From f80b6dfd5e56f3908832ce89f96ae94352b616c2 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Mon, 13 Jun 2016 00:17:11 +0300 Subject: [PATCH] ARM: dts: blanche: add Ethernet support R8A7792 SoC doesn't have the EtherMAC core, so SMSC LAN89218 Ethernet chip was used instead on the Blanche board; this chip is compatible with SMSC LAN9115 for which there's a (device tree aware) driver. Describe the chip in the Blanche device tree; enable DHCP and NFS root in the kernel command line for the kernel booting. Signed-off-by: Sergei Shtylyov Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7792-blanche.dts | 23 ++++++++++++++++++++++- 1 file changed, 22 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/r8a7792-blanche.dts b/arch/arm/boot/dts/r8a7792-blanche.dts index e277d924441b..e7b40f0e7da6 100644 --- a/arch/arm/boot/dts/r8a7792-blanche.dts +++ b/arch/arm/boot/dts/r8a7792-blanche.dts @@ -22,7 +22,7 @@ }; chosen { - bootargs = "ignore_loglevel"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; stdout-path = "serial0:115200n8"; }; @@ -30,6 +30,27 @@ device_type = "memory"; reg = <0 0x40000000 0 0x40000000>; }; + + d3_3v: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "D3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ethernet@18000000 { + compatible = "smsc,lan89218", "smsc,lan9115"; + reg = <0 0x18000000 0 0x100>; + phy-mode = "mii"; + interrupt-parent = <&irqc>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + smsc,irq-push-pull; + reg-io-width = <4>; + vddvario-supply = <&d3_3v>; + vdd33a-supply = <&d3_3v>; + }; }; &extal_clk { -- 2.20.1