[GitHub/LineageOS/android_device_samsung_universal7580-common.git] / include / samsung_audio.h

/*
 * Copyright (C) 2017 The LineageOS Project
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#include <telephony/ril.h>

#ifndef SAMSUNG_AUDIO_H
#define SAMSUNG_AUDIO_H

#define MIXER_CARD 0
#define SOUND_CARD 0

/* Playback */
#define SOUND_DEEP_BUFFER_DEVICE 1
#define SOUND_PLAYBACK_DEVICE 5
#define SOUND_PLAYBACK_SCO_DEVICE 3

/* Capture */
#define SOUND_CAPTURE_DEVICE 0
#define SOUND_CAPTURE_SCO_DEVICE 3

/* Voice calls */
#define SOUND_PLAYBACK_VOICE_DEVICE 2
#define SOUND_CAPTURE_VOICE_DEVICE 2

/* Wideband AMR callback */
#ifndef RIL_UNSOL_SNDMGR_WB_AMR_REPORT
#ifdef RIL_UNSOL_WB_AMR_STATE
#define RIL_UNSOL_SNDMGR_WB_AMR_REPORT RIL_UNSOL_WB_AMR_STATE
#else
#define RIL_UNSOL_SNDMGR_WB_AMR_REPORT 0
#endif
#endif

/* Unusupported
#define SOUND_CAPTURE_LOOPBACK_AEC_DEVICE 1
#define SOUND_CAPTURE_HOTWORD_DEVICE 0
*/

/*
 * If the device has stereo speakers and the speakers are arranged on
 * different sides of the device you can activate this feature by
 * setting it to 1.
 */
#define SWAP_SPEAKER_ON_SCREEN_ROTATION 0

/*
 * You can that this to 1 if your kernel supports irq affinity for
 * fast mode. See /proc/asound/irq_affinity
 */
#define SUPPORTS_IRQ_AFFINITY 0

/*
 * The Wolfson/Cirruslogic chips need to shutdown the DAPM route completely
 * to be able to load a new firmware. Some of these chips need a delay after
 * shutodown to full poweroff the DSPs.
 *
 * A good value to start with is 10ms:
 *
 * #define DSP_POWEROFF_DELAY 10 * 1000
 */
/* #define DSP_POWEROFF_DELAY 0 */

/*
 * Some device variants (often T-Mobile) have a separate voice processing IC
 * (Audience EarSmart xxx).
 * This hooks into the voice call session and enables, configures and disables
 * this extra firmware so RX/TX streams can be routed by the driver.
 */
/* #define AUDIENCE_EARSMART_IC */

#endif // SAMSUNG_AUDIO_H
Commit	Line	Data
ff6ea31f S	1	/*
	2	* Copyright (C) 2017 The LineageOS Project
	3	*
	4	* Licensed under the Apache License, Version 2.0 (the "License");
	5	* you may not use this file except in compliance with the License.
	6	* You may obtain a copy of the License at
	7	*
	8	* http://www.apache.org/licenses/LICENSE-2.0
	9	*
	10	* Unless required by applicable law or agreed to in writing, software
	11	* distributed under the License is distributed on an "AS IS" BASIS,
	12	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	13	* See the License for the specific language governing permissions and
	14	* limitations under the License.
	15	*/
	16
	17	#include <telephony/ril.h>
	18
	19	#ifndef SAMSUNG_AUDIO_H
	20	#define SAMSUNG_AUDIO_H
	21
	22	#define MIXER_CARD 0
	23	#define SOUND_CARD 0
	24
	25	/* Playback */
	26	#define SOUND_DEEP_BUFFER_DEVICE 1
	27	#define SOUND_PLAYBACK_DEVICE 5
	28	#define SOUND_PLAYBACK_SCO_DEVICE 3
	29
	30	/* Capture */
	31	#define SOUND_CAPTURE_DEVICE 0
	32	#define SOUND_CAPTURE_SCO_DEVICE 3
	33
	34	/* Voice calls */
	35	#define SOUND_PLAYBACK_VOICE_DEVICE 2
	36	#define SOUND_CAPTURE_VOICE_DEVICE 2
	37
	38	/* Wideband AMR callback */
	39	#ifndef RIL_UNSOL_SNDMGR_WB_AMR_REPORT
	40	#ifdef RIL_UNSOL_WB_AMR_STATE
	41	#define RIL_UNSOL_SNDMGR_WB_AMR_REPORT RIL_UNSOL_WB_AMR_STATE
	42	#else
	43	#define RIL_UNSOL_SNDMGR_WB_AMR_REPORT 0
	44	#endif
	45	#endif
	46
	47	/* Unusupported
	48	#define SOUND_CAPTURE_LOOPBACK_AEC_DEVICE 1
	49	#define SOUND_CAPTURE_HOTWORD_DEVICE 0
	50	*/
	51
	52	/*
	53	* If the device has stereo speakers and the speakers are arranged on
	54	* different sides of the device you can activate this feature by
	55	* setting it to 1.
	56	*/
	57	#define SWAP_SPEAKER_ON_SCREEN_ROTATION 0
	58
	59	/*
	60	* You can that this to 1 if your kernel supports irq affinity for
	61	* fast mode. See /proc/asound/irq_affinity
	62	*/
	63	#define SUPPORTS_IRQ_AFFINITY 0
	64
65	/*
66	* The Wolfson/Cirruslogic chips need to shutdown the DAPM route completely
67	* to be able to load a new firmware. Some of these chips need a delay after
68	* shutodown to full poweroff the DSPs.
69	*
70	* A good value to start with is 10ms:
71	*
72	* #define DSP_POWEROFF_DELAY 10 * 1000
73	*/
74	/* #define DSP_POWEROFF_DELAY 0 */
75
76	/*
77	* Some device variants (often T-Mobile) have a separate voice processing IC
78	* (Audience EarSmart xxx).
79	* This hooks into the voice call session and enables, configures and disables
80	* this extra firmware so RX/TX streams can be routed by the driver.
81	*/
82	/* #define AUDIENCE_EARSMART_IC */
83
84	#endif // SAMSUNG_AUDIO_H