GitHub/moto-9609/android_kernel_motorola_exynos9610.git
Author Commit
2010-04-16 Vasanthakumar... ath9k_hw: Fill get_isr() for AR9003
2010-04-16 Luis R. Rodriguezath9k_hw: add OFDM spur mitigation for AR9003
2010-04-16 Senthil Balasubramanianath9k_hw: Implement AR9003 eeprom callbacks
2010-04-16 Luis R. Rodriguezath9k_hw: restore mac address reading logic
2010-04-16 Luis R. Rodriguezath9k_hw: rename eep_AR9287_ops to eep_ar9287_ops
2010-04-16 Luis R. Rodriguezath9k_hw: complete AR9003 calibration
2010-04-16 Luis R. Rodriguezath9k_hw: fill in the callbacks for calibration for...
2010-04-16 Luis R. Rodriguezath9k_hw: abstract loading noisefloor
2010-04-16 Luis R. Rodriguezath9k_hw: abstract the AR_PHY_AGC_CONTROL register...
2010-04-16 Vasanthakumar... ath9k_hw: Initialize interrupt mask for AR9003
2010-04-16 Vasanthakumar... ath9k_hw: Abstract the routine which returns interrupt...
2010-04-16 Luis R. Rodriguezath9k_hw: move TX/RX gain INI stuff to its own hardware...
2010-04-16 Luis R. Rodriguezath9k_hw: move the cck channel 14 INI to the AR9002...
2010-04-16 Luis R. Rodriguezath9k_hw: split the generic hardware code by hardware...
2010-04-16 Luis R. Rodriguezath9k_hw: add the config_pci_powersave AR9003 callback
2010-04-16 Luis R. Rodriguezath9k_hw: add the AR9003 ar9003_hw_init_cal callback
2010-04-16 Luis R. Rodriguezath9k_hw: split calib code by hardware families
2010-04-16 Luis R. Rodriguezath9k_hw: move the cal AR9100 calibration settings
2010-04-16 Luis R. Rodriguezath9k_hw: rename getNoiseFloorThresh() to ath9k_hw_loadnf()
2010-04-16 Luis R. Rodriguezath9k_hw: rename the PA calib routines to match their...
2010-04-16 Luis R. Rodriguezath9k_hw: simplify OLC temp compensation for AR9002
2010-04-16 Luis R. Rodriguezath9k_hw: move the AR9280 OLC temp comp to its own...
2010-04-16 Luis R. Rodriguezath9k_hw: shift code for AR9280 OLC temp comp
2010-04-16 Luis R. Rodriguezath9k_hw: rename PA calib for AR9287
2010-04-16 Luis R. Rodriguezath9k_hw: add a helper for the OLC tem compensation...
2010-04-16 Luis R. Rodriguezath9k_hw: add a helper for Power Amplifier calibration...
2010-04-16 Senthil Balasubramanianath9k_hw: the eep_map is used only for AR9280 PCI card...
2010-04-16 Felix Fietkauath9k_hw: Split out the function for reading the noise...
2010-04-16 Felix Fietkauath9k: Add Rx EDMA support
2010-04-16 Vasanthakumar... ath9k: Make bf_desc of ath_buf opaque
2010-04-16 Vasanthakumar... ath9k: Remove ATH9K_TX_SW_ABORTED and introduce a bool...
2010-04-16 Vasanthakumar... ath9k: Use memcpy in ath_clone_txbuf()
2010-04-16 Vasanthakumar... ath9k: Use abstraction to get link pointer
2010-04-16 Vasanthakumar... ath9k_hw: Add abstraction to set/get link pointer
2010-04-16 Vasanthakumar... ath9k_hw: Move code which populates ds_data to ath9k_hw
2010-04-16 Vasanthakumar... ath9k_hw: Define tx control struct for AR9003
2010-04-16 Luis R. Rodriguezath9k_hw: add all the AR9003 PHY callbacks
2010-04-16 Felix Fietkauath9k_hw: Split off ANI control to the PHY ops
2010-04-16 Luis R. Rodriguezath9k_hw: add helpers for processing the AR9003 INI
2010-04-16 Luis R. Rodriguezath9k_hw: add initvals for the AR9003 hardware family
2010-04-16 Luis R. Rodriguezath9k_hw: split initvals.h by hardware family
2010-04-16 Felix Fietkauath9k_hw: Implement spur mitigation on AR9003
2010-04-16 Felix Fietkauath9k_hw: Implement PLL control on AR9003
2010-04-16 Felix Fietkauath9k_hw: Set the channel on AR9003
2010-04-16 Luis R. Rodriguezath9k_hw: add common channel select helpers for ar900[23]
2010-04-16 Felix Fietkauath9k_hw: Add AR9003 PHY register definitions
2010-04-16 Senthil Balasubramanianath9k_hw: prevent reset control register zeroing on...
