From fdc8c4adb6a465b5873df97fcbd1cb332ade019b Mon Sep 17 00:00:00 2001 From: Valentin Longchamp Date: Thu, 15 Dec 2016 14:22:28 +0100 Subject: [PATCH] powerpc/corenet: add support for the kmcent2 board This board is built around Freescale's T1040 SoC. The peripherals used by this design are: - DDR3 RAM with SPD support - parallel NOR Flash as boot medium - 1 PCIe bus (PCIe1 x1) - 3 FMAN Ethernet devices (FMAN1 DTSEC1/2/5) - 4 IFC bus devices: - NOR flash - NAND flash - QRIO reset/power mgmt CPLD - BFTIC chassis management CPLD - 2 I2C buses - 1 SPI bus - HDLC bus with the QE's UCC1 - last but not least, the mandatory serial port The board can be used with the corenet32_smp_defconfig. Signed-off-by: Valentin Longchamp Signed-off-by: Scott Wood --- arch/powerpc/boot/dts/fsl/kmcent2.dts | 303 ++++++++++++++++++ arch/powerpc/platforms/85xx/corenet_generic.c | 1 + 2 files changed, 304 insertions(+) create mode 100644 arch/powerpc/boot/dts/fsl/kmcent2.dts diff --git a/arch/powerpc/boot/dts/fsl/kmcent2.dts b/arch/powerpc/boot/dts/fsl/kmcent2.dts new file mode 100644 index 000000000000..47afa438602e --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/kmcent2.dts @@ -0,0 +1,303 @@ +/* + * Keymile kmcent2 Device Tree Source, based on T1040RDB DTS + * + * (C) Copyright 2016 + * Valentin Longchamp, Keymile AG, valentin.longchamp@keymile.com + * + * Copyright 2014 - 2015 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "t104xsi-pre.dtsi" + +/ { + model = "keymile,kmcent2"; + compatible = "keymile,kmcent2"; + + aliases { + front_phy = &front_phy; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + size = <0 0x1000000>; + alignment = <0 0x1000000>; + }; + qman_fqd: qman-fqd { + size = <0 0x400000>; + alignment = <0 0x400000>; + }; + qman_pfdr: qman-pfdr { + size = <0 0x2000000>; + alignment = <0 0x2000000>; + }; + }; + + ifc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x2000>; + ranges = <0 0 0xf 0xe8000000 0x04000000 + 1 0 0xf 0xfa000000 0x00010000 + 2 0 0xf 0xfb000000 0x00010000 + 4 0 0xf 0xc0000000 0x08000000 + 6 0 0xf 0xd0000000 0x08000000 + 7 0 0xf 0xd8000000 0x08000000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x04000000>; + bank-width = <2>; + device-width = <2>; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ifc-nand"; + reg = <0x1 0x0 0x10000>; + }; + + board-control@2,0 { + compatible = "keymile,qriox"; + reg = <0x2 0x0 0x80>; + }; + + chassis-mgmt@6,0 { + compatible = "keymile,bfticu"; + reg = <6 0 0x100>; + interrupt-controller; + interrupt-parent = <&mpic>; + interrupts = <11 1 0 0>; + #interrupt-cells = <1>; + }; + + }; + + memory { + device_type = "memory"; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01072000>; + }; + + bportals: bman-portals@ff4000000 { + ranges = <0x0 0xf 0xf4000000 0x2000000>; + }; + + qportals: qman-portals@ff6000000 { + ranges = <0x0 0xf 0xf6000000 0x2000000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + + spi@110000 { + network-clock@1 { + compatible = "zarlink,zl30364"; + reg = <1>; + spi-max-frequency = <1000000>; + }; + }; + + sdhc@114000 { + status = "disabled"; + }; + + i2c@118000 { + clock-frequency = <100000>; + + mux@70 { + compatible = "nxp,pca9547"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@54 { + compatible = "24c02"; + reg = <0x54>; + pagesize = <2>; + read-only; + label = "ddr3-spd"; + }; + }; + + i2c@7 { + reg = <7>; + #address-cells = <1>; + #size-cells = <0>; + + temp-sensor@48 { + compatible = "national,lm75"; + reg = <0x48>; + label = "SENSOR_0"; + }; + temp-sensor@4a { + compatible = "national,lm75"; + reg = <0x4a>; + label = "SENSOR_2"; + }; + temp-sensor@4b { + compatible = "national,lm75"; + reg = <0x4b>; + label = "SENSOR_3"; + }; + }; + }; + }; + + i2c@118100 { + clock-frequency = <100000>; + + eeprom@50 { + compatible = "atmel,24c08"; + reg = <0x50>; + pagesize = <16>; + }; + + eeprom@54 { + compatible = "atmel,24c08"; + reg = <0x54>; + pagesize = <16>; + }; + }; + + i2c@119000 { + status = "disabled"; + }; + + i2c@119100 { + status = "disabled"; + }; + + serial2: serial@11d500 { + status = "disabled"; + }; + + serial3: serial@11d600 { + status = "disabled"; + }; + + usb0: usb@210000 { + status = "disabled"; + }; + usb1: usb@211000 { + status = "disabled"; + }; + + display@180000 { + status = "disabled"; + }; + + sata@220000 { + status = "disabled"; + }; + sata@221000 { + status = "disabled"; + }; + + fman@400000 { + ethernet@e0000 { + fixed-link = <0 1 1000 0 0>; + phy-connection-type = "sgmii"; + }; + + ethernet@e2000 { + fixed-link = <1 1 1000 0 0>; + phy-connection-type = "sgmii"; + }; + + ethernet@e4000 { + status = "disabled"; + }; + + ethernet@e6000 { + status = "disabled"; + }; + + ethernet@e8000 { + phy-handle = <&front_phy>; + phy-connection-type = "rgmii"; + }; + + mdio0: mdio@fc000 { + front_phy: ethernet-phy@11 { + reg = <0x11>; + }; + }; + }; + }; + + + pci0: pcie@ffe240000 { + reg = <0xf 0xfe240000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci1: pcie@ffe250000 { + status = "disabled"; + }; + + pci2: pcie@ffe260000 { + status = "disabled"; + }; + + pci3: pcie@ffe270000 { + status = "disabled"; + }; + + qe: qe@ffe140000 { + ranges = <0x0 0xf 0xfe140000 0x40000>; + reg = <0xf 0xfe140000 0 0x480>; + brg-frequency = <0>; + bus-frequency = <0>; + + si1: si@700 { + compatible = "fsl,t1040-qe-si"; + reg = <0x700 0x80>; + }; + + siram1: siram@1000 { + compatible = "fsl,t1040-qe-siram"; + reg = <0x1000 0x800>; + }; + + ucc_hdlc: ucc@2000 { + device_type = "hdlc"; + compatible = "fsl,ucc-hdlc"; + rx-clock-name = "clk9"; + tx-clock-name = "clk9"; + fsl,tx-timeslot-mask = <0xfffffffe>; + fsl,rx-timeslot-mask = <0xfffffffe>; + fsl,siram-entry-id = <0>; + }; + }; +}; + +#include "t1040si-post.dtsi" diff --git a/arch/powerpc/platforms/85xx/corenet_generic.c b/arch/powerpc/platforms/85xx/corenet_generic.c index 6c0ba75fb256..ac191a7a1337 100644 --- a/arch/powerpc/platforms/85xx/corenet_generic.c +++ b/arch/powerpc/platforms/85xx/corenet_generic.c @@ -157,6 +157,7 @@ static const char * const boards[] __initconst = { "fsl,T1040RDB", "fsl,T1042RDB", "fsl,T1042RDB_PI", + "keymile,kmcent2", "keymile,kmcoge4", "varisys,CYRUS", NULL -- 2.20.1