From ff37e337beb838d4c2540fa93b2c4c632ee17750 Mon Sep 17 00:00:00 2001 From: Sujith Date: Mon, 24 Nov 2008 12:07:55 +0530 Subject: [PATCH] ath9k: Code scrub Merge core.c and base.c Remove Antenna Diversity (unused now). Remove unused chainmask handling code. Comment, indentation scrub. Signed-off-by: Sujith Signed-off-by: John W. Linville --- drivers/net/wireless/ath9k/Makefile | 3 +- drivers/net/wireless/ath9k/beacon.c | 80 +- drivers/net/wireless/ath9k/core.c | 1610 --------------------------- drivers/net/wireless/ath9k/core.h | 155 +-- drivers/net/wireless/ath9k/main.c | 1195 +++++++++++++++++++- drivers/net/wireless/ath9k/rc.c | 9 +- drivers/net/wireless/ath9k/recv.c | 22 + drivers/net/wireless/ath9k/xmit.c | 22 +- 8 files changed, 1231 insertions(+), 1865 deletions(-) delete mode 100644 drivers/net/wireless/ath9k/core.c diff --git a/drivers/net/wireless/ath9k/Makefile b/drivers/net/wireless/ath9k/Makefile index c58cfdeb49c..c741e8d3474 100644 --- a/drivers/net/wireless/ath9k/Makefile +++ b/drivers/net/wireless/ath9k/Makefile @@ -9,7 +9,6 @@ ath9k-y += hw.o \ main.o \ recv.o \ xmit.o \ - rc.o \ - core.o + rc.o obj-$(CONFIG_ATH9K) += ath9k.o diff --git a/drivers/net/wireless/ath9k/beacon.c b/drivers/net/wireless/ath9k/beacon.c index dcf23834194..377d2df0531 100644 --- a/drivers/net/wireless/ath9k/beacon.c +++ b/drivers/net/wireless/ath9k/beacon.c @@ -14,13 +14,9 @@ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ - /* Implementation of beacon processing. */ - #include "core.h" /* - * Configure parameters for the beacon queue - * * This function will modify certain transmit queue properties depending on * the operating mode of the station (AP or AdHoc). Parameters are AIFS * settings and channel width min/max @@ -54,9 +50,15 @@ static int ath_beaconq_config(struct ath_softc *sc) } } +static void ath_bstuck_process(struct ath_softc *sc) +{ + DPRINTF(sc, ATH_DBG_BEACON, + "%s: stuck beacon; resetting (bmiss count %u)\n", + __func__, sc->sc_bmisscount); + ath_reset(sc, false); +} + /* - * Setup the beacon frame for transmit. - * * Associates the beacon frame buffer with a transmit descriptor. Will set * up all required antenna switch parameters, rate codes, and channel flags. * Beacons are always sent out at the lowest rate, and are not retried. @@ -138,14 +140,7 @@ static void ath_beacon_setup(struct ath_softc *sc, ctsrate, ctsduration, series, 4, 0); } -/* - * Generate beacon frame and queue cab data for a vap. - * - * Updates the contents of the beacon frame. It is assumed that the buffer for - * the beacon frame has been allocated in the ATH object, and simply needs to - * be filled for this cycle. Also, any CAB (crap after beacon?) traffic will - * be added to the beacon frame at this point. -*/ +/* Generate beacon frame and queue cab data for a vap */ static struct ath_buf *ath_beacon_generate(struct ath_softc *sc, int if_id) { struct ath_buf *bf; @@ -275,14 +270,6 @@ static void ath_beacon_start_adhoc(struct ath_softc *sc, int if_id) sc->sc_bhalq, ito64(bf->bf_daddr), bf->bf_desc); } -/* - * Setup a h/w transmit queue for beacons. - * - * This function allocates an information structure (struct ath9k_txq_info) - * on the stack, sets some specific parameters (zero out channel width - * min/max, and enable aifs). The info structure does not need to be - * persistant. -*/ int ath_beaconq_setup(struct ath_hal *ah) { struct ath9k_tx_queue_info qi; @@ -295,14 +282,6 @@ int ath_beaconq_setup(struct ath_hal *ah) return ath9k_hw_setuptxqueue(ah, ATH9K_TX_QUEUE_BEACON, &qi); } - -/* - * Allocate and setup an initial beacon frame. - * - * Allocate a beacon state variable for a specific VAP instance created on - * the ATH interface. This routine also calculates the beacon "slot" for - * staggared beacons in the mBSSID case. -*/ int ath_beacon_alloc(struct ath_softc *sc, int if_id) { struct ieee80211_vif *vif; @@ -321,7 +300,6 @@ int ath_beacon_alloc(struct ath_softc *sc, int if_id) if (!avp->av_bcbuf) { /* Allocate beacon state for hostap/ibss. We know * a buffer is available. */ - avp->av_bcbuf = list_first_entry(&sc->sc_bbuf, struct ath_buf, list); list_del(&avp->av_bcbuf->list); @@ -427,12 +405,6 @@ int ath_beacon_alloc(struct ath_softc *sc, int if_id) return 0; } -/* - * Reclaim beacon resources and return buffer to the pool. - * - * Checks the VAP to put the beacon frame buffer back to the ATH object - * queue, and de-allocates any skbs that were sent as CAB traffic. -*/ void ath_beacon_return(struct ath_softc *sc, struct ath_vap *avp) { if (avp->av_bcbuf != NULL) { @@ -458,13 +430,6 @@ void ath_beacon_return(struct ath_softc *sc, struct ath_vap *avp) } } -/* - * Tasklet for Sending Beacons - * - * Transmit one or more beacon frames at SWBA. Dynamic updates to the frame - * contents are done as needed and the slot time is also adjusted based on - * current state. -*/ void ath9k_beacon_tasklet(unsigned long data) { struct ath_softc *sc = (struct ath_softc *)data; @@ -481,9 +446,7 @@ void ath9k_beacon_tasklet(unsigned long data) if (sc->sc_flags & SC_OP_NO_RESET) { show_cycles = ath9k_hw_GetMibCycleCountsPct(ah, - &rx_clear, - &rx_frame, - &tx_frame); + &rx_clear, &rx_frame, &tx_frame); } /* @@ -605,9 +568,10 @@ void ath9k_beacon_tasklet(unsigned long data) if (sc->sc_updateslot == UPDATE) { sc->sc_updateslot = COMMIT; /* commit next beacon */ sc->sc_slotupdate = slot; - } else if (sc->sc_updateslot == COMMIT && sc->sc_slotupdate == slot) - ath_setslottime(sc); /* commit change to hardware */ - + } else if (sc->sc_updateslot == COMMIT && sc->sc_slotupdate == slot) { + ath9k_hw_setslottime(sc->sc_ah, sc->sc_slottime); + sc->sc_updateslot = OK; + } if (bfaddr != 0) { /* * Stop any current dma and put the new frame(s) on the queue. @@ -629,20 +593,6 @@ void ath9k_beacon_tasklet(unsigned long data) } } -/* - * Tasklet for Beacon Stuck processing - * - * Processing for Beacon Stuck. - * Basically resets the chip. -*/ -void ath_bstuck_process(struct ath_softc *sc) -{ - DPRINTF(sc, ATH_DBG_BEACON, - "%s: stuck beacon; resetting (bmiss count %u)\n", - __func__, sc->sc_bmisscount); - ath_reset(sc, false); -} - /* * Configure the beacon and sleep timers. * @@ -886,8 +836,6 @@ void ath_beacon_config(struct ath_softc *sc, int if_id) } } -/* Function to collect beacon rssi data and resync beacon if necessary */ - void ath_beacon_sync(struct ath_softc *sc, int if_id) { /* diff --git a/drivers/net/wireless/ath9k/core.c b/drivers/net/wireless/ath9k/core.c deleted file mode 100644 index fb6a013f3f3..00000000000 --- a/drivers/net/wireless/ath9k/core.c +++ /dev/null @@ -1,1610 +0,0 @@ -/* - * Copyright (c) 2008, Atheros Communications Inc. - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - */ - -#include "core.h" -#include "regd.h" - -static u32 ath_chainmask_sel_up_rssi_thres = - ATH_CHAINMASK_SEL_UP_RSSI_THRES; -static u32 ath_chainmask_sel_down_rssi_thres = - ATH_CHAINMASK_SEL_DOWN_RSSI_THRES; -static u32 ath_chainmask_sel_period = - ATH_CHAINMASK_SEL_TIMEOUT; - -/* return bus cachesize in 4B word units */ - -static void bus_read_cachesize(struct ath_softc *sc, int *csz) -{ - u8 u8tmp; - - pci_read_config_byte(sc->pdev, PCI_CACHE_LINE_SIZE, (u8 *)&u8tmp); - *csz = (int)u8tmp; - - /* - * This check was put in to avoid "unplesant" consequences if - * the bootrom has not fully initialized all PCI devices. - * Sometimes the cache line size register is not set - */ - - if (*csz == 0) - *csz = DEFAULT_CACHELINE >> 2; /* Use the default size */ -} - -static u8 parse_mpdudensity(u8 mpdudensity) -{ - /* - * 802.11n D2.0 defined values for "Minimum MPDU Start Spacing": - * 0 for no restriction - * 1 for 1/4 us - * 2 for 1/2 us - * 3 for 1 us - * 4 for 2 us - * 5 for 4 us - * 6 for 8 us - * 7 for 16 us - */ - switch (mpdudensity) { - case 0: - return 0; - case 1: - case 2: - case 3: - /* Our lower layer calculations limit our precision to - 1 microsecond */ - return 1; - case 4: - return 2; - case 5: - return 4; - case 6: - return 8; - case 7: - return 16; - default: - return 0; - } -} - -/* - * Set current operating mode -*/ -static void ath_setcurmode(struct ath_softc *sc, enum wireless_mode mode) -{ - sc->sc_curmode = mode; - /* - * All protection frames are transmited at 2Mb/s for - * 11g, otherwise at 1Mb/s. - * XXX select protection rate index from rate table. - */ - sc->sc_protrix = (mode == ATH9K_MODE_11G ? 1 : 0); -} - -/* - * Set up rate table (legacy rates) - */ -static void ath_setup_rates(struct ath_softc *sc, enum ieee80211_band band) -{ - struct ath_rate_table *rate_table = NULL; - struct ieee80211_supported_band *sband; - struct ieee80211_rate *rate; - int i, maxrates; - - switch (band) { - case IEEE80211_BAND_2GHZ: - rate_table = sc->hw_rate_table[ATH9K_MODE_11G]; - break; - case IEEE80211_BAND_5GHZ: - rate_table = sc->hw_rate_table[ATH9K_MODE_11A]; - break; - default: - break; - } - - if (rate_table == NULL) - return; - - sband = &sc->sbands[band]; - rate = sc->rates[band]; - - if (rate_table->rate_cnt > ATH_RATE_MAX) - maxrates = ATH_RATE_MAX; - else - maxrates = rate_table->rate_cnt; - - for (i = 0; i < maxrates; i++) { - rate[i].bitrate = rate_table->info[i].ratekbps / 100; - rate[i].hw_value = rate_table->info[i].ratecode; - sband->n_bitrates++; - DPRINTF(sc, ATH_DBG_CONFIG, - "%s: Rate: %2dMbps, ratecode: %2d\n", - __func__, - rate[i].bitrate / 10, - rate[i].hw_value); - } -} - -/* - * Set up channel list - */ -static int ath_setup_channels(struct ath_softc *sc) -{ - struct ath_hal *ah = sc->sc_ah; - int nchan, i, a = 0, b = 0; - u8 regclassids[ATH_REGCLASSIDS_MAX]; - u32 nregclass = 0; - struct ieee80211_supported_band *band_2ghz; - struct ieee80211_supported_band *band_5ghz; - struct ieee80211_channel *chan_2ghz; - struct ieee80211_channel *chan_5ghz; - struct ath9k_channel *c; - - /* Fill in ah->ah_channels */ - if (!ath9k_regd_init_channels(ah, ATH_CHAN_MAX, (u32 *)&nchan, - regclassids, ATH_REGCLASSIDS_MAX, - &nregclass, CTRY_DEFAULT, false, 1)) { - u32 rd = ah->ah_currentRD; - DPRINTF(sc, ATH_DBG_FATAL, - "%s: unable to collect channel list; " - "regdomain likely %u country code %u\n", - __func__, rd, CTRY_DEFAULT); - return -EINVAL; - } - - band_2ghz = &sc->sbands[IEEE80211_BAND_2GHZ]; - band_5ghz = &sc->sbands[IEEE80211_BAND_5GHZ]; - chan_2ghz = sc->channels[IEEE80211_BAND_2GHZ]; - chan_5ghz = sc->channels[IEEE80211_BAND_5GHZ]; - - for (i = 0; i < nchan; i++) { - c = &ah->ah_channels[i]; - if (IS_CHAN_2GHZ(c)) { - chan_2ghz[a].band = IEEE80211_BAND_2GHZ; - chan_2ghz[a].center_freq = c->channel; - chan_2ghz[a].max_power = c->maxTxPower; - - if (c->privFlags & CHANNEL_DISALLOW_ADHOC) - chan_2ghz[a].flags |= IEEE80211_CHAN_NO_IBSS; - if (c->channelFlags & CHANNEL_PASSIVE) - chan_2ghz[a].flags |= IEEE80211_CHAN_PASSIVE_SCAN; - - band_2ghz->n_channels = ++a; - - DPRINTF(sc, ATH_DBG_CONFIG, - "%s: 2MHz channel: %d, " - "channelFlags: 0x%x\n", - __func__, c->channel, c->channelFlags); - } else if (IS_CHAN_5GHZ(c)) { - chan_5ghz[b].band = IEEE80211_BAND_5GHZ; - chan_5ghz[b].center_freq = c->channel; - chan_5ghz[b].max_power = c->maxTxPower; - - if (c->privFlags & CHANNEL_DISALLOW_ADHOC) - chan_5ghz[b].flags |= IEEE80211_CHAN_NO_IBSS; - if (c->channelFlags & CHANNEL_PASSIVE) - chan_5ghz[b].flags |= IEEE80211_CHAN_PASSIVE_SCAN; - - band_5ghz->n_channels = ++b; - - DPRINTF(sc, ATH_DBG_CONFIG, - "%s: 5MHz channel: %d, " - "channelFlags: 0x%x\n", - __func__, c->channel, c->channelFlags); - } - } - - return 0; -} - -/* - * Determine mode from channel flags - * - * This routine will provide the enumerated WIRELESSS_MODE value based - * on the settings of the channel flags. If no valid set of flags - * exist, the lowest mode (11b) is selected. -*/ - -static enum wireless_mode ath_chan2mode(struct ath9k_channel *chan) -{ - if (chan->chanmode == CHANNEL_A) - return ATH9K_MODE_11A; - else if (chan->chanmode == CHANNEL_G) - return ATH9K_MODE_11G; - else if (chan->chanmode == CHANNEL_B) - return ATH9K_MODE_11B; - else if (chan->chanmode == CHANNEL_A_HT20) - return ATH9K_MODE_11NA_HT20; - else if (chan->chanmode == CHANNEL_G_HT20) - return ATH9K_MODE_11NG_HT20; - else if (chan->chanmode == CHANNEL_A_HT40PLUS) - return ATH9K_MODE_11NA_HT40PLUS; - else if (chan->chanmode == CHANNEL_A_HT40MINUS) - return ATH9K_MODE_11NA_HT40MINUS; - else if (chan->chanmode == CHANNEL_G_HT40PLUS) - return ATH9K_MODE_11NG_HT40PLUS; - else if (chan->chanmode == CHANNEL_G_HT40MINUS) - return ATH9K_MODE_11NG_HT40MINUS; - - WARN_ON(1); /* should not get here */ - - return ATH9K_MODE_11B; -} - -/* - * Set the current channel - * - * Set/change channels. If the channel is really being changed, it's done - * by reseting the chip. To accomplish this we must first cleanup any pending - * DMA, then restart stuff after a la ath_init. -*/ -int ath_set_channel(struct ath_softc *sc, struct ath9k_channel *hchan) -{ - struct ath_hal *ah = sc->sc_ah; - bool fastcc = true, stopped; - - if (sc->sc_flags & SC_OP_INVALID) /* the device is invalid or removed */ - return -EIO; - - DPRINTF(sc, ATH_DBG_CONFIG, - "%s: %u (%u MHz) -> %u (%u MHz), cflags:%x\n", - __func__, - ath9k_hw_mhz2ieee(ah, sc->sc_ah->ah_curchan->channel, - sc->sc_ah->ah_curchan->channelFlags), - sc->sc_ah->ah_curchan->channel, - ath9k_hw_mhz2ieee(ah, hchan->channel, hchan->channelFlags), - hchan->channel, hchan->channelFlags); - - if (hchan->channel != sc->sc_ah->ah_curchan->channel || - hchan->channelFlags != sc->sc_ah->ah_curchan->channelFlags || - (sc->sc_flags & SC_OP_CHAINMASK_UPDATE) || - (sc->sc_flags & SC_OP_FULL_RESET)) { - int status; - /* - * This is only performed if the channel settings have - * actually changed. - * - * To switch channels clear any pending DMA operations; - * wait long enough for the RX fifo to drain, reset the - * hardware at the new frequency, and then re-enable - * the relevant bits of the h/w. - */ - ath9k_hw_set_interrupts(ah, 0); /* disable interrupts */ - ath_draintxq(sc, false); /* clear pending tx frames */ - stopped = ath_stoprecv(sc); /* turn off frame recv */ - - /* XXX: do not flush receive queue here. We don't want - * to flush data frames already in queue because of - * changing channel. */ - - if (!stopped || (sc->sc_flags & SC_OP_FULL_RESET)) - fastcc = false; - - spin_lock_bh(&sc->sc_resetlock); - if (!ath9k_hw_reset(ah, hchan, - sc->sc_ht_info.tx_chan_width, - sc->sc_tx_chainmask, - sc->sc_rx_chainmask, - sc->sc_ht_extprotspacing, - fastcc, &status)) { - DPRINTF(sc, ATH_DBG_FATAL, - "%s: unable to reset channel %u (%uMhz) " - "flags 0x%x hal status %u\n", __func__, - ath9k_hw_mhz2ieee(ah, hchan->channel, - hchan->channelFlags), - hchan->channel, hchan->channelFlags, status); - spin_unlock_bh(&sc->sc_resetlock); - return -EIO; - } - spin_unlock_bh(&sc->sc_resetlock); - - sc->sc_flags &= ~SC_OP_CHAINMASK_UPDATE; - sc->sc_flags &= ~SC_OP_FULL_RESET; - - /* Re-enable rx framework */ - if (ath_startrecv(sc) != 0) { - DPRINTF(sc, ATH_DBG_FATAL, - "%s: unable to restart recv logic\n", __func__); - return -EIO; - } - /* - * Change channels and update the h/w rate map - * if we're switching; e.g. 11a to 11b/g. - */ - ath_setcurmode(sc, ath_chan2mode(hchan)); - - ath_update_txpow(sc); /* update tx power state */ - /* - * Re-enable interrupts. - */ - ath9k_hw_set_interrupts(ah, sc->sc_imask); - } - return 0; -} - -/**********************/ -/* Chainmask Handling */ -/**********************/ - -static void ath_chainmask_sel_timertimeout(unsigned long data) -{ - struct ath_chainmask_sel *cm = (struct ath_chainmask_sel *)data; - cm->switch_allowed = 1; -} - -/* Start chainmask select timer */ -static void ath_chainmask_sel_timerstart(struct ath_chainmask_sel *cm) -{ - cm->switch_allowed = 0; - mod_timer(&cm->timer, ath_chainmask_sel_period); -} - -/* Stop chainmask select timer */ -static void ath_chainmask_sel_timerstop(struct ath_chainmask_sel *cm) -{ - cm->switch_allowed = 0; - del_timer_sync(&cm->timer); -} - -static void ath_chainmask_sel_init(struct ath_softc *sc, struct ath_node *an) -{ - struct ath_chainmask_sel *cm = &an->an_chainmask_sel; - - memset(cm, 0, sizeof(struct ath_chainmask_sel)); - - cm->cur_tx_mask = sc->sc_tx_chainmask; - cm->cur_rx_mask = sc->sc_rx_chainmask; - cm->tx_avgrssi = ATH_RSSI_DUMMY_MARKER; - setup_timer(&cm->timer, - ath_chainmask_sel_timertimeout, (unsigned long) cm); -} - -int ath_chainmask_sel_logic(struct ath_softc *sc, struct ath_node *an) -{ - struct ath_chainmask_sel *cm = &an->an_chainmask_sel; - - /* - * Disable auto-swtiching in one of the following if conditions. - * sc_chainmask_auto_sel is used for internal global auto-switching - * enabled/disabled setting - */ - if (sc->sc_ah->ah_caps.tx_chainmask != ATH_CHAINMASK_SEL_3X3) { - cm->cur_tx_mask = sc->sc_tx_chainmask; - return cm->cur_tx_mask; - } - - if (cm->tx_avgrssi == ATH_RSSI_DUMMY_MARKER) - return cm->cur_tx_mask; - - if (cm->switch_allowed) { - /* Switch down from tx 3 to tx 2. */ - if (cm->cur_tx_mask == ATH_CHAINMASK_SEL_3X3 && - ATH_RSSI_OUT(cm->tx_avgrssi) >= - ath_chainmask_sel_down_rssi_thres) { - cm->cur_tx_mask = sc->sc_tx_chainmask; - - /* Don't let another switch happen until - * this timer expires */ - ath_chainmask_sel_timerstart(cm); - } - /* Switch up from tx 2 to 3. */ - else if (cm->cur_tx_mask == sc->sc_tx_chainmask && - ATH_RSSI_OUT(cm->tx_avgrssi) <= - ath_chainmask_sel_up_rssi_thres) { - cm->cur_tx_mask = ATH_CHAINMASK_SEL_3X3; - - /* Don't let another switch happen - * until this timer expires */ - ath_chainmask_sel_timerstart(cm); - } - } - - return cm->cur_tx_mask; -} - -/* - * Update tx/rx chainmask. For legacy association, - * hard code chainmask to 1x1, for 11n association, use - * the chainmask configuration. - */ - -void ath_update_chainmask(struct ath_softc *sc, int is_ht) -{ - sc->sc_flags |= SC_OP_CHAINMASK_UPDATE; - if (is_ht) { - sc->sc_tx_chainmask = sc->sc_ah->ah_caps.tx_chainmask; - sc->sc_rx_chainmask = sc->sc_ah->ah_caps.rx_chainmask; - } else { - sc->sc_tx_chainmask = 1; - sc->sc_rx_chainmask = 1; - } - - DPRINTF(sc, ATH_DBG_CONFIG, "%s: tx chmask: %d, rx chmask: %d\n", - __func__, sc->sc_tx_chainmask, sc->sc_rx_chainmask); -} - -/*******/ -/* ANI */ -/*******/ - -/* - * This routine performs the periodic noise floor calibration function - * that is used to adjust and optimize the chip performance. This - * takes environmental changes (location, temperature) into account. - * When the task is complete, it reschedules itself depending on the - * appropriate interval that was calculated. - */ - -static void ath_ani_calibrate(unsigned long data) -{ - struct ath_softc *sc; - struct ath_hal *ah; - bool longcal = false; - bool shortcal = false; - bool aniflag = false; - unsigned int timestamp = jiffies_to_msecs(jiffies); - u32 cal_interval; - - sc = (struct ath_softc *)data; - ah = sc->sc_ah; - - /* - * don't calibrate when we're scanning. - * we are most likely not on our home channel. - */ - if (sc->rx_filter & FIF_BCN_PRBRESP_PROMISC) - return; - - /* Long calibration runs independently of short calibration. */ - if ((timestamp - sc->sc_ani.sc_longcal_timer) >= ATH_LONG_CALINTERVAL) { - longcal = true; - DPRINTF(sc, ATH_DBG_ANI, "%s: longcal @%lu\n", - __func__, jiffies); - sc->sc_ani.sc_longcal_timer = timestamp; - } - - /* Short calibration applies only while sc_caldone is false */ - if (!sc->sc_ani.sc_caldone) { - if ((timestamp - sc->sc_ani.sc_shortcal_timer) >= - ATH_SHORT_CALINTERVAL) { - shortcal = true; - DPRINTF(sc, ATH_DBG_ANI, "%s: shortcal @%lu\n", - __func__, jiffies); - sc->sc_ani.sc_shortcal_timer = timestamp; - sc->sc_ani.sc_resetcal_timer = timestamp; - } - } else { - if ((timestamp - sc->sc_ani.sc_resetcal_timer) >= - ATH_RESTART_CALINTERVAL) { - ath9k_hw_reset_calvalid(ah, ah->ah_curchan, - &sc->sc_ani.sc_caldone); - if (sc->sc_ani.sc_caldone) - sc->sc_ani.sc_resetcal_timer = timestamp; - } - } - - /* Verify whether we must check ANI */ - if ((timestamp - sc->sc_ani.sc_checkani_timer) >= - ATH_ANI_POLLINTERVAL) { - aniflag = true; - sc->sc_ani.sc_checkani_timer = timestamp; - } - - /* Skip all processing if there's nothing to do. */ - if (longcal || shortcal || aniflag) { - /* Call ANI routine if necessary */ - if (aniflag) - ath9k_hw_ani_monitor(ah, &sc->sc_halstats, - ah->ah_curchan); - - /* Perform calibration if necessary */ - if (longcal || shortcal) { - bool iscaldone = false; - - if (ath9k_hw_calibrate(ah, ah->ah_curchan, - sc->sc_rx_chainmask, longcal, - &iscaldone)) { - if (longcal) - sc->sc_ani.sc_noise_floor = - ath9k_hw_getchan_noise(ah, - ah->ah_curchan); - - DPRINTF(sc, ATH_DBG_ANI, - "%s: calibrate chan %u/%x nf: %d\n", - __func__, - ah->ah_curchan->channel, - ah->ah_curchan->channelFlags, - sc->sc_ani.sc_noise_floor); - } else { - DPRINTF(sc, ATH_DBG_ANY, - "%s: calibrate chan %u/%x failed\n", - __func__, - ah->ah_curchan->channel, - ah->ah_curchan->channelFlags); - } - sc->sc_ani.sc_caldone = iscaldone; - } - } - - /* - * Set timer interval based on previous results. - * The interval must be the shortest necessary to satisfy ANI, - * short calibration and long calibration. - */ - - cal_interval = ATH_ANI_POLLINTERVAL; - if (!sc->sc_ani.sc_caldone) - cal_interval = min(cal_interval, (u32)ATH_SHORT_CALINTERVAL); - - mod_timer(&sc->sc_ani.timer, jiffies + msecs_to_jiffies(cal_interval)); -} - -/********/ -/* Core */ -/********/ - -int ath_open(struct ath_softc *sc, struct ath9k_channel *initial_chan) -{ - struct ath_hal *ah = sc->sc_ah; - int status; - int error = 0; - - DPRINTF(sc, ATH_DBG_CONFIG, "%s: mode %d\n", - __func__, sc->sc_ah->ah_opmode); - - /* Reset SERDES registers */ - ath9k_hw_configpcipowersave(ah, 0); - - /* - * The basic interface to setting the hardware in a good - * state is ``reset''. On return the hardware is known to - * be powered up and with interrupts disabled. This must - * be followed by initialization of the appropriate bits - * and then setup of the interrupt mask. - */ - - spin_lock_bh(&sc->sc_resetlock); - if (!ath9k_hw_reset(ah, initial_chan, - sc->sc_ht_info.tx_chan_width, - sc->sc_tx_chainmask, sc->sc_rx_chainmask, - sc->sc_ht_extprotspacing, false, &status)) { - DPRINTF(sc, ATH_DBG_FATAL, - "%s: unable to reset hardware; hal status %u " - "(freq %u flags 0x%x)\n", __func__, status, - initial_chan->channel, initial_chan->channelFlags); - error = -EIO; - spin_unlock_bh(&sc->sc_resetlock); - goto done; - } - spin_unlock_bh(&sc->sc_resetlock); - - /* - * This is needed only to setup initial state - * but it's best done after a reset. - */ - ath_update_txpow(sc); - - /* - * Setup the hardware after reset: - * The receive engine is set going. - * Frame transmit is handled entirely - * in the frame output path; there's nothing to do - * here except setup the interrupt mask. - */ - if (ath_startrecv(sc) != 0) { - DPRINTF(sc, ATH_DBG_FATAL, - "%s: unable to start recv logic\n", __func__); - error = -EIO; - goto done; - } - - /* Setup our intr mask. */ - sc->sc_imask = ATH9K_INT_RX | ATH9K_INT_TX - | ATH9K_INT_RXEOL | ATH9K_INT_RXORN - | ATH9K_INT_FATAL | ATH9K_INT_GLOBAL; - - if (ah->ah_caps.hw_caps & ATH9K_HW_CAP_GTT) - sc->sc_imask |= ATH9K_INT_GTT; - - if (ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT) - sc->sc_imask |= ATH9K_INT_CST; - - /* - * Enable MIB interrupts when there are hardware phy counters. - * Note we only do this (at the moment) for station mode. - */ - if (ath9k_hw_phycounters(ah) && - ((sc->sc_ah->ah_opmode == ATH9K_M_STA) || - (sc->sc_ah->ah_opmode == ATH9K_M_IBSS))) - sc->sc_imask |= ATH9K_INT_MIB; - /* - * Some hardware processes the TIM IE and fires an - * interrupt when the TIM bit is set. For hardware - * that does, if not overridden by configuration, - * enable the TIM interrupt when operating as station. - */ - if ((ah->ah_caps.hw_caps & ATH9K_HW_CAP_ENHANCEDPM) && - (sc->sc_ah->ah_opmode == ATH9K_M_STA) && - !sc->sc_config.swBeaconProcess) - sc->sc_imask |= ATH9K_INT_TIM; - - ath_setcurmode(sc, ath_chan2mode(initial_chan)); - - sc->sc_flags &= ~SC_OP_INVALID; - - /* Disable BMISS interrupt when we're not associated */ - sc->sc_imask &= ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS); - ath9k_hw_set_interrupts(sc->sc_ah,sc->sc_imask); - - ieee80211_wake_queues(sc->hw); -done: - return error; -} - -void ath_stop(struct ath_softc *sc) -{ - struct ath_hal *ah = sc->sc_ah; - - DPRINTF(sc, ATH_DBG_CONFIG, "%s: Cleaning up\n", __func__); - - ieee80211_stop_queues(sc->hw); - - /* make sure h/w will not generate any interrupt - * before setting the invalid flag. */ - ath9k_hw_set_interrupts(ah, 0); - - if (!(sc->sc_flags & SC_OP_INVALID)) { - ath_draintxq(sc, false); - ath_stoprecv(sc); - ath9k_hw_phy_disable(ah); - } else - sc->sc_rxlink = NULL; - -#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE) - if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_RFSILENT) - cancel_delayed_work_sync(&sc->rf_kill.rfkill_poll); -#endif - /* disable HAL and put h/w to sleep */ - ath9k_hw_disable(sc->sc_ah); - ath9k_hw_configpcipowersave(sc->sc_ah, 1); - - sc->sc_flags |= SC_OP_INVALID; -} - -int ath_reset(struct ath_softc *sc, bool retry_tx) -{ - struct ath_hal *ah = sc->sc_ah; - int status; - int error = 0; - - ath9k_hw_set_interrupts(ah, 0); - ath_draintxq(sc, retry_tx); - ath_stoprecv(sc); - ath_flushrecv(sc); - - /* Reset chip */ - spin_lock_bh(&sc->sc_resetlock); - if (!ath9k_hw_reset(ah, sc->sc_ah->ah_curchan, - sc->sc_ht_info.tx_chan_width, - sc->sc_tx_chainmask, sc->sc_rx_chainmask, - sc->sc_ht_extprotspacing, false, &status)) { - DPRINTF(sc, ATH_DBG_FATAL, - "%s: unable to reset hardware; hal status %u\n", - __func__, status); - error = -EIO; - } - spin_unlock_bh(&sc->sc_resetlock); - - if (ath_startrecv(sc) != 0) - DPRINTF(sc, ATH_DBG_FATAL, - "%s: unable to start recv logic\n", __func__); - - /* - * We may be doing a reset in response to a request - * that changes the channel so update any state that - * might change as a result. - */ - ath_setcurmode(sc, ath_chan2mode(sc->sc_ah->ah_curchan)); - - ath_update_txpow(sc); - - if (sc->sc_flags & SC_OP_BEACONS) - ath_beacon_config(sc, ATH_IF_ID_ANY); /* restart beacons */ - - ath9k_hw_set_interrupts(ah, sc->sc_imask); - - /* Restart the txq */ - if (retry_tx) { - int i; - for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) { - if (ATH_TXQ_SETUP(sc, i)) { - spin_lock_bh(&sc->sc_txq[i].axq_lock); - ath_txq_schedule(sc, &sc->sc_txq[i]); - spin_unlock_bh(&sc->sc_txq[i].axq_lock); - } - } - } - - return error; -} - -/* Interrupt handler. Most of the actual processing is deferred. - * It's the caller's responsibility to ensure the chip is awake. */ - -irqreturn_t ath_isr(int irq, void *dev) -{ - struct ath_softc *sc = dev; - struct ath_hal *ah = sc->sc_ah; - enum ath9k_int status; - bool sched = false; - - do { - if (sc->sc_flags & SC_OP_INVALID) { - /* - * The hardware is not ready/present, don't - * touch anything. Note this can happen early - * on if the IRQ is shared. - */ - return IRQ_NONE; - } - if (!ath9k_hw_intrpend(ah)) { /* shared irq, not for us */ - return IRQ_NONE; - } - - /* - * Figure out the reason(s) for the interrupt. Note - * that the hal returns a pseudo-ISR that may include - * bits we haven't explicitly enabled so we mask the - * value to insure we only process bits we requested. - */ - ath9k_hw_getisr(ah, &status); /* NB: clears ISR too */ - - status &= sc->sc_imask; /* discard unasked-for bits */ - - /* - * If there are no status bits set, then this interrupt was not - * for me (should have been caught above). - */ - - if (!status) - return IRQ_NONE; - - sc->sc_intrstatus = status; - - if (status & ATH9K_INT_FATAL) { - /* need a chip reset */ - sched = true; - } else if (status & ATH9K_INT_RXORN) { - /* need a chip reset */ - sched = true; - } else { - if (status & ATH9K_INT_SWBA) { - /* schedule a tasklet for beacon handling */ - tasklet_schedule(&sc->bcon_tasklet); - } - if (status & ATH9K_INT_RXEOL) { - /* - * NB: the hardware should re-read the link when - * RXE bit is written, but it doesn't work - * at least on older hardware revs. - */ - sched = true; - } - - if (status & ATH9K_INT_TXURN) - /* bump tx trigger level */ - ath9k_hw_updatetxtriglevel(ah, true); - /* XXX: optimize this */ - if (status & ATH9K_INT_RX) - sched = true; - if (status & ATH9K_INT_TX) - sched = true; - if (status & ATH9K_INT_BMISS) - sched = true; - /* carrier sense timeout */ - if (status & ATH9K_INT_CST) - sched = true; - if (status & ATH9K_INT_MIB) { - /* - * Disable interrupts until we service the MIB - * interrupt; otherwise it will continue to - * fire. - */ - ath9k_hw_set_interrupts(ah, 0); - /* - * Let the hal handle the event. We assume - * it will clear whatever condition caused - * the interrupt. - */ - ath9k_hw_procmibevent(ah, &sc->sc_halstats); - ath9k_hw_set_interrupts(ah, sc->sc_imask); - } - if (status & ATH9K_INT_TIM_TIMER) { - if (!(ah->ah_caps.hw_caps & - ATH9K_HW_CAP_AUTOSLEEP)) { - /* Clear RxAbort bit so that we can - * receive frames */ - ath9k_hw_setrxabort(ah, 0); - sched = true; - } - } - } - } while (0); - - if (sched) { - /* turn off every interrupt except SWBA */ - ath9k_hw_set_interrupts(ah, (sc->sc_imask & ATH9K_INT_SWBA)); - tasklet_schedule(&sc->intr_tq); - } - - return IRQ_HANDLED; -} - -/* Deferred interrupt processing */ - -static void ath9k_tasklet(unsigned long data) -{ - struct ath_softc *sc = (struct ath_softc *)data; - u32 status = sc->sc_intrstatus; - - if (status & ATH9K_INT_FATAL) { - /* need a chip reset */ - ath_reset(sc, false); - return; - } else { - - if (status & - (ATH9K_INT_RX | ATH9K_INT_RXEOL | ATH9K_INT_RXORN)) { - /* XXX: fill me in */ - /* - if (status & ATH9K_INT_RXORN) { - } - if (status & ATH9K_INT_RXEOL) { - } - */ - spin_lock_bh(&sc->sc_rxflushlock); - ath_rx_tasklet(sc, 0); - spin_unlock_bh(&sc->sc_rxflushlock); - } - /* XXX: optimize this */ - if (status & ATH9K_INT_TX) - ath_tx_tasklet(sc); - /* XXX: fill me in */ - /* - if (status & ATH9K_INT_BMISS) { - } - if (status & (ATH9K_INT_TIM | ATH9K_INT_DTIMSYNC)) { - if (status & ATH9K_INT_TIM) { - } - if (status & ATH9K_INT_DTIMSYNC) { - } - } - */ - } - - /* re-enable hardware interrupt */ - ath9k_hw_set_interrupts(sc->sc_ah, sc->sc_imask); -} - -int ath_init(u16 devid, struct ath_softc *sc) -{ - struct ath_hal *ah = NULL; - int status; - int error = 0, i; - int csz = 0; - - /* XXX: hardware will not be ready until ath_open() being called */ - sc->sc_flags |= SC_OP_INVALID; - sc->sc_debug = DBG_DEFAULT; - - spin_lock_init(&sc->sc_resetlock); - tasklet_init(&sc->intr_tq, ath9k_tasklet, (unsigned long)sc); - tasklet_init(&sc->bcon_tasklet, ath9k_beacon_tasklet, - (unsigned long)sc); - - /* - * Cache line size is used to size and align various - * structures used to communicate with the hardware. - */ - bus_read_cachesize(sc, &csz); - /* XXX assert csz is non-zero */ - sc->sc_cachelsz = csz << 2; /* convert to bytes */ - - ah = ath9k_hw_attach(devid, sc, sc->mem, &status); - if (ah == NULL) { - DPRINTF(sc, ATH_DBG_FATAL, - "%s: unable to attach hardware; HAL status %u\n", - __func__, status); - error = -ENXIO; - goto bad; - } - sc->sc_ah = ah; - - /* Get the hardware key cache size. */ - sc->sc_keymax = ah->ah_caps.keycache_size; - if (sc->sc_keymax > ATH_KEYMAX) { - DPRINTF(sc, ATH_DBG_KEYCACHE, - "%s: Warning, using only %u entries in %u key cache\n", - __func__, ATH_KEYMAX, sc->sc_keymax); - sc->sc_keymax = ATH_KEYMAX; - } - - /* - * Reset the key cache since some parts do not - * reset the contents on initial power up. - */ - for (i = 0; i < sc->sc_keymax; i++) - ath9k_hw_keyreset(ah, (u16) i); - /* - * Mark key cache slots associated with global keys - * as in use. If we knew TKIP was not to be used we - * could leave the +32, +64, and +32+64 slots free. - * XXX only for splitmic. - */ - for (i = 0; i < IEEE80211_WEP_NKID; i++) { - set_bit(i, sc->sc_keymap); - set_bit(i + 32, sc->sc_keymap); - set_bit(i + 64, sc->sc_keymap); - set_bit(i + 32 + 64, sc->sc_keymap); - } - - /* Collect the channel list using the default country code */ - - error = ath_setup_channels(sc); - if (error) - goto bad; - - /* default to MONITOR mode */ - sc->sc_ah->ah_opmode = ATH9K_M_MONITOR; - - /* Setup rate tables */ - - ath_rate_attach(sc); - ath_setup_rates(sc, IEEE80211_BAND_2GHZ); - ath_setup_rates(sc, IEEE80211_BAND_5GHZ); - - /* - * Allocate hardware transmit queues: one queue for - * beacon frames and one data queue for each QoS - * priority. Note that the hal handles reseting - * these queues at the needed time. - */ - sc->sc_bhalq = ath_beaconq_setup(ah); - if (sc->sc_bhalq == -1) { - DPRINTF(sc, ATH_DBG_FATAL, - "%s: unable to setup a beacon xmit queue\n", __func__); - error = -EIO; - goto bad2; - } - sc->sc_cabq = ath_txq_setup(sc, ATH9K_TX_QUEUE_CAB, 0); - if (sc->sc_cabq == NULL) { - DPRINTF(sc, ATH_DBG_FATAL, - "%s: unable to setup CAB xmit queue\n", __func__); - error = -EIO; - goto bad2; - } - - sc->sc_config.cabqReadytime = ATH_CABQ_READY_TIME; - ath_cabq_update(sc); - - for (i = 0; i < ARRAY_SIZE(sc->sc_haltype2q); i++) - sc->sc_haltype2q[i] = -1; - - /* Setup data queues */ - /* NB: ensure BK queue is the lowest priority h/w queue */ - if (!ath_tx_setup(sc, ATH9K_WME_AC_BK)) { - DPRINTF(sc, ATH_DBG_FATAL, - "%s: unable to setup xmit queue for BK traffic\n", - __func__); - error = -EIO; - goto