GitHub/moto-9609/android_kernel_motorola_exynos9610.git
Author Commit
2019-11-05 hq_qiaoquanbin_tmp(CR):[1/2] Merge "[Robusta2] tp: change firmware and...
2019-11-05 xingbin(CR):[Kane]:add backlight i2c device for high light...
2019-11-05 xuke(CR) [Kane]:kernel:modify ntc thermistor and add charge...
2019-11-05 Charles KeepaxASoC: madera: Fix virtual input mux
2019-11-05 Wooyeon Kim[9610][Robusta2] dts: camera: modify settings for apply...
2019-11-05 hq_guohongtao5_tmpRevert "(CR):[factory]:[kane]:kernel: use trackid as...
2019-11-05 hq_guohongtao5_tmpRevert "(CR):[factory]:[kane]:defconfig: use trackid...
2019-11-05 zhangjiaquan(CR):[Kane]kernel: match micbias ext-cap name
2019-11-05 yanfei(CR):[kane]:[kernel]: modify for capsensor Channel
2019-11-05 hwangjae lee[Robusta2] fbdev: dpu20: panel: max_brightness constrai...
2019-11-05 ts_songwei1113_tmpchange iic div calculation formula for frquency not...
2019-11-05 zhangjiaquan(CR):[Kane]kernel:change codec firmware loading solution
2019-11-05 Junhan Bae[9609][EVB] drivers: add ccic usb connector direction...
2019-11-05 hq_qiaoquanbin_tmpMerge "(CR):[Kane]kernel:add frimware upgrade status...
2019-11-05 xuke(CR):[Kane]:kernel:modify charger policy
2019-11-05 hq_guohongtao5_tmp(CR):[factory]:[kane]:defconfig: use trackid as adb...
2019-11-05 hq_guohongtao5_tmp(CR):[factory]:[kane]:kernel: use trackid as adb device...
2019-11-05 zhangjiaquan(CR):[Kane][factory]kernel:calibrate spk of aac and...
2019-11-05 Boyoungchub : added os selection option on device tree
2019-11-05 wangjiao(CR):[Kane]:[factory]Modify the tm lcd power on/off...
2019-11-05 Wooyeon Kim[9610][EVB] arm64: defconfig: add defconfig for dw9839...
2019-11-05 Wooyeon Kim[9610][EVB] dts: camera: add dw9839 actuator dts
2019-11-05 Wooyeon Kim[9610] arm64: dts: remove always-on flag for LDO38...
2019-11-05 ShinHyung[9609][EVB] dts: Added PA-reset gpio configuration...
2019-11-05 yanfei(CR):[kane]:[kernel]: modify for capsensor power
2019-11-05 liuqiangenable CONFIG_MODEM_IF_ADAPTIVE_QOS in robusta2_evb_def...
2019-11-05 xiongzuan_w(CR):[kane]:thermal:Add thermal io-channels config
2019-11-05 hq_qiaoquanbin_tmp(CR):[Kane]:[factory]add second supplier himax TP driver.
2019-11-05 wangjiao(CR):[Kane]:[factory]tm lcd adjust brightness
2019-11-05 kiwoo Kwon[9610] dts: to add again i2c max bus freq for nfc
2019-11-05 wangjiao(CR):[Kane]:[factory]add tm lcd driver
2019-11-05 yanfei(CR):[kane]:kernel:add Capsensor calibrate value node
2019-11-05 xingbin(CR):[Kane]:[factory]tcmd:solve the black issue after...
2019-11-05 baitong(CR):[Kane]:[factory]utags:add utags related kernel...
2019-11-05 yanfei(CR):[kane]:kernel:add Capsensor calibrate value node
2019-11-05 wangjiao(CR):[Kane]:[factory]add default lcd driver
2019-11-05 ShinHyung[9609][EVB] audio: The SPK ID is moved to the machine...
2019-11-05 huaqin13(CR):[Kane]:[factory]utags:add utags related kernel...
2019-11-05 wangjiao(CR):[Kane]:[factory]tcmd:add lcd vendor id node function
2019-11-05 Jiyoung Jeongarch: config: enable HW_REV_DETECT for getting board...
2019-11-05 Jiyoung Jeongdrivers: modem_if: Get board revision using bootargs
2019-11-05 Wooyeon Kim[9610][EVB] arm64: defconfig: add flash_s2mu106 defconf...
2019-11-05 Wooyeon Kim[9610][EVB] dtsi: camera: add Flash nodes
2019-11-05 xingbin(CR):[Kane]:[factory]tcmd:add lcd disp_util function
2019-11-05 hwangjae lee[9610] fbdev: dpu: default brightness valofr NT36672A...
2019-11-05 xingbin(CR):[Kane]:[factory]tcmd:add lcd disp_util function
2019-11-05 zhangjiaquan(CR):[Kane]kernel:change madera ADSP interrupts type
2019-11-05 zhangyijie(CR):[Kane]:kernel:vibrator enable LPF (1/1)
2019-11-05 zhangyijie(CR):[Kane]:dts:vibrator adjust i2c clk(1/1)
2019-11-05 Sangwook Ju[9610] arm64: configs: MULTI panel support feature...
