From fb734eeebf5aed8a0f06fa19df92817666039b41 Mon Sep 17 00:00:00 2001 From: Prabhakar Kushwaha Date: Mon, 21 Apr 2014 17:04:28 +0530 Subject: [PATCH] powerpc/mpc85xx:Add initial device tree support of T104x The QorIQ T1040/T1042 processor support four integrated 64-bit e5500 PA processor cores with high-performance data path acceleration architecture and network peripheral interfaces required for networking & telecommunications. T1042 personality is a reduced personality of T1040 without Integrated 8-port Gigabit Ethernet switch. The T1040/T1042 SoC includes the following function and features: - Four e5500 cores, each with a private 256 KB L2 cache - 256 KB shared L3 CoreNet platform cache (CPC) - Interconnect CoreNet platform - 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving support - Data Path Acceleration Architecture (DPAA) incorporating acceleration for the following functions: - Packet parsing, classification, and distribution - Queue management for scheduling, packet sequencing, and congestion management - Cryptography Acceleration (SEC 5.0) - RegEx Pattern Matching Acceleration (PME 2.2) - IEEE Std 1588 support - Hardware buffer management for buffer allocation and deallocation - Ethernet interfaces - Integrated 8-port Gigabit Ethernet switch (T1040 only) - Four 1 Gbps Ethernet controllers - Two RGMII interfaces or one RGMII and one MII interfaces - High speed peripheral interfaces - Four PCI Express 2.0 controllers running at up to 5 GHz - Two SATA controllers supporting 1.5 and 3.0 Gb/s operation - Upto two QSGMII interface - Upto six SGMII interface supporting 1000 Mbps - One SGMII interface supporting upto 2500 Mbps - Additional peripheral interfaces - Two USB 2.0 controllers with integrated PHY - SD/eSDHC/eMMC - eSPI controller - Four I2C controllers - Four UARTs - Four GPIO controllers - Integrated flash controller (IFC) - Change this to LCD/ HDMI interface (DIU) with 12 bit dual data rate - TDM interface - Multicore programmable interrupt controller (PIC) - Two 8-channel DMA engines - Single source clocking implementation - Deep Sleep power implementaion (wakeup from GPIO/Timer/Ethernet/USB) Signed-off-by: Poonam Aggrwal Signed-off-by: Priyanka Jain Signed-off-by: Varun Sethi Signed-off-by: Prabhakar Kushwaha Signed-off-by: Scott Wood --- arch/powerpc/boot/dts/fsl/t1040si-post.dtsi | 430 ++++++++++++++++++++ arch/powerpc/boot/dts/fsl/t1042si-post.dtsi | 37 ++ arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi | 104 +++++ 3 files changed, 571 insertions(+) create mode 100644 arch/powerpc/boot/dts/fsl/t1040si-post.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/t1042si-post.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi diff --git a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi new file mode 100644 index 000000000000..12e597eea3c8 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi @@ -0,0 +1,430 @@ +/* + * T1040 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&ifc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,ifc", "simple-bus"; + interrupts = <25 2 0 0>; +}; + +&pci0 { + compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + interrupts = <20 2 0 0>; + fsl,iommu-parent = <&pamu0>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <20 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 40 1 0 0 + 0000 0 0 2 &mpic 1 1 0 0 + 0000 0 0 3 &mpic 2 1 0 0 + 0000 0 0 4 &mpic 3 1 0 0 + >; + }; +}; + +&pci1 { + compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 0xff>; + interrupts = <21 2 0 0>; + fsl,iommu-parent = <&pamu0>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <21 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 41 1 0 0 + 0000 0 0 2 &mpic 5 1 0 0 + 0000 0 0 3 &mpic 6 1 0 0 + 0000 0 0 4 &mpic 7 1 0 0 + >; + }; +}; + +&pci2 { + compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + interrupts = <22 2 0 0>; + fsl,iommu-parent = <&pamu0>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <22 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 42 1 0 0 + 0000 0 0 2 &mpic 9 1 0 0 + 0000 0 0 3 &mpic 10 1 0 0 + 0000 0 0 4 &mpic 11 1 0 0 + >; + }; +}; + +&pci3 { + compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + interrupts = <23 2 0 0>; + fsl,iommu-parent = <&pamu0>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <23 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 