bad2; - } - - if (!ath_tx_setup(sc, ATH9K_WME_AC_BE)) { - DPRINTF(sc, ATH_DBG_FATAL, - "%s: unable to setup xmit queue for BE traffic\n", - __func__); - error = -EIO; - goto bad2; - } - if (!ath_tx_setup(sc, ATH9K_WME_AC_VI)) { - DPRINTF(sc, ATH_DBG_FATAL, - "%s: unable to setup xmit queue for VI traffic\n", - __func__); - error = -EIO; - goto bad2; - } - if (!ath_tx_setup(sc, ATH9K_WME_AC_VO)) { - DPRINTF(sc, ATH_DBG_FATAL, - "%s: unable to setup xmit queue for VO traffic\n", - __func__); - error = -EIO; - goto bad2; - } - - /* Initializes the noise floor to a reasonable default value. - * Later on this will be updated during ANI processing. */ - - sc->sc_ani.sc_noise_floor = ATH_DEFAULT_NOISE_FLOOR; - setup_timer(&sc->sc_ani.timer, ath_ani_calibrate, (unsigned long)sc); - - if (ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER, - ATH9K_CIPHER_TKIP, NULL)) { - /* - * Whether we should enable h/w TKIP MIC. - * XXX: if we don't support WME TKIP MIC, then we wouldn't - * report WMM capable, so it's always safe to turn on - * TKIP MIC in this case. - */ - ath9k_hw_setcapability(sc->sc_ah, ATH9K_CAP_TKIP_MIC, - 0, 1, NULL); - } - - /* - * Check whether the separate key cache entries - * are required to handle both tx+rx MIC keys. - * With split mic keys the number of stations is limited - * to 27 otherwise 59. - */ - if (ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER, - ATH9K_CIPHER_TKIP, NULL) - && ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER, - ATH9K_CIPHER_MIC, NULL) - && ath9k_hw_getcapability(ah, ATH9K_CAP_TKIP_SPLIT, - 0, NULL)) - sc->sc_splitmic = 1; - - /* turn on mcast key search if possible */ - if (!ath9k_hw_getcapability(ah, ATH9K_CAP_MCAST_KEYSRCH, 0, NULL)) - (void)ath9k_hw_setcapability(ah, ATH9K_CAP_MCAST_KEYSRCH, 1, - 1, NULL); - - sc->sc_config.txpowlimit = ATH_TXPOWER_MAX; - sc->sc_config.txpowlimit_override = 0; - - /* 11n Capabilities */ - if (ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT) { - sc->sc_flags |= SC_OP_TXAGGR; - sc->sc_flags |= SC_OP_RXAGGR; - } - - sc->sc_tx_chainmask = ah->ah_caps.tx_chainmask; - sc->sc_rx_chainmask = ah->ah_caps.rx_chainmask; - - ath9k_hw_setcapability(ah, ATH9K_CAP_DIVERSITY, 1, true, NULL); - sc->sc_defant = ath9k_hw_getdefantenna(ah); - - ath9k_hw_getmac(ah, sc->sc_myaddr); - if (ah->ah_caps.hw_caps & ATH9K_HW_CAP_BSSIDMASK) { - ath9k_hw_getbssidmask(ah, sc->sc_bssidmask); - ATH_SET_VAP_BSSID_MASK(sc->sc_bssidmask); - ath9k_hw_setbssidmask(ah, sc->sc_bssidmask); - } - - sc->sc_slottime = ATH9K_SLOT_TIME_9; /* default to short slot time */ - - /* initialize beacon slots */ - for (i = 0; i < ARRAY_SIZE(sc->sc_bslot); i++) - sc->sc_bslot[i] = ATH_IF_ID_ANY; - - /* save MISC configurations */ - sc->sc_config.swBeaconProcess = 1; - -#ifdef CONFIG_SLOW_ANT_DIV - /* range is 40 - 255, we use something in the middle */ - ath_slow_ant_div_init(&sc->sc_antdiv, sc, 0x127); -#endif - - /* setup channels and rates */ - - sc->sbands[IEEE80211_BAND_2GHZ].channels = - sc->channels[IEEE80211_BAND_2GHZ]; - sc->sbands[IEEE80211_BAND_2GHZ].bitrates = - sc->rates[IEEE80211_BAND_2GHZ]; - sc->sbands[IEEE80211_BAND_2GHZ].band = IEEE80211_BAND_2GHZ; - - if (test_bit(ATH9K_MODE_11A, sc->sc_ah->ah_caps.wireless_modes)) { - sc->sbands[IEEE80211_BAND_5GHZ].channels = - sc->channels[IEEE80211_BAND_5GHZ]; - sc->sbands[IEEE80211_BAND_5GHZ].bitrates = - sc->rates[IEEE80211_BAND_5GHZ]; - sc->sbands[IEEE80211_BAND_5GHZ].band = IEEE80211_BAND_5GHZ; - } - - return 0; -bad2: - /* cleanup tx queues */ - for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) - if (ATH_TXQ_SETUP(sc, i)) - ath_tx_cleanupq(sc, &sc->sc_txq[i]); -bad: - if (ah) - ath9k_hw_detach(ah); - - return error; -} - -/*******************/ -/* Node Management */ -/*******************/ - -void ath_node_attach(struct ath_softc *sc, struct ieee80211_sta *sta) -{ - struct ath_node *an; - - an = (struct ath_node *)sta->drv_priv; - - if (sc->sc_flags & SC_OP_TXAGGR) - ath_tx_node_init(sc, an); - - an->maxampdu = 1 << (IEEE80211_HTCAP_MAXRXAMPDU_FACTOR + - sta->ht_cap.ampdu_factor); - an->mpdudensity = parse_mpdudensity(sta->ht_cap.ampdu_density); - - ath_chainmask_sel_init(sc, an); - ath_chainmask_sel_timerstart(&an->an_chainmask_sel); -} - -void ath_node_detach(struct ath_softc *sc, struct ieee80211_sta *sta) -{ - struct ath_node *an = (struct ath_node *)sta->drv_priv; - - ath_chainmask_sel_timerstop(&an->an_chainmask_sel); - - if (sc->sc_flags & SC_OP_TXAGGR) - ath_tx_node_cleanup(sc, an); -} - -/* - * Set up New Node - * - * Setup driver-specific state for a newly associated node. This routine - * really only applies if compression or XR are enabled, there is no code - * covering any other cases. -*/ - -void ath_newassoc(struct ath_softc *sc, - struct ath_node *an, int isnew, int isuapsd) -{ - int tidno; - - /* if station reassociates, tear down the aggregation state. */ - if (!isnew) { - for (tidno = 0; tidno < WME_NUM_TID; tidno++) { - if (sc->sc_flags & SC_OP_TXAGGR) - ath_tx_aggr_teardown(sc, an, tidno); - } - } -} - -/**************/ -/* Encryption */ -/**************/ - -void ath_key_reset(struct ath_softc *sc, u16 keyix, int freeslot) -{ - ath9k_hw_keyreset(sc->sc_ah, keyix); - if (freeslot) - clear_bit(keyix, sc->sc_keymap); -} - -int ath_keyset(struct ath_softc *sc, - u16 keyix, - struct ath9k_keyval *hk, - const u8 mac[ETH_ALEN]) -{ - bool status; - - status = ath9k_hw_set_keycache_entry(sc->sc_ah, - keyix, hk, mac, false); - - return status != false; -} - -/***********************/ -/* TX Power/Regulatory */ -/***********************/ - -/* - * Set Transmit power in HAL - * - * This routine makes the actual HAL calls to set the new transmit power - * limit. -*/ - -void ath_update_txpow(struct ath_softc *sc) -{ - struct ath_hal *ah = sc->sc_ah; - u32 txpow; - - if (sc->sc_curtxpow != sc->sc_config.txpowlimit) { - ath9k_hw_set_txpowerlimit(ah, sc->sc_config.txpowlimit); - /* read back in case value is clamped */ - ath9k_hw_getcapability(ah, ATH9K_CAP_TXPOW, 1, &txpow); - sc->sc_curtxpow = txpow; - } -} - -/**************************/ -/* Slow Antenna Diversity */ -/**************************/ - -void ath_slow_ant_div_init(struct ath_antdiv *antdiv, - struct ath_softc *sc, - int32_t rssitrig) -{ - int trig; - - /* antdivf_rssitrig can range from 40 - 0xff */ - trig = (rssitrig > 0xff) ? 0xff : rssitrig; - trig = (rssitrig < 40) ? 40 : rssitrig; - - antdiv->antdiv_sc = sc; - antdiv->antdivf_rssitrig = trig; -} - -void ath_slow_ant_div_start(struct ath_antdiv *antdiv, - u8 num_antcfg, - const u8 *bssid) -{ - antdiv->antdiv_num_antcfg = - num_antcfg < ATH_ANT_DIV_MAX_CFG ? - num_antcfg : ATH_ANT_DIV_MAX_CFG; - antdiv->antdiv_state = ATH_ANT_DIV_IDLE; - antdiv->antdiv_curcfg = 0; - antdiv->antdiv_bestcfg = 0; - antdiv->antdiv_laststatetsf = 0; - - memcpy(antdiv->antdiv_bssid, bssid, sizeof(antdiv->antdiv_bssid)); - - antdiv->antdiv_start = 1; -} - -void ath_slow_ant_div_stop(struct ath_antdiv *antdiv) -{ - antdiv->antdiv_start = 0; -} - -static int32_t ath_find_max_val(int32_t *val, - u8 num_val, u8 *max_index) -{ - u32 MaxVal = *val++; - u32 cur_index = 0; - - *max_index = 0; - while (++cur_index < num_val) { - if (*val > MaxVal) { - MaxVal = *val; - *max_index = cur_index; - } - - val++; - } - - return MaxVal; -} - -void ath_slow_ant_div(struct ath_antdiv *antdiv, - struct ieee80211_hdr *hdr, - struct ath_rx_status *rx_stats) -{ - struct ath_softc *sc = antdiv->antdiv_sc; - struct ath_hal *ah = sc->sc_ah; - u64 curtsf = 0; - u8 bestcfg, curcfg = antdiv->antdiv_curcfg; - __le16 fc = hdr->frame_control; - - if (antdiv->antdiv_start && ieee80211_is_beacon(fc) - && !compare_ether_addr(hdr->addr3, antdiv->antdiv_bssid)) { - antdiv->antdiv_lastbrssi[curcfg] = rx_stats->rs_rssi; - antdiv->antdiv_lastbtsf[curcfg] = ath9k_hw_gettsf64(sc->sc_ah); - curtsf = antdiv->antdiv_lastbtsf[curcfg]; - } else { - return; - } - - switch (antdiv->antdiv_state) { - case ATH_ANT_DIV_IDLE: - if ((antdiv->antdiv_lastbrssi[curcfg] < - antdiv->antdivf_rssitrig) - && ((curtsf - antdiv->antdiv_laststatetsf) > - ATH_ANT_DIV_MIN_IDLE_US)) { - - curcfg++; - if (curcfg == antdiv->antdiv_num_antcfg) - curcfg = 0; - - if (!ath9k_hw_select_antconfig(ah, curcfg)) { - antdiv->antdiv_bestcfg = antdiv->antdiv_curcfg; - antdiv->antdiv_curcfg = curcfg; - antdiv->antdiv_laststatetsf = curtsf; - antdiv->antdiv_state = ATH_ANT_DIV_SCAN; - } - } - break; - - case ATH_ANT_DIV_SCAN: - if ((curtsf - antdiv->antdiv_laststatetsf) < - ATH_ANT_DIV_MIN_SCAN_US) - break; - - curcfg++; - if (curcfg == antdiv->antdiv_num_antcfg) - curcfg = 0; - - if (curcfg == antdiv->antdiv_bestcfg) { - ath_find_max_val(antdiv->antdiv_lastbrssi, - antdiv->antdiv_num_antcfg, &bestcfg); - if (!ath9k_hw_select_antconfig(ah, bestcfg)) { - antdiv->antdiv_bestcfg = bestcfg; - antdiv->antdiv_curcfg = bestcfg; - antdiv->antdiv_laststatetsf = curtsf; - antdiv->antdiv_state = ATH_ANT_DIV_IDLE; - } - } else { - if (!ath9k_hw_select_antconfig(ah, curcfg)) { - antdiv->antdiv_curcfg = curcfg; - antdiv->antdiv_laststatetsf = curtsf; - antdiv->antdiv_state = ATH_ANT_DIV_SCAN; - } - } - - break; - } -} - -/***********************/ -/* Descriptor Handling */ -/***********************/ - -/* - * Set up DMA descriptors - * - * This function will allocate both the DMA descriptor structure, and the - * buffers it contains. These are used to contain the descriptors used - * by the system. -*/ - -int ath_descdma_setup(struct ath_softc *sc, - struct ath_descdma *dd, - struct list_head *head, - const char *name, - int nbuf, - int ndesc) -{ -#define DS2PHYS(_dd, _ds) \ - ((_dd)->dd_desc_paddr + ((caddr_t)(_ds) - (caddr_t)(_dd)->dd_desc)) -#define ATH_DESC_4KB_BOUND_CHECK(_daddr) ((((_daddr) & 0xFFF) > 0xF7F) ? 1 : 0) -#define ATH_DESC_4KB_BOUND_NUM_SKIPPED(_len) ((_len) / 4096) - - struct ath_desc *ds; - struct ath_buf *bf; - int i, bsize, error; - - DPRINTF(sc, ATH_DBG_CONFIG, "%s: %s DMA: %u buffers %u desc/buf\n", - __func__, name, nbuf, ndesc); - - /* ath_desc must be a multiple of DWORDs */ - if ((sizeof(struct ath_desc) % 4) != 0) { - DPRINTF(sc, ATH_DBG_FATAL, "%s: ath_desc not DWORD aligned\n", - __func__); - ASSERT((sizeof(struct ath_desc) % 4) == 0); - error = -ENOMEM; - goto fail; - } - - dd->dd_name = name; - dd->dd_desc_len = sizeof(struct ath_desc) * nbuf * ndesc; - - /* - * Need additional DMA memory because we can't use - * descriptors that cross the 4K page boundary. Assume - * one skipped descriptor per 4K page. - */ - if (!(sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_4KB_SPLITTRANS)) { - u32 ndesc_skipped = - ATH_DESC_4KB_BOUND_NUM_SKIPPED(dd->dd_desc_len); - u32 dma_len; - - while (ndesc_skipped) { - dma_len = ndesc_skipped * sizeof(struct ath_desc); - dd->dd_desc_len += dma_len; - - ndesc_skipped = ATH_DESC_4KB_BOUND_NUM_SKIPPED(dma_len); - }; - } - - /* allocate descriptors */ - dd->dd_desc = pci_alloc_consistent(sc->pdev, - dd->dd_desc_len, - &dd->dd_desc_paddr); - if (dd->dd_desc == NULL) { - error = -ENOMEM; - goto fail; - } - ds = dd->dd_desc; - DPRINTF(sc, ATH_DBG_CONFIG, "%s: %s DMA map: %p (%u) -> %llx (%u)\n", - __func__, dd->dd_name, ds, (u32) dd->dd_desc_len, - ito64(dd->dd_desc_paddr), /*XXX*/(u32) dd->dd_desc_len); - - /* allocate buffers */ - bsize = sizeof(struct ath_buf) * nbuf; - bf = kmalloc(bsize, GFP_KERNEL); - if (bf == NULL) { - error = -ENOMEM; - goto fail2; - } - memset(bf, 0, bsize); - dd->dd_bufptr = bf; - - INIT_LIST_HEAD(head); - for (i = 0; i < nbuf; i++, bf++, ds += ndesc) { - bf->bf_desc = ds; - bf->bf_daddr = DS2PHYS(dd, ds); - - if (!