2010-04-16 Senthil Balasubramanianath9k_hw: update the chip tests for AR9003
2010-04-16 Vasanthakumar... ath9k_hw: Add few routines for rx edma support
2010-04-16 Vasanthakumar... ath9k_hw: Fill rx_enable() for the AR9003 hardware...
2010-04-16 Vasanthakumar... ath9k_hw: Add abstraction for rx enable
2010-04-16 Vasanthakumar... ath9k_hw: Fill few hw cap for edma
2010-04-16 Vasanthakumar... ath9k_hw: Add hw cap flag for EDMA for the AR9003 family
2010-04-16 Luis R. Rodriguezath9k: disable the MIB interrupt if ANI is disabled
2010-04-16 Luis R. Rodriguezath9k_hw: disable ANI for AR9003
2010-04-16 Luis R. Rodriguezath9k_hw: add the AR9003 ar9003_hw_macversion_supported()
2010-04-16 Luis R. Rodriguezath9k_hw: move init config and default after chip is up
2010-04-16 Luis R. Rodriguezath9k_hw: Add AR9003 PHY support
2010-04-16 Senthil Balasubramanianath9k_hw: Add the PCI IDs for AR9300 and fill up the...
2010-04-16 Luis R. Rodriguezath9k_hw: add a private callback for PLL control comput...
2010-04-16 Luis R. Rodriguezath9k_hw: add some comments for ath9k_set_power_network...
2010-04-16 Luis R. Rodriguezath9k_hw: skip PLL initialization on AR9003 on Power...
2010-04-16 Luis R. Rodriguezath9k_hw: Move some RF ops to the private callbacks
2010-04-16 Luis R. Rodriguezath9k_hw: remove wrapper ath9k_hw_write_regs()
2010-04-16 Luis R. Rodriguezath9k_hw: AR9003 does not have AR_RC_AHB skip its setting
2010-04-16 Felix Fietkauath9k_hw: add support for GPIO differences on AR9003
2010-04-16 Felix Fietkauath9k_hw: add simple register abstraction for some...
2010-04-16 Felix Fietkauath9k_hw: fix a missing hex prefix for a register mask
2010-04-16 Felix Fietkauath9k_hw: add a macro for abstracting generic timer...
2010-04-16 Felix Fietkauath9k_hw: add silicon revision macros for AR9300
2010-04-16 Luis R. Rodriguezath9k_hw: start building an abstraction layer for hardw...
2010-04-16 Dan Williamslibertas: Davinci platforms need more time loading...
2010-04-16 Dan Williamslibertas: consolidate SDIO firmware wait code
2010-04-16 Larry Fingerrtl818x: Move configuration details to the rtl818x...
2010-04-16 Grazvydas Ignotaswl1251: register platform_device to pass board data
2010-04-16 Christian Lamparterp54pci: fix serious sparse warning
2010-04-16 Xose Vazquez... wireless: rt2x00: rt2800usb: identify Hawking devices
2010-04-16 Helmut Schaart2x00: rt2800pci: fix tx path by not accessing the...
2010-04-16 Helmut Schaart2x00: add txdesc parameter to write_tx_data
2010-04-16 Nishant Sarmukadamcfg80211: Avoid sending IWEVASSOCREQIE and IWEVASSOCRES...
2010-04-16 Grazvydas Ignotaswl1251: read default MAC address from EEPROM when available
2010-04-14 Xose Vazquez... wireless: rt2x00: rt2800usb: identify Sitecom devices
2010-04-14 Christian Lamparterar9170usb: add a couple more USB IDs
2010-04-14 Grazvydas Ignotaswl1251: don't require NVS data when EEPROM is used
2010-04-14 Ming Leiath9k-htc: fix lockdep warning and kernel warning after...
2010-04-14 Ming Leiath9k-htc:respect usb buffer cacheline alignment in...
2010-04-14 Ming Leiath9k-htc:respect usb buffer cacheline alignment in...
2010-04-14 Ming Leiath9k-htc:respect usb buffer cacheline alignment in...
2010-04-14 Bruno Randolfath5k: treat RXORN as non-fatal
2010-04-14 Bruno Randolfath5k: Use high bitrates for ACK/CTS
2010-04-12 Gertjan van... rt2x00: Add rt3390 support in rt2800 register initializ...
2010-04-12 Gertjan van... rt2x00: Add rt3090 support in rt2800 register initializ...
2010-04-12 Gertjan van... rt2x00: Add rt3071 support in rt2800 register initializ...
2010-04-12 Gertjan van... rt2x00: Finish rt3070 support in rt2800 register initia...
2010-04-12 Gertjan van... rt2x00: Align rt2800 register initialization with vendo...
2010-04-12 Gertjan van... rt2x00: Refactor rt2800 version constants.
2010-04-12 Gertjan van... rt2x00: Align RT chipset definitions with vendor driver.
2010-04-12 Gertjan van... rt2x00: Update rt2800 register definitions towards...
2010-04-12 Gertjan van... rt2x00: Let RF chipset decide the RF channel switch...
2010-04-12 Quintin Pittsp54pci: prevent stuck rx-ring on slow system
next