43 1 0 0 + 0000 0 0 2 &mpic 0 1 0 0 + 0000 0 0 3 &mpic 4 1 0 0 + 0000 0 0 4 &mpic 8 1 0 0 + >; + }; +}; + +&dcsr { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,dcsr", "simple-bus"; + + dcsr-epu@0 { + compatible = "fsl,t1040-dcsr-epu", "fsl,dcsr-epu"; + interrupts = <52 2 0 0 + 84 2 0 0 + 85 2 0 0>; + reg = <0x0 0x1000>; + }; + dcsr-npc { + compatible = "fsl,t1040-dcsr-cnpc", "fsl,dcsr-cnpc"; + reg = <0x1000 0x1000 0x1002000 0x10000>; + }; + dcsr-nxc@2000 { + compatible = "fsl,dcsr-nxc"; + reg = <0x2000 0x1000>; + }; + dcsr-corenet { + compatible = "fsl,dcsr-corenet"; + reg = <0x8000 0x1000 0x1A000 0x1000>; + }; + dcsr-dpaa@9000 { + compatible = "fsl,t1040-dcsr-dpaa", "fsl,dcsr-dpaa"; + reg = <0x9000 0x1000>; + }; + dcsr-ocn@11000 { + compatible = "fsl,t1040-dcsr-ocn", "fsl,dcsr-ocn"; + reg = <0x11000 0x1000>; + }; + dcsr-ddr@12000 { + compatible = "fsl,dcsr-ddr"; + dev-handle = <&ddr1>; + reg = <0x12000 0x1000>; + }; + dcsr-nal@18000 { + compatible = "fsl,t1040-dcsr-nal", "fsl,dcsr-nal"; + reg = <0x18000 0x1000>; + }; + dcsr-rcpm@22000 { + compatible = "fsl,t1040-dcsr-rcpm", "fsl,dcsr-rcpm"; + reg = <0x22000 0x1000>; + }; + dcsr-snpc@30000 { + compatible = "fsl,t1040-dcsr-snpc", "fsl,dcsr-snpc"; + reg = <0x30000 0x1000 0x1022000 0x10000>; + }; + dcsr-snpc@31000 { + compatible = "fsl,t1040-dcsr-snpc", "fsl,dcsr-snpc"; + reg = <0x31000 0x1000 0x1042000 0x10000>; + }; + dcsr-cpu-sb-proxy@100000 { + compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu0>; + reg = <0x100000 0x1000 0x101000 0x1000>; + }; + dcsr-cpu-sb-proxy@108000 { + compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu1>; + reg = <0x108000 0x1000 0x109000 0x1000>; + }; + dcsr-cpu-sb-proxy@110000 { + compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu2>; + reg = <0x110000 0x1000 0x111000 0x1000>; + }; + dcsr-cpu-sb-proxy@118000 { + compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu3>; + reg = <0x118000 0x1000 0x119000 0x1000>; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + + soc-sram-error { + compatible = "fsl,soc-sram-error"; + interrupts = <16 2 1 29>; + }; + + corenet-law@0 { + compatible = "fsl,corenet-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <16>; + }; + + ddr1: memory-controller@8000 { + compatible = "fsl,qoriq-memory-controller-v5.0", + "fsl,qoriq-memory-controller"; + reg = <0x8000 0x1000>; + interrupts = <16 2 1 23>; + }; + + cpc: l3-cache-controller@10000 { + compatible = "fsl,t1040-l3-cache-controller", "cache"; + reg = <0x10000 0x1000>; + interrupts = <16 2 1 27>; + }; + + corenet-cf@18000 { + compatible = "fsl,corenet2-cf", "fsl,corenet-cf"; + reg = <0x18000 0x1000>; + interrupts = <16 2 1 31>; + fsl,ccf-num-csdids = <32>; + fsl,ccf-num-snoopids = <32>; + }; + + iommu@20000 { + compatible = "fsl,pamu-v1.0", "fsl,pamu"; + reg = <0x20000 0x1000>; + ranges = <0 0x20000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + interrupts = < + 24 2 0 0 + 16 2 1 30>; + pamu0: pamu@0 { + reg = <0 0x1000>; + fsl,primary-cache-geometry = <128 1>; + fsl,secondary-cache-geometry = <16 2>; + }; + }; + +/include/ "qoriq-mpic.dtsi" + + guts: global-utilities@e0000 { + compatible = "fsl,t1040-device-config", "fsl,qoriq-device-config-2.0"; + reg = <0xe0000 0xe00>; + fsl,has-rstcr; + fsl,liodn-bits = <12>; + }; + + clockgen: global-utilities@e1000 { + compatible = "fsl,t1040-clockgen", "fsl,qoriq-clockgen-2.0"; + ranges = <0x0 0xe1000 0x1000>; + reg = <0xe1000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + sysclk: sysclk { + #clock-cells = <0>; + compatible = "fsl,qoriq-sysclk-2.0"; + clock-output-names = "sysclk", "fixed-clock"; + }; + + + pll0: pll0@800 { + #clock-cells = <1>; + reg = <0x800 4>; + compatible = "fsl,qoriq-core-pll-2.0"; + clocks = <&sysclk>; + clock-output-names = "pll0", "pll0-div2", "pll0-div4"; + }; + + pll1: pll1@820 { + #clock-cells = <1>; + reg = <0x820 4>; + compatible = "fsl,qoriq-core-pll-2.0"; + clocks = <&sysclk>; + clock-output-names = "pll1", "pll1-div2", "pll1-div4"; + }; + + mux0: mux0@0 { + #clock-cells = <0>; + reg = <0x0 4>; + compatible = "fsl,qoriq-core-mux-2.0"; + clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>, + <&pll1 0>, <&pll1 1>, <&pll1 2>; + clock-names = "pll0", "pll0-div2", "pll1-div4", + "pll1", "pll1-div2", "pll1-div4"; + clock-output-names = "cmux0"; + }; + + mux1: