From fdfb0f94bfb71ce31f5417b2f6362e43b0b847f0 Mon Sep 17 00:00:00 2001 From: Wright Feng Date: Thu, 3 Aug 2017 17:37:57 +0800 Subject: [PATCH] brcmfmac: set wpa_auth to WPA_AUTH_DISABLED in AP/OPEN security mode When setting wpa_auth to WPA_AUTH_NONE(1) in AP mode with WEP security, firmware will set privacy bit and add WPA OUI in VENDOR IE in beacon and probe response. The security type in softAP beacons confuse the supplicant in client side, and the user client will see [WPA-?] in supplicant scan result. So we set WPA_AUTH_DISABLED in softAP mode with OPEN security. Signed-off-by: Wright Feng Acked-by: Arend van Spriel Signed-off-by: Kalle Valo --- .../net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c index 7e689c86d565..579089a340f6 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c @@ -3940,6 +3940,7 @@ brcmf_cfg80211_flush_pmksa(struct wiphy *wiphy, struct net_device *ndev) static s32 brcmf_configure_opensecurity(struct brcmf_if *ifp) { s32 err; + s32 wpa_val; /* set auth */ err = brcmf_fil_bsscfg_int_set(ifp, "auth", 0); @@ -3954,7 +3955,11 @@ static s32 brcmf_configure_opensecurity(struct brcmf_if *ifp) return err; } /* set upper-layer auth */ - err = brcmf_fil_bsscfg_int_set(ifp, "wpa_auth", WPA_AUTH_NONE); + if (brcmf_is_ibssmode(ifp->vif)) + wpa_val = WPA_AUTH_NONE; + else + wpa_val = WPA_AUTH_DISABLED; + err = brcmf_fil_bsscfg_int_set(ifp, "wpa_auth", wpa_val); if (err < 0) { brcmf_err("wpa_auth error %d\n", err); return err; -- 2.20.1