GitHub/moto-9609/android_kernel_motorola_exynos9610.git
Author Commit
2019-11-05 zhangjiaquanMODAP-10860:[Kane][kernel]:Audio loss issue during...
2019-11-05 zhangyijie(CR)[Kane]:[kernel]motor update driver code(1/1)
2019-11-05 Wooyeon Kim[9610][ROBUSTA2] dts: camera: add dual sync mode for...
2019-11-05 Wooyeon Kim[COMMON] dt_binding: camera: add dual sync mode define
2019-11-05 Junhan Bae[9610] drivers : fix try snk problem
2019-11-05 hq_qiaoquanbin_tmp(CR):[Kane]:[factory] [2/2] tp:fix ESD recovery and...
2019-11-05 Boyoungchub: increase chub fw error threshold
2019-11-05 hq_qiaoquanbin_tmp(CR):[Kane]:[factory] tp:fix selftest result save to...
2019-11-05 zhangyijie(CR)[Kane]:kernel:motor add short vibrate(2/2)
2019-11-05 sanghwan park[RAMEN9610-9177][9610] defconfig: Add vipx
2019-11-05 hskang[RAMEN9610-9150][Robusta2] Enable CONFIG_NETFILTER_XT_M...
2019-11-05 ChiHun Won[RAMEN9610-9075] arm64: config: enabled dqe feature
2019-11-05 hwangjae lee[Robusta2] fbdev: dpu: unnecessary sequence is removed
2019-11-05 hq_qiaoquanbin_tmpMerge "(CR):[kane]:tp:Modify the charger change tp...
2019-11-05 wangjiao(CR):[Kane]:[factory]Add Second lcd esd recovery function
2019-11-05 wangdw10[COMMON] fimc-is2: Add AWB limit check for 2X5SP
2019-11-05 baitong(CR):[Kane]:FPS:Add fingerprint navigation
2019-11-05 Wooyeon Kim[COMMON] fimc-is2: sync cis_ext2 sensor interface
2019-11-05 wangjiao(CR):[Kane]:[factory]Modify lcd suspend write faill...
2019-11-05 hq_qiaoquanbin_tmp(CR):[1/3] Merge "[Robusta2] tp: add tianma secondary...
2019-11-05 xiongzuan_w(CR):[kane]:thermal:Modify the charger_temp temperature...
2019-11-05 wangjiao(CR):[Kane]:[factory]Modify lcd mipi timing value
2019-11-05 zhangjiaquan(CR):[Kane]kernel:update firmware name to keep same...
2019-11-05 libm1[9610] defconfig: Add OIS configs
2019-11-05 wangjiao(CR):[Kane]:[factory]Modify lcd R51/R55 reg
2019-11-05 libm1[9610] dtsi: Add a GM1SP ois node
2019-11-05 dan huh[9610] dtsi: Add a use_otp_cal value for 2x5 sensor
2019-11-05 dan huh[COMMON] defconfig: Add a 5E9 configs
2019-11-05 dan huh[9610] dtsi: Add a 5E9 eeprom node
2019-11-05 dan huh[9610] defconfig: Add EEPROM configs
2019-11-05 dan huh[9610] dtsi: Add a eeprom node for i2c and name
2019-11-05 wangdw10[COMMON] fimc-is2: add sensor g_mode log for debug
2019-11-05 wangjiao(CR):[Kane]:[factory]Add lcd esd recovery function
2019-11-05 baitong(CR):[Kane]:FPS:modify fingerprint can not wake up...
2019-11-05 zhangyijie(CR)[Kane]:kernel:motor add short vibrate(1/2)
2019-11-05 wangjiao(CR):[Kane]:[factory]Modfiy tm lcd id order
2019-11-05 Youngmin Nam[9610] arm64: dts: separate dts and dtsi of SoC
2019-11-05 wangjiao(CR):[Kane]:[factory]add tm second lcd driver
2019-11-05 Youngmin Nam[9610][EVB] arm64: dts: seperate specific board dts...
2019-11-05 Junhan BaeBSP : add CCIC TRY SNK FUNCTION
2019-11-05 Junhan BaeBSP : add patch to check ccic irq
2019-11-05 hwangjae lee[Robusta2] arm64: configs: CONFIG_PANEL_INIT_LPDT is...
2019-11-05 hwangjae lee[Robusta2] fbdev: dpu: command is written in LPDT mode
2019-11-05 yanfei(CR):[kane][kernel]:Modify Capsensor interrupt function
2019-11-05 zhangjiaquan(CR):[Kane]audio:update audio-parameter-for cs-11-19
2019-11-05 Wooyeon Kim[COMMON] fimc-is2: add function for dw9839 actuator...
2019-11-05 hq_guohongtao5_tmp(CR):[factory]:[kane]:kernel:modify usb serialno
2019-11-05 liuguangchao(CR):[Kane]:sdcard:remove uhs in dtsi deal with class10...
2019-11-05 zhangyijie(CR):[Kane]:dts:TP midified i2c CLK (1/1)
2019-11-05 ts_songwei1113_tmpkernel:dts change rear aux sensor 5e9 setfile from...
