From fe2baf87a82dd44f74cfc6e24adc8b8bdfb37bb6 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 15 May 2012 16:27:30 -0700 Subject: [PATCH] USB: spcp8x5.c: remove dbg() usage dbg() is a usb-serial specific macro. This patch converts the spcp8x5.c driver to use dev_dbg() instead to tie into the dynamic debug infrastructure. CC: Rusty Russell CC: Alan Stern CC: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/spcp8x5.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c index 1fc1cab5a4ad..cad608984710 100644 --- a/drivers/usb/serial/spcp8x5.c +++ b/drivers/usb/serial/spcp8x5.c @@ -425,7 +425,7 @@ static void spcp8x5_set_termios(struct tty_struct *tty, if (i < 0) dev_err(&port->dev, "Set UART format %#x failed (error = %d)\n", uartdata, i); - dbg("0x21:0x40:0:0 %d", i); + dev_dbg(&port->dev, "0x21:0x40:0:0 %d\n", i); if (cflag & CRTSCTS) { /* enable hardware flow control */ @@ -569,15 +569,19 @@ static int spcp8x5_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; - dbg("%s (%d) cmd = 0x%04x", __func__, port->number, cmd); + + dev_dbg(&port->dev, "%s (%d) cmd = 0x%04x\n", __func__, + port->number, cmd); switch (cmd) { case TIOCMIWAIT: - dbg("%s (%d) TIOCMIWAIT", __func__, port->number); + dev_dbg(&port->dev, "%s (%d) TIOCMIWAIT\n", __func__, + port->number); return spcp8x5_wait_modem_info(port, arg); default: - dbg("%s not supported = 0x%04x", __func__, cmd); + dev_dbg(&port->dev, "%s not supported = 0x%04x", __func__, + cmd); break; } -- 2.20.1