GitHub/LineageOS/G12/android_kernel_amlogic_linux-4.9.git
Author Commit
2007-10-09 Grant Likely[POWERPC] Enable debug info on boot wrapper
2007-10-09 Paul Mackerras[POWERPC] Remove unused old code from powermac setup...
2007-10-09 Stephen Rothwell[POWERPC] Remove some more section mismatch warnings
2007-10-09 Paul Mackerras[POWERPC] Use cache-inhibited large page bit from firmware
2007-10-09 Stephen Rothwell[POWERPC] Prepare to remove of_platform_driver name
2007-10-09 Stephen Rothwell[POWERPC] iSeries: Correct missing newline in printk
2007-10-08 Grant Likely[POWERPC] Lite5200: Use comma delimiter format for...
2007-10-08 Peter Korsgaard[POWERPC] spi: Support non-QE processors
2007-10-08 Anton Vorontsov[POWERPC] 85xx: mpc85xx_mds - reset UCC ethernet properly
2007-10-08 Anton Vorontsov[POWERPC] 85xx: mpc8568mds - update dts to be able...
2007-10-08 Anton Vorontsov[POWERPC] QE: pario - support for MPC85xx layout
2007-10-08 Anton Vorontsov[POWERPC] QEIC: Implement pluggable handlers, fix MPIC...
2007-10-08 Anton Vorontsov[POWERPC] mpc85xx_mds: select QUICC_ENGINE
2007-10-08 Timur Tabi[POWERPC] 86xx: update immap_86xx.h for the 8610
2007-10-08 Kumar Gala[POWERPC] 85xx/86xx: refactor RSTCR reset code
2007-10-08 Kumar Gala[POWERPC] Use for_each_ matching routinues for pci...
2007-10-08 Kumar Gala[POWERPC] FSL: Access PCIe LTSSM register with correct...
2007-10-08 Dale Farnsworth[POWERPC] 85xx: Failure with odd memory sizes and CONFI...
2007-10-08 Xianghua Xiao[POWERPC] Add initial MPC8610 HPCD Platform files.
2007-10-08 Jason Jin[POWERPC] Treat 8610 PCIe host bridge as transparent
2007-10-08 Xianghua Xiao[POWERPC] Add initial MPC8610 HPCD Device Tree Source...
2007-10-08 Peter Korsgaard[POWERPC] spi: mode should be "cpu-qe" instead of "qe"
2007-10-08 Peter Korsgaard[POWERPC] spi: Use fsl_spi instead of mpc83xx_spi
2007-10-08 Timur Tabi[POWERPC] qe: miscellaneous code improvements and fixes...
2007-10-08 Kumar Gala[POWERPC] Update .gitignore for new vdso generated...
2007-10-08 Kumar Gala[POWERPC] Fixup MPC8568 dts
2007-10-04 Anton Vorontsov[POWERPC] mpc8568mds.dts: fix PCIe I/O address space...
2007-10-04 Anton Vorontsov[POWERPC] MPC8568E-MDS: add support for ds1374 rtc
2007-10-04 Anton Vorontsov[POWERPC] fsl_soc: fix uninitialized i2c_board_info...
2007-10-04 Scott Wood[POWERPC] cpm: Describe multi-user ram in its own devic...
2007-10-04 Kumar Gala[POWERPC] Cleaned up whitespace in head_fsl_booke.S
2007-10-04 Emil Medve[POWERPC] QE: Added missing CEURNR register
2007-10-04 Peter Korsgaard[POWERPC] fsl_soc: rtc-ds1307 support
2007-10-04 Peter Korsgaard[POWERPC] fsl_soc: Fix trivial printk typo.
2007-10-04 Scott Wood[POWERPC] 8xx: Move softemu8xx.c from arch/ppc
2007-10-04 Roy Zang[POWERPC] bootwrapper: adds cuboot for MPC7448HPC2...
2007-10-04 Scott Wood[POWERPC] mpc82xx: Add pq2fads board support.
2007-10-04 Scott Wood[POWERPC] mpc82xx: Update mpc8272ads, and factor out...
2007-10-04 Scott Wood[POWERPC] 8xx/wrapper: Embedded Planet EP88xC support
2007-10-04 Scott Wood[POWERPC] 8xx: mpc885ads cleanup
2007-10-04 Scott Wood[POWERPC] Document local bus nodes in the device tree...
2007-10-04 Scott Wood[POWERPC] mpc8272ads: Change references from 82xx_ADS...
2007-10-04 Scott Wood[POWERPC] mpc82xx: Rename mpc82xx_ads to mpc8272_ads.
2007-10-04 Scott Wood[POWERPC] mpc82xx: Remove a bunch of cruft that duplica...
2007-10-04 Scott Wood[POWERPC] mpc82xx: Define CPU_FTR_NEED_COHERENT
2007-10-04 Scott Wood[POWERPC] cpm2: Add cpm2_set_pin().
2007-10-04 Scott Wood[POWERPC] cpm2: Add SCCs to cpm2_clk_setup(), and cpm2_...
2007-10-04 Scott Wood[POWERPC] cpm2: Infrastructure code cleanup.
2007-10-04 John Traill[POWERPC] 8xx: Set initial memory limit.
