From f8764406a8a9a6443048f9c5c8e512504684ed1a Mon Sep 17 00:00:00 2001 From: Subbaraya Sundeep Bhatta Date: Wed, 18 Nov 2015 18:20:31 +0530 Subject: [PATCH] usb: doc: dwc3-xilinx: Add devicetree bindings This patch adds binding doc for Xilinx DWC3 glue driver. Acked-by: Rob Herring Signed-off-by: Subbaraya Sundeep Bhatta Signed-off-by: Felipe Balbi --- .../devicetree/bindings/usb/dwc3-xilinx.txt | 33 +++++++++++++++++++ 1 file changed, 33 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/dwc3-xilinx.txt diff --git a/Documentation/devicetree/bindings/usb/dwc3-xilinx.txt b/Documentation/devicetree/bindings/usb/dwc3-xilinx.txt new file mode 100644 index 000000000000..30361b32a460 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/dwc3-xilinx.txt @@ -0,0 +1,33 @@ +Xilinx SuperSpeed DWC3 USB SoC controller + +Required properties: +- compatible: Should contain "xlnx,zynqmp-dwc3" +- clocks: A list of phandles for the clocks listed in clock-names +- clock-names: Should contain the following: + "bus_clk" Master/Core clock, have to be >= 125 MHz for SS + operation and >= 60MHz for HS operation + + "ref_clk" Clock source to core during PHY power down + +Required child node: +A child node must exist to represent the core DWC3 IP block. The name of +the node is not important. The content of the node is defined in dwc3.txt. + +Example device node: + + usb@0 { + #address-cells = <0x2>; + #size-cells = <0x1>; + status = "okay"; + compatible = "xlnx,zynqmp-dwc3"; + clock-names = "bus_clk" "ref_clk"; + clocks = <&clk125>, <&clk125>; + ranges; + + dwc3@fe200000 { + compatible = "snps,dwc3"; + reg = <0x0 0xfe200000 0x40000>; + interrupts = <0x0 0x41 0x4>; + dr_mode = "host"; + }; + }; -- 2.20.1