From fe348cb628e6a78cc1e82fe64404c9a304ed9c12 Mon Sep 17 00:00:00 2001 From: Kalle Valo Date: Thu, 24 Sep 2009 11:02:51 -0700 Subject: [PATCH] at76c50x-usb: set firmware and hardware version in wiphy Set firmware and hardware version in wiphy so that user space can access it. (Modification from original in favor of cfg80211 ethtool support. -- JWL) Cc: Kalle Valo Signed-off-by: John W. Linville --- drivers/net/wireless/at76c50x-usb.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/net/wireless/at76c50x-usb.c b/drivers/net/wireless/at76c50x-usb.c index 8e1a55dec351..e559dc960552 100644 --- a/drivers/net/wireless/at76c50x-usb.c +++ b/drivers/net/wireless/at76c50x-usb.c @@ -2217,6 +2217,8 @@ static struct ieee80211_supported_band at76_supported_band = { static int at76_init_new_device(struct at76_priv *priv, struct usb_interface *interface) { + struct wiphy *wiphy; + size_t len; int ret; /* set up the endpoint information */ @@ -2254,6 +2256,7 @@ static int at76_init_new_device(struct at76_priv *priv, priv->device_unplugged = 0; /* mac80211 initialisation */ + wiphy = priv->hw->wiphy; priv->hw->wiphy->max_scan_ssids = 1; priv->hw->wiphy->max_scan_ie_len = 0; priv->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION); @@ -2265,6 +2268,13 @@ static int at76_init_new_device(struct at76_priv *priv, SET_IEEE80211_DEV(priv->hw, &interface->dev); SET_IEEE80211_PERM_ADDR(priv->hw, priv->mac_addr); + len = sizeof(wiphy->fw_version); + snprintf(wiphy->fw_version, len, "%d.%d.%d-%d", + priv->fw_version.major, priv->fw_version.minor, + priv->fw_version.patch, priv->fw_version.build); + + wiphy->hw_version = priv->board_type; + ret = ieee80211_register_hw(priv->hw); if (ret) { printk(KERN_ERR "cannot register mac80211 hw (status %d)!\n", -- 2.20.1