(sc->sc_ah->ah_caps.hw_caps & - ATH9K_HW_CAP_4KB_SPLITTRANS)) { - /* - * Skip descriptor addresses which can cause 4KB - * boundary crossing (addr + length) with a 32 dword - * descriptor fetch. - */ - while (ATH_DESC_4KB_BOUND_CHECK(bf->bf_daddr)) { - ASSERT((caddr_t) bf->bf_desc < - ((caddr_t) dd->dd_desc + - dd->dd_desc_len)); - - ds += ndesc; - bf->bf_desc = ds; - bf->bf_daddr = DS2PHYS(dd, ds); - } - } - list_add_tail(&bf->list, head); - } - return 0; -fail2: - pci_free_consistent(sc->pdev, - dd->dd_desc_len, dd->dd_desc, dd->dd_desc_paddr); -fail: - memset(dd, 0, sizeof(*dd)); - return error; -#undef ATH_DESC_4KB_BOUND_CHECK -#undef ATH_DESC_4KB_BOUND_NUM_SKIPPED -#undef DS2PHYS -} - -/* - * Cleanup DMA descriptors - * - * This function will free the DMA block that was allocated for the descriptor - * pool. Since this was allocated as one "chunk", it is freed in the same - * manner. -*/ - -void ath_descdma_cleanup(struct ath_softc *sc, - struct ath_descdma *dd, - struct list_head *head) -{ - /* Free memory associated with descriptors */ - pci_free_consistent(sc->pdev, - dd->dd_desc_len, dd->dd_desc, dd->dd_desc_paddr); - - INIT_LIST_HEAD(head); - kfree(dd->dd_bufptr); - memset(dd, 0, sizeof(*dd)); -} - -/*************/ -/* Utilities */ -/*************/ - -int ath_get_hal_qnum(u16 queue, struct ath_softc *sc) -{ - int qnum; - - switch (queue) { - case 0: - qnum = sc->sc_haltype2q[ATH9K_WME_AC_VO]; - break; - case 1: - qnum = sc->sc_haltype2q[ATH9K_WME_AC_VI]; - break; - case 2: - qnum = sc->sc_haltype2q[ATH9K_WME_AC_BE]; - break; - case 3: - qnum = sc->sc_haltype2q[ATH9K_WME_AC_BK]; - break; - default: - qnum = sc->sc_haltype2q[ATH9K_WME_AC_BE]; - break; - } - - return qnum; -} - -int ath_get_mac80211_qnum(u32 queue, struct ath_softc *sc) -{ - int qnum; - - switch (queue) { - case ATH9K_WME_AC_VO: - qnum = 0; - break; - case ATH9K_WME_AC_VI: - qnum = 1; - break; - case ATH9K_WME_AC_BE: - qnum = 2; - break; - case ATH9K_WME_AC_BK: - qnum = 3; - break; - default: - qnum = -1; - break; - } - - return qnum; -} - - -/* - * Expand time stamp to TSF - * - * Extend 15-bit time stamp from rx descriptor to - * a full 64-bit TSF using the current h/w TSF. -*/ - -u64 ath_extend_tsf(struct ath_softc *sc, u32 rstamp) -{ - u64 tsf; - - tsf = ath9k_hw_gettsf64(sc->sc_ah); - if ((tsf & 0x7fff) < rstamp) - tsf -= 0x8000; - return (tsf & ~0x7fff) | rstamp; -} - -/* - * Set Default Antenna - * - * Call into the HAL to set the default antenna to use. Not really valid for - * MIMO technology. -*/ - -void ath_setdefantenna(void *context, u32 antenna) -{ - struct ath_softc *sc = (struct ath_softc *)context; - struct ath_hal *ah = sc->sc_ah; - - /* XXX block beacon interrupts */ - ath9k_hw_setantenna(ah, antenna); - sc->sc_defant = antenna; - sc->sc_rxotherant = 0; -} - -/* - * Set Slot Time - * - * This will wake up the chip if required, and set the slot time for the - * frame (maximum transmit time). Slot time is assumed to be already set - * in the ATH object member sc_slottime -*/ - -void ath_setslottime(struct ath_softc *sc) -{ - ath9k_hw_setslottime(sc->sc_ah, sc->sc_slottime); - sc->sc_updateslot = OK; -} diff --git a/drivers/net/wireless/ath9k/core.h b/drivers/net/wireless/ath9k/core.h index e6725567109..21ee0c24052 100644 --- a/drivers/net/wireless/ath9k/core.h +++ b/drivers/net/wireless/ath9k/core.h @@ -47,10 +47,6 @@ struct ath_node; -/******************/ -/* Utility macros */ -/******************/ - /* Macro to expand scalars to 64-bit objects */ #define ito64(x) (sizeof(x) == 8) ? \ @@ -86,11 +82,6 @@ struct ath_node; #define ATH_TXQ_SETUP(sc, i) ((sc)->sc_txqsetup & (1<= ((mul)/2)) ? ((x) + ((mul) - 1)) / (mul) : (x)/(mul)) -#define ATH_RSSI_OUT(x) \ - (((x) != ATH_RSSI_DUMMY_MARKER) ? \ - (ATH_EP_RND((x), ATH_RSSI_EP_MULTIPLIER)) : ATH_RSSI_DUMMY_MARKER) -#define ATH_RSSI_IN(x) \ - (ATH_EP_MUL((x), ATH_RSSI_EP_MULTIPLIER)) -#define ATH_LPF_RSSI(x, y, len) \ - ((x != ATH_RSSI_DUMMY_MARKER) ? \ - (((x) * ((len) - 1) + (y)) / (len)) : (y)) -#define ATH_RSSI_LPF(x, y) do { \ - if ((y) >= RSSI_LPF_THRESHOLD) \ - x = ATH_LPF_RSSI((x), \ - ATH_RSSI_IN((y)), ATH_RSSI_LPF_LEN); \ - } while (0) - +#define ATH_RSSI_DUMMY_MARKER 0x127 +#define ATH_RATE_DUMMY_MARKER 0 enum PROT_MODE { PROT_M_NONE = 0, @@ -748,12 +633,6 @@ enum PROT_MODE { PROT_M_CTSONLY }; -enum RATE_TYPE { - NORMAL_RATE = 0, - HALF_RATE, - QUARTER_RATE -}; - struct ath_ht_info { enum ath9k_ht_macmode tx_chan_width; u8 ext_chan_offset; @@ -881,27 +760,9 @@ struct ath_softc { struct ath_ani sc_ani; }; -int ath_init(u16 devid, struct ath_softc *sc); -int ath_open(struct ath_softc *sc, struct ath9k_channel *initial_chan); -void ath_stop(struct ath_softc *sc); -irqreturn_t ath_isr(int irq, void *dev); int ath_reset(struct ath_softc *sc, bool retry_tx); -int ath_set_channel(struct ath_softc *sc, struct ath9k_channel *hchan); - -/*********************/ -/* Utility Functions */ -/*********************/ - -void ath_key_reset(struct ath_softc *sc, u16 keyix, int freeslot); -int ath_keyset(struct ath_softc *sc, - u16 keyix, - struct ath9k_keyval *hk, - const u8 mac[ETH_ALEN]); int ath_get_hal_qnum(u16 queue, struct ath_softc *sc); int ath_get_mac80211_qnum(u32 queue, struct ath_softc *sc); -void ath_setslottime(struct ath_softc *sc); -void ath_update_txpow(struct ath_softc *sc); int ath_cabq_update(struct ath_softc *); -u64 ath_extend_tsf(struct ath_softc *sc, u32 rstamp); #endif /* CORE_H */ diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c index 54d89abce47..f226a4daef7 100644 --- a/drivers/net/wireless/ath9k/main.c +++ b/drivers/net/wireless/ath9k/main.c @@ -14,8 +14,6 @@ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ -/* mac80211 and PCI callbacks */ - #include #include "core.h" #include "reg.h" @@ -40,6 +38,580 @@ static struct pci_device_id ath_pci_id_table[] __devinitdata = { static void ath_detach(struct ath_softc *sc); +/* return bus cachesize in 4B word units */ + +static void bus_read_cachesize(struct ath_softc *sc, int *csz) +{ + u8 u8tmp; + + pci_read_config_byte(sc->pdev, PCI_CACHE_LINE_SIZE, (u8 *)&u8tmp); + *csz = (int)u8tmp; + + /* + * This check was put in to avoid "unplesant" consequences if + * the bootrom has not fully initialized all PCI devices. + * Sometimes the cache line size register is not set + */ + + if (*csz == 0) + *csz = DEFAULT_CACHELINE >> 2; /* Use the default size */ +} + +static void ath_setcurmode(struct ath_softc *sc, enum wireless_mode mode) +{ + sc->sc_curmode = mode; + /* + * All protection frames are transmited at 2Mb/s for + * 11g, otherwise at 1Mb/s. + * XXX select protection rate index from rate table. + */ + sc->sc_protrix = (mode == ATH9K_MODE_11G ? 1 : 0); +} + +static enum wireless_mode ath_chan2mode(struct ath9k_channel *chan) +{ + if (chan->chanmode == CHANNEL_A) + return ATH9K_MODE_11A; + else if (chan->chanmode == CHANNEL_G) + return ATH9K_MODE_11G; + else if (chan->chanmode == CHANNEL_B) + return ATH9K_MODE_11B; + else if (chan->chanmode == CHANNEL_A_HT20) + return ATH9K_MODE_11NA_HT20; + else if (chan->chanmode == CHANNEL_G_HT20) + return ATH9K_MODE_11NG_HT20; + else if (chan->chanmode == CHANNEL_A_HT40PLUS) + return ATH9K_MODE_11NA_HT40PLUS; + else if (chan->chanmode == CHANNEL_A_HT40MINUS) + return ATH9K_MODE_11NA_HT40MINUS; + else if (chan->chanmode == CHANNEL_G_HT40PLUS) + return ATH9K_MODE_11NG_HT40PLUS; + else if (chan->chanmode == CHANNEL_G_HT40MINUS) + return ATH9K_MODE_11NG_HT40MINUS; + + WARN_ON(1); /* should not get here */ + + return ATH9K_MODE_11B; +} + +static void ath_update_txpow(struct ath_softc *sc) +{ + struct ath_hal *ah = sc->sc_ah; + u32 txpow; + + if (sc->sc_curtxpow != sc->sc_config.txpowlimit) { + ath9k_hw_set_txpowerlimit(ah, sc->sc_config.txpowlimit); + /* read back in case value is clamped */ + ath9k_hw_getcapability(ah, ATH9K_CAP_TXPOW, 1, &txpow); + sc->sc_curtxpow = txpow; + } +} + +static u8 parse_mpdudensity(u8 mpdudensity) +{ + /* + * 802.11n D2.0 defined values for "Minimum MPDU Start Spacing": + * 0 for no restriction + * 1 for 1/4 us + * 2 for 1/2 us + * 3 for 1 us + * 4 for 2 us + * 5 for 4 us + * 6 for 8 us + * 7 for 16 us + */ + switch (mpdudensity) { + case 0: + return 0; + case 1: + case 2: + case 3: + /* Our lower layer calculations limit our precision to + 1 microsecond */ + return 1; + case 4: + return 2; + case 5: + return 4; + case 6: + return 8; + case 7: + return 16; + default: + return 0; + } +} + +static void ath_setup_rates(struct ath_softc *sc, enum ieee80211_band band) +{ + struct ath_rate_table *rate_table = NULL; + struct ieee80211_supported_band *sband; + struct ieee80211_rate *rate; + int i, maxrates; + + switch (band) { + case IEEE80211_BAND_2GHZ: + rate_table = sc->hw_rate_table[ATH9K_MODE_11G]; + break; + case IEEE80211_BAND_5GHZ: + rate_table = sc->hw_rate_table[ATH9K_MODE_11A]; + break; + default: + break; + } + + if (rate_table == NULL) + return; + + sband = &sc->sbands[band]; + rate = sc->rates[band]; + + if (rate_table->rate_cnt > ATH_RATE_MAX) + maxrates = ATH_RATE_MAX; + else + maxrates = rate_table->rate_cnt; + + for (i = 0; i < maxrates; i++) { + rate[i].bitrate = rate_table->info[i].ratekbps / 100; + rate[i].hw_value = rate_table->info[i].ratecode; + sband->n_bitrates++; + DPRINTF(sc, ATH_DBG_CONFIG, "%s: Rate: %2dMbps, ratecode: %2d\n", + __func__, rate[i].bitrate / 10, rate[i].hw_value); + } +} + +static int ath_setup_channels(struct ath_softc *sc) +{ + struct ath_hal *ah = sc->sc_ah; + int nchan, i, a = 0, b = 0; + u8 regclassids[ATH_REGCLASSIDS_MAX]; + u32 nregclass = 0; + struct ieee80211_supported_band *band_2ghz; + struct ieee80211_supported_band *band_5ghz; + struct ieee80211_channel *chan_2ghz; + struct ieee80211_channel *chan_5ghz; + struct ath9k_channel *c; + + /* Fill in ah->ah_channels */ + if (!ath9k_regd_init_channels(ah, ATH_CHAN_MAX, (u32 *)&nchan, + regclassids, ATH_REGCLASSIDS_MAX, + &nregclass, CTRY_DEFAULT, false, 1)) { + u32 rd = ah->ah_currentRD; + DPRINTF(sc, ATH_DBG_FATAL, + "%s: unable to collect channel list; " + "regdomain likely %u country code %u\n", + __func__, rd, CTRY_DEFAULT); + return -EINVAL; + } + + band_2ghz = &sc->sbands[IEEE80211_BAND_2GHZ]; + band_5ghz = &sc->sbands[IEEE80211_BAND_5GHZ]; + chan_2ghz = sc->channels[IEEE80211_BAND_2GHZ]; + chan_5ghz = sc->channels[IEEE80211_BAND_5GHZ]; + + for (i = 0; i < nchan; i++) { + c = &ah->ah_channels[i]; + if (IS_CHAN_2GHZ(c)) { + chan_2ghz[a].band = IEEE80211_BAND_2GHZ; + chan_2ghz[a].center_freq = c->channel; + chan_2ghz[a].max_power = c->maxTxPower; + + if (c->privFlags & CHANNEL_DISALLOW_ADHOC) + chan_2ghz[a].flags |= IEEE80211_CHAN_NO_IBSS; + if (c->channelFlags & CHANNEL_PASSIVE) + chan_2ghz[a].flags |= IEEE80211_CHAN_PASSIVE_SCAN; + + band_2ghz->n_channels = ++a; + + DPRINTF(sc, ATH_DBG_CONFIG, "%s: 2MHz channel: %d, " + "channelFlags: 0x%x\n", + __func__, c->channel, c->channelFlags); + } else if (IS_CHAN_5GHZ(c)) { + chan_5ghz[b].band = IEEE80211_BAND_5GHZ; + chan_5ghz[b].center_freq = c->channel; + chan_5ghz[b].max_power = c->maxTxPower; + + if (c->privFlags & CHANNEL_DISALLOW_ADHOC) + chan_5ghz[b].flags |= IEEE80211_CHAN_NO_IBSS; + if (c->channelFlags & CHANNEL_PASSIVE) + chan_5ghz[b].flags |= IEEE80211_CHAN_PASSIVE_SCAN; + + band_5ghz->n_channels = ++b; + + DPRINTF(sc, ATH_DBG_CONFIG, "%s: 5MHz channel: %d, " + "channelFlags: 0x%x\n", + __func__, c->channel, c->channelFlags); + } + } + + return 0; +} + +/* + * Set/change channels. If the channel is really being changed, it's done + * by reseting the chip. To accomplish this we must first cleanup any pending + * DMA, then restart stuff. +*/ +static int ath_set_channel(struct ath_softc *sc, struct ath9k_channel *hchan) +{ + struct ath_hal *ah = sc->sc_ah; + bool fastcc = true, stopped; + + if (sc->sc_flags & SC_OP_INVALID) + return -EIO; + + DPRINTF(sc, ATH_DBG_CONFIG, + "%s: %u (%u MHz) -> %u (%u MHz), cflags:%x\n", + __func__, + ath9k_hw_mhz2ieee(ah, sc->sc_ah->ah_curchan->channel, + sc->sc_ah->ah_curchan->channelFlags), + sc->sc_ah->ah_curchan->channel, + ath9k_hw_mhz2ieee(ah, hchan->channel, hchan->channelFlags), + hchan->channel, hchan->channelFlags); + + if (hchan->channel != sc->sc_ah->ah_curchan->channel || + hchan->channelFlags != sc->sc_ah->ah_curchan->channelFlags || + (sc->sc_flags & SC_OP_CHAINMASK_UPDATE) || + (sc->sc_flags & SC_OP_FULL_RESET)) { + int status; + /* + * This is only performed if the channel settings have + * actually changed. + * + * To switch channels clear any pending DMA operations; + * wait long enough for the RX fifo to drain, reset the + * hardware at the new frequency, and then re-enable + * the relevant bits of the h/w. + */ + ath9k_hw_set_interrupts(ah, 0); /* disable interrupts */ + ath_draintxq(sc, false); /* clear pending tx frames */ + stopped = ath_stoprecv(sc); /* turn off frame recv */ + + /* XXX: do not flush receive queue here. We don't want + * to flush data frames already in queue because of + * changing channel. */ + + if (!stopped || (sc->sc_flags & SC_OP_FULL_RESET)) + fastcc = false; + + spin_lock_bh(&sc->sc_resetlock); + if (!ath9k_hw_reset(ah, hchan, sc->sc_ht_info.tx_chan_width, + sc->sc_tx_chainmask, sc->sc_rx_chainmask, + sc->sc_ht_extprotspacing, fastcc, &status)) { + DPRINTF(sc, ATH_DBG_FATAL, + "%s: unable to reset channel %u (%uMhz) " + "flags 0x%x hal status %u\n", __func__, + ath9k_hw_mhz2ieee(ah, hchan->channel, + hchan->channelFlags), + hchan->channel, hchan->channelFlags, status); + spin_unlock_bh(&sc->sc_resetlock); + return -EIO; + } + spin_unlock_bh(&sc->sc_resetlock); + + sc->sc_flags &= ~SC_OP_CHAINMASK_UPDATE; + sc->sc_flags &= ~SC_OP_FULL_RESET; + + if (ath_startrecv(sc) != 0) { + DPRINTF(sc, ATH_DBG_FATAL, + "%s: unable to restart recv logic\n", __func__); + return -EIO; + } + + ath_setcurmode(sc, ath_chan2mode(hchan)); + ath_update_txpow(sc); + ath9k_hw_set_interrupts(ah, sc->sc_imask); + } + return 0; +} + +/* + * This routine performs the periodic noise floor calibration function + * that is used to adjust and optimize the chip performance. This + * takes environmental changes (location, temperature) into account. + * When the task is complete, it reschedules itself depending on the + * appropriate interval that was calculated. + */ +static void ath_ani_calibrate(unsigned long data) +{ + struct ath_softc *sc; + struct ath_hal *ah; + bool longcal = false; + bool shortcal = false; + bool aniflag = false; + unsigned int timestamp = jiffies_to_msecs(jiffies); + u32 cal_interval; + + sc = (struct ath_softc *)data; + ah = sc->sc_ah; + + /* + * don't calibrate when we're scanning. + * we are most likely not on our home channel. + */ + if (sc->rx_filter & FIF_BCN_PRBRESP_PROMISC) + return; + + /* Long calibration runs independently of short calibration. */ + if ((timestamp - sc->sc_ani.sc_longcal_timer) >= ATH_LONG_CALINTERVAL) { + longcal = true; + DPRINTF(sc, ATH_DBG_ANI, "%s: longcal @%lu\n", + __func__, jiffies); + sc->sc_ani.sc_longcal_timer = timestamp; + } + + /* Short calibration applies only while sc_caldone is false */ + if (!sc->sc_ani.sc_caldone) { + if ((timestamp - sc->sc_ani.sc_shortcal_timer) >= + ATH_SHORT_CALINTERVAL) { + shortcal = true; + DPRINTF(sc, ATH_DBG_ANI, "%s: shortcal @%lu\n", + __func__, jiffies); + sc->sc_ani.sc_shortcal_timer = timestamp; + sc->sc_ani.sc_resetcal_timer = timestamp; + } + } else { + if ((timestamp - sc->sc_ani.sc_resetcal_timer) >= + ATH_RESTART_CALINTERVAL) { + ath9k_hw_reset_calvalid(ah, ah->ah_curchan, + &sc->sc_ani.sc_caldone); + if (sc->sc_ani.sc_caldone) + sc->sc_ani.sc_resetcal_timer = timestamp; + } + } + + /* Verify whether we must check ANI */ + if ((timestamp - sc->sc_ani.sc_checkani_timer) >= + ATH_ANI_POLLINTERVAL) { + aniflag = true; + sc->sc_ani.sc_checkani_timer = timestamp; + } + + /* Skip all processing if there's nothing to do. */ + if (longcal || shortcal || aniflag) { + /* Call ANI routine if necessary */ + if (aniflag) + ath9k_hw_ani_monitor(ah, &sc->sc_halstats, + ah->ah_curchan); + + /* Perform calibration if necessary */ + if (longcal || shortcal) { + bool iscaldone = false; + + if (ath9k_hw_calibrate(ah, ah->ah_curchan, + sc->sc_rx_chainmask, longcal, + &iscaldone)) { + if (longcal) + sc->sc_ani.sc_noise_floor = + ath9k_hw_getchan_noise(ah, + ah->ah_curchan); + + DPRINTF(sc, ATH_DBG_ANI, + "%s: calibrate chan %u/%x nf: %d\n", + __func__, + ah->ah_curchan->channel, + ah->ah_curchan->channelFlags, + sc->sc_ani.sc_noise_floor); + } else { + DPRINTF(sc, ATH_DBG_ANY, + "%s: calibrate chan %u/%x failed\n", + __func__, + ah->ah_curchan->channel, + ah->ah_curchan->channelFlags); + } + sc->sc_ani.sc_caldone = iscaldone; + } + } + + /* + * Set timer interval based on previous results. + * The interval must be the shortest necessary to satisfy ANI, + * short calibration and long calibration. + */ + + cal_interval = ATH_ANI_POLLINTERVAL; + if (!sc->sc_ani.sc_caldone) + cal_interval = min(cal_interval, (u32)ATH_SHORT_CALINTERVAL); + + mod_timer(&sc->sc_ani.timer, jiffies + msecs_to_jiffies(cal_interval)); +} + +/* + * Update tx/rx chainmask. For legacy association, + * hard code chainmask to 1x1, for 11n association, use + * the chainmask configuration. + */ +static void ath_update_chainmask(struct ath_softc *sc, int is_ht) +{ + sc->sc_flags |= SC_OP_CHAINMASK_UPDATE; + if (is_ht) { + sc->sc_tx_chainmask = sc->sc_ah->ah_caps.tx_chainmask; + sc->sc_rx_chainmask = sc->sc_ah->ah_caps.rx_chainmask; + } else { + sc->sc_tx_chainmask = 1; + sc->sc_rx_chainmask = 1; + } + + DPRINTF(sc, ATH_DBG_CONFIG, "%s: tx chmask: %d, rx chmask: %d\n", + __func__, sc->sc_tx_chainmask, sc->sc_rx_chainmask); +} + +static void ath_node_attach(struct ath_softc *sc, struct ieee80211_sta *sta) +{ + struct ath_node *an; + + an = (struct ath_node *)sta->drv_priv; + + if (sc->sc_flags & SC_OP_TXAGGR) + ath_tx_node_init(sc, an); + + an->maxampdu = 1 << (IEEE80211_HTCAP_MAXRXAMPDU_FACTOR + + sta->ht_cap.ampdu_factor); + an->mpdudensity = parse_mpdudensity(sta->ht_cap.ampdu_density); +} + +static void ath_node_detach(struct ath_softc *sc, struct ieee80211_sta *sta) +{ + struct ath_node *an = (struct ath_node *)sta->drv_priv; + + if (sc->sc_flags & SC_OP_TXAGGR) + ath_tx_node_cleanup(sc, an); +} + +static void ath9k_tasklet(unsigned long data) +{ + struct ath_softc *sc = (struct ath_softc *)data; + u32 status = sc->sc_intrstatus; + + if (status & ATH9K_INT_FATAL) { + /* need a chip reset */ + ath_reset(sc, false); + return; + } else { + + if (status & + (ATH9K_INT_RX | ATH9K_INT_RXEOL | ATH9K_INT_RXORN)) { + spin_lock_bh(&sc->sc_rxflushlock); + ath_rx_tasklet(sc, 0); + spin_unlock_bh(&sc->sc_rxflushlock); + } + /* XXX: optimize this */ + if (status & ATH9K_INT_TX) + ath_tx_tasklet(sc); + } + + /* re-enable hardware interrupt */ + ath9k_hw_set_interrupts(sc->sc_ah, sc->sc_imask); +} + +static irqreturn_t ath_isr(int irq, void *dev) +{ + struct ath_softc *sc = dev; + struct ath_hal *ah = sc->sc_ah; + enum ath9k_int status; + bool sched = false; + + do { + if (sc->sc_flags & SC_OP_INVALID) { + /* + * The hardware is not ready/present, don't + * touch anything. Note this can happen early + * on if the IRQ is shared. + */ + return IRQ_NONE; + } + if (!ath9k_hw_intrpend(ah)) { /* shared irq, not for us */ + return IRQ_NONE; + } + + /* + * Figure out the reason(s) for the interrupt. Note + * that the hal returns a pseudo-ISR that may include + * bits we haven't explicitly enabled so we mask the + * value to insure we only process bits we requested. + */ + ath9k_hw_getisr(ah, &status); /* NB: clears ISR too */ + + status &= sc->sc_imask; /* discard unasked-for bits */ + + /* + * If there are no status bits set, then this interrupt was not + * for me (should have been caught above). + */ + if (!status) + return IRQ_NONE; + + sc->sc_intrstatus = status; + + if (status & ATH9K_INT_FATAL) { + /* need a chip reset */ + sched = true; + } else if (status & ATH9K_INT_RXORN) { + /* need a chip reset */ + sched = true; + } else { + if (status & ATH9K_INT_SWBA) { + /* schedule a tasklet for beacon handling */ + tasklet_schedule(&sc->bcon_tasklet); + } + if (status & ATH9K_INT_RXEOL) { + /* + * NB: the hardware should re-read the link when + * RXE bit is written, but it doesn't work + * at least on older hardware revs. + */ + sched = true; + } + + if (status & ATH9K_INT_TXURN) + /* bump tx trigger level */ + ath9k_hw_updatetxtriglevel(ah, true); + /* XXX: optimize this */ + if (status & ATH9K_INT_RX) + sched = true; + if (status & ATH9K_INT_TX) + sched = true; + if (status & ATH9K_INT_BMISS) + sched = true; + /* carrier sense timeout */ + if (status & ATH9K_INT_CST) + sched = true; + if (status & ATH9K_INT_MIB) { + /* + * Disable interrupts until we service the MIB + * interrupt; otherwise it will continue to + * fire. + */ + ath9k_hw_set_interrupts(ah, 0); + /* + * Let the hal handle the event. We assume + * it will clear whatever condition caused + * the interrupt. + */ + ath9k_hw_procmibevent(ah, &sc->sc_halstats); + ath9k_hw_set_interrupts(ah, sc->sc_imask); + } + if (status & ATH9K_INT_TIM_TIMER) { + if (!