From fbdbab72969b48367dcf5f0d42112b6f78fae794 Mon Sep 17 00:00:00 2001 From: Jemma Denson Date: Tue, 5 May 2015 18:31:10 -0300 Subject: [PATCH] [media] cx24120: More coding style fixes Signed-off-by: Jemma Denson Signed-off-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb-frontends/cx24120.c | 22 ++++++++++++++-------- 1 file changed, 14 insertions(+), 8 deletions(-) diff --git a/drivers/media/dvb-frontends/cx24120.c b/drivers/media/dvb-frontends/cx24120.c index acdda036fe13..2876b8aae90a 100644 --- a/drivers/media/dvb-frontends/cx24120.c +++ b/drivers/media/dvb-frontends/cx24120.c @@ -160,7 +160,8 @@ static int cx24120_readreg(struct cx24120_state *state, u8 reg) int ret; u8 buf = 0; struct i2c_msg msg[] = { - { .addr = state->config->i2c_addr, + { + .addr = state->config->i2c_addr, .flags = 0, .len = 1, .buf = ® @@ -488,7 +489,8 @@ static int cx24120_diseqc_send_burst(struct dvb_frontend *fe, struct cx24120_state *state = fe->demodulator_priv; struct cx24120_cmd cmd; - /* Yes, cmd.len is set to zero. The old driver + /* + * Yes, cmd.len is set to zero. The old driver * didn't specify any len, but also had a * memset 0 before every use of the cmd struct * which would have set it to zero. @@ -671,9 +673,11 @@ static int cx24120_read_status(struct dvb_frontend *fe, fe_status_t *status) if (lock & CX24120_HAS_LOCK) *status |= FE_HAS_LOCK; - /* TODO: is FE_HAS_SYNC in the right place? + /* + * TODO: is FE_HAS_SYNC in the right place? * Other cx241xx drivers have this slightly - * different */ + * different + */ state->fe_status = *status; cx24120_get_stats(state); @@ -695,7 +699,8 @@ static int cx24120_read_status(struct dvb_frontend *fe, fe_status_t *status) return 0; } -/* FEC & modulation lookup table +/* + * FEC & modulation lookup table * Used for decoding the REG_FECMODE register * once tuned in. */ @@ -775,14 +780,15 @@ static int cx24120_get_fec(struct dvb_frontend *fe) return 0; } -/* Clock ratios lookup table +/* + * Clock ratios lookup table * * Values obtained from much larger table in old driver * which had numerous entries which would never match. * * There's probably some way of calculating these but I * can't determine the pattern -*/ + */ static struct cx24120_clock_ratios_table { fe_delivery_system_t delsys; fe_pilot_t pilot; @@ -935,7 +941,7 @@ static struct cx24120_modfec_table { fe_code_rate_t fec; u8 val; } modfec_table[] = { -/*delsys mod fec val */ + /*delsys mod fec val */ { SYS_DVBS, QPSK, FEC_1_2, 0x2e }, { SYS_DVBS, QPSK, FEC_2_3, 0x2f }, { SYS_DVBS, QPSK, FEC_3_4, 0x30 }, -- 2.20.1