASH_CS2B_OE); |
419 | omap_cfg_reg(M8_1610_FLASH_CS2B_WE); | |
7c38cf02 TL |
420 | |
421 | /* MMC: card detect and WP */ | |
6e2d4107 | 422 | /* omap_cfg_reg(U19_ARMIO1); */ /* CD */ |
7c38cf02 TL |
423 | omap_cfg_reg(BALLOUT_V8_ARMIO3); /* WP */ |
424 | ||
93c43f25 TL |
425 | /* Mux pins for keypad */ |
426 | omap_cfg_reg(F18_1610_KBC0); | |
427 | omap_cfg_reg(D20_1610_KBC1); | |
428 | omap_cfg_reg(D19_1610_KBC2); | |
429 | omap_cfg_reg(E18_1610_KBC3); | |
430 | omap_cfg_reg(C21_1610_KBC4); | |
431 | omap_cfg_reg(G18_1610_KBR0); | |
432 | omap_cfg_reg(F19_1610_KBR1); | |
433 | omap_cfg_reg(H14_1610_KBR2); | |
434 | omap_cfg_reg(E20_1610_KBR3); | |
435 | omap_cfg_reg(E19_1610_KBR4); | |
436 | omap_cfg_reg(N19_1610_KBR5); | |
437 | ||
dafbeadf BW |
438 | /* GPIO based LEDs */ |
439 | omap_cfg_reg(P18_1610_GPIO3); | |
440 | omap_cfg_reg(MPUIO4); | |
441 | ||
46a0a540 TKD |
442 | h2_smc91x_resources[1].start = gpio_to_irq(0); |
443 | h2_smc91x_resources[1].end = gpio_to_irq(0); | |
1da177e4 | 444 | platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices)); |
3179a019 | 445 | omap_serial_init(); |
46a0a540 TKD |
446 | h2_i2c_board_info[0].irq = gpio_to_irq(58); |
447 | h2_i2c_board_info[1].irq = gpio_to_irq(2); | |
1ed16a86 JN |
448 | omap_register_i2c_bus(1, 100, h2_i2c_board_info, |
449 | ARRAY_SIZE(h2_i2c_board_info)); | |
dd0cdd88 | 450 | omap1_usb_init(&h2_usb_config); |
138ab9f8 | 451 | h2_mmc_init(); |
ddba6c7f TV |
452 | |
453 | omapfb_set_lcd_config(&h2_lcd_config); | |
1da177e4 LT |
454 | } |
455 | ||
1da177e4 | 456 | MACHINE_START(OMAP_H2, "TI-H2") |
e9dea0c6 | 457 | /* Maintainer: Imre Deak <imre.deak@nokia.com> */ |
246e389d | 458 | .atag_offset = 0x100, |
7b88e62f TL |
459 | .map_io = omap16xx_map_io, |
460 | .init_early = omap1_init_early, | |
7b88e62f | 461 | .init_irq = omap1_init_irq, |
e9dea0c6 | 462 | .init_machine = h2_init, |
82c3bd03 | 463 | .init_late = omap1_init_late, |
6bb27d73 | 464 | .init_time = omap1_timer_init, |
baa95883 | 465 | .restart = omap1_restart, |
1da177e4 | 466 | MACHINE_END |