(ah->ah_caps.hw_caps & + ATH9K_HW_CAP_AUTOSLEEP)) { + /* Clear RxAbort bit so that we can + * receive frames */ + ath9k_hw_setrxabort(ah, 0); + sched = true; + } + } + } + } while (0); + + if (sched) { + /* turn off every interrupt except SWBA */ + ath9k_hw_set_interrupts(ah, (sc->sc_imask & ATH9K_INT_SWBA)); + tasklet_schedule(&sc->intr_tq); + } + + return IRQ_HANDLED; +} + static int ath_get_channel(struct ath_softc *sc, struct ieee80211_channel *chan) { @@ -90,6 +662,23 @@ static u32 ath_get_extchanmode(struct ath_softc *sc, return chanmode; } +static void ath_key_reset(struct ath_softc *sc, u16 keyix, int freeslot) +{ + ath9k_hw_keyreset(sc->sc_ah, keyix); + if (freeslot) + clear_bit(keyix, sc->sc_keymap); +} + +static int ath_keyset(struct ath_softc *sc, u16 keyix, + struct ath9k_keyval *hk, const u8 mac[ETH_ALEN]) +{ + bool status; + + status = ath9k_hw_set_keycache_entry(sc->sc_ah, + keyix, hk, mac, false); + + return status != false; +} static int ath_setkey_tkip(struct ath_softc *sc, struct ieee80211_key_conf *key, @@ -327,20 +916,6 @@ static void ath9k_bss_assoc_info(struct ath_softc *sc, } } -void ath_get_beaconconfig(struct ath_softc *sc, - int if_id, - struct ath_beacon_config *conf) -{ - struct ieee80211_hw *hw = sc->hw; - - /* fill in beacon config data */ - - conf->beacon_interval = hw->conf.beacon_int; - conf->listen_interval = 100; - conf->dtim_count = 1; - conf->bmiss_timeout = ATH_DEFAULT_BMISS_LIMIT * conf->listen_interval; -} - /********************************/ /* LED functions */ /********************************/ @@ -722,6 +1297,244 @@ static void ath_detach(struct ath_softc *sc) ath9k_hw_detach(sc->sc_ah); } +static int ath_init(u16 devid, struct ath_softc *sc) +{ + struct ath_hal *ah = NULL; + int status; + int error = 0, i; + int csz = 0; + + /* XXX: hardware will not be ready until ath_open() being called */ + sc->sc_flags |= SC_OP_INVALID; + sc->sc_debug = DBG_DEFAULT; + + spin_lock_init(&sc->sc_resetlock); + tasklet_init(&sc->intr_tq, ath9k_tasklet, (unsigned long)sc); + tasklet_init(&sc->bcon_tasklet, ath9k_beacon_tasklet, + (unsigned long)sc); + + /* + * Cache line size is used to size and align various + * structures used to communicate with the hardware. + */ + bus_read_cachesize(sc, &csz); + /* XXX assert csz is non-zero */ + sc->sc_cachelsz = csz << 2; /* convert to bytes */ + + ah = ath9k_hw_attach(devid, sc, sc->mem, &status); + if (ah == NULL) { + DPRINTF(sc, ATH_DBG_FATAL, + "%s: unable to attach hardware; HAL status %u\n", + __func__, status); + error = -ENXIO; + goto bad; + } + sc->sc_ah = ah; + + /* Get the hardware key cache size. */ + sc->sc_keymax = ah->ah_caps.keycache_size; + if (sc->sc_keymax > ATH_KEYMAX) { + DPRINTF(sc, ATH_DBG_KEYCACHE, + "%s: Warning, using only %u entries in %u key cache\n", + __func__, ATH_KEYMAX, sc->sc_keymax); + sc->sc_keymax = ATH_KEYMAX; + } + + /* + * Reset the key cache since some parts do not + * reset the contents on initial power up. + */ + for (i = 0; i < sc->sc_keymax; i++) + ath9k_hw_keyreset(ah, (u16) i); + /* + * Mark key cache slots associated with global keys + * as in use. If we knew TKIP was not to be used we + * could leave the +32, +64, and +32+64 slots free. + * XXX only for splitmic. + */ + for (i = 0; i < IEEE80211_WEP_NKID; i++) { + set_bit(i, sc->sc_keymap); + set_bit(i + 32, sc->sc_keymap); + set_bit(i + 64, sc->sc_keymap); + set_bit(i + 32 + 64, sc->sc_keymap); + } + + /* Collect the channel list using the default country code */ + + error = ath_setup_channels(sc); + if (error) + goto bad; + + /* default to MONITOR mode */ + sc->sc_ah->ah_opmode = ATH9K_M_MONITOR; + + /* Setup rate tables */ + + ath_rate_attach(sc); + ath_setup_rates(sc, IEEE80211_BAND_2GHZ); + ath_setup_rates(sc, IEEE80211_BAND_5GHZ); + + /* + * Allocate hardware transmit queues: one queue for + * beacon frames and one data queue for each QoS + * priority. Note that the hal handles reseting + * these queues at the needed time. + */ + sc->sc_bhalq = ath_beaconq_setup(ah); + if (sc->sc_bhalq == -1) { + DPRINTF(sc, ATH_DBG_FATAL, + "%s: unable to setup a beacon xmit queue\n", __func__); + error = -EIO; + goto bad2; + } + sc->sc_cabq = ath_txq_setup(sc, ATH9K_TX_QUEUE_CAB, 0); + if (sc->sc_cabq == NULL) { + DPRINTF(sc, ATH_DBG_FATAL, + "%s: unable to setup CAB xmit queue\n", __func__); + error = -EIO; + goto bad2; + } + + sc->sc_config.cabqReadytime = ATH_CABQ_READY_TIME; + ath_cabq_update(sc); + + for (i = 0; i < ARRAY_SIZE(sc->sc_haltype2q); i++) + sc->sc_haltype2q[i] = -1; + + /* Setup data queues */ + /* NB: ensure BK queue is the lowest priority h/w queue */ + if (!ath_tx_setup(sc, ATH9K_WME_AC_BK)) { + DPRINTF(sc, ATH_DBG_FATAL, + "%s: unable to setup xmit queue for BK traffic\n", + __func__); + error = -EIO; + goto bad2; + } + + if (!ath_tx_setup(sc, ATH9K_WME_AC_BE)) { + DPRINTF(sc, ATH_DBG_FATAL, + "%s: unable to setup xmit queue for BE traffic\n", + __func__); + error = -EIO; + goto bad2; + } + if (!ath_tx_setup(sc, ATH9K_WME_AC_VI)) { + DPRINTF(sc, ATH_DBG_FATAL, + "%s: unable to setup xmit queue for VI traffic\n", + __func__); + error = -EIO; + goto bad2; + } + if (!ath_tx_setup(sc, ATH9K_WME_AC_VO)) { + DPRINTF(sc, ATH_DBG_FATAL, + "%s: unable to setup xmit queue for VO traffic\n", + __func__); + error = -EIO; + goto bad2; + } + + /* Initializes the noise floor to a reasonable default value. + * Later on this will be updated during ANI processing. */ + + sc->sc_ani.sc_noise_floor = ATH_DEFAULT_NOISE_FLOOR; + setup_timer(&sc->sc_ani.timer, ath_ani_calibrate, (unsigned long)sc); + + if (ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER, + ATH9K_CIPHER_TKIP, NULL)) { + /* + * Whether we should enable h/w TKIP MIC. + * XXX: if we don't support WME TKIP MIC, then we wouldn't + * report WMM capable, so it's always safe to turn on + * TKIP MIC in this case. + */ + ath9k_hw_setcapability(sc->sc_ah, ATH9K_CAP_TKIP_MIC, + 0, 1, NULL); + } + + /* + * Check whether the separate key cache entries + * are required to handle both tx+rx MIC keys. + * With split mic keys the number of stations is limited + * to 27 otherwise 59. + */ + if (ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER, + ATH9K_CIPHER_TKIP, NULL) + && ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER, + ATH9K_CIPHER_MIC, NULL) + && ath9k_hw_getcapability(ah, ATH9K_CAP_TKIP_SPLIT, + 0, NULL)) + sc->sc_splitmic = 1; + + /* turn on mcast key search if possible */ + if (!ath9k_hw_getcapability(ah, ATH9K_CAP_MCAST_KEYSRCH, 0, NULL)) + (void)ath9k_hw_setcapability(ah, ATH9K_CAP_MCAST_KEYSRCH, 1, + 1, NULL); + + sc->sc_config.txpowlimit = ATH_TXPOWER_MAX; + sc->sc_config.txpowlimit_override = 0; + + /* 11n Capabilities */ + if (ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT) { + sc->sc_flags |= SC_OP_TXAGGR; + sc->sc_flags |= SC_OP_RXAGGR; + } + + sc->sc_tx_chainmask = ah->ah_caps.tx_chainmask; + sc->sc_rx_chainmask = ah->ah_caps.rx_chainmask; + + ath9k_hw_setcapability(ah, ATH9K_CAP_DIVERSITY, 1, true, NULL); + sc->sc_defant = ath9k_hw_getdefantenna(ah); + + ath9k_hw_getmac(ah, sc->sc_myaddr); + if (ah->ah_caps.hw_caps & ATH9K_HW_CAP_BSSIDMASK) { + ath9k_hw_getbssidmask(ah, sc->sc_bssidmask); + ATH_SET_VAP_BSSID_MASK(sc->sc_bssidmask); + ath9k_hw_setbssidmask(ah, sc->sc_bssidmask); + } + + sc->sc_slottime = ATH9K_SLOT_TIME_9; /* default to short slot time */ + + /* initialize beacon slots */ + for (i = 0; i < ARRAY_SIZE(sc->sc_bslot); i++) + sc->sc_bslot[i] = ATH_IF_ID_ANY; + + /* save MISC configurations */ + sc->sc_config.swBeaconProcess = 1; + +#ifdef CONFIG_SLOW_ANT_DIV + /* range is 40 - 255, we use something in the middle */ + ath_slow_ant_div_init(&sc->sc_antdiv, sc, 0x127); +#endif + + /* setup channels and rates */ + + sc->sbands[IEEE80211_BAND_2GHZ].channels = + sc->channels[IEEE80211_BAND_2GHZ]; + sc->sbands[IEEE80211_BAND_2GHZ].bitrates = + sc->rates[IEEE80211_BAND_2GHZ]; + sc->sbands[IEEE80211_BAND_2GHZ].band = IEEE80211_BAND_2GHZ; + + if (test_bit(ATH9K_MODE_11A, sc->sc_ah->ah_caps.wireless_modes)) { + sc->sbands[IEEE80211_BAND_5GHZ].channels = + sc->channels[IEEE80211_BAND_5GHZ]; + sc->sbands[IEEE80211_BAND_5GHZ].bitrates = + sc->rates[IEEE80211_BAND_5GHZ]; + sc->sbands[IEEE80211_BAND_5GHZ].band = IEEE80211_BAND_5GHZ; + } + + return 0; +bad2: + /* cleanup tx queues */ + for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) + if (ATH_TXQ_SETUP(sc, i)) + ath_tx_cleanupq(sc, &sc->sc_txq[i]); +bad: + if (ah) + ath9k_hw_detach(ah); + + return error; +} + static int ath_attach(u16 devid, struct ath_softc *sc) { struct ieee80211_hw *hw = sc->hw; @@ -810,11 +1623,243 @@ bad: return error; } +int ath_reset(struct ath_softc *sc, bool retry_tx) +{ + struct ath_hal *ah = sc->sc_ah; + int status; + int error = 0; + + ath9k_hw_set_interrupts(ah, 0); + ath_draintxq(sc, retry_tx); + ath_stoprecv(sc); + ath_flushrecv(sc); + + spin_lock_bh(&sc->sc_resetlock); + if (!ath9k_hw_reset(ah, sc->sc_ah->ah_curchan, + sc->sc_ht_info.tx_chan_width, + sc->sc_tx_chainmask, sc->sc_rx_chainmask, + sc->sc_ht_extprotspacing, false, &status)) { + DPRINTF(sc, ATH_DBG_FATAL, + "%s: unable to reset hardware; hal status %u\n", + __func__, status); + error = -EIO; + } + spin_unlock_bh(&sc->sc_resetlock); + + if (ath_startrecv(sc) != 0) + DPRINTF(sc, ATH_DBG_FATAL, + "%s: unable to start recv logic\n", __func__); + + /* + * We may be doing a reset in response to a request + * that changes the channel so update any state that + * might change as a result. + */ + ath_setcurmode(sc, ath_chan2mode(sc->sc_ah->ah_curchan)); + + ath_update_txpow(sc); + + if (sc->sc_flags & SC_OP_BEACONS) + ath_beacon_config(sc, ATH_IF_ID_ANY); /* restart beacons */ + + ath9k_hw_set_interrupts(ah, sc->sc_imask); + + if (retry_tx) { + int i; + for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) { + if (ATH_TXQ_SETUP(sc, i)) { + spin_lock_bh(&sc->sc_txq[i].axq_lock); + ath_txq_schedule(sc, &sc->sc_txq[i]); + spin_unlock_bh(&sc->sc_txq[i].axq_lock); + } + } + } + + return error; +} + +/* + * This function will allocate both the DMA descriptor structure, and the + * buffers it contains. These are used to contain the descriptors used + * by the system. +*/ +int ath_descdma_setup(struct ath_softc *sc, struct ath_descdma *dd, + struct list_head *head, const char *name, + int nbuf, int ndesc) +{ +#define DS2PHYS(_dd, _ds) \ + ((_dd)->dd_desc_paddr + ((caddr_t)(_ds) - (caddr_t)(_dd)->dd_desc)) +#define ATH_DESC_4KB_BOUND_CHECK(_daddr) ((((_daddr) & 0xFFF) > 0xF7F) ? 1 : 0) +#define ATH_DESC_4KB_BOUND_NUM_SKIPPED(_len) ((_len) / 4096) + + struct ath_desc *ds; + struct ath_buf *bf; + int i, bsize, error; + + DPRINTF(sc, ATH_DBG_CONFIG, "%s: %s DMA: %u buffers %u desc/buf\n", + __func__, name, nbuf, ndesc); + + /* ath_desc must be a multiple of DWORDs */ + if ((sizeof(struct ath_desc) % 4) != 0) { + DPRINTF(sc, ATH_DBG_FATAL, "%s: ath_desc not DWORD aligned\n", + __func__); + ASSERT((sizeof(struct ath_desc) % 4) == 0); + error = -ENOMEM; + goto fail; + } + + dd->dd_name = name; + dd->dd_desc_len = sizeof(struct ath_desc) * nbuf * ndesc; + + /* + * Need additional DMA memory because we can't use + * descriptors that cross the 4K page boundary. Assume + * one skipped descriptor per 4K page. + */ + if (!(sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_4KB_SPLITTRANS)) { + u32 ndesc_skipped = + ATH_DESC_4KB_BOUND_NUM_SKIPPED(dd->dd_desc_len); + u32 dma_len; + + while (ndesc_skipped) { + dma_len = ndesc_skipped * sizeof(struct ath_desc); + dd->dd_desc_len += dma_len; + + ndesc_skipped = ATH_DESC_4KB_BOUND_NUM_SKIPPED(dma_len); + }; + } + + /* allocate descriptors */ + dd->dd_desc = pci_alloc_consistent(sc->pdev, + dd->dd_desc_len, + &dd->dd_desc_paddr); + if (dd->dd_desc == NULL) { + error = -ENOMEM; + goto fail; + } + ds = dd->dd_desc; + DPRINTF(sc, ATH_DBG_CONFIG, "%s: %s DMA map: %p (%u) -> %llx (%u)\n", + __func__, dd->dd_name, ds, (u32) dd->dd_desc_len, + ito64(dd->dd_desc_paddr), /*XXX*/(u32) dd->dd_desc_len); + + /* allocate buffers */ + bsize = sizeof(struct ath_buf) * nbuf; + bf = kmalloc(bsize, GFP_KERNEL); + if (bf == NULL) { + error = -ENOMEM; + goto fail2; + } + memset(bf, 0, bsize); + dd->dd_bufptr = bf; + + INIT_LIST_HEAD(head); + for (i = 0; i < nbuf; i++, bf++, ds += ndesc) { + bf->bf_desc = ds; + bf->bf_daddr = DS2PHYS(dd, ds); + + if (!(sc->sc_ah->ah_caps.hw_caps & + ATH9K_HW_CAP_4KB_SPLITTRANS)) { + /* + * Skip descriptor addresses which can cause 4KB + * boundary crossing (addr + length) with a 32 dword + * descriptor fetch. + */ + while (ATH_DESC_4KB_BOUND_CHECK(bf->bf_daddr)) { + ASSERT((caddr_t) bf->bf_desc < + ((caddr_t) dd->dd_desc + + dd->dd_desc_len)); + + ds += ndesc; + bf->bf_desc = ds; + bf->bf_daddr = DS2PHYS(dd, ds); + } + } + list_add_tail(&bf->list, head); + } + return 0; +fail2: + pci_free_consistent(sc->pdev, + dd->dd_desc_len, dd->dd_desc, dd->dd_desc_paddr); +fail: + memset(dd, 0, sizeof(*dd)); + return error; +#undef ATH_DESC_4KB_BOUND_CHECK +#undef ATH_DESC_4KB_BOUND_NUM_SKIPPED +#undef DS2PHYS +} + +void ath_descdma_cleanup(struct ath_softc *sc, + struct ath_descdma *dd, + struct list_head *head) +{ + pci_free_consistent(sc->pdev, + dd->dd_desc_len, dd->dd_desc, dd->dd_desc_paddr); + + INIT_LIST_HEAD(head); + kfree(dd->dd_bufptr); + memset(dd, 0, sizeof(*dd)); +} + +int ath_get_hal_qnum(u16 queue, struct ath_softc *sc) +{ + int qnum; + + switch (queue) { + case 0: + qnum = sc->sc_haltype2q[ATH9K_WME_AC_VO]; + break; + case 1: + qnum = sc->sc_haltype2q[ATH9K_WME_AC_VI]; + break; + case 2: + qnum = sc->sc_haltype2q[ATH9K_WME_AC_BE]; + break; + case 3: + qnum = sc->sc_haltype2q[ATH9K_WME_AC_BK]; + break; + default: + qnum = sc->sc_haltype2q[ATH9K_WME_AC_BE]; + break; + } + + return qnum; +} + +int ath_get_mac80211_qnum(u32 queue, struct ath_softc *sc) +{ + int qnum; + + switch (queue) { + case ATH9K_WME_AC_VO: + qnum = 0; + break; + case ATH9K_WME_AC_VI: + qnum = 1; + break; + case ATH9K_WME_AC_BE: + qnum = 2; + break; + case ATH9K_WME_AC_BK: + qnum = 3; + break; + default: + qnum = -1; + break; + } + + return qnum; +} + +/**********************/ +/* mac80211 callbacks */ +/**********************/ + static int ath9k_start(struct ieee80211_hw *hw) { struct ath_softc *sc = hw->priv; struct ieee80211_channel *curchan = hw->conf.channel; - int error = 0, pos; + struct ath9k_channel *init_channel; + int error = 0, pos, status; DPRINTF(sc, ATH_DBG_CONFIG, "%s: Starting driver with " "initial channel: %d MHz\n", __func__, curchan->center_freq); @@ -827,24 +1872,103 @@ static int ath9k_start(struct ieee80211_hw *hw) if (pos == -1) { DPRINTF(sc, ATH_DBG_FATAL, "%s: Invalid channel\n", __func__); error = -EINVAL; - goto exit; + goto error; } sc->sc_ah->ah_channels[pos].chanmode = (curchan->band == IEEE80211_BAND_2GHZ) ? CHANNEL_G : CHANNEL_A; + init_channel = &sc->sc_ah->ah_channels[pos]; - error = ath_open(sc, &sc->sc_ah->ah_channels[pos]); - if (error) { + /* Reset SERDES registers */ + ath9k_hw_configpcipowersave(sc->sc_ah, 0); + + /* + * The basic interface to setting the hardware in a good + * state is ``reset''. On return the hardware is known to + * be powered up and with interrupts disabled. This must + * be followed by initialization of the appropriate bits + * and then setup of the interrupt mask. + */ + spin_lock_bh(&sc->sc_resetlock); + if (!ath9k_hw_reset(sc->sc_ah, init_channel, + sc->sc_ht_info.tx_chan_width, + sc->sc_tx_chainmask, sc->sc_rx_chainmask, + sc->sc_ht_extprotspacing, false, &status)) { DPRINTF(sc, ATH_DBG_FATAL, - "%s: Unable to complete ath_open\n", __func__); - goto exit; + "%s: unable to reset hardware; hal status %u " + "(freq %u flags 0x%x)\n", __func__, status, + init_channel->channel, init_channel->channelFlags); + error = -EIO; + spin_unlock_bh(&sc->sc_resetlock); + goto error; } + spin_unlock_bh(&sc->sc_resetlock); + + /* + * This is needed only to setup initial state + * but it's best done after a reset. + */ + ath_update_txpow(sc); + + /* + * Setup the hardware after reset: + * The receive engine is set going. + * Frame transmit is handled entirely + * in the frame output path; there's nothing to do + * here except setup the interrupt mask. + */ + if (ath_startrecv(sc) != 0) { + DPRINTF(sc, ATH_DBG_FATAL, + "%s: unable to start recv logic\n", __func__); + error = -EIO; + goto error; + } + + /* Setup our intr mask. */ + sc->sc_imask = ATH9K_INT_RX | ATH9K_INT_TX + | ATH9K_INT_RXEOL | ATH9K_INT_RXORN + | ATH9K_INT_FATAL | ATH9K_INT_GLOBAL; + + if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_GTT) + sc->sc_imask |= ATH9K_INT_GTT; + + if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT) + sc->sc_imask |= ATH9K_INT_CST; + + /* + * Enable MIB interrupts when there are hardware phy counters. + * Note we only do this (at the moment) for station mode. + */ + if (ath9k_hw_phycounters(sc->sc_ah) && + ((sc->sc_ah->ah_opmode == ATH9K_M_STA) || + (sc->sc_ah->ah_opmode == ATH9K_M_IBSS))) + sc->sc_imask |= ATH9K_INT_MIB; + /* + * Some hardware processes the TIM IE and fires an + * interrupt when the TIM bit is set. For hardware + * that does, if not overridden by configuration, + * enable the TIM interrupt when operating as station. + */ + if ((sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_ENHANCEDPM) && + (sc->sc_ah->ah_opmode == ATH9K_M_STA) && + !sc->sc_config.swBeaconProcess) + sc->sc_imask |= ATH9K_INT_TIM; + + ath_setcurmode(sc, ath_chan2mode(init_channel)); + + sc->sc_flags &= ~SC_OP_INVALID; + + /* Disable BMISS interrupt when we're not associated */ + sc->sc_imask &= ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS); + ath9k_hw_set_interrupts(sc->sc_ah, sc->sc_imask); + + ieee80211_wake_queues(sc->hw); #if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE) error = ath_start_rfkill_poll(sc); #endif -exit: +error: return error; } @@ -911,7 +2035,30 @@ static void ath9k_stop(struct ieee80211_hw *hw) return; } - ath_stop(sc); + DPRINTF(sc, ATH_DBG_CONFIG, "%s: Cleaning up\n", __func__); + + ieee80211_stop_queues(sc->hw); + + /* make sure h/w will not generate any interrupt + * before setting the invalid flag. */ + ath9k_hw_set_interrupts(sc->sc_ah, 0); + + if (!(sc->sc_flags & SC_OP_INVALID)) { + ath_draintxq(sc, false); + ath_stoprecv(sc); + ath9k_hw_phy_disable(sc->sc_ah); + } else + sc->sc_rxlink = NULL; + +#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE) + if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_RFSILENT) + cancel_delayed_work_sync(&sc->rf_kill.rfkill_poll); +#endif + /* disable HAL and put h/w to sleep */ + ath9k_hw_disable(sc->sc_ah); + ath9k_hw_configpcipowersave(sc->sc_ah, 1); + + sc->sc_flags |= SC_OP_INVALID; DPRINTF(sc, ATH_DBG_CONFIG, "%s: Driver halt\n", __func__); } diff --git a/drivers/net/wireless/ath9k/rc.c b/drivers/net/wireless/ath9k/rc.c index 7d1913d48d3..93dfea897ff 100644 --- a/drivers/net/wireless/ath9k/rc.c +++ b/drivers/net/wireless/ath9k/rc.c @@ -1401,7 +1401,6 @@ static void ath_tx_status(void *priv, struct ieee80211_supported_band *sband, struct ath_softc *sc = priv; struct ath_rate_priv *ath_rc_priv = priv_sta; struct ath_tx_info_priv *tx_info_priv = NULL; - struct ath_node *an; struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); struct ieee80211_hdr *hdr; int final_ts_idx, tx_status = 0, is_underrun = 0; @@ -1410,21 +1409,15 @@ static void ath_tx_status(void *priv, struct ieee80211_supported_band *sband, hdr = (struct ieee80211_hdr *)skb->data; fc = hdr->frame_control; tx_info_priv = ATH_TX_INFO_PRIV(tx_info); - an = (struct ath_node *)sta->drv_priv; final_ts_idx = tx_info_priv->tx.ts_rateindex; - if (!an || !priv_sta || !ieee80211_is_data(fc) || + if (!priv_sta || !ieee80211_is_data(fc) || !tx_info_priv->update_rc) goto exit; if (tx_info_priv->tx.ts_status & ATH9K_TXERR_FILT) goto exit; - if (tx_info_priv->tx.ts_rssi > 0) { - ATH_RSSI_LPF(an->an_chainmask_sel.tx_avgrssi, - tx_info_priv->tx.ts_rssi); - } - /* * If underrun error is seen assume it as an excessive retry only * if prefetch trigger level have reached the max (0x3f for 5416) diff --git a/drivers/net/wireless/ath9k/recv.c b/drivers/net/wireless/ath9k/recv.c index 6eae2542392..743ad228b83 100644 --- a/drivers/net/wireless/ath9k/recv.c +++ b/drivers/net/wireless/ath9k/recv.c @@ -55,6 +55,28 @@ static void ath_rx_buf_link(struct ath_softc *sc, struct ath_buf *bf) ath9k_hw_rxena(ah); } +static void ath_setdefantenna(struct ath_softc *sc, u32 antenna) +{ + /* XXX block beacon interrupts */ + ath9k_hw_setantenna(sc->sc_ah, antenna); + sc->sc_defant = antenna; + sc->sc_rxotherant = 0; +} + +/* + * Extend 15-bit time stamp from rx descriptor to + * a full 64-bit TSF using the current h/w TSF. +*/ +static u64 ath_extend_tsf(struct ath_softc *sc, u32 rstamp) +{ + u64 tsf; + + tsf = ath9k_hw_gettsf64(sc->sc_ah); + if ((tsf & 0x7fff) < rstamp) + tsf -= 0x8000; + return (tsf & ~0x7fff) | rstamp; +} + static struct sk_buff *ath_rxbuf_alloc(struct ath_softc *sc, u32 len) { struct sk_buff *skb; diff --git a/drivers/net/wireless/ath9k/xmit.c b/drivers/net/wireless/ath9k/xmit.c index dad81a9df15..3de60c51e5f 100644 --- a/drivers/net/wireless/ath9k/xmit.c +++ b/drivers/net/wireless/ath9k/xmit.c @@ -147,6 +147,19 @@ static int ath_aggr_query(struct ath_softc *sc, struct ath_node *an, u8 tidno) return 0; } +static void ath_get_beaconconfig(struct ath_softc *sc, int if_id, + struct ath_beacon_config *conf) +{ + struct ieee80211_hw *hw = sc->hw; + + /* fill in beacon config data */ + + conf->beacon_interval = hw->conf.beacon_int; + conf->listen_interval = 100; + conf->dtim_count = 1; + conf->bmiss_timeout = ATH_DEFAULT_BMISS_LIMIT * conf->listen_interval; +} + /* Calculate Atheros packet type from IEEE80211 packet header */ static enum ath9k_pkt_type get_hw_packet_type(struct sk_buff *skb) @@ -522,7 +535,6 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf) struct ath_desc *ds = bf->bf_desc; struct ath_desc *lastds = bf->bf_lastbf->bf_desc; struct ath9k_11n_rate_series series[4]; - struct ath_node *an = NULL; struct sk_buff *skb; struct ieee80211_tx_info *tx_info; struct ieee80211_tx_rate *rates; @@ -540,9 +552,6 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf) tx_info = IEEE80211_SKB_CB(skb); rates = tx_info->control.rates; - if (tx_info->control.sta) - an = (struct ath_node *)tx_info->control.sta->drv_priv; - if (ieee80211_has_morefrags(fc) || (le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG)) { rates[1].count = rates[2].count = rates[3].count = 0; @@ -632,10 +641,7 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf) (rates[i].flags & IEEE80211_TX_RC_SHORT_GI), bf_isshpreamble(bf)); - if (bf_isht(bf) && an) - series[i].ChSel = ath_chainmask_sel_logic(sc, an); - else - series[i].ChSel = sc->sc_tx_chainmask; + series[i].ChSel = sc->sc_tx_chainmask; if (rtsctsena) series[i].RateFlags |= ATH9K_RATESERIES_RTS_CTS; -- 2.20.1