2007-10-04 Scott Wood[POWERPC] 8xx: Work around CPU15 erratum.
2007-10-04 Scott Wood[POWERPC] 8xx: Add pin and clock setting functions.
2007-10-04 Scott Wood[POWERPC] 8xx: Infrastructure code cleanup.
2007-10-04 Scott Wood[POWERPC] 8xx: Fix CONFIG_PIN_TLB.
2007-10-04 Scott Wood[POWERPC] cpm_uart: Issue STOP_TX command before initia...
2007-10-04 Scott Wood[POWERPC] cpm_uart: sparse fixes
2007-10-04 Scott Wood[POWERPC] cpm_uart: Be an of_platform device when CONFI...
2007-10-04 Scott Wood[POWERPC] bootwrapper: Use fsl_get_immr() in cuboot...
2007-10-04 Scott Wood[POWERPC] bootwrapper: Add fsl_get_immr() and 8xx/pq2...
2007-10-04 Scott Wood[POWERPC] bootwrapper: Support all-in-one PCI nodes...
2007-10-04 Scott Wood[POWERPC] Add early debug console for CPM serial ports.
2007-10-04 Scott Wood[POWERPC] Introduce new CPM device bindings.
2007-10-04 Scott Wood[POWERPC] CPM: Change from fsl,brg-frequency to brg...
2007-10-04 Paul Mackerras[PPC] Use cpu setup routines from cpu_setup_44x.S for...
2007-10-03 Grant Likely[POWERPC] Uartlite: Revert register io access changes
2007-10-03 Grant Likely[POWERPC] Uartlite: Add macros for register names
2007-10-03 Grant Likely[POWERPC] Setup default eth addr in embed_config for...
2007-10-03 Grant Likely[POWERPC] XilinxFB: Move xilinxfb_platform_data definit...
2007-10-03 Grant Likely[POWERPC] Uartlite: Flush RX fifo in bootwrapper
2007-10-03 Josh Boyer[POWERPC] Add treeImage to .gitignore
2007-10-03 Grant Likely[POWERPC] Uartlite: Let the console be initialized...
2007-10-03 Grant Likely[POWERPC] Uartlite: Add of-platform-bus binding
2007-10-03 Grant Likely[POWERPC] Uartlite: Comment block tidy
2007-10-03 Grant Likely[POWERPC] Uartlite: Separate the bus binding from the...
2007-10-03 Grant Likely[POWERPC] Uartlite: Add macro for uartlite device name
2007-10-03 Grant Likely[POWERPC] Uartlite: change name of ports to ulite_ports
2007-10-03 Grant Likely[POWERPC] Uartlite: Fix reg io to access documented...
2007-10-03 Grant Likely[POWERPC] Add PowerPC Xilinx Virtex entry to maintainers
2007-10-03 Grant Likely[POWERPC] Virtex: Add generic Xilinx Virtex board support
2007-10-03 Grant Likely[POWERPC] Virtex: add xilinx interrupt controller driver
2007-10-03 Grant Likely[POWERPC] Virtex: Add Kconfig macros for Xilinx Virtex...
2007-10-03 Grant Likely[POWERPC] Virtex: Add uartlite bootwrapper driver
2007-10-03 Valentine Barshak[POWERPC] 4xx: 440EPx/GRx incorrect write to DDR SDRAM...
2007-10-03 Valentine Barshak[POWERPC] 4xx: Move 440EP(x) FPU setup from head_44x...
2007-10-03 Valentine Barshak[POWERPC] 4xx: Introduce cpu_setup functionality to...
2007-10-03 Josh Boyer[POWERPC] 4xx: Fix Walnut wrapper compile errors
2007-10-03 Tony Breeds[POWERPC] Enable tickless idle and high res timers...
2007-10-03 Tony Breeds[POWERPC] Implement clockevents driver for powerpc
2007-10-03 Paul MackerrasMerge branch 'ppc-fixes' of git://git.bocc.de/dbox2...
2007-10-03 Paul MackerrasMerge branch 'linux-2.6' into for-2.6.24
2007-10-03 Tony Breeds[POWERPC] Fix panic in RTAS code
2007-10-03 Linas Vepstas[POWERPC] Use alloc_maybe_bootmem() in pcibios_alloc_co...
2007-10-03 Ishizaki Kou[POWERPC] Celleb: update for PCI
2007-10-03 Ishizaki Kou[POWERPC] Celleb: Serial I/O update
2007-10-03 Ishizaki Kou[POWERPC] Celleb: New HTAB Guest OS Interface on Beat
2007-10-03 Ishizaki Kou[POWERPC] Celleb: Support for Power/Reset buttons
2007-10-03 Ishizaki Kou[POWERPC] Celleb: Move pause, kexec_cpu_down to beat.c
2007-10-03 Joachim Fenkes[POWERPC] ibmebus: More descriptive error return code...
2007-10-03 Michael Ellerman[POWERPC] Update axon_msi to use dcr_host_t.base
2007-10-03 Michael Ellerman[POWERPC] Update mpic to use dcr_host_t.base
2007-10-03 Michael Ellerman[POWERPC] Store the base address in dcr_host_t
next