2019-11-05 Sangwook Ju[9610] fbdev: dpu: code bug fix
2019-11-05 zhangyijie(CR):[Kane]:kernel: vibrator modify for haptic(1/3)
2019-11-05 yanfei(CR):[kane]:kernel:add cap sensor driver
2019-11-05 Sangwook Ju[Robusta2] arm64:dts: Adjust LDO40 output voltage to...
2019-11-05 hwangjae lee[9609] arm64: configs: PWM_BACKLIGHT is disabled
2019-11-05 hwangjae lee[9609] arm64: config: enabled panel cabc feature
2019-11-05 hwangjae lee[9609] fbdev: panel: added sysfs for supporting CABC...
2019-11-05 hwangjae leeRevert "BSP: NT36672A cabc mode control is added"
2019-11-05 hwangjae leeRevert "BSP: NT36672A cabc mode config is added"
2019-11-05 Boyoung[9610] arm64: dts: remove gpip pin
2019-11-05 Wooyeon Kim[9610][EVB] dts: camera: add camera dtsi for robusta2
2019-11-05 samsung3[HACK] fimc-is2: change codes for robusta2
2019-11-05 Wooyeon Kim[9610][EVB] dts: camera: update evb dts file for camera
2019-11-05 Wooyeon Kim[9610][EVB] arm64: defconfig: add FIMC-IS config
2019-11-05 shihuijun (CR):[9610][EVB] motor: bring up aw8695 motor conctrlo...
2019-11-05 shihuijun (CR):[9610][EVB] motor: bring up aw8695 motor conctrlo...
2019-11-05 shihuijun(CR):[9610][EVB] motor: bring up aw8695 motor conctrlor...
2019-11-05 hq_guohongtao5_tmp(CR):[kane]:kernel:add egis fps
2019-11-05 hq_guohongtao5_tmp[9610][EVB] dts: remove unused audio properies
2019-11-05 Keunho HwangBSP: IFPMIC RGB LED driver
2019-11-05 hq_guohongtao5_tmp[9610][EVB] arm64: dts: added cirrus dsp firmware
2019-11-05 hq_guohongtao5_tmp[9610][EVB] arm64: dts: enabled speaker amp
2019-11-05 hq_guohongtao5_tmp[9610][EVB] madera: support Aov driver update
2019-11-05 hq_guohongtao5_tmp[9610][EVB] CS35L41: update hw parameters setting for...
2019-11-05 hq_guohongtao5_tmp[9610][EVB] CS35L41: update the smart Pa driver to...
2019-11-05 hq_guohongtao5_tmp[9610][EVB] Support online tune with Cirrus tools
2019-11-05 Youngmin Nam[9610][EVB] arm64: dts: add exynos9609-robusta2_evb.dts
2019-11-05 Youngmin Nam[9610][EVB] arm64: configs: add robusta2_evb_defconfig
2019-11-05 liuqiangfix bootup issue after rebase
2019-11-05 hq_guohongtao5_tmp(CR):[kane]:kernel: add egis fps drivers
2019-11-05 hq_guohongtao5_tmp(CR):[kane]:kernel: add sar sensor sx9325 drivers
2019-11-05 hq_guohongtao5_tmp(CR):[kane]:dts: add sar sensor sx9325 drivers
2019-11-05 hq_guohongtao5_tmp(CR):[kane]:configs: add sensor class drivers
2019-11-05 hq_guohongtao5_tmp(CR):[kane]:kernel: add sensor class drivers
2019-11-05 liuqiangfix build errors after rebase samsung/exynos9609 branch
2019-11-05 kiwoo Kwon[9609][WING] arm64: configs: run savedefconfig for nfc
2019-11-05 kiwoo Kwon[9609][WING] arm64: dts: add nfc driver
2019-11-05 Boojin Kim[9610][ERD] dtsi: chub: add wing board dt
2019-11-05 Youngmin Nam[9609][WING] sensor: sar: fix build error by unused...
2019-11-05 hq_guohongtao5_tmpsensor: add sar sensor drivers
2019-11-05 Youngmin Nam[9610][WING] arm64: dts: enable AVB, ro.arch, system...
2019-11-05 Youngmin Nam[9610][WING] arm64: dts: refactoring dts file
2019-11-05 Kyungwoo KangDocumentation: samsung: USI guide docs
2019-11-05 Youngmin Nam[9610][WING] arm64: configs: disable FIMC features
2019-11-05 Youngmin Nam[9610][WING] arm64: dts: remove ERD board dtbo config
2019-11-05 Youngmin Nam[9610] arm64: dts: create dtbo image
2019-11-05 Youngmin Nam[9610][WING] arm64: dts: enable dtbo overlay to make...
2019-11-05 lijilaiCS35L41: Disable Smart PA driver
2019-11-05 lijilaiCS35L41: Smart PA driver
2019-11-05 lijilaiabox: bring up the audio
next