GitHub/LineageOS/G12/android_kernel_amlogic_linux-4.9.git
Author Commit
2014-05-16 Sascha HauerARM: dts: Karo TX25: use hardware ecc
2014-05-16 Sascha HauerARM: dts: Karo TX25: Add phy reset gpio and supply...
2014-05-16 Sascha HauerARM: dts: Karo TX25: Add pinctrl nodes
2014-05-16 Sascha HauerARM: dts: i.MX25: Add IRAM node
2014-05-16 Sascha HauerARM: dts: i.MX25: Add mmc aliases
2014-05-16 Sascha HauerARM: dts: i.MX51 babbage: Fix FEC pad ctrl settings
2014-05-16 Fabio EstevamARM: dts: imx6qdl-sabresd: Add USDHC4 support
2014-05-16 Russell KingARM: imx: add HDMI support for SolidRun HummingBoard...
2014-05-16 Lucas StachARM: dts: imx6: edmqmx6: add SPI bus and flash
2014-05-16 Lucas StachARM: dts: imx6: edmqmx6: add pinctrl for pfuze irq...
2014-05-16 Fabio EstevamARM: dts: imx6q-udoo: Add HDMI support
2014-05-16 Sascha HauerARM: dts: Add stdout-path property to i.MX boards
2014-05-16 Tim HarveyARM: dts: imx: Fix LVDS mapping for Ventana GW52xx
2014-05-16 Tim HarveyARM: dts: imx: add LVDS backlight for Ventana
2014-05-16 Lucas StachARM: dts: imx6qdl-sabresd: remove power-on gpio from...
2014-05-16 Lucas StachARM: dts: imx6: update pcie to bring in line with new...
2014-05-16 Fabio EstevamARM: dts: imx53-qsb-common: Add TVE support
2014-05-16 Alexander ShiyanARM: dts: imx27-phytec-phycore-rdk: Fix "reg" property...
2014-05-16 Alexander ShiyanARM: dts: imx27-phytec-phycore-rdk: Add CSI enable...
2014-05-16 Alexander ShiyanARM: dts: imx: Remove excess entries for PMIC
2014-05-16 Alexander ShiyanARM: dts: imx27-phytec-phycore-som: Disable PM pins...
2014-05-16 Alexander ShiyanARM: dts: imx27-phytec-phycore-som: Fix active level...
2014-05-16 Alexander ShiyanARM: dts: imx27-phytec-phycore-rdk: Remove duplicate...
2014-05-16 Tim HarveyARM: dts: ventana: Add HDMI support
2014-05-16 Marek VasutARM: dts: imx6qdl-sabresd: Add PCIe support
2014-05-16 Fabio EstevamARM: dts: imx6qdl-wandboard: Add HDMI support
2014-05-16 Fabio EstevamARM: dts: imx6qdl-sabresd: Add HDMI support
2014-05-16 Fabio EstevamARM: dts: imx27-pdk: Add keypad support
2014-05-16 Fabio EstevamARM: dts: imx27-pdk: Add NAND support
2014-05-16 Philipp ZabelARM: dts: imx6q-gk802: Enable HDMI
2014-05-16 Fabio EstevamARM: dts: imx27-pdk: Add USB OTG support
2014-05-16 Fabio EstevamARM: dts: imx27: Place the usb phy nodes in the board...
2014-05-16 Fabio EstevamARM: dts: imx27: Use the correct usb clock gate
2014-05-16 Fabio EstevamARM: dts: imx27-phytec-phycore-som: Move PMIC IRQ GPIO...
2014-05-16 Fabio EstevamARM: dts: imx27-pdk: Add PMIC support
2014-05-16 Alexander ShiyanARM: dts: imx51-babbage: Use predefined constants for...
2014-05-16 Alexander ShiyanARM: dts: imx51-babbage: Add devicetree node for I2C1
2014-05-16 Alexander ShiyanARM: dts: imx51-babbage: Sort nodes by name
2014-05-16 Alexander ShiyanARM: dts: imx51-babbage: Add USB OTG regulator node
2014-05-16 Alexander ShiyanARM: dts: imx51-babbage: Use predefined constants for...
2014-05-16 Alexander ShiyanARM: dts: imx51-babbage: Add missing pingroup for PMIC
2014-05-16 Alexander ShiyanARM: dts: imx51-babbage: Move "hog" pins into correspon...