mux1@20 { + #clock-cells = <0>; + reg = <0x20 4>; + compatible = "fsl,qoriq-core-mux-2.0"; + clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>, + <&pll1 0>, <&pll1 1>, <&pll1 2>; + clock-names = "pll0", "pll0-div2", "pll1-div4", + "pll1", "pll1-div2", "pll1-div4"; + clock-output-names = "cmux1"; + }; + + mux2: mux2@40 { + #clock-cells = <0>; + reg = <0x40 4>; + compatible = "fsl,qoriq-core-mux-2.0"; + clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>, + <&pll1 0>, <&pll1 1>, <&pll1 2>; + clock-names = "pll0", "pll0-div2", "pll1-div4", + "pll1", "pll1-div2", "pll1-div4"; + clock-output-names = "cmux2"; + }; + + mux3: mux3@60 { + #clock-cells = <0>; + reg = <0x60 4>; + compatible = "fsl,qoriq-core-mux-2.0"; + clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>, + <&pll1 0>, <&pll1 1>, <&pll1 2>; + clock-names = "pll0_0", "pll0_1", "pll0_2", + "pll1_0", "pll1_1", "pll1_2"; + clock-output-names = "cmux3"; + }; + }; + + rcpm: global-utilities@e2000 { + compatible = "fsl,t1040-rcpm", "fsl,qoriq-rcpm-2.0"; + reg = <0xe2000 0x1000>; + }; + + sfp: sfp@e8000 { + compatible = "fsl,t1040-sfp"; + reg = <0xe8000 0x1000>; + }; + + serdes: serdes@ea000 { + compatible = "fsl,t1040-serdes"; + reg = <0xea000 0x4000>; + }; + +/include/ "elo3-dma-0.dtsi" +/include/ "elo3-dma-1.dtsi" +/include/ "qoriq-espi-0.dtsi" + spi@110000 { + fsl,espi-num-chipselects = <4>; + }; + +/include/ "qoriq-esdhc-0.dtsi" + sdhc@114000 { + compatible = "fsl,t1040-esdhc", "fsl,esdhc"; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */ + sdhci,auto-cmd12; + }; +/include/ "qoriq-i2c-0.dtsi" +/include/ "qoriq-i2c-1.dtsi" +/include/ "qoriq-duart-0.dtsi" +/include/ "qoriq-duart-1.dtsi" +/include/ "qoriq-gpio-0.dtsi" +/include/ "qoriq-gpio-1.dtsi" +/include/ "qoriq-gpio-2.dtsi" +/include/ "qoriq-gpio-3.dtsi" +/include/ "qoriq-usb2-mph-0.dtsi" + usb0: usb@210000 { + compatible = "fsl-usb2-mph-v2.4", "fsl-usb2-mph"; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */ + phy_type = "utmi"; + port0; + }; +/include/ "qoriq-usb2-dr-0.dtsi" + usb1: usb@211000 { + compatible = "fsl-usb2-dr-v2.4", "fsl-usb2-dr"; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */ + dr_mode = "host"; + phy_type = "utmi"; + }; + + display@180000 { + compatible = "fsl,t1040-diu", "fsl,diu"; + reg = <0x180000 1000>; + interrupts = <74 2 0 0>; + }; + +/include/ "qoriq-sata2-0.dtsi" + sata@220000 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */ + }; +/include/ "qoriq-sata2-1.dtsi" + sata@221000 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */ + }; +/include/ "qoriq-sec5.0-0.dtsi" +}; diff --git a/arch/powerpc/boot/dts/fsl/t1042si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1042si-post.dtsi new file mode 100644 index 000000000000..319b74f29724 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t1042si-post.dtsi @@ -0,0 +1,37 @@ +/* + * T1042 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "t1040si-post.dtsi" + +/* Place holder for ethernet related device tree nodes */ diff --git a/arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi b/arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi new file mode 100644 index 000000000000..bbb7025ca9c2 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi @@ -0,0 +1,104 @@ +/* + * T1040/T1042 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +/include/ "e5500_power_isa.dtsi" + +/ { + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + ccsr = &soc; + dcsr = &dcsr; + + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + pci3 = &pci3; + usb0 = &usb0; + usb1 = &usb1; + sdhc = &sdhc; + + crypto = &crypto; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: PowerPC,e5500@0 { + device_type = "cpu"; + reg = <0>; + clocks = <&mux0>; + next-level-cache = <&L2_1>; + L2_1: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu1: PowerPC,e5500@1 { + device_type = "cpu"; + reg = <1>; + clocks = <&mux1>; + next-level-cache = <&L2_2>; + L2_2: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu2: PowerPC,e5500@2 { + device_type = "cpu"; + reg = <2>; + clocks = <&mux2>; + next-level-cache = <&L2_3>; + L2_3: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu3: PowerPC,e5500@3 { + device_type = "cpu"; + reg = <3>; + clocks = <&mux3>; + next-level-cache = <&L2_4>; + L2_4: l2-cache { + next-level-cache = <&cpc>; + }; + }; + }; +}; -- 2.20.1