From fdcba53e2d58272bcdb5f1fad694602ccf02ad46 Mon Sep 17 00:00:00 2001 From: Rainer Weikusat Date: Wed, 3 Jan 2007 15:36:25 +0100 Subject: [PATCH] fix for bugzilla #7544 (keyspan USB-to-serial converter) At least the Keyspan USA-19HS USB-to-serial converter supports two different configurations, one where the input endpoints have interrupt transfer type and one where they are bulk endpoints. The default UHCI configuration uses the interrupt input endpoints. The keyspan driver, OTOH, assumes that the device has only bulk endpoints (all URBs are initialized by calling usb_fill_bulk_urb in keyspan.c/ keyspan_setup_urb). This causes the interval field of the input URBs to have a value of zero instead of one, which 'accidentally' worked with Linux at least up to 2.6.17.11 but stopped to with 2.6.18, which changed the UHCI support code handling URBs for interrupt endpoints. The patch below modifies to driver to initialize its input URBs either as interrupt or as bulk URBs, depending on the transfertype contained in the associated endpoint descriptor (only tested with the default configuration) enabling the driver to again receive data from the serial converter. Greg K-H reworked the patch. Signed-off-by: Rainer Weikusat Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/keyspan.c | 49 +++++++++++++++++++++++++++++++++--- 1 file changed, 45 insertions(+), 4 deletions(-) diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index 9d2fdfd6865f..e6966f12ed5a 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -1275,11 +1275,31 @@ static int keyspan_fake_startup (struct usb_serial *serial) } /* Helper functions used by keyspan_setup_urbs */ +static struct usb_endpoint_descriptor const *find_ep(struct usb_serial const *serial, + int endpoint) +{ + struct usb_host_interface *iface_desc; + struct usb_endpoint_descriptor *ep; + int i; + + iface_desc = serial->interface->cur_altsetting; + for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { + ep = &iface_desc->endpoint[i].desc; + if (ep->bEndpointAddress == endpoint) + return ep; + } + dev_warn(&serial->interface->dev, "found no endpoint descriptor for " + "endpoint %x\n", endpoint); + return NULL; +} + static struct urb *keyspan_setup_urb (struct usb_serial *serial, int endpoint, int dir, void *ctx, char *buf, int len, void (*callback)(struct urb *)) { struct urb *urb; + struct usb_endpoint_descriptor const *ep_desc; + char const *ep_type_name; if (endpoint == -1) return NULL; /* endpoint not needed */ @@ -1291,11 +1311,32 @@ static struct urb *keyspan_setup_urb (struct usb_serial *serial, int endpoint, return NULL; } - /* Fill URB using supplied data. */ - usb_fill_bulk_urb(urb, serial->dev, - usb_sndbulkpipe(serial->dev, endpoint) | dir, - buf, len, callback, ctx); + ep_desc = find_ep(serial, endpoint); + if (!ep_desc) { + /* leak the urb, something's wrong and the callers don't care */ + return urb; + } + if (usb_endpoint_xfer_int(ep_desc)) { + ep_type_name = "INT"; + usb_fill_int_urb(urb, serial->dev, + usb_sndintpipe(serial->dev, endpoint) | dir, + buf, len, callback, ctx, + ep_desc->bInterval); + } else if (usb_endpoint_xfer_bulk(ep_desc)) { + ep_type_name = "BULK"; + usb_fill_bulk_urb(urb, serial->dev, + usb_sndbulkpipe(serial->dev, endpoint) | dir, + buf, len, callback, ctx); + } else { + dev_warn(&serial->interface->dev, + "unsupported endpoint type %x\n", + ep_desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK); + usb_free_urb(urb); + return NULL; + } + dbg("%s - using urb %p for %s endpoint %x", + __func__, urb, ep_type_name, endpoint); return urb; } -- 2.20.1