2014-05-16 Alexander ShiyanARM: dts: i.MX51: Allow to define partitions onto NFC
2014-05-16 Philipp ZabelARM: dts: pbab01: Enable DVI
2014-05-16 Philipp ZabelARM: dts: pbab01: Enable UART1
2014-05-16 Philipp ZabelARM: dts: pfla02: Add UART1 (uart3)
2014-05-16 Philipp ZabelARM: dts: pbab01: Add I2C devices
2014-05-16 Philipp ZabelARM: dts: pbab01: Add I2C2 and I2C3
2014-05-16 Philipp ZabelARM: dts: pbab01: Set linux,stdout-path to UART4
2014-05-16 Philipp ZabelARM: dts: pfla02: PHY reset is active-low
2014-05-16 Philipp ZabelARM: dts: pfla02: Add GPIO LEDs
2014-05-16 Philipp ZabelARM: dts: Add Phytec pbab01 with i.MX6 DualLite/Solo
2014-05-16 Philipp ZabelARM: dts: Add Phytec pfla02 with i.MX6 DualLite/Solo
2014-05-16 Fabio EstevamARM: dts: imx27-pdk: Pass the FEC pin configuration
2014-05-16 Fabio EstevamARM: dts: imx27-pdk: Pass the UART1 pin configuration
2014-05-16 Fabio EstevamARM: dts: imx27-pdk: Keep the dt nodes sorted
2014-05-16 Alexander ShiyanARM i.MX51: Add Digi ConnectCore devicetree
2014-05-16 Alexander ShiyanARM: dts: i.MX: Use single naming style for i.MX WEIM...
2014-05-16 Denis CarikliARM: dts: cpuimx51 Add touchscreen support.
2014-05-16 Denis CarikliARM: dts: cpuimx35 Add touchscreen support.
2014-05-16 Denis CarikliARM: dts: mbimxsd51 baseboard: Add USB support.
2014-05-16 Stefan AgnerARM: dts: add initial Colibri VF61 board support
2014-05-16 Stefan Agnerof: add vendor prefix for Toradex AG
2014-05-16 Fabio EstevamARM: dts: imx27-pdk: Pass the memory range
2014-05-16 Alexander ShiyanARM: dts: imx27-phytec-phycore-rdk: Add display control...
2014-05-16 Michael HeimpoldARM: dts: imx28-duckbill: use symbolic names from gpio.h
2014-05-16 Michael HeimpoldARM: dts: imx28-duckbill: fix phy reset gpio
2014-05-16 Michael HeimpoldARM: dts: imx28: include gpio.h to allow use of symboli...
2014-05-16 Michael HeimpoldARM: dts: imx28-duckbill: fix mmc settings
2014-05-16 Fabio EstevamARM: dts: imx51-babbage: Add USB OTG support
2014-05-16 Fabio EstevamARM: dts: imx51-babbage: Add USB Host1 support
2014-05-16 Fabio EstevamARM: dts: imx35-pdk: Add initial device tree support
2014-05-16 Xiubo LiARM: dts: vf610-twr: Enables FTM PWM device.
2014-05-16 Xiubo LiARM: dts: vf610-twr: Add PWM0's pinctrl node
2014-05-16 Xiubo LiARM: dts: vf610: Add Freescale FTM PWM node.
2014-05-16 Philipp ZabelARM: dts: i.MX53: Add reset line to VPU device node
2014-05-16 Philipp ZabelARM: dts: i.MX53: Enable CODA7541 VPU
2014-05-16 Fabio EstevamARM: dts: imx25-pdk: Add USB Host1 support
2014-05-16 Alexander ShiyanARM: dts: imx27-phytec-phycore-rdk: Add display support
2014-05-16 Fabio EstevamARM: dts: imx25-pdk: Add CAN support
2014-05-16 Fabio EstevamARM: dts: imx25-pdk: Add keypad support
2014-05-16 Fabio EstevamARM: dts: imx25-pdk: Add audio support
2014-04-30 Denis CarikliARM: dts: mbimxsd35 baseboard: Add USB support.
2014-04-30 Denis CarikliARM: dts: i.MX35: Add USB support.
2014-04-30 Denis CarikliARM: dts: mbimxsd25 baseboard: Add USB support
2014-04-30 Fabio EstevamARM: dts: imx25.dtsi: Fix USB support.
2014-04-30 Fabio EstevamARM: dts: mx35: USB block requires only one clock
2014-04-30 Fabio EstevamARM: dts: mx25: USB block requires only one clock
2014-04-30 Cosmin StoicaARM: dts: vf610-twr: Add support for sdhc1
2014-04-30 Fabio EstevamARM: dts: imx25-pdk: Add esdhc1 support
2014-04-30 Fabio EstevamARM: dts: imx25-pdk: Provide an Ethernet PHY reset
2014-04-30 Fabio EstevamARM: dts: imx25-pdk: Provide a regulator for Ethernet PHY
2014-04-30 Fabio EstevamARM: dts: imx25-pdk: Add FEC pins
2014-04-30 Fabio EstevamARM: dts: imx25-pdk: Add UART1 pins
2014-04-30 Fabio EstevamARM: dts: imx25-pdk: Sort the dt nodes
2014-04-30 Vincent StehléARM: dts: imx6qdl-sabresd.dtsi: Add red led
2014-04-30 Alexander ShiyanARM: dts: imx27-phytec-phycore-som: Enable SSI1
2014-04-30 Alexander ShiyanARM: dts: imx27-phytec-phycore-rdk: Add missing pinctrl...
2014-04-30 Marek VasutARM: dts: imx: Add alias for ethernet controller
2014-04-30 Denis CarikliARM: dts: mbimxsd35: Add sound support.
next