From f78ba15705a5ef36b55c4e3142724e2211cb1733 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 28 Nov 2007 16:21:54 -0800 Subject: [PATCH] revert "keyspan: init termios properly" Revert 7eea436433b7b18045f272562e256976f593f7c0. Lucy said: This patch will work with the 19HS but WILL BREAK all other Keyspan adapters. It will take me a few days to get to looking at a correct fix but that keyspan_send_setup(port, 1) (and the '1' is the important part) must happen once when the port is first opened. The cflag can just be set to whatever the normal default is for your serial environment. So revert this again pending the proper fix. Cc: Borislav Petkov Cc: Greg KH Cc: Alan Cox Cc: Lucy McCoy Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/usb/serial/keyspan.c | 32 +++++++++++++++++++++++++++++--- 1 file changed, 29 insertions(+), 3 deletions(-) diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index 1f7ab15df36d..feba9679ace8 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -1215,12 +1215,14 @@ static int keyspan_chars_in_buffer (struct usb_serial_port *port) static int keyspan_open (struct usb_serial_port *port, struct file *filp) { - struct keyspan_port_private *p_priv; - struct keyspan_serial_private *s_priv; - struct usb_serial *serial = port->serial; + struct keyspan_port_private *p_priv; + struct keyspan_serial_private *s_priv; + struct usb_serial *serial = port->serial; const struct keyspan_device_details *d_details; int i, err; + int baud_rate, device_port; struct urb *urb; + unsigned int cflag; s_priv = usb_get_serial_data(serial); p_priv = usb_get_serial_port_data(port); @@ -1263,6 +1265,30 @@ static int keyspan_open (struct usb_serial_port *port, struct file *filp) /* usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout(urb->pipe), 0); */ } + /* get the terminal config for the setup message now so we don't + * need to send 2 of them */ + + cflag = port->tty->termios->c_cflag; + device_port = port->number - port->serial->minor; + + /* Baud rate calculation takes baud rate as an integer + so other rates can be generated if desired. */ + baud_rate = tty_get_baud_rate(port->tty); + /* If no match or invalid, leave as default */ + if (baud_rate >= 0 + && d_details->calculate_baud_rate(baud_rate, d_details->baudclk, + NULL, NULL, NULL, device_port) == KEYSPAN_BAUD_RATE_OK) { + p_priv->baud = baud_rate; + } + + /* set CTS/RTS handshake etc. */ + p_priv->cflag = cflag; + p_priv->flow_control = (cflag & CRTSCTS)? flow_cts: flow_none; + + keyspan_send_setup(port, 1); + //mdelay(100); + //keyspan_set_termios(port, NULL); + return (0); } -- 2.20.1