projects / GitHub / mt8127 / android_kernel_alcatel_ttab.git / blame
| Commit | Line | Data |
|---|---|---|
| fe7ca2e1 BH |
1 | |
| 2 | Options for the ipv6 module are supplied as parameters at load time. | |
| 3 | ||
| 4 | Module options may be given as command line arguments to the insmod | |
| 970e2486 LDM |
5 | or modprobe command, but are usually specified in either |
| 6 | /etc/modules.d/*.conf configuration files, or in a distro-specific | |
| 7 | configuration file. | |
| fe7ca2e1 BH |
8 | |
| 9 | The available ipv6 module parameters are listed below. If a parameter | |
| 10 | is not specified the default value is used. | |
| 11 | ||
| 12 | The parameters are as follows: | |
| 13 | ||
| 14 | disable | |
| 15 | ||
| 16 | Specifies whether to load the IPv6 module, but disable all | |
| 17 | its functionality. This might be used when another module | |
| 18 | has a dependency on the IPv6 module being loaded, but no | |
| 19 | IPv6 addresses or operations are desired. | |
| 20 | ||
| 21 | The possible values and their effects are: | |
| 22 | ||
| 23 | 0 | |
| 24 | IPv6 is enabled. | |
| 25 | ||
| 26 | This is the default value. | |
| 27 | ||
| 28 | 1 | |
| 29 | IPv6 is disabled. | |
| 30 | ||
| 31 | No IPv6 addresses will be added to interfaces, and | |
| 32 | it will not be possible to open an IPv6 socket. | |
| 33 | ||
| 34 | A reboot is required to enable IPv6. | |
| 35 | ||
| 56d417b1 BH |
36 | autoconf |
| 37 | ||
| 38 | Specifies whether to enable IPv6 address autoconfiguration | |
| 39 | on all interfaces. This might be used when one does not wish | |
| 40 | for addresses to be automatically generated from prefixes | |
| 41 | received in Router Advertisements. | |
| 42 | ||
| 43 | The possible values and their effects are: | |
| 44 | ||
| 45 | 0 | |
| 46 | IPv6 address autoconfiguration is disabled on all interfaces. | |
| 47 | ||
| 48 | Only the IPv6 loopback address (::1) and link-local addresses | |
| 49 | will be added to interfaces. | |
| 50 | ||
| 51 | 1 | |
| 52 | IPv6 address autoconfiguration is enabled on all interfaces. | |
| 53 | ||
| 54 | This is the default value. | |
| 55 | ||
| 56 | disable_ipv6 | |
| 57 | ||
| 58 | Specifies whether to disable IPv6 on all interfaces. | |
| 59 | This might be used when no IPv6 addresses are desired. | |
| 60 | ||
| 61 | The possible values and their effects are: | |
| 62 | ||
| 63 | 0 | |
| 64 | IPv6 is enabled on all interfaces. | |
| 65 | ||
| 66 | This is the default value. | |
| 67 | ||
| 68 | 1 | |
| 69 | IPv6 is disabled on all interfaces. | |
| 70 | ||
| 71 | No IPv6 addresses will be added to interfaces. | |
| 72 |