2019-11-05 Youngsoo[9610] wlbt: update platform config for robusta2_dualfem
2019-11-05 hq_qiaoquanbin_tmp(CR):[1/2] Merge "[Robusta2] tp: change firmware and...
2019-11-05 xingbin(CR):[Kane]:add backlight i2c device for high light...
2019-11-05 xuke(CR) [Kane]:kernel:modify ntc thermistor and add charge...
2019-11-05 Charles KeepaxASoC: madera: Fix virtual input mux
2019-11-05 Wooyeon Kim[9610][Robusta2] dts: camera: modify settings for apply...
2019-11-05 hq_guohongtao5_tmpRevert "(CR):[factory]:[kane]:kernel: use trackid as...
2019-11-05 hq_guohongtao5_tmpRevert "(CR):[factory]:[kane]:defconfig: use trackid...
2019-11-05 zhangjiaquan(CR):[Kane]kernel: match micbias ext-cap name
2019-11-05 yanfei(CR):[kane]:[kernel]: modify for capsensor Channel
2019-11-05 hwangjae lee[Robusta2] fbdev: dpu20: panel: max_brightness constrai...
2019-11-05 ts_songwei1113_tmpchange iic div calculation formula for frquency not...
2019-11-05 zhangjiaquan(CR):[Kane]kernel:change codec firmware loading solution
2019-11-05 Junhan Bae[9609][EVB] drivers: add ccic usb connector direction...
2019-11-05 hq_qiaoquanbin_tmpMerge "(CR):[Kane]kernel:add frimware upgrade status...
2019-11-05 xuke(CR):[Kane]:kernel:modify charger policy
2019-11-05 hq_guohongtao5_tmp(CR):[factory]:[kane]:defconfig: use trackid as adb...
2019-11-05 hq_guohongtao5_tmp(CR):[factory]:[kane]:kernel: use trackid as adb device...
2019-11-05 zhangjiaquan(CR):[Kane][factory]kernel:calibrate spk of aac and...
2019-11-05 Boyoungchub : added os selection option on device tree
2019-11-05 wangjiao(CR):[Kane]:[factory]Modify the tm lcd power on/off...
2019-11-05 Wooyeon Kim[9610][EVB] arm64: defconfig: add defconfig for dw9839...
2019-11-05 Wooyeon Kim[9610][EVB] dts: camera: add dw9839 actuator dts
2019-11-05 Wooyeon Kim[9610] arm64: dts: remove always-on flag for LDO38...
2019-11-05 ShinHyung[9609][EVB] dts: Added PA-reset gpio configuration...
2019-11-05 yanfei(CR):[kane]:[kernel]: modify for capsensor power
2019-11-05 liuqiangenable CONFIG_MODEM_IF_ADAPTIVE_QOS in robusta2_evb_def...
2019-11-05 xiongzuan_w(CR):[kane]:thermal:Add thermal io-channels config
2019-11-05 hq_qiaoquanbin_tmp(CR):[Kane]:[factory]add second supplier himax TP driver.
2019-11-05 wangjiao(CR):[Kane]:[factory]tm lcd adjust brightness
2019-11-05 kiwoo Kwon[9610] dts: to add again i2c max bus freq for nfc
2019-11-05 wangjiao(CR):[Kane]:[factory]add tm lcd driver
2019-11-05 yanfei(CR):[kane]:kernel:add Capsensor calibrate value node
2019-11-05 xingbin(CR):[Kane]:[factory]tcmd:solve the black issue after...
2019-11-05 baitong(CR):[Kane]:[factory]utags:add utags related kernel...
2019-11-05 yanfei(CR):[kane]:kernel:add Capsensor calibrate value node
2019-11-05 wangjiao(CR):[Kane]:[factory]add default lcd driver
2019-11-05 ShinHyung[9609][EVB] audio: The SPK ID is moved to the machine...
2019-11-05 huaqin13(CR):[Kane]:[factory]utags:add utags related kernel...
2019-11-05 wangjiao(CR):[Kane]:[factory]tcmd:add lcd vendor id node function
2019-11-05 Jiyoung Jeongarch: config: enable HW_REV_DETECT for getting board...
2019-11-05 Jiyoung Jeongdrivers: modem_if: Get board revision using bootargs
2019-11-05 Wooyeon Kim[9610][EVB] arm64: defconfig: add flash_s2mu106 defconf...
2019-11-05 Wooyeon Kim[9610][EVB] dtsi: camera: add Flash nodes
2019-11-05 xingbin(CR):[Kane]:[factory]tcmd:add lcd disp_util function
2019-11-05 hwangjae lee[9610] fbdev: dpu: default brightness valofr NT36672A...
2019-11-05 xingbin(CR):[Kane]:[factory]tcmd:add lcd disp_util function
2019-11-05 zhangjiaquan(CR):[Kane]kernel:change madera ADSP interrupts type
2019-11-05 zhangyijie(CR):[Kane]:kernel:vibrator enable LPF (1/1)
2019-11-05 zhangyijie(CR):[Kane]:dts:vibrator adjust i2c clk(1/1)
next