From fe58d016e396fc685364b5a1743faf83c1fb8103 Mon Sep 17 00:00:00 2001 From: Alexander Aring Date: Sun, 2 Nov 2014 04:18:34 +0100 Subject: [PATCH] at86rf230: add default channel settings This patch sets the reset state channels accoridng at86rf2xx datasheets. We don't need to set the default page here which is zero on all chips. Signed-off-by: Alexander Aring Signed-off-by: Marcel Holtmann --- drivers/net/ieee802154/at86rf230.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c index 624080d97209..f68ebba91b10 100644 --- a/drivers/net/ieee802154/at86rf230.c +++ b/drivers/net/ieee802154/at86rf230.c @@ -1427,6 +1427,7 @@ at86rf230_detect_device(struct at86rf230_local *lp) chip = "at86rf231"; lp->data = &at86rf231_data; lp->hw->phy->channels_supported[0] = 0x7FFF800; + lp->hw->phy->current_channel = 11; break; case 7: chip = "at86rf212"; @@ -1435,6 +1436,7 @@ at86rf230_detect_device(struct at86rf230_local *lp) lp->hw->flags |= IEEE802154_HW_LBT; lp->hw->phy->channels_supported[0] = 0x00007FF; lp->hw->phy->channels_supported[2] = 0x00007FF; + lp->hw->phy->current_channel = 5; } else { rc = -ENOTSUPP; } @@ -1443,6 +1445,7 @@ at86rf230_detect_device(struct at86rf230_local *lp) chip = "at86rf233"; lp->data = &at86rf233_data; lp->hw->phy->channels_supported[0] = 0x7FFF800; + lp->hw->phy->current_channel = 13; break; default: chip = "unkown"; -- 2.20.1